// SPDX-License-Identifier: MIT
/*
 * Copyright © 2019 Intel Corporation
 *
 */

#include <drm/drm_print.h>
#include <drm/drm_vblank.h>

#include "i915_utils.h"
#include "intel_crtc.h"
#include "intel_de.h"
#include "intel_display_regs.h"
#include "intel_display_rpm.h"
#include "intel_display_types.h"
#include "intel_dsb.h"
#include "intel_dsb_buffer.h"
#include "intel_dsb_regs.h"
#include "intel_vblank.h"
#include "intel_vrr.h"
#include "skl_watermark.h"

#define CACHELINE_BYTES 64

struct intel_dsb {
	enum intel_dsb_id id;

	struct intel_dsb_buffer dsb_buf;
	struct intel_crtc *crtc;

	/*
	 * maximum number of dwords the buffer will hold.
	 */
	unsigned int size;

	/*
	 * free_pos will point the first free dword and
	 * help in calculating tail of command buffer.
	 */
	unsigned int free_pos;

	/*
	 * Previously emitted DSB instruction. Used to
	 * identify/adjust the instruction for indexed
	 * register writes.
	 */
	u32 ins[2];

	/*
	 * Start of the previously emitted DSB instruction.
	 * Used to adjust the instruction for indexed
	 * register writes.
	 */
	unsigned int ins_start_offset;

	u32 chicken;
	int hw_dewake_scanline;
};

/**
 * DOC: DSB
 *
 * A DSB (Display State Buffer) is a queue of MMIO instructions in the memory
 * which can be offloaded to DSB HW in Display Controller. DSB HW is a DMA
 * engine that can be programmed to download the DSB from memory.
 * It allows driver to batch submit display HW programming. This helps to
 * reduce loading time and CPU activity, thereby making the context switch
 * faster. DSB Support added from Gen12 Intel graphics based platform.
 *
 * DSB's can access only the pipe, plane, and transcoder Data Island Packet
 * registers.
 *
 * DSB HW can support only register writes (both indexed and direct MMIO
 * writes). There are no registers reads possible with DSB HW engine.
 */

/* DSB opcodes. */
#define DSB_OPCODE_SHIFT		24
#define DSB_OPCODE_NOOP			0x0
#define DSB_OPCODE_MMIO_WRITE		0x1
#define   DSB_BYTE_EN			0xf
#define   DSB_BYTE_EN_SHIFT		20
#define   DSB_REG_VALUE_MASK		0xfffff
#define DSB_OPCODE_WAIT_USEC		0x2
#define DSB_OPCODE_WAIT_SCANLINE	0x3
#define DSB_OPCODE_WAIT_VBLANKS		0x4
#define DSB_OPCODE_WAIT_DSL_IN		0x5
#define DSB_OPCODE_WAIT_DSL_OUT		0x6
#define   DSB_SCANLINE_UPPER_SHIFT	20
#define   DSB_SCANLINE_LOWER_SHIFT	0
#define DSB_OPCODE_INTERRUPT		0x7
#define DSB_OPCODE_INDEXED_WRITE	0x9
/* see DSB_REG_VALUE_MASK */
#define DSB_OPCODE_POLL			0xA
/* see DSB_REG_VALUE_MASK */
#define DSB_OPCODE_GOSUB		0xC /* ptl+ */
#define   DSB_GOSUB_HEAD_SHIFT		26
#define   DSB_GOSUB_TAIL_SHIFT		0
#define   DSB_GOSUB_CONVERT_ADDR(x)	((x) >> 6)

static bool pre_commit_is_vrr_active(struct intel_atomic_state *state,
				     struct intel_crtc *crtc)
{
	const struct intel_crtc_state *old_crtc_state =
		intel_atomic_get_old_crtc_state(state, crtc);
	const struct intel_crtc_state *new_crtc_state =
		intel_atomic_get_new_crtc_state(state, crtc);

	/* VRR will be enabled afterwards, if necessary */
	if (intel_crtc_needs_modeset(new_crtc_state))
		return false;

	/* VRR will have been disabled during intel_pre_plane_update() */
	return old_crtc_state->vrr.enable && !intel_crtc_vrr_disabling(state, crtc);
}

static int dsb_vblank_delay(struct intel_atomic_state *state,
			    struct intel_crtc *crtc)
{
	const struct intel_crtc_state *crtc_state =
		intel_pre_commit_crtc_state(state, crtc);

	if (pre_commit_is_vrr_active(state, crtc))
		/*
		 * When the push is sent during vblank it will trigger
		 * on the next scanline, hence we have up to one extra
		 * scanline until the delayed vblank occurs after
		 * TRANS_PUSH has been written.
		 */
		return intel_vrr_vblank_delay(crtc_state) + 1;
	else
		return intel_mode_vblank_delay(&crtc_state->hw.adjusted_mode);
}

static int dsb_vtotal(struct intel_atomic_state *state,
		      struct intel_crtc *crtc)
{
	const struct intel_crtc_state *crtc_state =
		intel_pre_commit_crtc_state(state, crtc);

