// SPDX-License-Identifier: (GPL-2.0+ OR MIT)

/dts-v1/;

#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/pwm/pwm.h>
#include <dt-bindings/pinctrl/rockchip.h>
#include <dt-bindings/soc/rockchip,vop2.h>
#include <dt-bindings/leds/common.h>
#include "rk3566.dtsi"

/ {
	aliases {
		ethernet0 = &gmac1;
		mmc0 = &sdhci;
		mmc1 = &sdmmc0;
	};

	chosen: chosen {
		stdout-path = "serial2:1500000n8";
	};

	ext_cam_clk: clock-25000000-cam {
		compatible = "fixed-clock";
		clock-frequency = <25000000>;
		clock-output-names = "ext_cam_clk";
		#clock-cells = <0>;
	};

	can_mcp2515_osc: clock-8000000-mcp2515 {
		compatible = "fixed-clock";
		clock-frequency = <8000000>;
		#clock-cells = <0>;
	};

	hdmi-con {
		compatible = "hdmi-connector";
		type = "a";

		port {
			hdmi_con_in: endpoint {
				remote-endpoint = <&hdmi_out_con>;
			};
		};
	};

	leds: leds {
		compatible = "gpio-leds";

		led-0 {
			color = <LED_COLOR_ID_BLUE>;
			function = LED_FUNCTION_POWER;
			gpios = <&gpio4 RK_PA1 GPIO_ACTIVE_LOW>;
			linux,default-trigger = "default-on";
			pinctrl-names = "default";
			pinctrl-0 = <&blue_led>;
		};

		led-1 {
			color = <LED_COLOR_ID_GREEN>;
			function = LED_FUNCTION_HEARTBEAT;
			gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_LOW>;
			linux,default-trigger = "heartbeat";
			pinctrl-names = "default";
			pinctrl-0 = <&heartbeat_led>;
		};
	};

	fan: pwm-fan {
		compatible = "pwm-fan";
		#cooling-cells = <2>;
		cooling-levels = <0 50 100 150 200 255>;
		pwms = <&pwm7 0 50000 0>;
	};

	rk809-sound {
		compatible = "simple-audio-card";
		simple-audio-card,format = "i2s";
		simple-audio-card,name = "Analog RK809";
		simple-audio-card,mclk-fs = <256>;

		simple-audio-card,cpu {
			sound-dai = <&i2s1_8ch>;
		};

		simple-audio-card,codec {
			sound-dai = <&rk809>;
		};
	};

	sdio_pwrseq: sdio-pwrseq {
		compatible = "mmc-pwrseq-simple";
		clocks = <&rk809 1>;
		clock-names = "ext_clock";
		pinctrl-names = "default";
		pinctrl-0 = <&wifi_enable_h>;
		post-power-on-delay-ms = <200>;
		reset-gpios = <&gpio0 RK_PD3 GPIO_ACTIVE_LOW>;
	};

	vbus: regulator-vbus {
		compatible = "regulator-fixed";
		regulator-name = "vbus";
		regulator-always-on;
		regulator-boot-on;
		regulator-min-microvolt = <5000000>;
		regulator-max-microvolt = <5000000>;
	};

	vcc12v_dcin: regulator-vcc12v-dcin {
		compatible = "regulator-fixed";
		regulator-name = "vcc12v_dcin";
		regulator-always-on;
		regulator-boot-on;
		regulator-min-microvolt = <12000000>;
		regulator-max-microvolt = <12000000>;
	};

	vcc3v3_pcie: regulator-vcc3v3-pcie {
		compatible = "regulator-fixed";
		regulator-name = "vcc3v3_pcie";
		enable-active-high;
		gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;
		pinctrl-names = "default";
		pinctrl-0 = <&pcie_drv>;
		regulator-always-on;
		regulator-boot-on;
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
		vin-supply = <&vcc12v_dcin>;
	};

	vcc3v3_sys: regulator-vcc3v3-sys {
		compatible = "regulator-fixed";
		regulator-name = "vcc3v3_sys";
		regulator-always-on;
		regulator-boot-on;
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
		vin-supply = <&vbus>;
	};

