Merge tag 'coccinelle-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/jlawall/linux Pull Coccinelle fixes from Julia Lawall: "These fix a typo and make the coccicheck script more robust by ensuring that only compatible semantic patches are executed for the chosen mode" * tag 'coccinelle-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/jlawall/linux: Coccinelle: pm_runtime: Fix typo in report message scripts: coccicheck: filter *.cocci files by MODE
diff --git a/Documentation/arch/x86/boot.rst b/Documentation/arch/x86/boot.rst index 6d36ce8..dca3875 100644 --- a/Documentation/arch/x86/boot.rst +++ b/Documentation/arch/x86/boot.rst
@@ -95,26 +95,26 @@ The traditional memory map for the kernel loader, used for Image or zImage kernels, typically looks like:: - | | + | | 0A0000 +------------------------+ - | Reserved for BIOS | Do not use. Reserved for BIOS EBDA. + | Reserved for BIOS | Do not use. Reserved for BIOS EBDA. 09A000 +------------------------+ - | Command line | - | Stack/heap | For use by the kernel real-mode code. + | Command line | + | Stack/heap | For use by the kernel real-mode code. 098000 +------------------------+ - | Kernel setup | The kernel real-mode code. + | Kernel setup | The kernel real-mode code. 090200 +------------------------+ - | Kernel boot sector | The kernel legacy boot sector. + | Kernel boot sector | The kernel legacy boot sector. 090000 +------------------------+ - | Protected-mode kernel | The bulk of the kernel image. + | Protected-mode kernel | The bulk of the kernel image. 010000 +------------------------+ - | Boot loader | <- Boot sector entry point 0000:7C00 + | Boot loader | <- Boot sector entry point 0000:7C00 001000 +------------------------+ - | Reserved for MBR/BIOS | + | Reserved for MBR/BIOS | 000800 +------------------------+ - | Typically used by MBR | + | Typically used by MBR | 000600 +------------------------+ - | BIOS use only | + | BIOS use only | 000000 +------------------------+ When using bzImage, the protected-mode kernel was relocated to @@ -142,27 +142,27 @@ For a modern bzImage kernel with boot protocol version >= 2.02, a memory layout like the following is suggested:: - ~ ~ - | Protected-mode kernel | + ~ ~ + | Protected-mode kernel | 100000 +------------------------+ - | I/O memory hole | + | I/O memory hole | 0A0000 +------------------------+ - | Reserved for BIOS | Leave as much as possible unused - ~ ~ - | Command line | (Can also be below the X+10000 mark) + | Reserved for BIOS | Leave as much as possible unused + ~ ~ + | Command line | (Can also be below the X+10000 mark) X+10000 +------------------------+ - | Stack/heap | For use by the kernel real-mode code. + | Stack/heap | For use by the kernel real-mode code. X+08000 +------------------------+ - | Kernel setup | The kernel real-mode code. - | Kernel boot sector | The kernel legacy boot sector. + | Kernel setup | The kernel real-mode code. + | Kernel boot sector | The kernel legacy boot sector. X +------------------------+ - | Boot loader | <- Boot sector entry point 0000:7C00 + | Boot loader | <- Boot sector entry point 0000:7C00 001000 +------------------------+ - | Reserved for MBR/BIOS | + | Reserved for MBR/BIOS | 000800 +------------------------+ - | Typically used by MBR | + | Typically used by MBR | 000600 +------------------------+ - | BIOS use only | + | BIOS use only | 000000 +------------------------+ ... where the address X is as low as the design of the boot loader permits. @@ -433,7 +433,7 @@ Assigned boot loader IDs: - == ======================================= + ==== ======================================= 