===================
Speculation Control
===================

Quite some CPUs have speculation-related misfeatures which are in
fact vulnerabilities causing data leaks in various forms even across
privilege domains.

The kernel provides mitigation for such vulnerabilities in various
forms. Some of these mitigations are compile-time configurable and some
can be supplied on the kernel command line.

There is also a class of mitigations which are very expensive, but they can
be restricted to a certain set of processes or tasks in controlled
environments. The mechanism to control these mitigations is via
:manpage:`prctl(2)`.

There are two prctl options which are related to this:

 * PR_GET_SPECULATION_CTRL

 * PR_SET_SPECULATION_CTRL

PR_GET_SPECULATION_CTRL
-----------------------

PR_GET_SPECULATION_CTRL returns the state of the speculation misfeature
which is selected with arg2 of prctl(2). The return value uses bits 0-3 with
the following meaning (with the caveat that PR_SPEC_L1D_FLUSH has less obvious
semantics, see documentation for that specific control below):

==== ====================== ==================================================
Bit  Define                 Description
==== ====================== ==================================================
0    PR_SPEC_PRCTL          Mitigation can be controlled per task by
                            PR_SET_SPECULATION_CTRL.
1    PR_SPEC_ENABLE         The speculation feature is enabled, mitigation is
                            disabled.
2    PR_SPEC_DISABLE        The speculation feature is disabled, mitigation is
                            enabled.
3    PR_SPEC_FORCE_DISABLE  Same as PR_SPEC_DISABLE, but cannot be undone. A
                            subsequent prctl(..., PR_SPEC_ENABLE) will fail.
4    PR_SPEC_DISABLE_NOEXEC Same as PR_SPEC_DISABLE, but the state will be
                            cleared on :manpage:`execve(2)`.
==== ====================== ==================================================

If all bits are 0 the CPU is not affected by the speculation misfeature.

If PR_SPEC_PRCTL is set, then the per-task control of the mitigation is
available. If not set, prctl(PR_SET_SPECULATION_CTRL) for the speculation
misfeature will fail.

.. _set_spec_ctrl:

PR_SET_SPECULATION_CTRL
-----------------------

PR_SET_SPECULATION_CTRL allows to control the speculation misfeature, which
is selected by arg2 of :manpage:`prctl(2)` per task. arg3 is used to hand
in the control value, i.e. either PR_SPEC_ENABLE or PR_SPEC_DISABLE or
PR_SPEC_FORCE_DISABLE.

Common error codes
------------------
======= =================================================================
Value   Meaning
======= =================================================================
EINVAL  The prctl is not implemented by the architecture or unused
        prctl(2) arguments are not 0.

ENODEV  arg2 is selecting a not supported speculation misfeature.
======= =================================================================

PR_SET_SPECULATION_CTRL error codes
-----------------------------------
======= =================================================================
Value   Meaning
======= =================================================================
0       Success

ERANGE  arg3 is incorrect, i.e. it's neither PR_SPEC_ENABLE nor
        PR_SPEC_DISABLE nor PR_SPEC_FORCE_DISABLE.

ENXIO   Control of the selected speculation misfeature is not possible.
        See PR_GET_SPECULATION_CTRL.

EPERM   Speculation was disabled with PR_SPEC_FORCE_DISABLE and caller
        tried to enable it again.
======= =================================================================

Speculation misfeature controls
-------------------------------
- PR_SPEC_STORE_BYPASS: Speculative Store Bypass

  Invocations:
   * prctl(PR_GET_SPECULATION_CTRL, PR_SPEC_STORE_BYPASS, 0, 0, 0);
   * prctl(PR_SET_SPECULATION_CTRL, PR_SPEC_STORE_BYPASS, PR_SPEC_ENABLE, 0, 0);
   * prctl(PR_SET_SPECULATION_CTRL, PR_SPEC_STORE_BYPASS, PR_SPEC_DISABLE, 0, 0);
   * prctl(PR_SET_SPECULATION_CTRL, PR_SPEC_STORE_BYPASS, PR_SPEC_FORCE_DISABLE, 0, 0);
   * prctl(PR_SET_SPECULATION_CTRL, PR_SPEC_STORE_BYPASS, PR_SPEC_DISABLE_NOEXEC, 0, 0);

- PR_SPEC_INDIR_BRANCH: Indirect Branch Speculation in User Processes
                        (Mitigate Spectre V2 style attacks against user processes)

  Invocations:
   * prctl(PR_GET_SPECULATION_CTRL, PR_SPEC_INDIRECT_BRANCH, 0, 0, 0);
   * prctl(PR_SET_SPECULATION_CTRL, PR_SPEC_INDIRECT_BRANCH, PR_SPEC_ENABLE, 0, 0);
   * prctl(PR_SET_SPECULATION_CTRL, PR_SPEC_INDIRECT_BRANCH, PR_SPEC_DISABLE, 0, 0);
   * prctl(PR_SET_SPECULATION_CTRL, PR_SPEC_INDIRECT_BRANCH, PR_SPEC_FORCE_DISABLE, 0, 0);

- PR_SPEC_L1D_FLUSH: Flush L1D Cache on context switch out of the task
                        (works only when tasks run on non SMT cores)

For this control, PR_SPEC_ENABLE means that the **mitigation** is enabled (L1D
is flushed), PR_SPEC_DISABLE means it is disabled.

  Invocations:
   * prctl(PR_GET_SPECULATION_CTRL, PR_SPEC_L1D_FLUSH, 0, 0, 0);
   * prctl(PR_SET_SPECULATION_CTRL, PR_SPEC_L1D_FLUSH, PR_SPEC_ENABLE, 0, 0);
   * prctl(PR_SET_SPECULATION_CTRL, PR_SPEC_L1D_FLUSH, PR_SPEC_DISABLE, 0, 0);