# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/interrupt-controller/st,spear300-shirq.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: SPEAr3xx Shared IRQ controller

maintainers:
  - Viresh Kumar <vireshk@kernel.org>
  - Shiraz Hashim <shiraz.linux.kernel@gmail.com>

description: |
  SPEAr3xx architecture includes shared/multiplexed irqs for certain set of
  devices. The multiplexor provides a single interrupt to parent interrupt
  controller (VIC) on behalf of a group of devices.

  There can be multiple groups available on SPEAr3xx variants but not exceeding
  4. The number of devices in a group can differ, further they may share same
  set of status/mask registers spanning across different bit masks. Also in some
  cases the group may not have enable or other registers. This makes software
  little complex.

  A single node in the device tree is used to describe the shared interrupt
  multiplexer (one node for all groups). A group in the interrupt controller
  shares config/control registers with other groups. For example, a 32-bit
  interrupt enable/disable config register can accommodate up to 4 interrupt
  groups.

properties:
  compatible:
    enum:
      - st,spear300-shirq
      - st,spear310-shirq
      - st,spear320-shirq

  reg:
    maxItems: 1

  '#interrupt-cells':
    const: 1

  interrupt-controller: true

  interrupts:
    description: Interrupt specifier array for SHIRQ groups
    minItems: 1
    maxItems: 4

required:
  - compatible
  - reg
  - '#interrupt-cells'
  - interrupt-controller
  - interrupts

additionalProperties: false

examples:
  - |
    interrupt-controller@b3000000 {
        compatible = "st,spear320-shirq";
        reg = <0xb3000000 0x1000>;
        interrupts = <28 29 30 1>;
        #interrupt-cells = <1>;
        interrupt-controller;
    };