| // SPDX-License-Identifier: GPL-2.0 | 
 | /* | 
 |  * CS2000  --  CIRRUS LOGIC Fractional-N Clock Synthesizer & Clock Multiplier | 
 |  * | 
 |  * Copyright (C) 2015 Renesas Electronics Corporation | 
 |  * Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> | 
 |  */ | 
 | #include <linux/clk-provider.h> | 
 | #include <linux/delay.h> | 
 | #include <linux/clk.h> | 
 | #include <linux/i2c.h> | 
 | #include <linux/of.h> | 
 | #include <linux/module.h> | 
 | #include <linux/regmap.h> | 
 |  | 
 | #define CH_MAX 4 | 
 | #define RATIO_REG_SIZE 4 | 
 |  | 
 | #define DEVICE_ID	0x1 | 
 | #define DEVICE_CTRL	0x2 | 
 | #define DEVICE_CFG1	0x3 | 
 | #define DEVICE_CFG2	0x4 | 
 | #define GLOBAL_CFG	0x5 | 
 | #define Ratio_Add(x, nth)	(6 + (x * 4) + (nth)) | 
 | #define Ratio_Val(x, nth)	((x >> (24 - (8 * nth))) & 0xFF) | 
 | #define Val_Ratio(x, nth)	((x & 0xFF) << (24 - (8 * nth))) | 
 | #define FUNC_CFG1	0x16 | 
 | #define FUNC_CFG2	0x17 | 
 |  | 
 | /* DEVICE_ID */ | 
 | #define REVISION_MASK	(0x7) | 
 | #define REVISION_B2_B3	(0x4) | 
 | #define REVISION_C1	(0x6) | 
 |  | 
 | /* DEVICE_CTRL */ | 
 | #define PLL_UNLOCK	(1 << 7) | 
 | #define AUXOUTDIS	(1 << 1) | 
 | #define CLKOUTDIS	(1 << 0) | 
 |  | 
 | /* DEVICE_CFG1 */ | 
 | #define RSEL(x)		(((x) & 0x3) << 3) | 
 | #define RSEL_MASK	RSEL(0x3) | 
 | #define AUXOUTSRC(x)	(((x) & 0x3) << 1) | 
 | #define AUXOUTSRC_MASK	AUXOUTSRC(0x3) | 
 | #define ENDEV1		(0x1) | 
 |  | 
 | /* DEVICE_CFG2 */ | 
 | #define AUTORMOD	(1 << 3) | 
 | #define LOCKCLK(x)	(((x) & 0x3) << 1) | 
 | #define LOCKCLK_MASK	LOCKCLK(0x3) | 
 | #define FRACNSRC_MASK	(1 << 0) | 
 | #define FRACNSRC_STATIC		(0 << 0) | 
 | #define FRACNSRC_DYNAMIC	(1 << 0) | 
 |  | 
 | /* GLOBAL_CFG */ | 
 | #define FREEZE		(1 << 7) | 
 | #define ENDEV2		(0x1) | 
 |  | 
 | /* FUNC_CFG1 */ | 
 | #define CLKSKIPEN	(1 << 7) | 
 | #define REFCLKDIV(x)	(((x) & 0x3) << 3) | 
 | #define REFCLKDIV_MASK	REFCLKDIV(0x3) | 
 |  | 
 | /* FUNC_CFG2 */ | 
 | #define LFRATIO_MASK	(1 << 3) | 
 | #define LFRATIO_20_12	(0 << 3) | 
 | #define LFRATIO_12_20	(1 << 3) | 
 |  | 
 | #define CH_SIZE_ERR(ch)		((ch < 0) || (ch >= CH_MAX)) | 
 | #define hw_to_priv(_hw)		container_of(_hw, struct cs2000_priv, hw) | 
 | #define priv_to_client(priv)	(priv->client) | 
 | #define priv_to_dev(priv)	(&(priv_to_client(priv)->dev)) | 
 |  | 
 | #define CLK_IN	0 | 
 | #define REF_CLK	1 | 
 | #define CLK_MAX 2 | 
 |  | 
 | static bool cs2000_readable_reg(struct device *dev, unsigned int reg) | 
 | { | 
 | 	return reg > 0; | 
 | } | 
 |  | 
 | static bool cs2000_writeable_reg(struct device *dev, unsigned int reg) | 
 | { | 
 | 	return reg != DEVICE_ID; | 
 | } | 
 |  | 
 | static bool cs2000_volatile_reg(struct device *dev, unsigned int reg) | 
 | { | 
 | 	return reg == DEVICE_CTRL; | 
 | } | 
 |  | 
 | static const struct regmap_config cs2000_regmap_config = { | 
 | 	.reg_bits	= 8, | 
 | 	.val_bits	= 8, | 
 | 	.max_register	= FUNC_CFG2, | 
 | 	.readable_reg	= cs2000_readable_reg, | 