	if (pre_commit_is_vrr_active(state, crtc))
		return intel_vrr_vmax_vtotal(crtc_state);
	else
		return intel_mode_vtotal(&crtc_state->hw.adjusted_mode);
}

static int dsb_dewake_scanline_start(struct intel_atomic_state *state,
				     struct intel_crtc *crtc)
{
	struct intel_display *display = to_intel_display(state);
	const struct intel_crtc_state *crtc_state =
		intel_pre_commit_crtc_state(state, crtc);
	unsigned int latency = skl_watermark_max_latency(display, 0);

	return intel_mode_vdisplay(&crtc_state->hw.adjusted_mode) -
		intel_usecs_to_scanlines(&crtc_state->hw.adjusted_mode, latency);
}

static int dsb_dewake_scanline_end(struct intel_atomic_state *state,
				   struct intel_crtc *crtc)
{
	const struct intel_crtc_state *crtc_state =
		intel_pre_commit_crtc_state(state, crtc);

	return intel_mode_vdisplay(&crtc_state->hw.adjusted_mode);
}

static int dsb_scanline_to_hw(struct intel_atomic_state *state,
			      struct intel_crtc *crtc, int scanline)
{
	const struct intel_crtc_state *crtc_state =
		intel_pre_commit_crtc_state(state, crtc);
	int vtotal = dsb_vtotal(state, crtc);

	return (scanline + vtotal - intel_crtc_scanline_offset(crtc_state)) % vtotal;
}

/*
 * Bspec suggests that we should always set DSB_SKIP_WAITS_EN. We have approach
 * different from what is explained in Bspec on how flip is considered being
 * complete. We are waiting for vblank in DSB and generate interrupt when it
 * happens and this interrupt is considered as indication of completion -> we
 * definitely do not want to skip vblank wait. We also have concern what comes
 * to skipping vblank evasion. I.e. arming registers are latched before we have
 * managed writing them. Due to these reasons we are not setting
 * DSB_SKIP_WAITS_EN.
 */
static u32 dsb_chicken(struct intel_atomic_state *state,
		       struct intel_crtc *crtc)
{
	if (pre_commit_is_vrr_active(state, crtc))
		return DSB_CTRL_WAIT_SAFE_WINDOW |
			DSB_CTRL_NO_WAIT_VBLANK |
			DSB_INST_WAIT_SAFE_WINDOW |
			DSB_INST_NO_WAIT_VBLANK;
	else
		return 0;
}

static bool assert_dsb_has_room(struct intel_dsb *dsb)
{
	struct intel_crtc *crtc = dsb->crtc;
	struct intel_display *display = to_intel_display(crtc->base.dev);

	/* each instruction is 2 dwords */
	return !drm_WARN(display->drm, dsb->free_pos > dsb->size - 2,
			 "[CRTC:%d:%s] DSB %d buffer overflow\n",
			 crtc->base.base.id, crtc->base.name, dsb->id);
}

static bool assert_dsb_tail_is_aligned(struct intel_dsb *dsb)
{
	struct intel_crtc *crtc = dsb->crtc;
	struct intel_display *display = to_intel_display(crtc->base.dev);

	return !drm_WARN_ON(display->drm,
			    !IS_ALIGNED(dsb->free_pos * 4, CACHELINE_BYTES));
}

static void intel_dsb_dump(struct intel_dsb *dsb)
{
	struct intel_crtc *crtc = dsb->crtc;
	struct intel_display *display = to_intel_display(crtc->base.dev);
	int i;

	drm_dbg_kms(display->drm, "[CRTC:%d:%s] DSB %d commands {\n",
		    crtc->base.base.id, crtc->base.name, dsb->id);
	for (i = 0; i < ALIGN(dsb->free_pos, 64 / 4); i += 4)
		drm_dbg_kms(display->drm,
			    " 0x%08x: 0x%08x 0x%08x 0x%08x 0x%08x\n", i * 4,
			    intel_dsb_buffer_read(&dsb->dsb_buf, i),
			    intel_dsb_buffer_read(&dsb->dsb_buf, i + 1),
			    intel_dsb_buffer_read(&dsb->dsb_buf, i + 2),
			    intel_dsb_buffer_read(&dsb->dsb_buf, i + 3));
	drm_dbg_kms(display->drm, "}\n");
}

static bool is_dsb_busy(struct intel_display *display, enum pipe pipe,
			enum intel_dsb_id dsb_id)
{
	return intel_de_read_fw(display, DSB_CTRL(pipe, dsb_id)) & DSB_STATUS_BUSY;
}

unsigned int intel_dsb_size(struct intel_dsb *dsb)
{
	return dsb->free_pos * 4;
}

unsigned int intel_dsb_head(struct intel_dsb *dsb)
{
	return intel_dsb_buffer_ggtt_offset(&dsb->dsb_buf);
}

static unsigned int intel_dsb_tail(struct intel_dsb *dsb)
{
	return intel_dsb_buffer_ggtt_offset(&dsb->dsb_buf) + intel_dsb_size(dsb);
}

