| // SPDX-License-Identifier: GPL-2.0+ |
| /* Copyright (c) 2017 NXP. */ |
| |
| #include <linux/bitfield.h> |
| #include <linux/clk.h> |
| #include <linux/delay.h> |
| #include <linux/io.h> |
| #include <linux/module.h> |
| #include <linux/of.h> |
| #include <linux/phy/phy.h> |
| #include <linux/platform_device.h> |
| #include <linux/regulator/consumer.h> |
| #include <linux/usb/typec_mux.h> |
| |
| #define PHY_CTRL0 0x0 |
| #define PHY_CTRL0_REF_SSP_EN BIT(2) |
| #define PHY_CTRL0_FSEL_MASK GENMASK(10, 5) |
| #define PHY_CTRL0_FSEL_24M 0x2a |
| |
| #define PHY_CTRL1 0x4 |
| #define PHY_CTRL1_RESET BIT(0) |
| #define PHY_CTRL1_COMMONONN BIT(1) |
| #define PHY_CTRL1_ATERESET BIT(3) |
| #define PHY_CTRL1_VDATSRCENB0 BIT(19) |
| #define PHY_CTRL1_VDATDETENB0 BIT(20) |
| |
| #define PHY_CTRL2 0x8 |
| #define PHY_CTRL2_TXENABLEN0 BIT(8) |
| #define PHY_CTRL2_OTG_DISABLE BIT(9) |
| |
| #define PHY_CTRL3 0xc |
| #define PHY_CTRL3_COMPDISTUNE_MASK GENMASK(2, 0) |
| #define PHY_CTRL3_TXPREEMP_TUNE_MASK GENMASK(16, 15) |
| #define PHY_CTRL3_TXRISE_TUNE_MASK GENMASK(21, 20) |
| #define PHY_CTRL3_TXVREF_TUNE_MASK GENMASK(25, 22) |
| #define PHY_CTRL3_TX_VBOOST_LEVEL_MASK GENMASK(31, 29) |
| |
| #define PHY_CTRL4 0x10 |
| #define PHY_CTRL4_PCS_TX_DEEMPH_3P5DB_MASK GENMASK(20, 15) |
| |
| #define PHY_CTRL5 0x14 |
| #define PHY_CTRL5_DMPWD_OVERRIDE_SEL BIT(23) |
| #define PHY_CTRL5_DMPWD_OVERRIDE BIT(22) |
| #define PHY_CTRL5_DPPWD_OVERRIDE_SEL BIT(21) |
| #define PHY_CTRL5_DPPWD_OVERRIDE BIT(20) |
| #define PHY_CTRL5_PCS_TX_SWING_FULL_MASK GENMASK(6, 0) |
| |
| #define PHY_CTRL6 0x18 |
| #define PHY_CTRL6_ALT_CLK_EN BIT(1) |
| #define PHY_CTRL6_ALT_CLK_SEL BIT(0) |
| |
| #define PHY_TUNE_DEFAULT 0xffffffff |
| |
| #define TCA_CLK_RST 0x00 |
| #define TCA_CLK_RST_SW BIT(9) |
| #define TCA_CLK_RST_REF_CLK_EN BIT(1) |
| #define TCA_CLK_RST_SUSPEND_CLK_EN BIT(0) |
| |
| #define TCA_INTR_EN 0x04 |
| #define TCA_INTR_STS 0x08 |
| |
| #define TCA_GCFG 0x10 |
| #define TCA_GCFG_ROLE_HSTDEV BIT(4) |
| #define TCA_GCFG_OP_MODE GENMASK(1, 0) |
| #define TCA_GCFG_OP_MODE_SYSMODE 0 |
| #define TCA_GCFG_OP_MODE_SYNCMODE 1 |
| |
| #define TCA_TCPC 0x14 |
| #define TCA_TCPC_VALID BIT(4) |
| #define TCA_TCPC_LOW_POWER_EN BIT(3) |
| #define TCA_TCPC_ORIENTATION_NORMAL BIT(2) |
| #define TCA_TCPC_MUX_CONTRL GENMASK(1, 0) |
| #define TCA_TCPC_MUX_CONTRL_NO_CONN 0 |
| #define TCA_TCPC_MUX_CONTRL_USB_CONN 1 |
| |
| #define TCA_SYSMODE_CFG 0x18 |
| #define TCA_SYSMODE_TCPC_DISABLE BIT(3) |
| #define TCA_SYSMODE_TCPC_FLIP BIT(2) |
| |
| #define TCA_CTRLSYNCMODE_CFG0 0x20 |
| #define TCA_CTRLSYNCMODE_CFG1 0x20 |
| |
| #define TCA_PSTATE 0x30 |
| #define TCA_PSTATE_CM_STS BIT(4) |
| #define TCA_PSTATE_TX_STS BIT(3) |
| #define TCA_PSTATE_RX_PLL_STS BIT(2) |
| #define TCA_PSTATE_PIPE0_POWER_DOWN GENMASK(1, 0) |
| |
| #define TCA_GEN_STATUS 0x34 |
| #define TCA_GEN_DEV_POR BIT(12) |
