# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/iio/adc/adi,axi-adc.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Analog Devices AXI ADC IP core

maintainers:
  - Michael Hennerich <michael.hennerich@analog.com>

description: |
  Analog Devices Generic AXI ADC IP core for interfacing an ADC device
  with a high speed serial (JESD204B/C) or source synchronous parallel
  interface (LVDS/CMOS).
  Usually, some other interface type (i.e SPI) is used as a control
  interface for the actual ADC, while this IP core will interface
  to the data-lines of the ADC and handle the streaming of data into
  memory via DMA.
  In some cases, the AXI ADC interface is used to perform specialized
  operation to a particular ADC, e.g access the physical bus through
  specific registers to write ADC registers.
  In this case, we use a different compatible which indicates the target
  IP core's name.
  The following IP is currently supported:
    - AXI AD7606x: specialized version of the IP core for all the chips from
      the ad7606 family.

  https://wiki.analog.com/resources/fpga/docs/axi_adc_ip
  https://analogdevicesinc.github.io/hdl/library/axi_ad408x/index.html
  https://analogdevicesinc.github.io/hdl/library/axi_ad485x/index.html
  http://analogdevicesinc.github.io/hdl/library/axi_ad7606x/index.html

properties:
  compatible:
    enum:
      - adi,axi-adc-10.0.a
      - adi,axi-ad408x
      - adi,axi-ad7606x
      - adi,axi-ad485x

  reg:
    maxItems: 1

  clocks:
    maxItems: 1

  dmas:
    maxItems: 1

  dma-names:
    items:
      - const: rx

  adi,adc-dev:
    $ref: /schemas/types.yaml#/definitions/phandle
    description:
      A reference to a the actual ADC to which this FPGA ADC interfaces to.
    deprecated: true

  '#io-backend-cells':
    const: 0

  '#address-cells':
    const: 1

  '#size-cells':
    const: 0

patternProperties:
  "^adc@[0-9a-f]+$":
    type: object
    properties:
      reg:
        maxItems: 1
    additionalProperties: true
    required:
      - compatible
      - reg

required:
  - compatible
  - dmas
  - reg
  - clocks

allOf:
  - if:
      properties:
        compatible:
          not:
            contains:
              const: adi,axi-ad7606x
    then:
      properties:
        '#address-cells': false
        '#size-cells': false
      patternProperties:
        "^adc@[0-9a-f]+$": false

additionalProperties: false

examples:
  - |
    adc@44a00000 {
        compatible = "adi,axi-adc-10.0.a";
        reg = <0x44a00000 0x10000>;
        dmas = <&rx_dma 0>;
        dma-names = "rx";
        clocks = <&axi_clk>;
        #io-backend-cells = <0>;
    };
  - |
    #include <dt-bindings/gpio/gpio.h>
    parallel_bus_controller@44a00000 {
        compatible = "adi,axi-ad7606x";
        reg = <0x44a00000 0x10000>;
        dmas = <&rx_dma 0>;
        dma-names = "rx";
        clocks = <&ext_clk>;
        #address-cells = <1>;
        #size-cells = <0>;

        adc@0 {
            compatible = "adi,ad7606b";
            reg = <0>;
            pwms = <&axi_pwm_gen 0 0>;
            pwm-names = "convst1";
            avcc-supply = <&adc_vref>;
            vdrive-supply = <&vdd_supply>;
            reset-gpios = <&gpio0 91 GPIO_ACTIVE_HIGH>;
            standby-gpios = <&gpio0 90 GPIO_ACTIVE_LOW>;
            adi,range-gpios = <&gpio0 89 GPIO_ACTIVE_HIGH>;
            adi,oversampling-ratio-gpios = <&gpio0 88 GPIO_ACTIVE_HIGH
                            &gpio0 87 GPIO_ACTIVE_HIGH
                            &gpio0 86 GPIO_ACTIVE_HIGH>;
            io-backends = <&parallel_bus_controller>;
        };
    };
...