0x0 LILO (0x00 reserved for pre-2.00 bootloader) 0x1 Loadlin @@ -456,7 +456,7 @@ <http://sebastian-plotz.blogspot.de> 0x12 OVMF UEFI virtualization stack 0x13 barebox - == ======================================= + ==== ======================================= Please contact <hpa@zytor.com> if you need a bootloader ID value assigned. @@ -809,12 +809,12 @@ as follow:: struct setup_data { - __u64 next; - __u32 type; - __u32 len; - __u8 data[]; + __u64 next; + __u32 type; + __u32 len; + __u8 data[]; } - + Where, the next is a 64-bit physical pointer to the next node of linked list, the next field of the last node is 0; the type is used to identify the contents of data; the len is the length of data @@ -835,10 +835,10 @@ protocol 2.15:: struct setup_indirect { - __u32 type; - __u32 reserved; /* Reserved, must be set to zero. */ - __u64 len; - __u64 addr; + __u32 type; + __u32 reserved; /* Reserved, must be set to zero. */ + __u64 len; + __u64 addr; }; The type member is a SETUP_INDIRECT | SETUP_* type. However, it cannot be @@ -850,15 +850,15 @@ In this case setup_data and setup_indirect will look like this:: struct setup_data { - .next = 0, /* or <addr_of_next_setup_data_struct> */ - .type = SETUP_INDIRECT, - .len = sizeof(setup_indirect), - .data[sizeof(setup_indirect)] = (struct setup_indirect) { - .type = SETUP_INDIRECT | SETUP_E820_EXT, - .reserved = 0, - .len = <len_of_SETUP_E820_EXT_data>, - .addr = <addr_of_SETUP_E820_EXT_data>, - }, + .next = 0, /* or <addr_of_next_setup_data_struct> */ + .type = SETUP_INDIRECT, + .len = sizeof(setup_indirect), + .data[sizeof(setup_indirect)] = (struct setup_indirect) { + .type = SETUP_INDIRECT | SETUP_E820_EXT, + .reserved = 0, + .len = <len_of_SETUP_E820_EXT_data>, + .addr = <addr_of_SETUP_E820_EXT_data>, + }, } .. note:: @@ -897,11 +897,11 @@ The kernel runtime start address is determined by the following algorithm:: if (relocatable_kernel) { - if (load_address < pref_address) - load_address = pref_address; - runtime_start = align_up(load_address, kernel_alignment); + if (load_address < pref_address) + load_address = pref_address; + runtime_start = align_up(load_address, kernel_alignment); } else { - runtime_start = pref_address; + runtime_start = pref_address; } Hence the necessary memory window location and size can be estimated by @@ -975,22 +975,22 @@ be prefixed with header/magic and its size, e.g.:: kernel_info: - .ascii "LToP" /* Header, Linux top (structure). */ - .long kernel_info_var_len_data - kernel_info - .long kernel_info_end - kernel_info - .long 0x01234567 /* Some fixed size data for the bootloaders. */ + .ascii "LToP" /* Header, Linux top (structure). */ + .long kernel_info_var_len_data - kernel_info + .long kernel_info_end - kernel_info + .long 0x01234567 /* Some fixed size data for the bootloaders. */ kernel_info_var_len_data: example_struct: /* Some variable size data for the bootloaders. */ - .ascii "0123" /* Header/Magic. */ - .long example_struct_end - example_struct - .ascii "Struct" - .long 0x89012345 + .ascii "0123" /* Header/Magic. */ + .long example_struct_end - example_struct + .ascii "Struct" + .long 0x89012345 example_struct_end: example_strings: /* Some variable size data for the bootloaders. */ - .ascii "ABCD" /* Header/Magic. */ - .long example_strings_end - example_strings - .asciz "String_0" - .asciz "String_1" + .ascii "ABCD" /* Header/Magic. */ + .long example_strings_end - example_strings + .asciz "String_0" + .asciz "String_1" example_strings_end: kernel_info_end: @@ -1132,53 +1132,53 @@ unsigned long base_ptr; /* base