| // InclusiveLanguage:ignore-terms(whitelist, whitelisted) |
| // NOLINTBEGIN |
| /* |
| // Copyright (c) 2019 Intel Corporation |
| // |
| // Licensed under the Apache License, Version 2.0 (the "License"); |
| // you may not use this file except in compliance with the License. |
| // You may obtain a copy of the License at |
| // |
| // http://www.apache.org/licenses/LICENSE-2.0 |
| // |
| // Unless required by applicable law or agreed to in writing, software |
| // distributed under the License is distributed on an "AS IS" BASIS, |
| // WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| // See the License for the specific language governing permissions and |
| // limitations under the License. |
| */ |
| #pragma once |
| |
| #include <array> |
| |
| #include "registries.hpp" |
| |
| /* |
| Please read this before making edits to the structure below. |
| |
| Messages in this registry are intended to be generally useful across |
| OpenBMC systems. To that end, there are a number of guidelines needed for |
| messages in this file to remain useful across systems. |
| |
| 1. Messages should not be specific to a piece or type of hardware. Generally |
| this involves not using terms like "CPU", "Drive", "Backplane", etc in the |
| message strings, unless that behavior is specific to that particular piece of |
| hardware. |
| Incorrect: MemoryOverheated |
| Correct: DeviceOverheated |
| Correct: MemoryECCError (ECC is specific to memory, therefore class specific |
| is acceptable) |
| |
| 2. Messages should not use any proprietary, copyright, or company-specific |
| terms. In general, messages should prefer the industry accepted term. |
| |
| 3. Message strings should be human readable, and read like a normal |
| sentence. This generally involves placing the substitution parameters in the |
| appropriate place in the string. |
| |
| Incorrect: "An error occurred. Device: %1" |
| |
| Correct: "An error occurred on device %1". |
| |
| 4. Message registry versioning semantics shall be obeyed. Adding new |
| messages require an increment to the subminor revision. Changes to existing |
| messages require an increment to the patch version. If the copyright year is |
| different than the current date, increment it when the version is changed. |
| |
| 5. If you are changing this in your own downstream company-specific fork, |
| please change the "id" field below away from "OpenBMC.0.X.X" to something of |
| the form of "CompanyName.0.X.X". This is to ensure that when a system is |
| found in industry that has modified this registry, it can be differentiated |
| from the OpenBMC project maintained registry. |
| |
| 6. Keep the below list alphabetized by message id. |
| */ |
| |
| namespace redfish::registries::openbmc { |
| const Header header = { |
| "Copyright 2022 OpenBMC. All rights reserved.", |
| "#MessageRegistry.v1_4_0.MessageRegistry", |
| "OpenBMC.0.4.0", |
| "OpenBMC Message Registry", |
| "en", |
| "This registry defines the base messages for OpenBMC.", |
| "OpenBMC", |
| "0.4.0", |
| "OpenBMC", |
| }; |
| constexpr std::array registry = { |
| MessageEntry{"AmpereEvent", |
| { |
| "Indicates an Ampere OK event", |
| "%1", |
| "OK", |
| 1, |
| { |
| "string", |
| }, |
| "None.", |
| }}, |
| MessageEntry{"AmpereCritical", |
| { |
| "Indicates an Ampere critical event", |
| "%1: %2", |
| "Critical", |
| 2, |
| { |
| "string", |
| "string", |
| }, |
| "None.", |
| }}, |
| MessageEntry{"AmpereWarning", |
| { |
| "Indicates an Ampere warning event", |
| "%1: %2", |
| "Warning", |
| 2, |
| { |
| "string", |
| "string", |
| }, |
| "None.", |
| }}, |
| MessageEntry{"MemoryExtendedECCCEData", |
| { |
| "Indicates additional Memory ECC Correctable error data.", |
| "Memory ECC Correctable Error Extended Data. bank=%1 " |
| "row=%2 column=%3.", |
| "Critical", |
| 3, |
| { |
| "number", |
| "number", |
| "number", |
| }, |
| "None.", |
| }}, |
| MessageEntry{ |
| "MemoryExtendedECCUEData", |
| { |
| "Indicates additional Memory ECC Uncorrectable error data.", |
| "Memory ECC Uncorrectable Error Extended Data. bank=%1 " |
| "row=%2 column=%3.", |
| "Critical", |
| 3, |
| { |
| "number", |
| "number", |
| "number", |
| }, |
| "None.", |
| }}, |
| MessageEntry{ |
| "ADDDCCorrectable", |
| { |
| "Indicates an ADDDC Correctable Error.", |
| "ADDDC Correctable Error.Socket=%1 Channel=%2 DIMM=%3 Rank=%4.", |
| "Warning", |
| 4, |
| { |
| "number", |
| "string", |
| "number", |
| "number", |
| }, |
| "None.", |
| }}, |
| MessageEntry{ |
| "AtScaleDebugFeatureEnabledAtHardware", |
| { |
| "Indicates that At-Scale Debug enable is detected in hardware.", |
| "At-Scale Debug Feature is enabled in hardware.", |
| "Critical", |
| 0, |
| {}, |
| "None.", |
| }}, |
| MessageEntry{ |
| "AtScaleDebugFeatureDisabledAtHardware", |
| { |
| "Indicates that At-Scale Debug disable is detected in hardware.", |
| "At-Scale Debug Feature is disabled in hardware.", |
| "OK", |
| 0, |
| {}, |
| "None.", |
| }}, |
| MessageEntry{"AtScaleDebugFeatureEnabled", |
| { |
| "Indicates that At-Scale Debug service is started.", |
| "At-Scale Debug service is started.", |
| "Critical", |
| 0, |
| {}, |
| "None.", |
| }}, |
| MessageEntry{"AtScaleDebugFeatureDisabled", |
| { |
| "Indicates that At-Scale Debug service is stopped.", |
| "At-Scale Debug service is stopped.", |
| "OK", |
| 0, |
| {}, |
| "None.", |
| }}, |
| MessageEntry{"AtScaleDebugConnected", |
| { |
| "Indicates At-Scale Debug connection has been established", |
| "At-Scale Debug service is now connected %1", |
| "Critical", |
| 1, |
| {"string"}, |
| "None.", |
| }}, |
| MessageEntry{"AtScaleDebugDisconnected", |
| { |
| "Indicates At-Scale Debug connection has ended", |
| "At-Scale Debug service is now disconnected", |
| "OK", |
| 0, |
| {}, |
| "None.", |
| }}, |
| MessageEntry{"AtScaleDebugConnectionFailed", |
| { |
| "Indicates At-Scale Debug connection aborted/failed", |
| "At-Scale Debug connection aborted/failed", |
| "Critical", |
| 0, |
| {}, |
| "None.", |
| }}, |
| MessageEntry{"AtScaleDebugSpecialUserEnabled", |
| { |
| "Indicates that special user is enabled.", |
| "At-Scale Debug special user is enabled", |
| "Critical", |
| 0, |
| {}, |
| "None.", |
| }}, |
| MessageEntry{"AtScaleDebugSpecialUserDisabled", |
| { |
| "Indicates that special user is disabled.", |
| "At-Scale Debug special user is disabled", |
| "OK", |
| 0, |
| {}, |
| "None.", |
| }}, |
| |
| MessageEntry{"BIOSAttributesChanged", |
| { |
| "Indicates that a set of BIOS Attributes has changed.", |
| "Set of BIOS Attributes changed.", |
| "OK", |
| 0, |
| {}, |
| "None.", |
| }}, |
| MessageEntry{ |
| "BIOSBoot", |
| { |
| "Indicates BIOS has transitioned control to the OS Loader.", |
| "BIOS System Boot.", |
| "OK", |
| 0, |
| {}, |
| "None.", |
| }}, |
| MessageEntry{"BIOSFirmwarePanicReason", |
| { |
| "Indicates the reason for BIOS firmware panic.", |
| "BIOS firmware panic occurred due to %1.", |
