| // SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| /* |
| * Copyright (c) 2023 BayLibre, SAS. |
| * Author: Jerome Brunet <jbrunet@baylibre.com> |
| */ |
| |
| #include <dt-bindings/clock/g12a-clkc.h> |
| #include <dt-bindings/input/input.h> |
| #include <dt-bindings/leds/common.h> |
| #include <dt-bindings/gpio/gpio.h> |
| #include <dt-bindings/gpio/meson-g12a-gpio.h> |
| #include <dt-bindings/sound/meson-g12a-toacodec.h> |
| #include <dt-bindings/sound/meson-g12a-tohdmitx.h> |
| |
| / { |
| aliases { |
| serial0 = &uart_AO; |
| ethernet0 = ðmac; |
| spi0 = &spifc; |
| }; |
| |
| memory@0 { |
| device_type = "memory"; |
| reg = <0x0 0x0 0x0 0x80000000>; |
| }; |
| |
| chosen { |
| stdout-path = "serial0:115200n8"; |
| }; |
| |
| dioo2133: audio-amplifier-0 { |
| compatible = "simple-audio-amplifier"; |
| enable-gpios = <&gpio GPIOX_0 GPIO_ACTIVE_HIGH>; |
| VCC-supply = <&vcc_5v>; |
| sound-name-prefix = "10U2"; |
| }; |
| |
| /* TOFIX: handle CVBS_DET on SARADC channel 0 */ |
| cvbs-connector { |
| compatible = "composite-video-connector"; |
| |
| port { |
| cvbs_connector_in: endpoint { |
| remote-endpoint = <&cvbs_vdac_out>; |
| }; |
| }; |
| }; |
| |
| emmc_pwrseq: emmc-pwrseq { |
| compatible = "mmc-pwrseq-emmc"; |
| reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>; |
| }; |
| |
| hdmi-connector { |
| compatible = "hdmi-connector"; |
| type = "a"; |
| |
| port { |
| hdmi_connector_in: endpoint { |
| remote-endpoint = <&hdmi_tx_tmds_out>; |
| }; |
| }; |
| }; |
| |
| led-blue { |
| compatible = "pwm-leds"; |
| |
| led { |
| color = <LED_COLOR_ID_BLUE>; |
| function = LED_FUNCTION_ACTIVITY; |
| linux,default-trigger = "heartbeat"; |
| max-brightness = <255>; |
| pwms = <&pwm_ab 1 1250 0>; |
| active-low; |
| }; |
| }; |
| |
| led-green { |
| compatible = "pwm-leds"; |
| |
| led { |
| color = <LED_COLOR_ID_GREEN>; |
| function = LED_FUNCTION_STATUS; |
| linux,default-trigger = "default-on"; |
| max-brightness = <255>; |
| pwms = <&pwm_cd 1 1250 0>; |
| active-low; |
| }; |
| }; |
| |
| led-orange { |
| compatible = "gpio-leds"; |
| |
| led { |
| color = <LED_COLOR_ID_AMBER>; |
| function = LED_FUNCTION_STANDBY; |
| gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>; |
| panic-indicator; |
| }; |
| }; |
| |
| dc_in: regulator-dc-in { |
| compatible = "regulator-fixed"; |
| regulator-name = "5V_IN"; |
| regulator-min-microvolt = <5000000>; |
| regulator-max-microvolt = <5000000>; |
| regulator-always-on; |
| }; |
| |
| flash_1v8: regulator-flash-1v8 { |
| compatible = "regulator-fixed"; |
| regulator-name = "FLASH_1V8"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| regulator-always-on; |
| vin-supply = <&vcc_3v3>; |
| }; |
| |
| vcc_card: regulator-vcc-card { |
| compatible = "regulator-fixed"; |
| regulator-name = "VCC_CARD"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| vin-supply = <&vddao_3v3>; |
| gpio = <&gpio GPIOX_2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; |
| enable-active-high; |
| gpio-open-drain; |
| }; |
| |
| vcc_3v3: regulator-vcc-3v3 { |
| compatible = "regulator-fixed"; |
| regulator-name = "VCC_3V3"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-always-on; |
| vin-supply = <&vddao_3v3>; |
| |
| /* FIXME: controlled by TEST_N */ |
