| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * eBPF JIT compiler |
| * |
| * Copyright 2016 Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> |
| * IBM Corporation |
| * |
| * Based on the powerpc classic BPF JIT compiler by Matt Evans |
| */ |
| #include <linux/moduleloader.h> |
| #include <asm/cacheflush.h> |
| #include <asm/asm-compat.h> |
| #include <linux/netdevice.h> |
| #include <linux/filter.h> |
| #include <linux/if_vlan.h> |
| #include <linux/kernel.h> |
| #include <linux/memory.h> |
| #include <linux/bpf.h> |
| |
| #include <asm/kprobes.h> |
| #include <asm/text-patching.h> |
| |
| #include "bpf_jit.h" |
| |
| /* These offsets are from bpf prog end and stay the same across progs */ |
| static int bpf_jit_ool_stub, bpf_jit_long_branch_stub; |
| |
| static void bpf_jit_fill_ill_insns(void *area, unsigned int size) |
| { |
| memset32(area, BREAKPOINT_INSTRUCTION, size / 4); |
| } |
| |
| void dummy_tramp(void); |
| |
| asm ( |
| " .pushsection .text, \"ax\", @progbits ;" |
| " .global dummy_tramp ;" |
| " .type dummy_tramp, @function ;" |
| "dummy_tramp: ;" |
| #ifdef CONFIG_PPC_FTRACE_OUT_OF_LINE |
| " blr ;" |
| #else |
| /* LR is always in r11, so we don't need a 'mflr r11' here */ |
| " mtctr 11 ;" |
| " mtlr 0 ;" |
| " bctr ;" |
| #endif |
| " .size dummy_tramp, .-dummy_tramp ;" |
| " .popsection ;" |
| ); |
| |
| void bpf_jit_build_fentry_stubs(u32 *image, struct codegen_context *ctx) |
| { |
| int ool_stub_idx, long_branch_stub_idx; |
| |
| /* |
| * Out-of-line stub: |
| * mflr r0 |
| * [b|bl] tramp |
| * mtlr r0 // only with CONFIG_PPC_FTRACE_OUT_OF_LINE |
| * b bpf_func + 4 |
| */ |
| ool_stub_idx = ctx->idx; |
| EMIT(PPC_RAW_MFLR(_R0)); |
| EMIT(PPC_RAW_NOP()); |
| if (IS_ENABLED(CONFIG_PPC_FTRACE_OUT_OF_LINE)) |
| EMIT(PPC_RAW_MTLR(_R0)); |
| WARN_ON_ONCE(!is_offset_in_branch_range(4 - (long)ctx->idx * 4)); |
| EMIT(PPC_RAW_BRANCH(4 - (long)ctx->idx * 4)); |
| |
| /* |
| * Long branch stub: |
| * .long <dummy_tramp_addr> |
| * mflr r11 |
| * bcl 20,31,$+4 |
| * mflr r12 |
| * ld r12, -8-SZL(r12) |
| * mtctr r12 |
| * mtlr r11 // needed to retain ftrace ABI |
| * bctr |
| */ |
| if (image) |
| *((unsigned long *)&image[ctx->idx]) = (unsigned long)dummy_tramp; |
| ctx->idx += SZL / 4; |
| long_branch_stub_idx = ctx->idx; |
| EMIT(PPC_RAW_MFLR(_R11)); |
| EMIT(PPC_RAW_BCL4()); |
| EMIT(PPC_RAW_MFLR(_R12)); |
| EMIT(PPC_RAW_LL(_R12, _R12, -8-SZL)); |
| EMIT(PPC_RAW_MTCTR(_R12)); |
| EMIT(PPC_RAW_MTLR(_R11)); |
| EMIT(PPC_RAW_BCTR()); |
| |
| if (!bpf_jit_ool_stub) { |
| bpf_jit_ool_stub = (ctx->idx - ool_stub_idx) * 4; |
| bpf_jit_long_branch_stub = (ctx->idx - long_branch_stub_idx) * 4; |
| } |
| } |
| |
| int bpf_jit_emit_exit_insn(u32 *image, struct codegen_context *ctx, int tmp_reg, long exit_addr) |
| { |
| if (!exit_addr || is_offset_in_branch_range(exit_addr - (ctx->idx * 4))) { |
| PPC_JMP(exit_addr); |
| } else if (ctx->alt_exit_addr) { |
| if (WARN_ON(!is_offset_in_branch_range((long)ctx->alt_exit_addr - (ctx->idx * 4)))) |
| return -1; |
| PPC_JMP(ctx->alt_exit_addr); |
| } else { |
| ctx->alt_exit_addr = ctx->idx * 4; |
| bpf_jit_build_epilogue(image, ctx); |
| } |
| |
| return 0; |
| } |
| |
| struct powerpc_jit_data { |
| /* address of rw header */ |
| struct bpf_binary_header *hdr; |
| /* address of ro final header */ |
| struct bpf_binary_header *fhdr; |
| u32 *addrs; |
| u8 *fimage; |
| u32 proglen; |
| struct codegen_context ctx; |
| }; |
| |
| bool bpf_jit_needs_zext(void) |
| { |
| return true; |
| } |
| |
| struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *fp) |
| { |
| u32 proglen; |
| u32 alloclen; |
| u8 *image = NULL; |
| u32 *code_base; |
| u32 *addrs; |
| struct powerpc_jit_data *jit_data; |
| struct codegen_context cgctx; |
| int pass; |
| int flen; |
| struct bpf_binary_header *fhdr = NULL; |
| struct bpf_binary_header *hdr = NULL; |
| struct bpf_prog *org_fp = fp; |
| struct bpf_prog *tmp_fp; |
| bool bpf_blinded = false; |
| bool extra_pass = false; |
| u8 *fimage = NULL; |
| u32 *fcode_base; |
| u32 extable_len; |
| u32 fixup_len; |
| |
| if (!fp->jit_requested) |
| return org_fp; |
| |
| tmp_fp = bpf_jit_blind_constants(org_fp); |
| if (IS_ERR(tmp_fp)) |
| return org_fp; |
| |
| if (tmp_fp != org_fp) { |
| bpf_blinded = true; |
| fp = tmp_fp; |
| } |
| |
| jit_data = fp->aux->jit_data; |
| if (!jit_data) { |
| jit_data = kzalloc(sizeof(*jit_data), GFP_KERNEL); |
| if (!jit_data) { |
| fp = org_fp; |
| goto out; |
| } |
| fp->aux->jit_data = jit_data; |
| } |
| |
| flen = fp->len; |
| addrs = jit_data->addrs; |
| if (addrs) { |
| cgctx = jit_data->ctx; |
| /* |
| * JIT compiled to a writable location (image/code_base) first. |