| "Warning", |
| 1, |
| { |
| "string", |
| }, |
| "None.", |
| }}, |
| MessageEntry{"BIOSFirmwareRecoveryReason", |
| { |
| "Indicates the reason for BIOS firmware recovery.", |
| "BIOS firmware recovery occurred due to %1.", |
| "Warning", |
| 1, |
| { |
| "string", |
| }, |
| "None.", |
| }}, |
| MessageEntry{"BIOSFirmwareResiliencyError", |
| { |
| "Indicates BIOS firmware encountered resilience error.", |
| "BIOS firmware resiliency error. Error reason: %1.", |
| "Critical", |
| 1, |
| { |
| "string", |
| }, |
| "None.", |
| }}, |
| MessageEntry{ |
| "BIOSPOSTCode", |
| { |
| "BIOS Power-On Self-Test Code received", |
| "Boot Count: %1; Time Stamp Offset: %2 seconds; POST Code: %3", |
| "OK", |
| 3, |
| {"number", "number", "number"}, |
| "None.", |
| }}, |
| MessageEntry{"BIOSPOSTError", |
| { |
| "Indicates BIOS POST has encountered an error.", |
| "BIOS POST Error. Error Code=%1", |
| "Warning", |
| 1, |
| {"number"}, |
| "None.", |
| }}, |
| MessageEntry{"BIOSRecoveryComplete", |
| { |
| "Indicates BIOS Recovery has completed.", |
| "BIOS Recovery Complete.", |
| "OK", |
| 0, |
| {}, |
| "None.", |
| }}, |
| MessageEntry{"BIOSRecoveryStart", |
| { |
| "Indicates BIOS Recovery has started.", |
| "BIOS Recovery Start.", |
| "Warning", |
| 0, |
| {}, |
| "None.", |
| }}, |
| MessageEntry{"BMCBootReason", |
| { |
| "Indicates the reason why BMC firmware booted.", |
| "BMC firmware version %1 booted due to %2.", |
| "OK", |
| 2, |
| { |
| "string", |
| "string", |
| }, |
| "None.", |
| }}, |
| MessageEntry{"BMCFirmwarePanicReason", |
| { |
| "Indicates the reason for last BMC firmware panic.", |
| "BMC firmware panic occurred due to %1.", |
| "Warning", |
| 1, |
| { |
| "string", |
| }, |
| "None.", |
| }}, |
| MessageEntry{"BMCFirmwareRecoveryReason", |
| { |
| "Indicates the reason for last BMC firmware recovery.", |
| "BMC firmware recovery occurred due to %1.", |
| "Warning", |
| 1, |
| { |
| "string", |
| }, |
| "None.", |
| }}, |
| MessageEntry{"BMCFirmwareResiliencyError", |
| { |
| "Indicates BMC firmware encountered resilience error.", |
| "BMC firmware resiliency error. Error reason: %1.", |
| "Critical", |
| 1, |
| { |
| "string", |
| }, |
| "None.", |
| }}, |
| MessageEntry{"BMCKernelPanic", |
| { |
| "Indicates that BMC kernel panic occurred.", |
| "BMC rebooted due to kernel panic.", |
| "OK", |
| 0, |
| {}, |
| "None.", |
| }}, |
| MessageEntry{"ChassisIntrusionDetected", |
| { |
| "Indicates that a physical security event " |
| "of the chassis intrusion has occurred.", |
| "Chassis Intrusion Detected.", |
| "Warning", |
| 0, |
| {}, |
| "None.", |
| }}, |
| MessageEntry{"ChassisIntrusionReset", |
| { |
| "Indicates that chassis intrusion status has recovered.", |
| "Chassis Intrusion Reset.", |
| "OK", |
| 0, |
| {}, |
| "None.", |
| }}, |
| MessageEntry{ |
| "ComponentOverTemperature", |
| { |
| "Indicates that the specified component is over temperature.", |
| "%1 over temperature and being throttled.", |
| "Critical", |
| 1, |
| {"string"}, |
| "None.", |
| }}, |
| MessageEntry{"CPLDFirmwarePanicReason", |
| { |
| "Indicates the reason for CPLD firmware panic.", |
| "CPLD firmware panic occurred due to %1.", |
| "Warning", |
| 1, |
| { |
| "string", |
| }, |
| "None.", |
| }}, |
| MessageEntry{"CPLDFirmwareRecoveryReason", |
| { |
| "Indicates the reason for CPLD firmware recovery.", |
| "CPLD firmware recovery occurred due to %1.", |
| "Warning", |
| 1, |
| { |
| "string", |
| }, |
| "None.", |
| }}, |
| MessageEntry{"CPLDFirmwareResiliencyError", |
| { |
| "Indicates CPLD firmware encountered resilience error.", |
| "CPLD firmware resiliency error. Error reason: %1.", |
| "Critical", |
| 1, |
| { |
| "string", |
| }, |
| "None.", |
| }}, |
| MessageEntry{"CPUError", |
| { |
| "Indicates that a CPU Error occurred of " |
| "the specified type or cause.", |
| "CPU Error Occurred: %1.", |
| "Critical", |
| 1, |
| {"string"}, |
| "None.", |
| }}, |
| MessageEntry{"CPUMismatch", |
| { |
| "Indicates that the specified CPU power/current " |
| "rating is incompatible with the board.", |
| "CPU %1 Mismatch.", |
| "Critical", |
| 1, |
| {"number"}, |
| "Install the supported CPU.", |
| }}, |
| MessageEntry{"CPUThermalTrip", |
| { |
| "Indicates that the specified CPU thermal " |
| "trip has been asserted.", |
| "CPU %1 Thermal Trip.", |
| "Critical", |
| 1, |
| {"number"}, |
| "None.", |
| }}, |
| MessageEntry{"DCPowerOff", |
| { |
| "Indicates that the system DC power is off.", |
| "Host system DC power is off", |
| "OK", |
| 0, |
| {}, |
| "None.", |
| }}, |
| MessageEntry{"DCPowerOn", |
| { |
| "Indicates that the system DC power is on.", |
| "Host system DC power is on", |
| "OK", |
| 0, |
| {}, |
| "None.", |
| }}, |
| MessageEntry{"DriveError", |
| { |
| "Indicates that a Drive Error occurred of " |
| "the specified type or cause.", |
| "Drive Error Occurred: %1.", |
| "Warning", |
| 1, |
| {"string"}, |
| "None.", |
| }}, |
| MessageEntry{"EventLogCleared", |
| { |
| "Indicates that the event log has been cleared.", |
| "Event Log Cleared.", |
| "OK", |
| 0, |
| {}, |
| "None.", |
| }}, |
| MessageEntry{"FanInserted", |
| { |
| "Indicates that a system fan has been inserted.", |
| "%1 inserted.", |
| "OK", |
| 1, |
| {"string"}, |
| "None.", |
| }}, |
| MessageEntry{"FanRedundancyLost", |
| { |
| "Indicates that system fan redundancy has been lost.", |
| "Fan redundancy lost.", |
| "Warning", |
| 0, |
| {}, |
| "None.", |
| }}, |
| MessageEntry{"FanRedundancyRegained", |
| { |
| "Indicates that system fan redundancy has been regained.", |
| "Fan redundancy regained.", |
| "OK", |
| 0, |
| {}, |
| "None.", |
| }}, |
| MessageEntry{"FanRemoved", |
| { |
| "Indicates that a system fan has been removed.", |
| "%1 removed.", |
| "OK", |
| 0, |
| {"string"}, |
| "None.", |
| }}, |
| MessageEntry{ |
| "FirmwareActivationCompleted", |
| { |
| "Indicates a firmware activation has completed successfully.", |
| "%1 firmware activation completed successfully.", |
| "OK", |
| 1, |
| {"string"}, |
| "None.", |
| }}, |
| MessageEntry{"FirmwareActivationFailed", |
| { |
| "Indicates a firmware activation has failed.", |
| "%1 firmware activation failed: %2.", |
| "Warning", |
| 2, |
| {"string", "string"}, |
| "None.", |
| }}, |
| MessageEntry{"FirmwareActivationStarted", |
| { |
| "Indicates a firmware activation has started.", |
| "%1 firmware activation started.", |
| "OK", |
| 1, |
| {"string"}, |
| "None.", |
| }}, |
| MessageEntry{"FirmwareResiliencyError", |
| { |
| "Indicates firmware encountered resilience error.", |
| "Firmware resiliency error. Error reason: %1.", |
| "Critical", |
| 1, |
| { |
| "string", |
| }, |
| "None.", |
| }}, |
| MessageEntry{"FirmwareUpdateCompleted", |
| { |
| "Indicates a firmware update has completed successfully.", |
| "%1 firmware update to version %2 completed " |
| "successfully.", |
| "OK", |
| 2, |
| {"string", "string"}, |