static void intel_dsb_ins_align(struct intel_dsb *dsb)
{
	/*
	 * Every instruction should be 8 byte aligned.
	 *
	 * The only way to get unaligned free_pos is via
	 * intel_dsb_reg_write_indexed() which already
	 * makes sure the next dword is zeroed, so no need
	 * to clear it here.
	 */
	dsb->free_pos = ALIGN(dsb->free_pos, 2);
}

static void intel_dsb_emit(struct intel_dsb *dsb, u32 ldw, u32 udw)
{
	if (!assert_dsb_has_room(dsb))
		return;

	intel_dsb_ins_align(dsb);

	dsb->ins_start_offset = dsb->free_pos;
	dsb->ins[0] = ldw;
	dsb->ins[1] = udw;

	intel_dsb_buffer_write(&dsb->dsb_buf, dsb->free_pos++, dsb->ins[0]);
	intel_dsb_buffer_write(&dsb->dsb_buf, dsb->free_pos++, dsb->ins[1]);
}

static bool intel_dsb_prev_ins_is_write(struct intel_dsb *dsb,
					u32 opcode, i915_reg_t reg)
{
	u32 prev_opcode, prev_reg;

	/*
	 * Nothing emitted yet? Must check before looking
	 * at the actual data since i915_gem_object_create_internal()
	 * does *not* give you zeroed memory!
	 */
	if (dsb->free_pos == 0)
		return false;

	prev_opcode = dsb->ins[1] & ~DSB_REG_VALUE_MASK;
	prev_reg =  dsb->ins[1] & DSB_REG_VALUE_MASK;

	return prev_opcode == opcode && prev_reg == i915_mmio_reg_offset(reg);
}

static bool intel_dsb_prev_ins_is_indexed_write(struct intel_dsb *dsb, i915_reg_t reg)
{
	return intel_dsb_prev_ins_is_write(dsb,
					   DSB_OPCODE_INDEXED_WRITE << DSB_OPCODE_SHIFT,
					   reg);
}

/**
 * intel_dsb_reg_write_indexed() - Emit indexed register write to the DSB context
 * @dsb: DSB context
 * @reg: register address.
 * @val: value.
 *
 * This function is used for writing register-value pair in command
 * buffer of DSB.
 *
 * Note that indexed writes are slower than normal MMIO writes
 * for a small number (less than 5 or so) of writes to the same
 * register.
 */
void intel_dsb_reg_write_indexed(struct intel_dsb *dsb,
				 i915_reg_t reg, u32 val)
{
	/*
	 * For example the buffer will look like below for 3 dwords for auto
	 * increment register:
	 * +--------------------------------------------------------+
	 * | size = 3 | offset &| value1 | value2 | value3 | zero   |
	 * |          | opcode  |        |        |        |        |
	 * +--------------------------------------------------------+
	 * +          +         +        +        +        +        +
	 * 0          4         8        12       16       20       24
	 * Byte
	 *
	 * As every instruction is 8 byte aligned the index of dsb instruction
	 * will start always from even number while dealing with u32 array. If
	 * we are writing odd no of dwords, Zeros will be added in the end for
	 * padding.
	 */
	if (!intel_dsb_prev_ins_is_indexed_write(dsb, reg))
		intel_dsb_emit(dsb, 0, /* count */
			       (DSB_OPCODE_INDEXED_WRITE << DSB_OPCODE_SHIFT) |
			       i915_mmio_reg_offset(reg));

	if (!assert_dsb_has_room(dsb))
		return;

	/* Update the count */
	dsb->ins[0]++;
	intel_dsb_buffer_write(&dsb->dsb_buf, dsb->ins_start_offset + 0,
			       dsb->ins[0]);

	intel_dsb_buffer_write(&dsb->dsb_buf, dsb->free_pos++, val);
	/* if number of data words is odd, then the last dword should be 0.*/
	if (dsb->free_pos & 0x1)
		intel_dsb_buffer_write(&dsb->dsb_buf, dsb->free_pos, 0);
}

void intel_dsb_reg_write(struct intel_dsb *dsb,
			 i915_reg_t reg, u32 val)
{
	intel_dsb_emit(dsb, val,
		       (DSB_OPCODE_MMIO_WRITE << DSB_OPCODE_SHIFT) |
		       (DSB_BYTE_EN << DSB_BYTE_EN_SHIFT) |
		       i915_mmio_reg_offset(reg));
}

static u32 intel_dsb_mask_to_byte_en(u32 mask)
{
	return (!!(mask & 0xff000000) << 3 |
		!!(mask & 0x00ff0000) << 2 |
		!!(mask & 0x0000ff00) << 1 |
		!!(mask & 0x000000ff) << 0);
}

