| // SPDX-License-Identifier: GPL-2.0-or-later | 
 | /* | 
 |  * Copyright (C) 2019-2023 Oracle.  All Rights Reserved. | 
 |  * Author: Darrick J. Wong <djwong@kernel.org> | 
 |  */ | 
 | #include "xfs.h" | 
 | #include "xfs_fs.h" | 
 | #include "xfs_shared.h" | 
 | #include "xfs_format.h" | 
 | #include "xfs_trans_resv.h" | 
 | #include "xfs_log_format.h" | 
 | #include "xfs_trans.h" | 
 | #include "xfs_mount.h" | 
 | #include "xfs_alloc.h" | 
 | #include "xfs_ialloc.h" | 
 | #include "xfs_health.h" | 
 | #include "xfs_btree.h" | 
 | #include "xfs_ag.h" | 
 | #include "xfs_rtbitmap.h" | 
 | #include "xfs_inode.h" | 
 | #include "xfs_icache.h" | 
 | #include "scrub/scrub.h" | 
 | #include "scrub/common.h" | 
 | #include "scrub/trace.h" | 
 | #include "scrub/fscounters.h" | 
 |  | 
 | /* | 
 |  * FS Summary Counters | 
 |  * =================== | 
 |  * | 
 |  * The basics of filesystem summary counter checking are that we iterate the | 
 |  * AGs counting the number of free blocks, free space btree blocks, per-AG | 
 |  * reservations, inodes, delayed allocation reservations, and free inodes. | 
 |  * Then we compare what we computed against the in-core counters. | 
 |  * | 
 |  * However, the reality is that summary counters are a tricky beast to check. | 
 |  * While we /could/ freeze the filesystem and scramble around the AGs counting | 
 |  * the free blocks, in practice we prefer not do that for a scan because | 
 |  * freezing is costly.  To get around this, we added a per-cpu counter of the | 
 |  * delalloc reservations so that we can rotor around the AGs relatively | 
 |  * quickly, and we allow the counts to be slightly off because we're not taking | 
 |  * any locks while we do this. | 
 |  * | 
 |  * So the first thing we do is warm up the buffer cache in the setup routine by | 
 |  * walking all the AGs to make sure the incore per-AG structure has been | 
 |  * initialized.  The expected value calculation then iterates the incore per-AG | 
 |  * structures as quickly as it can.  We snapshot the percpu counters before and | 
 |  * after this operation and use the difference in counter values to guess at | 
 |  * our tolerance for mismatch between expected and actual counter values. | 
 |  */ | 
 |  | 
 | /* | 
 |  * Since the expected value computation is lockless but only browses incore | 
 |  * values, the percpu counters should be fairly close to each other.  However, | 
 |  * we'll allow ourselves to be off by at least this (arbitrary) amount. | 
 |  */ | 
 | #define XCHK_FSCOUNT_MIN_VARIANCE	(512) | 
 |  | 
 | /* | 
 |  * Make sure the per-AG structure has been initialized from the on-disk header | 
 |  * contents and trust that the incore counters match the ondisk counters.  (The | 
 |  * AGF and AGI scrubbers check them, and a normal xfs_scrub run checks the | 
 |  * summary counters after checking all AG headers).  Do this from the setup | 
