| /* | |
| * Copyright (c) Yann Collet, Facebook, Inc. | |
| * All rights reserved. | |
| * | |
| * This source code is licensed under both the BSD-style license (found in the | |
| * LICENSE file in the root directory of this source tree) and the GPLv2 (found | |
| * in the COPYING file in the root directory of this source tree). | |
| * You may select, at your option, one of the above-listed licenses. | |
| */ | |
| /*-************************************* | |
| * Dependencies | |
| ***************************************/ | |
| #include "zstd_compress_superblock.h" | |
| #include "../common/zstd_internal.h" /* ZSTD_getSequenceLength */ | |
| #include "hist.h" /* HIST_countFast_wksp */ | |
| #include "zstd_compress_internal.h" /* ZSTD_[huf|fse|entropy]CTablesMetadata_t */ | |
| #include "zstd_compress_sequences.h" | |
| #include "zstd_compress_literals.h" | |
| /* ZSTD_compressSubBlock_literal() : | |
| * Compresses literals section for a sub-block. | |
| * When we have to write the Huffman table we will sometimes choose a header | |
| * size larger than necessary. This is because we have to pick the header size | |
| * before we know the table size + compressed size, so we have a bound on the | |
| * table size. If we guessed incorrectly, we fall back to uncompressed literals. | |
| * | |
| * We write the header when writeEntropy=1 and set entropyWritten=1 when we succeeded | |
| * in writing the header, otherwise it is set to 0. | |
| * | |
| * hufMetadata->hType has literals block type info. | |
| * If it is set_basic, all sub-blocks literals section will be Raw_Literals_Block. | |
| * If it is set_rle, all sub-blocks literals section will be RLE_Literals_Block. | |
| * If it is set_compressed, first sub-block's literals section will be Compressed_Literals_Block | |
| * If it is set_compressed, first sub-block's literals section will be Treeless_Literals_Block | |
| * and the following sub-blocks' literals sections will be Treeless_Literals_Block. | |
| * @return : compressed size of literals section of a sub-block | |
| * Or 0 if it unable to compress. | |
| * Or error code */ | |
| static size_t ZSTD_compressSubBlock_literal(const HUF_CElt* hufTable, | |
| const ZSTD_hufCTablesMetadata_t* hufMetadata, | |
| const BYTE* literals, size_t litSize, | |
| void* dst, size_t dstSize, | |
| const int bmi2, int writeEntropy, int* entropyWritten) | |
| { | |
| size_t const header = writeEntropy ? 200 : 0; | |
| size_t const lhSize = 3 + (litSize >= (1 KB - header)) + (litSize >= (16 KB - header)); | |
| BYTE* const ostart = (BYTE*)dst; | |
| BYTE* const oend = ostart + dstSize; | |
| BYTE* op = ostart + lhSize; | |
| U32 const singleStream = lhSize == 3; | |
| symbolEncodingType_e hType = writeEntropy ? hufMetadata->hType : set_repeat; | |
| size_t cLitSize = 0; | |
| (void)bmi2; /* TODO bmi2... */ | |
| DEBUGLOG(5, "ZSTD_compressSubBlock_literal (litSize=%zu, lhSize=%zu, writeEntropy=%d)", litSize, lhSize, writeEntropy); | |
| *entropyWritten = 0; | |
| if (litSize == 0 || hufMetadata->hType == set_basic) { | |
| DEBUGLOG(5, "ZSTD_compressSubBlock_literal using raw literal"); | |