/* Note: mask implemented via byte enables! */
void intel_dsb_reg_write_masked(struct intel_dsb *dsb,
				i915_reg_t reg, u32 mask, u32 val)
{
	intel_dsb_emit(dsb, val,
		       (DSB_OPCODE_MMIO_WRITE << DSB_OPCODE_SHIFT) |
		       (intel_dsb_mask_to_byte_en(mask) << DSB_BYTE_EN_SHIFT) |
		       i915_mmio_reg_offset(reg));
}

void intel_dsb_noop(struct intel_dsb *dsb, int count)
{
	int i;

	for (i = 0; i < count; i++)
		intel_dsb_emit(dsb, 0,
			       DSB_OPCODE_NOOP << DSB_OPCODE_SHIFT);
}

void intel_dsb_nonpost_start(struct intel_dsb *dsb)
{
	struct intel_crtc *crtc = dsb->crtc;
	enum pipe pipe = crtc->pipe;

	intel_dsb_reg_write_masked(dsb, DSB_CTRL(pipe, dsb->id),
				   DSB_NON_POSTED, DSB_NON_POSTED);
	intel_dsb_noop(dsb, 4);
}

void intel_dsb_nonpost_end(struct intel_dsb *dsb)
{
	struct intel_crtc *crtc = dsb->crtc;
	enum pipe pipe = crtc->pipe;

	intel_dsb_reg_write_masked(dsb, DSB_CTRL(pipe, dsb->id),
				   DSB_NON_POSTED, 0);
	intel_dsb_noop(dsb, 4);
}

void intel_dsb_interrupt(struct intel_dsb *dsb)
{
	intel_dsb_emit(dsb, 0,
		       DSB_OPCODE_INTERRUPT << DSB_OPCODE_SHIFT);
}

void intel_dsb_wait_usec(struct intel_dsb *dsb, int count)
{
	/* +1 to make sure we never wait less time than asked for */
	intel_dsb_emit(dsb, count + 1,
		       DSB_OPCODE_WAIT_USEC << DSB_OPCODE_SHIFT);
}

void intel_dsb_wait_vblanks(struct intel_dsb *dsb, int count)
{
	intel_dsb_emit(dsb, count,
		       DSB_OPCODE_WAIT_VBLANKS << DSB_OPCODE_SHIFT);
}

static void intel_dsb_emit_wait_dsl(struct intel_dsb *dsb,
				    u32 opcode, int lower, int upper)
{
	u64 window = ((u64)upper << DSB_SCANLINE_UPPER_SHIFT) |
		((u64)lower << DSB_SCANLINE_LOWER_SHIFT);

	intel_dsb_emit(dsb, lower_32_bits(window),
		       (opcode << DSB_OPCODE_SHIFT) |
		       upper_32_bits(window));
}

static void intel_dsb_wait_dsl(struct intel_atomic_state *state,
			       struct intel_dsb *dsb,
			       int lower_in, int upper_in,
			       int lower_out, int upper_out)
{
	struct intel_crtc *crtc = dsb->crtc;

	lower_in = dsb_scanline_to_hw(state, crtc, lower_in);
	upper_in = dsb_scanline_to_hw(state, crtc, upper_in);

	lower_out = dsb_scanline_to_hw(state, crtc, lower_out);
	upper_out = dsb_scanline_to_hw(state, crtc, upper_out);

	if (upper_in >= lower_in)
		intel_dsb_emit_wait_dsl(dsb, DSB_OPCODE_WAIT_DSL_IN,
					lower_in, upper_in);
	else if (upper_out >= lower_out)
		intel_dsb_emit_wait_dsl(dsb, DSB_OPCODE_WAIT_DSL_OUT,
					lower_out, upper_out);
	else
		drm_WARN_ON(crtc->base.dev, 1); /* assert_dsl_ok() should have caught it already */
}

static void assert_dsl_ok(struct intel_atomic_state *state,
			  struct intel_dsb *dsb,
			  int start, int end)
{
	struct intel_crtc *crtc = dsb->crtc;
	int vtotal = dsb_vtotal(state, crtc);

	/*
	 * Waiting for the entire frame doesn't make sense,
	 * (IN==don't wait, OUT=wait forever).
	 */
	drm_WARN(crtc->base.dev, (end - start + vtotal) % vtotal == vtotal - 1,
		 "[CRTC:%d:%s] DSB %d bad scanline window wait: %d-%d (vt=%d)\n",
		 crtc->base.base.id, crtc->base.name, dsb->id,
		 start, end, vtotal);
}

void intel_dsb_wait_scanline_in(struct intel_atomic_state *state,
				struct intel_dsb *dsb,
				int start, int end)
{
	assert_dsl_ok(state, dsb, start, end);

	intel_dsb_wait_dsl(state, dsb,
			   start, end,
			   end + 1, start - 1);
}

void intel_dsb_wait_scanline_out(struct intel_atomic_state *state,
				 struct intel_dsb *dsb,
				 int start, int end)
{
	assert_dsl_ok(state, dsb, start, end);

	intel_dsb_wait_dsl(state, dsb,
			   end + 1, start - 1,
			   start, end);
}

void intel_dsb_poll(struct intel_dsb *dsb,
		    i915_reg_t reg, u32 mask, u32 val,
		    int wait_us, int count)
{
	struct intel_crtc *crtc = dsb->crtc;
	enum pipe pipe = crtc->pipe;

