// SPDX-License-Identifier: GPL-2.0
/*
 * Copyright (c) 2018, The Linux Foundation. All rights reserved.
 */

#include <linux/bitfield.h>
#include <linux/clk-provider.h>
#include <linux/cpufreq.h>
#include <linux/init.h>
#include <linux/interconnect.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/pm_opp.h>
#include <linux/slab.h>
#include <linux/spinlock.h>
#include <linux/units.h>

#define LUT_MAX_ENTRIES			40U
#define LUT_SRC				GENMASK(31, 30)
#define LUT_L_VAL			GENMASK(7, 0)
#define LUT_CORE_COUNT			GENMASK(18, 16)
#define LUT_VOLT			GENMASK(11, 0)
#define CLK_HW_DIV			2
#define LUT_TURBO_IND			1

#define GT_IRQ_STATUS			BIT(2)

#define MAX_FREQ_DOMAINS		4

struct qcom_cpufreq_soc_data {
	u32 reg_enable;
	u32 reg_domain_state;
	u32 reg_dcvs_ctrl;
	u32 reg_freq_lut;
	u32 reg_volt_lut;
	u32 reg_intr_clr;
	u32 reg_current_vote;
	u32 reg_perf_state;
	u8 lut_row_size;
};

struct qcom_cpufreq_data {
	void __iomem *base;

	/*
	 * Mutex to synchronize between de-init sequence and re-starting LMh
	 * polling/interrupts
	 */
	struct mutex throttle_lock;
	int throttle_irq;
	char irq_name[15];
	bool cancel_throttle;
	struct delayed_work throttle_work;
	struct cpufreq_policy *policy;
	struct clk_hw cpu_clk;

	bool per_core_dcvs;
};

static struct {
	struct qcom_cpufreq_data *data;
	const struct qcom_cpufreq_soc_data *soc_data;
} qcom_cpufreq;

static unsigned long cpu_hw_rate, xo_rate;
static bool icc_scaling_enabled;

static int qcom_cpufreq_set_bw(struct cpufreq_policy *policy,
			       unsigned long freq_khz)
{
	unsigned long freq_hz = freq_khz * 1000;
	struct dev_pm_opp *opp;
	struct device *dev;
	int ret;

	dev = get_cpu_device(policy->cpu);
	if (!dev)
		return -ENODEV;

	opp = dev_pm_opp_find_freq_exact(dev, freq_hz, true);
	if (IS_ERR(opp))
		return PTR_ERR(opp);

	ret = dev_pm_opp_set_opp(dev, opp);
	dev_pm_opp_put(opp);
	return ret;
}

static int qcom_cpufreq_update_opp(struct device *cpu_dev,
				   unsigned long freq_khz,
				   unsigned long volt)
{
	unsigned long freq_hz = freq_khz * 1000;
	int ret;

	/* Skip voltage update if the opp table is not available */
	if (!icc_scaling_enabled)
		return dev_pm_opp_add(cpu_dev, freq_hz, volt);

	ret = dev_pm_opp_adjust_voltage(cpu_dev, freq_hz, volt, volt, volt);
	if (ret) {
		dev_err(cpu_dev, "Voltage update failed freq=%ld\n", freq_khz);
		return ret;
	}

	return dev_pm_opp_enable(cpu_dev, freq_hz);
}

static int qcom_cpufreq_hw_target_index(struct cpufreq_policy *policy,
					unsigned int index)
{
	struct qcom_cpufreq_data *data = policy->driver_data;
	const struct qcom_cpufreq_soc_data *soc_data = qcom_cpufreq.soc_data;
	unsigned long freq = policy->freq_table[index].frequency;
	unsigned int i;

	writel_relaxed(index, data->base + soc_data->reg_perf_state);

	if (data->per_core_dcvs)
		for (i = 1; i < cpumask_weight(policy->related_cpus); i++)
			writel_relaxed(index, data->base + soc_data->reg_perf_state + i * 4);

	if (icc_scaling_enabled)
		qcom_cpufreq_set_bw(policy, freq);

	return 0;
}

static unsigned long qcom_lmh_get_throttle_freq(struct qcom_cpufreq_data *data)
{
	unsigned int lval;

	if (qcom_cpufreq.soc_data->reg_current_vote)
		lval = readl_relaxed(data->base + qcom_cpufreq.soc_data->reg_current_vote) & 0x3ff;
	else
		lval = readl_relaxed(data->base + qcom_cpufreq.soc_data->reg_domain_state) & 0xff;

