# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
%YAML 1.2
---
$id: http://devicetree.org/schemas/regulator/vctrl-regulator.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Voltage controlled regulators

maintainers:
  - Heiko Stuebner <heiko@sntech.de>

allOf:
  - $ref: regulator.yaml#

properties:
  compatible:
    const: vctrl-regulator

  ctrl-supply:
    description: Regulator supplying the control voltage

  ctrl-voltage-range:
    description:
      Array of two integer values describing the range (min/max) of the
      control voltage. The values specify the control voltage needed to
      generate the corresponding regulator-min/max-microvolt output
      voltage.
    minItems: 2
    maxItems: 2
    $ref: /schemas/types.yaml#/definitions/uint32-array

  min-slew-down-rate:
    description:
      Describes how slowly the regulator voltage will decay down in the
      worst case (lightest expected load). Specified in uV / us (like
      main regulator ramp rate). This value is required when
      ovp-threshold-percent is specified.
    $ref: /schemas/types.yaml#/definitions/uint32

  ovp-threshold-percent:
    description:
      Overvoltage protection (OVP) threshold of the regulator in percent.
      Some regulators have an OVP circuitry which shuts down the regulator
      when the actual output voltage deviates beyond a certain margin from
      the expected value for a given control voltage. On larger voltage
      decreases this can occur undesiredly since the output voltage does
      not adjust immediately to changes in the control voltage. To avoid
      this situation the vctrl driver breaks down larger voltage decreases
      into multiple steps, where each step is within the OVP threshold.
    minimum: 0
    maximum: 100

unevaluatedProperties: false

dependencies:
  ovp-threshold-percent: [ min-slew-down-rate ]

required:
  - compatible
  - ctrl-supply
  - ctrl-voltage-range
  - regulator-min-microvolt
  - regulator-max-microvolt

examples:
  - |
    vctrl-reg {
            compatible = "vctrl-regulator";
            regulator-name = "vctrl_reg";

            ctrl-supply = <&ctrl_reg>;
            ctrl-voltage-range = <200000 500000>;

            min-slew-down-rate = <225>;
            ovp-threshold-percent = <16>;

            regulator-min-microvolt = <800000>;
            regulator-max-microvolt = <1500000>;
    };
...