	vcc5v0_host: regulator-vcc5v0-host {
		compatible = "regulator-fixed";
		enable-active-high;
		gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>;
		pinctrl-names = "default";
		pinctrl-0 = <&vcc5v0_host_en>;
		regulator-name = "vcc5v0_host3";
		regulator-always-on;
		regulator-min-microvolt = <5000000>;
		regulator-max-microvolt = <5000000>;
	};

	vcc5v0_otg: regulator-vcc5v0-otg {
		compatible = "regulator-fixed";
		enable-active-high;
		gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>;
		pinctrl-names = "default";
		pinctrl-0 = <&vcc5v0_otg_en>;
		regulator-name = "vcc5v0_otg3";
		regulator-always-on;
		regulator-min-microvolt = <5000000>;
		regulator-max-microvolt = <5000000>;
	};

	vcc5v0_sys: regulator-vcc5v0-sys {
		compatible = "regulator-fixed";
		regulator-name = "vcc5v0_sys";
		regulator-always-on;
		regulator-boot-on;
		regulator-min-microvolt = <5000000>;
		regulator-max-microvolt = <5000000>;
		vin-supply = <&vbus>;
	};

	vcc5v0_usb: regulator-vcc5v0-usb {
		compatible = "regulator-fixed";
		regulator-name = "vcc5v0_usb";
		regulator-always-on;
		regulator-boot-on;
		regulator-min-microvolt = <5000000>;
		regulator-max-microvolt = <5000000>;
		vin-supply = <&vbus>;
	};

	vcc5v0_usb2b: regulator-vcc5v0-usb2b {
		compatible = "regulator-fixed";
		enable-active-high;
		gpio = <&gpio0 RK_PC4 GPIO_ACTIVE_HIGH>;
		pinctrl-names = "default";
		pinctrl-0 = <&vcc5v0_usb2b_en>;
		regulator-name = "vcc5v0_usb2b";
		regulator-always-on;
		regulator-min-microvolt = <5000000>;
		regulator-max-microvolt = <5000000>;
	};

	vcc5v0_usb2t: regulator-vcc5v0-usb2t {
		compatible = "regulator-fixed";
		enable-active-high;
		gpios = <&gpio0 RK_PD5 GPIO_ACTIVE_HIGH>;
		pinctrl-names = "default";
		pinctrl-0 = <&vcc5v0_usb2t_en>;
		regulator-name = "vcc5v0_usb2t";
		regulator-always-on;
		regulator-min-microvolt = <5000000>;
		regulator-max-microvolt = <5000000>;
	};

	vcc_5v: regulator-vcc-5v {
		compatible = "regulator-fixed";
		regulator-name = "vcc_5v";
		regulator-always-on;
		regulator-boot-on;
		regulator-min-microvolt = <5000000>;
		regulator-max-microvolt = <5000000>;
		vin-supply = <&vcc12v_dcin>;
	};

	vcc_sd: regulator-vcc-sd {
		compatible = "regulator-fixed";
		regulator-max-microvolt = <3300000>;
		regulator-min-microvolt = <3300000>;
		regulator-name = "vcc_sd";
		vin-supply = <&vcc3v3_sys>;
	};
};

&combphy1 {
	status = "okay";
};

&combphy2 {
	status = "okay";
};

&cpu0 {
	cpu-supply = <&vdd_cpu>;
};

&cpu1 {
	cpu-supply = <&vdd_cpu>;
};

&cpu2 {
	cpu-supply = <&vdd_cpu>;
};

&cpu3 {
	cpu-supply = <&vdd_cpu>;
};

&gmac1 {
	assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>;
	assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru CLK_MAC1_2TOP>;
	assigned-clock-rates = <0>, <125000000>;
	clock_in_out = "input";
	phy-handle = <&rgmii_phy0>;
	phy-mode = "rgmii-id";
	pinctrl-names = "default";
	pinctrl-0 = <&gmac1m0_miim
			&gmac1m0_tx_bus2
			&gmac1m0_rx_bus2
			&gmac1m0_rgmii_clk
			&gmac1m0_clkinout
			&gmac1m0_rgmii_bus>;
	status = "okay";
};