| * It is then moved to the readonly final location (fimage/fcode_base) |
| * using instruction patching. |
| */ |
| fimage = jit_data->fimage; |
| fhdr = jit_data->fhdr; |
| proglen = jit_data->proglen; |
| hdr = jit_data->hdr; |
| image = (void *)hdr + ((void *)fimage - (void *)fhdr); |
| extra_pass = true; |
| /* During extra pass, ensure index is reset before repopulating extable entries */ |
| cgctx.exentry_idx = 0; |
| goto skip_init_ctx; |
| } |
| |
| addrs = kcalloc(flen + 1, sizeof(*addrs), GFP_KERNEL); |
| if (addrs == NULL) { |
| fp = org_fp; |
| goto out_addrs; |
| } |
| |
| memset(&cgctx, 0, sizeof(struct codegen_context)); |
| bpf_jit_init_reg_mapping(&cgctx); |
| |
| /* Make sure that the stack is quadword aligned. */ |
| cgctx.stack_size = round_up(fp->aux->stack_depth, 16); |
| |
| /* Scouting faux-generate pass 0 */ |
| if (bpf_jit_build_body(fp, NULL, NULL, &cgctx, addrs, 0, false)) { |
| /* We hit something illegal or unsupported. */ |
| fp = org_fp; |
| goto out_addrs; |
| } |
| |
| /* |
| * If we have seen a tail call, we need a second pass. |
| * This is because bpf_jit_emit_common_epilogue() is called |
| * from bpf_jit_emit_tail_call() with a not yet stable ctx->seen. |
| * We also need a second pass if we ended up with too large |
| * a program so as to ensure BPF_EXIT branches are in range. |
| */ |
| if (cgctx.seen & SEEN_TAILCALL || !is_offset_in_branch_range((long)cgctx.idx * 4)) { |
| cgctx.idx = 0; |
| if (bpf_jit_build_body(fp, NULL, NULL, &cgctx, addrs, 0, false)) { |
| fp = org_fp; |
| goto out_addrs; |
| } |
| } |
| |
| bpf_jit_realloc_regs(&cgctx); |
| /* |
| * Pretend to build prologue, given the features we've seen. This will |
| * update ctgtx.idx as it pretends to output instructions, then we can |
| * calculate total size from idx. |
| */ |
| bpf_jit_build_prologue(NULL, &cgctx); |
| addrs[fp->len] = cgctx.idx * 4; |
| bpf_jit_build_epilogue(NULL, &cgctx); |
| |
| fixup_len = fp->aux->num_exentries * BPF_FIXUP_LEN * 4; |
| extable_len = fp->aux->num_exentries * sizeof(struct exception_table_entry); |
| |
| proglen = cgctx.idx * 4; |
| alloclen = proglen + FUNCTION_DESCR_SIZE + fixup_len + extable_len; |
| |
| fhdr = bpf_jit_binary_pack_alloc(alloclen, &fimage, 4, &hdr, &image, |
| bpf_jit_fill_ill_insns); |
| if (!fhdr) { |
| fp = org_fp; |
| goto out_addrs; |
| } |
| |
| if (extable_len) |
| fp->aux->extable = (void *)fimage + FUNCTION_DESCR_SIZE + proglen + fixup_len; |
| |
| skip_init_ctx: |
| code_base = (u32 *)(image + FUNCTION_DESCR_SIZE); |
| fcode_base = (u32 *)(fimage + FUNCTION_DESCR_SIZE); |
| |
| /* Code generation passes 1-2 */ |
| for (pass = 1; pass < 3; pass++) { |
| /* Now build the prologue, body code & epilogue for real. */ |
| cgctx.idx = 0; |
| cgctx.alt_exit_addr = 0; |
| bpf_jit_build_prologue(code_base, &cgctx); |
| if (bpf_jit_build_body(fp, code_base, fcode_base, &cgctx, addrs, pass, |
| extra_pass)) { |
| bpf_arch_text_copy(&fhdr->size, &hdr->size, sizeof(hdr->size)); |
| bpf_jit_binary_pack_free(fhdr, hdr); |
| fp = org_fp; |
| goto out_addrs; |
| } |
| bpf_jit_build_epilogue(code_base, &cgctx); |
| |
| if (bpf_jit_enable > 1) |
| pr_info("Pass %d: shrink = %d, seen = 0x%x\n", pass, |
| proglen - (cgctx.idx * 4), cgctx.seen); |
| } |
| |
| if (bpf_jit_enable > 1) |
| /* |
| * Note that we output the base address of the code_base |
| * rather than image, since opcodes are in code_base. |
| */ |
| bpf_jit_dump(flen, proglen, pass, code_base); |
| |
| #ifdef CONFIG_PPC64_ELF_ABI_V1 |
| /* Function descriptor nastiness: Address + TOC */ |
| ((u64 *)image)[0] = (u64)fcode_base; |
| ((u64 *)image)[1] = local_paca->kernel_toc; |
| #endif |
| |
| fp->bpf_func = (void *)fimage; |
| fp->jited = 1; |
| fp->jited_len = cgctx.idx * 4 + FUNCTION_DESCR_SIZE; |
| |
| if (!fp->is_func || extra_pass) { |
| if (bpf_jit_binary_pack_finalize(fhdr, hdr)) { |
| fp = org_fp; |
| goto out_addrs; |
| } |
| bpf_prog_fill_jited_linfo(fp, addrs); |
| out_addrs: |
| kfree(addrs); |
| kfree(jit_data); |
| fp->aux->jit_data = NULL; |
| } else { |
| jit_data->addrs = addrs; |
| jit_data->ctx = cgctx; |
| jit_data->proglen = proglen; |
| jit_data->fimage = fimage; |
| jit_data->fhdr = fhdr; |
| jit_data->hdr = hdr; |
| } |
| |
| out: |
| if (bpf_blinded) |
| bpf_jit_prog_release_other(fp, fp == org_fp ? tmp_fp : org_fp); |
| |
| return fp; |
| } |
| |
| /* |
| * The caller should check for (BPF_MODE(code) == BPF_PROBE_MEM) before calling |
| * this function, as this only applies to BPF_PROBE_MEM, for now. |
| */ |
| int bpf_add_extable_entry(struct bpf_prog *fp, u32 *image, u32 *fimage, int pass, |