address for real-mode segment */ if (setup_sects == 0) - setup_sects = 4; + setup_sects = 4; if (protocol >= 0x0200) { - type_of_loader = <type code>; - if (loading_initrd) { - ramdisk_image = <initrd_address>; - ramdisk_size = <initrd_size>; - } + type_of_loader = <type code>; + if (loading_initrd) { + ramdisk_image = <initrd_address>; + ramdisk_size = <initrd_size>; + } - if (protocol >= 0x0202 && loadflags & 0x01) - heap_end = 0xe000; - else - heap_end = 0x9800; + if (protocol >= 0x0202 && loadflags & 0x01) + heap_end = 0xe000; + else + heap_end = 0x9800; - if (protocol >= 0x0201) { - heap_end_ptr = heap_end - 0x200; - loadflags |= 0x80; /* CAN_USE_HEAP */ - } + if (protocol >= 0x0201) { + heap_end_ptr = heap_end - 0x200; + loadflags |= 0x80; /* CAN_USE_HEAP */ + } - if (protocol >= 0x0202) { - cmd_line_ptr = base_ptr + heap_end; - strcpy(cmd_line_ptr, cmdline); - } else { - cmd_line_magic = 0xA33F; - cmd_line_offset = heap_end; - setup_move_size = heap_end + strlen(cmdline) + 1; - strcpy(base_ptr + cmd_line_offset, cmdline); - } + if (protocol >= 0x0202) { + cmd_line_ptr = base_ptr + heap_end; + strcpy(cmd_line_ptr, cmdline); + } else { + cmd_line_magic = 0xA33F; + cmd_line_offset = heap_end; + setup_move_size = heap_end + strlen(cmdline) + 1; + strcpy(base_ptr + cmd_line_offset, cmdline); + } } else { - /* Very old kernel */ + /* Very old kernel */ - heap_end = 0x9800; + heap_end = 0x9800; - cmd_line_magic = 0xA33F; - cmd_line_offset = heap_end; + cmd_line_magic = 0xA33F; + cmd_line_offset = heap_end; - /* A very old kernel MUST have its real-mode code loaded at 0x90000 */ - if (base_ptr != 0x90000) { - /* Copy the real-mode kernel */ - memcpy(0x90000, base_ptr, (setup_sects + 1) * 512); - base_ptr = 0x90000; /* Relocated */ - } + /* A very old kernel MUST have its real-mode code loaded at 0x90000 */ + if (base_ptr != 0x90000) { + /* Copy the real-mode kernel */ + memcpy(0x90000, base_ptr, (setup_sects + 1) * 512); + base_ptr = 0x90000; /* Relocated */ + } - strcpy(0x90000 + cmd_line_offset, cmdline); + strcpy(0x90000 + cmd_line_offset, cmdline); - /* It is recommended to clear memory up to the 32K mark */ - memset(0x90000 + (setup_sects + 1) * 512, 0, (64 - (setup_sects + 1)) * 512); + /* It is recommended to clear memory up to the 32K mark */ + memset(0x90000 + (setup_sects + 1) * 512, 0, (64 - (setup_sects + 1)) * 512); }
diff --git a/Documentation/devicetree/bindings/i2c/qcom,i2c-cci.yaml b/Documentation/devicetree/bindings/i2c/qcom,i2c-cci.yaml index 33852a5f..a3fe1ee 100644 --- a/Documentation/devicetree/bindings/i2c/qcom,i2c-cci.yaml +++ b/Documentation/devicetree/bindings/i2c/qcom,i2c-cci.yaml
@@ -38,6 +38,7 @@ - qcom,sm8450-cci - qcom,sm8550-cci - qcom,sm8650-cci + - qcom,sm8750-cci - qcom,x1e80100-cci - const: qcom,msm8996-cci # CCI v2 @@ -132,6 +133,7 @@ enum: - qcom,kaanapali-cci - qcom,qcm2290-cci + - qcom,sm8750-cci then: properties: clocks:
diff --git a/Documentation/devicetree/bindings/i2c/snps,designware-i2c.yaml b/Documentation/devicetree/bindings/i2c/snps,designware-i2c.yaml index d904191..9142001 100644 --- a/Documentation/devicetree/bindings/i2c/snps,designware-i2c.yaml +++ b/Documentation/devicetree/bindings/i2c/snps,designware-i2c.yaml
@@ -34,8 +34,15 @@ - const: snps,designware-i2c - description: Baikal-T1 SoC System I2C controller const: baikal,bt1-sys-i2c + - description: Mobileye EyeQ DesignWare I2C controller + items: + - enum: + - mobileye,eyeq7h-i2c + - const: mobileye,eyeq6lplus-i2c + - const: snps,designware-i2c - items: - enum: + - mobileye,eyeq6lplus-i2c - mscc,ocelot-i2c - sophgo,sg2044-i2c - thead,th1520-i2c