 |  * function so that the inner AG aggregation loop runs as quickly as possible. | 
 |  * | 
 |  * This function runs during the setup phase /before/ we start checking any | 
 |  * metadata. | 
 |  */ | 
 | STATIC int | 
 | xchk_fscount_warmup( | 
 | 	struct xfs_scrub	*sc) | 
 | { | 
 | 	struct xfs_mount	*mp = sc->mp; | 
 | 	struct xfs_buf		*agi_bp = NULL; | 
 | 	struct xfs_buf		*agf_bp = NULL; | 
 | 	struct xfs_perag	*pag = NULL; | 
 | 	xfs_agnumber_t		agno; | 
 | 	int			error = 0; | 
 |  | 
 | 	for_each_perag(mp, agno, pag) { | 
 | 		if (xchk_should_terminate(sc, &error)) | 
 | 			break; | 
 | 		if (xfs_perag_initialised_agi(pag) && | 
 | 		    xfs_perag_initialised_agf(pag)) | 
 | 			continue; | 
 |  | 
 | 		/* Lock both AG headers. */ | 
 | 		error = xfs_ialloc_read_agi(pag, sc->tp, 0, &agi_bp); | 
 | 		if (error) | 
 | 			break; | 
 | 		error = xfs_alloc_read_agf(pag, sc->tp, 0, &agf_bp); | 
 | 		if (error) | 
 | 			break; | 
 |  | 
 | 		/* | 
 | 		 * These are supposed to be initialized by the header read | 
 | 		 * function. | 
 | 		 */ | 
 | 		if (!xfs_perag_initialised_agi(pag) || | 
 | 		    !xfs_perag_initialised_agf(pag)) { | 
 | 			error = -EFSCORRUPTED; | 
 | 			break; | 
 | 		} | 
 |  | 
 | 		xfs_buf_relse(agf_bp); | 
 | 		agf_bp = NULL; | 
 | 		xfs_buf_relse(agi_bp); | 
 | 		agi_bp = NULL; | 
 | 	} | 
 |  | 
 | 	if (agf_bp) | 
 | 		xfs_buf_relse(agf_bp); | 
 | 	if (agi_bp) | 
 | 		xfs_buf_relse(agi_bp); | 
 | 	if (pag) | 
 | 		xfs_perag_rele(pag); | 
 | 	return error; | 
 | } | 
 |  | 
 | static inline int | 
 | xchk_fsfreeze( | 
 | 	struct xfs_scrub	*sc) | 
 | { | 
 | 	int			error; | 
 |  | 
 | 	error = freeze_super(sc->mp->m_super, FREEZE_HOLDER_KERNEL); | 
 | 	trace_xchk_fsfreeze(sc, error); | 
 | 	return error; | 
 | } | 
 |  | 
 | static inline int | 
 | xchk_fsthaw( | 
 | 	struct xfs_scrub	*sc) | 
 | { | 
 | 	int			error; | 
 |  | 
 | 	/* This should always succeed, we have a kernel freeze */ | 
 | 	error = thaw_super(sc->mp->m_super, FREEZE_HOLDER_KERNEL); | 
 | 	trace_xchk_fsthaw(sc, error); | 
 | 	return error; | 
 | } | 
 |  | 
 | /* | 
 |  * We couldn't stabilize the filesystem long enough to sample all the variables | 
 |  * that comprise the summary counters and compare them to the percpu counters. | 
 |  * We need to disable all writer threads, which means taking the first two | 
 |  * freeze levels to put userspace to sleep, and the third freeze level to | 
 |  * prevent background threads from starting new transactions.  Take one level | 
 |  * more to prevent other callers from unfreezing the filesystem while we run. | 
 |  */ | 
 | STATIC int | 
 | xchk_fscounters_freeze( | 
 | 	struct xfs_scrub	*sc) | 
 | { | 
 | 	struct xchk_fscounters	*fsc = sc->buf; | 
 | 	int			error = 0; | 
 |  | 
 | 	if (sc->flags & XCHK_HAVE_FREEZE_PROT) { | 
 | 		sc->flags &= ~XCHK_HAVE_FREEZE_PROT; | 
 | 		mnt_drop_write_file(sc->file); | 
 | 	} | 