| struct codegen_context *ctx, int insn_idx, int jmp_off, |
| int dst_reg) |
| { |
| off_t offset; |
| unsigned long pc; |
| struct exception_table_entry *ex, *ex_entry; |
| u32 *fixup; |
| |
| /* Populate extable entries only in the last pass */ |
| if (pass != 2) |
| return 0; |
| |
| if (!fp->aux->extable || |
| WARN_ON_ONCE(ctx->exentry_idx >= fp->aux->num_exentries)) |
| return -EINVAL; |
| |
| /* |
| * Program is first written to image before copying to the |
| * final location (fimage). Accordingly, update in the image first. |
| * As all offsets used are relative, copying as is to the |
| * final location should be alright. |
| */ |
| pc = (unsigned long)&image[insn_idx]; |
| ex = (void *)fp->aux->extable - (void *)fimage + (void *)image; |
| |
| fixup = (void *)ex - |
| (fp->aux->num_exentries * BPF_FIXUP_LEN * 4) + |
| (ctx->exentry_idx * BPF_FIXUP_LEN * 4); |
| |
| fixup[0] = PPC_RAW_LI(dst_reg, 0); |
| if (IS_ENABLED(CONFIG_PPC32)) |
| fixup[1] = PPC_RAW_LI(dst_reg - 1, 0); /* clear higher 32-bit register too */ |
| |
| fixup[BPF_FIXUP_LEN - 1] = |
| PPC_RAW_BRANCH((long)(pc + jmp_off) - (long)&fixup[BPF_FIXUP_LEN - 1]); |
| |
| ex_entry = &ex[ctx->exentry_idx]; |
| |
| offset = pc - (long)&ex_entry->insn; |
| if (WARN_ON_ONCE(offset >= 0 || offset < INT_MIN)) |
| return -ERANGE; |
| ex_entry->insn = offset; |
| |
| offset = (long)fixup - (long)&ex_entry->fixup; |
| if (WARN_ON_ONCE(offset >= 0 || offset < INT_MIN)) |
| return -ERANGE; |
| ex_entry->fixup = offset; |
| |
| ctx->exentry_idx++; |
| return 0; |
| } |
| |
| void *bpf_arch_text_copy(void *dst, void *src, size_t len) |
| { |
| int err; |
| |
| if (WARN_ON_ONCE(core_kernel_text((unsigned long)dst))) |
| return ERR_PTR(-EINVAL); |
| |
| mutex_lock(&text_mutex); |
| err = patch_instructions(dst, src, len, false); |
| mutex_unlock(&text_mutex); |
| |
| return err ? ERR_PTR(err) : dst; |
| } |
| |
| int bpf_arch_text_invalidate(void *dst, size_t len) |
| { |
| u32 insn = BREAKPOINT_INSTRUCTION; |
| int ret; |
| |
| if (WARN_ON_ONCE(core_kernel_text((unsigned long)dst))) |
| return -EINVAL; |
| |
| mutex_lock(&text_mutex); |
| ret = patch_instructions(dst, &insn, len, true); |
| mutex_unlock(&text_mutex); |
| |
| return ret; |
| } |
| |
| void bpf_jit_free(struct bpf_prog *fp) |
| { |
| if (fp->jited) { |
| struct powerpc_jit_data *jit_data = fp->aux->jit_data; |
| struct bpf_binary_header *hdr; |
| |
| /* |
| * If we fail the final pass of JIT (from jit_subprogs), |
| * the program may not be finalized yet. Call finalize here |
| * before freeing it. |
| */ |
| if (jit_data) { |
| bpf_jit_binary_pack_finalize(jit_data->fhdr, jit_data->hdr); |
| kvfree(jit_data->addrs); |
| kfree(jit_data); |
| } |
| hdr = bpf_jit_binary_pack_hdr(fp); |
| bpf_jit_binary_pack_free(hdr, NULL); |
| WARN_ON_ONCE(!bpf_prog_kallsyms_verify_off(fp)); |
| } |
| |
| bpf_prog_unlock_free(fp); |
| } |
| |
| bool bpf_jit_supports_kfunc_call(void) |
| { |
| return true; |
| } |
| |
| bool bpf_jit_supports_far_kfunc_call(void) |
| { |
| return IS_ENABLED(CONFIG_PPC64); |
| } |
| |
| void *arch_alloc_bpf_trampoline(unsigned int size) |
| { |
| return bpf_prog_pack_alloc(size, bpf_jit_fill_ill_insns); |
| } |
| |
| void arch_free_bpf_trampoline(void *image, unsigned int size) |
| { |
| bpf_prog_pack_free(image, size); |
| } |
| |
| int arch_protect_bpf_trampoline(void *image, unsigned int size) |
| { |
| return 0; |
| } |
| |
| static int invoke_bpf_prog(u32 *image, u32 *ro_image, struct codegen_context *ctx, |
| struct bpf_tramp_link *l, int regs_off, int retval_off, |
| int run_ctx_off, bool save_ret) |
| { |
| struct bpf_prog *p = l->link.prog; |
| ppc_inst_t branch_insn; |
| u32 jmp_idx; |
| int ret = 0; |
| |
| /* Save cookie */ |
| if (IS_ENABLED(CONFIG_PPC64)) { |
| PPC_LI64(_R3, l->cookie); |
| EMIT(PPC_RAW_STD(_R3, _R1, run_ctx_off + offsetof(struct bpf_tramp_run_ctx, |
| bpf_cookie))); |
| } else { |
| PPC_LI32(_R3, l->cookie >> 32); |
| PPC_LI32(_R4, l->cookie); |
| EMIT(PPC_RAW_STW(_R3, _R1, |
| run_ctx_off + offsetof(struct bpf_tramp_run_ctx, bpf_cookie))); |
| EMIT(PPC_RAW_STW(_R4, _R1, |
| run_ctx_off + offsetof(struct bpf_tramp_run_ctx, bpf_cookie) + 4)); |
| } |
| |
| /* __bpf_prog_enter(p, &bpf_tramp_run_ctx) */ |
| PPC_LI_ADDR(_R3, p); |
| EMIT(PPC_RAW_MR(_R25, _R3)); |
| EMIT(PPC_RAW_ADDI(_R4, _R1, run_ctx_off)); |
| ret = bpf_jit_emit_func_call_rel(image, ro_image, ctx, |
| (unsigned long)bpf_trampoline_enter(p)); |
| if (ret) |
| return ret; |
| |
| /* Remember prog start time returned by __bpf_prog_enter */ |
| EMIT(PPC_RAW_MR(_R26, _R3)); |
| |
| /* |
| * if (__bpf_prog_enter(p) == 0) |
| * goto skip_exec_of_prog; |
| * |