&mdio1 {
	rgmii_phy0: phy@0 {
		compatible = "ethernet-phy-ieee802.3-c22";
		reset-delay-us = <20000>;
		reset-gpios = <&gpio0 RK_PC5 GPIO_ACTIVE_LOW>;
		reset-post-delay-us = <100000>;
		reg = <0x0>;
	};
};

&gpu {
	mali-supply = <&vdd_gpu>;
	status = "okay";
};

&hdmi {
	avdd-0v9-supply = <&vdda0v9_image>;
	avdd-1v8-supply = <&vcca1v8_image>;
	status = "okay";
};

&hdmi_in {
	hdmi_in_vp0: endpoint {
		remote-endpoint = <&vp0_out_hdmi>;
	};
};

&hdmi_out {
	hdmi_out_con: endpoint {
		remote-endpoint = <&hdmi_con_in>;
	};
};

&hdmi_sound {
	status = "okay";
};

&i2c0 {
	status = "okay";

	vdd_cpu: regulator@1c {
		compatible = "tcs,tcs4525";
		reg = <0x1c>;
		regulator-name = "vdd_cpu";
		regulator-min-microvolt = <712500>;
		regulator-max-microvolt = <1390000>;
		regulator-initial-mode = <1>;
		regulator-ramp-delay = <2300>;
		regulator-boot-on;
		regulator-always-on;
		vin-supply = <&vcc5v0_sys>;
		fcs,suspend-voltage-selector = <1>;

		regulator-state-mem {
			regulator-off-in-suspend;
		};
	};

	rk809: pmic@20 {
		compatible = "rockchip,rk809";
		reg = <0x20>;
		interrupt-parent = <&gpio0>;
		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
		assigned-clocks = <&cru I2S1_MCLKOUT_TX>;
		assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>;
		#clock-cells = <1>;
		clock-names = "mclk";
		clocks = <&cru I2S1_MCLKOUT_TX>;
		pinctrl-names = "default", "pmic-sleep",
				"pmic-power-off", "pmic-reset";
		pinctrl-0 = <&pmic_int>, <&i2s1m0_mclk>;
		#sound-dai-cells = <0>;
		system-power-controller;
		wakeup-source;

		vcc1-supply = <&vcc3v3_sys>;
		vcc2-supply = <&vcc3v3_sys>;
		vcc3-supply = <&vcc3v3_sys>;
		vcc4-supply = <&vcc3v3_sys>;
		vcc5-supply = <&vcc3v3_sys>;
		vcc6-supply = <&vcc3v3_sys>;
		vcc7-supply = <&vcc3v3_sys>;
		vcc8-supply = <&vcc3v3_sys>;
		vcc9-supply = <&vcc3v3_sys>;

		regulators {
			vdd_logic: DCDC_REG1 {
				regulator-always-on;
				regulator-boot-on;
				regulator-min-microvolt = <500000>;
				regulator-max-microvolt = <1350000>;
				regulator-ramp-delay = <6001>;
				regulator-initial-mode = <0x2>;
				regulator-name = "vdd_logic";

				regulator-state-mem {
					regulator-off-in-suspend;
				};
			};

			vdd_gpu: DCDC_REG2 {
				regulator-always-on;
				regulator-boot-on;
				regulator-min-microvolt = <500000>;
				regulator-max-microvolt = <1350000>;
				regulator-ramp-delay = <6001>;
				regulator-initial-mode = <0x2>;
				regulator-name = "vdd_gpu";

				regulator-state-mem {
					regulator-off-in-suspend;
				};
			};

			vcc_ddr: DCDC_REG3 {
				regulator-always-on;
				regulator-boot-on;
				regulator-initial-mode = <0x2>;
				regulator-name = "vcc_ddr";

				regulator-state-mem {
					regulator-on-in-suspend;
				};
			};

			vdd_npu: DCDC_REG4 {
				regulator-always-on;
				regulator-boot-on;
				regulator-min-microvolt = <500000>;
				regulator-max-microvolt = <1350000>;
				regulator-ramp-delay = <6001>;
				regulator-initial-mode = <0x2>;
				regulator-name = "vdd_npu";

				regulator-state-mem {
					regulator-off-in-suspend;
				};
			};