 |  | 
 | 	/* Try to grab a kernel freeze. */ | 
 | 	while ((error = xchk_fsfreeze(sc)) == -EBUSY) { | 
 | 		if (xchk_should_terminate(sc, &error)) | 
 | 			return error; | 
 |  | 
 | 		delay(HZ / 10); | 
 | 	} | 
 | 	if (error) | 
 | 		return error; | 
 |  | 
 | 	fsc->frozen = true; | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* Thaw the filesystem after checking or repairing fscounters. */ | 
 | STATIC void | 
 | xchk_fscounters_cleanup( | 
 | 	void			*buf) | 
 | { | 
 | 	struct xchk_fscounters	*fsc = buf; | 
 | 	struct xfs_scrub	*sc = fsc->sc; | 
 | 	int			error; | 
 |  | 
 | 	if (!fsc->frozen) | 
 | 		return; | 
 |  | 
 | 	error = xchk_fsthaw(sc); | 
 | 	if (error) | 
 | 		xfs_emerg(sc->mp, "still frozen after scrub, err=%d", error); | 
 | 	else | 
 | 		fsc->frozen = false; | 
 | } | 
 |  | 
 | int | 
 | xchk_setup_fscounters( | 
 | 	struct xfs_scrub	*sc) | 
 | { | 
 | 	struct xchk_fscounters	*fsc; | 
 | 	int			error; | 
 |  | 
 | 	/* | 
 | 	 * If the AGF doesn't track btreeblks, we have to lock the AGF to count | 
 | 	 * btree block usage by walking the actual btrees. | 
 | 	 */ | 
 | 	if (!xfs_has_lazysbcount(sc->mp)) | 
 | 		xchk_fsgates_enable(sc, XCHK_FSGATES_DRAIN); | 
 |  | 
 | 	sc->buf = kzalloc(sizeof(struct xchk_fscounters), XCHK_GFP_FLAGS); | 
 | 	if (!sc->buf) | 
 | 		return -ENOMEM; | 
 | 	sc->buf_cleanup = xchk_fscounters_cleanup; | 
 | 	fsc = sc->buf; | 
 | 	fsc->sc = sc; | 
 |  | 
 | 	xfs_icount_range(sc->mp, &fsc->icount_min, &fsc->icount_max); | 
 |  | 
 | 	/* We must get the incore counters set up before we can proceed. */ | 
 | 	error = xchk_fscount_warmup(sc); | 
 | 	if (error) | 
 | 		return error; | 
 |  | 
 | 	/* | 
 | 	 * Pause all writer activity in the filesystem while we're scrubbing to | 
 | 	 * reduce the likelihood of background perturbations to the counters | 
 | 	 * throwing off our calculations. | 
 | 	 * | 
 | 	 * If we're repairing, we need to prevent any other thread from | 
 | 	 * changing the global fs summary counters while we're repairing them. | 
 | 	 * This requires the fs to be frozen, which will disable background | 
 | 	 * reclaim and purge all inactive inodes. | 
 | 	 */ | 
 | 	if ((sc->flags & XCHK_TRY_HARDER) || xchk_could_repair(sc)) { | 
 | 		error = xchk_fscounters_freeze(sc); | 
 | 		if (error) | 
 | 			return error; | 
 | 	} | 
 |  | 
 | 	return xchk_trans_alloc_empty(sc); | 
 | } | 
 |  | 
 | /* | 
 |  * Part 1: Collecting filesystem summary counts.  For each AG, we add its | 
 |  * summary counts (total inodes, free inodes, free data blocks) to an incore | 
 |  * copy of the overall filesystem summary counts. | 
 |  * | 
 |  * To avoid false corruption reports in part 2, any failure in this part must | 
 |  * set the INCOMPLETE flag even when a negative errno is returned.  This care | 
 |  * must be taken with certain errno values (i.e. EFSBADCRC, EFSCORRUPTED, | 
