| /* SPDX-License-Identifier: LGPL-2.1 OR MIT */ | |
| /* | |
| * minimal stdio function definitions for NOLIBC | |
| * Copyright (C) 2017-2021 Willy Tarreau <w@1wt.eu> | |
| */ | |
| #ifndef _NOLIBC_STDIO_H | |
| #define _NOLIBC_STDIO_H | |
| #include "std.h" | |
| #include "arch.h" | |
| #include "errno.h" | |
| #include "types.h" | |
| #include "sys.h" | |
| #include "stdarg.h" | |
| #include "stdlib.h" | |
| #include "string.h" | |
| #ifndef EOF | |
| #define EOF (-1) | |
| #endif | |
| /* Buffering mode used by setvbuf. */ | |
| #define _IOFBF 0 /* Fully buffered. */ | |
| #define _IOLBF 1 /* Line buffered. */ | |
| #define _IONBF 2 /* No buffering. */ | |
| /* just define FILE as a non-empty type. The value of the pointer gives | |
| * the FD: FILE=~fd for fd>=0 or NULL for fd<0. This way positive FILE | |
| * are immediately identified as abnormal entries (i.e. possible copies | |
| * of valid pointers to something else). | |
| */ | |
| typedef struct FILE { | |
| char dummy[1]; | |
| } FILE; | |
| static __attribute__((unused)) FILE* const stdin = (FILE*)(intptr_t)~STDIN_FILENO; | |
| static __attribute__((unused)) FILE* const stdout = (FILE*)(intptr_t)~STDOUT_FILENO; | |
| static __attribute__((unused)) FILE* const stderr = (FILE*)(intptr_t)~STDERR_FILENO; | |
| /* provides a FILE* equivalent of fd. The mode is ignored. */ | |
| static __attribute__((unused)) | |
| FILE *fdopen(int fd, const char *mode __attribute__((unused))) | |
| { | |
| if (fd < 0) { | |
| SET_ERRNO(EBADF); | |
| return NULL; | |
| } | |
| return (FILE*)(intptr_t)~fd; | |
| } | |
| /* provides the fd of stream. */ | |
| static __attribute__((unused)) | |
| int fileno(FILE *stream) | |
| { | |
| intptr_t i = (intptr_t)stream; | |
| if (i >= 0) { | |
| SET_ERRNO(EBADF); | |
| return -1; | |
| } | |
| return ~i; | |
| } | |
| /* flush a stream. */ | |
| static __attribute__((unused)) | |
| int fflush(FILE *stream) | |
| { | |
| intptr_t i = (intptr_t)stream; | |
| /* NULL is valid here. */ | |
| if (i > 0) { | |
| SET_ERRNO(EBADF); | |
| return -1; | |
| } | |
| /* Don't do anything, nolibc does not support buffering. */ | |
| return 0; | |
| } | |
| /* flush a stream. */ | |
| static __attribute__((unused)) | |
| int fclose(FILE *stream) | |
| { | |
| intptr_t i = (intptr_t)stream; | |
| if (i >= 0) { | |
| SET_ERRNO(EBADF); | |
| return -1; | |
| } | |
| if (close(~i)) | |
| return EOF; | |
| return 0; | |
| } | |
| /* getc(), fgetc(), getchar() */ | |
| #define getc(stream) fgetc(stream) | |
| static __attribute__((unused)) | |
| int fgetc(FILE* stream) | |
| { | |
| unsigned char ch; | |
| if (read(fileno(stream), &ch, 1) <= 0) | |
| return EOF; | |
| return ch; | |
| } | |
| static __attribute__((unused)) | |
| int getchar(void) | |
| { | |
| return fgetc(stdin); | |
| } | |
| /* putc(), fputc(), putchar() */ | |
| #define putc(c, stream) fputc(c, stream) | |
| static __attribute__((unused)) | |
| int fputc(int c, FILE* stream) | |
| { | |
| unsigned char ch = c; | |
| if (write(fileno(stream), &ch, 1) <= 0) | |
| return EOF; | |
| return ch; | |
| } | |
| static __attribute__((unused)) | |
| int putchar(int c) | |
| { | |
| return fputc(c, stdout); | |
| } | |
| /* fwrite(), puts(), fputs(). Note that puts() emits '\n' but not fputs(). */ | |
| /* internal fwrite()-like function which only takes a size and returns 0 on | |
| * success or EOF on error. It automatically retries on short writes. | |
| */ | |
| static __attribute__((unused)) | |
| int _fwrite(const void *buf, size_t size, FILE *stream) | |
| { | |
| ssize_t ret; | |
| int fd = fileno(stream); | |
| while (size) { | |
| ret = write(fd, buf, size); | |
| if (ret <= 0) | |
| return EOF; | |
| size -= ret; | |
| buf += ret; | |
| } | |
| return 0; | |
| } | |
| static __attribute__((unused)) | |
| size_t fwrite(const void *s, size_t size, size_t nmemb, FILE *stream) | |
| { | |
| size_t written; | |
| for (written = 0; written < nmemb; written++) { | |
| if (_fwrite(s, size, stream) != 0) | |
| break; | |
| s += size; | |
| } | |
| return written; | |
| } | |
| static __attribute__((unused)) | |
| int fputs(const char *s, FILE *stream) | |
| { | |
| return _fwrite(s, strlen(s), stream); | |
| } | |
| static __attribute__((unused)) | |
| int puts(const char *s) | |
| { | |
| if (fputs(s, stdout) == EOF) | |
| return EOF; | |
| return putchar('\n'); | |
| } | |
| /* fgets() */ | |
| static __attribute__((unused)) | |