| #define TCA_GEN_REF_CLK_SEL BIT(8) |
| #define TCA_GEN_TYPEC_FLIP_INVERT BIT(4) |
| #define TCA_GEN_PHY_TYPEC_DISABLE BIT(3) |
| #define TCA_GEN_PHY_TYPEC_FLIP BIT(2) |
| |
| #define TCA_VBUS_CTRL 0x40 |
| #define TCA_VBUS_STATUS 0x44 |
| |
| #define TCA_INFO 0xfc |
| |
| struct tca_blk { |
| struct typec_switch_dev *sw; |
| void __iomem *base; |
| struct mutex mutex; |
| enum typec_orientation orientation; |
| }; |
| |
| struct imx8mq_usb_phy { |
| struct phy *phy; |
| struct clk *clk; |
| void __iomem *base; |
| struct regulator *vbus; |
| struct tca_blk *tca; |
| u32 pcs_tx_swing_full; |
| u32 pcs_tx_deemph_3p5db; |
| u32 tx_vref_tune; |
| u32 tx_rise_tune; |
| u32 tx_preemp_amp_tune; |
| u32 tx_vboost_level; |
| u32 comp_dis_tune; |
| }; |
| |
| |
| static void tca_blk_orientation_set(struct tca_blk *tca, |
| enum typec_orientation orientation); |
| |
| #ifdef CONFIG_TYPEC |
| |
| static int tca_blk_typec_switch_set(struct typec_switch_dev *sw, |
| enum typec_orientation orientation) |
| { |
| struct imx8mq_usb_phy *imx_phy = typec_switch_get_drvdata(sw); |
| struct tca_blk *tca = imx_phy->tca; |
| int ret; |
| |
| if (tca->orientation == orientation) |
| return 0; |
| |
| ret = clk_prepare_enable(imx_phy->clk); |
| if (ret) |
| return ret; |
| |
| tca_blk_orientation_set(tca, orientation); |
| clk_disable_unprepare(imx_phy->clk); |
| |
| return 0; |
| } |
| |
| static struct typec_switch_dev *tca_blk_get_typec_switch(struct platform_device *pdev, |
| struct imx8mq_usb_phy *imx_phy) |
| { |
| struct device *dev = &pdev->dev; |
| struct typec_switch_dev *sw; |
| struct typec_switch_desc sw_desc = { }; |
| |
| sw_desc.drvdata = imx_phy; |
| sw_desc.fwnode = dev->fwnode; |
| sw_desc.set = tca_blk_typec_switch_set; |
| sw_desc.name = NULL; |
| |
| sw = typec_switch_register(dev, &sw_desc); |
| if (IS_ERR(sw)) { |
| dev_err(dev, "Error register tca orientation switch: %ld", |
| PTR_ERR(sw)); |
| return NULL; |
| } |
| |
| return sw; |
| } |
| |
| static void tca_blk_put_typec_switch(struct typec_switch_dev *sw) |
| { |
| typec_switch_unregister(sw); |
| } |
| |
| #else |
| |
| static struct typec_switch_dev *tca_blk_get_typec_switch(struct platform_device *pdev, |
| struct imx8mq_usb_phy *imx_phy) |
| { |
| return NULL; |
| } |
| |
| static void tca_blk_put_typec_switch(struct typec_switch_dev *sw) {} |
| |
| #endif /* CONFIG_TYPEC */ |
| |
| static void tca_blk_orientation_set(struct tca_blk *tca, |
| enum typec_orientation orientation) |
| { |
| u32 val; |
| |
| mutex_lock(&tca->mutex); |
| |
| if (orientation == TYPEC_ORIENTATION_NONE) { |
| /* |
| * use Controller Synced Mode for TCA low power enable and |
| * put PHY to USB safe state. |
| */ |
| val = FIELD_PREP(TCA_GCFG_OP_MODE, TCA_GCFG_OP_MODE_SYNCMODE); |
| writel(val, tca->base + TCA_GCFG); |
| |
| val = TCA_TCPC_VALID | TCA_TCPC_LOW_POWER_EN; |