diff --git a/Documentation/i2c/busses/i2c-i801.rst b/Documentation/i2c/busses/i2c-i801.rst index c939a5b..bbbce90 100644 --- a/Documentation/i2c/busses/i2c-i801.rst +++ b/Documentation/i2c/busses/i2c-i801.rst
@@ -52,6 +52,7 @@ * Intel Panther Lake (SOC) * Intel Wildcat Lake (SOC) * Intel Diamond Rapids (SOC) + * Intel Nova Lake (PCH) Datasheets: Publicly available at the Intel website
diff --git a/Documentation/input/event-codes.rst b/Documentation/input/event-codes.rst index 4424cbf..77a6c9b 100644 --- a/Documentation/input/event-codes.rst +++ b/Documentation/input/event-codes.rst
@@ -241,6 +241,12 @@ emitted only when the selected profile changes, indicating the newly selected profile value. +* ABS_SND_PROFILE: + + - Used to describe the state of a multi-value sound profile switch. + An event is emitted only when the selected profile changes, + indicating the newly selected profile value. + * ABS_MT_<name>: - Used to describe multitouch input events. Please see
diff --git a/arch/x86/include/asm/bug.h b/arch/x86/include/asm/bug.h index d561a84..9b4e046 100644 --- a/arch/x86/include/asm/bug.h +++ b/arch/x86/include/asm/bug.h
@@ -15,7 +15,7 @@ extern void __WARN_trap(struct bug_entry *bug, ...); /* * Despite that some emulators terminate on UD2, we use it for WARN(). */ -#define ASM_UD2 _ASM_BYTES(0x0f, 0x0b) +#define ASM_UD2 __ASM_FORM(ud2) #define INSN_UD2 0x0b0f #define LEN_UD2 2
diff --git a/arch/x86/include/asm/irq_remapping.h b/arch/x86/include/asm/irq_remapping.h index 5a0d424..4e55d17 100644 --- a/arch/x86/include/asm/irq_remapping.h +++ b/arch/x86/include/asm/irq_remapping.h
@@ -87,4 +87,11 @@ static inline void panic_if_irq_remap(const char *msg) } #endif /* CONFIG_IRQ_REMAP */ + +#ifdef CONFIG_X86_POSTED_MSI +void intel_ack_posted_msi_irq(struct irq_data *irqd); +#else +#define intel_ack_posted_msi_irq NULL +#endif + #endif /* __X86_IRQ_REMAPPING_H */
diff --git a/arch/x86/include/asm/uv/bios.h b/arch/x86/include/asm/uv/bios.h index 6989b82..d0b62e2 100644 --- a/arch/x86/include/asm/uv/bios.h +++ b/arch/x86/include/asm/uv/bios.h
@@ -122,7 +122,7 @@ struct uv_systab { struct { u32 type:8; /* type of entry */ u32 offset:24; /* byte offset from struct start to entry */ - } entry[1]; /* additional entries follow */ + } entry[]; /* additional entries follow */ }; extern struct uv_systab *uv_systab;
diff --git a/arch/x86/kernel/cpu/sgx/ioctl.c b/arch/x86/kernel/cpu/sgx/ioctl.c index 66f1efa..9322a92 100644 --- a/arch/x86/kernel/cpu/sgx/ioctl.c +++ b/arch/x86/kernel/cpu/sgx/ioctl.c
@@ -242,7 +242,7 @@ static int __sgx_encl_add_page(struct sgx_encl *encl, /* * If the caller requires measurement of the page as a proof for the content, * use EEXTEND to add a measurement for 256 bytes of the page. Repeat this - * operation until the entire page is measured." + * operation until the entire page is measured. */ static int __sgx_encl_extend(struct sgx_encl *encl, struct sgx_epc_page *epc_page)
diff --git a/arch/x86/kernel/fpu/xstate.c b/arch/x86/kernel/fpu/xstate.c index 48113c5..76153df 100644 --- a/arch/x86/kernel/fpu/xstate.c +++ b/arch/x86/kernel/fpu/xstate.c
@@ -1946,7 +1946,7 @@ static int dump_xsave_layout_desc(struct coredump_params *cprm) }; if (!dump_emit(cprm, &xc, sizeof(xc))) - return 0; + return -1; num_records++; } @@ -1984,7 +1984,7 @@ int elf_coredump_extra_notes_write(struct coredump_params *cprm) return 1; num_records = dump_xsave_layout_desc(cprm); - if (!num_records) + if (num_records < 0) return 1; /* Total size should be equal to the number of records */