 |  * ECANCELED) that are absorbed into a scrub state flag update by | 
 |  * xchk_*_process_error.  Scrub and repair share the same incore data | 
 |  * structures, so the INCOMPLETE flag is critical to prevent a repair based on | 
 |  * insufficient information. | 
 |  */ | 
 |  | 
 | /* Count free space btree blocks manually for pre-lazysbcount filesystems. */ | 
 | static int | 
 | xchk_fscount_btreeblks( | 
 | 	struct xfs_scrub	*sc, | 
 | 	struct xchk_fscounters	*fsc, | 
 | 	xfs_agnumber_t		agno) | 
 | { | 
 | 	xfs_extlen_t		blocks; | 
 | 	int			error; | 
 |  | 
 | 	error = xchk_ag_init_existing(sc, agno, &sc->sa); | 
 | 	if (error) | 
 | 		goto out_free; | 
 |  | 
 | 	error = xfs_btree_count_blocks(sc->sa.bno_cur, &blocks); | 
 | 	if (error) | 
 | 		goto out_free; | 
 | 	fsc->fdblocks += blocks - 1; | 
 |  | 
 | 	error = xfs_btree_count_blocks(sc->sa.cnt_cur, &blocks); | 
 | 	if (error) | 
 | 		goto out_free; | 
 | 	fsc->fdblocks += blocks - 1; | 
 |  | 
 | out_free: | 
 | 	xchk_ag_free(sc, &sc->sa); | 
 | 	return error; | 
 | } | 
 |  | 
 | /* | 
 |  * Calculate what the global in-core counters ought to be from the incore | 
 |  * per-AG structure.  Callers can compare this to the actual in-core counters | 
 |  * to estimate by how much both in-core and on-disk counters need to be | 
 |  * adjusted. | 
 |  */ | 
 | STATIC int | 
 | xchk_fscount_aggregate_agcounts( | 
 | 	struct xfs_scrub	*sc, | 
 | 	struct xchk_fscounters	*fsc) | 
 | { | 
 | 	struct xfs_mount	*mp = sc->mp; | 
 | 	struct xfs_perag	*pag; | 
 | 	uint64_t		delayed; | 
 | 	xfs_agnumber_t		agno; | 
 | 	int			tries = 8; | 
 | 	int			error = 0; | 
 |  | 
 | retry: | 
 | 	fsc->icount = 0; | 
 | 	fsc->ifree = 0; | 
 | 	fsc->fdblocks = 0; | 
 |  | 
 | 	for_each_perag(mp, agno, pag) { | 
 | 		if (xchk_should_terminate(sc, &error)) | 
 | 			break; | 
 |  | 
 | 		/* This somehow got unset since the warmup? */ | 
 | 		if (!xfs_perag_initialised_agi(pag) || | 
 | 		    !xfs_perag_initialised_agf(pag)) { | 
 | 			error = -EFSCORRUPTED; | 
 | 			break; | 
 | 		} | 
 |  | 
 | 		/* Count all the inodes */ | 
 | 		fsc->icount += pag->pagi_count; | 
 | 		fsc->ifree += pag->pagi_freecount; | 
 |  | 
 | 		/* Add up the free/freelist/bnobt/cntbt blocks */ | 
 | 		fsc->fdblocks += pag->pagf_freeblks; | 
 | 		fsc->fdblocks += pag->pagf_flcount; | 
 | 		if (xfs_has_lazysbcount(sc->mp)) { | 
 | 			fsc->fdblocks += pag->pagf_btreeblks; | 
 | 		} else { | 
 | 			error = xchk_fscount_btreeblks(sc, fsc, agno); | 
 | 			if (error) | 
 | 				break; | 
 | 		} | 
 |  | 
 | 		/* | 
 | 		 * Per-AG reservations are taken out of the incore counters, | 
 | 		 * so they must be left out of the free blocks computation. | 
 | 		 */ | 
 | 		fsc->fdblocks -= pag->pag_meta_resv.ar_reserved; | 
 | 		fsc->fdblocks -= pag->pag_rmapbt_resv.ar_orig_reserved; | 
 |  | 
 | 	} | 
 | 	if (pag) | 
 | 		xfs_perag_rele(pag); | 
 | 	if (error) { | 
 | 		xchk_set_incomplete(sc); | 