| char *fgets(char *s, int size, FILE *stream) | |
| { | |
| int ofs; | |
| int c; | |
| for (ofs = 0; ofs + 1 < size;) { | |
| c = fgetc(stream); | |
| if (c == EOF) | |
| break; | |
| s[ofs++] = c; | |
| if (c == '\n') | |
| break; | |
| } | |
| if (ofs < size) | |
| s[ofs] = 0; | |
| return ofs ? s : NULL; | |
| } | |
| /* minimal vfprintf(). It supports the following formats: | |
| * - %[l*]{d,u,c,x,p} | |
| * - %s | |
| * - unknown modifiers are ignored. | |
| */ | |
| static __attribute__((unused, format(printf, 2, 0))) | |
| int vfprintf(FILE *stream, const char *fmt, va_list args) | |
| { | |
| char escape, lpref, c; | |
| unsigned long long v; | |
| unsigned int written; | |
| size_t len, ofs; | |
| char tmpbuf[21]; | |
| const char *outstr; | |
| written = ofs = escape = lpref = 0; | |
| while (1) { | |
| c = fmt[ofs++]; | |
| if (escape) { | |
| /* we're in an escape sequence, ofs == 1 */ | |
| escape = 0; | |
| if (c == 'c' || c == 'd' || c == 'u' || c == 'x' || c == 'p') { | |
| char *out = tmpbuf; | |
| if (c == 'p') | |
| v = va_arg(args, unsigned long); | |
| else if (lpref) { | |
| if (lpref > 1) | |
| v = va_arg(args, unsigned long long); | |
| else | |
| v = va_arg(args, unsigned long); | |
| } else | |
| v = va_arg(args, unsigned int); | |
| if (c == 'd') { | |
| /* sign-extend the value */ | |
| if (lpref == 0) | |
| v = (long long)(int)v; | |
| else if (lpref == 1) | |
| v = (long long)(long)v; | |
| } | |
| switch (c) { | |
| case 'c': | |
| out[0] = v; | |
| out[1] = 0; | |
| break; | |
| case 'd': | |
| i64toa_r(v, out); | |
| break; | |
| case 'u': | |
| u64toa_r(v, out); | |
| break; | |
| case 'p': | |
| *(out++) = '0'; | |
| *(out++) = 'x'; | |
| /* fall through */ | |
| default: /* 'x' and 'p' above */ | |
| u64toh_r(v, out); | |
| break; | |
| } | |
| outstr = tmpbuf; | |
| } | |
| else if (c == 's') { | |
| outstr = va_arg(args, char *); | |
| if (!outstr) | |
| outstr="(null)"; | |
| } | |
| else if (c == '%') { | |
| /* queue it verbatim */ | |
| continue; | |
| } | |
| else { | |
| /* modifiers or final 0 */ | |
| if (c == 'l') { | |
| /* long format prefix, maintain the escape */ | |
| lpref++; | |
| } | |
| escape = 1; | |
| goto do_escape; | |
| } | |
| len = strlen(outstr); | |
| goto flush_str; | |
| } | |
| /* not an escape sequence */ | |
| if (c == 0 || c == '%') { | |
| /* flush pending data on escape or end */ | |
| escape = 1; | |
| lpref = 0; | |
| outstr = fmt; | |
| len = ofs - 1; | |
| flush_str: | |
| if (_fwrite(outstr, len, stream) != 0) | |
| break; | |
| written += len; | |
| do_escape: | |
| if (c == 0) | |
| break; | |
| fmt += ofs; | |
| ofs = 0; | |
| continue; | |
| } | |
| /* literal char, just queue it */ | |
| } | |
| return written; | |
| } | |
| static __attribute__((unused, format(printf, 1, 0))) | |
| int vprintf(const char *fmt, va_list args) | |
| { | |
| return vfprintf(stdout, fmt, args); | |
| } | |
| static __attribute__((unused, format(printf, 2, 3))) | |
| int fprintf(FILE *stream, const char *fmt, ...) | |
| { | |
| va_list args; | |
| int ret; | |
| va_start(args, fmt); | |
| ret = vfprintf(stream, fmt, args); | |
| va_end(args); | |
| return ret; | |
| } | |
| static __attribute__((unused, format(printf, 1, 2))) | |
| int printf(const char *fmt, ...) | |
| { | |
| va_list args; | |
| int ret; | |
| va_start(args, fmt); | |
| ret = vfprintf(stdout, fmt, args); | |
| va_end(args); | |
| return ret; | |
| } | |
| static __attribute__((unused)) | |
| void perror(const char *msg) | |
| { | |
| fprintf(stderr, "%s%serrno=%d\n", (msg && *msg) ? msg : "", (msg && *msg) ? ": " : "", errno); | |
| } | |
| static __attribute__((unused)) | |
| int setvbuf(FILE *stream __attribute__((unused)), | |
| char *buf __attribute__((unused)), | |
| int mode, | |
| size_t size __attribute__((unused))) | |
| { | |
| /* | |
| * nolibc does not support buffering so this is a nop. Just check mode | |
| * is valid as required by the spec. | |
| */ | |
| switch (mode) { | |
| case _IOFBF: | |
| case _IOLBF: | |
| case _IONBF: | |
| break; | |
| default: | |
| return EOF; | |
| } | |
| return 0; | |
| } | |
| static __attribute__((unused)) | |
| const char *strerror(int errno) | |
| { | |
| static char buf[18] = "errno="; | |
| i64toa_r(errno, &buf[6]); | |
| return buf; | |
| } | |
| /* make sure to include all global symbols */ | |
| #include "nolibc.h" | |
| #endif /* _NOLIBC_STDIO_H */ |