	intel_dsb_reg_write(dsb, DSB_POLLMASK(pipe, dsb->id), mask);
	intel_dsb_reg_write(dsb, DSB_POLLFUNC(pipe, dsb->id),
			    DSB_POLL_ENABLE |
			    DSB_POLL_WAIT(wait_us) | DSB_POLL_COUNT(count));

	intel_dsb_noop(dsb, 5);

	intel_dsb_emit(dsb, val,
		       (DSB_OPCODE_POLL << DSB_OPCODE_SHIFT) |
		       i915_mmio_reg_offset(reg));
}

static void intel_dsb_align_tail(struct intel_dsb *dsb)
{
	u32 aligned_tail, tail;

	intel_dsb_ins_align(dsb);

	tail = dsb->free_pos * 4;
	aligned_tail = ALIGN(tail, CACHELINE_BYTES);

	if (aligned_tail > tail)
		intel_dsb_buffer_memset(&dsb->dsb_buf, dsb->free_pos, 0,
					aligned_tail - tail);

	dsb->free_pos = aligned_tail / 4;
}

static void intel_dsb_gosub_align(struct intel_dsb *dsb)
{
	u32 aligned_tail, tail;

	intel_dsb_ins_align(dsb);

	tail = dsb->free_pos * 4;
	aligned_tail = ALIGN(tail, CACHELINE_BYTES);

	/*
	 * Wa_16024917128
	 * "Ensure GOSUB is not placed in cacheline QW slot 6 or 7 (numbered 0-7)"
	 */
	if (aligned_tail - tail <= 2 * 8)
		intel_dsb_buffer_memset(&dsb->dsb_buf, dsb->free_pos, 0,
					aligned_tail - tail);

	dsb->free_pos = aligned_tail / 4;
}

void intel_dsb_gosub(struct intel_dsb *dsb,
		     struct intel_dsb *sub_dsb)
{
	struct intel_crtc *crtc = dsb->crtc;
	struct intel_display *display = to_intel_display(crtc->base.dev);
	unsigned int head, tail;
	u64 head_tail;

	if (drm_WARN_ON(display->drm, dsb->id != sub_dsb->id))
		return;

	if (!assert_dsb_tail_is_aligned(sub_dsb))
		return;

	intel_dsb_gosub_align(dsb);

	head = intel_dsb_head(sub_dsb);
	tail = intel_dsb_tail(sub_dsb);

	/*
	 * The GOSUB instruction has the following memory layout.
	 *
	 * +------------------------------------------------------------+
	 * |  Opcode  |   Rsvd    |      Head Ptr     |     Tail Ptr    |
	 * |   0x0c   |           |                   |                 |
	 * +------------------------------------------------------------+
	 * |<- 8bits->|<- 4bits ->|<--   26bits    -->|<--  26bits   -->|
	 *
	 * We have only 26 bits each to represent the head and  tail
	 * pointers even though the addresses itself are of 32 bit. However, this
	 * is not a problem because the addresses are 64 bit aligned and therefore
	 * the last 6 bits are always Zero's. Therefore, we right shift the address
	 * by 6 before embedding it into the GOSUB instruction.
	 */

	head_tail = ((u64)(DSB_GOSUB_CONVERT_ADDR(head)) << DSB_GOSUB_HEAD_SHIFT) |
		((u64)(DSB_GOSUB_CONVERT_ADDR(tail)) << DSB_GOSUB_TAIL_SHIFT);

	intel_dsb_emit(dsb, lower_32_bits(head_tail),
		       (DSB_OPCODE_GOSUB << DSB_OPCODE_SHIFT) |
		       upper_32_bits(head_tail));

	/*
	 * "NOTE: the instructions within the cacheline
	 *  FOLLOWING the GOSUB instruction must be NOPs."
	 */
	intel_dsb_align_tail(dsb);
}

void intel_dsb_gosub_finish(struct intel_dsb *dsb)
{
	intel_dsb_align_tail(dsb);

	/*
	 * Wa_16024917128
	 * "Ensure that all subroutines called by GOSUB end with a cacheline of NOPs"
	 */
	intel_dsb_noop(dsb, 8);

	intel_dsb_buffer_flush_map(&dsb->dsb_buf);
}

void intel_dsb_finish(struct intel_dsb *dsb)
{
	intel_dsb_align_tail(dsb);

	intel_dsb_buffer_flush_map(&dsb->dsb_buf);
}

static u32 dsb_error_int_status(struct intel_display *display)
{
	u32 errors;

	errors = DSB_GTT_FAULT_INT_STATUS |
		DSB_RSPTIMEOUT_INT_STATUS |
		DSB_POLL_ERR_INT_STATUS;