| writel(val, tca->base + TCA_TCPC); |
| |
| goto out; |
| } |
| |
| /* use System Configuration Mode for TCA mux control. */ |
| val = FIELD_PREP(TCA_GCFG_OP_MODE, TCA_GCFG_OP_MODE_SYSMODE); |
| writel(val, tca->base + TCA_GCFG); |
| |
| /* Disable TCA module */ |
| val = readl(tca->base + TCA_SYSMODE_CFG); |
| val |= TCA_SYSMODE_TCPC_DISABLE; |
| writel(val, tca->base + TCA_SYSMODE_CFG); |
| |
| if (orientation == TYPEC_ORIENTATION_REVERSE) |
| val |= TCA_SYSMODE_TCPC_FLIP; |
| else if (orientation == TYPEC_ORIENTATION_NORMAL) |
| val &= ~TCA_SYSMODE_TCPC_FLIP; |
| |
| writel(val, tca->base + TCA_SYSMODE_CFG); |
| |
| /* Enable TCA module */ |
| val &= ~TCA_SYSMODE_TCPC_DISABLE; |
| writel(val, tca->base + TCA_SYSMODE_CFG); |
| |
| out: |
| tca->orientation = orientation; |
| mutex_unlock(&tca->mutex); |
| } |
| |
| static void tca_blk_init(struct tca_blk *tca) |
| { |
| u32 val; |
| |
| /* reset XBar block */ |
| val = readl(tca->base + TCA_CLK_RST); |
| val &= ~TCA_CLK_RST_SW; |
| writel(val, tca->base + TCA_CLK_RST); |
| |
| udelay(100); |
| |
| /* clear reset */ |
| val |= TCA_CLK_RST_SW; |
| writel(val, tca->base + TCA_CLK_RST); |
| |
| tca_blk_orientation_set(tca, tca->orientation); |
| } |
| |
| static struct tca_blk *imx95_usb_phy_get_tca(struct platform_device *pdev, |
| struct imx8mq_usb_phy *imx_phy) |
| { |
| struct device *dev = &pdev->dev; |
| struct resource *res; |
| struct tca_blk *tca; |
| |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 1); |
| if (!res) |
| return NULL; |
| |
| tca = devm_kzalloc(dev, sizeof(*tca), GFP_KERNEL); |
| if (!tca) |
| return ERR_PTR(-ENOMEM); |
| |
| tca->base = devm_ioremap_resource(&pdev->dev, res); |
| if (IS_ERR(tca->base)) |
| return ERR_CAST(tca->base); |
| |
| mutex_init(&tca->mutex); |
| |
| tca->orientation = TYPEC_ORIENTATION_NORMAL; |
| tca->sw = tca_blk_get_typec_switch(pdev, imx_phy); |
| |
| return tca; |
| } |
| |
| static void imx95_usb_phy_put_tca(struct imx8mq_usb_phy *imx_phy) |
| { |
| struct tca_blk *tca = imx_phy->tca; |
| |
| if (!tca) |
| return; |
| |
| tca_blk_put_typec_switch(tca->sw); |
| } |
| |
| static u32 phy_tx_vref_tune_from_property(u32 percent) |
| { |
| percent = clamp(percent, 94U, 124U); |
| |
| return DIV_ROUND_CLOSEST(percent - 94U, 2); |
| } |
| |
| static u32 imx95_phy_tx_vref_tune_from_property(u32 percent) |
| { |
| percent = clamp(percent, 90U, 108U); |
| |
| switch (percent) { |
| case 90 ... 91: |
| percent = 0; |
| break; |
| case 92 ... 96: |
| percent -= 91; |
| break; |
| case 97 ... 104: |
| percent -= 92; |
| break; |
| case 105 ... 108: |
| percent -= 93; |
| break; |
| } |
| |
| return percent; |
| } |
| |
| static u32 phy_tx_rise_tune_from_property(u32 percent) |
| { |
| switch (percent) { |
| case 0 ... 98: |
| return 3; |
| case 99: |
| return 2; |
| case 100 ... 101: |
| return 1; |
| default: |
| return 0; |
| } |
