# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/power/mediatek,power-controller.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Mediatek Power Domains Controller

maintainers:
  - MandyJH Liu <mandyjh.liu@mediatek.com>
  - Matthias Brugger <mbrugger@suse.com>

description: |
  Mediatek processors include support for multiple power domains which can be
  powered up/down by software based on different application scenes to save power.

  IP cores belonging to a power domain should contain a 'power-domains'
  property that is a phandle for SCPSYS node representing the domain.

properties:
  $nodename:
    pattern: '^power-controller(@[0-9a-f]+)?$'

  compatible:
    enum:
      - mediatek,mt6735-power-controller
      - mediatek,mt6795-power-controller
      - mediatek,mt6893-power-controller
      - mediatek,mt8167-power-controller
      - mediatek,mt8173-power-controller
      - mediatek,mt8183-power-controller
      - mediatek,mt8186-power-controller
      - mediatek,mt8188-power-controller
      - mediatek,mt8192-power-controller
      - mediatek,mt8195-power-controller
      - mediatek,mt8365-power-controller

  '#power-domain-cells':
    const: 1

  '#address-cells':
    const: 1

  '#size-cells':
    const: 0

  access-controllers:
    description:
      A number of phandles to external blocks to set and clear the required
      bits to enable or disable bus protection, necessary to avoid any bus
      faults while enabling or disabling a power domain.
      For example, this may hold phandles to INFRACFG and SMI.
    minItems: 1
    maxItems: 3

patternProperties:
  "^power-domain@[0-9a-f]+$":
    $ref: "#/$defs/power-domain-node"
    patternProperties:
      "^power-domain@[0-9a-f]+$":
        $ref: "#/$defs/power-domain-node"
        patternProperties:
          "^power-domain@[0-9a-f]+$":
            $ref: "#/$defs/power-domain-node"
            patternProperties:
              "^power-domain@[0-9a-f]+$":
                $ref: "#/$defs/power-domain-node"
                patternProperties:
                  "^power-domain@[0-9a-f]+$":
                    $ref: "#/$defs/power-domain-node"
                    unevaluatedProperties: false
                unevaluatedProperties: false
            unevaluatedProperties: false
        unevaluatedProperties: false
    unevaluatedProperties: false

$defs:
  power-domain-node:
    type: object
    description: |
      Represents the power domains within the power controller node as documented
      in Documentation/devicetree/bindings/power/power-domain.yaml.

    properties:

      '#power-domain-cells':
        description:
          Must be 0 for nodes representing a single PM domain and 1 for nodes
          providing multiple PM domains.

      '#address-cells':
        const: 1

      '#size-cells':
        const: 0

      reg:
        description: |
          Power domain index. Valid values are defined in:
              "include/dt-bindings/power/mt6795-power.h" - for MT8167 type power domain.
              "include/dt-bindings/power/mediatek,mt6893-power.h" - for MT6893 type power domain.
              "include/dt-bindings/power/mt8167-power.h" - for MT8167 type power domain.
              "include/dt-bindings/power/mt8173-power.h" - for MT8173 type power domain.
              "include/dt-bindings/power/mt8183-power.h" - for MT8183 type power domain.
              "include/dt-bindings/power/mediatek,mt8188-power.h" - for MT8188 type power domain.
              "include/dt-bindings/power/mt8192-power.h" - for MT8192 type power domain.
              "include/dt-bindings/power/mt8195-power.h" - for MT8195 type power domain.
              "include/dt-bindings/power/mediatek,mt8365-power.h" - for MT8365 type power domain.
        maxItems: 1

      clocks:
        description: |
          A number of phandles to clocks that need to be enabled during domain
          power-up sequencing.

      clock-names:
        description: |
          List of names of clocks, in order to match the power-up sequencing
          for each power domain we need to group the clocks by name. BASIC
          clocks need to be enabled before enabling the corresponding power
          domain, and should not have a '-' in their name (i.e mm, mfg, venc).
          SUSBYS clocks need to be enabled before releasing the bus protection,
          and should contain a '-' in their name (i.e mm-0, isp-0, cam-0).

