|  | // SPDX-License-Identifier: GPL-1.0+ | 
|  | /* | 
|  | * originally based on the dummy device. | 
|  | * | 
|  | * Copyright 1999, Thomas Davis, tadavis@lbl.gov. | 
|  | * Based on dummy.c, and eql.c devices. | 
|  | * | 
|  | * bonding.c: an Ethernet Bonding driver | 
|  | * | 
|  | * This is useful to talk to a Cisco EtherChannel compatible equipment: | 
|  | *	Cisco 5500 | 
|  | *	Sun Trunking (Solaris) | 
|  | *	Alteon AceDirector Trunks | 
|  | *	Linux Bonding | 
|  | *	and probably many L2 switches ... | 
|  | * | 
|  | * How it works: | 
|  | *    ifconfig bond0 ipaddress netmask up | 
|  | *      will setup a network device, with an ip address.  No mac address | 
|  | *	will be assigned at this time.  The hw mac address will come from | 
|  | *	the first slave bonded to the channel.  All slaves will then use | 
|  | *	this hw mac address. | 
|  | * | 
|  | *    ifconfig bond0 down | 
|  | *         will release all slaves, marking them as down. | 
|  | * | 
|  | *    ifenslave bond0 eth0 | 
|  | *	will attach eth0 to bond0 as a slave.  eth0 hw mac address will either | 
|  | *	a: be used as initial mac address | 
|  | *	b: if a hw mac address already is there, eth0's hw mac address | 
|  | *	   will then be set from bond0. | 
|  | * | 
|  | */ | 
|  |  | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/types.h> | 
|  | #include <linux/fcntl.h> | 
|  | #include <linux/filter.h> | 
|  | #include <linux/interrupt.h> | 
|  | #include <linux/ptrace.h> | 
|  | #include <linux/ioport.h> | 
|  | #include <linux/in.h> | 
|  | #include <net/ip.h> | 
|  | #include <linux/ip.h> | 
|  | #include <linux/icmp.h> | 
|  | #include <linux/icmpv6.h> | 
|  | #include <linux/tcp.h> | 
|  | #include <linux/udp.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/string.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/timer.h> | 
|  | #include <linux/socket.h> | 
|  | #include <linux/ctype.h> | 
|  | #include <linux/inet.h> | 
|  | #include <linux/bitops.h> | 
|  | #include <linux/io.h> | 
|  | #include <asm/dma.h> | 
|  | #include <linux/uaccess.h> | 
|  | #include <linux/errno.h> | 
|  | #include <linux/netdevice.h> | 
|  | #include <linux/inetdevice.h> | 
|  | #include <linux/igmp.h> | 
|  | #include <linux/etherdevice.h> | 
|  | #include <linux/skbuff.h> | 
|  | #include <net/sock.h> | 
|  | #include <linux/rtnetlink.h> | 
|  | #include <linux/smp.h> | 
|  | #include <linux/if_ether.h> | 
|  | #include <net/arp.h> | 
|  | #include <linux/mii.h> | 
|  | #include <linux/ethtool.h> | 
|  | #include <linux/if_vlan.h> | 
|  | #include <linux/if_bonding.h> | 
|  | #include <linux/phy.h> | 
|  | #include <linux/jiffies.h> | 
|  | #include <linux/preempt.h> | 
|  | #include <net/route.h> | 
|  | #include <net/net_namespace.h> | 
|  | #include <net/netns/generic.h> | 
|  | #include <net/pkt_sched.h> | 
|  | #include <linux/rculist.h> | 
|  | #include <net/flow_dissector.h> | 
|  | #include <net/xfrm.h> | 
|  | #include <net/bonding.h> | 
|  | #include <net/bond_3ad.h> | 
|  | #include <net/bond_alb.h> | 
|  | #if IS_ENABLED(CONFIG_TLS_DEVICE) | 
|  | #include <net/tls.h> | 
|  | #endif | 
|  | #include <net/ip6_route.h> | 
|  | #include <net/xdp.h> | 
|  |  | 
|  | #include "bonding_priv.h" | 
|  |  | 
|  | /*---------------------------- Module parameters ----------------------------*/ | 
|  |  | 
|  | /* monitor all links that often (in milliseconds). <=0 disables monitoring */ | 
|  |  | 
|  | static int max_bonds	= BOND_DEFAULT_MAX_BONDS; | 
|  | static int tx_queues	= BOND_DEFAULT_TX_QUEUES; | 
|  | static int num_peer_notif = 1; | 
|  | static int miimon; | 
|  | static int updelay; | 
|  | static int downdelay; | 
|  | static int use_carrier	= 1; | 
|  | static char *mode; | 
|  | static char *primary; | 
|  | static char *primary_reselect; | 
|  | static char *lacp_rate; | 
|  | static int min_links; | 
|  | static char *ad_select; | 
|  | static char *xmit_hash_policy; | 
|  | static int arp_interval; | 
|  | static char *arp_ip_target[BOND_MAX_ARP_TARGETS]; | 
|  | static char *arp_validate; | 
|  | static char *arp_all_targets; | 
|  | static char *fail_over_mac; | 
|  | static int all_slaves_active; | 
|  | static struct bond_params bonding_defaults; | 
|  | static int resend_igmp = BOND_DEFAULT_RESEND_IGMP; | 
|  | static int packets_per_slave = 1; | 
|  | static int lp_interval = BOND_ALB_DEFAULT_LP_INTERVAL; | 
|  |  | 
|  | module_param(max_bonds, int, 0); | 
|  | MODULE_PARM_DESC(max_bonds, "Max number of bonded devices"); | 
|  | module_param(tx_queues, int, 0); | 
|  | MODULE_PARM_DESC(tx_queues, "Max number of transmit queues (default = 16)"); | 
|  | module_param_named(num_grat_arp, num_peer_notif, int, 0644); | 
|  | MODULE_PARM_DESC(num_grat_arp, "Number of peer notifications to send on " | 
|  | "failover event (alias of num_unsol_na)"); | 
|  | module_param_named(num_unsol_na, num_peer_notif, int, 0644); | 
|  | MODULE_PARM_DESC(num_unsol_na, "Number of peer notifications to send on " | 
|  | "failover event (alias of num_grat_arp)"); | 
|  | module_param(miimon, int, 0); | 
|  | MODULE_PARM_DESC(miimon, "Link check interval in milliseconds"); | 
|  | module_param(updelay, int, 0); | 
|  | MODULE_PARM_DESC(updelay, "Delay before considering link up, in milliseconds"); | 
|  | module_param(downdelay, int, 0); | 
|  | MODULE_PARM_DESC(downdelay, "Delay before considering link down, " | 
|  | "in milliseconds"); | 
|  | module_param(use_carrier, int, 0); | 
|  | MODULE_PARM_DESC(use_carrier, "Use netif_carrier_ok (vs MII ioctls) in miimon; " | 
|  | "0 for off, 1 for on (default)"); | 
|  | module_param(mode, charp, 0); | 
|  | MODULE_PARM_DESC(mode, "Mode of operation; 0 for balance-rr, " | 
|  | "1 for active-backup, 2 for balance-xor, " | 
|  | "3 for broadcast, 4 for 802.3ad, 5 for balance-tlb, " | 
|  | "6 for balance-alb"); | 
|  | module_param(primary, charp, 0); | 
|  | MODULE_PARM_DESC(primary, "Primary network device to use"); | 
|  | module_param(primary_reselect, charp, 0); | 
|  | MODULE_PARM_DESC(primary_reselect, "Reselect primary slave " | 
|  | "once it comes up; " | 
|  | "0 for always (default), " | 
|  | "1 for only if speed of primary is " | 
|  | "better, " | 
|  | "2 for only on active slave " | 
|  | "failure"); | 
|  | module_param(lacp_rate, charp, 0); | 
|  | MODULE_PARM_DESC(lacp_rate, "LACPDU tx rate to request from 802.3ad partner; " | 
|  | "0 for slow, 1 for fast"); | 
|  | module_param(ad_select, charp, 0); | 
|  | MODULE_PARM_DESC(ad_select, "802.3ad aggregation selection logic; " | 
|  | "0 for stable (default), 1 for bandwidth, " | 
|  | "2 for count"); | 
|  | module_param(min_links, int, 0); | 
|  | MODULE_PARM_DESC(min_links, "Minimum number of available links before turning on carrier"); | 
|  |  | 
|  | module_param(xmit_hash_policy, charp, 0); | 
|  | MODULE_PARM_DESC(xmit_hash_policy, "balance-alb, balance-tlb, balance-xor, 802.3ad hashing method; " | 
|  | "0 for layer 2 (default), 1 for layer 3+4, " | 
|  | "2 for layer 2+3, 3 for encap layer 2+3, " | 
|  | "4 for encap layer 3+4, 5 for vlan+srcmac"); | 
|  | module_param(arp_interval, int, 0); | 
|  | MODULE_PARM_DESC(arp_interval, "arp interval in milliseconds"); | 
|  | module_param_array(arp_ip_target, charp, NULL, 0); | 
|  | MODULE_PARM_DESC(arp_ip_target, "arp targets in n.n.n.n form"); | 
|  | module_param(arp_validate, charp, 0); | 
|  | MODULE_PARM_DESC(arp_validate, "validate src/dst of ARP probes; " | 
|  | "0 for none (default), 1 for active, " | 
|  | "2 for backup, 3 for all"); | 
|  | module_param(arp_all_targets, charp, 0); | 
|  | MODULE_PARM_DESC(arp_all_targets, "fail on any/all arp targets timeout; 0 for any (default), 1 for all"); | 
|  | module_param(fail_over_mac, charp, 0); | 
|  | MODULE_PARM_DESC(fail_over_mac, "For active-backup, do not set all slaves to " | 
|  | "the same MAC; 0 for none (default), " | 
|  | "1 for active, 2 for follow"); | 
|  | module_param(all_slaves_active, int, 0); | 
|  | MODULE_PARM_DESC(all_slaves_active, "Keep all frames received on an interface " | 
|  | "by setting active flag for all slaves; " | 
|  | "0 for never (default), 1 for always."); | 
|  | module_param(resend_igmp, int, 0); | 
|  | MODULE_PARM_DESC(resend_igmp, "Number of IGMP membership reports to send on " | 
|  | "link failure"); | 
|  | module_param(packets_per_slave, int, 0); | 
|  | MODULE_PARM_DESC(packets_per_slave, "Packets to send per slave in balance-rr " | 
|  | "mode; 0 for a random slave, 1 packet per " | 
|  | "slave (default), >1 packets per slave."); | 
|  | module_param(lp_interval, uint, 0); | 
|  | MODULE_PARM_DESC(lp_interval, "The number of seconds between instances where " | 
|  | "the bonding driver sends learning packets to " | 
|  | "each slaves peer switch. The default is 1."); | 
|  |  | 
|  | /*----------------------------- Global variables ----------------------------*/ | 
|  |  | 
|  | #ifdef CONFIG_NET_POLL_CONTROLLER | 
|  | atomic_t netpoll_block_tx = ATOMIC_INIT(0); | 
|  | #endif | 
|  |  | 
|  | unsigned int bond_net_id __read_mostly; | 
|  |  | 
|  | static const struct flow_dissector_key flow_keys_bonding_keys[] = { | 
|  | { | 
|  | .key_id = FLOW_DISSECTOR_KEY_CONTROL, | 
|  | .offset = offsetof(struct flow_keys, control), | 
|  | }, | 
|  | { | 
|  | .key_id = FLOW_DISSECTOR_KEY_BASIC, | 
|  | .offset = offsetof(struct flow_keys, basic), | 
|  | }, | 
|  | { | 
|  | .key_id = FLOW_DISSECTOR_KEY_IPV4_ADDRS, | 
|  | .offset = offsetof(struct flow_keys, addrs.v4addrs), | 
|  | }, | 
|  | { | 
|  | .key_id = FLOW_DISSECTOR_KEY_IPV6_ADDRS, | 
|  | .offset = offsetof(struct flow_keys, addrs.v6addrs), | 
|  | }, | 
|  | { | 
|  | .key_id = FLOW_DISSECTOR_KEY_TIPC, | 
|  | .offset = offsetof(struct flow_keys, addrs.tipckey), | 
|  | }, | 
|  | { | 
|  | .key_id = FLOW_DISSECTOR_KEY_PORTS, | 
|  | .offset = offsetof(struct flow_keys, ports), | 
|  | }, | 
|  | { | 
|  | .key_id = FLOW_DISSECTOR_KEY_ICMP, | 
|  | .offset = offsetof(struct flow_keys, icmp), | 
|  | }, | 
|  | { | 
|  | .key_id = FLOW_DISSECTOR_KEY_VLAN, | 
|  | .offset = offsetof(struct flow_keys, vlan), | 
|  | }, | 
|  | { | 
|  | .key_id = FLOW_DISSECTOR_KEY_FLOW_LABEL, | 
|  | .offset = offsetof(struct flow_keys, tags), | 
|  | }, | 
|  | { | 
|  | .key_id = FLOW_DISSECTOR_KEY_GRE_KEYID, | 
|  | .offset = offsetof(struct flow_keys, keyid), | 
|  | }, | 
|  | }; | 
|  |  | 
|  | static struct flow_dissector flow_keys_bonding __read_mostly; | 
|  |  | 
|  | /*-------------------------- Forward declarations ---------------------------*/ | 
|  |  | 
|  | static int bond_init(struct net_device *bond_dev); | 
|  | static void bond_uninit(struct net_device *bond_dev); | 
|  | static void bond_get_stats(struct net_device *bond_dev, | 
|  | struct rtnl_link_stats64 *stats); | 
|  | static void bond_slave_arr_handler(struct work_struct *work); | 
|  | static bool bond_time_in_interval(struct bonding *bond, unsigned long last_act, | 
|  | int mod); | 
|  | static void bond_netdev_notify_work(struct work_struct *work); | 
|  |  | 
|  | /*---------------------------- General routines -----------------------------*/ | 
|  |  | 
|  | const char *bond_mode_name(int mode) | 
|  | { | 
|  | static const char *names[] = { | 
|  | [BOND_MODE_ROUNDROBIN] = "load balancing (round-robin)", | 
|  | [BOND_MODE_ACTIVEBACKUP] = "fault-tolerance (active-backup)", | 
|  | [BOND_MODE_XOR] = "load balancing (xor)", | 
|  | [BOND_MODE_BROADCAST] = "fault-tolerance (broadcast)", | 
|  | [BOND_MODE_8023AD] = "IEEE 802.3ad Dynamic link aggregation", | 
|  | [BOND_MODE_TLB] = "transmit load balancing", | 
|  | [BOND_MODE_ALB] = "adaptive load balancing", | 
|  | }; | 
|  |  | 
|  | if (mode < BOND_MODE_ROUNDROBIN || mode > BOND_MODE_ALB) | 
|  | return "unknown"; | 
|  |  | 
|  | return names[mode]; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * bond_dev_queue_xmit - Prepare skb for xmit. | 
|  | * | 
|  | * @bond: bond device that got this skb for tx. | 
|  | * @skb: hw accel VLAN tagged skb to transmit | 
|  | * @slave_dev: slave that is supposed to xmit this skbuff | 
|  | */ | 
|  | netdev_tx_t bond_dev_queue_xmit(struct bonding *bond, struct sk_buff *skb, | 
|  | struct net_device *slave_dev) | 
|  | { | 
|  | skb->dev = slave_dev; | 
|  |  | 
|  | BUILD_BUG_ON(sizeof(skb->queue_mapping) != | 
|  | sizeof(qdisc_skb_cb(skb)->slave_dev_queue_mapping)); | 
|  | skb_set_queue_mapping(skb, qdisc_skb_cb(skb)->slave_dev_queue_mapping); | 
|  |  | 
|  | if (unlikely(netpoll_tx_running(bond->dev))) | 
|  | return bond_netpoll_send_skb(bond_get_slave_by_dev(bond, slave_dev), skb); | 
|  |  | 
|  | return dev_queue_xmit(skb); | 
|  | } | 
|  |  | 
|  | static bool bond_sk_check(struct bonding *bond) | 
|  | { | 
|  | switch (BOND_MODE(bond)) { | 
|  | case BOND_MODE_8023AD: | 
|  | case BOND_MODE_XOR: | 
|  | if (bond->params.xmit_policy == BOND_XMIT_POLICY_LAYER34) | 
|  | return true; | 
|  | fallthrough; | 
|  | default: | 
|  | return false; | 
|  | } | 
|  | } | 
|  |  | 
|  | static bool bond_xdp_check(struct bonding *bond) | 
|  | { | 
|  | switch (BOND_MODE(bond)) { | 
|  | case BOND_MODE_ROUNDROBIN: | 
|  | case BOND_MODE_ACTIVEBACKUP: | 
|  | return true; | 
|  | case BOND_MODE_8023AD: | 
|  | case BOND_MODE_XOR: | 
|  | /* vlan+srcmac is not supported with XDP as in most cases the 802.1q | 
|  | * payload is not in the packet due to hardware offload. | 
|  | */ | 
|  | if (bond->params.xmit_policy != BOND_XMIT_POLICY_VLAN_SRCMAC) | 
|  | return true; | 
|  | fallthrough; | 
|  | default: | 
|  | return false; | 
|  | } | 
|  | } | 
|  |  | 
|  | /*---------------------------------- VLAN -----------------------------------*/ | 
|  |  | 
|  | /* In the following 2 functions, bond_vlan_rx_add_vid and bond_vlan_rx_kill_vid, | 
|  | * We don't protect the slave list iteration with a lock because: | 
|  | * a. This operation is performed in IOCTL context, | 
|  | * b. The operation is protected by the RTNL semaphore in the 8021q code, | 
|  | * c. Holding a lock with BH disabled while directly calling a base driver | 
|  | *    entry point is generally a BAD idea. | 
|  | * | 
|  | * The design of synchronization/protection for this operation in the 8021q | 
|  | * module is good for one or more VLAN devices over a single physical device | 
|  | * and cannot be extended for a teaming solution like bonding, so there is a | 
|  | * potential race condition here where a net device from the vlan group might | 
|  | * be referenced (either by a base driver or the 8021q code) while it is being | 
|  | * removed from the system. However, it turns out we're not making matters | 
|  | * worse, and if it works for regular VLAN usage it will work here too. | 
|  | */ | 
|  |  | 
|  | /** | 
|  | * bond_vlan_rx_add_vid - Propagates adding an id to slaves | 
|  | * @bond_dev: bonding net device that got called | 
|  | * @proto: network protocol ID | 
|  | * @vid: vlan id being added | 
|  | */ | 
|  | static int bond_vlan_rx_add_vid(struct net_device *bond_dev, | 
|  | __be16 proto, u16 vid) | 
|  | { | 
|  | struct bonding *bond = netdev_priv(bond_dev); | 
|  | struct slave *slave, *rollback_slave; | 
|  | struct list_head *iter; | 
|  | int res; | 
|  |  | 
|  | bond_for_each_slave(bond, slave, iter) { | 
|  | res = vlan_vid_add(slave->dev, proto, vid); | 
|  | if (res) | 
|  | goto unwind; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | unwind: | 
|  | /* unwind to the slave that failed */ | 
|  | bond_for_each_slave(bond, rollback_slave, iter) { | 
|  | if (rollback_slave == slave) | 
|  | break; | 
|  |  | 
|  | vlan_vid_del(rollback_slave->dev, proto, vid); | 
|  | } | 
|  |  | 
|  | return res; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * bond_vlan_rx_kill_vid - Propagates deleting an id to slaves | 
|  | * @bond_dev: bonding net device that got called | 
|  | * @proto: network protocol ID | 
|  | * @vid: vlan id being removed | 
|  | */ | 
|  | static int bond_vlan_rx_kill_vid(struct net_device *bond_dev, | 
|  | __be16 proto, u16 vid) | 
|  | { | 
|  | struct bonding *bond = netdev_priv(bond_dev); | 
|  | struct list_head *iter; | 
|  | struct slave *slave; | 
|  |  | 
|  | bond_for_each_slave(bond, slave, iter) | 
|  | vlan_vid_del(slave->dev, proto, vid); | 
|  |  | 
|  | if (bond_is_lb(bond)) | 
|  | bond_alb_clear_vlan(bond, vid); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /*---------------------------------- XFRM -----------------------------------*/ | 
|  |  | 
|  | #ifdef CONFIG_XFRM_OFFLOAD | 
|  | /** | 
|  | * bond_ipsec_add_sa - program device with a security association | 
|  | * @xs: pointer to transformer state struct | 
|  | * @extack: extack point to fill failure reason | 
|  | **/ | 
|  | static int bond_ipsec_add_sa(struct xfrm_state *xs, | 
|  | struct netlink_ext_ack *extack) | 
|  | { | 
|  | struct net_device *bond_dev = xs->xso.dev; | 
