# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/display/mediatek/mediatek,split.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Mediatek display split

maintainers:
  - Chun-Kuang Hu <chunkuang.hu@kernel.org>
  - Philipp Zabel <p.zabel@pengutronix.de>

description: |
  Mediatek display split, namely SPLIT, is used to split stream to two
  encoders.
  SPLIT device node must be siblings to the central MMSYS_CONFIG node.
  For a description of the MMSYS_CONFIG binding, see
  Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml
  for details.

properties:
  compatible:
    oneOf:
      - enum:
          - mediatek,mt8173-disp-split
          - mediatek,mt8195-mdp3-split
      - items:
          - const: mediatek,mt6795-disp-split
          - const: mediatek,mt8173-disp-split

  reg:
    maxItems: 1

  interrupts:
    maxItems: 1

  power-domains:
    description: A phandle and PM domain specifier as defined by bindings of
      the power controller specified by phandle. See
      Documentation/devicetree/bindings/power/power-domain.yaml for details.
    maxItems: 1

  mediatek,gce-client-reg:
    description:
      The register of display function block to be set by gce. There are 4 arguments,
      such as gce node, subsys id, offset and register size. The subsys id that is
      mapping to the register of display function blocks is defined in the gce header
      include/dt-bindings/gce/<chip>-gce.h of each chips.
    $ref: /schemas/types.yaml#/definitions/phandle-array
    items:
      items:
        - description: phandle of GCE
        - description: GCE subsys id
        - description: register offset
        - description: register size
    maxItems: 1

  clocks:
    items:
      - description: SPLIT Clock
      - description: Used for interfacing with the HDMI RX signal source.
      - description: Paired with receiving HDMI RX metadata.
    minItems: 1

required:
  - compatible
  - reg
  - power-domains
  - clocks

allOf:
  - if:
      properties:
        compatible:
          contains:
            const: mediatek,mt8195-mdp3-split

    then:
      properties:
        clocks:
          minItems: 3

      required:
        - mediatek,gce-client-reg

  - if:
      properties:
        compatible:
          contains:
            const: mediatek,mt8173-disp-split

    then:
      properties:
        clocks:
          maxItems: 1

additionalProperties: false

examples:
  - |
    #include <dt-bindings/clock/mt8173-clk.h>
    #include <dt-bindings/power/mt8173-power.h>

    soc {
        #address-cells = <2>;
        #size-cells = <2>;

        split0: split@14018000 {
            compatible = "mediatek,mt8173-disp-split";
            reg = <0 0x14018000 0 0x1000>;
            power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
            clocks = <&mmsys CLK_MM_DISP_SPLIT0>;
        };
    };