 | 		return error; | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * The global incore space reservation is taken from the incore | 
 | 	 * counters, so leave that out of the computation. | 
 | 	 */ | 
 | 	fsc->fdblocks -= mp->m_resblks_avail; | 
 |  | 
 | 	/* | 
 | 	 * Delayed allocation reservations are taken out of the incore counters | 
 | 	 * but not recorded on disk, so leave them and their indlen blocks out | 
 | 	 * of the computation. | 
 | 	 */ | 
 | 	delayed = percpu_counter_sum(&mp->m_delalloc_blks); | 
 | 	fsc->fdblocks -= delayed; | 
 |  | 
 | 	trace_xchk_fscounters_calc(mp, fsc->icount, fsc->ifree, fsc->fdblocks, | 
 | 			delayed); | 
 |  | 
 |  | 
 | 	/* Bail out if the values we compute are totally nonsense. */ | 
 | 	if (fsc->icount < fsc->icount_min || fsc->icount > fsc->icount_max || | 
 | 	    fsc->fdblocks > mp->m_sb.sb_dblocks || | 
 | 	    fsc->ifree > fsc->icount_max) | 
 | 		return -EFSCORRUPTED; | 
 |  | 
 | 	/* | 
 | 	 * If ifree > icount then we probably had some perturbation in the | 
 | 	 * counters while we were calculating things.  We'll try a few times | 
 | 	 * to maintain ifree <= icount before giving up. | 
 | 	 */ | 
 | 	if (fsc->ifree > fsc->icount) { | 
 | 		if (tries--) | 
 | 			goto retry; | 
 | 		return -EDEADLOCK; | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | #ifdef CONFIG_XFS_RT | 
 | STATIC int | 
 | xchk_fscount_add_frextent( | 
 | 	struct xfs_mount		*mp, | 
 | 	struct xfs_trans		*tp, | 
 | 	const struct xfs_rtalloc_rec	*rec, | 
 | 	void				*priv) | 
 | { | 
 | 	struct xchk_fscounters		*fsc = priv; | 
 | 	int				error = 0; | 
 |  | 
 | 	fsc->frextents += rec->ar_extcount; | 
 |  | 
 | 	xchk_should_terminate(fsc->sc, &error); | 
 | 	return error; | 
 | } | 
 |  | 
 | /* Calculate the number of free realtime extents from the realtime bitmap. */ | 
 | STATIC int | 
 | xchk_fscount_count_frextents( | 
 | 	struct xfs_scrub	*sc, | 
 | 	struct xchk_fscounters	*fsc) | 
 | { | 
 | 	struct xfs_mount	*mp = sc->mp; | 
 | 	int			error; | 
 |  | 
 | 	fsc->frextents = 0; | 
 | 	fsc->frextents_delayed = 0; | 
 | 	if (!xfs_has_realtime(mp)) | 
 | 		return 0; | 
 |  | 
 | 	xfs_rtbitmap_lock_shared(sc->mp, XFS_RBMLOCK_BITMAP); | 
 | 	error = xfs_rtalloc_query_all(sc->mp, sc->tp, | 
 | 			xchk_fscount_add_frextent, fsc); | 
 | 	if (error) { | 
 | 		xchk_set_incomplete(sc); | 
 | 		goto out_unlock; | 
 | 	} | 
 |  | 
 | 	fsc->frextents_delayed = percpu_counter_sum(&mp->m_delalloc_rtextents); | 
 |  | 
 | out_unlock: | 
 | 	xfs_rtbitmap_unlock_shared(sc->mp, XFS_RBMLOCK_BITMAP); | 
 | 	return error; | 
 | } | 
 | #else | 
 | STATIC int | 
 | xchk_fscount_count_frextents( | 
 | 	struct xfs_scrub	*sc, | 
 | 	struct xchk_fscounters	*fsc) | 
 | { | 
 | 	fsc->frextents = 0; | 
 | 	fsc->frextents_delayed = 0; | 
 | 	return 0; | 
 | } | 
 | #endif /* CONFIG_XFS_RT */ | 
 |  | 
 | /* | 