|  | struct bond_ipsec *ipsec; | 
|  | struct bonding *bond; | 
|  | struct slave *slave; | 
|  | int err; | 
|  |  | 
|  | if (!bond_dev) | 
|  | return -EINVAL; | 
|  |  | 
|  | rcu_read_lock(); | 
|  | bond = netdev_priv(bond_dev); | 
|  | slave = rcu_dereference(bond->curr_active_slave); | 
|  | if (!slave) { | 
|  | rcu_read_unlock(); | 
|  | return -ENODEV; | 
|  | } | 
|  |  | 
|  | if (!slave->dev->xfrmdev_ops || | 
|  | !slave->dev->xfrmdev_ops->xdo_dev_state_add || | 
|  | netif_is_bond_master(slave->dev)) { | 
|  | NL_SET_ERR_MSG_MOD(extack, "Slave does not support ipsec offload"); | 
|  | rcu_read_unlock(); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | ipsec = kmalloc(sizeof(*ipsec), GFP_ATOMIC); | 
|  | if (!ipsec) { | 
|  | rcu_read_unlock(); | 
|  | return -ENOMEM; | 
|  | } | 
|  | xs->xso.real_dev = slave->dev; | 
|  |  | 
|  | err = slave->dev->xfrmdev_ops->xdo_dev_state_add(xs, extack); | 
|  | if (!err) { | 
|  | ipsec->xs = xs; | 
|  | INIT_LIST_HEAD(&ipsec->list); | 
|  | spin_lock_bh(&bond->ipsec_lock); | 
|  | list_add(&ipsec->list, &bond->ipsec_list); | 
|  | spin_unlock_bh(&bond->ipsec_lock); | 
|  | } else { | 
|  | kfree(ipsec); | 
|  | } | 
|  | rcu_read_unlock(); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | static void bond_ipsec_add_sa_all(struct bonding *bond) | 
|  | { | 
|  | struct net_device *bond_dev = bond->dev; | 
|  | struct bond_ipsec *ipsec; | 
|  | struct slave *slave; | 
|  |  | 
|  | rcu_read_lock(); | 
|  | slave = rcu_dereference(bond->curr_active_slave); | 
|  | if (!slave) | 
|  | goto out; | 
|  |  | 
|  | if (!slave->dev->xfrmdev_ops || | 
|  | !slave->dev->xfrmdev_ops->xdo_dev_state_add || | 
|  | netif_is_bond_master(slave->dev)) { | 
|  | spin_lock_bh(&bond->ipsec_lock); | 
|  | if (!list_empty(&bond->ipsec_list)) | 
|  | slave_warn(bond_dev, slave->dev, | 
|  | "%s: no slave xdo_dev_state_add\n", | 
|  | __func__); | 
|  | spin_unlock_bh(&bond->ipsec_lock); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | spin_lock_bh(&bond->ipsec_lock); | 
|  | list_for_each_entry(ipsec, &bond->ipsec_list, list) { | 
|  | ipsec->xs->xso.real_dev = slave->dev; | 
|  | if (slave->dev->xfrmdev_ops->xdo_dev_state_add(ipsec->xs, NULL)) { | 
|  | slave_warn(bond_dev, slave->dev, "%s: failed to add SA\n", __func__); | 
|  | ipsec->xs->xso.real_dev = NULL; | 
|  | } | 
|  | } | 
|  | spin_unlock_bh(&bond->ipsec_lock); | 
|  | out: | 
|  | rcu_read_unlock(); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * bond_ipsec_del_sa - clear out this specific SA | 
|  | * @xs: pointer to transformer state struct | 
|  | **/ | 
|  | static void bond_ipsec_del_sa(struct xfrm_state *xs) | 
|  | { | 
|  | struct net_device *bond_dev = xs->xso.dev; | 
|  | struct bond_ipsec *ipsec; | 
|  | struct bonding *bond; | 
|  | struct slave *slave; | 
|  |  | 
|  | if (!bond_dev) | 
|  | return; | 
|  |  | 
|  | rcu_read_lock(); | 
|  | bond = netdev_priv(bond_dev); | 
|  | slave = rcu_dereference(bond->curr_active_slave); | 
|  |  | 
|  | if (!slave) | 
|  | goto out; | 
|  |  | 
|  | if (!xs->xso.real_dev) | 
|  | goto out; | 
|  |  | 
|  | WARN_ON(xs->xso.real_dev != slave->dev); | 
|  |  | 
|  | if (!slave->dev->xfrmdev_ops || | 
|  | !slave->dev->xfrmdev_ops->xdo_dev_state_delete || | 
|  | netif_is_bond_master(slave->dev)) { | 
|  | slave_warn(bond_dev, slave->dev, "%s: no slave xdo_dev_state_delete\n", __func__); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | slave->dev->xfrmdev_ops->xdo_dev_state_delete(xs); | 
|  | out: | 
|  | spin_lock_bh(&bond->ipsec_lock); | 
|  | list_for_each_entry(ipsec, &bond->ipsec_list, list) { | 
|  | if (ipsec->xs == xs) { | 
|  | list_del(&ipsec->list); | 
|  | kfree(ipsec); | 
|  | break; | 
|  | } | 
|  | } | 
|  | spin_unlock_bh(&bond->ipsec_lock); | 
|  | rcu_read_unlock(); | 
|  | } | 
|  |  | 
|  | static void bond_ipsec_del_sa_all(struct bonding *bond) | 
|  | { | 
|  | struct net_device *bond_dev = bond->dev; | 
|  | struct bond_ipsec *ipsec; | 
|  | struct slave *slave; | 
|  |  | 
|  | rcu_read_lock(); | 
|  | slave = rcu_dereference(bond->curr_active_slave); | 
|  | if (!slave) { | 
|  | rcu_read_unlock(); | 
|  | return; | 
|  | } | 
|  |  | 
|  | spin_lock_bh(&bond->ipsec_lock); | 
|  | list_for_each_entry(ipsec, &bond->ipsec_list, list) { | 
|  | if (!ipsec->xs->xso.real_dev) | 
|  | continue; | 
|  |  | 
|  | if (!slave->dev->xfrmdev_ops || | 
|  | !slave->dev->xfrmdev_ops->xdo_dev_state_delete || | 
|  | netif_is_bond_master(slave->dev)) { | 
|  | slave_warn(bond_dev, slave->dev, | 
|  | "%s: no slave xdo_dev_state_delete\n", | 
|  | __func__); | 
|  | } else { | 
|  | slave->dev->xfrmdev_ops->xdo_dev_state_delete(ipsec->xs); | 
|  | } | 
|  | ipsec->xs->xso.real_dev = NULL; | 
|  | } | 
|  | spin_unlock_bh(&bond->ipsec_lock); | 
|  | rcu_read_unlock(); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * bond_ipsec_offload_ok - can this packet use the xfrm hw offload | 
|  | * @skb: current data packet | 
|  | * @xs: pointer to transformer state struct | 
|  | **/ | 
|  | static bool bond_ipsec_offload_ok(struct sk_buff *skb, struct xfrm_state *xs) | 
|  | { | 
|  | struct net_device *bond_dev = xs->xso.dev; | 
|  | struct net_device *real_dev; | 
|  | struct slave *curr_active; | 
|  | struct bonding *bond; | 
|  | int err; | 
|  |  | 
|  | bond = netdev_priv(bond_dev); | 
|  | rcu_read_lock(); | 
|  | curr_active = rcu_dereference(bond->curr_active_slave); | 
|  | real_dev = curr_active->dev; | 
|  |  | 
|  | if (BOND_MODE(bond) != BOND_MODE_ACTIVEBACKUP) { | 
|  | err = false; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | if (!xs->xso.real_dev) { | 
|  | err = false; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | if (!real_dev->xfrmdev_ops || | 
|  | !real_dev->xfrmdev_ops->xdo_dev_offload_ok || | 
|  | netif_is_bond_master(real_dev)) { | 
|  | err = false; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | err = real_dev->xfrmdev_ops->xdo_dev_offload_ok(skb, xs); | 
|  | out: | 
|  | rcu_read_unlock(); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | static const struct xfrmdev_ops bond_xfrmdev_ops = { | 
|  | .xdo_dev_state_add = bond_ipsec_add_sa, | 
|  | .xdo_dev_state_delete = bond_ipsec_del_sa, | 
|  | .xdo_dev_offload_ok = bond_ipsec_offload_ok, | 
|  | }; | 
|  | #endif /* CONFIG_XFRM_OFFLOAD */ | 
|  |  | 
|  | /*------------------------------- Link status -------------------------------*/ | 
|  |  | 
|  | /* Set the carrier state for the master according to the state of its | 
|  | * slaves.  If any slaves are up, the master is up.  In 802.3ad mode, | 
|  | * do special 802.3ad magic. | 
|  | * | 
|  | * Returns zero if carrier state does not change, nonzero if it does. | 
|  | */ | 
|  | int bond_set_carrier(struct bonding *bond) | 
|  | { | 
|  | struct list_head *iter; | 
|  | struct slave *slave; | 
|  |  | 
|  | if (!bond_has_slaves(bond)) | 
|  | goto down; | 
|  |  | 
|  | if (BOND_MODE(bond) == BOND_MODE_8023AD) | 
|  | return bond_3ad_set_carrier(bond); | 
|  |  | 
|  | bond_for_each_slave(bond, slave, iter) { | 
|  | if (slave->link == BOND_LINK_UP) { | 
|  | if (!netif_carrier_ok(bond->dev)) { | 
|  | netif_carrier_on(bond->dev); | 
|  | return 1; | 
|  | } | 
|  | return 0; | 
|  | } | 
|  | } | 
|  |  | 
|  | down: | 
|  | if (netif_carrier_ok(bond->dev)) { | 
|  | netif_carrier_off(bond->dev); | 
|  | return 1; | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* Get link speed and duplex from the slave's base driver | 
|  | * using ethtool. If for some reason the call fails or the | 
|  | * values are invalid, set speed and duplex to -1, | 
|  | * and return. Return 1 if speed or duplex settings are | 
|  | * UNKNOWN; 0 otherwise. | 
|  | */ | 
|  | static int bond_update_speed_duplex(struct slave *slave) | 
|  | { | 
|  | struct net_device *slave_dev = slave->dev; | 
|  | struct ethtool_link_ksettings ecmd; | 
|  | int res; | 
|  |  | 
|  | slave->speed = SPEED_UNKNOWN; | 
|  | slave->duplex = DUPLEX_UNKNOWN; | 
|  |  | 
|  | res = __ethtool_get_link_ksettings(slave_dev, &ecmd); | 
|  | if (res < 0) | 
|  | return 1; | 
|  | if (ecmd.base.speed == 0 || ecmd.base.speed == ((__u32)-1)) | 
|  | return 1; | 
|  | switch (ecmd.base.duplex) { | 
|  | case DUPLEX_FULL: | 
|  | case DUPLEX_HALF: | 
|  | break; | 
|  | default: | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | slave->speed = ecmd.base.speed; | 
|  | slave->duplex = ecmd.base.duplex; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | const char *bond_slave_link_status(s8 link) | 
|  | { | 
|  | switch (link) { | 
|  | case BOND_LINK_UP: | 
|  | return "up"; | 
|  | case BOND_LINK_FAIL: | 
|  | return "going down"; | 
|  | case BOND_LINK_DOWN: | 
|  | return "down"; | 
|  | case BOND_LINK_BACK: | 
|  | return "going back"; | 
|  | default: | 
|  | return "unknown"; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* if <dev> supports MII link status reporting, check its link status. | 
|  | * | 
|  | * We either do MII/ETHTOOL ioctls, or check netif_carrier_ok(), | 
|  | * depending upon the setting of the use_carrier parameter. | 
|  | * | 
|  | * Return either BMSR_LSTATUS, meaning that the link is up (or we | 
|  | * can't tell and just pretend it is), or 0, meaning that the link is | 
|  | * down. | 
|  | * | 
|  | * If reporting is non-zero, instead of faking link up, return -1 if | 
|  | * both ETHTOOL and MII ioctls fail (meaning the device does not | 
|  | * support them).  If use_carrier is set, return whatever it says. | 
|  | * It'd be nice if there was a good way to tell if a driver supports | 
|  | * netif_carrier, but there really isn't. | 
|  | */ | 
|  | static int bond_check_dev_link(struct bonding *bond, | 
|  | struct net_device *slave_dev, int reporting) | 
|  | { | 
|  | const struct net_device_ops *slave_ops = slave_dev->netdev_ops; | 
|  | int (*ioctl)(struct net_device *, struct ifreq *, int); | 
|  | struct ifreq ifr; | 
|  | struct mii_ioctl_data *mii; | 
|  |  | 
|  | if (!reporting && !netif_running(slave_dev)) | 
|  | return 0; | 
|  |  | 
|  | if (bond->params.use_carrier) | 
|  | return netif_carrier_ok(slave_dev) ? BMSR_LSTATUS : 0; | 
|  |  | 
|  | /* Try to get link status using Ethtool first. */ | 
|  | if (slave_dev->ethtool_ops->get_link) | 
|  | return slave_dev->ethtool_ops->get_link(slave_dev) ? | 
|  | BMSR_LSTATUS : 0; | 
|  |  | 
|  | /* Ethtool can't be used, fallback to MII ioctls. */ | 
|  | ioctl = slave_ops->ndo_eth_ioctl; | 
|  | if (ioctl) { | 
|  | /* TODO: set pointer to correct ioctl on a per team member | 
|  | *       bases to make this more efficient. that is, once | 
|  | *       we determine the correct ioctl, we will always | 
|  | *       call it and not the others for that team | 
|  | *       member. | 
|  | */ | 
|  |  | 
|  | /* We cannot assume that SIOCGMIIPHY will also read a | 
|  | * register; not all network drivers (e.g., e100) | 
|  | * support that. | 
|  | */ | 
|  |  | 
|  | /* Yes, the mii is overlaid on the ifreq.ifr_ifru */ | 
|  | strscpy_pad(ifr.ifr_name, slave_dev->name, IFNAMSIZ); | 
|  | mii = if_mii(&ifr); | 
|  | if (ioctl(slave_dev, &ifr, SIOCGMIIPHY) == 0) { | 
|  | mii->reg_num = MII_BMSR; | 
|  | if (ioctl(slave_dev, &ifr, SIOCGMIIREG) == 0) | 
|  | return mii->val_out & BMSR_LSTATUS; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* If reporting, report that either there's no ndo_eth_ioctl, | 
|  | * or both SIOCGMIIREG and get_link failed (meaning that we | 
|  | * cannot report link status).  If not reporting, pretend | 
|  | * we're ok. | 
|  | */ | 
|  | return reporting ? -1 : BMSR_LSTATUS; | 
|  | } | 
|  |  | 
|  | /*----------------------------- Multicast list ------------------------------*/ | 
|  |  | 
|  | /* Push the promiscuity flag down to appropriate slaves */ | 
|  | static int bond_set_promiscuity(struct bonding *bond, int inc) | 
|  | { | 
|  | struct list_head *iter; | 
|  | int err = 0; | 
|  |  | 
|  | if (bond_uses_primary(bond)) { | 
|  | struct slave *curr_active = rtnl_dereference(bond->curr_active_slave); | 
|  |  | 
|  | if (curr_active) | 
|  | err = dev_set_promiscuity(curr_active->dev, inc); | 
|  | } else { | 
|  | struct slave *slave; | 
|  |  | 
|  | bond_for_each_slave(bond, slave, iter) { | 
|  | err = dev_set_promiscuity(slave->dev, inc); | 
|  | if (err) | 
|  | return err; | 
|  | } | 
|  | } | 
|  | return err; | 
|  | } | 
|  |  | 
|  | /* Push the allmulti flag down to all slaves */ | 
|  | static int bond_set_allmulti(struct bonding *bond, int inc) | 
|  | { | 
|  | struct list_head *iter; | 
|  | int err = 0; | 
|  |  | 
|  | if (bond_uses_primary(bond)) { | 
|  | struct slave *curr_active = rtnl_dereference(bond->curr_active_slave); | 
|  |  | 
|  | if (curr_active) | 
|  | err = dev_set_allmulti(curr_active->dev, inc); | 
|  | } else { | 
|  | struct slave *slave; | 
|  |  | 
|  | bond_for_each_slave(bond, slave, iter) { | 
|  | err = dev_set_allmulti(slave->dev, inc); | 
|  | if (err) | 
|  | return err; | 
|  | } | 
|  | } | 
|  | return err; | 
|  | } | 
|  |  | 
|  | /* Retrieve the list of registered multicast addresses for the bonding | 
|  | * device and retransmit an IGMP JOIN request to the current active | 
|  | * slave. | 
|  | */ | 
|  | static void bond_resend_igmp_join_requests_delayed(struct work_struct *work) | 
|  | { | 
|  | struct bonding *bond = container_of(work, struct bonding, | 
|  | mcast_work.work); | 
|  |  | 
|  | if (!rtnl_trylock()) { | 
|  | queue_delayed_work(bond->wq, &bond->mcast_work, 1); | 
|  | return; | 
|  | } | 
|  | call_netdevice_notifiers(NETDEV_RESEND_IGMP, bond->dev); | 
|  |  | 
|  | if (bond->igmp_retrans > 1) { | 
|  | bond->igmp_retrans--; | 
|  | queue_delayed_work(bond->wq, &bond->mcast_work, HZ/5); | 
|  | } | 
|  | rtnl_unlock(); | 
|  | } | 
|  |  | 
|  | /* Flush bond's hardware addresses from slave */ | 
|  | static void bond_hw_addr_flush(struct net_device *bond_dev, | 
|  | struct net_device *slave_dev) | 
|  | { | 
|  | struct bonding *bond = netdev_priv(bond_dev); | 
|  |  | 
|  | dev_uc_unsync(slave_dev, bond_dev); | 
|  | dev_mc_unsync(slave_dev, bond_dev); | 
|  |  | 
|  | if (BOND_MODE(bond) == BOND_MODE_8023AD) | 
|  | dev_mc_del(slave_dev, lacpdu_mcast_addr); | 
|  | } | 
|  |  | 
|  | /*--------------------------- Active slave change ---------------------------*/ | 
|  |  | 
|  | /* Update the hardware address list and promisc/allmulti for the new and | 
|  | * old active slaves (if any).  Modes that are not using primary keep all | 
|  | * slaves up date at all times; only the modes that use primary need to call | 
|  | * this function to swap these settings during a failover. | 
|  | */ | 
|  | static void bond_hw_addr_swap(struct bonding *bond, struct slave *new_active, | 
|  | struct slave *old_active) | 
|  | { | 
|  | if (old_active) { | 
|  | if (bond->dev->flags & IFF_PROMISC) | 
|  | dev_set_promiscuity(old_active->dev, -1); | 
|  |  | 
|  | if (bond->dev->flags & IFF_ALLMULTI) | 
|  | dev_set_allmulti(old_active->dev, -1); | 
|  |  | 
|  | if (bond->dev->flags & IFF_UP) | 
|  | bond_hw_addr_flush(bond->dev, old_active->dev); | 
|  | } | 
|  |  | 
|  | if (new_active) { | 
|  | /* FIXME: Signal errors upstream. */ | 
|  | if (bond->dev->flags & IFF_PROMISC) | 
|  | dev_set_promiscuity(new_active->dev, 1); | 
|  |  | 
|  | if (bond->dev->flags & IFF_ALLMULTI) | 
|  | dev_set_allmulti(new_active->dev, 1); | 
|  |  | 
|  | if (bond->dev->flags & IFF_UP) { | 
|  | netif_addr_lock_bh(bond->dev); | 
|  | dev_uc_sync(new_active->dev, bond->dev); | 
|  | dev_mc_sync(new_active->dev, bond->dev); | 
|  | netif_addr_unlock_bh(bond->dev); | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | /** | 
|  | * bond_set_dev_addr - clone slave's address to bond | 
|  | * @bond_dev: bond net device | 
|  | * @slave_dev: slave net device | 
|  | * | 
|  | * Should be called with RTNL held. | 
|  | */ | 
|  | static int bond_set_dev_addr(struct net_device *bond_dev, | 
|  | struct net_device *slave_dev) | 
|  | { | 
|  | int err; | 
|  |  | 
|  | slave_dbg(bond_dev, slave_dev, "bond_dev=%p slave_dev=%p slave_dev->addr_len=%d\n", | 
|  | bond_dev, slave_dev, slave_dev->addr_len); | 
|  | err = dev_pre_changeaddr_notify(bond_dev, slave_dev->dev_addr, NULL); | 
|  | if (err) | 
|  | return err; | 
|  |  | 
|  | __dev_addr_set(bond_dev, slave_dev->dev_addr, slave_dev->addr_len); | 
|  | bond_dev->addr_assign_type = NET_ADDR_STOLEN; | 
|  | call_netdevice_notifiers(NETDEV_CHANGEADDR, bond_dev); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static struct slave *bond_get_old_active(struct bonding *bond, | 
|  | struct slave *new_active) | 
|  | { | 
|  | struct slave *slave; | 
|  | struct list_head *iter; | 
|  |  | 
|  | bond_for_each_slave(bond, slave, iter) { | 
|  | if (slave == new_active) | 
|  | continue; | 
|  |  | 
|  | if (ether_addr_equal(bond->dev->dev_addr, slave->dev->dev_addr)) | 