| return ZSTD_noCompressLiterals(dst, dstSize, literals, litSize); | |
| } else if (hufMetadata->hType == set_rle) { | |
| DEBUGLOG(5, "ZSTD_compressSubBlock_literal using rle literal"); | |
| return ZSTD_compressRleLiteralsBlock(dst, dstSize, literals, litSize); | |
| } | |
| assert(litSize > 0); | |
| assert(hufMetadata->hType == set_compressed || hufMetadata->hType == set_repeat); | |
| if (writeEntropy && hufMetadata->hType == set_compressed) { | |
| ZSTD_memcpy(op, hufMetadata->hufDesBuffer, hufMetadata->hufDesSize); | |
| op += hufMetadata->hufDesSize; | |
| cLitSize += hufMetadata->hufDesSize; | |
| DEBUGLOG(5, "ZSTD_compressSubBlock_literal (hSize=%zu)", hufMetadata->hufDesSize); | |
| } | |
| /* TODO bmi2 */ | |
| { const size_t cSize = singleStream ? HUF_compress1X_usingCTable(op, oend-op, literals, litSize, hufTable) | |
| : HUF_compress4X_usingCTable(op, oend-op, literals, litSize, hufTable); | |
| op += cSize; | |
| cLitSize += cSize; | |
| if (cSize == 0 || ERR_isError(cSize)) { | |
| DEBUGLOG(5, "Failed to write entropy tables %s", ZSTD_getErrorName(cSize)); | |
| return 0; | |
| } | |
| /* If we expand and we aren't writing a header then emit uncompressed */ | |
| if (!writeEntropy && cLitSize >= litSize) { | |
| DEBUGLOG(5, "ZSTD_compressSubBlock_literal using raw literal because uncompressible"); | |
| return ZSTD_noCompressLiterals(dst, dstSize, literals, litSize); | |
| } | |
| /* If we are writing headers then allow expansion that doesn't change our header size. */ | |
| if (lhSize < (size_t)(3 + (cLitSize >= 1 KB) + (cLitSize >= 16 KB))) { | |
| assert(cLitSize > litSize); | |
| DEBUGLOG(5, "Literals expanded beyond allowed header size"); | |
| return ZSTD_noCompressLiterals(dst, dstSize, literals, litSize); | |
| } | |
| DEBUGLOG(5, "ZSTD_compressSubBlock_literal (cSize=%zu)", cSize); | |
| } | |
| /* Build header */ | |
| switch(lhSize) | |
| { | |
| case 3: /* 2 - 2 - 10 - 10 */ | |
| { U32 const lhc = hType + ((!singleStream) << 2) + ((U32)litSize<<4) + ((U32)cLitSize<<14); | |
| MEM_writeLE24(ostart, lhc); | |
| break; | |
| } | |
| case 4: /* 2 - 2 - 14 - 14 */ | |
| { U32 const lhc = hType + (2 << 2) + ((U32)litSize<<4) + ((U32)cLitSize<<18); | |
| MEM_writeLE32(ostart, lhc); | |
| break; | |
| } | |
| case 5: /* 2 - 2 - 18 - 18 */ | |
| { U32 const lhc = hType + (3 << 2) + ((U32)litSize<<4) + ((U32)cLitSize<<22); | |
| MEM_writeLE32(ostart, lhc); | |
| ostart[4] = (BYTE)(cLitSize >> 10); | |
| break; | |
| } | |
| default: /* not possible : lhSize is {3,4,5} */ | |
| assert(0); | |
| } | |
| *entropyWritten = 1; | |
| DEBUGLOG(5, "Compressed literals: %u -> %u", (U32)litSize, (U32)(op-ostart)); | |
| return op-ostart; | |
| } | |
| static size_t ZSTD_seqDecompressedSize(seqStore_t const* seqStore, const seqDef* sequences, size_t nbSeq, size_t litSize, int lastSequence) { | |
| const seqDef* const sstart = sequences; | |
| const seqDef* const send = sequences + nbSeq; | |
| const seqDef* sp = sstart; | |
| size_t matchLengthSum = 0; | |
| size_t litLengthSum = 0; | |
| (void)(litLengthSum); /* suppress unused variable warning on some environments */ | |