| * Emit a nop to be later patched with conditional branch, once offset is known |
| */ |
| EMIT(PPC_RAW_CMPLI(_R3, 0)); |
| jmp_idx = ctx->idx; |
| EMIT(PPC_RAW_NOP()); |
| |
| /* p->bpf_func(ctx) */ |
| EMIT(PPC_RAW_ADDI(_R3, _R1, regs_off)); |
| if (!p->jited) |
| PPC_LI_ADDR(_R4, (unsigned long)p->insnsi); |
| /* Account for max possible instructions during dummy pass for size calculation */ |
| if (image && !create_branch(&branch_insn, (u32 *)&ro_image[ctx->idx], |
| (unsigned long)p->bpf_func, |
| BRANCH_SET_LINK)) { |
| image[ctx->idx] = ppc_inst_val(branch_insn); |
| ctx->idx++; |
| } else { |
| EMIT(PPC_RAW_LL(_R12, _R25, offsetof(struct bpf_prog, bpf_func))); |
| EMIT(PPC_RAW_MTCTR(_R12)); |
| EMIT(PPC_RAW_BCTRL()); |
| } |
| |
| if (save_ret) |
| EMIT(PPC_RAW_STL(_R3, _R1, retval_off)); |
| |
| /* Fix up branch */ |
| if (image) { |
| if (create_cond_branch(&branch_insn, &image[jmp_idx], |
| (unsigned long)&image[ctx->idx], COND_EQ << 16)) |
| return -EINVAL; |
| image[jmp_idx] = ppc_inst_val(branch_insn); |
| } |
| |
| /* __bpf_prog_exit(p, start_time, &bpf_tramp_run_ctx) */ |
| EMIT(PPC_RAW_MR(_R3, _R25)); |
| EMIT(PPC_RAW_MR(_R4, _R26)); |
| EMIT(PPC_RAW_ADDI(_R5, _R1, run_ctx_off)); |
| ret = bpf_jit_emit_func_call_rel(image, ro_image, ctx, |
| (unsigned long)bpf_trampoline_exit(p)); |
| |
| return ret; |
| } |
| |
| static int invoke_bpf_mod_ret(u32 *image, u32 *ro_image, struct codegen_context *ctx, |
| struct bpf_tramp_links *tl, int regs_off, int retval_off, |
| int run_ctx_off, u32 *branches) |
| { |
| int i; |
| |
| /* |
| * The first fmod_ret program will receive a garbage return value. |
| * Set this to 0 to avoid confusing the program. |
| */ |
| EMIT(PPC_RAW_LI(_R3, 0)); |
| EMIT(PPC_RAW_STL(_R3, _R1, retval_off)); |
| for (i = 0; i < tl->nr_links; i++) { |
| if (invoke_bpf_prog(image, ro_image, ctx, tl->links[i], regs_off, retval_off, |
| run_ctx_off, true)) |
| return -EINVAL; |
| |
| /* |
| * mod_ret prog stored return value after prog ctx. Emit: |
| * if (*(u64 *)(ret_val) != 0) |
| * goto do_fexit; |
| */ |
| EMIT(PPC_RAW_LL(_R3, _R1, retval_off)); |
| EMIT(PPC_RAW_CMPLI(_R3, 0)); |
| |
| /* |
| * Save the location of the branch and generate a nop, which is |
| * replaced with a conditional jump once do_fexit (i.e. the |
| * start of the fexit invocation) is finalized. |
| */ |
| branches[i] = ctx->idx; |
| EMIT(PPC_RAW_NOP()); |
| } |
| |
| return 0; |
| } |
| |
| static void bpf_trampoline_setup_tail_call_cnt(u32 *image, struct codegen_context *ctx, |
| int func_frame_offset, int r4_off) |
| { |
| if (IS_ENABLED(CONFIG_PPC64)) { |
| /* See bpf_jit_stack_tailcallcnt() */ |
| int tailcallcnt_offset = 6 * 8; |
| |
| EMIT(PPC_RAW_LL(_R3, _R1, func_frame_offset - tailcallcnt_offset)); |
| EMIT(PPC_RAW_STL(_R3, _R1, -tailcallcnt_offset)); |
| } else { |
| /* See bpf_jit_stack_offsetof() and BPF_PPC_TC */ |
| EMIT(PPC_RAW_LL(_R4, _R1, r4_off)); |
| } |
| } |
| |
| static void bpf_trampoline_restore_tail_call_cnt(u32 *image, struct codegen_context *ctx, |
| int func_frame_offset, int r4_off) |
| { |
| if (IS_ENABLED(CONFIG_PPC64)) { |
| /* See bpf_jit_stack_tailcallcnt() */ |
| int tailcallcnt_offset = 6 * 8; |
| |
| EMIT(PPC_RAW_LL(_R3, _R1, -tailcallcnt_offset)); |
| EMIT(PPC_RAW_STL(_R3, _R1, func_frame_offset - tailcallcnt_offset)); |
| } else { |
| /* See bpf_jit_stack_offsetof() and BPF_PPC_TC */ |
| EMIT(PPC_RAW_STL(_R4, _R1, r4_off)); |
| } |
| } |
| |
| static void bpf_trampoline_save_args(u32 *image, struct codegen_context *ctx, int func_frame_offset, |
| int nr_regs, int regs_off) |
| { |
| int param_save_area_offset; |
| |
| param_save_area_offset = func_frame_offset; /* the two frames we alloted */ |
| param_save_area_offset += STACK_FRAME_MIN_SIZE; /* param save area is past frame header */ |
| |
| for (int i = 0; i < nr_regs; i++) { |
| if (i < 8) { |
| EMIT(PPC_RAW_STL(_R3 + i, _R1, regs_off + i * SZL)); |
| } else { |
| EMIT(PPC_RAW_LL(_R3, _R1, param_save_area_offset + i * SZL)); |
| EMIT(PPC_RAW_STL(_R3, _R1, regs_off + i * SZL)); |
| } |
| } |
| } |
| |
| /* Used when restoring just the register parameters when returning back */ |
| static void bpf_trampoline_restore_args_regs(u32 *image, struct codegen_context *ctx, |
| int nr_regs, int regs_off) |
| { |
| for (int i = 0; i < nr_regs && i < 8; i++) |
| EMIT(PPC_RAW_LL(_R3 + i, _R1, regs_off + i * SZL)); |
| } |
| |
| /* Used when we call into the traced function. Replicate parameter save area */ |
| static void bpf_trampoline_restore_args_stack(u32 *image, struct codegen_context *ctx, |
| int func_frame_offset, int nr_regs, int regs_off) |
| { |
| int param_save_area_offset; |
| |