| } |
| |
| static u32 imx95_phy_tx_rise_tune_from_property(u32 percent) |
| { |
| percent = clamp(percent, 90U, 120U); |
| |
| switch (percent) { |
| case 90 ... 99: |
| return 3; |
| case 101 ... 115: |
| return 1; |
| case 116 ... 120: |
| return 0; |
| default: |
| return 2; |
| } |
| } |
| |
| static u32 phy_tx_preemp_amp_tune_from_property(u32 microamp) |
| { |
| microamp = min(microamp, 1800U); |
| |
| return microamp / 600; |
| } |
| |
| static u32 phy_tx_vboost_level_from_property(u32 microvolt) |
| { |
| switch (microvolt) { |
| case 1156: |
| return 5; |
| case 844: |
| return 3; |
| default: |
| return 4; |
| } |
| } |
| |
| static u32 phy_pcs_tx_deemph_3p5db_from_property(u32 decibel) |
| { |
| return min(decibel, 36U); |
| } |
| |
| static u32 phy_comp_dis_tune_from_property(u32 percent) |
| { |
| switch (percent) { |
| case 0 ... 92: |
| return 0; |
| case 93 ... 95: |
| return 1; |
| case 96 ... 97: |
| return 2; |
| case 98 ... 102: |
| return 3; |
| case 103 ... 105: |
| return 4; |
| case 106 ... 109: |
| return 5; |
| case 110 ... 113: |
| return 6; |
| default: |
| return 7; |
| } |
| } |
| |
| static u32 imx95_phy_comp_dis_tune_from_property(u32 percent) |
| { |
| percent = clamp(percent, 94, 104); |
| |
| switch (percent) { |
| case 94 ... 95: |
| percent = 0; |
| break; |
| case 96 ... 98: |
| percent -= 95; |
| break; |
| case 99 ... 102: |
| percent -= 96; |
| break; |
| case 103 ... 104: |
| percent -= 97; |
| break; |
| } |
| |
| return percent; |
| } |
| |
| static u32 phy_pcs_tx_swing_full_from_property(u32 percent) |
| { |
| percent = min(percent, 100U); |
| |
| return (percent * 127) / 100; |
| } |
| |
| static void imx8m_get_phy_tuning_data(struct imx8mq_usb_phy *imx_phy) |
| { |
| struct device *dev = imx_phy->phy->dev.parent; |
| bool is_imx95 = false; |
| |
| if (device_is_compatible(dev, "fsl,imx95-usb-phy")) |
| is_imx95 = true; |
| |
| if (device_property_read_u32(dev, "fsl,phy-tx-vref-tune-percent", |
| &imx_phy->tx_vref_tune)) |
| imx_phy->tx_vref_tune = PHY_TUNE_DEFAULT; |
| else if (is_imx95) |
| imx_phy->tx_vref_tune = |
| imx95_phy_tx_vref_tune_from_property(imx_phy->tx_vref_tune); |
| else |
| imx_phy->tx_vref_tune = |
| phy_tx_vref_tune_from_property(imx_phy->tx_vref_tune); |
| |
| if (device_property_read_u32(dev, "fsl,phy-tx-rise-tune-percent", |
| &imx_phy->tx_rise_tune)) |
| imx_phy->tx_rise_tune = PHY_TUNE_DEFAULT; |
| else if (is_imx95) |
| imx_phy->tx_rise_tune = |
| imx95_phy_tx_rise_tune_from_property(imx_phy->tx_rise_tune); |
| else |
| imx_phy->tx_rise_tune = |
| phy_tx_rise_tune_from_property(imx_phy->tx_rise_tune); |
| |
| if (device_property_read_u32(dev, "fsl,phy-tx-preemp-amp-tune-microamp", |
| &imx_phy->tx_preemp_amp_tune)) |
| imx_phy->tx_preemp_amp_tune = PHY_TUNE_DEFAULT; |
| else |
| imx_phy->tx_preemp_amp_tune = |
| phy_tx_preemp_amp_tune_from_property(imx_phy->tx_preemp_amp_tune); |