|  | return slave; | 
|  | } | 
|  |  | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | /* bond_do_fail_over_mac | 
|  | * | 
|  | * Perform special MAC address swapping for fail_over_mac settings | 
|  | * | 
|  | * Called with RTNL | 
|  | */ | 
|  | static void bond_do_fail_over_mac(struct bonding *bond, | 
|  | struct slave *new_active, | 
|  | struct slave *old_active) | 
|  | { | 
|  | u8 tmp_mac[MAX_ADDR_LEN]; | 
|  | struct sockaddr_storage ss; | 
|  | int rv; | 
|  |  | 
|  | switch (bond->params.fail_over_mac) { | 
|  | case BOND_FOM_ACTIVE: | 
|  | if (new_active) { | 
|  | rv = bond_set_dev_addr(bond->dev, new_active->dev); | 
|  | if (rv) | 
|  | slave_err(bond->dev, new_active->dev, "Error %d setting bond MAC from slave\n", | 
|  | -rv); | 
|  | } | 
|  | break; | 
|  | case BOND_FOM_FOLLOW: | 
|  | /* if new_active && old_active, swap them | 
|  | * if just old_active, do nothing (going to no active slave) | 
|  | * if just new_active, set new_active to bond's MAC | 
|  | */ | 
|  | if (!new_active) | 
|  | return; | 
|  |  | 
|  | if (!old_active) | 
|  | old_active = bond_get_old_active(bond, new_active); | 
|  |  | 
|  | if (old_active) { | 
|  | bond_hw_addr_copy(tmp_mac, new_active->dev->dev_addr, | 
|  | new_active->dev->addr_len); | 
|  | bond_hw_addr_copy(ss.__data, | 
|  | old_active->dev->dev_addr, | 
|  | old_active->dev->addr_len); | 
|  | ss.ss_family = new_active->dev->type; | 
|  | } else { | 
|  | bond_hw_addr_copy(ss.__data, bond->dev->dev_addr, | 
|  | bond->dev->addr_len); | 
|  | ss.ss_family = bond->dev->type; | 
|  | } | 
|  |  | 
|  | rv = dev_set_mac_address(new_active->dev, | 
|  | (struct sockaddr *)&ss, NULL); | 
|  | if (rv) { | 
|  | slave_err(bond->dev, new_active->dev, "Error %d setting MAC of new active slave\n", | 
|  | -rv); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | if (!old_active) | 
|  | goto out; | 
|  |  | 
|  | bond_hw_addr_copy(ss.__data, tmp_mac, | 
|  | new_active->dev->addr_len); | 
|  | ss.ss_family = old_active->dev->type; | 
|  |  | 
|  | rv = dev_set_mac_address(old_active->dev, | 
|  | (struct sockaddr *)&ss, NULL); | 
|  | if (rv) | 
|  | slave_err(bond->dev, old_active->dev, "Error %d setting MAC of old active slave\n", | 
|  | -rv); | 
|  | out: | 
|  | break; | 
|  | default: | 
|  | netdev_err(bond->dev, "bond_do_fail_over_mac impossible: bad policy %d\n", | 
|  | bond->params.fail_over_mac); | 
|  | break; | 
|  | } | 
|  |  | 
|  | } | 
|  |  | 
|  | /** | 
|  | * bond_choose_primary_or_current - select the primary or high priority slave | 
|  | * @bond: our bonding struct | 
|  | * | 
|  | * - Check if there is a primary link. If the primary link was set and is up, | 
|  | *   go on and do link reselection. | 
|  | * | 
|  | * - If primary link is not set or down, find the highest priority link. | 
|  | *   If the highest priority link is not current slave, set it as primary | 
|  | *   link and do link reselection. | 
|  | */ | 
|  | static struct slave *bond_choose_primary_or_current(struct bonding *bond) | 
|  | { | 
|  | struct slave *prim = rtnl_dereference(bond->primary_slave); | 
|  | struct slave *curr = rtnl_dereference(bond->curr_active_slave); | 
|  | struct slave *slave, *hprio = NULL; | 
|  | struct list_head *iter; | 
|  |  | 
|  | if (!prim || prim->link != BOND_LINK_UP) { | 
|  | bond_for_each_slave(bond, slave, iter) { | 
|  | if (slave->link == BOND_LINK_UP) { | 
|  | hprio = hprio ?: slave; | 
|  | if (slave->prio > hprio->prio) | 
|  | hprio = slave; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (hprio && hprio != curr) { | 
|  | prim = hprio; | 
|  | goto link_reselect; | 
|  | } | 
|  |  | 
|  | if (!curr || curr->link != BOND_LINK_UP) | 
|  | return NULL; | 
|  | return curr; | 
|  | } | 
|  |  | 
|  | if (bond->force_primary) { | 
|  | bond->force_primary = false; | 
|  | return prim; | 
|  | } | 
|  |  | 
|  | link_reselect: | 
|  | if (!curr || curr->link != BOND_LINK_UP) | 
|  | return prim; | 
|  |  | 
|  | /* At this point, prim and curr are both up */ | 
|  | switch (bond->params.primary_reselect) { | 
|  | case BOND_PRI_RESELECT_ALWAYS: | 
|  | return prim; | 
|  | case BOND_PRI_RESELECT_BETTER: | 
|  | if (prim->speed < curr->speed) | 
|  | return curr; | 
|  | if (prim->speed == curr->speed && prim->duplex <= curr->duplex) | 
|  | return curr; | 
|  | return prim; | 
|  | case BOND_PRI_RESELECT_FAILURE: | 
|  | return curr; | 
|  | default: | 
|  | netdev_err(bond->dev, "impossible primary_reselect %d\n", | 
|  | bond->params.primary_reselect); | 
|  | return curr; | 
|  | } | 
|  | } | 
|  |  | 
|  | /** | 
|  | * bond_find_best_slave - select the best available slave to be the active one | 
|  | * @bond: our bonding struct | 
|  | */ | 
|  | static struct slave *bond_find_best_slave(struct bonding *bond) | 
|  | { | 
|  | struct slave *slave, *bestslave = NULL; | 
|  | struct list_head *iter; | 
|  | int mintime = bond->params.updelay; | 
|  |  | 
|  | slave = bond_choose_primary_or_current(bond); | 
|  | if (slave) | 
|  | return slave; | 
|  |  | 
|  | bond_for_each_slave(bond, slave, iter) { | 
|  | if (slave->link == BOND_LINK_UP) | 
|  | return slave; | 
|  | if (slave->link == BOND_LINK_BACK && bond_slave_is_up(slave) && | 
|  | slave->delay < mintime) { | 
|  | mintime = slave->delay; | 
|  | bestslave = slave; | 
|  | } | 
|  | } | 
|  |  | 
|  | return bestslave; | 
|  | } | 
|  |  | 
|  | static bool bond_should_notify_peers(struct bonding *bond) | 
|  | { | 
|  | struct slave *slave; | 
|  |  | 
|  | rcu_read_lock(); | 
|  | slave = rcu_dereference(bond->curr_active_slave); | 
|  | rcu_read_unlock(); | 
|  |  | 
|  | if (!slave || !bond->send_peer_notif || | 
|  | bond->send_peer_notif % | 
|  | max(1, bond->params.peer_notif_delay) != 0 || | 
|  | !netif_carrier_ok(bond->dev) || | 
|  | test_bit(__LINK_STATE_LINKWATCH_PENDING, &slave->dev->state)) | 
|  | return false; | 
|  |  | 
|  | netdev_dbg(bond->dev, "bond_should_notify_peers: slave %s\n", | 
|  | slave ? slave->dev->name : "NULL"); | 
|  |  | 
|  | return true; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * bond_change_active_slave - change the active slave into the specified one | 
|  | * @bond: our bonding struct | 
|  | * @new_active: the new slave to make the active one | 
|  | * | 
|  | * Set the new slave to the bond's settings and unset them on the old | 
|  | * curr_active_slave. | 
|  | * Setting include flags, mc-list, promiscuity, allmulti, etc. | 
|  | * | 
|  | * If @new's link state is %BOND_LINK_BACK we'll set it to %BOND_LINK_UP, | 
|  | * because it is apparently the best available slave we have, even though its | 
|  | * updelay hasn't timed out yet. | 
|  | * | 
|  | * Caller must hold RTNL. | 
|  | */ | 
|  | void bond_change_active_slave(struct bonding *bond, struct slave *new_active) | 
|  | { | 
|  | struct slave *old_active; | 
|  |  | 
|  | ASSERT_RTNL(); | 
|  |  | 
|  | old_active = rtnl_dereference(bond->curr_active_slave); | 
|  |  | 
|  | if (old_active == new_active) | 
|  | return; | 
|  |  | 
|  | #ifdef CONFIG_XFRM_OFFLOAD | 
|  | bond_ipsec_del_sa_all(bond); | 
|  | #endif /* CONFIG_XFRM_OFFLOAD */ | 
|  |  | 
|  | if (new_active) { | 
|  | new_active->last_link_up = jiffies; | 
|  |  | 
|  | if (new_active->link == BOND_LINK_BACK) { | 
|  | if (bond_uses_primary(bond)) { | 
|  | slave_info(bond->dev, new_active->dev, "making interface the new active one %d ms earlier\n", | 
|  | (bond->params.updelay - new_active->delay) * bond->params.miimon); | 
|  | } | 
|  |  | 
|  | new_active->delay = 0; | 
|  | bond_set_slave_link_state(new_active, BOND_LINK_UP, | 
|  | BOND_SLAVE_NOTIFY_NOW); | 
|  |  | 
|  | if (BOND_MODE(bond) == BOND_MODE_8023AD) | 
|  | bond_3ad_handle_link_change(new_active, BOND_LINK_UP); | 
|  |  | 
|  | if (bond_is_lb(bond)) | 
|  | bond_alb_handle_link_change(bond, new_active, BOND_LINK_UP); | 
|  | } else { | 
|  | if (bond_uses_primary(bond)) | 
|  | slave_info(bond->dev, new_active->dev, "making interface the new active one\n"); | 
|  | } | 
|  | } | 
|  |  | 
|  | if (bond_uses_primary(bond)) | 
|  | bond_hw_addr_swap(bond, new_active, old_active); | 
|  |  | 
|  | if (bond_is_lb(bond)) { | 
|  | bond_alb_handle_active_change(bond, new_active); | 
|  | if (old_active) | 
|  | bond_set_slave_inactive_flags(old_active, | 
|  | BOND_SLAVE_NOTIFY_NOW); | 
|  | if (new_active) | 
|  | bond_set_slave_active_flags(new_active, | 
|  | BOND_SLAVE_NOTIFY_NOW); | 
|  | } else { | 
|  | rcu_assign_pointer(bond->curr_active_slave, new_active); | 
|  | } | 
|  |  | 
|  | if (BOND_MODE(bond) == BOND_MODE_ACTIVEBACKUP) { | 
|  | if (old_active) | 
|  | bond_set_slave_inactive_flags(old_active, | 
|  | BOND_SLAVE_NOTIFY_NOW); | 
|  |  | 
|  | if (new_active) { | 
|  | bool should_notify_peers = false; | 
|  |  | 
|  | bond_set_slave_active_flags(new_active, | 
|  | BOND_SLAVE_NOTIFY_NOW); | 
|  |  | 
|  | if (bond->params.fail_over_mac) | 
|  | bond_do_fail_over_mac(bond, new_active, | 
|  | old_active); | 
|  |  | 
|  | if (netif_running(bond->dev)) { | 
|  | bond->send_peer_notif = | 
|  | bond->params.num_peer_notif * | 
|  | max(1, bond->params.peer_notif_delay); | 
|  | should_notify_peers = | 
|  | bond_should_notify_peers(bond); | 
|  | } | 
|  |  | 
|  | call_netdevice_notifiers(NETDEV_BONDING_FAILOVER, bond->dev); | 
|  | if (should_notify_peers) { | 
|  | bond->send_peer_notif--; | 
|  | call_netdevice_notifiers(NETDEV_NOTIFY_PEERS, | 
|  | bond->dev); | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_XFRM_OFFLOAD | 
|  | bond_ipsec_add_sa_all(bond); | 
|  | #endif /* CONFIG_XFRM_OFFLOAD */ | 
|  |  | 
|  | /* resend IGMP joins since active slave has changed or | 
|  | * all were sent on curr_active_slave. | 
|  | * resend only if bond is brought up with the affected | 
|  | * bonding modes and the retransmission is enabled | 
|  | */ | 
|  | if (netif_running(bond->dev) && (bond->params.resend_igmp > 0) && | 
|  | ((bond_uses_primary(bond) && new_active) || | 
|  | BOND_MODE(bond) == BOND_MODE_ROUNDROBIN)) { | 
|  | bond->igmp_retrans = bond->params.resend_igmp; | 
|  | queue_delayed_work(bond->wq, &bond->mcast_work, 1); | 
|  | } | 
|  | } | 
|  |  | 
|  | /** | 
|  | * bond_select_active_slave - select a new active slave, if needed | 
|  | * @bond: our bonding struct | 
|  | * | 
|  | * This functions should be called when one of the following occurs: | 
|  | * - The old curr_active_slave has been released or lost its link. | 
|  | * - The primary_slave has got its link back. | 
|  | * - A slave has got its link back and there's no old curr_active_slave. | 
|  | * | 
|  | * Caller must hold RTNL. | 
|  | */ | 
|  | void bond_select_active_slave(struct bonding *bond) | 
|  | { | 
|  | struct slave *best_slave; | 
|  | int rv; | 
|  |  | 
|  | ASSERT_RTNL(); | 
|  |  | 
|  | best_slave = bond_find_best_slave(bond); | 
|  | if (best_slave != rtnl_dereference(bond->curr_active_slave)) { | 
|  | bond_change_active_slave(bond, best_slave); | 
|  | rv = bond_set_carrier(bond); | 
|  | if (!rv) | 
|  | return; | 
|  |  | 
|  | if (netif_carrier_ok(bond->dev)) | 
|  | netdev_info(bond->dev, "active interface up!\n"); | 
|  | else | 
|  | netdev_info(bond->dev, "now running without any active interface!\n"); | 
|  | } | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_NET_POLL_CONTROLLER | 
|  | static inline int slave_enable_netpoll(struct slave *slave) | 
|  | { | 
|  | struct netpoll *np; | 
|  | int err = 0; | 
|  |  | 
|  | np = kzalloc(sizeof(*np), GFP_KERNEL); | 
|  | err = -ENOMEM; | 
|  | if (!np) | 
|  | goto out; | 
|  |  | 
|  | err = __netpoll_setup(np, slave->dev); | 
|  | if (err) { | 
|  | kfree(np); | 
|  | goto out; | 
|  | } | 
|  | slave->np = np; | 
|  | out: | 
|  | return err; | 
|  | } | 
|  | static inline void slave_disable_netpoll(struct slave *slave) | 
|  | { | 
|  | struct netpoll *np = slave->np; | 
|  |  | 
|  | if (!np) | 
|  | return; | 
|  |  | 
|  | slave->np = NULL; | 
|  |  | 
|  | __netpoll_free(np); | 
|  | } | 
|  |  | 
|  | static void bond_poll_controller(struct net_device *bond_dev) | 
|  | { | 
|  | struct bonding *bond = netdev_priv(bond_dev); | 
|  | struct slave *slave = NULL; | 
|  | struct list_head *iter; | 
|  | struct ad_info ad_info; | 
|  |  | 
|  | if (BOND_MODE(bond) == BOND_MODE_8023AD) | 
|  | if (bond_3ad_get_active_agg_info(bond, &ad_info)) | 
|  | return; | 
|  |  | 
|  | bond_for_each_slave_rcu(bond, slave, iter) { | 
|  | if (!bond_slave_is_up(slave)) | 
|  | continue; | 
|  |  | 
|  | if (BOND_MODE(bond) == BOND_MODE_8023AD) { | 
|  | struct aggregator *agg = | 
|  | SLAVE_AD_INFO(slave)->port.aggregator; | 
|  |  | 
|  | if (agg && | 
|  | agg->aggregator_identifier != ad_info.aggregator_id) | 
|  | continue; | 
|  | } | 
|  |  | 
|  | netpoll_poll_dev(slave->dev); | 
|  | } | 
|  | } | 
|  |  | 
|  | static void bond_netpoll_cleanup(struct net_device *bond_dev) | 
|  | { | 
|  | struct bonding *bond = netdev_priv(bond_dev); | 
|  | struct list_head *iter; | 
|  | struct slave *slave; | 
|  |  | 
|  | bond_for_each_slave(bond, slave, iter) | 
|  | if (bond_slave_is_up(slave)) | 
|  | slave_disable_netpoll(slave); | 
|  | } | 
|  |  | 
|  | static int bond_netpoll_setup(struct net_device *dev, struct netpoll_info *ni) | 
|  | { | 
|  | struct bonding *bond = netdev_priv(dev); | 
|  | struct list_head *iter; | 
|  | struct slave *slave; | 
|  | int err = 0; | 
|  |  | 
|  | bond_for_each_slave(bond, slave, iter) { | 
|  | err = slave_enable_netpoll(slave); | 
|  | if (err) { | 
|  | bond_netpoll_cleanup(dev); | 
|  | break; | 
|  | } | 
|  | } | 
|  | return err; | 
|  | } | 
|  | #else | 
|  | static inline int slave_enable_netpoll(struct slave *slave) | 
|  | { | 
|  | return 0; | 
|  | } | 
|  | static inline void slave_disable_netpoll(struct slave *slave) | 
|  | { | 
|  | } | 
|  | static void bond_netpoll_cleanup(struct net_device *bond_dev) | 
|  | { | 
|  | } | 
|  | #endif | 
|  |  | 
|  | /*---------------------------------- IOCTL ----------------------------------*/ | 
|  |  | 
|  | static netdev_features_t bond_fix_features(struct net_device *dev, | 
|  | netdev_features_t features) | 
|  | { | 
|  | struct bonding *bond = netdev_priv(dev); | 
|  | struct list_head *iter; | 
|  | netdev_features_t mask; | 
|  | struct slave *slave; | 
|  |  | 
|  | mask = features; | 
|  |  | 
|  | features &= ~NETIF_F_ONE_FOR_ALL; | 
|  | features |= NETIF_F_ALL_FOR_ALL; | 
|  |  | 
|  | bond_for_each_slave(bond, slave, iter) { | 
|  | features = netdev_increment_features(features, | 
|  | slave->dev->features, | 
|  | mask); | 
|  | } | 
|  | features = netdev_add_tso_features(features, mask); | 
|  |  | 
|  | return features; | 
|  | } | 
|  |  | 
|  | #define BOND_VLAN_FEATURES	(NETIF_F_HW_CSUM | NETIF_F_SG | \ | 
|  | NETIF_F_FRAGLIST | NETIF_F_GSO_SOFTWARE | \ | 
|  | NETIF_F_HIGHDMA | NETIF_F_LRO) | 
|  |  | 
|  | #define BOND_ENC_FEATURES	(NETIF_F_HW_CSUM | NETIF_F_SG | \ | 
|  | NETIF_F_RXCSUM | NETIF_F_GSO_SOFTWARE) | 
|  |  | 
|  | #define BOND_MPLS_FEATURES	(NETIF_F_HW_CSUM | NETIF_F_SG | \ | 
|  | NETIF_F_GSO_SOFTWARE) | 
|  |  | 
|  |  | 
|  | static void bond_compute_features(struct bonding *bond) | 
|  | { | 
|  | unsigned int dst_release_flag = IFF_XMIT_DST_RELEASE | | 
|  | IFF_XMIT_DST_RELEASE_PERM; | 
|  | netdev_features_t vlan_features = BOND_VLAN_FEATURES; | 
|  | netdev_features_t enc_features  = BOND_ENC_FEATURES; | 
|  | #ifdef CONFIG_XFRM_OFFLOAD | 
|  | netdev_features_t xfrm_features  = BOND_XFRM_FEATURES; | 
|  | #endif /* CONFIG_XFRM_OFFLOAD */ | 
|  | netdev_features_t mpls_features  = BOND_MPLS_FEATURES; | 
|  | struct net_device *bond_dev = bond->dev; | 
|  | struct list_head *iter; | 
|  | struct slave *slave; | 
|  | unsigned short max_hard_header_len = ETH_HLEN; | 
|  | unsigned int tso_max_size = TSO_MAX_SIZE; | 
|  | u16 tso_max_segs = TSO_MAX_SEGS; | 
|  |  | 
|  | if (!bond_has_slaves(bond)) | 
|  | goto done; | 
|  | vlan_features &= NETIF_F_ALL_FOR_ALL; | 
|  | mpls_features &= NETIF_F_ALL_FOR_ALL; | 
|  |  | 
|  | bond_for_each_slave(bond, slave, iter) { | 
|  | vlan_features = netdev_increment_features(vlan_features, | 
|  | slave->dev->vlan_features, BOND_VLAN_FEATURES); | 
|  |  | 
|  | enc_features = netdev_increment_features(enc_features, | 
|  | slave->dev->hw_enc_features, | 
|  | BOND_ENC_FEATURES); | 
|  |  | 
|  | #ifdef CONFIG_XFRM_OFFLOAD | 
|  | xfrm_features = netdev_increment_features(xfrm_features, | 
|  | slave->dev->hw_enc_features, | 
|  | BOND_XFRM_FEATURES); | 
|  | #endif /* CONFIG_XFRM_OFFLOAD */ | 
|  |  | 
|  | mpls_features = netdev_increment_features(mpls_features, | 
|  | slave->dev->mpls_features, | 
|  | BOND_MPLS_FEATURES); | 
|  |  | 
|  | dst_release_flag &= slave->dev->priv_flags; | 
|  | if (slave->dev->hard_header_len > max_hard_header_len) | 
|  | max_hard_header_len = slave->dev->hard_header_len; | 