	return lval * xo_rate;
}

/* Get the frequency requested by the cpufreq core for the CPU */
static unsigned int qcom_cpufreq_get_freq(struct cpufreq_policy *policy)
{
	struct qcom_cpufreq_data *data;
	const struct qcom_cpufreq_soc_data *soc_data;
	unsigned int index;

	if (!policy)
		return 0;

	data = policy->driver_data;
	soc_data = qcom_cpufreq.soc_data;

	index = readl_relaxed(data->base + soc_data->reg_perf_state);
	index = min(index, LUT_MAX_ENTRIES - 1);

	return policy->freq_table[index].frequency;
}

static unsigned int __qcom_cpufreq_hw_get(struct cpufreq_policy *policy)
{
	struct qcom_cpufreq_data *data;

	if (!policy)
		return 0;

	data = policy->driver_data;

	if (data->throttle_irq >= 0)
		return qcom_lmh_get_throttle_freq(data) / HZ_PER_KHZ;

	return qcom_cpufreq_get_freq(policy);
}

static unsigned int qcom_cpufreq_hw_get(unsigned int cpu)
{
	return __qcom_cpufreq_hw_get(cpufreq_cpu_get_raw(cpu));
}

static unsigned int qcom_cpufreq_hw_fast_switch(struct cpufreq_policy *policy,
						unsigned int target_freq)
{
	struct qcom_cpufreq_data *data = policy->driver_data;
	const struct qcom_cpufreq_soc_data *soc_data = qcom_cpufreq.soc_data;
	unsigned int index;
	unsigned int i;

	index = policy->cached_resolved_idx;
	writel_relaxed(index, data->base + soc_data->reg_perf_state);

	if (data->per_core_dcvs)
		for (i = 1; i < cpumask_weight(policy->related_cpus); i++)
			writel_relaxed(index, data->base + soc_data->reg_perf_state + i * 4);

	return policy->freq_table[index].frequency;
}

static int qcom_cpufreq_hw_read_lut(struct device *cpu_dev,
				    struct cpufreq_policy *policy)
{
	u32 data, src, lval, i, core_count, prev_freq = 0, freq;
	u32 volt;
	struct cpufreq_frequency_table	*table;
	struct dev_pm_opp *opp;
	unsigned long rate;
	int ret;
	struct qcom_cpufreq_data *drv_data = policy->driver_data;
	const struct qcom_cpufreq_soc_data *soc_data = qcom_cpufreq.soc_data;

	table = kcalloc(LUT_MAX_ENTRIES + 1, sizeof(*table), GFP_KERNEL);
	if (!table)
		return -ENOMEM;

	ret = dev_pm_opp_of_add_table(cpu_dev);
	if (!ret) {
		/* Disable all opps and cross-validate against LUT later */
		icc_scaling_enabled = true;
		for (rate = 0; ; rate++) {
			opp = dev_pm_opp_find_freq_ceil(cpu_dev, &rate);
			if (IS_ERR(opp))
				break;

			dev_pm_opp_put(opp);
			dev_pm_opp_disable(cpu_dev, rate);
		}
	} else if (ret != -ENODEV) {
		dev_err(cpu_dev, "Invalid opp table in device tree\n");
		kfree(table);
		return ret;
	} else {
		policy->fast_switch_possible = true;
		icc_scaling_enabled = false;
	}

	for (i = 0; i < LUT_MAX_ENTRIES; i++) {
		data = readl_relaxed(drv_data->base + soc_data->reg_freq_lut +
				      i * soc_data->lut_row_size);
		src = FIELD_GET(LUT_SRC, data);
		lval = FIELD_GET(LUT_L_VAL, data);
		core_count = FIELD_GET(LUT_CORE_COUNT, data);

		data = readl_relaxed(drv_data->base + soc_data->reg_volt_lut +
				      i * soc_data->lut_row_size);
		volt = FIELD_GET(LUT_VOLT, data) * 1000;

		if (src)
			freq = xo_rate * lval / 1000;
		else
			freq = cpu_hw_rate / 1000;

		if (freq != prev_freq && core_count != LUT_TURBO_IND) {
			if (!qcom_cpufreq_update_opp(cpu_dev, freq, volt)) {
				table[i].frequency = freq;
				dev_dbg(cpu_dev, "index=%d freq=%d, core_count %d\n", i,
				freq, core_count);
			} else {
				dev_warn(cpu_dev, "failed to update OPP for freq=%d\n", freq);
				table[i].frequency = CPUFREQ_ENTRY_INVALID;
			}