| param_save_area_offset = func_frame_offset; /* the two frames we alloted */ |
| param_save_area_offset += STACK_FRAME_MIN_SIZE; /* param save area is past frame header */ |
| |
| for (int i = 8; i < nr_regs; i++) { |
| EMIT(PPC_RAW_LL(_R3, _R1, param_save_area_offset + i * SZL)); |
| EMIT(PPC_RAW_STL(_R3, _R1, STACK_FRAME_MIN_SIZE + i * SZL)); |
| } |
| bpf_trampoline_restore_args_regs(image, ctx, nr_regs, regs_off); |
| } |
| |
| static int __arch_prepare_bpf_trampoline(struct bpf_tramp_image *im, void *rw_image, |
| void *rw_image_end, void *ro_image, |
| const struct btf_func_model *m, u32 flags, |
| struct bpf_tramp_links *tlinks, |
| void *func_addr) |
| { |
| int regs_off, nregs_off, ip_off, run_ctx_off, retval_off, nvr_off, alt_lr_off, r4_off = 0; |
| int i, ret, nr_regs, bpf_frame_size = 0, bpf_dummy_frame_size = 0, func_frame_offset; |
| struct bpf_tramp_links *fmod_ret = &tlinks[BPF_TRAMP_MODIFY_RETURN]; |
| struct bpf_tramp_links *fentry = &tlinks[BPF_TRAMP_FENTRY]; |
| struct bpf_tramp_links *fexit = &tlinks[BPF_TRAMP_FEXIT]; |
| struct codegen_context codegen_ctx, *ctx; |
| u32 *image = (u32 *)rw_image; |
| ppc_inst_t branch_insn; |
| u32 *branches = NULL; |
| bool save_ret; |
| |
| if (IS_ENABLED(CONFIG_PPC32)) |
| return -EOPNOTSUPP; |
| |
| nr_regs = m->nr_args; |
| /* Extra registers for struct arguments */ |
| for (i = 0; i < m->nr_args; i++) |
| if (m->arg_size[i] > SZL) |
| nr_regs += round_up(m->arg_size[i], SZL) / SZL - 1; |
| |
| if (nr_regs > MAX_BPF_FUNC_ARGS) |
| return -EOPNOTSUPP; |
| |
| ctx = &codegen_ctx; |
| memset(ctx, 0, sizeof(*ctx)); |
| |
| /* |
| * Generated stack layout: |
| * |
| * func prev back chain [ back chain ] |
| * [ ] |
| * bpf prog redzone/tailcallcnt [ ... ] 64 bytes (64-bit powerpc) |
| * [ ] -- |
| * LR save area [ r0 save (64-bit) ] | header |
| * [ r0 save (32-bit) ] | |
| * dummy frame for unwind [ back chain 1 ] -- |
| * [ padding ] align stack frame |
| * r4_off [ r4 (tailcallcnt) ] optional - 32-bit powerpc |
| * alt_lr_off [ real lr (ool stub)] optional - actual lr |
| * [ r26 ] |
| * nvr_off [ r25 ] nvr save area |
| * retval_off [ return value ] |
| * [ reg argN ] |
| * [ ... ] |
| * regs_off [ reg_arg1 ] prog ctx context |
| * nregs_off [ args count ] |
| * ip_off [ traced function ] |
| * [ ... ] |
| * run_ctx_off [ bpf_tramp_run_ctx ] |
| * [ reg argN ] |
| * [ ... ] |
| * param_save_area [ reg_arg1 ] min 8 doublewords, per ABI |
| * [ TOC save (64-bit) ] -- |
| * [ LR save (64-bit) ] | header |
| * [ LR save (32-bit) ] | |
| * bpf trampoline frame [ back chain 2 ] -- |
| * |
| */ |
| |
| /* Minimum stack frame header */ |
| bpf_frame_size = STACK_FRAME_MIN_SIZE; |
| |
| /* |
| * Room for parameter save area. |
| * |
| * As per the ABI, this is required if we call into the traced |
| * function (BPF_TRAMP_F_CALL_ORIG): |
| * - if the function takes more than 8 arguments for the rest to spill onto the stack |
| * - or, if the function has variadic arguments |
| * - or, if this functions's prototype was not available to the caller |
| * |
| * Reserve space for at least 8 registers for now. This can be optimized later. |
| */ |
| bpf_frame_size += (nr_regs > 8 ? nr_regs : 8) * SZL; |
| |
| /* Room for struct bpf_tramp_run_ctx */ |
| run_ctx_off = bpf_frame_size; |
| bpf_frame_size += round_up(sizeof(struct bpf_tramp_run_ctx), SZL); |
| |
| /* Room for IP address argument */ |
| ip_off = bpf_frame_size; |
| if (flags & BPF_TRAMP_F_IP_ARG) |
| bpf_frame_size += SZL; |
| |
| /* Room for args count */ |
| nregs_off = bpf_frame_size; |
| bpf_frame_size += SZL; |
| |
| /* Room for args */ |
| regs_off = bpf_frame_size; |
| bpf_frame_size += nr_regs * SZL; |
| |
| /* Room for return value of func_addr or fentry prog */ |
| retval_off = bpf_frame_size; |
| save_ret = flags & (BPF_TRAMP_F_CALL_ORIG | BPF_TRAMP_F_RET_FENTRY_RET); |
| if (save_ret) |
| bpf_frame_size += SZL; |
| |
| /* Room for nvr save area */ |
| nvr_off = bpf_frame_size; |
| bpf_frame_size += 2 * SZL; |
| |
| /* Optional save area for actual LR in case of ool ftrace */ |
| if (IS_ENABLED(CONFIG_PPC_FTRACE_OUT_OF_LINE)) { |
| alt_lr_off = bpf_frame_size; |
| bpf_frame_size += SZL; |
| } |
| |
| if (IS_ENABLED(CONFIG_PPC32)) { |
| if (nr_regs < 2) { |
| r4_off = bpf_frame_size; |
| bpf_frame_size += SZL; |
| } else { |
| r4_off = regs_off + SZL; |
| } |
| } |
| |
| /* Padding to align stack frame, if any */ |
| bpf_frame_size = round_up(bpf_frame_size, SZL * 2); |
| |
| /* Dummy frame size for proper unwind - includes 64-bytes red zone for 64-bit powerpc */ |
| bpf_dummy_frame_size = STACK_FRAME_MIN_SIZE + 64; |
| |
| /* Offset to the traced function's stack frame */ |