| |
| if (device_property_read_u32(dev, "fsl,phy-tx-vboost-level-microvolt", |
| &imx_phy->tx_vboost_level)) |
| imx_phy->tx_vboost_level = PHY_TUNE_DEFAULT; |
| else |
| imx_phy->tx_vboost_level = |
| phy_tx_vboost_level_from_property(imx_phy->tx_vboost_level); |
| |
| if (device_property_read_u32(dev, "fsl,phy-comp-dis-tune-percent", |
| &imx_phy->comp_dis_tune)) |
| imx_phy->comp_dis_tune = PHY_TUNE_DEFAULT; |
| else if (is_imx95) |
| imx_phy->comp_dis_tune = |
| imx95_phy_comp_dis_tune_from_property(imx_phy->comp_dis_tune); |
| else |
| imx_phy->comp_dis_tune = |
| phy_comp_dis_tune_from_property(imx_phy->comp_dis_tune); |
| |
| if (device_property_read_u32(dev, "fsl,phy-pcs-tx-deemph-3p5db-attenuation-db", |
| &imx_phy->pcs_tx_deemph_3p5db)) |
| imx_phy->pcs_tx_deemph_3p5db = PHY_TUNE_DEFAULT; |
| else |
| imx_phy->pcs_tx_deemph_3p5db = |
| phy_pcs_tx_deemph_3p5db_from_property(imx_phy->pcs_tx_deemph_3p5db); |
| |
| if (device_property_read_u32(dev, "fsl,phy-pcs-tx-swing-full-percent", |
| &imx_phy->pcs_tx_swing_full)) |
| imx_phy->pcs_tx_swing_full = PHY_TUNE_DEFAULT; |
| else |
| imx_phy->pcs_tx_swing_full = |
| phy_pcs_tx_swing_full_from_property(imx_phy->pcs_tx_swing_full); |
| } |
| |
| static void imx8m_phy_tune(struct imx8mq_usb_phy *imx_phy) |
| { |
| u32 value; |
| |
| /* PHY tuning */ |
| if (imx_phy->pcs_tx_deemph_3p5db != PHY_TUNE_DEFAULT) { |
| value = readl(imx_phy->base + PHY_CTRL4); |
| value &= ~PHY_CTRL4_PCS_TX_DEEMPH_3P5DB_MASK; |
| value |= FIELD_PREP(PHY_CTRL4_PCS_TX_DEEMPH_3P5DB_MASK, |
| imx_phy->pcs_tx_deemph_3p5db); |
| writel(value, imx_phy->base + PHY_CTRL4); |
| } |
| |
| if (imx_phy->pcs_tx_swing_full != PHY_TUNE_DEFAULT) { |
| value = readl(imx_phy->base + PHY_CTRL5); |
| value |= FIELD_PREP(PHY_CTRL5_PCS_TX_SWING_FULL_MASK, |
| imx_phy->pcs_tx_swing_full); |
| writel(value, imx_phy->base + PHY_CTRL5); |
| } |
| |
| if ((imx_phy->tx_vref_tune & imx_phy->tx_rise_tune & |
| imx_phy->tx_preemp_amp_tune & imx_phy->comp_dis_tune & |
| imx_phy->tx_vboost_level) == PHY_TUNE_DEFAULT) |
| /* If all are the default values, no need update. */ |
| return; |
| |
| value = readl(imx_phy->base + PHY_CTRL3); |
| |
| if (imx_phy->tx_vref_tune != PHY_TUNE_DEFAULT) { |
| value &= ~PHY_CTRL3_TXVREF_TUNE_MASK; |
| value |= FIELD_PREP(PHY_CTRL3_TXVREF_TUNE_MASK, |
| imx_phy->tx_vref_tune); |
| } |
| |
| if (imx_phy->tx_rise_tune != PHY_TUNE_DEFAULT) { |
| value &= ~PHY_CTRL3_TXRISE_TUNE_MASK; |
| value |= FIELD_PREP(PHY_CTRL3_TXRISE_TUNE_MASK, |
| imx_phy->tx_rise_tune); |
| } |
| |
| if (imx_phy->tx_preemp_amp_tune != PHY_TUNE_DEFAULT) { |
| value &= ~PHY_CTRL3_TXPREEMP_TUNE_MASK; |
| value |= FIELD_PREP(PHY_CTRL3_TXPREEMP_TUNE_MASK, |
| imx_phy->tx_preemp_amp_tune); |
| } |
| |
| if (imx_phy->comp_dis_tune != PHY_TUNE_DEFAULT) { |
| value &= ~PHY_CTRL3_COMPDISTUNE_MASK; |