|  |  | 
|  | tso_max_size = min(tso_max_size, slave->dev->tso_max_size); | 
|  | tso_max_segs = min(tso_max_segs, slave->dev->tso_max_segs); | 
|  | } | 
|  | bond_dev->hard_header_len = max_hard_header_len; | 
|  |  | 
|  | done: | 
|  | bond_dev->vlan_features = vlan_features; | 
|  | bond_dev->hw_enc_features = enc_features | NETIF_F_GSO_ENCAP_ALL | | 
|  | NETIF_F_HW_VLAN_CTAG_TX | | 
|  | NETIF_F_HW_VLAN_STAG_TX; | 
|  | #ifdef CONFIG_XFRM_OFFLOAD | 
|  | bond_dev->hw_enc_features |= xfrm_features; | 
|  | #endif /* CONFIG_XFRM_OFFLOAD */ | 
|  | bond_dev->mpls_features = mpls_features; | 
|  | netif_set_tso_max_segs(bond_dev, tso_max_segs); | 
|  | netif_set_tso_max_size(bond_dev, tso_max_size); | 
|  |  | 
|  | bond_dev->priv_flags &= ~IFF_XMIT_DST_RELEASE; | 
|  | if ((bond_dev->priv_flags & IFF_XMIT_DST_RELEASE_PERM) && | 
|  | dst_release_flag == (IFF_XMIT_DST_RELEASE | IFF_XMIT_DST_RELEASE_PERM)) | 
|  | bond_dev->priv_flags |= IFF_XMIT_DST_RELEASE; | 
|  |  | 
|  | netdev_change_features(bond_dev); | 
|  | } | 
|  |  | 
|  | static void bond_setup_by_slave(struct net_device *bond_dev, | 
|  | struct net_device *slave_dev) | 
|  | { | 
|  | bool was_up = !!(bond_dev->flags & IFF_UP); | 
|  |  | 
|  | dev_close(bond_dev); | 
|  |  | 
|  | bond_dev->header_ops	    = slave_dev->header_ops; | 
|  |  | 
|  | bond_dev->type		    = slave_dev->type; | 
|  | bond_dev->hard_header_len   = slave_dev->hard_header_len; | 
|  | bond_dev->needed_headroom   = slave_dev->needed_headroom; | 
|  | bond_dev->addr_len	    = slave_dev->addr_len; | 
|  |  | 
|  | memcpy(bond_dev->broadcast, slave_dev->broadcast, | 
|  | slave_dev->addr_len); | 
|  |  | 
|  | if (slave_dev->flags & IFF_POINTOPOINT) { | 
|  | bond_dev->flags &= ~(IFF_BROADCAST | IFF_MULTICAST); | 
|  | bond_dev->flags |= (IFF_POINTOPOINT | IFF_NOARP); | 
|  | } | 
|  | if (was_up) | 
|  | dev_open(bond_dev, NULL); | 
|  | } | 
|  |  | 
|  | /* On bonding slaves other than the currently active slave, suppress | 
|  | * duplicates except for alb non-mcast/bcast. | 
|  | */ | 
|  | static bool bond_should_deliver_exact_match(struct sk_buff *skb, | 
|  | struct slave *slave, | 
|  | struct bonding *bond) | 
|  | { | 
|  | if (bond_is_slave_inactive(slave)) { | 
|  | if (BOND_MODE(bond) == BOND_MODE_ALB && | 
|  | skb->pkt_type != PACKET_BROADCAST && | 
|  | skb->pkt_type != PACKET_MULTICAST) | 
|  | return false; | 
|  | return true; | 
|  | } | 
|  | return false; | 
|  | } | 
|  |  | 
|  | static rx_handler_result_t bond_handle_frame(struct sk_buff **pskb) | 
|  | { | 
|  | struct sk_buff *skb = *pskb; | 
|  | struct slave *slave; | 
|  | struct bonding *bond; | 
|  | int (*recv_probe)(const struct sk_buff *, struct bonding *, | 
|  | struct slave *); | 
|  | int ret = RX_HANDLER_ANOTHER; | 
|  |  | 
|  | skb = skb_share_check(skb, GFP_ATOMIC); | 
|  | if (unlikely(!skb)) | 
|  | return RX_HANDLER_CONSUMED; | 
|  |  | 
|  | *pskb = skb; | 
|  |  | 
|  | slave = bond_slave_get_rcu(skb->dev); | 
|  | bond = slave->bond; | 
|  |  | 
|  | recv_probe = READ_ONCE(bond->recv_probe); | 
|  | if (recv_probe) { | 
|  | ret = recv_probe(skb, bond, slave); | 
|  | if (ret == RX_HANDLER_CONSUMED) { | 
|  | consume_skb(skb); | 
|  | return ret; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | * For packets determined by bond_should_deliver_exact_match() call to | 
|  | * be suppressed we want to make an exception for link-local packets. | 
|  | * This is necessary for e.g. LLDP daemons to be able to monitor | 
|  | * inactive slave links without being forced to bind to them | 
|  | * explicitly. | 
|  | * | 
|  | * At the same time, packets that are passed to the bonding master | 
|  | * (including link-local ones) can have their originating interface | 
|  | * determined via PACKET_ORIGDEV socket option. | 
|  | */ | 
|  | if (bond_should_deliver_exact_match(skb, slave, bond)) { | 
|  | if (is_link_local_ether_addr(eth_hdr(skb)->h_dest)) | 
|  | return RX_HANDLER_PASS; | 
|  | return RX_HANDLER_EXACT; | 
|  | } | 
|  |  | 
|  | skb->dev = bond->dev; | 
|  |  | 
|  | if (BOND_MODE(bond) == BOND_MODE_ALB && | 
|  | netif_is_bridge_port(bond->dev) && | 
|  | skb->pkt_type == PACKET_HOST) { | 
|  |  | 
|  | if (unlikely(skb_cow_head(skb, | 
|  | skb->data - skb_mac_header(skb)))) { | 
|  | kfree_skb(skb); | 
|  | return RX_HANDLER_CONSUMED; | 
|  | } | 
|  | bond_hw_addr_copy(eth_hdr(skb)->h_dest, bond->dev->dev_addr, | 
|  | bond->dev->addr_len); | 
|  | } | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static enum netdev_lag_tx_type bond_lag_tx_type(struct bonding *bond) | 
|  | { | 
|  | switch (BOND_MODE(bond)) { | 
|  | case BOND_MODE_ROUNDROBIN: | 
|  | return NETDEV_LAG_TX_TYPE_ROUNDROBIN; | 
|  | case BOND_MODE_ACTIVEBACKUP: | 
|  | return NETDEV_LAG_TX_TYPE_ACTIVEBACKUP; | 
|  | case BOND_MODE_BROADCAST: | 
|  | return NETDEV_LAG_TX_TYPE_BROADCAST; | 
|  | case BOND_MODE_XOR: | 
|  | case BOND_MODE_8023AD: | 
|  | return NETDEV_LAG_TX_TYPE_HASH; | 
|  | default: | 
|  | return NETDEV_LAG_TX_TYPE_UNKNOWN; | 
|  | } | 
|  | } | 
|  |  | 
|  | static enum netdev_lag_hash bond_lag_hash_type(struct bonding *bond, | 
|  | enum netdev_lag_tx_type type) | 
|  | { | 
|  | if (type != NETDEV_LAG_TX_TYPE_HASH) | 
|  | return NETDEV_LAG_HASH_NONE; | 
|  |  | 
|  | switch (bond->params.xmit_policy) { | 
|  | case BOND_XMIT_POLICY_LAYER2: | 
|  | return NETDEV_LAG_HASH_L2; | 
|  | case BOND_XMIT_POLICY_LAYER34: | 
|  | return NETDEV_LAG_HASH_L34; | 
|  | case BOND_XMIT_POLICY_LAYER23: | 
|  | return NETDEV_LAG_HASH_L23; | 
|  | case BOND_XMIT_POLICY_ENCAP23: | 
|  | return NETDEV_LAG_HASH_E23; | 
|  | case BOND_XMIT_POLICY_ENCAP34: | 
|  | return NETDEV_LAG_HASH_E34; | 
|  | case BOND_XMIT_POLICY_VLAN_SRCMAC: | 
|  | return NETDEV_LAG_HASH_VLAN_SRCMAC; | 
|  | default: | 
|  | return NETDEV_LAG_HASH_UNKNOWN; | 
|  | } | 
|  | } | 
|  |  | 
|  | static int bond_master_upper_dev_link(struct bonding *bond, struct slave *slave, | 
|  | struct netlink_ext_ack *extack) | 
|  | { | 
|  | struct netdev_lag_upper_info lag_upper_info; | 
|  | enum netdev_lag_tx_type type; | 
|  | int err; | 
|  |  | 
|  | type = bond_lag_tx_type(bond); | 
|  | lag_upper_info.tx_type = type; | 
|  | lag_upper_info.hash_type = bond_lag_hash_type(bond, type); | 
|  |  | 
|  | err = netdev_master_upper_dev_link(slave->dev, bond->dev, slave, | 
|  | &lag_upper_info, extack); | 
|  | if (err) | 
|  | return err; | 
|  |  | 
|  | slave->dev->flags |= IFF_SLAVE; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void bond_upper_dev_unlink(struct bonding *bond, struct slave *slave) | 
|  | { | 
|  | netdev_upper_dev_unlink(slave->dev, bond->dev); | 
|  | slave->dev->flags &= ~IFF_SLAVE; | 
|  | } | 
|  |  | 
|  | static void slave_kobj_release(struct kobject *kobj) | 
|  | { | 
|  | struct slave *slave = to_slave(kobj); | 
|  | struct bonding *bond = bond_get_bond_by_slave(slave); | 
|  |  | 
|  | cancel_delayed_work_sync(&slave->notify_work); | 
|  | if (BOND_MODE(bond) == BOND_MODE_8023AD) | 
|  | kfree(SLAVE_AD_INFO(slave)); | 
|  |  | 
|  | kfree(slave); | 
|  | } | 
|  |  | 
|  | static struct kobj_type slave_ktype = { | 
|  | .release = slave_kobj_release, | 
|  | #ifdef CONFIG_SYSFS | 
|  | .sysfs_ops = &slave_sysfs_ops, | 
|  | #endif | 
|  | }; | 
|  |  | 
|  | static int bond_kobj_init(struct slave *slave) | 
|  | { | 
|  | int err; | 
|  |  | 
|  | err = kobject_init_and_add(&slave->kobj, &slave_ktype, | 
|  | &(slave->dev->dev.kobj), "bonding_slave"); | 
|  | if (err) | 
|  | kobject_put(&slave->kobj); | 
|  |  | 
|  | return err; | 
|  | } | 
|  |  | 
|  | static struct slave *bond_alloc_slave(struct bonding *bond, | 
|  | struct net_device *slave_dev) | 
|  | { | 
|  | struct slave *slave = NULL; | 
|  |  | 
|  | slave = kzalloc(sizeof(*slave), GFP_KERNEL); | 
|  | if (!slave) | 
|  | return NULL; | 
|  |  | 
|  | slave->bond = bond; | 
|  | slave->dev = slave_dev; | 
|  | INIT_DELAYED_WORK(&slave->notify_work, bond_netdev_notify_work); | 
|  |  | 
|  | if (bond_kobj_init(slave)) | 
|  | return NULL; | 
|  |  | 
|  | if (BOND_MODE(bond) == BOND_MODE_8023AD) { | 
|  | SLAVE_AD_INFO(slave) = kzalloc(sizeof(struct ad_slave_info), | 
|  | GFP_KERNEL); | 
|  | if (!SLAVE_AD_INFO(slave)) { | 
|  | kobject_put(&slave->kobj); | 
|  | return NULL; | 
|  | } | 
|  | } | 
|  |  | 
|  | return slave; | 
|  | } | 
|  |  | 
|  | static void bond_fill_ifbond(struct bonding *bond, struct ifbond *info) | 
|  | { | 
|  | info->bond_mode = BOND_MODE(bond); | 
|  | info->miimon = bond->params.miimon; | 
|  | info->num_slaves = bond->slave_cnt; | 
|  | } | 
|  |  | 
|  | static void bond_fill_ifslave(struct slave *slave, struct ifslave *info) | 
|  | { | 
|  | strcpy(info->slave_name, slave->dev->name); | 
|  | info->link = slave->link; | 
|  | info->state = bond_slave_state(slave); | 
|  | info->link_failure_count = slave->link_failure_count; | 
|  | } | 
|  |  | 
|  | static void bond_netdev_notify_work(struct work_struct *_work) | 
|  | { | 
|  | struct slave *slave = container_of(_work, struct slave, | 
|  | notify_work.work); | 
|  |  | 
|  | if (rtnl_trylock()) { | 
|  | struct netdev_bonding_info binfo; | 
|  |  | 
|  | bond_fill_ifslave(slave, &binfo.slave); | 
|  | bond_fill_ifbond(slave->bond, &binfo.master); | 
|  | netdev_bonding_info_change(slave->dev, &binfo); | 
|  | rtnl_unlock(); | 
|  | } else { | 
|  | queue_delayed_work(slave->bond->wq, &slave->notify_work, 1); | 
|  | } | 
|  | } | 
|  |  | 
|  | void bond_queue_slave_event(struct slave *slave) | 
|  | { | 
|  | queue_delayed_work(slave->bond->wq, &slave->notify_work, 0); | 
|  | } | 
|  |  | 
|  | void bond_lower_state_changed(struct slave *slave) | 
|  | { | 
|  | struct netdev_lag_lower_state_info info; | 
|  |  | 
|  | info.link_up = slave->link == BOND_LINK_UP || | 
|  | slave->link == BOND_LINK_FAIL; | 
|  | info.tx_enabled = bond_is_active_slave(slave); | 
|  | netdev_lower_state_changed(slave->dev, &info); | 
|  | } | 
|  |  | 
|  | #define BOND_NL_ERR(bond_dev, extack, errmsg) do {		\ | 
|  | if (extack)						\ | 
|  | NL_SET_ERR_MSG(extack, errmsg);			\ | 
|  | else							\ | 
|  | netdev_err(bond_dev, "Error: %s\n", errmsg);	\ | 
|  | } while (0) | 
|  |  | 
|  | #define SLAVE_NL_ERR(bond_dev, slave_dev, extack, errmsg) do {		\ | 
|  | if (extack)							\ | 
|  | NL_SET_ERR_MSG(extack, errmsg);				\ | 
|  | else								\ | 
|  | slave_err(bond_dev, slave_dev, "Error: %s\n", errmsg);	\ | 
|  | } while (0) | 
|  |  | 
|  | /* The bonding driver uses ether_setup() to convert a master bond device | 
|  | * to ARPHRD_ETHER, that resets the target netdevice's flags so we always | 
|  | * have to restore the IFF_MASTER flag, and only restore IFF_SLAVE and IFF_UP | 
|  | * if they were set | 
|  | */ | 
|  | static void bond_ether_setup(struct net_device *bond_dev) | 
|  | { | 
|  | unsigned int flags = bond_dev->flags & (IFF_SLAVE | IFF_UP); | 
|  |  | 
|  | ether_setup(bond_dev); | 
|  | bond_dev->flags |= IFF_MASTER | flags; | 
|  | bond_dev->priv_flags &= ~IFF_TX_SKB_SHARING; | 
|  | } | 
|  |  | 
|  | void bond_xdp_set_features(struct net_device *bond_dev) | 
|  | { | 
|  | struct bonding *bond = netdev_priv(bond_dev); | 
|  | xdp_features_t val = NETDEV_XDP_ACT_MASK; | 
|  | struct list_head *iter; | 
|  | struct slave *slave; | 
|  |  | 
|  | ASSERT_RTNL(); | 
|  |  | 
|  | if (!bond_xdp_check(bond)) { | 
|  | xdp_clear_features_flag(bond_dev); | 
|  | return; | 
|  | } | 
|  |  | 
|  | bond_for_each_slave(bond, slave, iter) | 
|  | val &= slave->dev->xdp_features; | 
|  |  | 
|  | val &= ~NETDEV_XDP_ACT_XSK_ZEROCOPY; | 
|  |  | 
|  | xdp_set_features_flag(bond_dev, val); | 
|  | } | 
|  |  | 
|  | /* enslave device <slave> to bond device <master> */ | 
|  | int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev, | 
|  | struct netlink_ext_ack *extack) | 
|  | { | 
|  | struct bonding *bond = netdev_priv(bond_dev); | 
|  | const struct net_device_ops *slave_ops = slave_dev->netdev_ops; | 
|  | struct slave *new_slave = NULL, *prev_slave; | 
|  | struct sockaddr_storage ss; | 
|  | int link_reporting; | 
|  | int res = 0, i; | 
|  |  | 
|  | if (slave_dev->flags & IFF_MASTER && | 
|  | !netif_is_bond_master(slave_dev)) { | 
|  | BOND_NL_ERR(bond_dev, extack, | 
|  | "Device type (master device) cannot be enslaved"); | 
|  | return -EPERM; | 
|  | } | 
|  |  | 
|  | if (!bond->params.use_carrier && | 
|  | slave_dev->ethtool_ops->get_link == NULL && | 
|  | slave_ops->ndo_eth_ioctl == NULL) { | 
|  | slave_warn(bond_dev, slave_dev, "no link monitoring support\n"); | 
|  | } | 
|  |  | 
|  | /* already in-use? */ | 
|  | if (netdev_is_rx_handler_busy(slave_dev)) { | 
|  | SLAVE_NL_ERR(bond_dev, slave_dev, extack, | 
|  | "Device is in use and cannot be enslaved"); | 
|  | return -EBUSY; | 
|  | } | 
|  |  | 
|  | if (bond_dev == slave_dev) { | 
|  | BOND_NL_ERR(bond_dev, extack, "Cannot enslave bond to itself."); | 
|  | return -EPERM; | 
|  | } | 
|  |  | 
|  | /* vlan challenged mutual exclusion */ | 
|  | /* no need to lock since we're protected by rtnl_lock */ | 
|  | if (slave_dev->features & NETIF_F_VLAN_CHALLENGED) { | 
|  | slave_dbg(bond_dev, slave_dev, "is NETIF_F_VLAN_CHALLENGED\n"); | 
|  | if (vlan_uses_dev(bond_dev)) { | 
|  | SLAVE_NL_ERR(bond_dev, slave_dev, extack, | 
|  | "Can not enslave VLAN challenged device to VLAN enabled bond"); | 
|  | return -EPERM; | 
|  | } else { | 
|  | slave_warn(bond_dev, slave_dev, "enslaved VLAN challenged slave. Adding VLANs will be blocked as long as it is part of bond.\n"); | 
|  | } | 
|  | } else { | 
|  | slave_dbg(bond_dev, slave_dev, "is !NETIF_F_VLAN_CHALLENGED\n"); | 
|  | } | 
|  |  | 
|  | if (slave_dev->features & NETIF_F_HW_ESP) | 
|  | slave_dbg(bond_dev, slave_dev, "is esp-hw-offload capable\n"); | 
|  |  | 
|  | /* Old ifenslave binaries are no longer supported.  These can | 
|  | * be identified with moderate accuracy by the state of the slave: | 
|  | * the current ifenslave will set the interface down prior to | 
|  | * enslaving it; the old ifenslave will not. | 
|  | */ | 
|  | if (slave_dev->flags & IFF_UP) { | 
|  | SLAVE_NL_ERR(bond_dev, slave_dev, extack, | 
|  | "Device can not be enslaved while up"); | 
|  | return -EPERM; | 
|  | } | 
|  |  | 
|  | /* set bonding device ether type by slave - bonding netdevices are | 
|  | * created with ether_setup, so when the slave type is not ARPHRD_ETHER | 
|  | * there is a need to override some of the type dependent attribs/funcs. | 
|  | * | 
|  | * bond ether type mutual exclusion - don't allow slaves of dissimilar | 
|  | * ether type (eg ARPHRD_ETHER and ARPHRD_INFINIBAND) share the same bond | 
|  | */ | 
|  | if (!bond_has_slaves(bond)) { | 
|  | if (bond_dev->type != slave_dev->type) { | 
|  | slave_dbg(bond_dev, slave_dev, "change device type from %d to %d\n", | 
|  | bond_dev->type, slave_dev->type); | 
|  |  | 
|  | res = call_netdevice_notifiers(NETDEV_PRE_TYPE_CHANGE, | 
|  | bond_dev); | 
|  | res = notifier_to_errno(res); | 
|  | if (res) { | 
|  | slave_err(bond_dev, slave_dev, "refused to change device type\n"); | 
|  | return -EBUSY; | 
|  | } | 
|  |  | 
|  | /* Flush unicast and multicast addresses */ | 
|  | dev_uc_flush(bond_dev); | 
|  | dev_mc_flush(bond_dev); | 
|  |  | 
|  | if (slave_dev->type != ARPHRD_ETHER) | 
|  | bond_setup_by_slave(bond_dev, slave_dev); | 
|  | else | 
|  | bond_ether_setup(bond_dev); | 
|  |  | 
|  | call_netdevice_notifiers(NETDEV_POST_TYPE_CHANGE, | 
|  | bond_dev); | 
|  | } | 
|  | } else if (bond_dev->type != slave_dev->type) { | 
|  | SLAVE_NL_ERR(bond_dev, slave_dev, extack, | 
|  | "Device type is different from other slaves"); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | if (slave_dev->type == ARPHRD_INFINIBAND && | 
|  | BOND_MODE(bond) != BOND_MODE_ACTIVEBACKUP) { | 
|  | SLAVE_NL_ERR(bond_dev, slave_dev, extack, | 
|  | "Only active-backup mode is supported for infiniband slaves"); | 
|  | res = -EOPNOTSUPP; | 
|  | goto err_undo_flags; | 
|  | } | 
|  |  | 
|  | if (!slave_ops->ndo_set_mac_address || | 
|  | slave_dev->type == ARPHRD_INFINIBAND) { | 
|  | slave_warn(bond_dev, slave_dev, "The slave device specified does not support setting the MAC address\n"); | 
|  | if (BOND_MODE(bond) == BOND_MODE_ACTIVEBACKUP && | 
|  | bond->params.fail_over_mac != BOND_FOM_ACTIVE) { | 
|  | if (!bond_has_slaves(bond)) { | 
|  | bond->params.fail_over_mac = BOND_FOM_ACTIVE; | 
|  | slave_warn(bond_dev, slave_dev, "Setting fail_over_mac to active for active-backup mode\n"); | 
|  | } else { | 
|  | SLAVE_NL_ERR(bond_dev, slave_dev, extack, | 
|  | "Slave device does not support setting the MAC address, but fail_over_mac is not set to active"); | 
|  | res = -EOPNOTSUPP; | 
|  | goto err_undo_flags; | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | call_netdevice_notifiers(NETDEV_JOIN, slave_dev); | 
|  |  | 
