# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/spi/fsl,dspi.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: ARM Freescale DSPI controller

maintainers:
  - Frank Li <Frank.Li@nxp.com>

properties:
  compatible:
    oneOf:
      - enum:
          - fsl,vf610-dspi
          - fsl,ls1021a-v1.0-dspi
          - fsl,ls1012a-dspi
          - fsl,ls1028a-dspi
          - fsl,ls1043a-dspi
          - fsl,ls1046a-dspi
          - fsl,ls1088a-dspi
          - fsl,ls2080a-dspi
          - fsl,ls2085a-dspi
          - fsl,lx2160a-dspi
          - nxp,s32g2-dspi
      - items:
          - enum:
              - fsl,ls1012a-dspi
              - fsl,ls1028a-dspi
              - fsl,ls1043a-dspi
              - fsl,ls1046a-dspi
              - fsl,ls1088a-dspi
          - const: fsl,ls1021a-v1.0-dspi
      - items:
          - const: fsl,ls2080a-dspi
          - const: fsl,ls2085a-dspi
      - items:
          - const: fsl,lx2160a-dspi
          - const: fsl,ls2085a-dspi
      - items:
          - const: nxp,s32g3-dspi
          - const: nxp,s32g2-dspi

  reg:
    maxItems: 1

  interrupts:
    maxItems: 1

  clocks:
    maxItems: 1

  clock-names:
    items:
      - const: dspi

  dmas:
    items:
      - description: DMA controller phandle and request line for TX
      - description: DMA controller phandle and request line for RX

  dma-names:
    items:
      - const: tx
      - const: rx

  spi-num-chipselects:
    $ref: /schemas/types.yaml#/definitions/uint32
    description:
      The number of the chip native chipselect signals.
      cs-gpios don't count against this number.

  big-endian: true

  bus-num:
    $ref: /schemas/types.yaml#/definitions/uint32
    description: SoC-specific identifier for the SPI controller.

required:
  - compatible
  - reg
  - clocks
  - clock-names
  - spi-num-chipselects

allOf:
  - $ref: spi-controller.yaml#

unevaluatedProperties: false

examples:
  - |
    #include <dt-bindings/interrupt-controller/arm-gic.h>
    #include <dt-bindings/clock/vf610-clock.h>

    spi@4002c000 {
        compatible = "fsl,vf610-dspi";
        reg = <0x4002c000 0x1000>;
        #address-cells = <1>;
        #size-cells = <0>;
        interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
        clocks = <&clks VF610_CLK_DSPI0>;
        clock-names = "dspi";
        spi-num-chipselects = <5>;
        bus-num = <0>;
        pinctrl-names = "default";
        pinctrl-0 = <&pinctrl_dspi0_1>;
        big-endian;

        flash@0 {
            compatible = "jedec,spi-nor";
            reg = <0>;
            spi-max-frequency = <16000000>;
            spi-cpol;
            spi-cpha;
            spi-cs-setup-delay-ns = <100>;
            spi-cs-hold-delay-ns = <50>;
        };
    };
  # S32G3 in target mode
  - |
    spi@401d4000 {
        compatible = "nxp,s32g3-dspi", "nxp,s32g2-dspi";
        reg = <0x401d4000 0x1000>;
        interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
        clocks = <&clks 26>;
        clock-names = "dspi";
        spi-num-chipselects = <8>;
        bus-num = <0>;
        dmas = <&edma0 0 7>, <&edma0 0 8>;
        dma-names = "tx", "rx";
        spi-slave;
    };