# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/interrupt-controller/thead,c900-aclint-sswi.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: ACLINT Supervisor-level Software Interrupt Device

maintainers:
  - Inochi Amaoto <inochiama@outlook.com>

description:
  The SSWI device is a part of the ACLINT device. It provides
  supervisor-level IPI functionality for a set of HARTs on a supported
  platforms. It provides a register to set an IPI (SETSSIP) for each
  HART connected to the SSWI device. See draft specification
  https://github.com/riscvarchive/riscv-aclint

  Following variants of the SSWI ACLINT supported, using dedicated
  compatible string
  - THEAD C900
  - MIPS P8700

properties:
  compatible:
    oneOf:
      - items:
          - enum:
              - sophgo,sg2044-aclint-sswi
          - const: thead,c900-aclint-sswi
      - items:
          - const: mips,p8700-aclint-sswi

  reg:
    maxItems: 1

  "#interrupt-cells":
    const: 0

  interrupt-controller: true

  interrupts-extended:
    minItems: 1
    maxItems: 4095

  riscv,hart-indexes:
    $ref: /schemas/types.yaml#/definitions/uint32-array
    minItems: 1
    maxItems: 4095
    description:
      A list of hart indexes that APLIC should use to address each hart
      that is mentioned in the "interrupts-extended"

additionalProperties: false

required:
  - compatible
  - reg
  - "#interrupt-cells"
  - interrupt-controller
  - interrupts-extended

allOf:
  - if:
      properties:
        compatible:
          contains:
            const: mips,p8700-aclint-sswi
    then:
      required:
        - riscv,hart-indexes
    else:
      properties:
        riscv,hart-indexes: false

examples:
  - |
    //Example 1
    interrupt-controller@94000000 {
      compatible = "sophgo,sg2044-aclint-sswi", "thead,c900-aclint-sswi";
      reg = <0x94000000 0x00004000>;
      #interrupt-cells = <0>;
      interrupt-controller;
      interrupts-extended = <&cpu1intc 1>,
                            <&cpu2intc 1>,
                            <&cpu3intc 1>,
                            <&cpu4intc 1>;
    };

  - |
    //Example 2
    interrupt-controller@94000000 {
      compatible = "mips,p8700-aclint-sswi";
      reg = <0x94000000 0x00004000>;
      #interrupt-cells = <0>;
      interrupt-controller;
      interrupts-extended = <&cpu1intc 1>,
                            <&cpu2intc 1>,
                            <&cpu3intc 1>,
                            <&cpu4intc 1>;
      riscv,hart-indexes = <0x0 0x1 0x10 0x11>;
    };

...