pldmtool: Add state_set_id argument to GetStateSensorReadings
Support parsing state set values in the GetStateSensorReadings command
response by passing state_set_id argument.
Usage:
```
# pldmtool platform GetStateSensorReadings --help
get the state sensor readings
Usage: pldmtool platform GetStateSensorReadings [OPTIONS]
Options:
...
-s,--state_set_id UINT State Set ID that should be used for data
interpretation
```
Parsing example before:
```
~# pldmtool platform GetStateSensorReadings \
--sensor_id=203 \
--rearm=0 \
-m 10
{
"compositeSensorCount": 1,
"sensorOpState[0]": "Sensor Enabled",
"presentState[0]": "2",
"previousState[0]": "0",
"eventState[0]": "2"
}
```
After:
```
~# pldmtool platform GetStateSensorReadings \
--sensor_id=203 \
--rearm=0 -m 10 \
--state_set_id 33
{
"compositeSensorCount": 1,
"sensorOpState[0]": "Sensor Enabled",
"presentState[0]": "Disconnected(2)",
"previousState[0]": "0",
"eventState[0]": "Disconnected(2)"
}
```
Change-Id: Id3002086cc6429bb0df2d53c300ced6165722c8f
Signed-off-by: Konstantin Aladyshev <aladyshev22@gmail.com>
PLDM (Platform Level Data Model) is a key component of the OpenBMC project, providing a standardized data model and message formats for various platform management functionalities. It defines a method to manage, monitor, and control the firmware and hardware of a system.
The OpenBMC PLDM project aims to implement the specifications defined by the Distributed Management Task Force (DMTF), allowing for interoperable management interfaces across different hardware and firmware components.
To build and run PLDM, you need the following dependencies:
MesonNinjaAlternatively, source an OpenBMC ARM/x86 SDK.
To build the PLDM project, follow these steps:
meson setup build && meson compile -C build
The simplest way of running the tests is as described by the meson man page:
meson test -C build
Alternatively, tests can be run in the OpenBMC CI docker container using these steps.
pldm daemon accepts a command line argument --verbose or --v or -v to enable the daemon to run in verbose mode. It can be done via adding this option to the environment file that pldm service consumes.
echo 'PLDMD_ARGS="--verbose"' > /etc/default/pldmd systemctl restart pldmd
rm /etc/default/pldmd systemctl restart pldmd
For complete documentation on the functionality and usage of this repository, please refer to the docs folder.