| while (send-sp > 0) { | |
| ZSTD_sequenceLength const seqLen = ZSTD_getSequenceLength(seqStore, sp); | |
| litLengthSum += seqLen.litLength; | |
| matchLengthSum += seqLen.matchLength; | |
| sp++; | |
| } | |
| assert(litLengthSum <= litSize); | |
| if (!lastSequence) { | |
| assert(litLengthSum == litSize); | |
| } | |
| return matchLengthSum + litSize; | |
| } | |
| /* ZSTD_compressSubBlock_sequences() : | |
| * Compresses sequences section for a sub-block. | |
| * fseMetadata->llType, fseMetadata->ofType, and fseMetadata->mlType have | |
| * symbol compression modes for the super-block. | |
| * The first successfully compressed block will have these in its header. | |
| * We set entropyWritten=1 when we succeed in compressing the sequences. | |
| * The following sub-blocks will always have repeat mode. | |
| * @return : compressed size of sequences section of a sub-block | |
| * Or 0 if it is unable to compress | |
| * Or error code. */ | |
| static size_t ZSTD_compressSubBlock_sequences(const ZSTD_fseCTables_t* fseTables, | |
| const ZSTD_fseCTablesMetadata_t* fseMetadata, | |
| const seqDef* sequences, size_t nbSeq, | |
| const BYTE* llCode, const BYTE* mlCode, const BYTE* ofCode, | |
| const ZSTD_CCtx_params* cctxParams, | |
| void* dst, size_t dstCapacity, | |
| const int bmi2, int writeEntropy, int* entropyWritten) | |
| { | |
| const int longOffsets = cctxParams->cParams.windowLog > STREAM_ACCUMULATOR_MIN; | |
| BYTE* const ostart = (BYTE*)dst; | |
| BYTE* const oend = ostart + dstCapacity; | |
| BYTE* op = ostart; | |
| BYTE* seqHead; | |
| DEBUGLOG(5, "ZSTD_compressSubBlock_sequences (nbSeq=%zu, writeEntropy=%d, longOffsets=%d)", nbSeq, writeEntropy, longOffsets); | |
| *entropyWritten = 0; | |
| /* Sequences Header */ | |
| RETURN_ERROR_IF((oend-op) < 3 /*max nbSeq Size*/ + 1 /*seqHead*/, | |
| dstSize_tooSmall, ""); | |
| if (nbSeq < 0x7F) | |
| *op++ = (BYTE)nbSeq; | |
| else if (nbSeq < LONGNBSEQ) | |
| op[0] = (BYTE)((nbSeq>>8) + 0x80), op[1] = (BYTE)nbSeq, op+=2; | |
| else | |
| op[0]=0xFF, MEM_writeLE16(op+1, (U16)(nbSeq - LONGNBSEQ)), op+=3; | |
| if (nbSeq==0) { | |
| return op - ostart; | |
| } | |
| /* seqHead : flags for FSE encoding type */ | |
| seqHead = op++; | |
| DEBUGLOG(5, "ZSTD_compressSubBlock_sequences (seqHeadSize=%u)", (unsigned)(op-ostart)); | |
| if (writeEntropy) { | |
| const U32 LLtype = fseMetadata->llType; | |
| const U32 Offtype = fseMetadata->ofType; | |
| const U32 MLtype = fseMetadata->mlType; | |
| DEBUGLOG(5, "ZSTD_compressSubBlock_sequences (fseTablesSize=%zu)", fseMetadata->fseTablesSize); | |
| *seqHead = (BYTE)((LLtype<<6) + (Offtype<<4) + (MLtype<<2)); | |
| ZSTD_memcpy(op, fseMetadata->fseTablesBuffer, fseMetadata->fseTablesSize); | |
| op += fseMetadata->fseTablesSize; | |
| } else { | |
| const U32 repeat = set_repeat; | |
| *seqHead = (BYTE)((repeat<<6) + (repeat<<4) + (repeat<<2)); | |
| } | |
| { size_t const bitstreamSize = ZSTD_encodeSequences( | |
| op, oend - op, | |
| fseTables->matchlengthCTable, mlCode, | |
| fseTables->offcodeCTable, ofCode, | |
| fseTables->litlengthCTable, llCode, | |
