| // SPDX-License-Identifier: GPL-2.0-or-later | 
 | /* | 
 |  * SLIM core rproc driver | 
 |  * | 
 |  * Copyright (C) 2016 STMicroelectronics | 
 |  * | 
 |  * Author: Peter Griffin <peter.griffin@linaro.org> | 
 |  */ | 
 |  | 
 | #include <linux/clk.h> | 
 | #include <linux/err.h> | 
 | #include <linux/kernel.h> | 
 | #include <linux/module.h> | 
 | #include <linux/of.h> | 
 | #include <linux/platform_device.h> | 
 | #include <linux/remoteproc.h> | 
 | #include <linux/remoteproc/st_slim_rproc.h> | 
 | #include "remoteproc_internal.h" | 
 |  | 
 | /* SLIM core registers */ | 
 | #define SLIM_ID_OFST		0x0 | 
 | #define SLIM_VER_OFST		0x4 | 
 |  | 
 | #define SLIM_EN_OFST		0x8 | 
 | #define SLIM_EN_RUN			BIT(0) | 
 |  | 
 | #define SLIM_CLK_GATE_OFST	0xC | 
 | #define SLIM_CLK_GATE_DIS		BIT(0) | 
 | #define SLIM_CLK_GATE_RESET		BIT(2) | 
 |  | 
 | #define SLIM_SLIM_PC_OFST	0x20 | 
 |  | 
 | /* DMEM registers */ | 
 | #define SLIM_REV_ID_OFST	0x0 | 
 | #define SLIM_REV_ID_MIN_MASK		GENMASK(15, 8) | 
 | #define SLIM_REV_ID_MIN(id)		((id & SLIM_REV_ID_MIN_MASK) >> 8) | 
 | #define SLIM_REV_ID_MAJ_MASK		GENMASK(23, 16) | 
 | #define SLIM_REV_ID_MAJ(id)		((id & SLIM_REV_ID_MAJ_MASK) >> 16) | 
 |  | 
 |  | 
 | /* peripherals registers */ | 
 | #define SLIM_STBUS_SYNC_OFST	0xF88 | 
 | #define SLIM_STBUS_SYNC_DIS		BIT(0) | 
 |  | 
 | #define SLIM_INT_SET_OFST	0xFD4 | 
 | #define SLIM_INT_CLR_OFST	0xFD8 | 
 | #define SLIM_INT_MASK_OFST	0xFDC | 
 |  | 
 | #define SLIM_CMD_CLR_OFST	0xFC8 | 
 | #define SLIM_CMD_MASK_OFST	0xFCC | 
 |  | 
 | static const char *mem_names[ST_SLIM_MEM_MAX] = { | 
 | 	[ST_SLIM_DMEM]	= "dmem", | 
 | 	[ST_SLIM_IMEM]	= "imem", | 
 | }; | 
 |  | 
 | static int slim_clk_get(struct st_slim_rproc *slim_rproc, struct device *dev) | 
 | { | 
 | 	int clk, err; | 
 |  | 
 | 	for (clk = 0; clk < ST_SLIM_MAX_CLK; clk++) { | 
 | 		slim_rproc->clks[clk] = of_clk_get(dev->of_node, clk); | 
 | 		if (IS_ERR(slim_rproc->clks[clk])) { | 
 | 			err = PTR_ERR(slim_rproc->clks[clk]); | 
 | 			if (err == -EPROBE_DEFER) | 
 | 				goto err_put_clks; | 
 | 			slim_rproc->clks[clk] = NULL; | 
 | 			break; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	return 0; | 
 |  | 
 | err_put_clks: | 
 | 	while (--clk >= 0) | 
 | 		clk_put(slim_rproc->clks[clk]); | 
 |  | 
 | 	return err; | 
 | } | 
 |  | 
 | static void slim_clk_disable(struct st_slim_rproc *slim_rproc) | 
 | { | 
 | 	int clk; | 
 |  | 
 | 	for (clk = 0; clk < ST_SLIM_MAX_CLK && slim_rproc->clks[clk]; clk++) | 
 | 		clk_disable_unprepare(slim_rproc->clks[clk]); | 
 | } | 
 |  | 