 |  * Part 2: Comparing filesystem summary counters.  All we have to do here is | 
 |  * sum the percpu counters and compare them to what we've observed. | 
 |  */ | 
 |  | 
 | /* | 
 |  * Is the @counter reasonably close to the @expected value? | 
 |  * | 
 |  * We neither locked nor froze anything in the filesystem while aggregating the | 
 |  * per-AG data to compute the @expected value, which means that the counter | 
 |  * could have changed.  We know the @old_value of the summation of the counter | 
 |  * before the aggregation, and we re-sum the counter now.  If the expected | 
 |  * value falls between the two summations, we're ok. | 
 |  * | 
 |  * Otherwise, we /might/ have a problem.  If the change in the summations is | 
 |  * more than we want to tolerate, the filesystem is probably busy and we should | 
 |  * just send back INCOMPLETE and see if userspace will try again. | 
 |  * | 
 |  * If we're repairing then we require an exact match. | 
 |  */ | 
 | static inline bool | 
 | xchk_fscount_within_range( | 
 | 	struct xfs_scrub	*sc, | 
 | 	const int64_t		old_value, | 
 | 	struct percpu_counter	*counter, | 
 | 	uint64_t		expected) | 
 | { | 
 | 	int64_t			min_value, max_value; | 
 | 	int64_t			curr_value = percpu_counter_sum(counter); | 
 |  | 
 | 	trace_xchk_fscounters_within_range(sc->mp, expected, curr_value, | 
 | 			old_value); | 
 |  | 
 | 	/* Negative values are always wrong. */ | 
 | 	if (curr_value < 0) | 
 | 		return false; | 
 |  | 
 | 	/* Exact matches are always ok. */ | 
 | 	if (curr_value == expected) | 
 | 		return true; | 
 |  | 
 | 	/* We require exact matches when repair is running. */ | 
 | 	if (sc->sm->sm_flags & XFS_SCRUB_IFLAG_REPAIR) | 
 | 		return false; | 
 |  | 
 | 	min_value = min(old_value, curr_value); | 
 | 	max_value = max(old_value, curr_value); | 
 |  | 
 | 	/* Within the before-and-after range is ok. */ | 
 | 	if (expected >= min_value && expected <= max_value) | 
 | 		return true; | 
 |  | 
 | 	/* Everything else is bad. */ | 
 | 	return false; | 
 | } | 
 |  | 
 | /* Check the superblock counters. */ | 
 | int | 
 | xchk_fscounters( | 
 | 	struct xfs_scrub	*sc) | 
 | { | 
 | 	struct xfs_mount	*mp = sc->mp; | 
 | 	struct xchk_fscounters	*fsc = sc->buf; | 
 | 	int64_t			icount, ifree, fdblocks, frextents; | 
 | 	bool			try_again = false; | 
 | 	int			error; | 
 |  | 
 | 	/* Snapshot the percpu counters. */ | 
 | 	icount = percpu_counter_sum(&mp->m_icount); | 
 | 	ifree = percpu_counter_sum(&mp->m_ifree); | 
 | 	fdblocks = percpu_counter_sum(&mp->m_fdblocks); | 
 | 	frextents = percpu_counter_sum(&mp->m_frextents); | 
 |  | 
 | 	/* No negative values, please! */ | 
 | 	if (icount < 0 || ifree < 0) | 
 | 		xchk_set_corrupt(sc); | 
 |  | 
 | 	/* | 
 | 	 * If the filesystem is not frozen, the counter summation calls above | 
 | 	 * can race with xfs_dec_freecounter, which subtracts a requested space | 
 | 	 * reservation from the counter and undoes the subtraction if that made | 