	/*
	 * All the non-existing status bits operate as
	 * normal r/w bits, so any attempt to clear them
	 * will just end up setting them. Never do that so
	 * we won't mistake them for actual error interrupts.
	 */
	if (DISPLAY_VER(display) >= 14)
		errors |= DSB_ATS_FAULT_INT_STATUS;

	if (DISPLAY_VER(display) >= 30)
		errors |= DSB_GOSUB_INT_STATUS;

	return errors;
}

static u32 dsb_error_int_en(struct intel_display *display)
{
	u32 errors;

	errors = DSB_GTT_FAULT_INT_EN |
		DSB_RSPTIMEOUT_INT_EN |
		DSB_POLL_ERR_INT_EN;

	if (DISPLAY_VER(display) >= 14)
		errors |= DSB_ATS_FAULT_INT_EN;

	/*
	 * Wa_16024917128
	 * "Disable nested GOSUB interrupt (DSB_INTERRUPT bit 21)"
	 */
	if (0 && DISPLAY_VER(display) >= 30)
		errors |= DSB_GOSUB_INT_EN;

	return errors;
}

/*
 * FIXME calibrate these sensibly, ideally compute based on
 * the number of regisetrs to be written. But that requires
 * measuring the actual DSB execution speed on each platform
 * (and the speed also depends on CDCLK and memory clock)...
 */
static int intel_dsb_noarm_exec_time_us(void)
{
	return 80;
}

static int intel_dsb_arm_exec_time_us(void)
{
	return 20;
}

int intel_dsb_exec_time_us(void)
{
	return intel_dsb_noarm_exec_time_us() +
		intel_dsb_arm_exec_time_us();
}

void intel_dsb_vblank_evade(struct intel_atomic_state *state,
			    struct intel_dsb *dsb)
{
	struct intel_crtc *crtc = dsb->crtc;
	const struct intel_crtc_state *crtc_state =
		intel_pre_commit_crtc_state(state, crtc);
	int latency = intel_usecs_to_scanlines(&crtc_state->hw.adjusted_mode,
					       intel_dsb_arm_exec_time_us());
	int start, end;

	/*
	 * PIPEDSL is reading as 0 when in SRDENT(PSR1) or DEEP_SLEEP(PSR2). On
	 * wake-up scanline counting starts from vblank_start - 1. We don't know
	 * if wake-up is already ongoing when evasion starts. In worst case
	 * PIPEDSL could start reading valid value right after checking the
	 * scanline. In this scenario we wouldn't have enough time to write all
	 * registers. To tackle this evade scanline 0 as well. As a drawback we
	 * have 1 frame delay in flip when waking up.
	 */
	if (crtc_state->has_psr)
		intel_dsb_emit_wait_dsl(dsb, DSB_OPCODE_WAIT_DSL_OUT, 0, 0);

	if (pre_commit_is_vrr_active(state, crtc)) {
		int vblank_delay = intel_vrr_vblank_delay(crtc_state);

		end = intel_vrr_vmin_vblank_start(crtc_state);
		start = end - vblank_delay - latency;
		intel_dsb_wait_scanline_out(state, dsb, start, end);

		end = intel_vrr_vmax_vblank_start(crtc_state);
		start = end - vblank_delay - latency;
		intel_dsb_wait_scanline_out(state, dsb, start, end);
	} else {
		int vblank_delay = intel_mode_vblank_delay(&crtc_state->hw.adjusted_mode);

		end = intel_mode_vblank_start(&crtc_state->hw.adjusted_mode);
		start = end - vblank_delay - latency;
		intel_dsb_wait_scanline_out(state, dsb, start, end);
	}
}

static void _intel_dsb_chain(struct intel_atomic_state *state,
			     struct intel_dsb *dsb,
			     struct intel_dsb *chained_dsb,
			     u32 ctrl)
{
	struct intel_display *display = to_intel_display(state->base.dev);
	struct intel_crtc *crtc = dsb->crtc;
	enum pipe pipe = crtc->pipe;

	if (drm_WARN_ON(display->drm, dsb->id == chained_dsb->id))
		return;

	if (!assert_dsb_tail_is_aligned(chained_dsb))
		return;

	intel_dsb_reg_write(dsb, DSB_CTRL(pipe, chained_dsb->id),
			    ctrl | DSB_ENABLE);

	intel_dsb_reg_write(dsb, DSB_CHICKEN(pipe, chained_dsb->id),
			    dsb_chicken(state, crtc));

	intel_dsb_reg_write(dsb, DSB_INTERRUPT(pipe, chained_dsb->id),
			    dsb_error_int_status(display) | DSB_PROG_INT_STATUS |
			    dsb_error_int_en(display) | DSB_PROG_INT_EN);

	if (ctrl & DSB_WAIT_FOR_VBLANK) {
		int dewake_scanline = dsb_dewake_scanline_start(state, crtc);
		int hw_dewake_scanline = dsb_scanline_to_hw(state, crtc, dewake_scanline);

		intel_dsb_reg_write(dsb, DSB_PMCTRL(pipe, chained_dsb->id),
				    DSB_ENABLE_DEWAKE |
				    DSB_SCANLINE_FOR_DEWAKE(hw_dewake_scanline));
	} else {
		intel_dsb_reg_write(dsb, DSB_PMCTRL(pipe, chained_dsb->id), 0);
	}