 | static int slim_clk_enable(struct st_slim_rproc *slim_rproc) | 
 | { | 
 | 	int clk, ret; | 
 |  | 
 | 	for (clk = 0; clk < ST_SLIM_MAX_CLK && slim_rproc->clks[clk]; clk++) { | 
 | 		ret = clk_prepare_enable(slim_rproc->clks[clk]); | 
 | 		if (ret) | 
 | 			goto err_disable_clks; | 
 | 	} | 
 |  | 
 | 	return 0; | 
 |  | 
 | err_disable_clks: | 
 | 	while (--clk >= 0) | 
 | 		clk_disable_unprepare(slim_rproc->clks[clk]); | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | /* | 
 |  * Remoteproc slim specific device handlers | 
 |  */ | 
 | static int slim_rproc_start(struct rproc *rproc) | 
 | { | 
 | 	struct device *dev = &rproc->dev; | 
 | 	struct st_slim_rproc *slim_rproc = rproc->priv; | 
 | 	unsigned long hw_id, hw_ver, fw_rev; | 
 | 	u32 val; | 
 |  | 
 | 	/* disable CPU pipeline clock & reset CPU pipeline */ | 
 | 	val = SLIM_CLK_GATE_DIS | SLIM_CLK_GATE_RESET; | 
 | 	writel(val, slim_rproc->slimcore + SLIM_CLK_GATE_OFST); | 
 |  | 
 | 	/* disable SLIM core STBus sync */ | 
 | 	writel(SLIM_STBUS_SYNC_DIS, slim_rproc->peri + SLIM_STBUS_SYNC_OFST); | 
 |  | 
 | 	/* enable cpu pipeline clock */ | 
 | 	writel(!SLIM_CLK_GATE_DIS, | 
 | 		slim_rproc->slimcore + SLIM_CLK_GATE_OFST); | 
 |  | 
 | 	/* clear int & cmd mailbox */ | 
 | 	writel(~0U, slim_rproc->peri + SLIM_INT_CLR_OFST); | 
 | 	writel(~0U, slim_rproc->peri + SLIM_CMD_CLR_OFST); | 
 |  | 
 | 	/* enable all channels cmd & int */ | 
 | 	writel(~0U, slim_rproc->peri + SLIM_INT_MASK_OFST); | 
 | 	writel(~0U, slim_rproc->peri + SLIM_CMD_MASK_OFST); | 
 |  | 
 | 	/* enable cpu */ | 
 | 	writel(SLIM_EN_RUN, slim_rproc->slimcore + SLIM_EN_OFST); | 
 |  | 
 | 	hw_id = readl_relaxed(slim_rproc->slimcore + SLIM_ID_OFST); | 
 | 	hw_ver = readl_relaxed(slim_rproc->slimcore + SLIM_VER_OFST); | 
 |  | 
 | 	fw_rev = readl(slim_rproc->mem[ST_SLIM_DMEM].cpu_addr + | 
 | 			SLIM_REV_ID_OFST); | 
 |  | 
 | 	dev_info(dev, "fw rev:%ld.%ld on SLIM %ld.%ld\n", | 
 | 		 SLIM_REV_ID_MAJ(fw_rev), SLIM_REV_ID_MIN(fw_rev), | 
 | 		 hw_id, hw_ver); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int slim_rproc_stop(struct rproc *rproc) | 
 | { | 
 | 	struct st_slim_rproc *slim_rproc = rproc->priv; | 
 | 	u32 val; | 
 |  | 
 | 	/* mask all (cmd & int) channels */ | 
 | 	writel(0UL, slim_rproc->peri + SLIM_INT_MASK_OFST); | 
 | 	writel(0UL, slim_rproc->peri + SLIM_CMD_MASK_OFST); | 
 |  | 
 | 	/* disable cpu pipeline clock */ | 
 | 	writel(SLIM_CLK_GATE_DIS, slim_rproc->slimcore + SLIM_CLK_GATE_OFST); | 
 |  | 
 | 	writel(!SLIM_EN_RUN, slim_rproc->slimcore + SLIM_EN_OFST); | 
 |  | 
 | 	val = readl(slim_rproc->slimcore + SLIM_EN_OFST); | 