		} else if (core_count == LUT_TURBO_IND) {
			table[i].frequency = CPUFREQ_ENTRY_INVALID;
		}

		/*
		 * Two of the same frequencies with the same core counts means
		 * end of table
		 */
		if (i > 0 && prev_freq == freq) {
			struct cpufreq_frequency_table *prev = &table[i - 1];

			/*
			 * Only treat the last frequency that might be a boost
			 * as the boost frequency
			 */
			if (prev->frequency == CPUFREQ_ENTRY_INVALID) {
				if (!qcom_cpufreq_update_opp(cpu_dev, prev_freq, volt)) {
					prev->frequency = prev_freq;
					prev->flags = CPUFREQ_BOOST_FREQ;
				} else {
					dev_warn(cpu_dev, "failed to update OPP for freq=%d\n",
						 freq);
				}
			}

			break;
		}

		prev_freq = freq;
	}

	table[i].frequency = CPUFREQ_TABLE_END;
	policy->freq_table = table;
	dev_pm_opp_set_sharing_cpus(cpu_dev, policy->cpus);

	return 0;
}

static void qcom_get_related_cpus(int index, struct cpumask *m)
{
	struct device_node *cpu_np;
	struct of_phandle_args args;
	int cpu, ret;

	for_each_present_cpu(cpu) {
		cpu_np = of_cpu_device_node_get(cpu);
		if (!cpu_np)
			continue;

		ret = of_parse_phandle_with_args(cpu_np, "qcom,freq-domain",
						 "#freq-domain-cells", 0,
						 &args);
		of_node_put(cpu_np);
		if (ret < 0)
			continue;

		if (index == args.args[0])
			cpumask_set_cpu(cpu, m);
	}
}

static void qcom_lmh_dcvs_notify(struct qcom_cpufreq_data *data)
{
	struct cpufreq_policy *policy = data->policy;
	int cpu = cpumask_first(policy->related_cpus);
	struct device *dev = get_cpu_device(cpu);
	unsigned long freq_hz, throttled_freq;
	struct dev_pm_opp *opp;

	/*
	 * Get the h/w throttled frequency, normalize it using the
	 * registered opp table and use it to calculate thermal pressure.
	 */
	freq_hz = qcom_lmh_get_throttle_freq(data);

	opp = dev_pm_opp_find_freq_floor(dev, &freq_hz);
	if (IS_ERR(opp) && PTR_ERR(opp) == -ERANGE)
		opp = dev_pm_opp_find_freq_ceil(dev, &freq_hz);

	if (IS_ERR(opp)) {
		dev_warn(dev, "Can't find the OPP for throttling: %pe!\n", opp);
	} else {
		dev_pm_opp_put(opp);
	}

	throttled_freq = freq_hz / HZ_PER_KHZ;

	/* Update HW pressure (the boost frequencies are accepted) */
	arch_update_hw_pressure(policy->related_cpus, throttled_freq);

	/*
	 * In the unlikely case policy is unregistered do not enable
	 * polling or h/w interrupt
	 */
	mutex_lock(&data->throttle_lock);
	if (data->cancel_throttle)
		goto out;

	/*
	 * If h/w throttled frequency is higher than what cpufreq has requested
	 * for, then stop polling and switch back to interrupt mechanism.
	 */
	if (throttled_freq >= qcom_cpufreq_get_freq(cpufreq_cpu_get_raw(cpu)))
		enable_irq(data->throttle_irq);
	else
		mod_delayed_work(system_highpri_wq, &data->throttle_work,
				 msecs_to_jiffies(10));

out:
	mutex_unlock(&data->throttle_lock);
}

static void qcom_lmh_dcvs_poll(struct work_struct *work)
{
	struct qcom_cpufreq_data *data;

	data = container_of(work, struct qcom_cpufreq_data, throttle_work.work);
	qcom_lmh_dcvs_notify(data);
}

static irqreturn_t qcom_lmh_dcvs_handle_irq(int irq, void *data)
{
	struct qcom_cpufreq_data *c_data = data;