	intel_dsb_reg_write(dsb, DSB_HEAD(pipe, chained_dsb->id),
			    intel_dsb_head(chained_dsb));

	intel_dsb_reg_write(dsb, DSB_TAIL(pipe, chained_dsb->id),
			    intel_dsb_tail(chained_dsb));

	if (ctrl & DSB_WAIT_FOR_VBLANK) {
		/*
		 * Keep DEwake alive via the first DSB, in
		 * case we're already past dewake_scanline,
		 * and thus DSB_ENABLE_DEWAKE on the second
		 * DSB won't do its job.
		 */
		intel_dsb_reg_write_masked(dsb, DSB_PMCTRL_2(pipe, dsb->id),
					   DSB_FORCE_DEWAKE, DSB_FORCE_DEWAKE);

		intel_dsb_wait_scanline_out(state, dsb,
					    dsb_dewake_scanline_start(state, crtc),
					    dsb_dewake_scanline_end(state, crtc));

		/*
		 * DSB_FORCE_DEWAKE remains active even after DSB is
		 * disabled, so make sure to clear it.
		 */
		intel_dsb_reg_write_masked(dsb, DSB_PMCTRL_2(crtc->pipe, dsb->id),
					   DSB_FORCE_DEWAKE, 0);
	}
}

void intel_dsb_chain(struct intel_atomic_state *state,
		     struct intel_dsb *dsb,
		     struct intel_dsb *chained_dsb,
		     bool wait_for_vblank)
{
	_intel_dsb_chain(state, dsb, chained_dsb,
			 wait_for_vblank ? DSB_WAIT_FOR_VBLANK : 0);
}

void intel_dsb_wait_vblank_delay(struct intel_atomic_state *state,
				 struct intel_dsb *dsb)
{
	struct intel_crtc *crtc = dsb->crtc;
	const struct intel_crtc_state *crtc_state =
		intel_pre_commit_crtc_state(state, crtc);
	int usecs = intel_scanlines_to_usecs(&crtc_state->hw.adjusted_mode,
					     dsb_vblank_delay(state, crtc));

	intel_dsb_wait_usec(dsb, usecs);
}

/**
 * intel_dsb_commit() - Trigger workload execution of DSB.
 * @dsb: DSB context
 *
 * This function is used to do actual write to hardware using DSB.
 */
void intel_dsb_commit(struct intel_dsb *dsb)
{
	struct intel_crtc *crtc = dsb->crtc;
	struct intel_display *display = to_intel_display(crtc->base.dev);
	enum pipe pipe = crtc->pipe;

	if (!assert_dsb_tail_is_aligned(dsb))
		return;

	if (is_dsb_busy(display, pipe, dsb->id)) {
		drm_err(display->drm, "[CRTC:%d:%s] DSB %d is busy\n",
			crtc->base.base.id, crtc->base.name, dsb->id);
		return;
	}

	intel_de_write_fw(display, DSB_CTRL(pipe, dsb->id),
			  DSB_ENABLE);

	intel_de_write_fw(display, DSB_CHICKEN(pipe, dsb->id),
			  dsb->chicken);

	intel_de_write_fw(display, DSB_INTERRUPT(pipe, dsb->id),
			  dsb_error_int_status(display) | DSB_PROG_INT_STATUS |
			  dsb_error_int_en(display) | DSB_PROG_INT_EN);

	intel_de_write_fw(display, DSB_PMCTRL(pipe, dsb->id), 0);

	intel_de_write_fw(display, DSB_HEAD(pipe, dsb->id),
			  intel_dsb_head(dsb));

	intel_de_write_fw(display, DSB_TAIL(pipe, dsb->id),
			  intel_dsb_tail(dsb));
}

void intel_dsb_wait(struct intel_dsb *dsb)
{
	struct intel_crtc *crtc = dsb->crtc;
	struct intel_display *display = to_intel_display(crtc->base.dev);
	enum pipe pipe = crtc->pipe;

	if (wait_for(!is_dsb_busy(display, pipe, dsb->id), 1)) {
		u32 offset = intel_dsb_buffer_ggtt_offset(&dsb->dsb_buf);

		intel_de_write_fw(display, DSB_CTRL(pipe, dsb->id),
				  DSB_ENABLE | DSB_HALT);

		drm_err(display->drm,
			"[CRTC:%d:%s] DSB %d timed out waiting for idle (current head=0x%x, head=0x%x, tail=0x%x)\n",
			crtc->base.base.id, crtc->base.name, dsb->id,
			intel_de_read_fw(display, DSB_CURRENT_HEAD(pipe, dsb->id)) - offset,
			intel_de_read_fw(display, DSB_HEAD(pipe, dsb->id)) - offset,
			intel_de_read_fw(display, DSB_TAIL(pipe, dsb->id)) - offset);

		intel_dsb_dump(dsb);
	}

	/* Attempt to reset it */
	dsb->free_pos = 0;
	dsb->ins_start_offset = 0;
	dsb->ins[0] = 0;
	dsb->ins[1] = 0;

	intel_de_write_fw(display, DSB_CTRL(pipe, dsb->id), 0);

	intel_de_write_fw(display, DSB_INTERRUPT(pipe, dsb->id),
			  dsb_error_int_status(display) | DSB_PROG_INT_STATUS);
}