			vdda0v9_image: LDO_REG1 {
				regulator-boot-on;
				regulator-always-on;
				regulator-min-microvolt = <900000>;
				regulator-max-microvolt = <900000>;
				regulator-name = "vdda0v9_image";

				regulator-state-mem {
					regulator-off-in-suspend;
				};
			};

			vdda_0v9: LDO_REG2 {
				regulator-always-on;
				regulator-boot-on;
				regulator-min-microvolt = <900000>;
				regulator-max-microvolt = <900000>;
				regulator-name = "vdda_0v9";

				regulator-state-mem {
					regulator-off-in-suspend;
				};
			};

			vdda0v9_pmu: LDO_REG3 {
				regulator-always-on;
				regulator-boot-on;
				regulator-min-microvolt = <900000>;
				regulator-max-microvolt = <900000>;
				regulator-name = "vdda0v9_pmu";

				regulator-state-mem {
					regulator-on-in-suspend;
					regulator-suspend-microvolt = <900000>;
				};
			};

			vccio_acodec: LDO_REG4 {
				regulator-always-on;
				regulator-boot-on;
				regulator-min-microvolt = <3000000>;
				regulator-max-microvolt = <3000000>;
				regulator-name = "vccio_acodec";

				regulator-state-mem {
					regulator-off-in-suspend;
				};
			};

			vccio_sd: LDO_REG5 {
				regulator-always-on;
				regulator-boot-on;
				regulator-min-microvolt = <1800000>;
				regulator-max-microvolt = <3300000>;
				regulator-name = "vccio_sd";

				regulator-state-mem {
					regulator-off-in-suspend;
				};
			};

			vcc3v3_pmu: LDO_REG6 {
				regulator-always-on;
				regulator-boot-on;
				regulator-min-microvolt = <3300000>;
				regulator-max-microvolt = <3300000>;
				regulator-name = "vcc3v3_pmu";

				regulator-state-mem {
					regulator-on-in-suspend;
					regulator-suspend-microvolt = <3300000>;
				};
			};

			vcca_1v8: LDO_REG7 {
				regulator-always-on;
				regulator-boot-on;
				regulator-min-microvolt = <1800000>;
				regulator-max-microvolt = <1800000>;
				regulator-name = "vcca_1v8";

				regulator-state-mem {
					regulator-off-in-suspend;
				};
			};

			vcca1v8_pmu: LDO_REG8 {
				regulator-always-on;
				regulator-boot-on;
				regulator-min-microvolt = <1800000>;
				regulator-max-microvolt = <1800000>;
				regulator-name = "vcca1v8_pmu";

				regulator-state-mem {
					regulator-on-in-suspend;
					regulator-suspend-microvolt = <1800000>;
				};
			};

			vcca1v8_image: LDO_REG9 {
				regulator-always-on;
				regulator-boot-on;
				regulator-min-microvolt = <1800000>;
				regulator-max-microvolt = <1800000>;
				regulator-name = "vcca1v8_image";

				regulator-state-mem {
					regulator-off-in-suspend;
				};
			};

			vcc_1v8: DCDC_REG5 {
				regulator-always-on;
				regulator-boot-on;
				regulator-min-microvolt = <1800000>;
				regulator-max-microvolt = <1800000>;
				regulator-name = "vcc_1v8";

				regulator-state-mem {
					regulator-off-in-suspend;
				};
			};

			vcc_3v3: SWITCH_REG1 {
				regulator-always-on;
				regulator-boot-on;
				regulator-name = "vcc_3v3";

				regulator-state-mem {
					regulator-off-in-suspend;
				};
			};

			vcc3v3_sd: SWITCH_REG2 {
				regulator-always-on;
				regulator-boot-on;
				regulator-name = "vcc3v3_sd";

				regulator-state-mem {
					regulator-off-in-suspend;
				};
			};
		};

		codec {
			rockchip,mic-in-differential;
		};
	};
};

&i2c2 {
	pinctrl-0 = <&i2c2m1_xfer>;
};