|  | /* If this is the first slave, then we need to set the master's hardware | 
|  | * address to be the same as the slave's. | 
|  | */ | 
|  | if (!bond_has_slaves(bond) && | 
|  | bond->dev->addr_assign_type == NET_ADDR_RANDOM) { | 
|  | res = bond_set_dev_addr(bond->dev, slave_dev); | 
|  | if (res) | 
|  | goto err_undo_flags; | 
|  | } | 
|  |  | 
|  | new_slave = bond_alloc_slave(bond, slave_dev); | 
|  | if (!new_slave) { | 
|  | res = -ENOMEM; | 
|  | goto err_undo_flags; | 
|  | } | 
|  |  | 
|  | /* Set the new_slave's queue_id to be zero.  Queue ID mapping | 
|  | * is set via sysfs or module option if desired. | 
|  | */ | 
|  | new_slave->queue_id = 0; | 
|  |  | 
|  | /* Save slave's original mtu and then set it to match the bond */ | 
|  | new_slave->original_mtu = slave_dev->mtu; | 
|  | res = dev_set_mtu(slave_dev, bond->dev->mtu); | 
|  | if (res) { | 
|  | slave_err(bond_dev, slave_dev, "Error %d calling dev_set_mtu\n", res); | 
|  | goto err_free; | 
|  | } | 
|  |  | 
|  | /* Save slave's original ("permanent") mac address for modes | 
|  | * that need it, and for restoring it upon release, and then | 
|  | * set it to the master's address | 
|  | */ | 
|  | bond_hw_addr_copy(new_slave->perm_hwaddr, slave_dev->dev_addr, | 
|  | slave_dev->addr_len); | 
|  |  | 
|  | if (!bond->params.fail_over_mac || | 
|  | BOND_MODE(bond) != BOND_MODE_ACTIVEBACKUP) { | 
|  | /* Set slave to master's mac address.  The application already | 
|  | * set the master's mac address to that of the first slave | 
|  | */ | 
|  | memcpy(ss.__data, bond_dev->dev_addr, bond_dev->addr_len); | 
|  | ss.ss_family = slave_dev->type; | 
|  | res = dev_set_mac_address(slave_dev, (struct sockaddr *)&ss, | 
|  | extack); | 
|  | if (res) { | 
|  | slave_err(bond_dev, slave_dev, "Error %d calling set_mac_address\n", res); | 
|  | goto err_restore_mtu; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* set no_addrconf flag before open to prevent IPv6 addrconf */ | 
|  | slave_dev->priv_flags |= IFF_NO_ADDRCONF; | 
|  |  | 
|  | /* open the slave since the application closed it */ | 
|  | res = dev_open(slave_dev, extack); | 
|  | if (res) { | 
|  | slave_err(bond_dev, slave_dev, "Opening slave failed\n"); | 
|  | goto err_restore_mac; | 
|  | } | 
|  |  | 
|  | slave_dev->priv_flags |= IFF_BONDING; | 
|  | /* initialize slave stats */ | 
|  | dev_get_stats(new_slave->dev, &new_slave->slave_stats); | 
|  |  | 
|  | if (bond_is_lb(bond)) { | 
|  | /* bond_alb_init_slave() must be called before all other stages since | 
|  | * it might fail and we do not want to have to undo everything | 
|  | */ | 
|  | res = bond_alb_init_slave(bond, new_slave); | 
|  | if (res) | 
|  | goto err_close; | 
|  | } | 
|  |  | 
|  | res = vlan_vids_add_by_dev(slave_dev, bond_dev); | 
|  | if (res) { | 
|  | slave_err(bond_dev, slave_dev, "Couldn't add bond vlan ids\n"); | 
|  | goto err_close; | 
|  | } | 
|  |  | 
|  | prev_slave = bond_last_slave(bond); | 
|  |  | 
|  | new_slave->delay = 0; | 
|  | new_slave->link_failure_count = 0; | 
|  |  | 
|  | if (bond_update_speed_duplex(new_slave) && | 
|  | bond_needs_speed_duplex(bond)) | 
|  | new_slave->link = BOND_LINK_DOWN; | 
|  |  | 
|  | new_slave->last_rx = jiffies - | 
|  | (msecs_to_jiffies(bond->params.arp_interval) + 1); | 
|  | for (i = 0; i < BOND_MAX_ARP_TARGETS; i++) | 
|  | new_slave->target_last_arp_rx[i] = new_slave->last_rx; | 
|  |  | 
|  | new_slave->last_tx = new_slave->last_rx; | 
|  |  | 
|  | if (bond->params.miimon && !bond->params.use_carrier) { | 
|  | link_reporting = bond_check_dev_link(bond, slave_dev, 1); | 
|  |  | 
|  | if ((link_reporting == -1) && !bond->params.arp_interval) { | 
|  | /* miimon is set but a bonded network driver | 
|  | * does not support ETHTOOL/MII and | 
|  | * arp_interval is not set.  Note: if | 
|  | * use_carrier is enabled, we will never go | 
|  | * here (because netif_carrier is always | 
|  | * supported); thus, we don't need to change | 
|  | * the messages for netif_carrier. | 
|  | */ | 
|  | slave_warn(bond_dev, slave_dev, "MII and ETHTOOL support not available for slave, and arp_interval/arp_ip_target module parameters not specified, thus bonding will not detect link failures! see bonding.txt for details\n"); | 
|  | } else if (link_reporting == -1) { | 
|  | /* unable get link status using mii/ethtool */ | 
|  | slave_warn(bond_dev, slave_dev, "can't get link status from slave; the network driver associated with this interface does not support MII or ETHTOOL link status reporting, thus miimon has no effect on this interface\n"); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* check for initial state */ | 
|  | new_slave->link = BOND_LINK_NOCHANGE; | 
|  | if (bond->params.miimon) { | 
|  | if (bond_check_dev_link(bond, slave_dev, 0) == BMSR_LSTATUS) { | 
|  | if (bond->params.updelay) { | 
|  | bond_set_slave_link_state(new_slave, | 
|  | BOND_LINK_BACK, | 
|  | BOND_SLAVE_NOTIFY_NOW); | 
|  | new_slave->delay = bond->params.updelay; | 
|  | } else { | 
|  | bond_set_slave_link_state(new_slave, | 
|  | BOND_LINK_UP, | 
|  | BOND_SLAVE_NOTIFY_NOW); | 
|  | } | 
|  | } else { | 
|  | bond_set_slave_link_state(new_slave, BOND_LINK_DOWN, | 
|  | BOND_SLAVE_NOTIFY_NOW); | 
|  | } | 
|  | } else if (bond->params.arp_interval) { | 
|  | bond_set_slave_link_state(new_slave, | 
|  | (netif_carrier_ok(slave_dev) ? | 
|  | BOND_LINK_UP : BOND_LINK_DOWN), | 
|  | BOND_SLAVE_NOTIFY_NOW); | 
|  | } else { | 
|  | bond_set_slave_link_state(new_slave, BOND_LINK_UP, | 
|  | BOND_SLAVE_NOTIFY_NOW); | 
|  | } | 
|  |  | 
|  | if (new_slave->link != BOND_LINK_DOWN) | 
|  | new_slave->last_link_up = jiffies; | 
|  | slave_dbg(bond_dev, slave_dev, "Initial state of slave is BOND_LINK_%s\n", | 
|  | new_slave->link == BOND_LINK_DOWN ? "DOWN" : | 
|  | (new_slave->link == BOND_LINK_UP ? "UP" : "BACK")); | 
|  |  | 
|  | if (bond_uses_primary(bond) && bond->params.primary[0]) { | 
|  | /* if there is a primary slave, remember it */ | 
|  | if (strcmp(bond->params.primary, new_slave->dev->name) == 0) { | 
|  | rcu_assign_pointer(bond->primary_slave, new_slave); | 
|  | bond->force_primary = true; | 
|  | } | 
|  | } | 
|  |  | 
|  | switch (BOND_MODE(bond)) { | 
|  | case BOND_MODE_ACTIVEBACKUP: | 
|  | bond_set_slave_inactive_flags(new_slave, | 
|  | BOND_SLAVE_NOTIFY_NOW); | 
|  | break; | 
|  | case BOND_MODE_8023AD: | 
|  | /* in 802.3ad mode, the internal mechanism | 
|  | * will activate the slaves in the selected | 
|  | * aggregator | 
|  | */ | 
|  | bond_set_slave_inactive_flags(new_slave, BOND_SLAVE_NOTIFY_NOW); | 
|  | /* if this is the first slave */ | 
|  | if (!prev_slave) { | 
|  | SLAVE_AD_INFO(new_slave)->id = 1; | 
|  | /* Initialize AD with the number of times that the AD timer is called in 1 second | 
|  | * can be called only after the mac address of the bond is set | 
|  | */ | 
|  | bond_3ad_initialize(bond); | 
|  | } else { | 
|  | SLAVE_AD_INFO(new_slave)->id = | 
|  | SLAVE_AD_INFO(prev_slave)->id + 1; | 
|  | } | 
|  |  | 
|  | bond_3ad_bind_slave(new_slave); | 
|  | break; | 
|  | case BOND_MODE_TLB: | 
|  | case BOND_MODE_ALB: | 
|  | bond_set_active_slave(new_slave); | 
|  | bond_set_slave_inactive_flags(new_slave, BOND_SLAVE_NOTIFY_NOW); | 
|  | break; | 
|  | default: | 
|  | slave_dbg(bond_dev, slave_dev, "This slave is always active in trunk mode\n"); | 
|  |  | 
|  | /* always active in trunk mode */ | 
|  | bond_set_active_slave(new_slave); | 
|  |  | 
|  | /* In trunking mode there is little meaning to curr_active_slave | 
|  | * anyway (it holds no special properties of the bond device), | 
|  | * so we can change it without calling change_active_interface() | 
|  | */ | 
|  | if (!rcu_access_pointer(bond->curr_active_slave) && | 
|  | new_slave->link == BOND_LINK_UP) | 
|  | rcu_assign_pointer(bond->curr_active_slave, new_slave); | 
|  |  | 
|  | break; | 
|  | } /* switch(bond_mode) */ | 
|  |  | 
|  | #ifdef CONFIG_NET_POLL_CONTROLLER | 
|  | if (bond->dev->npinfo) { | 
|  | if (slave_enable_netpoll(new_slave)) { | 
|  | slave_info(bond_dev, slave_dev, "master_dev is using netpoll, but new slave device does not support netpoll\n"); | 
|  | res = -EBUSY; | 
|  | goto err_detach; | 
|  | } | 
|  | } | 
|  | #endif | 
|  |  | 
|  | if (!(bond_dev->features & NETIF_F_LRO)) | 
|  | dev_disable_lro(slave_dev); | 
|  |  | 
|  | res = netdev_rx_handler_register(slave_dev, bond_handle_frame, | 
|  | new_slave); | 
|  | if (res) { | 
|  | slave_dbg(bond_dev, slave_dev, "Error %d calling netdev_rx_handler_register\n", res); | 
|  | goto err_detach; | 
|  | } | 
|  |  | 
|  | res = bond_master_upper_dev_link(bond, new_slave, extack); | 
|  | if (res) { | 
|  | slave_dbg(bond_dev, slave_dev, "Error %d calling bond_master_upper_dev_link\n", res); | 
|  | goto err_unregister; | 
|  | } | 
|  |  | 
|  | bond_lower_state_changed(new_slave); | 
|  |  | 
|  | res = bond_sysfs_slave_add(new_slave); | 
|  | if (res) { | 
|  | slave_dbg(bond_dev, slave_dev, "Error %d calling bond_sysfs_slave_add\n", res); | 
|  | goto err_upper_unlink; | 
|  | } | 
|  |  | 
|  | /* If the mode uses primary, then the following is handled by | 
|  | * bond_change_active_slave(). | 
|  | */ | 
|  | if (!bond_uses_primary(bond)) { | 
|  | /* set promiscuity level to new slave */ | 
|  | if (bond_dev->flags & IFF_PROMISC) { | 
|  | res = dev_set_promiscuity(slave_dev, 1); | 
|  | if (res) | 
|  | goto err_sysfs_del; | 
|  | } | 
|  |  | 
|  | /* set allmulti level to new slave */ | 
|  | if (bond_dev->flags & IFF_ALLMULTI) { | 
|  | res = dev_set_allmulti(slave_dev, 1); | 
|  | if (res) { | 
|  | if (bond_dev->flags & IFF_PROMISC) | 
|  | dev_set_promiscuity(slave_dev, -1); | 
|  | goto err_sysfs_del; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (bond_dev->flags & IFF_UP) { | 
|  | netif_addr_lock_bh(bond_dev); | 
|  | dev_mc_sync_multiple(slave_dev, bond_dev); | 
|  | dev_uc_sync_multiple(slave_dev, bond_dev); | 
|  | netif_addr_unlock_bh(bond_dev); | 
|  |  | 
|  | if (BOND_MODE(bond) == BOND_MODE_8023AD) | 
|  | dev_mc_add(slave_dev, lacpdu_mcast_addr); | 
|  | } | 
|  | } | 
|  |  | 
|  | bond->slave_cnt++; | 
|  | bond_compute_features(bond); | 
|  | bond_set_carrier(bond); | 
|  |  | 
|  | if (bond_uses_primary(bond)) { | 
|  | block_netpoll_tx(); | 
|  | bond_select_active_slave(bond); | 
|  | unblock_netpoll_tx(); | 
|  | } | 
|  |  | 
|  | if (bond_mode_can_use_xmit_hash(bond)) | 
|  | bond_update_slave_arr(bond, NULL); | 
|  |  | 
|  |  | 
|  | if (!slave_dev->netdev_ops->ndo_bpf || | 
|  | !slave_dev->netdev_ops->ndo_xdp_xmit) { | 
|  | if (bond->xdp_prog) { | 
|  | SLAVE_NL_ERR(bond_dev, slave_dev, extack, | 
|  | "Slave does not support XDP"); | 
|  | res = -EOPNOTSUPP; | 
|  | goto err_sysfs_del; | 
|  | } | 
|  | } else if (bond->xdp_prog) { | 
|  | struct netdev_bpf xdp = { | 
|  | .command = XDP_SETUP_PROG, | 
|  | .flags   = 0, | 
|  | .prog    = bond->xdp_prog, | 
|  | .extack  = extack, | 
|  | }; | 
|  |  | 
|  | if (dev_xdp_prog_count(slave_dev) > 0) { | 
|  | SLAVE_NL_ERR(bond_dev, slave_dev, extack, | 
|  | "Slave has XDP program loaded, please unload before enslaving"); | 
|  | res = -EOPNOTSUPP; | 
|  | goto err_sysfs_del; | 
|  | } | 
|  |  | 
|  | res = slave_dev->netdev_ops->ndo_bpf(slave_dev, &xdp); | 
|  | if (res < 0) { | 
|  | /* ndo_bpf() sets extack error message */ | 
|  | slave_dbg(bond_dev, slave_dev, "Error %d calling ndo_bpf\n", res); | 
|  | goto err_sysfs_del; | 
|  | } | 
|  | if (bond->xdp_prog) | 
|  | bpf_prog_inc(bond->xdp_prog); | 
|  | } | 
|  |  | 
|  | bond_xdp_set_features(bond_dev); | 
|  |  | 
|  | slave_info(bond_dev, slave_dev, "Enslaving as %s interface with %s link\n", | 
|  | bond_is_active_slave(new_slave) ? "an active" : "a backup", | 
|  | new_slave->link != BOND_LINK_DOWN ? "an up" : "a down"); | 
|  |  | 
|  | /* enslave is successful */ | 
|  | bond_queue_slave_event(new_slave); | 
|  | return 0; | 
|  |  | 
|  | /* Undo stages on error */ | 
|  | err_sysfs_del: | 
|  | bond_sysfs_slave_del(new_slave); | 
|  |  | 
|  | err_upper_unlink: | 
|  | bond_upper_dev_unlink(bond, new_slave); | 
|  |  | 
|  | err_unregister: | 
|  | netdev_rx_handler_unregister(slave_dev); | 
|  |  | 
|  | err_detach: | 
|  | vlan_vids_del_by_dev(slave_dev, bond_dev); | 
|  | if (rcu_access_pointer(bond->primary_slave) == new_slave) | 
|  | RCU_INIT_POINTER(bond->primary_slave, NULL); | 
|  | if (rcu_access_pointer(bond->curr_active_slave) == new_slave) { | 
|  | block_netpoll_tx(); | 
|  | bond_change_active_slave(bond, NULL); | 
|  | bond_select_active_slave(bond); | 
|  | unblock_netpoll_tx(); | 
|  | } | 
|  | /* either primary_slave or curr_active_slave might've changed */ | 
|  | synchronize_rcu(); | 
|  | slave_disable_netpoll(new_slave); | 
|  |  | 
|  | err_close: | 
|  | if (!netif_is_bond_master(slave_dev)) | 
|  | slave_dev->priv_flags &= ~IFF_BONDING; | 
|  | dev_close(slave_dev); | 
|  |  | 
|  | err_restore_mac: | 
|  | slave_dev->priv_flags &= ~IFF_NO_ADDRCONF; | 
|  | if (!bond->params.fail_over_mac || | 
|  | BOND_MODE(bond) != BOND_MODE_ACTIVEBACKUP) { | 
|  | /* XXX TODO - fom follow mode needs to change master's | 
|  | * MAC if this slave's MAC is in use by the bond, or at | 
|  | * least print a warning. | 
|  | */ | 
|  | bond_hw_addr_copy(ss.__data, new_slave->perm_hwaddr, | 
|  | new_slave->dev->addr_len); | 
|  | ss.ss_family = slave_dev->type; | 
|  | dev_set_mac_address(slave_dev, (struct sockaddr *)&ss, NULL); | 
|  | } | 
|  |  | 
|  | err_restore_mtu: | 
|  | dev_set_mtu(slave_dev, new_slave->original_mtu); | 
|  |  | 
|  | err_free: | 
|  | kobject_put(&new_slave->kobj); | 
|  |  | 
|  | err_undo_flags: | 
|  | /* Enslave of first slave has failed and we need to fix master's mac */ | 
|  | if (!bond_has_slaves(bond)) { | 
|  | if (ether_addr_equal_64bits(bond_dev->dev_addr, | 
|  | slave_dev->dev_addr)) | 
|  | eth_hw_addr_random(bond_dev); | 
|  | if (bond_dev->type != ARPHRD_ETHER) { | 
|  | dev_close(bond_dev); | 
|  | bond_ether_setup(bond_dev); | 
|  | } | 
|  | } | 
|  |  | 
|  | return res; | 
|  | } | 
|  |  | 
|  | /* Try to release the slave device <slave> from the bond device <master> | 
|  | * It is legal to access curr_active_slave without a lock because all the function | 
|  | * is RTNL-locked. If "all" is true it means that the function is being called | 
|  | * while destroying a bond interface and all slaves are being released. | 
|  | * | 
|  | * The rules for slave state should be: | 
|  | *   for Active/Backup: | 
|  | *     Active stays on all backups go down | 
|  | *   for Bonded connections: | 
|  | *     The first up interface should be left on and all others downed. | 
|  | */ | 
|  | static int __bond_release_one(struct net_device *bond_dev, | 
|  | struct net_device *slave_dev, | 
|  | bool all, bool unregister) | 
|  | { | 
|  | struct bonding *bond = netdev_priv(bond_dev); | 
|  | struct slave *slave, *oldcurrent; | 
|  | struct sockaddr_storage ss; | 
|  | int old_flags = bond_dev->flags; | 
|  | netdev_features_t old_features = bond_dev->features; | 
|  |  | 
|  | /* slave is not a slave or master is not master of this slave */ | 
|  | if (!(slave_dev->flags & IFF_SLAVE) || | 
|  | !netdev_has_upper_dev(slave_dev, bond_dev)) { | 
|  | slave_dbg(bond_dev, slave_dev, "cannot release slave\n"); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | block_netpoll_tx(); | 
|  |  | 
|  | slave = bond_get_slave_by_dev(bond, slave_dev); | 
|  | if (!slave) { | 
|  | /* not a slave of this bond */ | 
|  | slave_info(bond_dev, slave_dev, "interface not enslaved\n"); | 
|  | unblock_netpoll_tx(); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | bond_set_slave_inactive_flags(slave, BOND_SLAVE_NOTIFY_NOW); | 
|  |  | 
|  | bond_sysfs_slave_del(slave); | 
|  |  | 
|  | /* recompute stats just before removing the slave */ | 
|  | bond_get_stats(bond->dev, &bond->bond_stats); | 
|  |  | 
|  | if (bond->xdp_prog) { | 
|  | struct netdev_bpf xdp = { | 
|  | .command = XDP_SETUP_PROG, | 
|  | .flags   = 0, | 
|  | .prog	 = NULL, | 
|  | .extack  = NULL, | 
|  | }; | 
|  | if (slave_dev->netdev_ops->ndo_bpf(slave_dev, &xdp)) | 
|  | slave_warn(bond_dev, slave_dev, "failed to unload XDP program\n"); | 
|  | } | 
|  |  | 
|  | /* unregister rx_handler early so bond_handle_frame wouldn't be called | 
|  | * for this slave anymore. | 
|  | */ | 
|  | netdev_rx_handler_unregister(slave_dev); | 
|  |  | 
|  | if (BOND_MODE(bond) == BOND_MODE_8023AD) | 
|  | bond_3ad_unbind_slave(slave); | 
|  |  | 
|  | bond_upper_dev_unlink(bond, slave); | 
|  |  | 
|  | if (bond_mode_can_use_xmit_hash(bond)) | 
|  | bond_update_slave_arr(bond, slave); | 
|  |  | 
|  | slave_info(bond_dev, slave_dev, "Releasing %s interface\n", | 
|  | bond_is_active_slave(slave) ? "active" : "backup"); | 
|  |  | 
|  | oldcurrent = rcu_access_pointer(bond->curr_active_slave); | 
|  |  | 