diff --git a/arch/x86/kernel/irq.c b/arch/x86/kernel/irq.c index 86f4e57..b2fe618 100644 --- a/arch/x86/kernel/irq.c +++ b/arch/x86/kernel/irq.c
@@ -397,6 +397,7 @@ DEFINE_IDTENTRY_SYSVEC_SIMPLE(sysvec_kvm_posted_intr_nested_ipi) /* Posted Interrupt Descriptors for coalesced MSIs to be posted */ DEFINE_PER_CPU_ALIGNED(struct pi_desc, posted_msi_pi_desc); +static DEFINE_PER_CPU_CACHE_HOT(bool, posted_msi_handler_active); void intel_posted_msi_init(void) { @@ -414,6 +415,25 @@ void intel_posted_msi_init(void) this_cpu_write(posted_msi_pi_desc.ndst, destination); } +void intel_ack_posted_msi_irq(struct irq_data *irqd) +{ + irq_move_irq(irqd); + + /* + * Handle the rare case that irq_retrigger() raised the actual + * assigned vector on the target CPU, which means that it was not + * invoked via the posted MSI handler below. In that case APIC EOI + * is required as otherwise the ISR entry becomes stale and lower + * priority interrupts are never going to be delivered after that. + * + * If the posted handler invoked the device interrupt handler then + * the EOI would be premature because it would acknowledge the + * posted vector. + */ + if (unlikely(!__this_cpu_read(posted_msi_handler_active))) + apic_eoi(); +} + static __always_inline bool handle_pending_pir(unsigned long *pir, struct pt_regs *regs) { unsigned long pir_copy[NR_PIR_WORDS]; @@ -446,6 +466,8 @@ DEFINE_IDTENTRY_SYSVEC(sysvec_posted_msi_notification) pid = this_cpu_ptr(&posted_msi_pi_desc); + /* Mark the handler active for intel_ack_posted_msi_irq() */ + __this_cpu_write(posted_msi_handler_active, true); inc_irq_stat(posted_msi_notification_count); irq_enter(); @@ -474,6 +496,7 @@ DEFINE_IDTENTRY_SYSVEC(sysvec_posted_msi_notification) apic_eoi(); irq_exit(); + __this_cpu_write(posted_msi_handler_active, false); set_irq_regs(old_regs); } #endif /* X86_POSTED_MSI */
diff --git a/drivers/hid/hid-debug.c b/drivers/hid/hid-debug.c index 337d2dc8..c5865b0 100644 --- a/drivers/hid/hid-debug.c +++ b/drivers/hid/hid-debug.c
@@ -3513,6 +3513,7 @@ static const char *absolutes[ABS_CNT] = { [ABS_DISTANCE] = "Distance", [ABS_TILT_X] = "XTilt", [ABS_TILT_Y] = "YTilt", [ABS_TOOL_WIDTH] = "ToolWidth", [ABS_VOLUME] = "Volume", [ABS_PROFILE] = "Profile", + [ABS_SND_PROFILE] = "SoundProfile", [ABS_MISC] = "Misc", [ABS_MT_SLOT] = "MTSlot", [ABS_MT_TOUCH_MAJOR] = "MTMajor",
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index cea87fc..09ba55b 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig
@@ -167,6 +167,7 @@ Panther Lake (SOC) Wildcat Lake (SOC) Diamond Rapids (SOC) + Nova Lake (PCH) This driver can also be built as a module. If so, the module will be called i2c-i801.
diff --git a/drivers/i2c/busses/i2c-bcm-iproc.c b/drivers/i2c/busses/i2c-bcm-iproc.c index e418a4f..b5629cf 100644 --- a/drivers/i2c/busses/i2c-bcm-iproc.c +++ b/drivers/i2c/busses/i2c-bcm-iproc.c
@@ -1098,8 +1098,7 @@ static int bcm_iproc_i2c_probe(struct platform_device *pdev) platform_set_drvdata(pdev, iproc_i2c); iproc_i2c->device = &pdev->dev; - iproc_i2c->type = - (enum bcm_iproc_i2c_type)of_device_get_match_data(&pdev->dev); + iproc_i2c->type = (kernel_ulong_t)of_device_get_match_data(&pdev->dev); init_completion(&iproc_i2c->done); iproc_i2c->base = devm_platform_ioremap_resource(pdev, 0);
diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c index 81e6e2d..9e17897 100644 --- a/drivers/i2c/busses/i2c-i801.c +++ b/drivers/i2c/busses/i2c-i801.c