| sequences, nbSeq, | |
| longOffsets, bmi2); | |
| FORWARD_IF_ERROR(bitstreamSize, "ZSTD_encodeSequences failed"); | |
| op += bitstreamSize; | |
| /* zstd versions <= 1.3.4 mistakenly report corruption when | |
| * FSE_readNCount() receives a buffer < 4 bytes. | |
| * Fixed by https://github.com/facebook/zstd/pull/1146. | |
| * This can happen when the last set_compressed table present is 2 | |
| * bytes and the bitstream is only one byte. | |
| * In this exceedingly rare case, we will simply emit an uncompressed | |
| * block, since it isn't worth optimizing. | |
| */ | |
| #ifndef FUZZING_BUILD_MODE_UNSAFE_FOR_PRODUCTION | |
| if (writeEntropy && fseMetadata->lastCountSize && fseMetadata->lastCountSize + bitstreamSize < 4) { | |
| /* NCountSize >= 2 && bitstreamSize > 0 ==> lastCountSize == 3 */ | |
| assert(fseMetadata->lastCountSize + bitstreamSize == 3); | |
| DEBUGLOG(5, "Avoiding bug in zstd decoder in versions <= 1.3.4 by " | |
| "emitting an uncompressed block."); | |
| return 0; | |
| } | |
| #endif | |
| DEBUGLOG(5, "ZSTD_compressSubBlock_sequences (bitstreamSize=%zu)", bitstreamSize); | |
| } | |
| /* zstd versions <= 1.4.0 mistakenly report error when | |
| * sequences section body size is less than 3 bytes. | |
| * Fixed by https://github.com/facebook/zstd/pull/1664. | |
| * This can happen when the previous sequences section block is compressed | |
| * with rle mode and the current block's sequences section is compressed | |
| * with repeat mode where sequences section body size can be 1 byte. | |
| */ | |
| #ifndef FUZZING_BUILD_MODE_UNSAFE_FOR_PRODUCTION | |
| if (op-seqHead < 4) { | |
| DEBUGLOG(5, "Avoiding bug in zstd decoder in versions <= 1.4.0 by emitting " | |
| "an uncompressed block when sequences are < 4 bytes"); | |
| return 0; | |
| } | |
| #endif | |
| *entropyWritten = 1; | |
| return op - ostart; | |
| } | |
| /* ZSTD_compressSubBlock() : | |
| * Compresses a single sub-block. | |
| * @return : compressed size of the sub-block | |
| * Or 0 if it failed to compress. */ | |
| static size_t ZSTD_compressSubBlock(const ZSTD_entropyCTables_t* entropy, | |
| const ZSTD_entropyCTablesMetadata_t* entropyMetadata, | |
| const seqDef* sequences, size_t nbSeq, | |
| const BYTE* literals, size_t litSize, | |
| const BYTE* llCode, const BYTE* mlCode, const BYTE* ofCode, | |
| const ZSTD_CCtx_params* cctxParams, | |
| void* dst, size_t dstCapacity, | |
| const int bmi2, | |
| int writeLitEntropy, int writeSeqEntropy, | |
| int* litEntropyWritten, int* seqEntropyWritten, | |
| U32 lastBlock) | |
| { | |
| BYTE* const ostart = (BYTE*)dst; | |
| BYTE* const oend = ostart + dstCapacity; | |
| BYTE* op = ostart + ZSTD_blockHeaderSize; | |
| DEBUGLOG(5, "ZSTD_compressSubBlock (litSize=%zu, nbSeq=%zu, writeLitEntropy=%d, writeSeqEntropy=%d, lastBlock=%d)", | |
| litSize, nbSeq, writeLitEntropy, writeSeqEntropy, lastBlock); | |
| { size_t cLitSize = ZSTD_compressSubBlock_literal((const HUF_CElt*)entropy->huf.CTable, | |
| &entropyMetadata->hufMetadata, literals, litSize, | |
| op, oend-op, bmi2, writeLitEntropy, litEntropyWritten); | |