 | 	.writeable_reg	= cs2000_writeable_reg, | 
 | 	.volatile_reg	= cs2000_volatile_reg, | 
 | }; | 
 |  | 
 | struct cs2000_priv { | 
 | 	struct clk_hw hw; | 
 | 	struct i2c_client *client; | 
 | 	struct clk *clk_in; | 
 | 	struct clk *ref_clk; | 
 | 	struct regmap *regmap; | 
 |  | 
 | 	bool dynamic_mode; | 
 | 	bool lf_ratio; | 
 | 	bool clk_skip; | 
 |  | 
 | 	/* suspend/resume */ | 
 | 	unsigned long saved_rate; | 
 | 	unsigned long saved_parent_rate; | 
 | }; | 
 |  | 
 | static const struct of_device_id cs2000_of_match[] = { | 
 | 	{ .compatible = "cirrus,cs2000-cp", }, | 
 | 	{}, | 
 | }; | 
 | MODULE_DEVICE_TABLE(of, cs2000_of_match); | 
 |  | 
 | static const struct i2c_device_id cs2000_id[] = { | 
 | 	{ "cs2000-cp", }, | 
 | 	{} | 
 | }; | 
 | MODULE_DEVICE_TABLE(i2c, cs2000_id); | 
 |  | 
 | static int cs2000_enable_dev_config(struct cs2000_priv *priv, bool enable) | 
 | { | 
 | 	int ret; | 
 |  | 
 | 	ret = regmap_update_bits(priv->regmap, DEVICE_CFG1, ENDEV1, | 
 | 				 enable ? ENDEV1 : 0); | 
 | 	if (ret < 0) | 
 | 		return ret; | 
 |  | 
 | 	ret = regmap_update_bits(priv->regmap, GLOBAL_CFG,  ENDEV2, | 
 | 				 enable ? ENDEV2 : 0); | 
 | 	if (ret < 0) | 
 | 		return ret; | 
 |  | 
 | 	ret = regmap_update_bits(priv->regmap, FUNC_CFG1, CLKSKIPEN, | 
 | 				 (enable && priv->clk_skip) ? CLKSKIPEN : 0); | 
 | 	if (ret < 0) | 
 | 		return ret; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int cs2000_ref_clk_bound_rate(struct cs2000_priv *priv, | 
 | 				     u32 rate_in) | 
 | { | 
 | 	u32 val; | 
 |  | 
 | 	if (rate_in >= 32000000 && rate_in < 56000000) | 
 | 		val = 0x0; | 
 | 	else if (rate_in >= 16000000 && rate_in < 28000000) | 
 | 		val = 0x1; | 
 | 	else if (rate_in >= 8000000 && rate_in < 14000000) | 
 | 		val = 0x2; | 
 | 	else | 
 | 		return -EINVAL; | 
 |  | 
 | 	return regmap_update_bits(priv->regmap, FUNC_CFG1, | 
 | 				  REFCLKDIV_MASK, | 
 | 				  REFCLKDIV(val)); | 
 | } | 
 |  | 
 | static int cs2000_wait_pll_lock(struct cs2000_priv *priv) | 
 | { | 
 | 	struct device *dev = priv_to_dev(priv); | 
 | 	unsigned int i, val; | 
 | 	int ret; | 
 |  | 
 | 	for (i = 0; i < 256; i++) { | 
 | 		ret = regmap_read(priv->regmap, DEVICE_CTRL, &val); | 
 | 		if (ret < 0) | 
 | 			return ret; | 
 | 		if (!(val & PLL_UNLOCK)) | 
 | 			return 0; | 
 | 		udelay(1); | 
 | 	} | 
 |  | 
 | 	dev_err(dev, "pll lock failed\n"); | 
 |  | 
 | 	return -ETIMEDOUT; | 
 | } | 
 |  | 
 | static int cs2000_clk_out_enable(struct cs2000_priv *priv, bool enable) | 
 | { | 
 | 	/* enable both AUX_OUT, CLK_OUT */ | 
 | 	return regmap_update_bits(priv->regmap, DEVICE_CTRL, | 
 | 				  (AUXOUTDIS | CLKOUTDIS), | 
 | 				  enable ? 0 : | 
 | 				  (AUXOUTDIS | CLKOUTDIS)); | 
 | } | 
 |  | 
 | static u32 cs2000_rate_to_ratio(u32 rate_in, u32 rate_out, bool lf_ratio) | 
 | { | 
 | 	u64 ratio; | 
 | 	u32 multiplier = lf_ratio ? 12 : 20; | 
 |  | 
 | 	/* | 
 | 	 * ratio = rate_out / rate_in * 2^multiplier | 
 | 	 * | 
 | 	 * To avoid over flow, rate_out is u64. | 