| }; |
| |
| vcc_5v: regulator-vcc-5v { |
| compatible = "regulator-fixed"; |
| regulator-name = "VCC_5V"; |
| regulator-min-microvolt = <5000000>; |
| regulator-max-microvolt = <5000000>; |
| regulator-always-on; |
| vin-supply = <&dc_in>; |
| gpio = <&gpio GPIOH_8 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; |
| enable-active-high; |
| gpio-open-drain; |
| }; |
| |
| vddao_3v3: regulator-vddao_3v3 { |
| compatible = "regulator-fixed"; |
| regulator-name = "VDDAO_3V3"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-always-on; |
| vin-supply = <&dc_in>; |
| }; |
| |
| vddcpu_b: regulator-vddcpu-b { |
| compatible = "pwm-regulator"; |
| regulator-name = "VDDCPU_B"; |
| regulator-min-microvolt = <730000>; |
| regulator-max-microvolt = <1011000>; |
| regulator-boot-on; |
| regulator-always-on; |
| pwm-supply = <&dc_in>; |
| pwms = <&pwm_AO_cd 1 1250 0>; |
| pwm-dutycycle-range = <100 0>; |
| }; |
| |
| vddio_ao18: regulator-vddio_ao18 { |
| compatible = "regulator-fixed"; |
| regulator-name = "VDDIO_AO18"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| regulator-always-on; |
| vin-supply = <&vddao_3v3>; |
| }; |
| |
| vddio_c: regulator-vddio_c { |
| compatible = "regulator-gpio"; |
| regulator-name = "VDDIO_C"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-settling-time-up-us = <200>; |
| regulator-settling-time-down-us = <50000>; |
| vin-supply = <&vddao_3v3>; |
| gpios = <&gpio GPIOX_4 GPIO_ACTIVE_HIGH>; |
| states = <3300000 0>, |
| <1800000 1>; |
| }; |
| |
| sound { |
| compatible = "amlogic,axg-sound-card"; |
| audio-widgets = "Line", "Lineout"; |
| audio-aux-devs = <&tdmout_a>, <&tdmout_b>, <&tdmout_c>, |
| <&tdmin_a>, <&tdmin_b>, <&tdmin_c>, |
| <&dioo2133>; |
| |
| assigned-clocks = <&clkc CLKID_MPLL2>, |
| <&clkc CLKID_MPLL0>, |
| <&clkc CLKID_MPLL1>; |
| assigned-clock-parents = <0>, <0>, <0>; |
| assigned-clock-rates = <294912000>, |
| <270950400>, |
| <393216000>; |
| |
| dai-link-0 { |
| sound-dai = <&frddr_a>; |
| }; |
| |
| dai-link-1 { |
| sound-dai = <&frddr_b>; |
| }; |
| |
| dai-link-2 { |
| sound-dai = <&frddr_c>; |
| }; |
| |
| dai-link-3 { |
| sound-dai = <&toddr_a>; |
| }; |
| |
| dai-link-4 { |
| sound-dai = <&toddr_b>; |
| }; |
| |
| dai-link-5 { |
| sound-dai = <&toddr_c>; |
| }; |
| |
| /* |
| * Audio setup: The 40 pins header provides access to 2 TDMs, |
| * SPDIF In/Out and PDM inputs. |
| * - TDM A: 2 lanes |
| * D0: 40/X9 |
| * D1: 38/X8 |
| * BCLK: 12/X11 |
| * FS: 35/X10 |
| * - TDM B: 4 lanes |
| * D0: 37/A3 |
| * D1: 16/A4 |
| * D2: 18/A5 or 7/AO6 |
| * D3: 22/A6 or 21/H5 |
| * BCLK: 29/A1 or 8/AO8 |
| * FS: 31/A2 or 11/AO7 |
| * - 2 Master Clocks: |
| * MCLK0: 15/A0 or 10/AO9 |
| * MCLK1: 33/X15 |
| * - SPDIF: |
| * OUT: 32/A11 |
| * IN: 21/H5 |
| * - PDM Input: |
| * DO: 13/A8 |
| * D1: 26/A9 |
| * D2: 22/A6 |
| * D3: 18/A5 |
| * DCLK: 36/A7 |
| * |
| * TDM C is not usable on the 40 pins connector so it is |
| * setup for the HDMI 4 lanes i2s. |
| * |
| * No pinctrl is enabled by default to preserve the |
| * genericity of the 40 pins header. Many configurations are |
| * possible based on the desired use case. Please adjust TDM |
| * masks, clock setups and pinctrl accordingly. |
| */ |
| |
| dai-link-6 { |
