| // SPDX-License-Identifier: GPL-2.0 | |
| /* | |
| * phy-can-transceiver.c - phy driver for CAN transceivers | |
| * | |
| * Copyright (C) 2021 Texas Instruments Incorporated - https://www.ti.com | |
| * | |
| */ | |
| #include <linux/of.h> | |
| #include <linux/phy/phy.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/module.h> | |
| #include <linux/gpio.h> | |
| #include <linux/gpio/consumer.h> | |
| #include <linux/mux/consumer.h> | |
| struct can_transceiver_data { | |
| u32 flags; | |
| #define CAN_TRANSCEIVER_STB_PRESENT BIT(0) | |
| #define CAN_TRANSCEIVER_EN_PRESENT BIT(1) | |
| }; | |
| struct can_transceiver_phy { | |
| struct phy *generic_phy; | |
| struct gpio_desc *standby_gpio; | |
| struct gpio_desc *enable_gpio; | |
| struct mux_state *mux_state; | |
| }; | |
| /* Power on function */ | |
| static int can_transceiver_phy_power_on(struct phy *phy) | |
| { | |
| struct can_transceiver_phy *can_transceiver_phy = phy_get_drvdata(phy); | |
| int ret; | |
| if (can_transceiver_phy->mux_state) { | |
| ret = mux_state_select(can_transceiver_phy->mux_state); | |
| if (ret) { | |
| dev_err(&phy->dev, "Failed to select CAN mux: %d\n", ret); | |
| return ret; | |
| } | |
| } | |
| if (can_transceiver_phy->standby_gpio) | |
| gpiod_set_value_cansleep(can_transceiver_phy->standby_gpio, 0); | |
| if (can_transceiver_phy->enable_gpio) | |
| gpiod_set_value_cansleep(can_transceiver_phy->enable_gpio, 1); | |
| return 0; | |
| } | |
| /* Power off function */ | |
| static int can_transceiver_phy_power_off(struct phy *phy) | |
| { | |
| struct can_transceiver_phy *can_transceiver_phy = phy_get_drvdata(phy); | |
| if (can_transceiver_phy->standby_gpio) | |
| gpiod_set_value_cansleep(can_transceiver_phy->standby_gpio, 1); | |
| if (can_transceiver_phy->enable_gpio) | |
| gpiod_set_value_cansleep(can_transceiver_phy->enable_gpio, 0); | |
| if (can_transceiver_phy->mux_state) | |
| mux_state_deselect(can_transceiver_phy->mux_state); | |
| return 0; | |
| } | |
| static const struct phy_ops can_transceiver_phy_ops = { | |
| .power_on = can_transceiver_phy_power_on, | |
| .power_off = can_transceiver_phy_power_off, | |
| .owner = THIS_MODULE, | |
| }; | |
| static const struct can_transceiver_data tcan1042_drvdata = { | |
| .flags = CAN_TRANSCEIVER_STB_PRESENT, | |
| }; | |
| static const struct can_transceiver_data tcan1043_drvdata = { | |
| .flags = CAN_TRANSCEIVER_STB_PRESENT | CAN_TRANSCEIVER_EN_PRESENT, | |
| }; | |
| static const struct of_device_id can_transceiver_phy_ids[] = { | |
| { | |
| .compatible = "ti,tcan1042", | |
| .data = &tcan1042_drvdata | |
| }, | |
| { | |
| .compatible = "ti,tcan1043", | |
| .data = &tcan1043_drvdata | |
| }, | |
| { | |
| .compatible = "nxp,tjr1443", | |
| .data = &tcan1043_drvdata | |
| }, | |
| { } | |
| }; | |
| MODULE_DEVICE_TABLE(of, can_transceiver_phy_ids); | |
| static int can_transceiver_phy_probe(struct platform_device *pdev) | |
| { | |
| struct phy_provider *phy_provider; | |
| struct device *dev = &pdev->dev; | |
| struct can_transceiver_phy *can_transceiver_phy; | |
| const struct can_transceiver_data *drvdata; | |
| const struct of_device_id *match; | |
| struct phy *phy; | |
| struct gpio_desc *standby_gpio; | |
| struct gpio_desc *enable_gpio; | |
| u32 max_bitrate = 0; | |
| int err; | |
| can_transceiver_phy = devm_kzalloc(dev, sizeof(struct can_transceiver_phy), GFP_KERNEL); | |
| if (!can_transceiver_phy) | |
| return -ENOMEM; | |
| match = of_match_node(can_transceiver_phy_ids, pdev->dev.of_node); | |
| drvdata = match->data; | |
| if (of_property_read_bool(dev->of_node, "mux-states")) { | |
| struct mux_state *mux_state; | |
| mux_state = devm_mux_state_get(dev, NULL); | |
| if (IS_ERR(mux_state)) | |
| return dev_err_probe(&pdev->dev, PTR_ERR(mux_state), | |
| "failed to get mux\n"); | |
| can_transceiver_phy->mux_state = mux_state; | |
| } | |
| phy = devm_phy_create(dev, dev->of_node, | |
| &can_transceiver_phy_ops); | |
| if (IS_ERR(phy)) { | |
| dev_err(dev, "failed to create can transceiver phy\n"); | |
| return PTR_ERR(phy); | |
| } | |
| err = device_property_read_u32(dev, "max-bitrate", &max_bitrate); | |
| if ((err != -EINVAL) && !max_bitrate) | |
| dev_warn(dev, "Invalid value for transceiver max bitrate. Ignoring bitrate limit\n"); | |
| phy->attrs.max_link_rate = max_bitrate; | |
| can_transceiver_phy->generic_phy = phy; | |
| if (drvdata->flags & CAN_TRANSCEIVER_STB_PRESENT) { | |
| standby_gpio = devm_gpiod_get_optional(dev, "standby", GPIOD_OUT_HIGH); | |
| if (IS_ERR(standby_gpio)) | |
| return PTR_ERR(standby_gpio); | |
| can_transceiver_phy->standby_gpio = standby_gpio; | |
| } | |
| if (drvdata->flags & CAN_TRANSCEIVER_EN_PRESENT) { | |
| enable_gpio = devm_gpiod_get_optional(dev, "enable", GPIOD_OUT_LOW); | |
| if (IS_ERR(enable_gpio)) | |
| return PTR_ERR(enable_gpio); | |
| can_transceiver_phy->enable_gpio = enable_gpio; | |
| } | |
| phy_set_drvdata(can_transceiver_phy->generic_phy, can_transceiver_phy); | |
| phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); | |
| return PTR_ERR_OR_ZERO(phy_provider); | |
| } | |
| static struct platform_driver can_transceiver_phy_driver = { | |
| .probe = can_transceiver_phy_probe, | |
| .driver = { | |
| .name = "can-transceiver-phy", | |
| .of_match_table = can_transceiver_phy_ids, | |
| }, | |
| }; | |
| module_platform_driver(can_transceiver_phy_driver); | |
| MODULE_AUTHOR("Faiz Abbas <faiz_abbas@ti.com>"); | |
| MODULE_AUTHOR("Aswath Govindraju <a-govindraju@ti.com>"); | |
| MODULE_DESCRIPTION("CAN TRANSCEIVER PHY driver"); | |
| MODULE_LICENSE("GPL v2"); |