/**
 * intel_dsb_prepare() - Allocate, pin and map the DSB command buffer.
 * @state: the atomic state
 * @crtc: the CRTC
 * @dsb_id: the DSB engine to use
 * @max_cmds: number of commands we need to fit into command buffer
 *
 * This function prepare the command buffer which is used to store dsb
 * instructions with data.
 *
 * Returns:
 * DSB context, NULL on failure
 */
struct intel_dsb *intel_dsb_prepare(struct intel_atomic_state *state,
				    struct intel_crtc *crtc,
				    enum intel_dsb_id dsb_id,
				    unsigned int max_cmds)
{
	struct intel_display *display = to_intel_display(state);
	struct ref_tracker *wakeref;
	struct intel_dsb *dsb;
	unsigned int size;

	if (!HAS_DSB(display))
		return NULL;

	if (!display->params.enable_dsb)
		return NULL;

	dsb = kzalloc(sizeof(*dsb), GFP_KERNEL);
	if (!dsb)
		goto out;

	wakeref = intel_display_rpm_get(display);

	/* ~1 qword per instruction, full cachelines */
	size = ALIGN(max_cmds * 8, CACHELINE_BYTES);

	if (!intel_dsb_buffer_create(crtc, &dsb->dsb_buf, size))
		goto out_put_rpm;

	intel_display_rpm_put(display, wakeref);

	dsb->id = dsb_id;
	dsb->crtc = crtc;
	dsb->size = size / 4; /* in dwords */

	dsb->chicken = dsb_chicken(state, crtc);
	dsb->hw_dewake_scanline =
		dsb_scanline_to_hw(state, crtc, dsb_dewake_scanline_start(state, crtc));

	return dsb;

out_put_rpm:
	intel_display_rpm_put(display, wakeref);
	kfree(dsb);
out:
	drm_info_once(display->drm,
		      "[CRTC:%d:%s] DSB %d queue setup failed, will fallback to MMIO for display HW programming\n",
		      crtc->base.base.id, crtc->base.name, dsb_id);

	return NULL;
}

/**
 * intel_dsb_cleanup() - To cleanup DSB context.
 * @dsb: DSB context
 *
 * This function cleanup the DSB context by unpinning and releasing
 * the VMA object associated with it.
 */
void intel_dsb_cleanup(struct intel_dsb *dsb)
{
	intel_dsb_buffer_cleanup(&dsb->dsb_buf);
	kfree(dsb);
}

void intel_dsb_irq_handler(struct intel_display *display,
			   enum pipe pipe, enum intel_dsb_id dsb_id)
{
	struct intel_crtc *crtc = intel_crtc_for_pipe(display, pipe);
	u32 tmp, errors;

	tmp = intel_de_read_fw(display, DSB_INTERRUPT(pipe, dsb_id));
	intel_de_write_fw(display, DSB_INTERRUPT(pipe, dsb_id), tmp);

	if (tmp & DSB_PROG_INT_STATUS) {
		spin_lock(&display->drm->event_lock);

		if (crtc->dsb_event) {
			/*
			 * Update vblank counter/timestamp in case it
			 * hasn't been done yet for this frame.
			 */
			drm_crtc_accurate_vblank_count(&crtc->base);

			drm_crtc_send_vblank_event(&crtc->base, crtc->dsb_event);
			crtc->dsb_event = NULL;
		}

		spin_unlock(&display->drm->event_lock);
	}

	errors = tmp & dsb_error_int_status(display);
	if (errors & DSB_ATS_FAULT_INT_STATUS)
		drm_err(display->drm, "[CRTC:%d:%s] DSB %d ATS fault\n",
			crtc->base.base.id, crtc->base.name, dsb_id);
	if (errors & DSB_GTT_FAULT_INT_STATUS)
		drm_err(display->drm, "[CRTC:%d:%s] DSB %d GTT fault\n",
			crtc->base.base.id, crtc->base.name, dsb_id);
	if (errors & DSB_RSPTIMEOUT_INT_STATUS)
		drm_err(display->drm, "[CRTC:%d:%s] DSB %d response timeout\n",
			crtc->base.base.id, crtc->base.name, dsb_id);
	if (errors & DSB_POLL_ERR_INT_STATUS)
		drm_err(display->drm, "[CRTC:%d:%s] DSB %d poll error\n",
			crtc->base.base.id, crtc->base.name, dsb_id);
	if (errors & DSB_GOSUB_INT_STATUS)
		drm_err(display->drm, "[CRTC:%d:%s] DSB %d GOSUB programming error\n",
			crtc->base.base.id, crtc->base.name, dsb_id);
}