| FORWARD_IF_ERROR(cLitSize, "ZSTD_compressSubBlock_literal failed"); | |
| if (cLitSize == 0) return 0; | |
| op += cLitSize; | |
| } | |
| { size_t cSeqSize = ZSTD_compressSubBlock_sequences(&entropy->fse, | |
| &entropyMetadata->fseMetadata, | |
| sequences, nbSeq, | |
| llCode, mlCode, ofCode, | |
| cctxParams, | |
| op, oend-op, | |
| bmi2, writeSeqEntropy, seqEntropyWritten); | |
| FORWARD_IF_ERROR(cSeqSize, "ZSTD_compressSubBlock_sequences failed"); | |
| if (cSeqSize == 0) return 0; | |
| op += cSeqSize; | |
| } | |
| /* Write block header */ | |
| { size_t cSize = (op-ostart)-ZSTD_blockHeaderSize; | |
| U32 const cBlockHeader24 = lastBlock + (((U32)bt_compressed)<<1) + (U32)(cSize << 3); | |
| MEM_writeLE24(ostart, cBlockHeader24); | |
| } | |
| return op-ostart; | |
| } | |
| static size_t ZSTD_estimateSubBlockSize_literal(const BYTE* literals, size_t litSize, | |
| const ZSTD_hufCTables_t* huf, | |
| const ZSTD_hufCTablesMetadata_t* hufMetadata, | |
| void* workspace, size_t wkspSize, | |
| int writeEntropy) | |
| { | |
| unsigned* const countWksp = (unsigned*)workspace; | |
| unsigned maxSymbolValue = 255; | |
| size_t literalSectionHeaderSize = 3; /* Use hard coded size of 3 bytes */ | |
| if (hufMetadata->hType == set_basic) return litSize; | |
| else if (hufMetadata->hType == set_rle) return 1; | |
| else if (hufMetadata->hType == set_compressed || hufMetadata->hType == set_repeat) { | |
| size_t const largest = HIST_count_wksp (countWksp, &maxSymbolValue, (const BYTE*)literals, litSize, workspace, wkspSize); | |
| if (ZSTD_isError(largest)) return litSize; | |
| { size_t cLitSizeEstimate = HUF_estimateCompressedSize((const HUF_CElt*)huf->CTable, countWksp, maxSymbolValue); | |
| if (writeEntropy) cLitSizeEstimate += hufMetadata->hufDesSize; | |
| return cLitSizeEstimate + literalSectionHeaderSize; | |
| } } | |
| assert(0); /* impossible */ | |
| return 0; | |
| } | |
| static size_t ZSTD_estimateSubBlockSize_symbolType(symbolEncodingType_e type, | |
| const BYTE* codeTable, unsigned maxCode, | |
| size_t nbSeq, const FSE_CTable* fseCTable, | |
| const U8* additionalBits, | |
| short const* defaultNorm, U32 defaultNormLog, U32 defaultMax, | |
| void* workspace, size_t wkspSize) | |
| { | |
| unsigned* const countWksp = (unsigned*)workspace; | |
| const BYTE* ctp = codeTable; | |
| const BYTE* const ctStart = ctp; | |
| const BYTE* const ctEnd = ctStart + nbSeq; | |
| size_t cSymbolTypeSizeEstimateInBits = 0; | |
| unsigned max = maxCode; | |
| HIST_countFast_wksp(countWksp, &max, codeTable, nbSeq, workspace, wkspSize); /* can't fail */ | |
| if (type == set_basic) { | |
| /* We selected this encoding type, so it must be valid. */ | |
| assert(max <= defaultMax); | |
| cSymbolTypeSizeEstimateInBits = max <= defaultMax | |
| ? ZSTD_crossEntropyCost(defaultNorm, defaultNormLog, countWksp, max) | |
| : ERROR(GENERIC); | |
| } else if (type == set_rle) { | |
| cSymbolTypeSizeEstimateInBits = 0; | |
| } else if (type == set_compressed || type == set_repeat) { | |
| cSymbolTypeSizeEstimateInBits = ZSTD_fseBitCost(fseCTable, countWksp, max); | |
| } | |