| "None.", |
| }}, |
| MessageEntry{"FirmwareUpdateFailed", |
| { |
| "Indicates a firmware update has failed.", |
| "%1 firmware update to version %2 failed: %3.", |
| "Warning", |
| 3, |
| {"string", "string", "string"}, |
| "None.", |
| }}, |
| MessageEntry{"FirmwareUpdateStaged", |
| { |
| "Indicates a firmware update has staged successfully.", |
| "%1 firmware update to version %2 staged successfully.", |
| "OK", |
| 2, |
| {"string", "string"}, |
| "None.", |
| }}, |
| MessageEntry{"FirmwareUpdateStarted", |
| { |
| "Indicates a firmware update has started.", |
| "%1 firmware update to version %2 started.", |
| "OK", |
| 2, |
| {"string", "string"}, |
| "None.", |
| }}, |
| MessageEntry{ |
| "GeneralFirmwareSecurityViolation", |
| { |
| "Indicates a general firmware security violation has occurred.", |
| "Firmware security violation: %1.", |
| "Critical", |
| 1, |
| {"string"}, |
| "None.", |
| }}, |
| MessageEntry{"InvalidLoginAttempted", |
| { |
| "Indicates that a login was attempted on the specified " |
| "interface with an invalid username or password.", |
| "Invalid username or password attempted on %1.", |
| "Warning", |
| 1, |
| {"string"}, |
| "None.", |
| }}, |
| MessageEntry{"InvalidUpload", |
| { |
| "Indicates that the uploaded file was invalid.", |
| "Invalid file uploaded to %1: %2.", |
| "Warning", |
| 2, |
| {"string", "string"}, |
| "None.", |
| }}, |
| MessageEntry{ |
| "InventoryAdded", |
| { |
| "Indicates that an inventory item with the specified model, " |
| "type, and serial number was installed.", |
| "%1 %2 with serial number %3 was installed.", |
| "OK", |
| 3, |
| |
| { |
| "string", |
| "string", |
| "string", |
| }, |
| "None.", |
| }}, |
| MessageEntry{ |
| "InventoryRemoved", |
| { |
| "Indicates that an inventory item with the specified model, " |
| "type, and serial number was removed.", |
| "%1 %2 with serial number %3 was removed.", |
| "OK", |
| 3, |
| |
| { |
| "string", |
| "string", |
| "string", |
| }, |
| "None.", |
| }}, |
| MessageEntry{ |
| "IntelUPILinkWidthReducedToHalf", |
| { |
| "Indicates Intel UPI link width has reduced to half width.", |
| "Intel UPI link width reduced to half. Node=%1.", |
| "Warning", |
| 1, |
| |
| { |
| "number", |
| }, |
| "None.", |
| }}, |
| MessageEntry{ |
| "IntelUPILinkWidthReducedToQuarter", |
| { |
| "Indicates Intel UPI link width has reduced to quarter width.", |
| "Intel UPI link width reduced to quarter. Node=%1.", |
| "Warning", |
| 1, |
| |
| { |
| "number", |
| }, |
| "None.", |
| }}, |
| |
| MessageEntry{"IPMIWatchdog", |
| { |
| "Indicates that there is a host watchdog event.", |
| "Host Watchdog Event: %1", |
| "OK", |
| 1, |
| { |
| "string", |
| }, |
| "None.", |
| }}, |
| MessageEntry{"LanLost", |
| { |
| "Indicates that a physical security event " |
| "of the LAN leash has lost.", |
| "%1 LAN leash lost.", |
| "Warning", |
| 1, |
| { |
| "string", |
| }, |
| "None.", |
| }}, |
| MessageEntry{"LanRegained", |
| { |
| "Indicates that LAN link status has reconnected.", |
| "%1 LAN leash regained.", |
| "OK", |
| 1, |
| { |
| "string", |
| }, |
| "None.", |
| }}, |
| MessageEntry{"LegacyPCIPERR", |
| { |
| "Indicates a Legacy PCI PERR.", |
| "Legacy PCI PERR. Bus=%1 Device=%2 Function=%3.", |
| "Warning", |
| 3, |
| |
| { |
| "number", |
| "number", |
| "number", |
| }, |
| "None.", |
| }}, |
| MessageEntry{"LegacyPCISERR", |
| { |
| "Indicates a Legacy PCI SERR.", |
| "Legacy PCI SERR. Bus=%1 Device=%2 Function=%3.", |
| "Critical", |
| 3, |
| |
| { |
| "number", |
| "number", |
| "number", |
| }, |
| "None.", |
| }}, |
| MessageEntry{"ManufacturingModeEntered", |
| { |
| "Indicates that the BMC entered Factory, " |
| "or Manufacturing mode.", |
| "Entered Manufacturing Mode.", |
| "Critical", |
| 0, |
| {}, |
| "None.", |
| }}, |
| MessageEntry{"ManufacturingModeExited", |
| { |
| "Indicates that the BMC exited Factory, " |
| "or Manufacturing mode.", |
| "Exited Manufacturing Mode.", |
| "OK", |
| 0, |
| {}, |
| "None.", |
| }}, |
| MessageEntry{"MEAutoConfigFailed", |
| { |
| "Indicates that Intel ME power sensor " |
| "auto-configuration has failed.", |
| "Intel ME power sensor auto-configuration failed. Power " |
| "monitoring, limiting and HW protection features might " |
| "be unavailable. Failure reason: %1", |
| "Critical", |
| 1, |
| {"string"}, |
| "Ensure that Intel ME configuration for power " |
| "sources is correct.", |
| }}, |
| MessageEntry{ |
| "MEAutoConfigSuccess", |
| { |
| "Indicates that Intel ME has performed successful " |
| "power sensor auto-configuration.", |
| "Intel ME power sensor auto-configuration succeeded. " |
| "Determined sources for domain readings are: DC Power: %1 ; " |
| "Chassis Power: %2 ; PSU Efficiency: %3 ; Unamanaged power: %4", |
| "OK", |
| 4, |
| {"string", "string", "string", "string"}, |
| "None.", |
| }}, |
| MessageEntry{"MEBootGuardHealthEvent", |
| { |
| "Indicates that Intel ME has detected error during " |
| "operations of Intel Boot Guard", |
| "Intel ME has detected following issue with Intel Boot " |
| "Guard: %1", |
| "Critical", |
| 1, |
| {"string"}, |
| "None.", |
| }}, |
| MessageEntry{"MECpuDebugCapabilityDisabled", |
| { |
| "Indicates that Intel ME has detected situation in " |
| "which CPU Debug Capability is disabled.", |
| "CPU Debug Capability disabled", |
| "Warning", |
| 0, |
| {}, |
| "None.", |
| }}, |
| MessageEntry{"MEDirectFlashUpdateRequested", |
| { |
| "Indicates that BIOS has requested Direct Flash " |
| "Update (DFU) of Intel ME", |
| "Intel ME Firmware switched to recovery mode to perform " |
| "full update from BIOS.", |
| "OK", |
| 0, |
| {}, |
| "This is transient state. Intel ME Firmware should " |
| "return to operational mode after successful image " |
| "update performed by the BIOS.", |
| }}, |
| MessageEntry{ |
| "MEExceptionDuringShutdown", |
| { |
| "Indicates that Intel ME could not successfully " |
| "perform emergency host shutdown.", |
| "Power Down command triggered by Intel Node Manager policy " |
| "failure action and Intel ME forced shutdown. BMC probably did " |
| "not respond correctly to Chassis Control.", |
| "Warning", |
| 0, |
| {}, |
| "Verify the Intel Node Manager policy configuration.", |
| }}, |
| MessageEntry{ |
| "MEFactoryResetError", |
| { |
| "Indicates that Intel ME has ben restored to factory preset.", |
| "Intel ME has performed automatic reset to factory " |
| "presets due to following reason: %1", |
| "Critical", |
| 1, |
| {"string"}, |
| "If error is persistent the Flash device must be replaced.", |
| }}, |
| MessageEntry{ |
| "MEFactoryRestore", |
| { |
| "Indicates that Intel ME has ben restored to factory preset.", |
| "Intel ME has performed automatic reset to factory " |
| "presets due to following reason: %1", |
| "OK", |
| 1, |
| {"string"}, |
| "If error is persistent the Flash device must be replaced.", |
| }}, |
| MessageEntry{ |