 | 	if (val & SLIM_EN_RUN) | 
 | 		dev_warn(&rproc->dev, "Failed to disable SLIM"); | 
 |  | 
 | 	dev_dbg(&rproc->dev, "slim stopped\n"); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void *slim_rproc_da_to_va(struct rproc *rproc, u64 da, size_t len, bool *is_iomem) | 
 | { | 
 | 	struct st_slim_rproc *slim_rproc = rproc->priv; | 
 | 	void *va = NULL; | 
 | 	int i; | 
 |  | 
 | 	for (i = 0; i < ST_SLIM_MEM_MAX; i++) { | 
 | 		if (da != slim_rproc->mem[i].bus_addr) | 
 | 			continue; | 
 |  | 
 | 		if (len <= slim_rproc->mem[i].size) { | 
 | 			/* __force to make sparse happy with type conversion */ | 
 | 			va = (__force void *)slim_rproc->mem[i].cpu_addr; | 
 | 			break; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	dev_dbg(&rproc->dev, "da = 0x%llx len = 0x%zx va = 0x%pK\n", | 
 | 		da, len, va); | 
 |  | 
 | 	return va; | 
 | } | 
 |  | 
 | static const struct rproc_ops slim_rproc_ops = { | 
 | 	.start		= slim_rproc_start, | 
 | 	.stop		= slim_rproc_stop, | 
 | 	.da_to_va       = slim_rproc_da_to_va, | 
 | 	.get_boot_addr	= rproc_elf_get_boot_addr, | 
 | 	.load		= rproc_elf_load_segments, | 
 | 	.sanity_check	= rproc_elf_sanity_check, | 
 | }; | 
 |  | 
 | /** | 
 |  * st_slim_rproc_alloc() - allocate and initialise slim rproc | 
 |  * @pdev: Pointer to the platform_device struct | 
 |  * @fw_name: Name of firmware for rproc to use | 
 |  * | 
 |  * Function for allocating and initialising a slim rproc for use by | 
 |  * device drivers whose IP is based around the SLIM core. It | 
 |  * obtains and enables any clocks required by the SLIM core and also | 
 |  * ioremaps the various IO. | 
 |  * | 
 |  * Return: st_slim_rproc pointer or PTR_ERR() on error. | 
 |  */ | 
 |  | 
 | struct st_slim_rproc *st_slim_rproc_alloc(struct platform_device *pdev, | 
 | 				char *fw_name) | 
 | { | 
 | 	struct device *dev = &pdev->dev; | 
 | 	struct st_slim_rproc *slim_rproc; | 
 | 	struct device_node *np = dev->of_node; | 
 | 	struct rproc *rproc; | 
 | 	struct resource *res; | 
 | 	int err, i; | 
 |  | 
 | 	if (!fw_name) | 
 | 		return ERR_PTR(-EINVAL); | 
 |  | 
 | 	if (!of_device_is_compatible(np, "st,slim-rproc")) | 
 | 		return ERR_PTR(-EINVAL); | 
 |  | 
 | 	rproc = rproc_alloc(dev, np->name, &slim_rproc_ops, | 
 | 			fw_name, sizeof(*slim_rproc)); | 
 | 	if (!rproc) | 
 | 		return ERR_PTR(-ENOMEM); | 
 |  | 
 | 	rproc->has_iommu = false; | 
 |  | 
 | 	slim_rproc = rproc->priv; | 
 | 	slim_rproc->rproc = rproc; | 
 |  | 
 | 	/* get imem and dmem */ | 
 | 	for (i = 0; i < ARRAY_SIZE(mem_names); i++) { | 
 | 		res = platform_get_resource_byname(pdev, IORESOURCE_MEM, | 