@@ -85,6 +85,7 @@ * Panther Lake-P (SOC) 0xe422 32 hard yes yes yes * Wildcat Lake-U (SOC) 0x4d22 32 hard yes yes yes * Diamond Rapids (SOC) 0x5827 32 hard yes yes yes + * Nova Lake-S (PCH) 0x6e23 32 hard yes yes yes * * Features supported by this driver: * Software PEC no @@ -245,6 +246,7 @@ #define PCI_DEVICE_ID_INTEL_BIRCH_STREAM_SMBUS 0x5796 #define PCI_DEVICE_ID_INTEL_DIAMOND_RAPIDS_SMBUS 0x5827 #define PCI_DEVICE_ID_INTEL_BROXTON_SMBUS 0x5ad4 +#define PCI_DEVICE_ID_INTEL_NOVA_LAKE_S_SMBUS 0x6e23 #define PCI_DEVICE_ID_INTEL_ARROW_LAKE_H_SMBUS 0x7722 #define PCI_DEVICE_ID_INTEL_RAPTOR_LAKE_S_SMBUS 0x7a23 #define PCI_DEVICE_ID_INTEL_ALDER_LAKE_S_SMBUS 0x7aa3 @@ -1061,6 +1063,7 @@ static const struct pci_device_id i801_ids[] = { { PCI_DEVICE_DATA(INTEL, PANTHER_LAKE_H_SMBUS, FEATURES_ICH5 | FEATURE_TCO_CNL) }, { PCI_DEVICE_DATA(INTEL, PANTHER_LAKE_P_SMBUS, FEATURES_ICH5 | FEATURE_TCO_CNL) }, { PCI_DEVICE_DATA(INTEL, WILDCAT_LAKE_U_SMBUS, FEATURES_ICH5 | FEATURE_TCO_CNL) }, + { PCI_DEVICE_DATA(INTEL, NOVA_LAKE_S_SMBUS, FEATURES_ICH5 | FEATURE_TCO_CNL) }, { 0, } };
diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c index 968a8b8..09af3b3 100644 --- a/drivers/i2c/busses/i2c-pxa.c +++ b/drivers/i2c/busses/i2c-pxa.c
@@ -1266,7 +1266,7 @@ static int i2c_pxa_probe_dt(struct platform_device *pdev, struct pxa_i2c *i2c, i2c->use_pio = of_property_read_bool(np, "mrvl,i2c-polling"); i2c->fast_mode = of_property_read_bool(np, "mrvl,i2c-fast-mode"); - *i2c_types = (enum pxa_i2c_types)device_get_match_data(&pdev->dev); + *i2c_types = (kernel_ulong_t)device_get_match_data(&pdev->dev); return 0; }
diff --git a/drivers/i2c/busses/i2c-rcar.c b/drivers/i2c/busses/i2c-rcar.c index d51884a..5ce8f8e 100644 --- a/drivers/i2c/busses/i2c-rcar.c +++ b/drivers/i2c/busses/i2c-rcar.c
@@ -1141,7 +1141,7 @@ static int rcar_i2c_probe(struct platform_device *pdev) if (IS_ERR(priv->io)) return PTR_ERR(priv->io); - priv->devtype = (enum rcar_i2c_type)of_device_get_match_data(dev); + priv->devtype = (kernel_ulong_t)of_device_get_match_data(dev); init_waitqueue_head(&priv->wait); adap = &priv->adap;
diff --git a/drivers/input/joystick/xpad.c b/drivers/input/joystick/xpad.c index d72e89c..363d509 100644 --- a/drivers/input/joystick/xpad.c +++ b/drivers/input/joystick/xpad.c
@@ -133,6 +133,8 @@ static const struct xpad_device { } xpad_device[] = { /* Please keep this list sorted by vendor and product ID. */ { 0x0079, 0x18d4, "GPD Win 2 X-Box Controller", 0, XTYPE_XBOX360 }, + { 0x0351, 0x1000, "CRKD LP Blueberry Burst Pro Edition (Xbox)", 0, XTYPE_XBOX360 }, + { 0x0351, 0x2000, "CRKD LP Black Tribal Edition (Xbox) ", 0, XTYPE_XBOX360 }, { 0x03eb, 0xff01, "Wooting One (Legacy)", 0, XTYPE_XBOX360 }, { 0x03eb, 0xff02, "Wooting Two (Legacy)", 0, XTYPE_XBOX360 }, { 0x03f0, 0x038D, "HyperX Clutch", 0, XTYPE_XBOX360 }, /* wired */ @@ -420,6 +422,7 @@ static const struct xpad_device { { 0x3285, 0x0663, "Nacon Evol-X", 0, XTYPE_XBOXONE }, { 0x3537, 0x1004, "GameSir T4 Kaleid", 0, XTYPE_XBOX360 }, { 0x3537, 0x1010, "GameSir G7 SE", 0, XTYPE_XBOXONE }, + { 0x3651, 0x1000, "CRKD SG", 0, XTYPE_XBOX360 }, { 0x366c, 0x0005, "ByoWave Proteus Controller", MAP_SHARE_BUTTON, XTYPE_XBOXONE, FLAG_DELAY_INIT }, { 0x3767, 0x0101, "Fanatec Speedster 3 Forceshock Wheel", 0, XTYPE_XBOX }, { 0x37d7, 0x2501, "Flydigi Apex 5", 0, XTYPE_XBOX360 }, @@ -518,6 +521,7 @@ static const struct usb_device_id xpad_table[] = { */ { USB_INTERFACE_INFO('X', 'B', 0) }, /* Xbox USB-IF not-approved class */ XPAD_XBOX360_VENDOR(0x0079), /* GPD Win 2 controller */ + XPAD_XBOX360_VENDOR(0x0351), /* CRKD Controllers */ XPAD_XBOX360_VENDOR(0x03eb), /* Wooting Keyboards (Legacy) */ XPAD_XBOX360_VENDOR(0x03f0), /* HP HyperX Xbox 360 controllers */ XPAD_XBOXONE_VENDOR(0x03f0), /* HP HyperX Xbox One controllers */ @@ -578,6 +582,7 @@ static const struct usb_device_id xpad_table[] = { XPAD_XBOXONE_VENDOR(0x3285), /* Nacon Evol-X */ XPAD_XBOX360_VENDOR(0x3537), /* GameSir Controllers */ XPAD_XBOXONE_VENDOR(0x3537), /* GameSir Controllers */ + XPAD_XBOX360_VENDOR(0x3651), /* CRKD Controllers */ XPAD_XBOXONE_VENDOR(0x366c), /* ByoWave controllers */ XPAD_XBOX360_VENDOR(0x37d7), /* Flydigi Controllers */ XPAD_XBOX360_VENDOR(0x413d), /* Black Shark Green Ghost Controller */