| "MEFirmwareException", |
| { |
| "Indicates that Intel ME has encountered firmware " |
| "exception during execution.", |
| "Intel ME has encountered firmware exception. Error code = %1", |
| "Warning", |
| 1, |
| {"string"}, |
| "Restore factory presets using Force ME Recovery IPMI " |
| "command or by doing AC power cycle with Recovery jumper " |
| "asserted. If this does not clear the issue, reflash the SPI " |
| "flash. If the issue persists, provide the content of error " |
| "code to Intel support team for interpretation. (Error codes " |
| "are not documented because they only provide clues that must " |
| "be interpreted individually..", |
| }}, |
| MessageEntry{"MEFirmwarePanicReason", |
| { |
| "Indicates the reason for ME firmware panic.", |
| "ME firmware panic occurred due to %1.", |
| "Warning", |
| 1, |
| { |
| "string", |
| }, |
| "None.", |
| }}, |
| MessageEntry{"MEFirmwareRecoveryReason", |
| { |
| "Indicates the reason for ME firmware recovery.", |
| "ME firmware recovery occurred due to %1.", |
| "Warning", |
| 1, |
| { |
| "string", |
| }, |
| "None.", |
| }}, |
| MessageEntry{"MEFirmwareResiliencyError", |
| { |
| "Indicates ME firmware encountered resilience error.", |
| "ME firmware resiliency error. Error reason: %1.", |
| "Critical", |
| 1, |
| { |
| "string", |
| }, |
| "None.", |
| }}, |
| |
| MessageEntry{"MEFlashEraseError", |
| { |
| "Indicates that Intel ME was unable to finish flash " |
| "erase procedure.", |
| "Intel ME has encountered an error during Flash erasure " |
| "procedure probably due to Flash part corruption.", |
| "Critical", |
| 0, |
| {}, |
| "The Flash device must be replaced.", |
| }}, |
| MessageEntry{"MEFlashStateInformation", |
| { |
| "Indicates that Intel ME has encountered a problem " |
| "during IO to flash device.", |
| "Intel ME has encountered problem during IO to flash " |
| "device. Reason: %1", |
| "Critical", |
| 1, |
| {"string"}, |
| "If flash wear-out protection occurred wait until it " |
| "expires. Otherwise - flash device must be replaced.", |
| }}, |
| MessageEntry{"MEFlashStateInformationWritingEnabled", |
| { |
| "Indicates that Intel ME has encountered a problem " |
| "during IO to flash device.", |
| "Intel ME has encountered problem during IO to flash " |
| "device. Reason: %1", |
| "OK", |
| 1, |
| {"string"}, |
| "If flash wear-out protection occurred wait until it " |
| "expires. Otherwise - flash device must be replaced.", |
| }}, |
| MessageEntry{"MEFlashVerificationError", |
| { |
| "Indicates that Intel ME encountered invalid flash " |
| "descriptor region.", |
| "Intel ME has detected invalid flash descriptor region. " |
| "Following error is detected: %1", |
| "Critical", |
| 1, |
| {"string"}, |
| "Flash Descriptor Region must be created correctly.", |
| }}, |
| MessageEntry{ |
| "MEFlashWearOutWarning", |
| { |
| "Indicates that Intel ME has reached certain " |
| "threshold of flash write operations.", |
| "Warning threshold for number of flash operations has been " |
| "exceeded. Current percentage of write operations capacity: %1", |
| "Warning", |
| 1, |
| {"number"}, |
| "No immediate repair action needed.", |
| }}, |
| |
| MessageEntry{ |
| "MEImageExecutionFailed", |
| { |
| "Indicates that Intel ME could not load primary FW image.", |
| "Intel ME Recovery Image or backup operational image " |
| "loaded because operational image is corrupted. This " |
| "may be either caused by Flash device corruption or " |
| "failed upgrade procedure.", |
| "Critical", |
| 0, |
| {}, |
| "Either the Flash device must be replaced (if error is " |
| "persistent) or the upgrade procedure must be started again.", |
| }}, |
| |
| MessageEntry{ |
| "MEInternalError", |
| { |
| "Indicates that Intel ME encountered " |
| "internal error leading to watchdog reset.", |
| "Error during Intel ME execution. Watchdog " |
| "timeout has expired.", |
| "Critical", |
| 0, |
| {}, |
| "Firmware should automatically recover from error state. " |
| "If error is persistent then operational image shall be updated " |
| "or hardware board repair is needed.", |
| }}, |
| MessageEntry{"MEManufacturingError", |
| { |
| "Indicates that Intel ME is unable to start in " |
| "operational mode due to wrong configuration.", |
| "Wrong manufacturing configuration detected by Intel ME " |
| "Firmware. Unable to start operational mode. Reason: %1", |
| "Critical", |
| 1, |
| {"string"}, |
| " If error is persistent the Flash device must be " |
| "replaced or FW configuration must be updated. Trace " |
| "logs might be gathered for detailed information.", |
| }}, |
| MessageEntry{"MEMctpInterfaceError", |
| { |
| "Indicates that Intel ME has encountered an error " |
| "in MCTP protocol.", |
| "Intel ME has detected MCTP interface failure and it is " |
| "not functional any more. It may indicate the situation " |
| "when MCTP was not configured by BIOS or a defect which " |
| "may need a Host reset to recover from. Details: %1", |
| "Critical", |
| 1, |
| {"string"}, |
| "Recovery via CPU Host reset or platform reset. If error " |
| "is persistent, deep-dive platform-level debugging is " |
| "required.", |
| }}, |
| MessageEntry{"MemoryECCCorrectable", |
| { |
| "Indicates a Correctable Memory ECC error.", |
| "Memory ECC correctable error. Socket=%1 " |
| "Channel=%2 DIMM=%3 Rank=%4.", |
| "Warning", |
| 4, |
| |
| { |
| "number", |
| "string", |
| "number", |
| "number", |
| }, |
| "None.", |
| }}, |
| MessageEntry{"MemoryECCUncorrectable", |
| { |
| "Indicates an Uncorrectable Memory ECC error.", |
| "Memory ECC uncorrectable error. Socket=%1 Channel=%2 " |
| "DIMM=%3 Rank=%4.", |
| "Critical", |
| 4, |
| |
| { |
| "number", |
| "string", |
| "number", |
| "number", |
| }, |
| "None.", |
| }}, |
| MessageEntry{"MemoryParityCommandAndAddress", |
| { |
| "Indicates a Command and Address parity error.", |
| "Command and Address parity error. Socket=%1 Channel=%2 " |
| "DIMM=%3 ChannelValid=%4 DIMMValid=%5.", |
| "Critical", |
| 5, |
| |
| { |
| "number", |
| "string", |
| "number", |
| "number", |
| "number", |
| }, |
| "None.", |
| }}, |
| MessageEntry{"MemoryParityNotKnown", |
| { |
| "Indicates an unknown parity error.", |
| "Memory parity error. Socket=%1 Channel=%2 " |
| "DIMM=%3 ChannelValid=%4 DIMMValid=%5.", |
| "Critical", |
| 5, |
| |
| { |
| "number", |
| "string", |
| "number", |
| "number", |
| "number", |
| }, |
| "None.", |
| }}, |
| MessageEntry{"MemoryRASConfigurationDisabled", |
| { |
| "Indicates Memory RAS Disabled Configuration Status.", |
| "Memory RAS Configuration Disabled. Error=%1 Mode=%2.", |
| "OK", |
| 2, |
| { |
| "string", |
| "string", |
| }, |
| "None.", |
| }}, |
| MessageEntry{"MemoryRASConfigurationEnabled", |
| { |
| "Indicates Memory RAS Enabled Configuration Status.", |
| "Memory RAS Configuration Enabled. Error=%1 Mode=%2.", |
| "OK", |
| 2, |
| { |
| "string", |
| "string", |
| }, |
| "None.", |
| }}, |