&i2c3 {
	status = "okay";

	tft_tp: touchscreen@48 {
		compatible = "ti,tsc2007";
		reg = <0x48>;
		status = "okay";
		ti,x-plate-ohms = <660>;
		ti,rt-thr = <3000>;
		ti,fuzzx = <32>;
		ti,fuzzy = <16>;
	};
};

&i2s0_8ch {
	status = "okay";
};

&i2s1_8ch {
	pinctrl-names = "default";
	pinctrl-0 = <&i2s1m0_sclktx &i2s1m0_lrcktx &i2s1m0_sdi0 &i2s1m0_sdo0>;
	rockchip,trcm-sync-tx-only;
	status = "okay";
};

&spi1 {
	pinctrl-names = "default";
	pinctrl-0 = <&spi1m1_cs0 &spi1m1_pins>;

	can_mcp2515: can@0 {
		compatible = "microchip,mcp2515";
		reg = <0x00>;
		clocks = <&can_mcp2515_osc>;
		interrupt-parent = <&gpio4>;
		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
		pinctrl-names = "default";
		pinctrl-0 = <&mcp2515_int_pin>;
		spi-max-frequency = <10000000>;
		vdd-supply = <&vcc3v3_sys>;
		xceiver-supply = <&vcc3v3_sys>;
	};
};

&spi3 {
	pinctrl-names = "default";
	pinctrl-0 = <&spi3m1_cs0 &spi3m1_pins>;
};

&pcie2x1 {
	pinctrl-names = "default";
	pinctrl-0 = <&pcie_reset_h>;
	reset-gpios = <&gpio1 RK_PB2 GPIO_ACTIVE_HIGH>;
	vpcie3v3-supply = <&vcc3v3_pcie>;
	status = "okay";
};

&pinctrl {
	bt {
		bt_enable: bt-enable-h {
			rockchip,pins = <2 RK_PB7 RK_FUNC_GPIO &pcfg_pull_down>;
		};

		bt_host_wake: bt-host-wake-l {
			rockchip,pins = <2 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
		};

		bt_wake: bt-wake-l {
			rockchip,pins = <2 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>;
		};
	};

	pcie {
		pcie_drv: pcie-drv {
			rockchip,pins = <4 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
		};

		pcie_reset_h: pcie-reset-h {
			rockchip,pins = <1 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
		};
	};

	pmic {
		pmic_int: pmic-int {
			rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
		};
	};

	sdio-pwrseq {
		wifi_enable_h: wifi-enable-h {
			rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
		};

		wifi_host_wake: wifi-host-wake-l {
			rockchip,pins = <2 RK_PB1 RK_FUNC_GPIO &pcfg_pull_down>;
		};
	};

	usb {
		vcc5v0_host_en: vcc5v0-host-en {
			rockchip,pins = <0 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
		};

		vcc5v0_otg_en: vcc5v0-otg-en {
			rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
		};

		vcc5v0_usb2t_en: vcc5v0-usb2t-en {
			rockchip,pins = <3 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
		};

		vcc5v0_usb2b_en: vcc5v0-usb2b-en {
			rockchip,pins = <4 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>;
		};
	};

	work-led {
		heartbeat_led: led-heartbeat {
			rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
		};

		blue_led: led-blue {
			rockchip,pins = <4 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
		};
	};

	mcp2515 {
		mcp2515_int_pin: mcp2515-int-pin {
			rockchip,pins = <4 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
		};
	};
};

&pmu_io_domains {
	pmuio1-supply = <&vcc3v3_pmu>;
	pmuio2-supply = <&vcc3v3_pmu>;
	vccio1-supply = <&vcc_3v3>;
	vccio2-supply = <&vcc_1v8>;
	vccio3-supply = <&vccio_sd>;
	vccio4-supply = <&vcc_1v8>;
	vccio5-supply = <&vcc_3v3>;
	vccio6-supply = <&vcc_3v3>;
	vccio7-supply = <&vcc_3v3>;
	status = "okay";
};

&pwm0 {
	pinctrl-names = "default";
	pinctrl-0 = <&pwm0m1_pins>;
};

&pwm12 {
	pinctrl-names = "default";
	pinctrl-0 = <&pwm12m1_pins>;
};

&pwm13 {
	pinctrl-names = "default";
	pinctrl-0 = <&pwm13m1_pins>;
};