	/* Disable interrupt and enable polling */
	disable_irq_nosync(c_data->throttle_irq);
	schedule_delayed_work(&c_data->throttle_work, 0);

	if (qcom_cpufreq.soc_data->reg_intr_clr)
		writel_relaxed(GT_IRQ_STATUS,
			       c_data->base + qcom_cpufreq.soc_data->reg_intr_clr);

	return IRQ_HANDLED;
}

static const struct qcom_cpufreq_soc_data qcom_soc_data = {
	.reg_enable = 0x0,
	.reg_dcvs_ctrl = 0xbc,
	.reg_freq_lut = 0x110,
	.reg_volt_lut = 0x114,
	.reg_current_vote = 0x704,
	.reg_perf_state = 0x920,
	.lut_row_size = 32,
};

static const struct qcom_cpufreq_soc_data epss_soc_data = {
	.reg_enable = 0x0,
	.reg_domain_state = 0x20,
	.reg_dcvs_ctrl = 0xb0,
	.reg_freq_lut = 0x100,
	.reg_volt_lut = 0x200,
	.reg_intr_clr = 0x308,
	.reg_perf_state = 0x320,
	.lut_row_size = 4,
};

static const struct of_device_id qcom_cpufreq_hw_match[] = {
	{ .compatible = "qcom,cpufreq-hw", .data = &qcom_soc_data },
	{ .compatible = "qcom,cpufreq-epss", .data = &epss_soc_data },
	{}
};
MODULE_DEVICE_TABLE(of, qcom_cpufreq_hw_match);

static int qcom_cpufreq_hw_lmh_init(struct cpufreq_policy *policy, int index)
{
	struct qcom_cpufreq_data *data = policy->driver_data;
	struct platform_device *pdev = cpufreq_get_driver_data();
	int ret;

	/*
	 * Look for LMh interrupt. If no interrupt line is specified /
	 * if there is an error, allow cpufreq to be enabled as usual.
	 */
	data->throttle_irq = platform_get_irq_optional(pdev, index);
	if (data->throttle_irq == -ENXIO)
		return 0;
	if (data->throttle_irq < 0)
		return data->throttle_irq;

	data->cancel_throttle = false;

	mutex_init(&data->throttle_lock);
	INIT_DEFERRABLE_WORK(&data->throttle_work, qcom_lmh_dcvs_poll);

	snprintf(data->irq_name, sizeof(data->irq_name), "dcvsh-irq-%u", policy->cpu);
	ret = request_threaded_irq(data->throttle_irq, NULL, qcom_lmh_dcvs_handle_irq,
				   IRQF_ONESHOT | IRQF_NO_AUTOEN, data->irq_name, data);
	if (ret) {
		dev_err(&pdev->dev, "Error registering %s: %d\n", data->irq_name, ret);
		return 0;
	}

	ret = irq_set_affinity_and_hint(data->throttle_irq, policy->cpus);
	if (ret)
		dev_err(&pdev->dev, "Failed to set CPU affinity of %s[%d]\n",
			data->irq_name, data->throttle_irq);

	return 0;
}

static int qcom_cpufreq_hw_cpu_online(struct cpufreq_policy *policy)
{
	struct qcom_cpufreq_data *data = policy->driver_data;
	struct platform_device *pdev = cpufreq_get_driver_data();
	int ret;

	if (data->throttle_irq <= 0)
		return 0;

	mutex_lock(&data->throttle_lock);
	data->cancel_throttle = false;
	mutex_unlock(&data->throttle_lock);

	ret = irq_set_affinity_and_hint(data->throttle_irq, policy->cpus);
	if (ret)
		dev_err(&pdev->dev, "Failed to set CPU affinity of %s[%d]\n",
			data->irq_name, data->throttle_irq);

	return ret;
}

static int qcom_cpufreq_hw_cpu_offline(struct cpufreq_policy *policy)
{
	struct qcom_cpufreq_data *data = policy->driver_data;

	if (data->throttle_irq <= 0)
		return 0;

	mutex_lock(&data->throttle_lock);
	data->cancel_throttle = true;
	mutex_unlock(&data->throttle_lock);

	cancel_delayed_work_sync(&data->throttle_work);
	irq_set_affinity_and_hint(data->throttle_irq, NULL);
	disable_irq_nosync(data->throttle_irq);

	return 0;
}

static void qcom_cpufreq_hw_lmh_exit(struct qcom_cpufreq_data *data)
{
	if (data->throttle_irq <= 0)
		return;

	free_irq(data->throttle_irq, data);
}

static int qcom_cpufreq_hw_cpu_init(struct cpufreq_policy *policy)
{
	struct platform_device *pdev = cpufreq_get_driver_data();
	struct device *dev = &pdev->dev;
	struct of_phandle_args args;
	struct device_node *cpu_np;
	struct device *cpu_dev;
	struct qcom_cpufreq_data *data;
	int ret, index;

	cpu_dev = get_cpu_device(policy->cpu);
	if (!cpu_dev) {
		pr_err("%s: failed to get cpu%d device\n", __func__,
		       policy->cpu);
		return -ENODEV;
	}

	cpu_np = of_cpu_device_node_get(policy->cpu);
	if (!cpu_np)
		return -EINVAL;

	ret = of_parse_phandle_with_args(cpu_np, "qcom,freq-domain",
					 "#freq-domain-cells", 0, &args);
	of_node_put(cpu_np);
	if (ret)
		return ret;

	index = args.args[0];
	data = &qcom_cpufreq.data[index];