| func_frame_offset = bpf_dummy_frame_size + bpf_frame_size; |
| |
| /* Create dummy frame for unwind, store original return value */ |
| EMIT(PPC_RAW_STL(_R0, _R1, PPC_LR_STKOFF)); |
| /* Protect red zone where tail call count goes */ |
| EMIT(PPC_RAW_STLU(_R1, _R1, -bpf_dummy_frame_size)); |
| |
| /* Create our stack frame */ |
| EMIT(PPC_RAW_STLU(_R1, _R1, -bpf_frame_size)); |
| |
| /* 64-bit: Save TOC and load kernel TOC */ |
| if (IS_ENABLED(CONFIG_PPC64_ELF_ABI_V2) && !IS_ENABLED(CONFIG_PPC_KERNEL_PCREL)) { |
| EMIT(PPC_RAW_STD(_R2, _R1, 24)); |
| PPC64_LOAD_PACA(); |
| } |
| |
| /* 32-bit: save tail call count in r4 */ |
| if (IS_ENABLED(CONFIG_PPC32) && nr_regs < 2) |
| EMIT(PPC_RAW_STL(_R4, _R1, r4_off)); |
| |
| bpf_trampoline_save_args(image, ctx, func_frame_offset, nr_regs, regs_off); |
| |
| /* Save our return address */ |
| EMIT(PPC_RAW_MFLR(_R3)); |
| if (IS_ENABLED(CONFIG_PPC_FTRACE_OUT_OF_LINE)) |
| EMIT(PPC_RAW_STL(_R3, _R1, alt_lr_off)); |
| else |
| EMIT(PPC_RAW_STL(_R3, _R1, bpf_frame_size + PPC_LR_STKOFF)); |
| |
| /* |
| * Save ip address of the traced function. |
| * We could recover this from LR, but we will need to address for OOL trampoline, |
| * and optional GEP area. |
| */ |
| if (IS_ENABLED(CONFIG_PPC_FTRACE_OUT_OF_LINE) || flags & BPF_TRAMP_F_IP_ARG) { |
| EMIT(PPC_RAW_LWZ(_R4, _R3, 4)); |
| EMIT(PPC_RAW_SLWI(_R4, _R4, 6)); |
| EMIT(PPC_RAW_SRAWI(_R4, _R4, 6)); |
| EMIT(PPC_RAW_ADD(_R3, _R3, _R4)); |
| EMIT(PPC_RAW_ADDI(_R3, _R3, 4)); |
| } |
| |
| if (flags & BPF_TRAMP_F_IP_ARG) |
| EMIT(PPC_RAW_STL(_R3, _R1, ip_off)); |
| |
| if (IS_ENABLED(CONFIG_PPC_FTRACE_OUT_OF_LINE)) |
| /* Fake our LR for unwind */ |
| EMIT(PPC_RAW_STL(_R3, _R1, bpf_frame_size + PPC_LR_STKOFF)); |
| |
| /* Save function arg count -- see bpf_get_func_arg_cnt() */ |
| EMIT(PPC_RAW_LI(_R3, nr_regs)); |
| EMIT(PPC_RAW_STL(_R3, _R1, nregs_off)); |
| |
| /* Save nv regs */ |
| EMIT(PPC_RAW_STL(_R25, _R1, nvr_off)); |
| EMIT(PPC_RAW_STL(_R26, _R1, nvr_off + SZL)); |
| |
| if (flags & BPF_TRAMP_F_CALL_ORIG) { |
| PPC_LI_ADDR(_R3, (unsigned long)im); |
| ret = bpf_jit_emit_func_call_rel(image, ro_image, ctx, |
| (unsigned long)__bpf_tramp_enter); |
| if (ret) |
| return ret; |
| } |
| |
| for (i = 0; i < fentry->nr_links; i++) |
| if (invoke_bpf_prog(image, ro_image, ctx, fentry->links[i], regs_off, retval_off, |
| run_ctx_off, flags & BPF_TRAMP_F_RET_FENTRY_RET)) |
| return -EINVAL; |
| |
| if (fmod_ret->nr_links) { |
| branches = kcalloc(fmod_ret->nr_links, sizeof(u32), GFP_KERNEL); |
| if (!branches) |
| return -ENOMEM; |
| |
| if (invoke_bpf_mod_ret(image, ro_image, ctx, fmod_ret, regs_off, retval_off, |
| run_ctx_off, branches)) { |
| ret = -EINVAL; |
| goto cleanup; |
| } |
| } |
| |
| /* Call the traced function */ |
| if (flags & BPF_TRAMP_F_CALL_ORIG) { |
| /* |
| * The address in LR save area points to the correct point in the original function |
| * with both PPC_FTRACE_OUT_OF_LINE as well as with traditional ftrace instruction |
| * sequence |
| */ |
| EMIT(PPC_RAW_LL(_R3, _R1, bpf_frame_size + PPC_LR_STKOFF)); |
| EMIT(PPC_RAW_MTCTR(_R3)); |
| |
| /* Replicate tail_call_cnt before calling the original BPF prog */ |
| if (flags & BPF_TRAMP_F_TAIL_CALL_CTX) |
| bpf_trampoline_setup_tail_call_cnt(image, ctx, func_frame_offset, r4_off); |
| |
| /* Restore args */ |
| bpf_trampoline_restore_args_stack(image, ctx, func_frame_offset, nr_regs, regs_off); |
| |
| /* Restore TOC for 64-bit */ |
| if (IS_ENABLED(CONFIG_PPC64_ELF_ABI_V2) && !IS_ENABLED(CONFIG_PPC_KERNEL_PCREL)) |
| EMIT(PPC_RAW_LD(_R2, _R1, 24)); |
| EMIT(PPC_RAW_BCTRL()); |
| if (IS_ENABLED(CONFIG_PPC64_ELF_ABI_V2) && !IS_ENABLED(CONFIG_PPC_KERNEL_PCREL)) |
| PPC64_LOAD_PACA(); |
| |
| /* Store return value for bpf prog to access */ |
| EMIT(PPC_RAW_STL(_R3, _R1, retval_off)); |
| |
| /* Restore updated tail_call_cnt */ |
| if (flags & BPF_TRAMP_F_TAIL_CALL_CTX) |
| bpf_trampoline_restore_tail_call_cnt(image, ctx, func_frame_offset, r4_off); |
| |
| /* Reserve space to patch branch instruction to skip fexit progs */ |
| if (ro_image) /* image is NULL for dummy pass */ |
| im->ip_after_call = &((u32 *)ro_image)[ctx->idx]; |
| EMIT(PPC_RAW_NOP()); |
| } |
| |
| /* Update branches saved in invoke_bpf_mod_ret with address of do_fexit */ |
| for (i = 0; i < fmod_ret->nr_links && image; i++) { |
| if (create_cond_branch(&branch_insn, &image[branches[i]], |
| (unsigned long)&image[ctx->idx], COND_NE << 16)) { |
| ret = -EINVAL; |
| goto cleanup; |
| } |
| |
| image[branches[i]] = ppc_inst_val(branch_insn); |
| } |
| |
| for (i = 0; i < fexit->nr_links; i++) |
| if (invoke_bpf_prog(image, ro_image, ctx, fexit->links[i], regs_off, retval_off, |