| sound-dai = <&tdmif_a>; |
| dai-format = "dsp_a"; |
| dai-tdm-slot-tx-mask-0 = <1 1>; |
| mclk-fs = <256>; |
| |
| codec-0 { |
| sound-dai = <&tohdmitx TOHDMITX_I2S_IN_A>; |
| }; |
| |
| codec-1 { |
| sound-dai = <&toacodec TOACODEC_IN_A>; |
| }; |
| }; |
| |
| dai-link-7 { |
| sound-dai = <&tdmif_b>; |
| dai-format = "i2s"; |
| dai-tdm-slot-tx-mask-0 = <1 1>; |
| dai-tdm-slot-rx-mask-1 = <1 1>; |
| mclk-fs = <256>; |
| |
| codec-0 { |
| sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>; |
| }; |
| |
| codec-1 { |
| sound-dai = <&toacodec TOACODEC_IN_B>; |
| }; |
| }; |
| |
| dai-link-8 { |
| sound-dai = <&tdmif_c>; |
| dai-format = "i2s"; |
| dai-tdm-slot-tx-mask-0 = <1 1>; |
| dai-tdm-slot-tx-mask-1 = <1 1>; |
| dai-tdm-slot-tx-mask-2 = <1 1>; |
| dai-tdm-slot-tx-mask-3 = <1 1>; |
| mclk-fs = <256>; |
| |
| codec-0 { |
| sound-dai = <&tohdmitx TOHDMITX_I2S_IN_C>; |
| }; |
| |
| codec-1 { |
| sound-dai = <&toacodec TOACODEC_IN_C>; |
| }; |
| }; |
| |
| dai-link-9 { |
| sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>; |
| |
| codec { |
| sound-dai = <&hdmi_tx>; |
| }; |
| }; |
| |
| dai-link-10 { |
| sound-dai = <&toacodec TOACODEC_OUT>; |
| |
| codec { |
| sound-dai = <&acodec>; |
| }; |
| }; |
| }; |
| }; |
| |
| &acodec { |
| status = "okay"; |
| AVDD-supply = <&vddio_ao18>; |
| }; |
| |
| &arb { |
| status = "okay"; |
| }; |
| |
| &cecb_AO { |
| status = "okay"; |
| pinctrl-0 = <&cec_ao_b_h_pins>; |
| pinctrl-names = "default"; |
| hdmi-phandle = <&hdmi_tx>; |
| }; |
| |
| &clkc_audio { |
| status = "okay"; |
| }; |
| |
| &cvbs_vdac_port { |
| cvbs_vdac_out: endpoint { |
| remote-endpoint = <&cvbs_connector_in>; |
| }; |
| }; |
| |
| &dwc3 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| hub: hub@1 { |
| compatible = "usb5e3,626"; |
| reg = <1>; |
| reset-gpios = <&gpio GPIOC_7 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>; |
| vdd-supply = <&vcc_5v>; |
| }; |
| }; |
| |
| ðmac { |
| pinctrl-0 = <ð_pins>, <ð_rgmii_pins>, <ð_phy_irq_pins>; |
| pinctrl-names = "default"; |
| status = "okay"; |
| phy-mode = "rgmii"; |
| phy-handle = <&external_phy>; |
| amlogic,tx-delay-ns = <2>; |
| }; |
| |
| &ext_mdio { |
| external_phy: ethernet-phy@0 { |
| /* Realtek RTL8211F (0x001cc916) */ |
| reg = <0>; |
| max-speed = <1000>; |
| |
| reset-assert-us = <100000>; |
| reset-deassert-us = <100000>; |
| reset-gpios = <&gpio GPIOZ_15 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>; |
| |
| interrupt-parent = <&gpio_intc>; |
| /* MAC_INTR on GPIOZ_14 */ |
| interrupts = <26 IRQ_TYPE_LEVEL_LOW>; |
| }; |
| }; |
| |
| &frddr_a { |
| status = "okay"; |
| }; |
| |
| &frddr_b { |
| status = "okay"; |
| }; |
| |
| &frddr_c { |
| status = "okay"; |
| }; |
| |
| &hdmi_tx { |
| status = "okay"; |
| pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>; |
| pinctrl-names = "default"; |
| hdmi-supply = <&vcc_5v>; |
| }; |
| |
| &hdmi_tx_tmds_port { |
| hdmi_tx_tmds_out: endpoint { |
| remote-endpoint = <&hdmi_connector_in>; |
| }; |
| }; |
| |
| &ir { |
| status = "okay"; |
| pinctrl-0 = <&remote_input_ao_pins>; |
| pinctrl-names = "default"; |
| }; |
| |
| &periphs_pinctrl { |
| spi_cs_disable_pins: spi-cs-disable { |
| mux { |
| groups = "BOOT_14"; |