	/* HW should be in enabled state to proceed */
	if (!(readl_relaxed(data->base + qcom_cpufreq.soc_data->reg_enable) & 0x1)) {
		dev_err(dev, "Domain-%d cpufreq hardware not enabled\n", index);
		return -ENODEV;
	}

	if (readl_relaxed(data->base + qcom_cpufreq.soc_data->reg_dcvs_ctrl) & 0x1)
		data->per_core_dcvs = true;

	qcom_get_related_cpus(index, policy->cpus);

	policy->driver_data = data;
	policy->dvfs_possible_from_any_cpu = true;
	data->policy = policy;

	ret = qcom_cpufreq_hw_read_lut(cpu_dev, policy);
	if (ret) {
		dev_err(dev, "Domain-%d failed to read LUT\n", index);
		return ret;
	}

	ret = dev_pm_opp_get_opp_count(cpu_dev);
	if (ret <= 0) {
		dev_err(cpu_dev, "Failed to add OPPs\n");
		return -ENODEV;
	}

	return qcom_cpufreq_hw_lmh_init(policy, index);
}

static void qcom_cpufreq_hw_cpu_exit(struct cpufreq_policy *policy)
{
	struct device *cpu_dev = get_cpu_device(policy->cpu);
	struct qcom_cpufreq_data *data = policy->driver_data;

	dev_pm_opp_remove_all_dynamic(cpu_dev);
	dev_pm_opp_of_cpumask_remove_table(policy->related_cpus);
	qcom_cpufreq_hw_lmh_exit(data);
	kfree(policy->freq_table);
	kfree(data);
}

static void qcom_cpufreq_ready(struct cpufreq_policy *policy)
{
	struct qcom_cpufreq_data *data = policy->driver_data;

	if (data->throttle_irq >= 0)
		enable_irq(data->throttle_irq);
}

static struct cpufreq_driver cpufreq_qcom_hw_driver = {
	.flags		= CPUFREQ_NEED_INITIAL_FREQ_CHECK |
			  CPUFREQ_HAVE_GOVERNOR_PER_POLICY |
			  CPUFREQ_IS_COOLING_DEV,
	.verify		= cpufreq_generic_frequency_table_verify,
	.target_index	= qcom_cpufreq_hw_target_index,
	.get		= qcom_cpufreq_hw_get,
	.init		= qcom_cpufreq_hw_cpu_init,
	.exit		= qcom_cpufreq_hw_cpu_exit,
	.online		= qcom_cpufreq_hw_cpu_online,
	.offline	= qcom_cpufreq_hw_cpu_offline,
	.register_em	= cpufreq_register_em_with_opp,
	.fast_switch    = qcom_cpufreq_hw_fast_switch,
	.name		= "qcom-cpufreq-hw",
	.ready		= qcom_cpufreq_ready,
	.set_boost	= cpufreq_boost_set_sw,
};

static unsigned long qcom_cpufreq_hw_recalc_rate(struct clk_hw *hw, unsigned long parent_rate)
{
	struct qcom_cpufreq_data *data = container_of(hw, struct qcom_cpufreq_data, cpu_clk);

	return __qcom_cpufreq_hw_get(data->policy) * HZ_PER_KHZ;
}

/*
 * Since we cannot determine the closest rate of the target rate, let's just
 * return the actual rate at which the clock is running at. This is needed to
 * make clk_set_rate() API work properly.
 */
static int qcom_cpufreq_hw_determine_rate(struct clk_hw *hw, struct clk_rate_request *req)
{
	req->rate = qcom_cpufreq_hw_recalc_rate(hw, 0);

	return 0;
}

static const struct clk_ops qcom_cpufreq_hw_clk_ops = {
	.recalc_rate = qcom_cpufreq_hw_recalc_rate,
	.determine_rate = qcom_cpufreq_hw_determine_rate,
};

