# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/soc/renesas/renesas,rzn1-gpioirqmux.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Renesas RZ/N1 SoCs GPIO Interrupt Multiplexer

description: |
   The Renesas RZ/N1 GPIO Interrupt Multiplexer multiplexes GPIO interrupt
   lines to the interrupt controller available in the SoC.

   It selects up to 8 of the 96 GPIO interrupt lines available and connect them
   to 8 output interrupt lines.

maintainers:
  - Herve Codina <herve.codina@bootlin.com>

properties:
  compatible:
    items:
      - enum:
          - renesas,r9a06g032-gpioirqmux
      - const: renesas,rzn1-gpioirqmux

  reg:
    maxItems: 1

  "#address-cells":
    const: 0

  "#interrupt-cells":
    const: 1

  interrupt-map-mask:
    items:
      - const: 0x7f

  interrupt-map:
    description: |
      Specifies the mapping from external GPIO interrupt lines to the output
      interrupts. The array has up to 8 items defining the mapping related to
      the output line 0 (GIC 103) up to the output line 7 (GIC 110).

      The child interrupt number set in arrays items is computed using the
      following formula:
          gpio_bank * 32 + gpio_number
      with:
        - gpio_bank: The GPIO bank number
            - 0 for GPIO0A,
            - 1 for GPIO1A,
            - 2 for GPIO2A
        - gpio_number: Number of the gpio in the bank (0..31)
    minItems: 1
    maxItems: 8

required:
  - compatible
  - reg
  - "#address-cells"
  - "#interrupt-cells"
  - interrupt-map-mask
  - interrupt-map

additionalProperties: false

examples:
  - |
    #include <dt-bindings/interrupt-controller/arm-gic.h>

    gic: interrupt-controller {
        interrupt-controller;
        #address-cells = <0>;
        #interrupt-cells = <3>;
    };

    interrupt-controller@51000480 {
        compatible = "renesas,r9a06g032-gpioirqmux", "renesas,rzn1-gpioirqmux";
        reg = <0x51000480 0x20>;
        #address-cells = <0>;
        #interrupt-cells = <1>;
        interrupt-map-mask = <0x7f>;
        interrupt-map =
            <32 &gic GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, /* line 0, GPIO1A.0 */
            <89 &gic GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, /* line 1, GPIO2A.25 */
            <9 &gic GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; /* line 3, GPIO0A.9 */
    };