| MessageEntry{"MemoryRASModeDisabled", |
| { |
| "Indicates Memory RAS Disabled Mode Selection.", |
| "Memory RAS Mode Select Disabled. Prior Mode=%1 " |
| "Selected Mode=%2.", |
| "OK", |
| 2, |
| { |
| "string", |
| "string", |
| }, |
| "None.", |
| }}, |
| MessageEntry{"MemoryRASModeEnabled", |
| { |
| "Indicates Memory RAS Enabled Mode Selection.", |
| "Memory RAS Mode Select Enabled. Prior Mode=%1 Selected " |
| "Mode=%2.", |
| "OK", |
| 2, |
| { |
| "string", |
| "string", |
| }, |
| "None.", |
| }}, |
| MessageEntry{"MemoryThermTrip", |
| { |
| "Indicates that the system memory ThermTrip is asserted " |
| "by the specified component.", |
| "Memory ThermTrip asserted: %1.", |
| "Critical", |
| 1, |
| {"string"}, |
| "None.", |
| }}, |
| MessageEntry{"MEMultiPchModeMisconfig", |
| { |
| "Indicates that Intel ME has encountered " |
| "problems in initializing Multi-PCH mode.", |
| "Intel ME error in Multi-PCH mode: %1", |
| "Critical", |
| 1, |
| {"string"}, |
| "None.", |
| }}, |
| MessageEntry{ |
| "MEPeciOverDmiError", |
| { |
| "Indicates that Intel ME is unable to communicate " |
| "using PECI over DMI.", |
| "Intel ME has detected PECI over DMI interface failure " |
| "and it is not functional any more. It may indicate the " |
| "situation when PECI over DMI was not configured by " |
| "BIOS or a defect which may require a CPU Host reset to " |
| "recover from. Details: %1", |
| "Critical", |
| 1, |
| {"string"}, |
| "Recovery via CPU Host reset or platform reset. If error is " |
| "persistent, deep-dive platform-level debugging is required.", |
| }}, |
| MessageEntry{ |
| "MEPttHealthEvent", |
| { |
| "Indicates that Intel ME has encountered issue with Intel PTT", |
| "Intel ME has detected following issue with Intel PTT: %1", |
| "Warning", |
| 1, |
| {"string"}, |
| "None.", |
| }}, |
| MessageEntry{ |
| "MERecoveryGpioForced", |
| { |
| "Indicates that Intel ME image is booted in " |
| "recovery mode due to GPIO assertion.", |
| "Intel ME Recovery Image loaded due to recovery MGPIO " |
| "pin asserted. Pin number is configurable in factory " |
| "presets, Default recovery pin is MGPIO1.", |
| "OK", |
| 0, |
| {}, |
| "Deassert recovery GPIO and reset the Intel ME back to " |
| "operational mode. If Recovery Jumper is in legacy behavior, " |
| "a ME reset (eg. Cold Reset IPMI cmd) is needed to have ME " |
| "back in operational mode.", |
| }}, |
| MessageEntry{"MERestrictedMode", |
| { |
| "Indicates events related to Intel ME restricted mode.", |
| "Intel ME restricted mode information: %1", |
| "Critical", |
| 1, |
| {"string"}, |
| "None.", |
| }}, |
| MessageEntry{ |
| "MESmbusLinkFailure", |
| { |
| "Indicate that Intel ME encountered SMBus link error.", |
| "Intel ME has detected SMBus link error. " |
| "Sensor Bus: %1 , MUX Address: %2 ", |
| "Critical", |
| 2, |
| {"string", "string"}, |
| "Devices connected to given SMLINK might cause communication " |
| "corruption. See error code and refer to Intel ME External " |
| "Interfaces Specification for details.", |
| }}, |
| MessageEntry{ |
| "MEUmaError", |
| { |
| "Indicates that Intel ME has encountered UMA operation error.", |
| "Intel ME has encountered UMA operation error. Details: %1", |
| "Critical", |
| 1, |
| {"string"}, |
| "Platform reset when UMA not configured correctly, or when " |
| "error occurred during normal operation on correctly " |
| "configured UMA multiple times leading to Intel ME entering " |
| "Recovery or restricted operational mode.", |
| }}, |
| MessageEntry{"MEUnsupportedFeature", |
| { |
| "Indicates that Intel ME is configuration with " |
| "feature which is not supported on this platform.", |
| "Feature not supported in current segment detected by " |
| "Intel ME Firmware. Details: %1", |
| "Critical", |
| 1, |
| {"string"}, |
| "Proper FW configuration must be updated or use the " |
| "Flash device with proper FW configuration", |
| }}, |
| MessageEntry{"MirroringRedundancyDegraded", |
| { |
| "Indicates the mirroring redundancy state is degraded.", |
| "Mirroring redundancy state degraded. Socket=%1 " |
| "Channel=%2 DIMM=%3 Pair=%4 Rank=%5.", |
| "Warning", |
| 5, |
| |
| { |
| "number", |
| "string", |
| "number", |
| "number", |
| "number", |
| }, |
| "None.", |
| }}, |
| MessageEntry{ |
| "MirroringRedundancyFull", |
| { |
| "Indicates the mirroring redundancy state is fully redundant.", |
| "Mirroring redundancy state fully redundant. Socket=%1 " |
| "Channel=%2 DIMM=%3 Pair=%4 Rank=%5.", |
| "OK", |
| 5, |
| |
| { |
| "number", |
| "string", |
| "number", |
| "number", |
| "number", |
| }, |
| "None.", |
| }}, |
| MessageEntry{"NMIButtonPressed", |
| { |
| "Indicates that the NMI button was pressed.", |
| "NMI Button Pressed.", |
| "Critical", |
| 0, |
| {}, |
| "None.", |
| }}, |
| MessageEntry{"NMIDiagnosticInterrupt", |
| { |
| "Indicates that an NMI Diagnostic " |
| "Interrupt has been generated.", |
| "NMI Diagnostic Interrupt.", |
| "Critical", |
| 0, |
| {}, |
| "None.", |
| }}, |
| MessageEntry{"PCIeCorrectableAdvisoryNonFatal", |
| { |
| "Indicates a PCIe Correctable Advisory Non-fatal Error.", |
| "PCIe Correctable Advisory Non-fatal Error. Bus=%1 " |
| "Device=%2 Function=%3.", |
| "Warning", |
| 3, |
| |
| { |
| "number", |
| "number", |
| "number", |
| }, |
| "None.", |
| }}, |
| MessageEntry{"PCIeCorrectableBadDLLP", |
| { |
| "Indicates a PCIe Correctable Bad DLLP Error.", |
| |
| "PCIe Correctable Bad DLLP. Bus=%1 Device=%2 Function=%3.", |
| "Warning", |
| 3, |
| |
| { |
| "number", |
| "number", |
| "number", |
| }, |
| "None.", |
| }}, |
| MessageEntry{"PCIeCorrectableBadTLP", |
| { |
| "Indicates a PCIe Correctable Bad TLP Error.", |
| |
| "PCIe Correctable Bad TLP. Bus=%1 Device=%2 Function=%3.", |
| "Warning", |
| 3, |
| |
| { |
| "number", |
| "number", |
| "number", |
| }, |
| "None.", |
| }}, |
| MessageEntry{"PCIeCorrectableHeaderLogOverflow", |
| { |
| "Indicates a PCIe Correctable Header Log Overflow Error.", |
| "PCIe Correctable Header Log Overflow. Bus=%1 Device=%2 " |
| "Function=%3.", |
| "Warning", |
| 3, |
| |
| { |
| "number", |
| "number", |
| "number", |
| }, |
| "None.", |
| }}, |
| MessageEntry{"PCIeCorrectableInternal", |
| { |
| "Indicates a PCIe Correctable Internal Error.", |
| "PCIe Correctable Internal Error. Bus=%1 Device=%2 " |
| "Function=%3.", |
| "Warning", |
| 3, |
| |
| { |
| "number", |
| "number", |
| "number", |
| }, |
| "None.", |
| }}, |
| MessageEntry{"PCIeCorrectableLinkBWChanged", |
| { |
| "Indicates a PCIe Correctable Link BW Changed Error.", |
| "PCIe Correctable Link BW Changed. Bus=%1 " |
| "Device=%2 Function=%3.", |
| "Warning", |
| 3, |
| |
| { |
| "number", |
| "number", |
| "number", |
| }, |
| "None.", |
| }}, |
| MessageEntry{"PCIeCorrectableReceiverError", |
| { |
| "Indicates a PCIe Correctable Receiver Error.", |
| "PCIe Correctable Receiver Error. Bus=%1 Device=%2 " |
| "Function=%3.", |
| "Warning", |