| if (ZSTD_isError(cSymbolTypeSizeEstimateInBits)) return nbSeq * 10; | |
| while (ctp < ctEnd) { | |
| if (additionalBits) cSymbolTypeSizeEstimateInBits += additionalBits[*ctp]; | |
| else cSymbolTypeSizeEstimateInBits += *ctp; /* for offset, offset code is also the number of additional bits */ | |
| ctp++; | |
| } | |
| return cSymbolTypeSizeEstimateInBits / 8; | |
| } | |
| static size_t ZSTD_estimateSubBlockSize_sequences(const BYTE* ofCodeTable, | |
| const BYTE* llCodeTable, | |
| const BYTE* mlCodeTable, | |
| size_t nbSeq, | |
| const ZSTD_fseCTables_t* fseTables, | |
| const ZSTD_fseCTablesMetadata_t* fseMetadata, | |
| void* workspace, size_t wkspSize, | |
| int writeEntropy) | |
| { | |
| size_t const sequencesSectionHeaderSize = 3; /* Use hard coded size of 3 bytes */ | |
| size_t cSeqSizeEstimate = 0; | |
| if (nbSeq == 0) return sequencesSectionHeaderSize; | |
| cSeqSizeEstimate += ZSTD_estimateSubBlockSize_symbolType(fseMetadata->ofType, ofCodeTable, MaxOff, | |
| nbSeq, fseTables->offcodeCTable, NULL, | |
| OF_defaultNorm, OF_defaultNormLog, DefaultMaxOff, | |
| workspace, wkspSize); | |
| cSeqSizeEstimate += ZSTD_estimateSubBlockSize_symbolType(fseMetadata->llType, llCodeTable, MaxLL, | |
| nbSeq, fseTables->litlengthCTable, LL_bits, | |
| LL_defaultNorm, LL_defaultNormLog, MaxLL, | |
| workspace, wkspSize); | |
| cSeqSizeEstimate += ZSTD_estimateSubBlockSize_symbolType(fseMetadata->mlType, mlCodeTable, MaxML, | |
| nbSeq, fseTables->matchlengthCTable, ML_bits, | |
| ML_defaultNorm, ML_defaultNormLog, MaxML, | |
| workspace, wkspSize); | |
| if (writeEntropy) cSeqSizeEstimate += fseMetadata->fseTablesSize; | |
| return cSeqSizeEstimate + sequencesSectionHeaderSize; | |
| } | |
| static size_t ZSTD_estimateSubBlockSize(const BYTE* literals, size_t litSize, | |
| const BYTE* ofCodeTable, | |
| const BYTE* llCodeTable, | |
| const BYTE* mlCodeTable, | |
| size_t nbSeq, | |
| const ZSTD_entropyCTables_t* entropy, | |
| const ZSTD_entropyCTablesMetadata_t* entropyMetadata, | |
| void* workspace, size_t wkspSize, | |
| int writeLitEntropy, int writeSeqEntropy) { | |
| size_t cSizeEstimate = 0; | |
| cSizeEstimate += ZSTD_estimateSubBlockSize_literal(literals, litSize, | |
| &entropy->huf, &entropyMetadata->hufMetadata, | |
| workspace, wkspSize, writeLitEntropy); | |
| cSizeEstimate += ZSTD_estimateSubBlockSize_sequences(ofCodeTable, llCodeTable, mlCodeTable, | |
| nbSeq, &entropy->fse, &entropyMetadata->fseMetadata, | |
| workspace, wkspSize, writeSeqEntropy); | |
| return cSizeEstimate + ZSTD_blockHeaderSize; | |
| } | |
| static int ZSTD_needSequenceEntropyTables(ZSTD_fseCTablesMetadata_t const* fseMetadata) | |
| { | |
| if (fseMetadata->llType == set_compressed || fseMetadata->llType == set_rle) | |
| return 1; | |
| if (fseMetadata->mlType == set_compressed || fseMetadata->mlType == set_rle) | |
| return 1; | |
| if (fseMetadata->ofType == set_compressed || fseMetadata->ofType == set_rle) | |
| return 1; | |
| return 0; | |
| } | |
| /* ZSTD_compressSubBlock_multi() : | |
| * Breaks super-block into multiple sub-blocks and compresses them. | |