          In order to follow properly the power-up sequencing, the clocks must
          be specified by order, adding first the BASIC clocks followed by the
          SUSBSYS clocks.

      domain-supply:
        description: domain regulator supply.

      mediatek,infracfg:
        $ref: /schemas/types.yaml#/definitions/phandle
        description: phandle to the device containing the INFRACFG register range.
        deprecated: true

      mediatek,infracfg-nao:
        $ref: /schemas/types.yaml#/definitions/phandle
        description: phandle to the device containing the INFRACFG-NAO register range.
        deprecated: true

      mediatek,smi:
        $ref: /schemas/types.yaml#/definitions/phandle
        description: phandle to the device containing the SMI register range.
        deprecated: true

    required:
      - reg

required:
  - compatible

allOf:
  - if:
      properties:
        compatible:
          contains:
            enum:
              - mediatek,mt8183-power-controller
    then:
      properties:
        access-controllers:
          minItems: 2
          maxItems: 2

  - if:
      properties:
        compatible:
          contains:
            enum:
              - mediatek,mt8365-power-controller
    then:
      properties:
        access-controllers:
          minItems: 3
          maxItems: 3

additionalProperties: false

examples:
  - |
    #include <dt-bindings/clock/mt8173-clk.h>
    #include <dt-bindings/power/mt8173-power.h>

    soc {
        #address-cells = <2>;
        #size-cells = <2>;

        scpsys: syscon@10006000 {
            compatible = "mediatek,mt8173-scpsys", "syscon", "simple-mfd";
            reg = <0 0x10006000 0 0x1000>;

            spm: power-controller {
                compatible = "mediatek,mt8173-power-controller";
                #address-cells = <1>;
                #size-cells = <0>;
                #power-domain-cells = <1>;

                /* power domains of the SoC */
                power-domain@MT8173_POWER_DOMAIN_VDEC {
                    reg = <MT8173_POWER_DOMAIN_VDEC>;
                    clocks = <&topckgen CLK_TOP_MM_SEL>;
                    clock-names = "mm";
                    #power-domain-cells = <0>;
                };
                power-domain@MT8173_POWER_DOMAIN_VENC {
                    reg = <MT8173_POWER_DOMAIN_VENC>;
                    clocks = <&topckgen CLK_TOP_MM_SEL>,
                             <&topckgen CLK_TOP_VENC_SEL>;
                    clock-names = "mm", "venc";
                    #power-domain-cells = <0>;
                };
                power-domain@MT8173_POWER_DOMAIN_ISP {
                    reg = <MT8173_POWER_DOMAIN_ISP>;
                    clocks = <&topckgen CLK_TOP_MM_SEL>;
                    clock-names = "mm";
                    #power-domain-cells = <0>;
                };
                power-domain@MT8173_POWER_DOMAIN_MM {
                    reg = <MT8173_POWER_DOMAIN_MM>;
                    clocks = <&topckgen CLK_TOP_MM_SEL>;
                    clock-names = "mm";
                    #power-domain-cells = <0>;
                    mediatek,infracfg = <&infracfg>;
                };
                power-domain@MT8173_POWER_DOMAIN_VENC_LT {
                    reg = <MT8173_POWER_DOMAIN_VENC_LT>;
                    clocks = <&topckgen CLK_TOP_MM_SEL>,
                             <&topckgen CLK_TOP_VENC_LT_SEL>;
                    clock-names = "mm", "venclt";
                    #power-domain-cells = <0>;
                };
                power-domain@MT8173_POWER_DOMAIN_AUDIO {
                    reg = <MT8173_POWER_DOMAIN_AUDIO>;
                    #power-domain-cells = <0>;
                };
                power-domain@MT8173_POWER_DOMAIN_USB {
                    reg = <MT8173_POWER_DOMAIN_USB>;
                    #power-domain-cells = <0>;
                };
                power-domain@MT8173_POWER_DOMAIN_MFG_ASYNC {
                    reg = <MT8173_POWER_DOMAIN_MFG_ASYNC>;
                    clocks = <&clk26m>;
                    clock-names = "mfg";
                    #address-cells = <1>;
                    #size-cells = <0>;
                    #power-domain-cells = <1>;

                    power-domain@MT8173_POWER_DOMAIN_MFG_2D {
                        reg = <MT8173_POWER_DOMAIN_MFG_2D>;
                        #address-cells = <1>;
                        #size-cells = <0>;
                        #power-domain-cells = <1>;

                        power-domain@MT8173_POWER_DOMAIN_MFG {
                            reg = <MT8173_POWER_DOMAIN_MFG>;
                            #power-domain-cells = <0>;
                            mediatek,infracfg = <&infracfg>;
                        };
                    };
                };
            };
        };
    };