| 3, |
| |
| { |
| "number", |
| "number", |
| "number", |
| }, |
| "None.", |
| }}, |
| MessageEntry{"PCIeCorrectableReplayNumRollover", |
| { |
| "Indicates a PCIe Correctable Replay Num Rollover.", |
| "PCIe Correctable Replay Num Rollover. Bus=%1 Device=%2 " |
| "Function=%3.", |
| "Warning", |
| 3, |
| |
| { |
| "number", |
| "number", |
| "number", |
| }, |
| "None.", |
| }}, |
| MessageEntry{"PCIeCorrectableReplayTimerTimeout", |
| { |
| "Indicates a PCIe Correctable Replay Timer Timeout.", |
| "PCIe Correctable Replay Timer Timeout. Bus=%1 " |
| "Device=%2 Function=%3.", |
| "Warning", |
| 3, |
| |
| { |
| "number", |
| "number", |
| "number", |
| }, |
| "None.", |
| }}, |
| MessageEntry{"PCIeCorrectableUnspecifiedAERError", |
| { |
| "Indicates a PCIe Correctable Unspecified AER Error.", |
| "PCIe Correctable Unspecified AER Error. " |
| "Bus=%1 Device=%2 Function=%3.", |
| "Warning", |
| 3, |
| |
| { |
| "number", |
| "number", |
| "number", |
| }, |
| "None.", |
| }}, |
| MessageEntry{"PCIeFatalACSViolation", |
| { |
| "Indicates a PCIe ACS Violation Error.", |
| |
| "PCIe Fatal ACS Violation. Bus=%1 Device=%2 Function=%3.", |
| "Critical", |
| 3, |
| |
| { |
| "number", |
| "number", |
| "number", |
| }, |
| "None.", |
| }}, |
| MessageEntry{"PCIeFatalAtomicEgressBlocked", |
| { |
| "Indicates a PCIe Atomic Egress Blocked Error.", |
| "PCIe Fatal Atomic Egress Blocked. Bus=%1 Device=%2 " |
| "Function=%3.", |
| "Critical", |
| 3, |
| |
| { |
| "number", |
| "number", |
| "number", |
| }, |
| "None.", |
| }}, |
| MessageEntry{ |
| "PCIeFatalCompleterAbort", |
| { |
| "Indicates a PCIe Completer Abort Error.", |
| |
| "PCIe Fatal Completer Abort. Bus=%1 Device=%2 Function=%3.", |
| "Critical", |
| 3, |
| |
| { |
| "number", |
| "number", |
| "number", |
| }, |
| "None.", |
| }}, |
| MessageEntry{ |
| "PCIeFatalCompletionTimeout", |
| { |
| "Indicates a PCIe Completion Timeout Error.", |
| |
| "PCIe Fatal Completion Timeout. Bus=%1 Device=%2 Function=%3.", |
| "Critical", |
| 3, |
| |
| { |
| "number", |
| "number", |
| "number", |
| }, |
| "None.", |
| }}, |
| MessageEntry{ |
| "PCIeFatalDataLinkLayerProtocol", |
| { |
| "Indicates a PCIe Data Link Layer Protocol Error.", |
| |
| "PCIe Fatal Data Link Layer Protocol Error. Bus=%1 Device=%2 " |
| "Function=%3.", |
| "Critical", |
| 3, |
| |
| { |
| "number", |
| "number", |
| "number", |
| }, |
| "None.", |
| }}, |
| MessageEntry{"PCIeFatalECRCError", |
| { |
| "Indicates a PCIe ECRC Error.", |
| "PCIe Fatal ECRC Error. Bus=%1 Device=%2 Function=%3.", |
| "Critical", |
| 3, |
| |
| { |
| "number", |
| "number", |
| "number", |
| }, |
| "None.", |
| }}, |
| MessageEntry{"PCIeFatalFlowControlProtocol", |
| { |
| "Indicates a PCIe Flow Control Protocol Error.", |
| |
| "PCIe Fatal Flow Control Protocol Error. Bus=%1 Device=%2 " |
| "Function=%3.", |
| "Critical", |
| 3, |
| |
| { |
| "number", |
| "number", |
| "number", |
| }, |
| "None.", |
| }}, |
| MessageEntry{ |
| "PCIeFatalMalformedTLP", |
| { |
| "Indicates a PCIe Malformed TLP Error.", |
| |
| "PCIe Fatal Malformed TLP Error. Bus=%1 Device=%2 Function=%3.", |
| "Critical", |
| 3, |
| |
| { |
| "number", |
| "number", |
| "number", |
| }, |
| "None.", |
| }}, |
| MessageEntry{"PCIeFatalMCBlockedTLP", |
| { |
| "Indicates a PCIe MC Blocked TLP Error.", |
| "PCIe Fatal MC Blocked TLP Error. Bus=%1 " |
| "Device=%2 Function=%3.", |
| "Critical", |
| 3, |
| |
| { |
| "number", |
| "number", |
| "number", |
| }, |
| "None.", |
| }}, |
| MessageEntry{ |
| "PCIeFatalPoisonedTLP", |
| { |
| "Indicates a PCIe Poisoned TLP Error.", |
| |
| "PCIe Fatal Poisoned TLP Error. Bus=%1 Device=%2 Function=%3.", |
| "Critical", |
| 3, |
| |
| { |
| "number", |
| "number", |
| "number", |
| }, |
| "None.", |
| }}, |
| MessageEntry{"PCIeFatalReceiverBufferOverflow", |
| { |
| "Indicates a PCIe Receiver Buffer Overflow Error.", |
| "PCIe Fatal Receiver Buffer Overflow. Bus=%1 Device=%2 " |
| "Function=%3.", |
| "Critical", |
| 3, |
| |
| { |
| "number", |
| "number", |
| "number", |
| }, |
| "None.", |
| }}, |
| MessageEntry{ |
| "PCIeFatalReceivedErrNonFatalMessage", |
| { |
| "Indicates a PCIe Received ERR_NONFATAL Message Error.", |
| |
| "PCIe Fatal Received ERR_NONFATAL Message. Bus=%1 Device=%2 " |
| "Function=%3.", |
| "Critical", |
| 3, |
| |
| { |
| "number", |
| "number", |
| "number", |
| }, |
| "None.", |
| }}, |
| MessageEntry{"PCIeFatalReceivedFatalMessageFromDownstream", |
| { |
| "Indicates a PCIe Received Fatal Message " |
| "From Downstream Error.", |
| |
| "PCIe Fatal Received Fatal Message From Downstream. " |
| "Bus=%1 Device=%2 Function=%3.", |
| "Critical", |
| 3, |
| |
| { |
| "number", |
| "number", |
| "number", |
| }, |
| "None.", |
| }}, |
| MessageEntry{"PCIeFatalSurpriseLinkDown", |
| { |
| "Indicates a PCIe Surprise Link Down Error.", |
| "PCIe Fatal Surprise Link Down Error. Bus=%1 Device=%2 " |
| "Function=%3.", |
| "Critical", |
| 3, |
| |
| { |
| "number", |
| "number", |
| "number", |
| }, |
| "None.", |
| }}, |
| MessageEntry{"PCIeFatalTLPPrefixBlocked", |
| { |
| "Indicates a PCIe TLP Prefix Blocked Error.", |
| "PCIe Fatal TLP Prefix Blocked Error. Bus=%1 Device=%2 " |
| "Function=%3.", |
| "Critical", |
| 3, |
| |
| { |
| "number", |
| "number", |
| "number", |
| }, |
| "None.", |
| }}, |
| MessageEntry{ |
| "PCIeFatalUncorrectableInternal", |
| { |
| "Indicates a PCIe Uncorrectable Internal Error.", |
| |
| "PCIe Fatal Uncorrectable Internal Error. Bus=%1 Device=%2 " |
| "Function=%3.", |
| "Critical", |
| 3, |
| |
| { |
| "number", |
| "number", |
| "number", |
| }, |
| "None.", |
| }}, |
| MessageEntry{"PCIeFatalUnexpectedCompletion", |
| { |
| "Indicates a PCIe Unexpected Completion Error.", |
| "PCIe Fatal Unexpected Completion. Bus=%1 Device=%2 " |
| "Function=%3.", |
| "Critical", |
| 3, |
| |
| { |
| "number", |
| "number", |
| "number", |
| }, |
| "None.", |
| }}, |
| MessageEntry{"PCIeFatalUnspecifiedNonAERFatalError", |
| { |
| "Indicates a PCIe Unspecified Non-AER Fatal Error.", |
| "PCIe Fatal Unspecified Non-AER Fatal Error. Bus=%1 " |
| "Device=%2 Function=%3.", |
| "Critical", |
| 3, |
| |
| { |
| "number", |
| "number", |
| "number", |
| }, |
| "None.", |
| }}, |
| MessageEntry{ |
| "PCIeFatalUnsupportedRequest", |
| { |
| "Indicates a PCIe Unsupported Request Error.", |
| |
| "PCIe Fatal Unsupported Request. Bus=%1 Device=%2 Function=%3.", |
| "Critical", |
| 3, |
| |
| { |
| "number", |
| "number", |
| "number", |
| }, |
| "None.", |
| }}, |
| MessageEntry{"PowerButtonPressed", |
| { |
| "Indicates that the power button was pressed.", |
| "Power Button Pressed.", |
| "OK", |
| 0, |
| {}, |
| "None.", |
| }}, |
| MessageEntry{"PowerRestorePolicyApplied", |
| { |
| "Indicates that power was restored and the " |
| "BMC has applied the restore policy.", |
| "Power restore policy applied.", |
| "OK", |
| 0, |
| {}, |
| "None.", |
| }}, |