|  | RCU_INIT_POINTER(bond->current_arp_slave, NULL); | 
|  |  | 
|  | if (!all && (!bond->params.fail_over_mac || | 
|  | BOND_MODE(bond) != BOND_MODE_ACTIVEBACKUP)) { | 
|  | if (ether_addr_equal_64bits(bond_dev->dev_addr, slave->perm_hwaddr) && | 
|  | bond_has_slaves(bond)) | 
|  | slave_warn(bond_dev, slave_dev, "the permanent HWaddr of slave - %pM - is still in use by bond - set the HWaddr of slave to a different address to avoid conflicts\n", | 
|  | slave->perm_hwaddr); | 
|  | } | 
|  |  | 
|  | if (rtnl_dereference(bond->primary_slave) == slave) | 
|  | RCU_INIT_POINTER(bond->primary_slave, NULL); | 
|  |  | 
|  | if (oldcurrent == slave) | 
|  | bond_change_active_slave(bond, NULL); | 
|  |  | 
|  | if (bond_is_lb(bond)) { | 
|  | /* Must be called only after the slave has been | 
|  | * detached from the list and the curr_active_slave | 
|  | * has been cleared (if our_slave == old_current), | 
|  | * but before a new active slave is selected. | 
|  | */ | 
|  | bond_alb_deinit_slave(bond, slave); | 
|  | } | 
|  |  | 
|  | if (all) { | 
|  | RCU_INIT_POINTER(bond->curr_active_slave, NULL); | 
|  | } else if (oldcurrent == slave) { | 
|  | /* Note that we hold RTNL over this sequence, so there | 
|  | * is no concern that another slave add/remove event | 
|  | * will interfere. | 
|  | */ | 
|  | bond_select_active_slave(bond); | 
|  | } | 
|  |  | 
|  | bond_set_carrier(bond); | 
|  | if (!bond_has_slaves(bond)) | 
|  | eth_hw_addr_random(bond_dev); | 
|  |  | 
|  | unblock_netpoll_tx(); | 
|  | synchronize_rcu(); | 
|  | bond->slave_cnt--; | 
|  |  | 
|  | if (!bond_has_slaves(bond)) { | 
|  | call_netdevice_notifiers(NETDEV_CHANGEADDR, bond->dev); | 
|  | call_netdevice_notifiers(NETDEV_RELEASE, bond->dev); | 
|  | } | 
|  |  | 
|  | bond_compute_features(bond); | 
|  | if (!(bond_dev->features & NETIF_F_VLAN_CHALLENGED) && | 
|  | (old_features & NETIF_F_VLAN_CHALLENGED)) | 
|  | slave_info(bond_dev, slave_dev, "last VLAN challenged slave left bond - VLAN blocking is removed\n"); | 
|  |  | 
|  | vlan_vids_del_by_dev(slave_dev, bond_dev); | 
|  |  | 
|  | /* If the mode uses primary, then this case was handled above by | 
|  | * bond_change_active_slave(..., NULL) | 
|  | */ | 
|  | if (!bond_uses_primary(bond)) { | 
|  | /* unset promiscuity level from slave | 
|  | * NOTE: The NETDEV_CHANGEADDR call above may change the value | 
|  | * of the IFF_PROMISC flag in the bond_dev, but we need the | 
|  | * value of that flag before that change, as that was the value | 
|  | * when this slave was attached, so we cache at the start of the | 
|  | * function and use it here. Same goes for ALLMULTI below | 
|  | */ | 
|  | if (old_flags & IFF_PROMISC) | 
|  | dev_set_promiscuity(slave_dev, -1); | 
|  |  | 
|  | /* unset allmulti level from slave */ | 
|  | if (old_flags & IFF_ALLMULTI) | 
|  | dev_set_allmulti(slave_dev, -1); | 
|  |  | 
|  | if (old_flags & IFF_UP) | 
|  | bond_hw_addr_flush(bond_dev, slave_dev); | 
|  | } | 
|  |  | 
|  | slave_disable_netpoll(slave); | 
|  |  | 
|  | /* close slave before restoring its mac address */ | 
|  | dev_close(slave_dev); | 
|  |  | 
|  | slave_dev->priv_flags &= ~IFF_NO_ADDRCONF; | 
|  |  | 
|  | if (bond->params.fail_over_mac != BOND_FOM_ACTIVE || | 
|  | BOND_MODE(bond) != BOND_MODE_ACTIVEBACKUP) { | 
|  | /* restore original ("permanent") mac address */ | 
|  | bond_hw_addr_copy(ss.__data, slave->perm_hwaddr, | 
|  | slave->dev->addr_len); | 
|  | ss.ss_family = slave_dev->type; | 
|  | dev_set_mac_address(slave_dev, (struct sockaddr *)&ss, NULL); | 
|  | } | 
|  |  | 
|  | if (unregister) | 
|  | __dev_set_mtu(slave_dev, slave->original_mtu); | 
|  | else | 
|  | dev_set_mtu(slave_dev, slave->original_mtu); | 
|  |  | 
|  | if (!netif_is_bond_master(slave_dev)) | 
|  | slave_dev->priv_flags &= ~IFF_BONDING; | 
|  |  | 
|  | bond_xdp_set_features(bond_dev); | 
|  | kobject_put(&slave->kobj); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* A wrapper used because of ndo_del_link */ | 
|  | int bond_release(struct net_device *bond_dev, struct net_device *slave_dev) | 
|  | { | 
|  | return __bond_release_one(bond_dev, slave_dev, false, false); | 
|  | } | 
|  |  | 
|  | /* First release a slave and then destroy the bond if no more slaves are left. | 
|  | * Must be under rtnl_lock when this function is called. | 
|  | */ | 
|  | static int bond_release_and_destroy(struct net_device *bond_dev, | 
|  | struct net_device *slave_dev) | 
|  | { | 
|  | struct bonding *bond = netdev_priv(bond_dev); | 
|  | int ret; | 
|  |  | 
|  | ret = __bond_release_one(bond_dev, slave_dev, false, true); | 
|  | if (ret == 0 && !bond_has_slaves(bond) && | 
|  | bond_dev->reg_state != NETREG_UNREGISTERING) { | 
|  | bond_dev->priv_flags |= IFF_DISABLE_NETPOLL; | 
|  | netdev_info(bond_dev, "Destroying bond\n"); | 
|  | bond_remove_proc_entry(bond); | 
|  | unregister_netdevice(bond_dev); | 
|  | } | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static void bond_info_query(struct net_device *bond_dev, struct ifbond *info) | 
|  | { | 
|  | struct bonding *bond = netdev_priv(bond_dev); | 
|  |  | 
|  | bond_fill_ifbond(bond, info); | 
|  | } | 
|  |  | 
|  | static int bond_slave_info_query(struct net_device *bond_dev, struct ifslave *info) | 
|  | { | 
|  | struct bonding *bond = netdev_priv(bond_dev); | 
|  | struct list_head *iter; | 
|  | int i = 0, res = -ENODEV; | 
|  | struct slave *slave; | 
|  |  | 
|  | bond_for_each_slave(bond, slave, iter) { | 
|  | if (i++ == (int)info->slave_id) { | 
|  | res = 0; | 
|  | bond_fill_ifslave(slave, info); | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | return res; | 
|  | } | 
|  |  | 
|  | /*-------------------------------- Monitoring -------------------------------*/ | 
|  |  | 
|  | /* called with rcu_read_lock() */ | 
|  | static int bond_miimon_inspect(struct bonding *bond) | 
|  | { | 
|  | bool ignore_updelay = false; | 
|  | int link_state, commit = 0; | 
|  | struct list_head *iter; | 
|  | struct slave *slave; | 
|  |  | 
|  | if (BOND_MODE(bond) == BOND_MODE_ACTIVEBACKUP) { | 
|  | ignore_updelay = !rcu_dereference(bond->curr_active_slave); | 
|  | } else { | 
|  | struct bond_up_slave *usable_slaves; | 
|  |  | 
|  | usable_slaves = rcu_dereference(bond->usable_slaves); | 
|  |  | 
|  | if (usable_slaves && usable_slaves->count == 0) | 
|  | ignore_updelay = true; | 
|  | } | 
|  |  | 
|  | bond_for_each_slave_rcu(bond, slave, iter) { | 
|  | bond_propose_link_state(slave, BOND_LINK_NOCHANGE); | 
|  |  | 
|  | link_state = bond_check_dev_link(bond, slave->dev, 0); | 
|  |  | 
|  | switch (slave->link) { | 
|  | case BOND_LINK_UP: | 
|  | if (link_state) | 
|  | continue; | 
|  |  | 
|  | bond_propose_link_state(slave, BOND_LINK_FAIL); | 
|  | commit++; | 
|  | slave->delay = bond->params.downdelay; | 
|  | if (slave->delay) { | 
|  | slave_info(bond->dev, slave->dev, "link status down for %sinterface, disabling it in %d ms\n", | 
|  | (BOND_MODE(bond) == | 
|  | BOND_MODE_ACTIVEBACKUP) ? | 
|  | (bond_is_active_slave(slave) ? | 
|  | "active " : "backup ") : "", | 
|  | bond->params.downdelay * bond->params.miimon); | 
|  | } | 
|  | fallthrough; | 
|  | case BOND_LINK_FAIL: | 
|  | if (link_state) { | 
|  | /* recovered before downdelay expired */ | 
|  | bond_propose_link_state(slave, BOND_LINK_UP); | 
|  | slave->last_link_up = jiffies; | 
|  | slave_info(bond->dev, slave->dev, "link status up again after %d ms\n", | 
|  | (bond->params.downdelay - slave->delay) * | 
|  | bond->params.miimon); | 
|  | commit++; | 
|  | continue; | 
|  | } | 
|  |  | 
|  | if (slave->delay <= 0) { | 
|  | bond_propose_link_state(slave, BOND_LINK_DOWN); | 
|  | commit++; | 
|  | continue; | 
|  | } | 
|  |  | 
|  | slave->delay--; | 
|  | break; | 
|  |  | 
|  | case BOND_LINK_DOWN: | 
|  | if (!link_state) | 
|  | continue; | 
|  |  | 
|  | bond_propose_link_state(slave, BOND_LINK_BACK); | 
|  | commit++; | 
|  | slave->delay = bond->params.updelay; | 
|  |  | 
|  | if (slave->delay) { | 
|  | slave_info(bond->dev, slave->dev, "link status up, enabling it in %d ms\n", | 
|  | ignore_updelay ? 0 : | 
|  | bond->params.updelay * | 
|  | bond->params.miimon); | 
|  | } | 
|  | fallthrough; | 
|  | case BOND_LINK_BACK: | 
|  | if (!link_state) { | 
|  | bond_propose_link_state(slave, BOND_LINK_DOWN); | 
|  | slave_info(bond->dev, slave->dev, "link status down again after %d ms\n", | 
|  | (bond->params.updelay - slave->delay) * | 
|  | bond->params.miimon); | 
|  | commit++; | 
|  | continue; | 
|  | } | 
|  |  | 
|  | if (ignore_updelay) | 
|  | slave->delay = 0; | 
|  |  | 
|  | if (slave->delay <= 0) { | 
|  | bond_propose_link_state(slave, BOND_LINK_UP); | 
|  | commit++; | 
|  | ignore_updelay = false; | 
|  | continue; | 
|  | } | 
|  |  | 
|  | slave->delay--; | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | return commit; | 
|  | } | 
|  |  | 
|  | static void bond_miimon_link_change(struct bonding *bond, | 
|  | struct slave *slave, | 
|  | char link) | 
|  | { | 
|  | switch (BOND_MODE(bond)) { | 
|  | case BOND_MODE_8023AD: | 
|  | bond_3ad_handle_link_change(slave, link); | 
|  | break; | 
|  | case BOND_MODE_TLB: | 
|  | case BOND_MODE_ALB: | 
|  | bond_alb_handle_link_change(bond, slave, link); | 
|  | break; | 
|  | case BOND_MODE_XOR: | 
|  | bond_update_slave_arr(bond, NULL); | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | static void bond_miimon_commit(struct bonding *bond) | 
|  | { | 
|  | struct slave *slave, *primary, *active; | 
|  | bool do_failover = false; | 
|  | struct list_head *iter; | 
|  |  | 
|  | ASSERT_RTNL(); | 
|  |  | 
|  | bond_for_each_slave(bond, slave, iter) { | 
|  | switch (slave->link_new_state) { | 
|  | case BOND_LINK_NOCHANGE: | 
|  | /* For 802.3ad mode, check current slave speed and | 
|  | * duplex again in case its port was disabled after | 
|  | * invalid speed/duplex reporting but recovered before | 
|  | * link monitoring could make a decision on the actual | 
|  | * link status | 
|  | */ | 
|  | if (BOND_MODE(bond) == BOND_MODE_8023AD && | 
|  | slave->link == BOND_LINK_UP) | 
|  | bond_3ad_adapter_speed_duplex_changed(slave); | 
|  | continue; | 
|  |  | 
|  | case BOND_LINK_UP: | 
|  | if (bond_update_speed_duplex(slave) && | 
|  | bond_needs_speed_duplex(bond)) { | 
|  | slave->link = BOND_LINK_DOWN; | 
|  | if (net_ratelimit()) | 
|  | slave_warn(bond->dev, slave->dev, | 
|  | "failed to get link speed/duplex\n"); | 
|  | continue; | 
|  | } | 
|  | bond_set_slave_link_state(slave, BOND_LINK_UP, | 
|  | BOND_SLAVE_NOTIFY_NOW); | 
|  | slave->last_link_up = jiffies; | 
|  |  | 
|  | primary = rtnl_dereference(bond->primary_slave); | 
|  | if (BOND_MODE(bond) == BOND_MODE_8023AD) { | 
|  | /* prevent it from being the active one */ | 
|  | bond_set_backup_slave(slave); | 
|  | } else if (BOND_MODE(bond) != BOND_MODE_ACTIVEBACKUP) { | 
|  | /* make it immediately active */ | 
|  | bond_set_active_slave(slave); | 
|  | } | 
|  |  | 
|  | slave_info(bond->dev, slave->dev, "link status definitely up, %u Mbps %s duplex\n", | 
|  | slave->speed == SPEED_UNKNOWN ? 0 : slave->speed, | 
|  | slave->duplex ? "full" : "half"); | 
|  |  | 
|  | bond_miimon_link_change(bond, slave, BOND_LINK_UP); | 
|  |  | 
|  | active = rtnl_dereference(bond->curr_active_slave); | 
|  | if (!active || slave == primary || slave->prio > active->prio) | 
|  | do_failover = true; | 
|  |  | 
|  | continue; | 
|  |  | 
|  | case BOND_LINK_DOWN: | 
|  | if (slave->link_failure_count < UINT_MAX) | 
|  | slave->link_failure_count++; | 
|  |  | 
|  | bond_set_slave_link_state(slave, BOND_LINK_DOWN, | 
|  | BOND_SLAVE_NOTIFY_NOW); | 
|  |  | 
|  | if (BOND_MODE(bond) == BOND_MODE_ACTIVEBACKUP || | 
|  | BOND_MODE(bond) == BOND_MODE_8023AD) | 
|  | bond_set_slave_inactive_flags(slave, | 
|  | BOND_SLAVE_NOTIFY_NOW); | 
|  |  | 
|  | slave_info(bond->dev, slave->dev, "link status definitely down, disabling slave\n"); | 
|  |  | 
|  | bond_miimon_link_change(bond, slave, BOND_LINK_DOWN); | 
|  |  | 
|  | if (slave == rcu_access_pointer(bond->curr_active_slave)) | 
|  | do_failover = true; | 
|  |  | 
|  | continue; | 
|  |  | 
|  | default: | 
|  | slave_err(bond->dev, slave->dev, "invalid new link %d on slave\n", | 
|  | slave->link_new_state); | 
|  | bond_propose_link_state(slave, BOND_LINK_NOCHANGE); | 
|  |  | 
|  | continue; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (do_failover) { | 
|  | block_netpoll_tx(); | 
|  | bond_select_active_slave(bond); | 
|  | unblock_netpoll_tx(); | 
|  | } | 
|  |  | 
|  | bond_set_carrier(bond); | 
|  | } | 
|  |  | 
|  | /* bond_mii_monitor | 
|  | * | 
|  | * Really a wrapper that splits the mii monitor into two phases: an | 
|  | * inspection, then (if inspection indicates something needs to be done) | 
|  | * an acquisition of appropriate locks followed by a commit phase to | 
|  | * implement whatever link state changes are indicated. | 
|  | */ | 
|  | static void bond_mii_monitor(struct work_struct *work) | 
|  | { | 
|  | struct bonding *bond = container_of(work, struct bonding, | 
|  | mii_work.work); | 
|  | bool should_notify_peers = false; | 
|  | bool commit; | 
|  | unsigned long delay; | 
|  | struct slave *slave; | 
|  | struct list_head *iter; | 
|  |  | 
|  | delay = msecs_to_jiffies(bond->params.miimon); | 
|  |  | 
|  | if (!bond_has_slaves(bond)) | 
|  | goto re_arm; | 
|  |  | 
|  | rcu_read_lock(); | 
|  | should_notify_peers = bond_should_notify_peers(bond); | 
|  | commit = !!bond_miimon_inspect(bond); | 
|  | if (bond->send_peer_notif) { | 
|  | rcu_read_unlock(); | 
|  | if (rtnl_trylock()) { | 
|  | bond->send_peer_notif--; | 
|  | rtnl_unlock(); | 
|  | } | 
|  | } else { | 
|  | rcu_read_unlock(); | 
|  | } | 
|  |  | 
|  | if (commit) { | 
|  | /* Race avoidance with bond_close cancel of workqueue */ | 
|  | if (!rtnl_trylock()) { | 
|  | delay = 1; | 
|  | should_notify_peers = false; | 
|  | goto re_arm; | 
|  | } | 
|  |  | 
|  | bond_for_each_slave(bond, slave, iter) { | 
|  | bond_commit_link_state(slave, BOND_SLAVE_NOTIFY_LATER); | 
|  | } | 
|  | bond_miimon_commit(bond); | 
|  |  | 
|  | rtnl_unlock();	/* might sleep, hold no other locks */ | 
|  | } | 
|  |  | 
|  | re_arm: | 
|  | if (bond->params.miimon) | 
|  | queue_delayed_work(bond->wq, &bond->mii_work, delay); | 
|  |  | 
|  | if (should_notify_peers) { | 
|  | if (!rtnl_trylock()) | 
|  | return; | 
|  | call_netdevice_notifiers(NETDEV_NOTIFY_PEERS, bond->dev); | 
|  | rtnl_unlock(); | 
|  | } | 
|  | } | 
|  |  | 
|  | static int bond_upper_dev_walk(struct net_device *upper, | 
|  | struct netdev_nested_priv *priv) | 
|  | { | 
|  | __be32 ip = *(__be32 *)priv->data; | 
|  |  | 
|  | return ip == bond_confirm_addr(upper, 0, ip); | 
|  | } | 
|  |  | 
|  | static bool bond_has_this_ip(struct bonding *bond, __be32 ip) | 
|  | { | 
|  | struct netdev_nested_priv priv = { | 
|  | .data = (void *)&ip, | 
|  | }; | 
|  | bool ret = false; | 
|  |  | 
|  | if (ip == bond_confirm_addr(bond->dev, 0, ip)) | 
|  | return true; | 
|  |  | 
|  | rcu_read_lock(); | 
|  | if (netdev_walk_all_upper_dev_rcu(bond->dev, bond_upper_dev_walk, &priv)) | 
|  | ret = true; | 
|  | rcu_read_unlock(); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | #define BOND_VLAN_PROTO_NONE cpu_to_be16(0xffff) | 
|  |  | 
|  | static bool bond_handle_vlan(struct slave *slave, struct bond_vlan_tag *tags, | 
|  | struct sk_buff *skb) | 
|  | { | 
|  | struct net_device *bond_dev = slave->bond->dev; | 
|  | struct net_device *slave_dev = slave->dev; | 
|  | struct bond_vlan_tag *outer_tag = tags; | 
|  |  | 
|  | if (!tags || tags->vlan_proto == BOND_VLAN_PROTO_NONE) | 
|  | return true; | 
|  |  | 
|  | tags++; | 
|  |  | 
|  | /* Go through all the tags backwards and add them to the packet */ | 
|  | while (tags->vlan_proto != BOND_VLAN_PROTO_NONE) { | 
|  | if (!tags->vlan_id) { | 
|  | tags++; | 
|  | continue; | 
|  | } | 
|  |  | 
|  | slave_dbg(bond_dev, slave_dev, "inner tag: proto %X vid %X\n", | 
|  | ntohs(outer_tag->vlan_proto), tags->vlan_id); | 
|  | skb = vlan_insert_tag_set_proto(skb, tags->vlan_proto, | 
|  | tags->vlan_id); | 
|  | if (!skb) { | 
|  | net_err_ratelimited("failed to insert inner VLAN tag\n"); | 
|  | return false; | 
|  | } | 
|  |  | 
|  | tags++; | 
|  | } | 
|  | /* Set the outer tag */ | 
|  | if (outer_tag->vlan_id) { | 
|  | slave_dbg(bond_dev, slave_dev, "outer tag: proto %X vid %X\n", | 
|  | ntohs(outer_tag->vlan_proto), outer_tag->vlan_id); | 
|  | __vlan_hwaccel_put_tag(skb, outer_tag->vlan_proto, | 
|  | outer_tag->vlan_id); | 
|  | } | 
|  |  | 
|  | return true; | 
|  | } | 
|  |  | 
|  | /* We go to the (large) trouble of VLAN tagging ARP frames because | 
|  | * switches in VLAN mode (especially if ports are configured as | 
|  | * "native" to a VLAN) might not pass non-tagged frames. | 
|  | */ | 