 | 	 * The result should be u32. | 
 | 	 */ | 
 | 	ratio = (u64)rate_out << multiplier; | 
 | 	do_div(ratio, rate_in); | 
 |  | 
 | 	return ratio; | 
 | } | 
 |  | 
 | static unsigned long cs2000_ratio_to_rate(u32 ratio, u32 rate_in, bool lf_ratio) | 
 | { | 
 | 	u64 rate_out; | 
 | 	u32 multiplier = lf_ratio ? 12 : 20; | 
 |  | 
 | 	/* | 
 | 	 * ratio = rate_out / rate_in * 2^multiplier | 
 | 	 * | 
 | 	 * To avoid over flow, rate_out is u64. | 
 | 	 * The result should be u32 or unsigned long. | 
 | 	 */ | 
 |  | 
 | 	rate_out = (u64)ratio * rate_in; | 
 | 	return rate_out >> multiplier; | 
 | } | 
 |  | 
 | static int cs2000_ratio_set(struct cs2000_priv *priv, | 
 | 			    int ch, u32 rate_in, u32 rate_out) | 
 | { | 
 | 	u32 val; | 
 | 	unsigned int i; | 
 | 	int ret; | 
 |  | 
 | 	if (CH_SIZE_ERR(ch)) | 
 | 		return -EINVAL; | 
 |  | 
 | 	val = cs2000_rate_to_ratio(rate_in, rate_out, priv->lf_ratio); | 
 | 	for (i = 0; i < RATIO_REG_SIZE; i++) { | 
 | 		ret = regmap_write(priv->regmap, | 
 | 				   Ratio_Add(ch, i), | 
 | 				   Ratio_Val(val, i)); | 
 | 		if (ret < 0) | 
 | 			return ret; | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static u32 cs2000_ratio_get(struct cs2000_priv *priv, int ch) | 
 | { | 
 | 	unsigned int tmp, i; | 
 | 	u32 val; | 
 | 	int ret; | 
 |  | 
 | 	val = 0; | 
 | 	for (i = 0; i < RATIO_REG_SIZE; i++) { | 
 | 		ret = regmap_read(priv->regmap, Ratio_Add(ch, i), &tmp); | 
 | 		if (ret < 0) | 
 | 			return 0; | 
 |  | 
 | 		val |= Val_Ratio(tmp, i); | 
 | 	} | 
 |  | 
 | 	return val; | 
 | } | 
 |  | 
 | static int cs2000_ratio_select(struct cs2000_priv *priv, int ch) | 
 | { | 
 | 	int ret; | 
 | 	u8 fracnsrc; | 
 |  | 
 | 	if (CH_SIZE_ERR(ch)) | 
 | 		return -EINVAL; | 
 |  | 
 | 	ret = regmap_update_bits(priv->regmap, DEVICE_CFG1, RSEL_MASK, RSEL(ch)); | 
 | 	if (ret < 0) | 
 | 		return ret; | 
 |  | 
 | 	fracnsrc = priv->dynamic_mode ? FRACNSRC_DYNAMIC : FRACNSRC_STATIC; | 
 |  | 
 | 	ret = regmap_update_bits(priv->regmap, DEVICE_CFG2, | 
 | 				 AUTORMOD | LOCKCLK_MASK | FRACNSRC_MASK, | 
 | 				 LOCKCLK(ch) | fracnsrc); | 
 | 	if (ret < 0) | 
 | 		return ret; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static unsigned long cs2000_recalc_rate(struct clk_hw *hw, | 
 | 					unsigned long parent_rate) | 
 | { | 
 | 	struct cs2000_priv *priv = hw_to_priv(hw); | 
 | 	int ch = 0; /* it uses ch0 only at this point */ | 
 | 	u32 ratio; | 
 |  | 
 | 	ratio = cs2000_ratio_get(priv, ch); | 
 |  | 
 | 	return cs2000_ratio_to_rate(ratio, parent_rate, priv->lf_ratio); | 
 | } | 
 |  | 
 | static long cs2000_round_rate(struct clk_hw *hw, unsigned long rate, | 
 | 			      unsigned long *parent_rate) | 
 | { | 
 | 	struct cs2000_priv *priv = hw_to_priv(hw); | 
 | 	u32 ratio; | 
 |  | 
 | 	ratio = cs2000_rate_to_ratio(*parent_rate, rate, priv->lf_ratio); | 
 |  | 
 | 	return cs2000_ratio_to_rate(ratio, *parent_rate, priv->lf_ratio); | 
 | } | 
 |  | 
 | static int cs2000_select_ratio_mode(struct cs2000_priv *priv, | 