| run_ctx_off, false)) { |
| ret = -EINVAL; |
| goto cleanup; |
| } |
| |
| if (flags & BPF_TRAMP_F_CALL_ORIG) { |
| if (ro_image) /* image is NULL for dummy pass */ |
| im->ip_epilogue = &((u32 *)ro_image)[ctx->idx]; |
| PPC_LI_ADDR(_R3, im); |
| ret = bpf_jit_emit_func_call_rel(image, ro_image, ctx, |
| (unsigned long)__bpf_tramp_exit); |
| if (ret) |
| goto cleanup; |
| } |
| |
| if (flags & BPF_TRAMP_F_RESTORE_REGS) |
| bpf_trampoline_restore_args_regs(image, ctx, nr_regs, regs_off); |
| |
| /* Restore return value of func_addr or fentry prog */ |
| if (save_ret) |
| EMIT(PPC_RAW_LL(_R3, _R1, retval_off)); |
| |
| /* Restore nv regs */ |
| EMIT(PPC_RAW_LL(_R26, _R1, nvr_off + SZL)); |
| EMIT(PPC_RAW_LL(_R25, _R1, nvr_off)); |
| |
| /* Epilogue */ |
| if (IS_ENABLED(CONFIG_PPC64_ELF_ABI_V2) && !IS_ENABLED(CONFIG_PPC_KERNEL_PCREL)) |
| EMIT(PPC_RAW_LD(_R2, _R1, 24)); |
| if (flags & BPF_TRAMP_F_SKIP_FRAME) { |
| /* Skip the traced function and return to parent */ |
| EMIT(PPC_RAW_ADDI(_R1, _R1, func_frame_offset)); |
| EMIT(PPC_RAW_LL(_R0, _R1, PPC_LR_STKOFF)); |
| EMIT(PPC_RAW_MTLR(_R0)); |
| EMIT(PPC_RAW_BLR()); |
| } else { |
| if (IS_ENABLED(CONFIG_PPC_FTRACE_OUT_OF_LINE)) { |
| EMIT(PPC_RAW_LL(_R0, _R1, alt_lr_off)); |
| EMIT(PPC_RAW_MTLR(_R0)); |
| EMIT(PPC_RAW_ADDI(_R1, _R1, func_frame_offset)); |
| EMIT(PPC_RAW_LL(_R0, _R1, PPC_LR_STKOFF)); |
| EMIT(PPC_RAW_BLR()); |
| } else { |
| EMIT(PPC_RAW_LL(_R0, _R1, bpf_frame_size + PPC_LR_STKOFF)); |
| EMIT(PPC_RAW_MTCTR(_R0)); |
| EMIT(PPC_RAW_ADDI(_R1, _R1, func_frame_offset)); |
| EMIT(PPC_RAW_LL(_R0, _R1, PPC_LR_STKOFF)); |
| EMIT(PPC_RAW_MTLR(_R0)); |
| EMIT(PPC_RAW_BCTR()); |
| } |
| } |
| |
| /* Make sure the trampoline generation logic doesn't overflow */ |
| if (image && WARN_ON_ONCE(&image[ctx->idx] > (u32 *)rw_image_end - BPF_INSN_SAFETY)) { |
| ret = -EFAULT; |
| goto cleanup; |
| } |
| ret = ctx->idx * 4 + BPF_INSN_SAFETY * 4; |
| |
| cleanup: |
| kfree(branches); |
| return ret; |
| } |
| |
| int arch_bpf_trampoline_size(const struct btf_func_model *m, u32 flags, |
| struct bpf_tramp_links *tlinks, void *func_addr) |
| { |
| struct bpf_tramp_image im; |
| int ret; |
| |
| ret = __arch_prepare_bpf_trampoline(&im, NULL, NULL, NULL, m, flags, tlinks, func_addr); |
| return ret; |
| } |
| |
| int arch_prepare_bpf_trampoline(struct bpf_tramp_image *im, void *image, void *image_end, |
| const struct btf_func_model *m, u32 flags, |
| struct bpf_tramp_links *tlinks, |
| void *func_addr) |
| { |
| u32 size = image_end - image; |
| void *rw_image, *tmp; |
| int ret; |
| |
| /* |
| * rw_image doesn't need to be in module memory range, so we can |
| * use kvmalloc. |
| */ |
| rw_image = kvmalloc(size, GFP_KERNEL); |
| if (!rw_image) |
| return -ENOMEM; |
| |
| ret = __arch_prepare_bpf_trampoline(im, rw_image, rw_image + size, image, m, |
| flags, tlinks, func_addr); |
| if (ret < 0) |
| goto out; |
| |
| if (bpf_jit_enable > 1) |
| bpf_jit_dump(1, ret - BPF_INSN_SAFETY * 4, 1, rw_image); |
| |
| tmp = bpf_arch_text_copy(image, rw_image, size); |
| if (IS_ERR(tmp)) |
| ret = PTR_ERR(tmp); |
| |
| out: |
| kvfree(rw_image); |
| return ret; |
| } |
| |
| static int bpf_modify_inst(void *ip, ppc_inst_t old_inst, ppc_inst_t new_inst) |
| { |
| ppc_inst_t org_inst; |
| |
| if (copy_inst_from_kernel_nofault(&org_inst, ip)) { |
| pr_err("0x%lx: fetching instruction failed\n", (unsigned long)ip); |
| return -EFAULT; |
| } |
| |
| if (!ppc_inst_equal(org_inst, old_inst)) { |
| pr_err("0x%lx: expected (%08lx) != found (%08lx)\n", |
| (unsigned long)ip, ppc_inst_as_ulong(old_inst), ppc_inst_as_ulong(org_inst)); |
| return -EINVAL; |
| } |
| |
| if (ppc_inst_equal(old_inst, new_inst)) |
| return 0; |
| |
| return patch_instruction(ip, new_inst); |
| } |
| |
| static void do_isync(void *info __maybe_unused) |
| { |
| isync(); |
| } |
| |
| /* |
| * A 3-step process for bpf prog entry: |
| * 1. At bpf prog entry, a single nop/b: |
| * bpf_func: |
| * [nop|b] ool_stub |
| * 2. Out-of-line stub: |
| * ool_stub: |
| * mflr r0 |
| * [b|bl] <bpf_prog>/<long_branch_stub> |
| * mtlr r0 // CONFIG_PPC_FTRACE_OUT_OF_LINE only |
| * b bpf_func + 4 |
| * 3. Long branch stub: |
| * long_branch_stub: |
| * .long <branch_addr>/<dummy_tramp> |
| * mflr r11 |
| * bcl 20,31,$+4 |
| * mflr r12 |
| * ld r12, -16(r12) |
| * mtctr r12 |
| * mtlr r11 // needed to retain ftrace ABI |
| * bctr |
| * |
| * dummy_tramp is used to reduce synchronization requirements. |
| * |
| * When attaching a bpf trampoline to a bpf prog, we do not need any |
| * synchronization here since we always have a valid branch target regardless |
| * of the order in which the above stores are seen. dummy_tramp ensures that |