|  | static void bond_arp_send(struct slave *slave, int arp_op, __be32 dest_ip, | 
|  | __be32 src_ip, struct bond_vlan_tag *tags) | 
|  | { | 
|  | struct net_device *bond_dev = slave->bond->dev; | 
|  | struct net_device *slave_dev = slave->dev; | 
|  | struct sk_buff *skb; | 
|  |  | 
|  | slave_dbg(bond_dev, slave_dev, "arp %d on slave: dst %pI4 src %pI4\n", | 
|  | arp_op, &dest_ip, &src_ip); | 
|  |  | 
|  | skb = arp_create(arp_op, ETH_P_ARP, dest_ip, slave_dev, src_ip, | 
|  | NULL, slave_dev->dev_addr, NULL); | 
|  |  | 
|  | if (!skb) { | 
|  | net_err_ratelimited("ARP packet allocation failed\n"); | 
|  | return; | 
|  | } | 
|  |  | 
|  | if (bond_handle_vlan(slave, tags, skb)) { | 
|  | slave_update_last_tx(slave); | 
|  | arp_xmit(skb); | 
|  | } | 
|  |  | 
|  | return; | 
|  | } | 
|  |  | 
|  | /* Validate the device path between the @start_dev and the @end_dev. | 
|  | * The path is valid if the @end_dev is reachable through device | 
|  | * stacking. | 
|  | * When the path is validated, collect any vlan information in the | 
|  | * path. | 
|  | */ | 
|  | struct bond_vlan_tag *bond_verify_device_path(struct net_device *start_dev, | 
|  | struct net_device *end_dev, | 
|  | int level) | 
|  | { | 
|  | struct bond_vlan_tag *tags; | 
|  | struct net_device *upper; | 
|  | struct list_head  *iter; | 
|  |  | 
|  | if (start_dev == end_dev) { | 
|  | tags = kcalloc(level + 1, sizeof(*tags), GFP_ATOMIC); | 
|  | if (!tags) | 
|  | return ERR_PTR(-ENOMEM); | 
|  | tags[level].vlan_proto = BOND_VLAN_PROTO_NONE; | 
|  | return tags; | 
|  | } | 
|  |  | 
|  | netdev_for_each_upper_dev_rcu(start_dev, upper, iter) { | 
|  | tags = bond_verify_device_path(upper, end_dev, level + 1); | 
|  | if (IS_ERR_OR_NULL(tags)) { | 
|  | if (IS_ERR(tags)) | 
|  | return tags; | 
|  | continue; | 
|  | } | 
|  | if (is_vlan_dev(upper)) { | 
|  | tags[level].vlan_proto = vlan_dev_vlan_proto(upper); | 
|  | tags[level].vlan_id = vlan_dev_vlan_id(upper); | 
|  | } | 
|  |  | 
|  | return tags; | 
|  | } | 
|  |  | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | static void bond_arp_send_all(struct bonding *bond, struct slave *slave) | 
|  | { | 
|  | struct rtable *rt; | 
|  | struct bond_vlan_tag *tags; | 
|  | __be32 *targets = bond->params.arp_targets, addr; | 
|  | int i; | 
|  |  | 
|  | for (i = 0; i < BOND_MAX_ARP_TARGETS && targets[i]; i++) { | 
|  | slave_dbg(bond->dev, slave->dev, "%s: target %pI4\n", | 
|  | __func__, &targets[i]); | 
|  | tags = NULL; | 
|  |  | 
|  | /* Find out through which dev should the packet go */ | 
|  | rt = ip_route_output(dev_net(bond->dev), targets[i], 0, | 
|  | RTO_ONLINK, 0); | 
|  | if (IS_ERR(rt)) { | 
|  | /* there's no route to target - try to send arp | 
|  | * probe to generate any traffic (arp_validate=0) | 
|  | */ | 
|  | if (bond->params.arp_validate) | 
|  | pr_warn_once("%s: no route to arp_ip_target %pI4 and arp_validate is set\n", | 
|  | bond->dev->name, | 
|  | &targets[i]); | 
|  | bond_arp_send(slave, ARPOP_REQUEST, targets[i], | 
|  | 0, tags); | 
|  | continue; | 
|  | } | 
|  |  | 
|  | /* bond device itself */ | 
|  | if (rt->dst.dev == bond->dev) | 
|  | goto found; | 
|  |  | 
|  | rcu_read_lock(); | 
|  | tags = bond_verify_device_path(bond->dev, rt->dst.dev, 0); | 
|  | rcu_read_unlock(); | 
|  |  | 
|  | if (!IS_ERR_OR_NULL(tags)) | 
|  | goto found; | 
|  |  | 
|  | /* Not our device - skip */ | 
|  | slave_dbg(bond->dev, slave->dev, "no path to arp_ip_target %pI4 via rt.dev %s\n", | 
|  | &targets[i], rt->dst.dev ? rt->dst.dev->name : "NULL"); | 
|  |  | 
|  | ip_rt_put(rt); | 
|  | continue; | 
|  |  | 
|  | found: | 
|  | addr = bond_confirm_addr(rt->dst.dev, targets[i], 0); | 
|  | ip_rt_put(rt); | 
|  | bond_arp_send(slave, ARPOP_REQUEST, targets[i], addr, tags); | 
|  | kfree(tags); | 
|  | } | 
|  | } | 
|  |  | 
|  | static void bond_validate_arp(struct bonding *bond, struct slave *slave, __be32 sip, __be32 tip) | 
|  | { | 
|  | int i; | 
|  |  | 
|  | if (!sip || !bond_has_this_ip(bond, tip)) { | 
|  | slave_dbg(bond->dev, slave->dev, "%s: sip %pI4 tip %pI4 not found\n", | 
|  | __func__, &sip, &tip); | 
|  | return; | 
|  | } | 
|  |  | 
|  | i = bond_get_targets_ip(bond->params.arp_targets, sip); | 
|  | if (i == -1) { | 
|  | slave_dbg(bond->dev, slave->dev, "%s: sip %pI4 not found in targets\n", | 
|  | __func__, &sip); | 
|  | return; | 
|  | } | 
|  | slave->last_rx = jiffies; | 
|  | slave->target_last_arp_rx[i] = jiffies; | 
|  | } | 
|  |  | 
|  | static int bond_arp_rcv(const struct sk_buff *skb, struct bonding *bond, | 
|  | struct slave *slave) | 
|  | { | 
|  | struct arphdr *arp = (struct arphdr *)skb->data; | 
|  | struct slave *curr_active_slave, *curr_arp_slave; | 
|  | unsigned char *arp_ptr; | 
|  | __be32 sip, tip; | 
|  | unsigned int alen; | 
|  |  | 
|  | alen = arp_hdr_len(bond->dev); | 
|  |  | 
|  | if (alen > skb_headlen(skb)) { | 
|  | arp = kmalloc(alen, GFP_ATOMIC); | 
|  | if (!arp) | 
|  | goto out_unlock; | 
|  | if (skb_copy_bits(skb, 0, arp, alen) < 0) | 
|  | goto out_unlock; | 
|  | } | 
|  |  | 
|  | if (arp->ar_hln != bond->dev->addr_len || | 
|  | skb->pkt_type == PACKET_OTHERHOST || | 
|  | skb->pkt_type == PACKET_LOOPBACK || | 
|  | arp->ar_hrd != htons(ARPHRD_ETHER) || | 
|  | arp->ar_pro != htons(ETH_P_IP) || | 
|  | arp->ar_pln != 4) | 
|  | goto out_unlock; | 
|  |  | 
|  | arp_ptr = (unsigned char *)(arp + 1); | 
|  | arp_ptr += bond->dev->addr_len; | 
|  | memcpy(&sip, arp_ptr, 4); | 
|  | arp_ptr += 4 + bond->dev->addr_len; | 
|  | memcpy(&tip, arp_ptr, 4); | 
|  |  | 
|  | slave_dbg(bond->dev, slave->dev, "%s: %s/%d av %d sv %d sip %pI4 tip %pI4\n", | 
|  | __func__, slave->dev->name, bond_slave_state(slave), | 
|  | bond->params.arp_validate, slave_do_arp_validate(bond, slave), | 
|  | &sip, &tip); | 
|  |  | 
|  | curr_active_slave = rcu_dereference(bond->curr_active_slave); | 
|  | curr_arp_slave = rcu_dereference(bond->current_arp_slave); | 
|  |  | 
|  | /* We 'trust' the received ARP enough to validate it if: | 
|  | * | 
|  | * (a) the slave receiving the ARP is active (which includes the | 
|  | * current ARP slave, if any), or | 
|  | * | 
|  | * (b) the receiving slave isn't active, but there is a currently | 
|  | * active slave and it received valid arp reply(s) after it became | 
|  | * the currently active slave, or | 
|  | * | 
|  | * (c) there is an ARP slave that sent an ARP during the prior ARP | 
|  | * interval, and we receive an ARP reply on any slave.  We accept | 
|  | * these because switch FDB update delays may deliver the ARP | 
|  | * reply to a slave other than the sender of the ARP request. | 
|  | * | 
|  | * Note: for (b), backup slaves are receiving the broadcast ARP | 
|  | * request, not a reply.  This request passes from the sending | 
|  | * slave through the L2 switch(es) to the receiving slave.  Since | 
|  | * this is checking the request, sip/tip are swapped for | 
|  | * validation. | 
|  | * | 
|  | * This is done to avoid endless looping when we can't reach the | 
|  | * arp_ip_target and fool ourselves with our own arp requests. | 
|  | */ | 
|  | if (bond_is_active_slave(slave)) | 
|  | bond_validate_arp(bond, slave, sip, tip); | 
|  | else if (curr_active_slave && | 
|  | time_after(slave_last_rx(bond, curr_active_slave), | 
|  | curr_active_slave->last_link_up)) | 
|  | bond_validate_arp(bond, slave, tip, sip); | 
|  | else if (curr_arp_slave && (arp->ar_op == htons(ARPOP_REPLY)) && | 
|  | bond_time_in_interval(bond, slave_last_tx(curr_arp_slave), 1)) | 
|  | bond_validate_arp(bond, slave, sip, tip); | 
|  |  | 
|  | out_unlock: | 
|  | if (arp != (struct arphdr *)skb->data) | 
|  | kfree(arp); | 
|  | return RX_HANDLER_ANOTHER; | 
|  | } | 
|  |  | 
|  | #if IS_ENABLED(CONFIG_IPV6) | 
|  | static void bond_ns_send(struct slave *slave, const struct in6_addr *daddr, | 
|  | const struct in6_addr *saddr, struct bond_vlan_tag *tags) | 
|  | { | 
|  | struct net_device *bond_dev = slave->bond->dev; | 
|  | struct net_device *slave_dev = slave->dev; | 
|  | struct in6_addr mcaddr; | 
|  | struct sk_buff *skb; | 
|  |  | 
|  | slave_dbg(bond_dev, slave_dev, "NS on slave: dst %pI6c src %pI6c\n", | 
|  | daddr, saddr); | 
|  |  | 
|  | skb = ndisc_ns_create(slave_dev, daddr, saddr, 0); | 
|  | if (!skb) { | 
|  | net_err_ratelimited("NS packet allocation failed\n"); | 
|  | return; | 
|  | } | 
|  |  | 
|  | addrconf_addr_solict_mult(daddr, &mcaddr); | 
|  | if (bond_handle_vlan(slave, tags, skb)) { | 
|  | slave_update_last_tx(slave); | 
|  | ndisc_send_skb(skb, &mcaddr, saddr); | 
|  | } | 
|  | } | 
|  |  | 
|  | static void bond_ns_send_all(struct bonding *bond, struct slave *slave) | 
|  | { | 
|  | struct in6_addr *targets = bond->params.ns_targets; | 
|  | struct bond_vlan_tag *tags; | 
|  | struct dst_entry *dst; | 
|  | struct in6_addr saddr; | 
|  | struct flowi6 fl6; | 
|  | int i; | 
|  |  | 
|  | for (i = 0; i < BOND_MAX_NS_TARGETS && !ipv6_addr_any(&targets[i]); i++) { | 
|  | slave_dbg(bond->dev, slave->dev, "%s: target %pI6c\n", | 
|  | __func__, &targets[i]); | 
|  | tags = NULL; | 
|  |  | 
|  | /* Find out through which dev should the packet go */ | 
|  | memset(&fl6, 0, sizeof(struct flowi6)); | 
|  | fl6.daddr = targets[i]; | 
|  | fl6.flowi6_oif = bond->dev->ifindex; | 
|  |  | 
|  | dst = ip6_route_output(dev_net(bond->dev), NULL, &fl6); | 
|  | if (dst->error) { | 
|  | dst_release(dst); | 
|  | /* there's no route to target - try to send arp | 
|  | * probe to generate any traffic (arp_validate=0) | 
|  | */ | 
|  | if (bond->params.arp_validate) | 
|  | pr_warn_once("%s: no route to ns_ip6_target %pI6c and arp_validate is set\n", | 
|  | bond->dev->name, | 
|  | &targets[i]); | 
|  | bond_ns_send(slave, &targets[i], &in6addr_any, tags); | 
|  | continue; | 
|  | } | 
|  |  | 
|  | /* bond device itself */ | 
|  | if (dst->dev == bond->dev) | 
|  | goto found; | 
|  |  | 
|  | rcu_read_lock(); | 
|  | tags = bond_verify_device_path(bond->dev, dst->dev, 0); | 
|  | rcu_read_unlock(); | 
|  |  | 
|  | if (!IS_ERR_OR_NULL(tags)) | 
|  | goto found; | 
|  |  | 
|  | /* Not our device - skip */ | 
|  | slave_dbg(bond->dev, slave->dev, "no path to ns_ip6_target %pI6c via dst->dev %s\n", | 
|  | &targets[i], dst->dev ? dst->dev->name : "NULL"); | 
|  |  | 
|  | dst_release(dst); | 
|  | continue; | 
|  |  | 
|  | found: | 
|  | if (!ipv6_dev_get_saddr(dev_net(dst->dev), dst->dev, &targets[i], 0, &saddr)) | 
|  | bond_ns_send(slave, &targets[i], &saddr, tags); | 
|  | else | 
|  | bond_ns_send(slave, &targets[i], &in6addr_any, tags); | 
|  |  | 
|  | dst_release(dst); | 
|  | kfree(tags); | 
|  | } | 
|  | } | 
|  |  | 
|  | static int bond_confirm_addr6(struct net_device *dev, | 
|  | struct netdev_nested_priv *priv) | 
|  | { | 
|  | struct in6_addr *addr = (struct in6_addr *)priv->data; | 
|  |  | 
|  | return ipv6_chk_addr(dev_net(dev), addr, dev, 0); | 
|  | } | 
|  |  | 
|  | static bool bond_has_this_ip6(struct bonding *bond, struct in6_addr *addr) | 
|  | { | 
|  | struct netdev_nested_priv priv = { | 
|  | .data = addr, | 
|  | }; | 
|  | int ret = false; | 
|  |  | 
|  | if (bond_confirm_addr6(bond->dev, &priv)) | 
|  | return true; | 
|  |  | 
|  | rcu_read_lock(); | 
|  | if (netdev_walk_all_upper_dev_rcu(bond->dev, bond_confirm_addr6, &priv)) | 
|  | ret = true; | 
|  | rcu_read_unlock(); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static void bond_validate_na(struct bonding *bond, struct slave *slave, | 
|  | struct in6_addr *saddr, struct in6_addr *daddr) | 
|  | { | 
|  | int i; | 
|  |  | 
|  | /* Ignore NAs that: | 
|  | * 1. Source address is unspecified address. | 
|  | * 2. Dest address is neither all-nodes multicast address nor | 
|  | *    exist on bond interface. | 
|  | */ | 
|  | if (ipv6_addr_any(saddr) || | 
|  | (!ipv6_addr_equal(daddr, &in6addr_linklocal_allnodes) && | 
|  | !bond_has_this_ip6(bond, daddr))) { | 
|  | slave_dbg(bond->dev, slave->dev, "%s: sip %pI6c tip %pI6c not found\n", | 
|  | __func__, saddr, daddr); | 
|  | return; | 
|  | } | 
|  |  | 
|  | i = bond_get_targets_ip6(bond->params.ns_targets, saddr); | 
|  | if (i == -1) { | 
|  | slave_dbg(bond->dev, slave->dev, "%s: sip %pI6c not found in targets\n", | 
|  | __func__, saddr); | 
|  | return; | 
|  | } | 
|  | slave->last_rx = jiffies; | 
|  | slave->target_last_arp_rx[i] = jiffies; | 
|  | } | 
|  |  | 
|  | static int bond_na_rcv(const struct sk_buff *skb, struct bonding *bond, | 
|  | struct slave *slave) | 
|  | { | 
|  | struct slave *curr_active_slave, *curr_arp_slave; | 
|  | struct in6_addr *saddr, *daddr; | 
|  | struct { | 
|  | struct ipv6hdr ip6; | 
|  | struct icmp6hdr icmp6; | 
|  | } *combined, _combined; | 
|  |  | 
|  | if (skb->pkt_type == PACKET_OTHERHOST || | 
|  | skb->pkt_type == PACKET_LOOPBACK) | 
|  | goto out; | 
|  |  | 
|  | combined = skb_header_pointer(skb, 0, sizeof(_combined), &_combined); | 
|  | if (!combined || combined->ip6.nexthdr != NEXTHDR_ICMP || | 
|  | (combined->icmp6.icmp6_type != NDISC_NEIGHBOUR_SOLICITATION && | 
|  | combined->icmp6.icmp6_type != NDISC_NEIGHBOUR_ADVERTISEMENT)) | 
|  | goto out; | 
|  |  | 
|  | saddr = &combined->ip6.saddr; | 
|  | daddr = &combined->ip6.daddr; | 
|  |  | 
|  | slave_dbg(bond->dev, slave->dev, "%s: %s/%d av %d sv %d sip %pI6c tip %pI6c\n", | 
|  | __func__, slave->dev->name, bond_slave_state(slave), | 
|  | bond->params.arp_validate, slave_do_arp_validate(bond, slave), | 
|  | saddr, daddr); | 
|  |  | 
|  | curr_active_slave = rcu_dereference(bond->curr_active_slave); | 
|  | curr_arp_slave = rcu_dereference(bond->current_arp_slave); | 
|  |  | 
|  | /* We 'trust' the received ARP enough to validate it if: | 
|  | * see bond_arp_rcv(). | 
|  | */ | 
|  | if (bond_is_active_slave(slave)) | 
|  | bond_validate_na(bond, slave, saddr, daddr); | 
|  | else if (curr_active_slave && | 
|  | time_after(slave_last_rx(bond, curr_active_slave), | 
|  | curr_active_slave->last_link_up)) | 
|  | bond_validate_na(bond, slave, daddr, saddr); | 
|  | else if (curr_arp_slave && | 
|  | bond_time_in_interval(bond, slave_last_tx(curr_arp_slave), 1)) | 
|  | bond_validate_na(bond, slave, saddr, daddr); | 
|  |  | 
|  | out: | 
|  | return RX_HANDLER_ANOTHER; | 
|  | } | 
|  | #endif | 
|  |  | 
|  | int bond_rcv_validate(const struct sk_buff *skb, struct bonding *bond, | 
|  | struct slave *slave) | 
|  | { | 
|  | #if IS_ENABLED(CONFIG_IPV6) | 
|  | bool is_ipv6 = skb->protocol == __cpu_to_be16(ETH_P_IPV6); | 
|  | #endif | 
|  | bool is_arp = skb->protocol == __cpu_to_be16(ETH_P_ARP); | 
|  |  | 
|  | slave_dbg(bond->dev, slave->dev, "%s: skb->dev %s\n", | 
|  | __func__, skb->dev->name); | 
|  |  | 
|  | /* Use arp validate logic for both ARP and NS */ | 
|  | if (!slave_do_arp_validate(bond, slave)) { | 
|  | if ((slave_do_arp_validate_only(bond) && is_arp) || | 
|  | #if IS_ENABLED(CONFIG_IPV6) | 
|  | (slave_do_arp_validate_only(bond) && is_ipv6) || | 
|  | #endif | 
|  | !slave_do_arp_validate_only(bond)) | 
|  | slave->last_rx = jiffies; | 
|  | return RX_HANDLER_ANOTHER; | 
|  | } else if (is_arp) { | 
|  | return bond_arp_rcv(skb, bond, slave); | 
|  | #if IS_ENABLED(CONFIG_IPV6) | 
|  | } else if (is_ipv6) { | 
|  | return bond_na_rcv(skb, bond, slave); | 
|  | #endif | 
|  | } else { | 
|  | return RX_HANDLER_ANOTHER; | 
|  | } | 
|  | } | 
|  |  | 
|  | static void bond_send_validate(struct bonding *bond, struct slave *slave) | 
|  | { | 
|  | bond_arp_send_all(bond, slave); | 
|  | #if IS_ENABLED(CONFIG_IPV6) | 
|  | bond_ns_send_all(bond, slave); | 
|  | #endif | 
|  | } | 
|  |  | 
|  | /* function to verify if we're in the arp_interval timeslice, returns true if | 
|  | * (last_act - arp_interval) <= jiffies <= (last_act + mod * arp_interval + | 
|  | * arp_interval/2) . the arp_interval/2 is needed for really fast networks. | 
|  | */ | 
|  | static bool bond_time_in_interval(struct bonding *bond, unsigned long last_act, | 
|  | int mod) | 
|  | { | 
|  | int delta_in_ticks = msecs_to_jiffies(bond->params.arp_interval); | 
|  |  | 
|  | return time_in_range(jiffies, | 
|  | last_act - delta_in_ticks, | 
|  | last_act + mod * delta_in_ticks + delta_in_ticks/2); | 
|  | } | 
|  |  | 
|  | /* This function is called regularly to monitor each slave's link | 
|  | * ensuring that traffic is being sent and received when arp monitoring | 
|  | * is used in load-balancing mode. if the adapter has been dormant, then an | 
|  | * arp is transmitted to generate traffic. see activebackup_arp_monitor for | 
|  | * arp monitoring in active backup mode. | 
|  | */ | 
|  | static void bond_loadbalance_arp_mon(struct bonding *bond) | 
|  | { | 
|  | struct slave *slave, *oldcurrent; | 
|  | struct list_head *iter; | 
|  | int do_failover = 0, slave_state_changed = 0; | 
|  |  | 
|  | if (!bond_has_slaves(bond)) | 
|  | goto re_arm; | 
|  |  | 