 | 	 * the counter go negative.  Therefore, it's possible to see negative | 
 | 	 * values here, and we should only flag that as a corruption if we | 
 | 	 * froze the fs.  This is much more likely to happen with frextents | 
 | 	 * since there are no reserved pools. | 
 | 	 */ | 
 | 	if (fdblocks < 0 || frextents < 0) { | 
 | 		if (!fsc->frozen) | 
 | 			return -EDEADLOCK; | 
 |  | 
 | 		xchk_set_corrupt(sc); | 
 | 		return 0; | 
 | 	} | 
 |  | 
 | 	/* See if icount is obviously wrong. */ | 
 | 	if (icount < fsc->icount_min || icount > fsc->icount_max) | 
 | 		xchk_set_corrupt(sc); | 
 |  | 
 | 	/* See if fdblocks is obviously wrong. */ | 
 | 	if (fdblocks > mp->m_sb.sb_dblocks) | 
 | 		xchk_set_corrupt(sc); | 
 |  | 
 | 	/* See if frextents is obviously wrong. */ | 
 | 	if (frextents > mp->m_sb.sb_rextents) | 
 | 		xchk_set_corrupt(sc); | 
 |  | 
 | 	/* | 
 | 	 * If ifree exceeds icount by more than the minimum variance then | 
 | 	 * something's probably wrong with the counters. | 
 | 	 */ | 
 | 	if (ifree > icount && ifree - icount > XCHK_FSCOUNT_MIN_VARIANCE) | 
 | 		xchk_set_corrupt(sc); | 
 |  | 
 | 	/* Walk the incore AG headers to calculate the expected counters. */ | 
 | 	error = xchk_fscount_aggregate_agcounts(sc, fsc); | 
 | 	if (!xchk_process_error(sc, 0, XFS_SB_BLOCK(mp), &error)) | 
 | 		return error; | 
 |  | 
 | 	/* Count the free extents counter for rt volumes. */ | 
 | 	error = xchk_fscount_count_frextents(sc, fsc); | 
 | 	if (!xchk_process_error(sc, 0, XFS_SB_BLOCK(mp), &error)) | 
 | 		return error; | 
 | 	if (sc->sm->sm_flags & XFS_SCRUB_OFLAG_INCOMPLETE) | 
 | 		return 0; | 
 |  | 
 | 	/* | 
 | 	 * Compare the in-core counters with whatever we counted.  If the fs is | 
 | 	 * frozen, we treat the discrepancy as a corruption because the freeze | 
 | 	 * should have stabilized the counter values.  Otherwise, we need | 
 | 	 * userspace to call us back having granted us freeze permission. | 
 | 	 */ | 
 | 	if (!xchk_fscount_within_range(sc, icount, &mp->m_icount, | 
 | 				fsc->icount)) { | 
 | 		if (fsc->frozen) | 
 | 			xchk_set_corrupt(sc); | 
 | 		else | 
 | 			try_again = true; | 
 | 	} | 
 |  | 
 | 	if (!xchk_fscount_within_range(sc, ifree, &mp->m_ifree, fsc->ifree)) { | 
 | 		if (fsc->frozen) | 
 | 			xchk_set_corrupt(sc); | 
 | 		else | 
 | 			try_again = true; | 
 | 	} | 
 |  | 
 | 	if (!xchk_fscount_within_range(sc, fdblocks, &mp->m_fdblocks, | 
 | 			fsc->fdblocks)) { | 
 | 		if (fsc->frozen) | 
 | 			xchk_set_corrupt(sc); | 
 | 		else | 
 | 			try_again = true; | 
 | 	} | 
 |  | 
 | 	if (!xchk_fscount_within_range(sc, frextents, &mp->m_frextents, | 
 | 			fsc->frextents - fsc->frextents_delayed)) { | 
 | 		if (fsc->frozen) | 
 | 			xchk_set_corrupt(sc); | 
 | 		else | 
 | 			try_again = true; | 
 | 	} | 
 |  | 
 | 	if (try_again) | 
 | 		return -EDEADLOCK; | 
 |  | 
 | 	return 0; | 
 | } |