| function = "gpio_periphs"; |
| bias-disable; |
| output-high; |
| }; |
| }; |
| |
| eth_phy_irq_pins: eth-phy-irq { |
| mux { |
| groups = "GPIOZ_14"; |
| function = "gpio_periphs"; |
| bias-pull-up; |
| output-disable; |
| }; |
| }; |
| }; |
| |
| &pwm_AO_cd { |
| status = "okay"; |
| pinctrl-0 = <&pwm_ao_d_e_pins>; |
| pinctrl-names = "default"; |
| clocks = <&xtal>; |
| clock-names = "clkin1"; |
| }; |
| |
| &pwm_ab { |
| status = "okay"; |
| pinctrl-0 = <&pwm_b_x7_pins>; |
| pinctrl-names = "default"; |
| clocks = <&xtal>; |
| clock-names = "clkin1"; |
| }; |
| |
| &pwm_cd { |
| status = "okay"; |
| pinctrl-0 = <&pwm_d_x3_pins>; |
| pinctrl-names = "default"; |
| clocks = <&xtal>; |
| clock-names = "clkin1"; |
| }; |
| |
| &saradc { |
| status = "okay"; |
| vref-supply = <&vddio_ao18>; |
| }; |
| |
| /* SD card */ |
| &sd_emmc_b { |
| status = "okay"; |
| pinctrl-0 = <&sdcard_c_pins>; |
| pinctrl-1 = <&sdcard_clk_gate_c_pins>; |
| pinctrl-names = "default", "clk-gate"; |
| |
| bus-width = <4>; |
| cap-sd-highspeed; |
| sd-uhs-sdr12; |
| sd-uhs-sdr25; |
| sd-uhs-sdr50; |
| sd-uhs-sdr104; |
| max-frequency = <200000000>; |
| disable-wp; |
| |
| cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>; |
| vmmc-supply = <&vcc_card>; |
| vqmmc-supply = <&vddio_c>; |
| }; |
| |
| /* |
| * EMMC_D4, EMMC_D5, EMMC_D6 and EMMC_D7 pins are shared between SPI NOR CS |
| * and eMMC Data 4 to 7 pins. |
| * Replace emmc_data_8b_pins to emmc_data_4b_pins from sd_emmc_c pinctrl-0, |
| * and change bus-width to 4 then spifc can be enabled. |
| */ |
| &sd_emmc_c { |
| status = "okay"; |
| pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>, |
| <&spi_cs_disable_pins>; |
| pinctrl-1 = <&emmc_clk_gate_pins>; |
| pinctrl-names = "default", "clk-gate"; |
| |
| bus-width = <8>; |
| cap-mmc-highspeed; |
| mmc-hs200-1_8v; |
| max-frequency = <200000000>; |
| disable-wp; |
| |
| mmc-pwrseq = <&emmc_pwrseq>; |
| vmmc-supply = <&vcc_3v3>; |
| vqmmc-supply = <&flash_1v8>; |
| }; |
| |
| &spifc { |
| status = "disabled"; |
| pinctrl-0 = <&nor_pins>; |
| pinctrl-names = "default"; |
| cs-gpios = <&gpio BOOT_14 GPIO_ACTIVE_LOW>; |
| |
| w25lq128d: flash@0 { |
| compatible = "jedec,spi-nor"; |
| reg = <0>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| spi-max-frequency = <80000000>; |
| }; |
| }; |
| |
| &tdmif_a { |
| status = "okay"; |
| }; |
| |
| &tdmif_b { |
| status = "okay"; |
| }; |
| |
| &tdmif_c { |
| status = "okay"; |
| }; |
| |
| &tdmin_a { |
| status = "okay"; |
| }; |
| |
| &tdmin_b { |
| status = "okay"; |
| }; |
| |
| &tdmin_c { |
| status = "okay"; |
| }; |
| |
| &tdmout_a { |
| status = "okay"; |
| }; |
| |
| &tdmout_b { |
| status = "okay"; |
| }; |
| |
| &tdmout_c { |
| status = "okay"; |
| }; |
| |
| &toacodec { |
| status = "okay"; |
| }; |
| |
| &toddr_a { |
| status = "okay"; |
| }; |
| |
| &toddr_b { |
| status = "okay"; |
| }; |
| |
| &toddr_c { |
| status = "okay"; |
| }; |
| |
| &tohdmitx { |
| status = "okay"; |
| }; |
| |
| &uart_AO { |
| status = "okay"; |
| pinctrl-0 = <&uart_ao_a_pins>; |
| pinctrl-names = "default"; |
| }; |
| |
| &usb2_phy1 { |
| phy-supply = <&dc_in>; |
| }; |
| |
| &usb3_pcie_phy { |
| phy-supply = <&vcc_5v>; |
| }; |
| |
| &usb { |
| status = "okay"; |
| }; |