| value |= FIELD_PREP(PHY_CTRL3_COMPDISTUNE_MASK, |
| imx_phy->comp_dis_tune); |
| } |
| |
| if (imx_phy->tx_vboost_level != PHY_TUNE_DEFAULT) { |
| value &= ~PHY_CTRL3_TX_VBOOST_LEVEL_MASK; |
| value |= FIELD_PREP(PHY_CTRL3_TX_VBOOST_LEVEL_MASK, |
| imx_phy->tx_vboost_level); |
| } |
| |
| writel(value, imx_phy->base + PHY_CTRL3); |
| } |
| |
| static int imx8mq_usb_phy_init(struct phy *phy) |
| { |
| struct imx8mq_usb_phy *imx_phy = phy_get_drvdata(phy); |
| u32 value; |
| |
| value = readl(imx_phy->base + PHY_CTRL1); |
| value &= ~(PHY_CTRL1_VDATSRCENB0 | PHY_CTRL1_VDATDETENB0 | |
| PHY_CTRL1_COMMONONN); |
| value |= PHY_CTRL1_RESET | PHY_CTRL1_ATERESET; |
| writel(value, imx_phy->base + PHY_CTRL1); |
| |
| value = readl(imx_phy->base + PHY_CTRL0); |
| value |= PHY_CTRL0_REF_SSP_EN; |
| writel(value, imx_phy->base + PHY_CTRL0); |
| |
| value = readl(imx_phy->base + PHY_CTRL2); |
| value |= PHY_CTRL2_TXENABLEN0; |
| writel(value, imx_phy->base + PHY_CTRL2); |
| |
| value = readl(imx_phy->base + PHY_CTRL1); |
| value &= ~(PHY_CTRL1_RESET | PHY_CTRL1_ATERESET); |
| writel(value, imx_phy->base + PHY_CTRL1); |
| |
| return 0; |
| } |
| |
| static int imx8mp_usb_phy_init(struct phy *phy) |
| { |
| struct imx8mq_usb_phy *imx_phy = phy_get_drvdata(phy); |
| u32 value; |
| |
| /* USB3.0 PHY signal fsel for 24M ref */ |
| value = readl(imx_phy->base + PHY_CTRL0); |
| value &= ~PHY_CTRL0_FSEL_MASK; |
| value |= FIELD_PREP(PHY_CTRL0_FSEL_MASK, PHY_CTRL0_FSEL_24M); |
| writel(value, imx_phy->base + PHY_CTRL0); |
| |
| /* Disable alt_clk_en and use internal MPLL clocks */ |
| value = readl(imx_phy->base + PHY_CTRL6); |
| value &= ~(PHY_CTRL6_ALT_CLK_SEL | PHY_CTRL6_ALT_CLK_EN); |
| writel(value, imx_phy->base + PHY_CTRL6); |
| |
| value = readl(imx_phy->base + PHY_CTRL1); |
| value &= ~(PHY_CTRL1_VDATSRCENB0 | PHY_CTRL1_VDATDETENB0); |
| value |= PHY_CTRL1_RESET | PHY_CTRL1_ATERESET; |
| writel(value, imx_phy->base + PHY_CTRL1); |
| |
| value = readl(imx_phy->base + PHY_CTRL0); |
| value |= PHY_CTRL0_REF_SSP_EN; |
| writel(value, imx_phy->base + PHY_CTRL0); |
| |
| value = readl(imx_phy->base + PHY_CTRL2); |
| value |= PHY_CTRL2_TXENABLEN0 | PHY_CTRL2_OTG_DISABLE; |
| writel(value, imx_phy->base + PHY_CTRL2); |
| |
| udelay(10); |
| |
| value = readl(imx_phy->base + PHY_CTRL1); |
| value &= ~(PHY_CTRL1_RESET | PHY_CTRL1_ATERESET); |
| writel(value, imx_phy->base + PHY_CTRL1); |
| |
| imx8m_phy_tune(imx_phy); |
| |
| if (imx_phy->tca) |
| tca_blk_init(imx_phy->tca); |
| |
| return 0; |
| } |
| |
| static int imx8mq_phy_power_on(struct phy *phy) |
| { |
| struct imx8mq_usb_phy *imx_phy = phy_get_drvdata(phy); |
| int ret; |
| |
| ret = regulator_enable(imx_phy->vbus); |
| if (ret) |
| return ret; |
| |
| return clk_prepare_enable(imx_phy->clk); |
| } |
| |
| static int imx8mq_phy_power_off(struct phy *phy) |
| { |
| struct imx8mq_usb_phy *imx_phy = phy_get_drvdata(phy); |
