# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/mailbox/microchip,sbi-ipc.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Microchip Inter-processor communication (IPC) mailbox controller

maintainers:
  - Valentina Fernandez <valentina.fernandezalanis@microchip.com>

description:
  The Microchip Inter-processor Communication (IPC) facilitates
  message passing between processors using an interrupt signaling
  mechanism.

properties:
  compatible:
    oneOf:
      - description:
          Intended for use by software running in supervisor privileged
          mode (s-mode). This SBI interface is compatible with the Mi-V
          Inter-hart Communication (IHC) IP.
        const: microchip,sbi-ipc

      - description:
          Intended for use by the SBI implementation in machine mode
          (m-mode), this compatible string is for the MIV_IHC Soft-IP.
        const: microchip,miv-ihc-rtl-v2

  reg:
    maxItems: 1

  interrupts:
    minItems: 1
    maxItems: 5

  interrupt-names:
    minItems: 1
    maxItems: 5
    items:
      enum:
        - hart-0
        - hart-1
        - hart-2
        - hart-3
        - hart-4
        - hart-5

  "#mbox-cells":
    description: >
      For "microchip,sbi-ipc", the cell represents the global "logical"
      channel IDs. The meaning of channel IDs are platform firmware dependent.

      For "microchip,miv-ihc-rtl-v2", the cell represents the physical
      channel and does not vary based on the platform firmware.
    const: 1

  microchip,ihc-chan-disabled-mask:
    description: >
      Represents the enable/disable state of the bi-directional IHC
      channels within the MIV-IHC IP configuration.

      A bit set to '1' indicates that the corresponding channel is disabled,
      and any read or write operations to that channel will return zero.

      A bit set to '0' indicates that the corresponding channel is enabled
      and will be accessible through its dedicated address range registers.

      The actual enable/disable state of each channel is determined by the
      IP block’s configuration.
    $ref: /schemas/types.yaml#/definitions/uint16
    maximum: 0x7fff
    default: 0

required:
  - compatible
  - interrupts
  - interrupt-names
  - "#mbox-cells"

allOf:
  - if:
      properties:
        compatible:
          contains:
            const: microchip,sbi-ipc
    then:
      properties:
        reg:
          not: {}
          description:
            The 'microchip,sbi-ipc' operates in a programming model
            that does not require memory-mapped I/O (MMIO) registers
            since it uses SBI ecalls provided by the m-mode/firmware
            SBI implementation to access hardware registers.
        microchip,ihc-chan-disabled-mask: false
    else:
      required:
        - reg
        - microchip,ihc-chan-disabled-mask

additionalProperties: false

examples:
  - |
    mailbox {
      compatible = "microchip,sbi-ipc";
      interrupt-parent = <&plic>;
      interrupts = <180>, <179>, <178>;
      interrupt-names = "hart-1", "hart-2", "hart-3";
      #mbox-cells = <1>;
    };
  - |
    mailbox@50000000 {
      compatible = "microchip,miv-ihc-rtl-v2";
      microchip,ihc-chan-disabled-mask = /bits/ 16 <0>;
      reg = <0x50000000 0x1c000>;
      interrupt-parent = <&plic>;
      interrupts = <180>, <179>, <178>;
      interrupt-names = "hart-1", "hart-2", "hart-3";
      #mbox-cells = <1>;
    };