| * the long_branch stub goes to a valid destination on other cpus, even when |
| * the branch to the long_branch stub is seen before the updated trampoline |
| * address. |
| * |
| * However, when detaching a bpf trampoline from a bpf prog, or if changing |
| * the bpf trampoline address, we need synchronization to ensure that other |
| * cpus can no longer branch into the older trampoline so that it can be |
| * safely freed. bpf_tramp_image_put() uses rcu_tasks to ensure all cpus |
| * make forward progress, but we still need to ensure that other cpus |
| * execute isync (or some CSI) so that they don't go back into the |
| * trampoline again. |
| */ |
| int bpf_arch_text_poke(void *ip, enum bpf_text_poke_type poke_type, |
| void *old_addr, void *new_addr) |
| { |
| unsigned long bpf_func, bpf_func_end, size, offset; |
| ppc_inst_t old_inst, new_inst; |
| int ret = 0, branch_flags; |
| char name[KSYM_NAME_LEN]; |
| |
| if (IS_ENABLED(CONFIG_PPC32)) |
| return -EOPNOTSUPP; |
| |
| bpf_func = (unsigned long)ip; |
| branch_flags = poke_type == BPF_MOD_CALL ? BRANCH_SET_LINK : 0; |
| |
| /* We currently only support poking bpf programs */ |
| if (!__bpf_address_lookup(bpf_func, &size, &offset, name)) { |
| pr_err("%s (0x%lx): kernel/modules are not supported\n", __func__, bpf_func); |
| return -EOPNOTSUPP; |
| } |
| |
| /* |
| * If we are not poking at bpf prog entry, then we are simply patching in/out |
| * an unconditional branch instruction at im->ip_after_call |
| */ |
| if (offset) { |
| if (poke_type != BPF_MOD_JUMP) { |
| pr_err("%s (0x%lx): calls are not supported in bpf prog body\n", __func__, |
| bpf_func); |
| return -EOPNOTSUPP; |
| } |
| old_inst = ppc_inst(PPC_RAW_NOP()); |
| if (old_addr) |
| if (create_branch(&old_inst, ip, (unsigned long)old_addr, 0)) |
| return -ERANGE; |
| new_inst = ppc_inst(PPC_RAW_NOP()); |
| if (new_addr) |
| if (create_branch(&new_inst, ip, (unsigned long)new_addr, 0)) |
| return -ERANGE; |
| mutex_lock(&text_mutex); |
| ret = bpf_modify_inst(ip, old_inst, new_inst); |
| mutex_unlock(&text_mutex); |
| |
| /* Make sure all cpus see the new instruction */ |
| smp_call_function(do_isync, NULL, 1); |
| return ret; |
| } |
| |
| bpf_func_end = bpf_func + size; |
| |
| /* Address of the jmp/call instruction in the out-of-line stub */ |
| ip = (void *)(bpf_func_end - bpf_jit_ool_stub + 4); |
| |
| if (!is_offset_in_branch_range((long)ip - 4 - bpf_func)) { |
| pr_err("%s (0x%lx): bpf prog too large, ool stub out of branch range\n", __func__, |
| bpf_func); |
| return -ERANGE; |
| } |
| |
| old_inst = ppc_inst(PPC_RAW_NOP()); |
| if (old_addr) { |
| if (is_offset_in_branch_range(ip - old_addr)) |
| create_branch(&old_inst, ip, (unsigned long)old_addr, branch_flags); |
| else |
| create_branch(&old_inst, ip, bpf_func_end - bpf_jit_long_branch_stub, |
| branch_flags); |
| } |
| new_inst = ppc_inst(PPC_RAW_NOP()); |
| if (new_addr) { |
| if (is_offset_in_branch_range(ip - new_addr)) |
| create_branch(&new_inst, ip, (unsigned long)new_addr, branch_flags); |
| else |
| create_branch(&new_inst, ip, bpf_func_end - bpf_jit_long_branch_stub, |
| branch_flags); |
| } |
| |
| mutex_lock(&text_mutex); |
| |
| /* |
| * 1. Update the address in the long branch stub: |
| * If new_addr is out of range, we will have to use the long branch stub, so patch new_addr |
| * here. Otherwise, revert to dummy_tramp, but only if we had patched old_addr here. |
| */ |
| if ((new_addr && !is_offset_in_branch_range(new_addr - ip)) || |
| (old_addr && !is_offset_in_branch_range(old_addr - ip))) |
| ret = patch_ulong((void *)(bpf_func_end - bpf_jit_long_branch_stub - SZL), |
| (new_addr && !is_offset_in_branch_range(new_addr - ip)) ? |
| (unsigned long)new_addr : (unsigned long)dummy_tramp); |
| if (ret) |
| goto out; |
| |
| /* 2. Update the branch/call in the out-of-line stub */ |
| ret = bpf_modify_inst(ip, old_inst, new_inst); |
| if (ret) |
| goto out; |
| |
| /* 3. Update instruction at bpf prog entry */ |
| ip = (void *)bpf_func; |
| if (!old_addr || !new_addr) { |
| if (!old_addr) { |
| old_inst = ppc_inst(PPC_RAW_NOP()); |
| create_branch(&new_inst, ip, bpf_func_end - bpf_jit_ool_stub, 0); |
| } else { |
| new_inst = ppc_inst(PPC_RAW_NOP()); |
| create_branch(&old_inst, ip, bpf_func_end - bpf_jit_ool_stub, 0); |
| } |
| ret = bpf_modify_inst(ip, old_inst, new_inst); |
| } |
| |
| out: |
| mutex_unlock(&text_mutex); |
| |
| /* |
| * Sync only if we are not attaching a trampoline to a bpf prog so the older |
| * trampoline can be freed safely. |
| */ |
| if (old_addr) |
| smp_call_function(do_isync, NULL, 1); |
| |
| return ret; |
| } |