| |
| clk_disable_unprepare(imx_phy->clk); |
| regulator_disable(imx_phy->vbus); |
| |
| return 0; |
| } |
| |
| static const struct phy_ops imx8mq_usb_phy_ops = { |
| .init = imx8mq_usb_phy_init, |
| .power_on = imx8mq_phy_power_on, |
| .power_off = imx8mq_phy_power_off, |
| .owner = THIS_MODULE, |
| }; |
| |
| static const struct phy_ops imx8mp_usb_phy_ops = { |
| .init = imx8mp_usb_phy_init, |
| .power_on = imx8mq_phy_power_on, |
| .power_off = imx8mq_phy_power_off, |
| .owner = THIS_MODULE, |
| }; |
| |
| static const struct of_device_id imx8mq_usb_phy_of_match[] = { |
| {.compatible = "fsl,imx8mq-usb-phy", |
| .data = &imx8mq_usb_phy_ops,}, |
| {.compatible = "fsl,imx8mp-usb-phy", |
| .data = &imx8mp_usb_phy_ops,}, |
| {.compatible = "fsl,imx95-usb-phy", |
| .data = &imx8mp_usb_phy_ops,}, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(of, imx8mq_usb_phy_of_match); |
| |
| static int imx8mq_usb_phy_probe(struct platform_device *pdev) |
| { |
| struct phy_provider *phy_provider; |
| struct device *dev = &pdev->dev; |
| struct imx8mq_usb_phy *imx_phy; |
| const struct phy_ops *phy_ops; |
| |
| imx_phy = devm_kzalloc(dev, sizeof(*imx_phy), GFP_KERNEL); |
| if (!imx_phy) |
| return -ENOMEM; |
| |
| imx_phy->clk = devm_clk_get(dev, "phy"); |
| if (IS_ERR(imx_phy->clk)) { |
| dev_err(dev, "failed to get imx8mq usb phy clock\n"); |
| return PTR_ERR(imx_phy->clk); |
| } |
| |
| imx_phy->base = devm_platform_ioremap_resource(pdev, 0); |
| if (IS_ERR(imx_phy->base)) |
| return PTR_ERR(imx_phy->base); |
| |
| phy_ops = of_device_get_match_data(dev); |
| if (!phy_ops) |
| return -EINVAL; |
| |
| imx_phy->phy = devm_phy_create(dev, NULL, phy_ops); |
| if (IS_ERR(imx_phy->phy)) |
| return PTR_ERR(imx_phy->phy); |
| |
| imx_phy->vbus = devm_regulator_get(dev, "vbus"); |
| if (IS_ERR(imx_phy->vbus)) |
| return dev_err_probe(dev, PTR_ERR(imx_phy->vbus), "failed to get vbus\n"); |
| |
| phy_set_drvdata(imx_phy->phy, imx_phy); |
| |
| imx_phy->tca = imx95_usb_phy_get_tca(pdev, imx_phy); |
| if (IS_ERR(imx_phy->tca)) |
| return dev_err_probe(dev, PTR_ERR(imx_phy->tca), |
| "failed to get tca\n"); |
| |
| imx8m_get_phy_tuning_data(imx_phy); |
| |
| phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); |
| |
| return PTR_ERR_OR_ZERO(phy_provider); |
| } |
| |
| static void imx8mq_usb_phy_remove(struct platform_device *pdev) |
| { |
| struct imx8mq_usb_phy *imx_phy = platform_get_drvdata(pdev); |
| |
| imx95_usb_phy_put_tca(imx_phy); |
| } |
| |
| static struct platform_driver imx8mq_usb_phy_driver = { |
| .probe = imx8mq_usb_phy_probe, |
| .remove = imx8mq_usb_phy_remove, |
| .driver = { |
| .name = "imx8mq-usb-phy", |
| .of_match_table = imx8mq_usb_phy_of_match, |
| } |
| }; |
| module_platform_driver(imx8mq_usb_phy_driver); |
| |
| MODULE_DESCRIPTION("FSL IMX8MQ USB PHY driver"); |
| MODULE_LICENSE("GPL"); |