| MessageEntry{"PowerSupplyConfigurationError", |
| { |
| "Indicates an error in power supply configuration.", |
| "Power supply %1 configuration error.", |
| "Warning", |
| 1, |
| {"string"}, |
| "None.", |
| }}, |
| MessageEntry{ |
| "PowerSupplyConfigurationErrorRecovered", |
| { |
| "Indicates that power supply configuration error recovered " |
| "from a failure.", |
| "Power supply %1 configuration error recovered.", |
| "OK", |
| 1, |
| {"string"}, |
| "None.", |
| }}, |
| MessageEntry{ |
| "PowerSupplyFanFailed", |
| { |
| "Indicates that the specified power supply fan has failed.", |
| "Power supply %1 fan %2 failed.", |
| "Warning", |
| 2, |
| {"string", "string"}, |
| "None.", |
| }}, |
| MessageEntry{ |
| "PowerSupplyFanRecovered", |
| { |
| "Indicates that the power supply fan recovered from a failure.", |
| "Power supply %1 fan %2 recovered.", |
| "OK", |
| 2, |
| {"string", "string"}, |
| "None.", |
| }}, |
| MessageEntry{"PowerSupplyFailed", |
| { |
| "Indicates that a power supply has failed.", |
| "Power supply %1 failed.", |
| "Warning", |
| 1, |
| {"string"}, |
| "None.", |
| }}, |
| MessageEntry{"PowerSupplyFailurePredicted", |
| { |
| "Indicates that a power supply is predicted to fail.", |
| "Power supply %1 failure predicted.", |
| "Warning", |
| 1, |
| {"string"}, |
| "None.", |
| }}, |
| MessageEntry{"PowerSupplyInserted", |
| { |
| "Indicates that a power supply has been inserted.", |
| "Power supply %1 inserted.", |
| "OK", |
| 1, |
| {"string"}, |
| "None.", |
| }}, |
| MessageEntry{"PowerSupplyPowerGoodFailed", |
| { |
| "Indicates that the power supply power good signal " |
| "failed to assert within the specified time.", |
| "Power supply power good failed to assert within %1 " |
| "milliseconds.", |
| "Critical", |
| 1, |
| {"number"}, |
| "None.", |
| }}, |
| MessageEntry{"PowerSupplyPowerLost", |
| { |
| "Indicates that a power supply has lost input power.", |
| "Power supply %1 power lost.", |
| "Warning", |
| 1, |
| {"string"}, |
| "None.", |
| }}, |
| MessageEntry{"PowerSupplyPowerRestored", |
| { |
| "Indicates that a power supply input power was restored.", |
| "Power supply %1 power restored.", |
| "OK", |
| 0, |
| {"string"}, |
| "None.", |
| }}, |
| MessageEntry{"PowerSupplyPredictedFailureRecovered", |
| { |
| "Indicates that a power supply recovered " |
| "from a predicted failure.", |
| "Power supply %1 predicted failure recovered.", |
| "OK", |
| 1, |
| {"string"}, |
| "None.", |
| }}, |
| MessageEntry{"PowerSupplyRecovered", |
| { |
| "Indicates that a power supply recovered from a failure.", |
| "Power supply %1 recovered.", |
| "OK", |
| 1, |
| {"string"}, |
| "None.", |
| }}, |
| MessageEntry{"PowerSupplyRemoved", |
| { |
| "Indicates that a power supply has been removed.", |
| "Power supply %1 removed.", |
| "Warning", |
| 1, |
| {"string"}, |
| "None.", |
| }}, |
| MessageEntry{"PowerUnitDegradedFromNonRedundant", |
| { |
| "Indicates that power unit is come back to redundant from" |
| "nonredundant but is still not in full redundancy mode.", |
| "Power Unit degraded from nonredundant.", |
| "Warning", |
| 0, |
| {}, |
| "None.", |
| }}, |
| MessageEntry{"PowerUnitDegradedFromRedundant", |
| { |
| "Indicates that power unit is degarded from full " |
| "redundancy mode.", |
| "Power Unit degraded from redundant.", |
| "Warning", |
| 0, |
| {}, |
| "None.", |
| }}, |
| MessageEntry{"PowerUnitRedundancyDegraded", |
| { |
| "Indicates that power unit redundancy has been degraded.", |
| "Power Unit Redundancy degraded.", |
| "Warning", |
| 0, |
| {}, |
| "None.", |
| }}, |
| MessageEntry{ |
| "PowerUnitNonRedundantFromInsufficient", |
| { |
| "Indicates that power unit is not in redundancy mode and get" |
| "sufficient power to support redundancy from insufficient" |
| "power.", |
| |
| "Power Unit NonRedundant from insufficient to sufficient.", |
| "Warning", |
| 0, |
| {}, |
| "None.", |
| }}, |
| MessageEntry{"PowerUnitNonRedundantInsufficient", |
| { |
| "Indicates that power unit do not have sufficient " |
| "power to support redundancy.", |
| "Power Unit NonRedundant and has insufficient resource.", |
| "Critical", |
| 0, |
| {}, |
| "None.", |
| }}, |
| MessageEntry{"PowerUnitRedundancyLost", |
| { |
| "Indicates that power unit redundancy has been lost.", |
| "Power Unit Redundancy lost.", |
| "Warning", |
| 0, |
| {}, |
| "None.", |
| }}, |
| MessageEntry{ |
| "PowerUnitRedundancyRegained", |
| { |
| "Indicates that power unit full redundancy has been regained.", |
| "Power Unit Redundancy regained.", |
| "OK", |
| 0, |
| {}, |
| "None.", |
| }}, |
| MessageEntry{ |
| "PowerUnitNonRedundantSufficient", |
| { |
| "Indicates that power unit is not in redundancy mode but still" |
| "has sufficient power to support redundancy.", |
| "Power Unit Nonredundant but has sufficient resource.", |
| "Warning", |
| 0, |
| {}, |
| "None.", |
| }}, |
| MessageEntry{"ResetButtonPressed", |
| { |
| "Indicates that the reset button was pressed.", |
| "Reset Button Pressed.", |
| "OK", |
| 0, |
| {}, |
| "None.", |
| }}, |
| MessageEntry{"SecurityBoot2ndFlashEnabled", |
| { |
| "Indicates that the BMC 2nd boot flash is enabled.", |
| "BMC 2nd boot flash is enabled.", |
| "Critical", |
| 0, |
| {}, |
| "None.", |
| }}, |
| MessageEntry{"SecurityP2aBridgeEnabled", |
| { |
| "Indicates that the P2A bridge is enabled.", |
| "P2A(PCIe to AHB) bridge is enabled.", |
| "Critical", |
| 0, |
| {}, |
| "None.", |
| }}, |
| MessageEntry{"SecurityUartPortDebugEnabled", |
| { |
| "Indicates that the uart port debug is enabled.", |
| "Uart port debug is enabled.", |
| "Critical", |
| 0, |
| {}, |
| "None.", |
| }}, |
| MessageEntry{ |
| "SecurityUserStrongHashAlgoRestored", |
| { |
| "Indicates that password computing hash algorithm changed.", |
| "Password computing hash algorithm is changed to sha256/sha512.", |
| "OK", |
| 0, |
| {}, |
| "None.", |
| }}, |
| |
| MessageEntry{"SecurityUserNonRootUidZeroAssigned", |
| { |
| "Indicates that non root user assigned with user ID zero.", |
| "User ID Zero is assigned with non-root user.", |
| "Critical", |
| 0, |
| {}, |
| "None.", |
| }}, |
| MessageEntry{"SecurityUserNonRootUidZeroRemoved", |
| { |
| "Indicates that non root user ID is removed", |
| "Non root user assigned with user ID zero is removed.", |
| "OK", |
| 0, |
| {}, |
| "None.", |
| }}, |
| |
| MessageEntry{"SecurityUserRootEnabled", |
| { |
| "Indicates that system root user is enabled.", |
| "User root is enabled.", |
| "Critical", |
| 0, |
| {}, |
| "None.", |
| }}, |
| MessageEntry{"SecurityUserRootDisabled", |
| { |
| "Indicates that system root user is disabled.", |
| "User root is disabled.", |
| "OK", |
| 0, |
| {}, |
| "None.", |
| }}, |
| |
| MessageEntry{"SecurityUserUnsupportedShellEnabled", |
| { |
| "Indicates that unsupported shell is enabled.", |
| "Unsupported shell is enabled.", |
| "Critical", |
| 0, |
| {}, |
| "None.", |