diff --git a/drivers/input/keyboard/atkbd.c b/drivers/input/keyboard/atkbd.c index 6c999d8..422e28a 100644 --- a/drivers/input/keyboard/atkbd.c +++ b/drivers/input/keyboard/atkbd.c
@@ -1937,6 +1937,13 @@ static const struct dmi_system_id atkbd_dmi_quirk_table[] __initconst = { }, .callback = atkbd_deactivate_fixup, }, + { + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "HONOR"), + DMI_MATCH(DMI_PRODUCT_NAME, "FMB-P"), + }, + .callback = atkbd_deactivate_fixup, + }, { } };
diff --git a/drivers/input/keyboard/lkkbd.c b/drivers/input/keyboard/lkkbd.c index c035216..2f130f8 100644 --- a/drivers/input/keyboard/lkkbd.c +++ b/drivers/input/keyboard/lkkbd.c
@@ -670,7 +670,8 @@ static int lkkbd_connect(struct serio *serio, struct serio_driver *drv) return 0; - fail3: serio_close(serio); + fail3: disable_work_sync(&lk->tq); + serio_close(serio); fail2: serio_set_drvdata(serio, NULL); fail1: input_free_device(input_dev); kfree(lk); @@ -684,6 +685,8 @@ static void lkkbd_disconnect(struct serio *serio) { struct lkkbd *lk = serio_get_drvdata(serio); + disable_work_sync(&lk->tq); + input_get_device(lk->dev); input_unregister_device(lk->dev); serio_close(serio);
diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c index d0cb9fb..df8953a 100644 --- a/drivers/input/mouse/alps.c +++ b/drivers/input/mouse/alps.c
@@ -2975,6 +2975,7 @@ static void alps_disconnect(struct psmouse *psmouse) psmouse_reset(psmouse); timer_shutdown_sync(&priv->timer); + disable_delayed_work_sync(&priv->dev3_register_work); if (priv->dev2) input_unregister_device(priv->dev2); if (!IS_ERR_OR_NULL(priv->dev3))
diff --git a/drivers/input/serio/i8042-acpipnpio.h b/drivers/input/serio/i8042-acpipnpio.h index 1caa6c4..6547712 100644 --- a/drivers/input/serio/i8042-acpipnpio.h +++ b/drivers/input/serio/i8042-acpipnpio.h
@@ -1169,6 +1169,13 @@ static const struct dmi_system_id i8042_dmi_quirk_table[] __initconst = { .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS | SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP) }, + { + .matches = { + DMI_MATCH(DMI_BOARD_NAME, "X5KK45xS_X5SP45xS"), + }, + .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS | + SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP) + }, /* * A lot of modern Clevo barebones have touchpad and/or keyboard issues * after suspend fixable with the forcenorestore quirk.
diff --git a/drivers/input/touchscreen/apple_z2.c b/drivers/input/touchscreen/apple_z2.c index 0de161e..271abab 100644 --- a/drivers/input/touchscreen/apple_z2.c +++ b/drivers/input/touchscreen/apple_z2.c
@@ -21,6 +21,7 @@ #define APPLE_Z2_TOUCH_STARTED 3 #define APPLE_Z2_TOUCH_MOVED 4 #define APPLE_Z2_CMD_READ_INTERRUPT_DATA 0xEB +#define APPLE_Z2_REPLY_INTERRUPT_DATA 0xE1 #define APPLE_Z2_HBPP_CMD_BLOB 0x3001 #define APPLE_Z2_FW_MAGIC 0x5746325A #define LOAD_COMMAND_INIT_PAYLOAD 0 @@ -142,6 +143,9 @@ static int apple_z2_read_packet(struct apple_z2 *z2) if (error) return error; + if (z2->rx_buf[0] != APPLE_Z2_REPLY_INTERRUPT_DATA) + return 0; + pkt_len = (get_unaligned_le16(z2->rx_buf + 1) + 8) & 0xfffffffc; error = spi_read(z2->spidev, z2->rx_buf, pkt_len);
