# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
# Copyright 2024 Analog Devices Inc.
%YAML 1.2
---
$id: http://devicetree.org/schemas/iio/dac/adi,ad8460.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Analog Devices AD8460 DAC

maintainers:
  - Mariel Tinaco <mariel.tinaco@analog.com>

description: |
  Analog Devices AD8460 110 V High Voltage, 1 A High Current,
  Arbitrary Waveform Generator with Integrated 14-Bit High Speed DAC
  https://www.analog.com/media/en/technical-documentation/data-sheets/ad8460.pdf

properties:
  compatible:
    enum:
      - adi,ad8460

  reg:
    maxItems: 1

  clocks:
    maxItems: 1

  dmas:
    maxItems: 1

  dma-names:
    items:
      - const: tx

  spi-max-frequency:
    maximum: 20000000

  hvcc-supply:
    description: Positive high voltage power supply line

  hvee-supply:
    description: Negative high voltage power supply line

  vcc-5v-supply:
    description: Low voltage power supply

  vref-5v-supply:
    description: Reference voltage for analog low voltage

  dvdd-3p3v-supply:
    description: Digital supply bypass

  avdd-3p3v-supply:
    description: Analog supply bypass

  refio-1p2v-supply:
    description: Drive voltage in the range of 1.2V maximum to as low as
      low as 0.12V through the REF_IO pin to adjust full scale output span

  adi,external-resistor-ohms:
    description: Specify value of external resistor connected to FS_ADJ pin
      to establish internal HVDAC's reference current I_REF
    minimum: 2000
    maximum: 20000
    default: 2000

  adi,range-microvolt:
    description: Voltage output range specified as <minimum, maximum>
    items:
      - minimum: -55000000
        maximum: 0
        default: 0
      - minimum: 0
        maximum: 55000000
        default: 0

  adi,range-microamp:
    description: Current output range specified as <minimum, maximum>
    items:
      - minimum: -1000000
        maximum: 0
        default: 0
      - minimum: 0
        maximum: 1000000
        default: 0

  adi,max-millicelsius:
    description: Overtemperature threshold
    minimum: 0
    maximum: 150000
    default: 0

  shutdown-reset-gpios:
    description: Corresponds to SDN_RESET pin. To exit shutdown
      or sleep mode, pulse SDN_RESET HIGH, then leave LOW.
    maxItems: 1

  reset-gpios:
    description: Manual Power On Reset (POR). Pull this GPIO pin
      LOW and then HIGH to reset all digital registers to default
    maxItems: 1

  shutdown-gpios:
    description: Corresponds to SDN_IO pin. Shutdown may be
      initiated by the user, by pulsing SDN_IO high. To exit shutdown,
      pulse SDN_IO low, then float.
    maxItems: 1

required:
  - compatible
  - reg
  - clocks
  - hvcc-supply
  - hvee-supply
  - vcc-5v-supply
  - vref-5v-supply
  - dvdd-3p3v-supply
  - avdd-3p3v-supply
  - refio-1p2v-supply

allOf:
  - $ref: /schemas/spi/spi-peripheral-props.yaml#

unevaluatedProperties: false

examples:
  - |
    #include <dt-bindings/gpio/gpio.h>

    spi {
        #address-cells = <1>;
        #size-cells = <0>;

        dac@0 {
            compatible = "adi,ad8460";
            reg = <0>;
            spi-max-frequency = <8000000>;

            dmas = <&tx_dma 0>;
            dma-names = "tx";

            shutdown-reset-gpios = <&gpio 86 GPIO_ACTIVE_HIGH>;
            reset-gpios = <&gpio 91 GPIO_ACTIVE_LOW>;
            shutdown-gpios = <&gpio 88 GPIO_ACTIVE_HIGH>;

            clocks = <&sync_ext_clk>;

            hvcc-supply = <&hvcc>;
            hvee-supply = <&hvee>;
            vcc-5v-supply = <&vcc_5>;
            vref-5v-supply = <&vref_5>;
            dvdd-3p3v-supply = <&dvdd_3_3>;
            avdd-3p3v-supply = <&avdd_3_3>;
            refio-1p2v-supply = <&refio_1_2>;

            adi,external-resistor-ohms = <2000>;
            adi,range-microvolt = <(-40000000) 40000000>;
            adi,range-microamp = <0 50000>;
            adi,max-millicelsius = <50000>;
        };
    };

...