static int qcom_cpufreq_hw_driver_probe(struct platform_device *pdev)
{
	struct clk_hw_onecell_data *clk_data;
	struct device *dev = &pdev->dev;
	struct device *cpu_dev;
	struct clk *clk;
	int ret, i, num_domains;

	clk = clk_get(dev, "xo");
	if (IS_ERR(clk))
		return PTR_ERR(clk);

	xo_rate = clk_get_rate(clk);
	clk_put(clk);

	clk = clk_get(dev, "alternate");
	if (IS_ERR(clk))
		return PTR_ERR(clk);

	cpu_hw_rate = clk_get_rate(clk) / CLK_HW_DIV;
	clk_put(clk);

	cpufreq_qcom_hw_driver.driver_data = pdev;

	/* Check for optional interconnect paths on CPU0 */
	cpu_dev = get_cpu_device(0);
	if (!cpu_dev)
		return -EPROBE_DEFER;

	ret = dev_pm_opp_of_find_icc_paths(cpu_dev, NULL);
	if (ret)
		return dev_err_probe(dev, ret, "Failed to find icc paths\n");

	for (num_domains = 0; num_domains < MAX_FREQ_DOMAINS; num_domains++)
		if (!platform_get_resource(pdev, IORESOURCE_MEM, num_domains))
			break;

	qcom_cpufreq.data = devm_kzalloc(dev, sizeof(struct qcom_cpufreq_data) * num_domains,
					 GFP_KERNEL);
	if (!qcom_cpufreq.data)
		return -ENOMEM;

	qcom_cpufreq.soc_data = of_device_get_match_data(dev);
	if (!qcom_cpufreq.soc_data)
		return -ENODEV;

	clk_data = devm_kzalloc(dev, struct_size(clk_data, hws, num_domains), GFP_KERNEL);
	if (!clk_data)
		return -ENOMEM;

	clk_data->num = num_domains;

	for (i = 0; i < num_domains; i++) {
		struct qcom_cpufreq_data *data = &qcom_cpufreq.data[i];
		struct clk_init_data clk_init = {};
		void __iomem *base;

		base = devm_platform_ioremap_resource(pdev, i);
		if (IS_ERR(base)) {
			dev_err(dev, "Failed to map resource index %d\n", i);
			return PTR_ERR(base);
		}

		data->base = base;

		/* Register CPU clock for each frequency domain */
		clk_init.name = kasprintf(GFP_KERNEL, "qcom_cpufreq%d", i);
		if (!clk_init.name)
			return -ENOMEM;

		clk_init.flags = CLK_GET_RATE_NOCACHE;
		clk_init.ops = &qcom_cpufreq_hw_clk_ops;
		data->cpu_clk.init = &clk_init;

		ret = devm_clk_hw_register(dev, &data->cpu_clk);
		if (ret < 0) {
			dev_err(dev, "Failed to register clock %d: %d\n", i, ret);
			kfree(clk_init.name);
			return ret;
		}

		clk_data->hws[i] = &data->cpu_clk;
		kfree(clk_init.name);
	}

	ret = devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get, clk_data);
	if (ret < 0) {
		dev_err(dev, "Failed to add clock provider\n");
		return ret;
	}

	ret = cpufreq_register_driver(&cpufreq_qcom_hw_driver);
	if (ret)
		dev_err(dev, "CPUFreq HW driver failed to register\n");
	else
		dev_dbg(dev, "QCOM CPUFreq HW driver initialized\n");

	return ret;
}

static void qcom_cpufreq_hw_driver_remove(struct platform_device *pdev)
{
	cpufreq_unregister_driver(&cpufreq_qcom_hw_driver);
}

static struct platform_driver qcom_cpufreq_hw_driver = {
	.probe = qcom_cpufreq_hw_driver_probe,
	.remove = qcom_cpufreq_hw_driver_remove,
	.driver = {
		.name = "qcom-cpufreq-hw",
		.of_match_table = qcom_cpufreq_hw_match,
	},
};

static int __init qcom_cpufreq_hw_init(void)
{
	return platform_driver_register(&qcom_cpufreq_hw_driver);
}
postcore_initcall(qcom_cpufreq_hw_init);

static void __exit qcom_cpufreq_hw_exit(void)
{
	platform_driver_unregister(&qcom_cpufreq_hw_driver);
}
module_exit(qcom_cpufreq_hw_exit);

MODULE_DESCRIPTION("QCOM CPUFREQ HW Driver");
MODULE_LICENSE("GPL v2");