diff --git a/drivers/input/touchscreen/ti_am335x_tsc.c b/drivers/input/touchscreen/ti_am335x_tsc.c index d6edfab..0534b2b 100644 --- a/drivers/input/touchscreen/ti_am335x_tsc.c +++ b/drivers/input/touchscreen/ti_am335x_tsc.c
@@ -85,7 +85,7 @@ static int titsc_config_wires(struct titsc *ts_dev) wire_order[i] = ts_dev->config_inp[i] & 0x0F; if (WARN_ON(analog_line[i] > 7)) return -EINVAL; - if (WARN_ON(wire_order[i] > ARRAY_SIZE(config_pins))) + if (WARN_ON(wire_order[i] >= ARRAY_SIZE(config_pins))) return -EINVAL; }
diff --git a/drivers/iommu/intel/irq_remapping.c b/drivers/iommu/intel/irq_remapping.c index 4f9b01d..8bcbfe3 100644 --- a/drivers/iommu/intel/irq_remapping.c +++ b/drivers/iommu/intel/irq_remapping.c
@@ -1303,17 +1303,17 @@ static struct irq_chip intel_ir_chip = { * irq_enter(); * handle_edge_irq() * irq_chip_ack_parent() - * irq_move_irq(); // No EOI + * intel_ack_posted_msi_irq(); // No EOI * handle_irq_event() * driver_handler() * handle_edge_irq() * irq_chip_ack_parent() - * irq_move_irq(); // No EOI + * intel_ack_posted_msi_irq(); // No EOI * handle_irq_event() * driver_handler() * handle_edge_irq() * irq_chip_ack_parent() - * irq_move_irq(); // No EOI + * intel_ack_posted_msi_irq(); // No EOI * handle_irq_event() * driver_handler() * apic_eoi() @@ -1322,7 +1322,7 @@ static struct irq_chip intel_ir_chip = { */ static struct irq_chip intel_ir_chip_post_msi = { .name = "INTEL-IR-POST", - .irq_ack = irq_move_irq, + .irq_ack = intel_ack_posted_msi_irq, .irq_set_affinity = intel_ir_set_affinity, .irq_compose_msi_msg = intel_ir_compose_msi_msg, .irq_set_vcpu_affinity = intel_ir_set_vcpu_affinity,
diff --git a/include/linux/mm_types.h b/include/linux/mm_types.h index 9f6de06..42af229 100644 --- a/include/linux/mm_types.h +++ b/include/linux/mm_types.h
@@ -1631,7 +1631,6 @@ enum tlb_flush_reason { TLB_LOCAL_MM_SHOOTDOWN, TLB_REMOTE_SEND_IPI, TLB_REMOTE_WRONG_CPU, - NR_TLB_FLUSH_REASONS, }; /**
diff --git a/include/trace/events/tlb.h b/include/trace/events/tlb.h index b4d8e7d..fb83695 100644 --- a/include/trace/events/tlb.h +++ b/include/trace/events/tlb.h
@@ -12,8 +12,9 @@ EM( TLB_FLUSH_ON_TASK_SWITCH, "flush on task switch" ) \ EM( TLB_REMOTE_SHOOTDOWN, "remote shootdown" ) \ EM( TLB_LOCAL_SHOOTDOWN, "local shootdown" ) \ - EM( TLB_LOCAL_MM_SHOOTDOWN, "local mm shootdown" ) \ - EMe( TLB_REMOTE_SEND_IPI, "remote ipi send" ) + EM( TLB_LOCAL_MM_SHOOTDOWN, "local MM shootdown" ) \ + EM( TLB_REMOTE_SEND_IPI, "remote IPI send" ) \ + EMe( TLB_REMOTE_WRONG_CPU, "remote wrong CPU" ) /* * First define the enums in TLB_FLUSH_REASON to be exported to userspace
diff --git a/include/uapi/linux/input-event-codes.h b/include/uapi/linux/input-event-codes.h index 30f3c9e..4bdb6a1 100644 --- a/include/uapi/linux/input-event-codes.h +++ b/include/uapi/linux/input-event-codes.h
@@ -891,6 +891,7 @@ #define ABS_VOLUME 0x20 #define ABS_PROFILE 0x21 +#define ABS_SND_PROFILE 0x22 #define ABS_MISC 0x28 @@ -1000,4 +1001,12 @@ #define SND_MAX 0x07 #define SND_CNT (SND_MAX+1) +/* + * ABS_SND_PROFILE values + */ + +#define SND_PROFILE_SILENT 0x00 +#define SND_PROFILE_VIBRATE 0x01 +#define SND_PROFILE_RING 0x02 + #endif
diff --git a/kernel/irq/manage.c b/kernel/irq/manage.c index 8b1b4c8..349ae797 100644 --- a/kernel/irq/manage.c +++ b/kernel/irq/manage.c
@@ -1414,7 +1414,7 @@ setup_irq_thread(struct irqaction *new, unsigned int irq, bool secondary) * Ensure the thread adjusts the affinity once it reaches the * thread function. */ - new->thread_flags = BIT(IRQTF_AFFINITY); + set_bit(IRQTF_AFFINITY, &new->thread_flags); return 0; }