 | 				    unsigned long rate, | 
 | 				    unsigned long parent_rate) | 
 | { | 
 | 	/* | 
 | 	 * From the datasheet: | 
 | 	 * | 
 | 	 * | It is recommended that the 12.20 High-Resolution format be | 
 | 	 * | utilized whenever the desired ratio is less than 4096 since | 
 | 	 * | the output frequency accuracy of the PLL is directly proportional | 
 | 	 * | to the accuracy of the timing reference clock and the resolution | 
 | 	 * | of the R_UD. | 
 | 	 * | 
 | 	 * This mode is only available in dynamic mode. | 
 | 	 */ | 
 | 	priv->lf_ratio = priv->dynamic_mode && ((rate / parent_rate) > 4096); | 
 |  | 
 | 	return regmap_update_bits(priv->regmap, FUNC_CFG2, LFRATIO_MASK, | 
 | 				  priv->lf_ratio ? LFRATIO_20_12 : LFRATIO_12_20); | 
 | } | 
 |  | 
 | static int __cs2000_set_rate(struct cs2000_priv *priv, int ch, | 
 | 			     unsigned long rate, unsigned long parent_rate) | 
 |  | 
 | { | 
 | 	int ret; | 
 |  | 
 | 	ret = regmap_update_bits(priv->regmap, GLOBAL_CFG, FREEZE, FREEZE); | 
 | 	if (ret < 0) | 
 | 		return ret; | 
 |  | 
 | 	ret = cs2000_select_ratio_mode(priv, rate, parent_rate); | 
 | 	if (ret < 0) | 
 | 		return ret; | 
 |  | 
 | 	ret = cs2000_ratio_set(priv, ch, parent_rate, rate); | 
 | 	if (ret < 0) | 
 | 		return ret; | 
 |  | 
 | 	ret = cs2000_ratio_select(priv, ch); | 
 | 	if (ret < 0) | 
 | 		return ret; | 
 |  | 
 | 	ret = regmap_update_bits(priv->regmap, GLOBAL_CFG, FREEZE, 0); | 
 | 	if (ret < 0) | 
 | 		return ret; | 
 |  | 
 | 	priv->saved_rate	= rate; | 
 | 	priv->saved_parent_rate	= parent_rate; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int cs2000_set_rate(struct clk_hw *hw, | 
 | 			   unsigned long rate, unsigned long parent_rate) | 
 | { | 
 | 	struct cs2000_priv *priv = hw_to_priv(hw); | 
 | 	int ch = 0; /* it uses ch0 only at this point */ | 
 |  | 
 | 	return __cs2000_set_rate(priv, ch, rate, parent_rate); | 
 | } | 
 |  | 
 | static int cs2000_set_saved_rate(struct cs2000_priv *priv) | 
 | { | 
 | 	int ch = 0; /* it uses ch0 only at this point */ | 
 |  | 
 | 	return __cs2000_set_rate(priv, ch, | 
 | 				 priv->saved_rate, | 
 | 				 priv->saved_parent_rate); | 
 | } | 
 |  | 
 | static int cs2000_enable(struct clk_hw *hw) | 
 | { | 
 | 	struct cs2000_priv *priv = hw_to_priv(hw); | 
 | 	int ret; | 
 |  | 
 | 	ret = cs2000_enable_dev_config(priv, true); | 
 | 	if (ret < 0) | 
 | 		return ret; | 
 |  | 
 | 	ret = cs2000_clk_out_enable(priv, true); | 
 | 	if (ret < 0) | 
 | 		return ret; | 
 |  | 
 | 	ret = cs2000_wait_pll_lock(priv); | 
 | 	if (ret < 0) | 
 | 		return ret; | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | static void cs2000_disable(struct clk_hw *hw) | 
 | { | 
 | 	struct cs2000_priv *priv = hw_to_priv(hw); | 
 |  | 
 | 	cs2000_enable_dev_config(priv, false); | 
 |  | 
 | 	cs2000_clk_out_enable(priv, false); | 
 | } | 
 |  | 
 | static u8 cs2000_get_parent(struct clk_hw *hw) | 
 | { | 
 | 	struct cs2000_priv *priv = hw_to_priv(hw); | 
 |  | 
 | 	/* | 