 | 						mem_names[i]); | 
 |  | 
 | 		slim_rproc->mem[i].cpu_addr = devm_ioremap_resource(dev, res); | 
 | 		if (IS_ERR(slim_rproc->mem[i].cpu_addr)) { | 
 | 			dev_err(&pdev->dev, "devm_ioremap_resource failed\n"); | 
 | 			err = PTR_ERR(slim_rproc->mem[i].cpu_addr); | 
 | 			goto err; | 
 | 		} | 
 | 		slim_rproc->mem[i].bus_addr = res->start; | 
 | 		slim_rproc->mem[i].size = resource_size(res); | 
 | 	} | 
 |  | 
 | 	slim_rproc->slimcore = devm_platform_ioremap_resource_byname(pdev, "slimcore"); | 
 | 	if (IS_ERR(slim_rproc->slimcore)) { | 
 | 		dev_err(&pdev->dev, "failed to ioremap slimcore IO\n"); | 
 | 		err = PTR_ERR(slim_rproc->slimcore); | 
 | 		goto err; | 
 | 	} | 
 |  | 
 | 	slim_rproc->peri = devm_platform_ioremap_resource_byname(pdev, "peripherals"); | 
 | 	if (IS_ERR(slim_rproc->peri)) { | 
 | 		dev_err(&pdev->dev, "failed to ioremap peripherals IO\n"); | 
 | 		err = PTR_ERR(slim_rproc->peri); | 
 | 		goto err; | 
 | 	} | 
 |  | 
 | 	err = slim_clk_get(slim_rproc, dev); | 
 | 	if (err) | 
 | 		goto err; | 
 |  | 
 | 	err = slim_clk_enable(slim_rproc); | 
 | 	if (err) { | 
 | 		dev_err(dev, "Failed to enable clocks\n"); | 
 | 		goto err_clk_put; | 
 | 	} | 
 |  | 
 | 	/* Register as a remoteproc device */ | 
 | 	err = rproc_add(rproc); | 
 | 	if (err) { | 
 | 		dev_err(dev, "registration of slim remoteproc failed\n"); | 
 | 		goto err_clk_dis; | 
 | 	} | 
 |  | 
 | 	return slim_rproc; | 
 |  | 
 | err_clk_dis: | 
 | 	slim_clk_disable(slim_rproc); | 
 | err_clk_put: | 
 | 	for (i = 0; i < ST_SLIM_MAX_CLK && slim_rproc->clks[i]; i++) | 
 | 		clk_put(slim_rproc->clks[i]); | 
 | err: | 
 | 	rproc_free(rproc); | 
 | 	return ERR_PTR(err); | 
 | } | 
 | EXPORT_SYMBOL(st_slim_rproc_alloc); | 
 |  | 
 | /** | 
 |   * st_slim_rproc_put() - put slim rproc resources | 
 |   * @slim_rproc: Pointer to the st_slim_rproc struct | 
 |   * | 
 |   * Function for calling respective _put() functions on slim_rproc resources. | 
 |   * | 
 |   */ | 
 | void st_slim_rproc_put(struct st_slim_rproc *slim_rproc) | 
 | { | 
 | 	int clk; | 
 |  | 
 | 	if (!slim_rproc) | 
 | 		return; | 
 |  | 
 | 	slim_clk_disable(slim_rproc); | 
 |  | 
 | 	for (clk = 0; clk < ST_SLIM_MAX_CLK && slim_rproc->clks[clk]; clk++) | 
 | 		clk_put(slim_rproc->clks[clk]); | 
 |  | 
 | 	rproc_del(slim_rproc->rproc); | 
 | 	rproc_free(slim_rproc->rproc); | 
 | } | 
 | EXPORT_SYMBOL(st_slim_rproc_put); | 
 |  | 
 | MODULE_AUTHOR("Peter Griffin <peter.griffin@linaro.org>"); | 
 | MODULE_DESCRIPTION("STMicroelectronics SLIM core rproc driver"); | 
 | MODULE_LICENSE("GPL v2"); |