| * Entropy will be written to the first block. | |
| * The following blocks will use repeat mode to compress. | |
| * All sub-blocks are compressed blocks (no raw or rle blocks). | |
| * @return : compressed size of the super block (which is multiple ZSTD blocks) | |
| * Or 0 if it failed to compress. */ | |
| static size_t ZSTD_compressSubBlock_multi(const seqStore_t* seqStorePtr, | |
| const ZSTD_compressedBlockState_t* prevCBlock, | |
| ZSTD_compressedBlockState_t* nextCBlock, | |
| const ZSTD_entropyCTablesMetadata_t* entropyMetadata, | |
| const ZSTD_CCtx_params* cctxParams, | |
| void* dst, size_t dstCapacity, | |
| const void* src, size_t srcSize, | |
| const int bmi2, U32 lastBlock, | |
| void* workspace, size_t wkspSize) | |
| { | |
| const seqDef* const sstart = seqStorePtr->sequencesStart; | |
| const seqDef* const send = seqStorePtr->sequences; | |
| const seqDef* sp = sstart; | |
| const BYTE* const lstart = seqStorePtr->litStart; | |
| const BYTE* const lend = seqStorePtr->lit; | |
| const BYTE* lp = lstart; | |
| BYTE const* ip = (BYTE const*)src; | |
| BYTE const* const iend = ip + srcSize; | |
| BYTE* const ostart = (BYTE*)dst; | |
| BYTE* const oend = ostart + dstCapacity; | |
| BYTE* op = ostart; | |
| const BYTE* llCodePtr = seqStorePtr->llCode; | |
| const BYTE* mlCodePtr = seqStorePtr->mlCode; | |
| const BYTE* ofCodePtr = seqStorePtr->ofCode; | |
| size_t targetCBlockSize = cctxParams->targetCBlockSize; | |
| size_t litSize, seqCount; | |
| int writeLitEntropy = entropyMetadata->hufMetadata.hType == set_compressed; | |
| int writeSeqEntropy = 1; | |
| int lastSequence = 0; | |
| DEBUGLOG(5, "ZSTD_compressSubBlock_multi (litSize=%u, nbSeq=%u)", | |
| (unsigned)(lend-lp), (unsigned)(send-sstart)); | |
| litSize = 0; | |
| seqCount = 0; | |
| do { | |
| size_t cBlockSizeEstimate = 0; | |
| if (sstart == send) { | |
| lastSequence = 1; | |
| } else { | |
| const seqDef* const sequence = sp + seqCount; | |
| lastSequence = sequence == send - 1; | |
| litSize += ZSTD_getSequenceLength(seqStorePtr, sequence).litLength; | |
| seqCount++; | |
| } | |
| if (lastSequence) { | |
| assert(lp <= lend); | |
| assert(litSize <= (size_t)(lend - lp)); | |
| litSize = (size_t)(lend - lp); | |
| } | |
| /* I think there is an optimization opportunity here. | |
| * Calling ZSTD_estimateSubBlockSize for every sequence can be wasteful | |
| * since it recalculates estimate from scratch. | |
| * For example, it would recount literal distribution and symbol codes every time. | |
| */ | |
| cBlockSizeEstimate = ZSTD_estimateSubBlockSize(lp, litSize, ofCodePtr, llCodePtr, mlCodePtr, seqCount, | |
| &nextCBlock->entropy, entropyMetadata, | |
| workspace, wkspSize, writeLitEntropy, writeSeqEntropy); | |
| if (cBlockSizeEstimate > targetCBlockSize || lastSequence) { | |
| int litEntropyWritten = 0; | |
| int seqEntropyWritten = 0; | |
| const size_t decompressedSize = ZSTD_seqDecompressedSize(seqStorePtr, sp, seqCount, litSize, lastSequence); | |
| const size_t cSize = ZSTD_compressSubBlock(&nextCBlock->entropy, entropyMetadata, | |
| sp, seqCount, | |
| lp, litSize, | |