| }}, |
| MessageEntry{"SecurityUserUnsupportedShellRemoved", |
| { |
| "Indicates that unsupported shell is removed.", |
| "Unsupported shell is removed.", |
| "OK", |
| 0, |
| {}, |
| "None.", |
| }}, |
| |
| MessageEntry{ |
| "SecurityUserWeakHashAlgoEnabled", |
| { |
| "Indicates that weak password computing hash algorithm is enabled.", |
| "Weak password computing hash algorithm is enabled.", |
| "Critical", |
| 0, |
| {}, |
| "None.", |
| }}, |
| MessageEntry{"SELEntryAdded", |
| { |
| "Indicates a SEL entry was added using the " |
| "Add SEL Entry or Platform Event command.", |
| "SEL Entry Added: %1", |
| "OK", |
| 1, |
| { |
| "string", |
| }, |
| "None.", |
| }}, |
| MessageEntry{"SensorThresholdCriticalHighGoingHigh", |
| { |
| "Indicates that a threshold sensor has crossed a " |
| "critical high threshold going high.", |
| "%1 sensor crossed a critical high threshold going " |
| "high. Reading=%2 Threshold=%3.", |
| "Critical", |
| 3, |
| {"string", "number", "number"}, |
| "Check the sensor or subsystem for errors.", |
| }}, |
| MessageEntry{"SensorThresholdCriticalHighGoingLow", |
| { |
| "Indicates that a threshold sensor has crossed a " |
| "critical high threshold going low.", |
| "%1 sensor crossed a critical high threshold going low. " |
| "Reading=%2 Threshold=%3.", |
| "OK", |
| 3, |
| {"string", "number", "number"}, |
| "None.", |
| }}, |
| MessageEntry{"SensorThresholdCriticalLowGoingHigh", |
| { |
| "Indicates that a threshold sensor has crossed a " |
| "critical low threshold going high.", |
| "%1 sensor crossed a critical low threshold going high. " |
| "Reading=%2 Threshold=%3.", |
| "OK", |
| 3, |
| {"string", "number", "number"}, |
| "None.", |
| }}, |
| MessageEntry{"SensorThresholdCriticalLowGoingLow", |
| { |
| "Indicates that a threshold sensor has crossed a " |
| "critical low threshold going low.", |
| "%1 sensor crossed a critical low threshold going low. " |
| "Reading=%2 Threshold=%3.", |
| "Critical", |
| 3, |
| {"string", "number", "number"}, |
| "Check the sensor or subsystem for errors.", |
| }}, |
| MessageEntry{"SensorThresholdWarningHighGoingHigh", |
| { |
| "Indicates that a threshold sensor has crossed a " |
| "warning high threshold going high.", |
| "%1 sensor crossed a warning high threshold going high. " |
| "Reading=%2 Threshold=%3.", |
| "Warning", |
| 3, |
| {"string", "number", "number"}, |
| "Check the sensor or subsystem for errors.", |
| }}, |
| MessageEntry{"SensorThresholdWarningHighGoingLow", |
| { |
| "Indicates that a threshold sensor has crossed a " |
| "warning high threshold going low.", |
| "%1 sensor crossed a warning high threshold going low. " |
| "Reading=%2 Threshold=%3.", |
| "OK", |
| 3, |
| {"string", "number", "number"}, |
| "None.", |
| }}, |
| MessageEntry{"SensorThresholdWarningLowGoingHigh", |
| { |
| "Indicates that a threshold sensor has crossed a " |
| "warning low threshold going high.", |
| "%1 sensor crossed a warning low threshold going high. " |
| "Reading=%2 Threshold=%3.", |
| "OK", |
| 3, |
| {"string", "number", "number"}, |
| "None.", |
| }}, |
| MessageEntry{"SensorThresholdWarningLowGoingLow", |
| { |
| "Indicates that a threshold sensor has crossed a " |
| "warning low threshold going low.", |
| "%1 sensor crossed a warning low threshold going low. " |
| "Reading=%2 Threshold=%3.", |
| "Warning", |
| 3, |
| {"string", "number", "number"}, |
| "Check the sensor or subsystem for errors.", |
| }}, |
| MessageEntry{"ServiceFailure", |
| { |
| "Indicates that a service has exited unsuccessfully.", |
| "Service %1 has exited unsuccessfully.", |
| "Warning", |
| 1, |
| {"string"}, |
| "None.", |
| }}, |
| MessageEntry{"ServiceStarted", |
| { |
| "Indicates that a service has started successfully.", |
| "Service %1 has started successfully.", |
| "OK", |
| 1, |
| {"string"}, |
| "None.", |
| }}, |
| MessageEntry{"SparingRedundancyDegraded", |
| { |
| "Indicates the sparing redundancy state is degraded.", |
| "Sparing redundancy state degraded. Socket=%1 " |
| "Channel=%2 DIMM=%3 Domain=%4 Rank=%5.", |
| "Warning", |
| 5, |
| |
| { |
| "number", |
| "string", |
| "number", |
| "string", |
| "number", |
| }, |
| "None.", |
| }}, |
| MessageEntry{ |
| "SparingRedundancyFull", |
| { |
| "Indicates the sparing redundancy state is fully redundant.", |
| "Sparing redundancy state fully redundant. Socket=%1 " |
| "Channel=%2 DIMM=%3 Domain=%4 Rank=%5.", |
| "OK", |
| 5, |
| |
| { |
| "number", |
| "string", |
| "number", |
| "string", |
| "number", |
| }, |
| "None.", |
| }}, |
| MessageEntry{"SsbThermalTrip", |
| { |
| "Indicates that an SSB Thermal trip has been asserted.", |
| "SSB Thermal trip.", |
| "Critical", |
| 0, |
| {}, |
| "None.", |
| }}, |
| MessageEntry{"SystemInterfaceDisabledProvisioned", |
| { |
| "Indicates that the system interface is in the disabled " |
| "provisioned state. All commands are blocked to execute " |
| "through the system interface.", |
| "The system interface is in the disabled provisioned " |
| "state.", |
| "OK", |
| 0, |
| {}, |
| "None.", |
| }}, |
| MessageEntry{"SystemInterfaceUnprovisioned", |
| { |
| "Indicates that the system interface is in the " |
| "unprovisioned state. All commands are permitted to " |
| "execute through the system interface.", |
| "The system interface is in the unprovisioned state.", |
| "Critical", |
| 0, |
| {}, |
| "None.", |
| }}, |
| MessageEntry{"SystemInterfaceWhitelistProvisioned", |
| { |
| "Indicates that the system interface is in the whitelist " |
| "provisioned state. Only whitelisted commands " |
| "are permitted to execute through the system interface.", |
| "The system interface is in the whitelist provisioned " |
| "state.", |
| "Warning", |
| 0, |
| {}, |
| "None.", |
| }}, |
| MessageEntry{"SystemPowerGoodFailed", |
| { |
| "Indicates that the system power good signal failed " |
| "to assert within the specified time (VR failure).", |
| "System power good failed to assert within %1 " |
| "milliseconds (VR failure).", |
| "Critical", |
| 1, |
| {"number"}, |
| "None.", |
| }}, |
| MessageEntry{"SystemPowerLost", |
| { |
| "Indicates that power was lost while the " |
| "system was powered on.", |
| "System Power Lost.", |
| "Critical", |
| 0, |
| {}, |
| "None.", |
| }}, |
| MessageEntry{"SystemPowerOffFailed", |
| { |
| "Indicates that the system failed to power off.", |
| "System Power-Off Failed.", |
| "Critical", |
| 0, |
| {}, |
| "None.", |
| }}, |
| MessageEntry{"SystemPowerOnFailed", |
| { |
| "Indicates that the system failed to power on.", |
| "System Power-On Failed.", |
| "Critical", |
| 0, |
| {}, |
| "None.", |
| }}, |
| MessageEntry{ |
| "VoltageRegulatorOverheated", |
| { |
| "Indicates that the specified voltage regulator overheated.", |
| "%1 Voltage Regulator Overheated.", |
| "Critical", |
| 1, |
| {"string"}, |
| "None.", |
| }}, |
| }; |
| } // namespace redfish::registries::openbmc |
| // NOLINTEND |