&pwm14 {
	pinctrl-names = "default";
	pinctrl-0 = <&pwm14m1_pins>;
};

&pwm15 {
	pinctrl-names = "default";
	pinctrl-0 = <&pwm15m1_pins>;
};

&saradc {
	vref-supply = <&vcca_1v8>;
	status = "okay";
};

&sdhci {
	bus-width = <8>;
	max-frequency = <200000000>;
	non-removable;
	pinctrl-names = "default";
	pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd>;
	status = "okay";
};

&sdmmc0 {
	max-frequency = <150000000>;
	bus-width = <4>;
	cap-mmc-highspeed;
	cap-sd-highspeed;
	disable-wp;
	pinctrl-names = "default";
	pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
	vmmc-supply = <&vcc_sd>;
	vqmmc-supply = <&vccio_sd>;
	status = "okay";
};

&sdmmc1 {
	/* WiFi & BT combo module AMPAK AP6256 */
	#address-cells = <1>;
	#size-cells = <0>;
	bus-width = <4>;
	cap-sd-highspeed;
	cap-sdio-irq;
	disable-wp;
	keep-power-in-suspend;
	max-frequency = <150000000>;
	mmc-pwrseq = <&sdio_pwrseq>;
	non-removable;
	pinctrl-names = "default";
	pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk>;
	rockchip,default-sample-phase = <90>;
	status = "okay";

	wifi@1 {
		compatible = "brcm,bcm4329-fmac";
		reg = <1>;
		interrupt-parent = <&gpio2>;
		interrupts = <9 IRQ_TYPE_LEVEL_HIGH>;
		interrupt-names = "host-wake";
		pinctrl-names = "default";
		pinctrl-0 = <&wifi_host_wake>;
		brcm,drive-strength = <10>;
	};
};

&sfc {
	#address-cells = <1>;
	#size-cells = <0>;
	status = "okay";
};

&tsadc {
	status = "okay";
};

&uart1 {
	dma-names = "tx","rx";
	pinctrl-names = "default";
	pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn &uart1m0_rtsn>;
	uart-has-rtscts;
	status = "okay";

	bluetooth {
		compatible = "brcm,bcm4345c5";
		clocks = <&rk809 1>;
		clock-names = "lpo";
		device-wakeup-gpios = <&gpio2 RK_PC0 GPIO_ACTIVE_HIGH>;
		host-wakeup-gpios = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>;
		shutdown-gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>;
		pinctrl-names = "default";
		pinctrl-0 = <&bt_host_wake &bt_wake &bt_enable>;
		vbat-supply = <&vcc3v3_sys>;
		vddio-supply = <&vcca1v8_pmu>;
	};
};

&uart2 {
	status = "okay";
};

&uart5 {
	pinctrl-names = "default";
	pinctrl-0 = <&uart5m1_xfer>;
};

&uart7 {
	pinctrl-names = "default";
	pinctrl-0 = <&uart7m2_xfer>;
};

&usb2phy0 {
	status = "okay";
};

&usb2phy0_host {
	phy-supply = <&vcc5v0_host>;
	status = "okay";
};

&usb2phy0_otg {
	phy-supply = <&vcc5v0_otg>;
	status = "okay";
};

&usb2phy1 {
	status = "okay";
};

&usb2phy1_host {
	phy-supply = <&vcc5v0_usb2t>;
	status = "okay";
};

&usb2phy1_otg {
	phy-supply = <&vcc5v0_usb2b>;
	status = "okay";
};

&usb_host0_ehci {
	status = "okay";
};

&usb_host0_ohci {
	status = "okay";
};

&usb_host0_xhci {
	dr_mode = "host";
	extcon = <&usb2phy0>;
	status = "okay";
};

&usb_host1_ehci {
	status = "okay";
};

&usb_host1_ohci {
	status = "okay";
};

&usb_host1_xhci {
	status = "okay";
};

&vop {
	assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
	assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
	status = "okay";
};

&vop_mmu {
	status = "okay";
};

&vp0 {
	vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
		reg = <ROCKCHIP_VOP2_EP_HDMI0>;
		remote-endpoint = <&hdmi_in_vp0>;
	};
};