| llCodePtr, mlCodePtr, ofCodePtr, | |
| cctxParams, | |
| op, oend-op, | |
| bmi2, writeLitEntropy, writeSeqEntropy, | |
| &litEntropyWritten, &seqEntropyWritten, | |
| lastBlock && lastSequence); | |
| FORWARD_IF_ERROR(cSize, "ZSTD_compressSubBlock failed"); | |
| if (cSize > 0 && cSize < decompressedSize) { | |
| DEBUGLOG(5, "Committed the sub-block"); | |
| assert(ip + decompressedSize <= iend); | |
| ip += decompressedSize; | |
| sp += seqCount; | |
| lp += litSize; | |
| op += cSize; | |
| llCodePtr += seqCount; | |
| mlCodePtr += seqCount; | |
| ofCodePtr += seqCount; | |
| litSize = 0; | |
| seqCount = 0; | |
| /* Entropy only needs to be written once */ | |
| if (litEntropyWritten) { | |
| writeLitEntropy = 0; | |
| } | |
| if (seqEntropyWritten) { | |
| writeSeqEntropy = 0; | |
| } | |
| } | |
| } | |
| } while (!lastSequence); | |
| if (writeLitEntropy) { | |
| DEBUGLOG(5, "ZSTD_compressSubBlock_multi has literal entropy tables unwritten"); | |
| ZSTD_memcpy(&nextCBlock->entropy.huf, &prevCBlock->entropy.huf, sizeof(prevCBlock->entropy.huf)); | |
| } | |
| if (writeSeqEntropy && ZSTD_needSequenceEntropyTables(&entropyMetadata->fseMetadata)) { | |
| /* If we haven't written our entropy tables, then we've violated our contract and | |
| * must emit an uncompressed block. | |
| */ | |
| DEBUGLOG(5, "ZSTD_compressSubBlock_multi has sequence entropy tables unwritten"); | |
| return 0; | |
| } | |
| if (ip < iend) { | |
| size_t const cSize = ZSTD_noCompressBlock(op, oend - op, ip, iend - ip, lastBlock); | |
| DEBUGLOG(5, "ZSTD_compressSubBlock_multi last sub-block uncompressed, %zu bytes", (size_t)(iend - ip)); | |
| FORWARD_IF_ERROR(cSize, "ZSTD_noCompressBlock failed"); | |
| assert(cSize != 0); | |
| op += cSize; | |
| /* We have to regenerate the repcodes because we've skipped some sequences */ | |
| if (sp < send) { | |
| seqDef const* seq; | |
| repcodes_t rep; | |
| ZSTD_memcpy(&rep, prevCBlock->rep, sizeof(rep)); | |
| for (seq = sstart; seq < sp; ++seq) { | |
| ZSTD_updateRep(rep.rep, seq->offBase - 1, ZSTD_getSequenceLength(seqStorePtr, seq).litLength == 0); | |
| } | |
| ZSTD_memcpy(nextCBlock->rep, &rep, sizeof(rep)); | |
| } | |
| } | |
| DEBUGLOG(5, "ZSTD_compressSubBlock_multi compressed"); | |
| return op-ostart; | |
| } | |
| size_t ZSTD_compressSuperBlock(ZSTD_CCtx* zc, | |
| void* dst, size_t dstCapacity, | |
| void const* src, size_t srcSize, | |
| unsigned lastBlock) { | |
| ZSTD_entropyCTablesMetadata_t entropyMetadata; | |
| FORWARD_IF_ERROR(ZSTD_buildBlockEntropyStats(&zc->seqStore, | |
| &zc->blockState.prevCBlock->entropy, | |
| &zc->blockState.nextCBlock->entropy, | |
| &zc->appliedParams, | |
| &entropyMetadata, | |
| zc->entropyWorkspace, ENTROPY_WORKSPACE_SIZE /* statically allocated in resetCCtx */), ""); | |
| return ZSTD_compressSubBlock_multi(&zc->seqStore, | |
| zc->blockState.prevCBlock, | |
| zc->blockState.nextCBlock, | |
| &entropyMetadata, | |
| &zc->appliedParams, | |
| dst, dstCapacity, | |
| src, srcSize, | |
| zc->bmi2, lastBlock, | |
| zc->entropyWorkspace, ENTROPY_WORKSPACE_SIZE /* statically allocated in resetCCtx */); | |
| } |