 | 	 * In dynamic mode, output rates are derived from CLK_IN. | 
 | 	 * In static mode, CLK_IN is ignored, so we return REF_CLK instead. | 
 | 	 */ | 
 | 	return priv->dynamic_mode ? CLK_IN : REF_CLK; | 
 | } | 
 |  | 
 | static const struct clk_ops cs2000_ops = { | 
 | 	.get_parent	= cs2000_get_parent, | 
 | 	.recalc_rate	= cs2000_recalc_rate, | 
 | 	.round_rate	= cs2000_round_rate, | 
 | 	.set_rate	= cs2000_set_rate, | 
 | 	.prepare	= cs2000_enable, | 
 | 	.unprepare	= cs2000_disable, | 
 | }; | 
 |  | 
 | static int cs2000_clk_get(struct cs2000_priv *priv) | 
 | { | 
 | 	struct device *dev = priv_to_dev(priv); | 
 | 	struct clk *clk_in, *ref_clk; | 
 |  | 
 | 	clk_in = devm_clk_get(dev, "clk_in"); | 
 | 	/* not yet provided */ | 
 | 	if (IS_ERR(clk_in)) | 
 | 		return -EPROBE_DEFER; | 
 |  | 
 | 	ref_clk = devm_clk_get(dev, "ref_clk"); | 
 | 	/* not yet provided */ | 
 | 	if (IS_ERR(ref_clk)) | 
 | 		return -EPROBE_DEFER; | 
 |  | 
 | 	priv->clk_in	= clk_in; | 
 | 	priv->ref_clk	= ref_clk; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int cs2000_clk_register(struct cs2000_priv *priv) | 
 | { | 
 | 	struct device *dev = priv_to_dev(priv); | 
 | 	struct device_node *np = dev->of_node; | 
 | 	struct clk_init_data init; | 
 | 	const char *name = np->name; | 
 | 	static const char *parent_names[CLK_MAX]; | 
 | 	u32 aux_out = 0; | 
 | 	int ref_clk_rate; | 
 | 	int ch = 0; /* it uses ch0 only at this point */ | 
 | 	int ret; | 
 |  | 
 | 	of_property_read_string(np, "clock-output-names", &name); | 
 |  | 
 | 	priv->dynamic_mode = of_property_read_bool(np, "cirrus,dynamic-mode"); | 
 | 	dev_info(dev, "operating in %s mode\n", | 
 | 		 priv->dynamic_mode ? "dynamic" : "static"); | 
 |  | 
 | 	of_property_read_u32(np, "cirrus,aux-output-source", &aux_out); | 
 | 	ret = regmap_update_bits(priv->regmap, DEVICE_CFG1, | 
 | 				 AUXOUTSRC_MASK, AUXOUTSRC(aux_out)); | 
 | 	if (ret < 0) | 
 | 		return ret; | 
 |  | 
 | 	priv->clk_skip = of_property_read_bool(np, "cirrus,clock-skip"); | 
 |  | 
 | 	ref_clk_rate = clk_get_rate(priv->ref_clk); | 
 | 	ret = cs2000_ref_clk_bound_rate(priv, ref_clk_rate); | 
 | 	if (ret < 0) | 
 | 		return ret; | 
 |  | 
 | 	if (priv->dynamic_mode) { | 
 | 		/* Default to low-frequency mode to allow for large ratios */ | 
 | 		priv->lf_ratio = true; | 
 | 	} else { | 
 | 		/* | 
 | 		 * set default rate as 1/1. | 
 | 		 * otherwise .set_rate which setup ratio | 
 | 		 * is never called if user requests 1/1 rate | 
 | 		 */ | 
 | 		ret = __cs2000_set_rate(priv, ch, ref_clk_rate, ref_clk_rate); | 
 | 		if (ret < 0) | 
 | 			return ret; | 
 | 	} | 
 |  | 
 | 	parent_names[CLK_IN]	= __clk_get_name(priv->clk_in); | 
 | 	parent_names[REF_CLK]	= __clk_get_name(priv->ref_clk); | 
 |  | 
 | 	init.name		= name; | 
 | 	init.ops		= &cs2000_ops; | 
 | 	init.flags		= CLK_SET_RATE_GATE; | 
 | 	init.parent_names	= parent_names; | 
 | 	init.num_parents	= ARRAY_SIZE(parent_names); | 
 |  | 
 | 	priv->hw.init = &init; | 
 |  | 
 | 	ret = clk_hw_register(dev, &priv->hw); | 
 | 	if (ret) | 
 | 		return ret; | 
 |  | 
 | 	ret = of_clk_add_hw_provider(np, of_clk_hw_simple_get, &priv->hw); | 
 | 	if (ret < 0) { | 
 | 		clk_hw_unregister(&priv->hw); | 
 | 		return ret; | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int cs2000_version_print(struct cs2000_priv *priv) | 
 | { | 
 | 	struct device *dev = priv_to_dev(priv); | 
 | 	const char *revision; | 
 | 	unsigned int val; | 
 | 	int ret; | 
 |  | 
 | 	ret = regmap_read(priv->regmap, DEVICE_ID, &val); | 
 | 	if (ret < 0) | 
 | 		return ret; | 
 |  | 
 | 	/* CS2000 should be 0x0 */ | 
 | 	if (val >> 3) | 
 | 		return -EIO; | 
 |  | 
 | 	switch (val & REVISION_MASK) { | 
 | 	case REVISION_B2_B3: | 
 | 		revision = "B2 / B3"; | 
 | 		break; | 
 | 	case REVISION_C1: | 
 | 		revision = "C1"; | 
 | 		break; | 
 | 	default: | 
 | 		return -EIO; | 
 | 	} | 
 |  | 
 | 	dev_info(dev, "revision - %s\n", revision); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void cs2000_remove(struct i2c_client *client) | 
 | { | 
 | 	struct cs2000_priv *priv = i2c_get_clientdata(client); | 
 | 	struct device *dev = priv_to_dev(priv); | 
 | 	struct device_node *np = dev->of_node; | 
 |  | 
 | 	of_clk_del_provider(np); | 
 |  | 
 | 	clk_hw_unregister(&priv->hw); | 
 | } | 
 |  | 
 | static int cs2000_probe(struct i2c_client *client) | 
 | { | 
 | 	struct cs2000_priv *priv; | 
 | 	struct device *dev = &client->dev; | 
 | 	int ret; | 
 |  | 
 | 	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); | 
 | 	if (!priv) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	priv->client = client; | 
 | 	i2c_set_clientdata(client, priv); | 
 |  | 
 | 	priv->regmap = devm_regmap_init_i2c(client, &cs2000_regmap_config); | 
 | 	if (IS_ERR(priv->regmap)) | 
 | 		return PTR_ERR(priv->regmap); | 
 |  | 
 | 	ret = cs2000_clk_get(priv); | 
 | 	if (ret < 0) | 
 | 		return ret; | 
 |  | 
 | 	ret = cs2000_clk_register(priv); | 
 | 	if (ret < 0) | 
 | 		return ret; | 
 |  | 
 | 	ret = cs2000_version_print(priv); | 
 | 	if (ret < 0) | 
 | 		goto probe_err; | 
 |  | 
 | 	return 0; | 
 |  | 
 | probe_err: | 
 | 	cs2000_remove(client); | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | static int __maybe_unused cs2000_resume(struct device *dev) | 
 | { | 
 | 	struct cs2000_priv *priv = dev_get_drvdata(dev); | 
 |  | 
 | 	return cs2000_set_saved_rate(priv); | 
 | } | 
 |  | 
 | static const struct dev_pm_ops cs2000_pm_ops = { | 
 | 	SET_LATE_SYSTEM_SLEEP_PM_OPS(NULL, cs2000_resume) | 
 | }; | 
 |  | 
 | static struct i2c_driver cs2000_driver = { | 
 | 	.driver = { | 
 | 		.name = "cs2000-cp", | 
 | 		.pm	= &cs2000_pm_ops, | 
 | 		.of_match_table = cs2000_of_match, | 
 | 	}, | 
 | 	.probe		= cs2000_probe, | 
 | 	.remove		= cs2000_remove, | 
 | 	.id_table	= cs2000_id, | 
 | }; | 
 |  | 
 | module_i2c_driver(cs2000_driver); | 
 |  | 
 | MODULE_DESCRIPTION("CS2000-CP driver"); | 
 | MODULE_AUTHOR("Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>"); | 
 | MODULE_LICENSE("GPL v2"); |