|  | rcu_read_lock(); | 
|  |  | 
|  | oldcurrent = rcu_dereference(bond->curr_active_slave); | 
|  | /* see if any of the previous devices are up now (i.e. they have | 
|  | * xmt and rcv traffic). the curr_active_slave does not come into | 
|  | * the picture unless it is null. also, slave->last_link_up is not | 
|  | * needed here because we send an arp on each slave and give a slave | 
|  | * as long as it needs to get the tx/rx within the delta. | 
|  | * TODO: what about up/down delay in arp mode? it wasn't here before | 
|  | *       so it can wait | 
|  | */ | 
|  | bond_for_each_slave_rcu(bond, slave, iter) { | 
|  | unsigned long last_tx = slave_last_tx(slave); | 
|  |  | 
|  | bond_propose_link_state(slave, BOND_LINK_NOCHANGE); | 
|  |  | 
|  | if (slave->link != BOND_LINK_UP) { | 
|  | if (bond_time_in_interval(bond, last_tx, 1) && | 
|  | bond_time_in_interval(bond, slave->last_rx, 1)) { | 
|  |  | 
|  | bond_propose_link_state(slave, BOND_LINK_UP); | 
|  | slave_state_changed = 1; | 
|  |  | 
|  | /* primary_slave has no meaning in round-robin | 
|  | * mode. the window of a slave being up and | 
|  | * curr_active_slave being null after enslaving | 
|  | * is closed. | 
|  | */ | 
|  | if (!oldcurrent) { | 
|  | slave_info(bond->dev, slave->dev, "link status definitely up\n"); | 
|  | do_failover = 1; | 
|  | } else { | 
|  | slave_info(bond->dev, slave->dev, "interface is now up\n"); | 
|  | } | 
|  | } | 
|  | } else { | 
|  | /* slave->link == BOND_LINK_UP */ | 
|  |  | 
|  | /* not all switches will respond to an arp request | 
|  | * when the source ip is 0, so don't take the link down | 
|  | * if we don't know our ip yet | 
|  | */ | 
|  | if (!bond_time_in_interval(bond, last_tx, bond->params.missed_max) || | 
|  | !bond_time_in_interval(bond, slave->last_rx, bond->params.missed_max)) { | 
|  |  | 
|  | bond_propose_link_state(slave, BOND_LINK_DOWN); | 
|  | slave_state_changed = 1; | 
|  |  | 
|  | if (slave->link_failure_count < UINT_MAX) | 
|  | slave->link_failure_count++; | 
|  |  | 
|  | slave_info(bond->dev, slave->dev, "interface is now down\n"); | 
|  |  | 
|  | if (slave == oldcurrent) | 
|  | do_failover = 1; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* note: if switch is in round-robin mode, all links | 
|  | * must tx arp to ensure all links rx an arp - otherwise | 
|  | * links may oscillate or not come up at all; if switch is | 
|  | * in something like xor mode, there is nothing we can | 
|  | * do - all replies will be rx'ed on same link causing slaves | 
|  | * to be unstable during low/no traffic periods | 
|  | */ | 
|  | if (bond_slave_is_up(slave)) | 
|  | bond_send_validate(bond, slave); | 
|  | } | 
|  |  | 
|  | rcu_read_unlock(); | 
|  |  | 
|  | if (do_failover || slave_state_changed) { | 
|  | if (!rtnl_trylock()) | 
|  | goto re_arm; | 
|  |  | 
|  | bond_for_each_slave(bond, slave, iter) { | 
|  | if (slave->link_new_state != BOND_LINK_NOCHANGE) | 
|  | slave->link = slave->link_new_state; | 
|  | } | 
|  |  | 
|  | if (slave_state_changed) { | 
|  | bond_slave_state_change(bond); | 
|  | if (BOND_MODE(bond) == BOND_MODE_XOR) | 
|  | bond_update_slave_arr(bond, NULL); | 
|  | } | 
|  | if (do_failover) { | 
|  | block_netpoll_tx(); | 
|  | bond_select_active_slave(bond); | 
|  | unblock_netpoll_tx(); | 
|  | } | 
|  | rtnl_unlock(); | 
|  | } | 
|  |  | 
|  | re_arm: | 
|  | if (bond->params.arp_interval) | 
|  | queue_delayed_work(bond->wq, &bond->arp_work, | 
|  | msecs_to_jiffies(bond->params.arp_interval)); | 
|  | } | 
|  |  | 
|  | /* Called to inspect slaves for active-backup mode ARP monitor link state | 
|  | * changes.  Sets proposed link state in slaves to specify what action | 
|  | * should take place for the slave.  Returns 0 if no changes are found, >0 | 
|  | * if changes to link states must be committed. | 
|  | * | 
|  | * Called with rcu_read_lock held. | 
|  | */ | 
|  | static int bond_ab_arp_inspect(struct bonding *bond) | 
|  | { | 
|  | unsigned long last_tx, last_rx; | 
|  | struct list_head *iter; | 
|  | struct slave *slave; | 
|  | int commit = 0; | 
|  |  | 
|  | bond_for_each_slave_rcu(bond, slave, iter) { | 
|  | bond_propose_link_state(slave, BOND_LINK_NOCHANGE); | 
|  | last_rx = slave_last_rx(bond, slave); | 
|  |  | 
|  | if (slave->link != BOND_LINK_UP) { | 
|  | if (bond_time_in_interval(bond, last_rx, 1)) { | 
|  | bond_propose_link_state(slave, BOND_LINK_UP); | 
|  | commit++; | 
|  | } else if (slave->link == BOND_LINK_BACK) { | 
|  | bond_propose_link_state(slave, BOND_LINK_FAIL); | 
|  | commit++; | 
|  | } | 
|  | continue; | 
|  | } | 
|  |  | 
|  | /* Give slaves 2*delta after being enslaved or made | 
|  | * active.  This avoids bouncing, as the last receive | 
|  | * times need a full ARP monitor cycle to be updated. | 
|  | */ | 
|  | if (bond_time_in_interval(bond, slave->last_link_up, 2)) | 
|  | continue; | 
|  |  | 
|  | /* Backup slave is down if: | 
|  | * - No current_arp_slave AND | 
|  | * - more than (missed_max+1)*delta since last receive AND | 
|  | * - the bond has an IP address | 
|  | * | 
|  | * Note: a non-null current_arp_slave indicates | 
|  | * the curr_active_slave went down and we are | 
|  | * searching for a new one; under this condition | 
|  | * we only take the curr_active_slave down - this | 
|  | * gives each slave a chance to tx/rx traffic | 
|  | * before being taken out | 
|  | */ | 
|  | if (!bond_is_active_slave(slave) && | 
|  | !rcu_access_pointer(bond->current_arp_slave) && | 
|  | !bond_time_in_interval(bond, last_rx, bond->params.missed_max + 1)) { | 
|  | bond_propose_link_state(slave, BOND_LINK_DOWN); | 
|  | commit++; | 
|  | } | 
|  |  | 
|  | /* Active slave is down if: | 
|  | * - more than missed_max*delta since transmitting OR | 
|  | * - (more than missed_max*delta since receive AND | 
|  | *    the bond has an IP address) | 
|  | */ | 
|  | last_tx = slave_last_tx(slave); | 
|  | if (bond_is_active_slave(slave) && | 
|  | (!bond_time_in_interval(bond, last_tx, bond->params.missed_max) || | 
|  | !bond_time_in_interval(bond, last_rx, bond->params.missed_max))) { | 
|  | bond_propose_link_state(slave, BOND_LINK_DOWN); | 
|  | commit++; | 
|  | } | 
|  | } | 
|  |  | 
|  | return commit; | 
|  | } | 
|  |  | 
|  | /* Called to commit link state changes noted by inspection step of | 
|  | * active-backup mode ARP monitor. | 
|  | * | 
|  | * Called with RTNL hold. | 
|  | */ | 
|  | static void bond_ab_arp_commit(struct bonding *bond) | 
|  | { | 
|  | bool do_failover = false; | 
|  | struct list_head *iter; | 
|  | unsigned long last_tx; | 
|  | struct slave *slave; | 
|  |  | 
|  | bond_for_each_slave(bond, slave, iter) { | 
|  | switch (slave->link_new_state) { | 
|  | case BOND_LINK_NOCHANGE: | 
|  | continue; | 
|  |  | 
|  | case BOND_LINK_UP: | 
|  | last_tx = slave_last_tx(slave); | 
|  | if (rtnl_dereference(bond->curr_active_slave) != slave || | 
|  | (!rtnl_dereference(bond->curr_active_slave) && | 
|  | bond_time_in_interval(bond, last_tx, 1))) { | 
|  | struct slave *current_arp_slave; | 
|  |  | 
|  | current_arp_slave = rtnl_dereference(bond->current_arp_slave); | 
|  | bond_set_slave_link_state(slave, BOND_LINK_UP, | 
|  | BOND_SLAVE_NOTIFY_NOW); | 
|  | if (current_arp_slave) { | 
|  | bond_set_slave_inactive_flags( | 
|  | current_arp_slave, | 
|  | BOND_SLAVE_NOTIFY_NOW); | 
|  | RCU_INIT_POINTER(bond->current_arp_slave, NULL); | 
|  | } | 
|  |  | 
|  | slave_info(bond->dev, slave->dev, "link status definitely up\n"); | 
|  |  | 
|  | if (!rtnl_dereference(bond->curr_active_slave) || | 
|  | slave == rtnl_dereference(bond->primary_slave) || | 
|  | slave->prio > rtnl_dereference(bond->curr_active_slave)->prio) | 
|  | do_failover = true; | 
|  |  | 
|  | } | 
|  |  | 
|  | continue; | 
|  |  | 
|  | case BOND_LINK_DOWN: | 
|  | if (slave->link_failure_count < UINT_MAX) | 
|  | slave->link_failure_count++; | 
|  |  | 
|  | bond_set_slave_link_state(slave, BOND_LINK_DOWN, | 
|  | BOND_SLAVE_NOTIFY_NOW); | 
|  | bond_set_slave_inactive_flags(slave, | 
|  | BOND_SLAVE_NOTIFY_NOW); | 
|  |  | 
|  | slave_info(bond->dev, slave->dev, "link status definitely down, disabling slave\n"); | 
|  |  | 
|  | if (slave == rtnl_dereference(bond->curr_active_slave)) { | 
|  | RCU_INIT_POINTER(bond->current_arp_slave, NULL); | 
|  | do_failover = true; | 
|  | } | 
|  |  | 
|  | continue; | 
|  |  | 
|  | case BOND_LINK_FAIL: | 
|  | bond_set_slave_link_state(slave, BOND_LINK_FAIL, | 
|  | BOND_SLAVE_NOTIFY_NOW); | 
|  | bond_set_slave_inactive_flags(slave, | 
|  | BOND_SLAVE_NOTIFY_NOW); | 
|  |  | 
|  | /* A slave has just been enslaved and has become | 
|  | * the current active slave. | 
|  | */ | 
|  | if (rtnl_dereference(bond->curr_active_slave)) | 
|  | RCU_INIT_POINTER(bond->current_arp_slave, NULL); | 
|  | continue; | 
|  |  | 
|  | default: | 
|  | slave_err(bond->dev, slave->dev, | 
|  | "impossible: link_new_state %d on slave\n", | 
|  | slave->link_new_state); | 
|  | continue; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (do_failover) { | 
|  | block_netpoll_tx(); | 
|  | bond_select_active_slave(bond); | 
|  | unblock_netpoll_tx(); | 
|  | } | 
|  |  | 
|  | bond_set_carrier(bond); | 
|  | } | 
|  |  | 
|  | /* Send ARP probes for active-backup mode ARP monitor. | 
|  | * | 
|  | * Called with rcu_read_lock held. | 
|  | */ | 
|  | static bool bond_ab_arp_probe(struct bonding *bond) | 
|  | { | 
|  | struct slave *slave, *before = NULL, *new_slave = NULL, | 
|  | *curr_arp_slave = rcu_dereference(bond->current_arp_slave), | 
|  | *curr_active_slave = rcu_dereference(bond->curr_active_slave); | 
|  | struct list_head *iter; | 
|  | bool found = false; | 
|  | bool should_notify_rtnl = BOND_SLAVE_NOTIFY_LATER; | 
|  |  | 
|  | if (curr_arp_slave && curr_active_slave) | 
|  | netdev_info(bond->dev, "PROBE: c_arp %s && cas %s BAD\n", | 
|  | curr_arp_slave->dev->name, | 
|  | curr_active_slave->dev->name); | 
|  |  | 
|  | if (curr_active_slave) { | 
|  | bond_send_validate(bond, curr_active_slave); | 
|  | return should_notify_rtnl; | 
|  | } | 
|  |  | 
|  | /* if we don't have a curr_active_slave, search for the next available | 
|  | * backup slave from the current_arp_slave and make it the candidate | 
|  | * for becoming the curr_active_slave | 
|  | */ | 
|  |  | 
|  | if (!curr_arp_slave) { | 
|  | curr_arp_slave = bond_first_slave_rcu(bond); | 
|  | if (!curr_arp_slave) | 
|  | return should_notify_rtnl; | 
|  | } | 
|  |  | 
|  | bond_for_each_slave_rcu(bond, slave, iter) { | 
|  | if (!found && !before && bond_slave_is_up(slave)) | 
|  | before = slave; | 
|  |  | 
|  | if (found && !new_slave && bond_slave_is_up(slave)) | 
|  | new_slave = slave; | 
|  | /* if the link state is up at this point, we | 
|  | * mark it down - this can happen if we have | 
|  | * simultaneous link failures and | 
|  | * reselect_active_interface doesn't make this | 
|  | * one the current slave so it is still marked | 
|  | * up when it is actually down | 
|  | */ | 
|  | if (!bond_slave_is_up(slave) && slave->link == BOND_LINK_UP) { | 
|  | bond_set_slave_link_state(slave, BOND_LINK_DOWN, | 
|  | BOND_SLAVE_NOTIFY_LATER); | 
|  | if (slave->link_failure_count < UINT_MAX) | 
|  | slave->link_failure_count++; | 
|  |  | 
|  | bond_set_slave_inactive_flags(slave, | 
|  | BOND_SLAVE_NOTIFY_LATER); | 
|  |  | 
|  | slave_info(bond->dev, slave->dev, "backup interface is now down\n"); | 
|  | } | 
|  | if (slave == curr_arp_slave) | 
|  | found = true; | 
|  | } | 
|  |  | 
|  | if (!new_slave && before) | 
|  | new_slave = before; | 
|  |  | 
|  | if (!new_slave) | 
|  | goto check_state; | 
|  |  | 
|  | bond_set_slave_link_state(new_slave, BOND_LINK_BACK, | 
|  | BOND_SLAVE_NOTIFY_LATER); | 
|  | bond_set_slave_active_flags(new_slave, BOND_SLAVE_NOTIFY_LATER); | 
|  | bond_send_validate(bond, new_slave); | 
|  | new_slave->last_link_up = jiffies; | 
|  | rcu_assign_pointer(bond->current_arp_slave, new_slave); | 
|  |  | 
|  | check_state: | 
|  | bond_for_each_slave_rcu(bond, slave, iter) { | 
|  | if (slave->should_notify || slave->should_notify_link) { | 
|  | should_notify_rtnl = BOND_SLAVE_NOTIFY_NOW; | 
|  | break; | 
|  | } | 
|  | } | 
|  | return should_notify_rtnl; | 
|  | } | 
|  |  | 
|  | static void bond_activebackup_arp_mon(struct bonding *bond) | 
|  | { | 
|  | bool should_notify_peers = false; | 
|  | bool should_notify_rtnl = false; | 
|  | int delta_in_ticks; | 
|  |  | 
|  | delta_in_ticks = msecs_to_jiffies(bond->params.arp_interval); | 
|  |  | 
|  | if (!bond_has_slaves(bond)) | 
|  | goto re_arm; | 
|  |  | 
|  | rcu_read_lock(); | 
|  |  | 
|  | should_notify_peers = bond_should_notify_peers(bond); | 
|  |  | 
|  | if (bond_ab_arp_inspect(bond)) { | 
|  | rcu_read_unlock(); | 
|  |  | 
|  | /* Race avoidance with bond_close flush of workqueue */ | 
|  | if (!rtnl_trylock()) { | 
|  | delta_in_ticks = 1; | 
|  | should_notify_peers = false; | 
|  | goto re_arm; | 
|  | } | 
|  |  | 
|  | bond_ab_arp_commit(bond); | 
|  |  | 
|  | rtnl_unlock(); | 
|  | rcu_read_lock(); | 
|  | } | 
|  |  | 
|  | should_notify_rtnl = bond_ab_arp_probe(bond); | 
|  | rcu_read_unlock(); | 
|  |  | 
|  | re_arm: | 
|  | if (bond->params.arp_interval) | 
|  | queue_delayed_work(bond->wq, &bond->arp_work, delta_in_ticks); | 
|  |  | 
|  | if (should_notify_peers || should_notify_rtnl) { | 
|  | if (!rtnl_trylock()) | 
|  | return; | 
|  |  | 
|  | if (should_notify_peers) { | 
|  | bond->send_peer_notif--; | 
|  | call_netdevice_notifiers(NETDEV_NOTIFY_PEERS, | 
|  | bond->dev); | 
|  | } | 
|  | if (should_notify_rtnl) { | 
|  | bond_slave_state_notify(bond); | 
|  | bond_slave_link_notify(bond); | 
|  | } | 
|  |  | 
|  | rtnl_unlock(); | 
|  | } | 
|  | } | 
|  |  | 
|  | static void bond_arp_monitor(struct work_struct *work) | 
|  | { | 
|  | struct bonding *bond = container_of(work, struct bonding, | 
|  | arp_work.work); | 
|  |  | 
|  | if (BOND_MODE(bond) == BOND_MODE_ACTIVEBACKUP) | 
|  | bond_activebackup_arp_mon(bond); | 
|  | else | 
|  | bond_loadbalance_arp_mon(bond); | 
|  | } | 
|  |  | 
|  | /*-------------------------- netdev event handling --------------------------*/ | 
|  |  | 
|  | /* Change device name */ | 
|  | static int bond_event_changename(struct bonding *bond) | 
|  | { | 
|  | bond_remove_proc_entry(bond); | 
|  | bond_create_proc_entry(bond); | 
|  |  | 
|  | bond_debug_reregister(bond); | 
|  |  | 
|  | return NOTIFY_DONE; | 
|  | } | 
|  |  | 
|  | static int bond_master_netdev_event(unsigned long event, | 
|  | struct net_device *bond_dev) | 
|  | { | 
|  | struct bonding *event_bond = netdev_priv(bond_dev); | 
|  |  | 
|  | netdev_dbg(bond_dev, "%s called\n", __func__); | 
|  |  | 
|  | switch (event) { | 
|  | case NETDEV_CHANGENAME: | 
|  | return bond_event_changename(event_bond); | 
|  | case NETDEV_UNREGISTER: | 
|  | bond_remove_proc_entry(event_bond); | 
|  | #ifdef CONFIG_XFRM_OFFLOAD | 
|  | xfrm_dev_state_flush(dev_net(bond_dev), bond_dev, true); | 
|  | #endif /* CONFIG_XFRM_OFFLOAD */ | 
|  | break; | 
|  | case NETDEV_REGISTER: | 
|  | bond_create_proc_entry(event_bond); | 
|  | break; | 
|  | default: | 
|  | break; | 
|  | } | 
|  |  | 
|  | return NOTIFY_DONE; | 
|  | } | 
|  |  | 
|  | static int bond_slave_netdev_event(unsigned long event, | 
|  | struct net_device *slave_dev) | 
|  | { | 
|  | struct slave *slave = bond_slave_get_rtnl(slave_dev), *primary; | 
|  | struct bonding *bond; | 
|  | struct net_device *bond_dev; | 
|  |  | 
|  | /* A netdev event can be generated while enslaving a device | 
|  | * before netdev_rx_handler_register is called in which case | 
|  | * slave will be NULL | 
|  | */ | 
|  | if (!slave) { | 
|  | netdev_dbg(slave_dev, "%s called on NULL slave\n", __func__); | 
|  | return NOTIFY_DONE; | 
|  | } | 
|  |  | 
|  | bond_dev = slave->bond->dev; | 
|  | bond = slave->bond; | 
|  | primary = rtnl_dereference(bond->primary_slave); | 
|  |  | 
|  | slave_dbg(bond_dev, slave_dev, "%s called\n", __func__); | 
|  |  | 
|  | switch (event) { | 
|  | case NETDEV_UNREGISTER: | 
|  | if (bond_dev->type != ARPHRD_ETHER) | 
|  | bond_release_and_destroy(bond_dev, slave_dev); | 
|  | else | 
|  | __bond_release_one(bond_dev, slave_dev, false, true); | 
|  | break; | 
|  | case NETDEV_UP: | 
|  | case NETDEV_CHANGE: | 
|  | /* For 802.3ad mode only: | 
|  | * Getting invalid Speed/Duplex values here will put slave | 
|  | * in weird state. Mark it as link-fail if the link was | 
|  | * previously up or link-down if it hasn't yet come up, and | 
|  | * let link-monitoring (miimon) set it right when correct | 
|  | * speeds/duplex are available. | 
|  | */ | 
|  | if (bond_update_speed_duplex(slave) && | 
|  | BOND_MODE(bond) == BOND_MODE_8023AD) { | 
|  | if (slave->last_link_up) | 
|  | slave->link = BOND_LINK_FAIL; | 
|  | else | 
|  | slave->link = BOND_LINK_DOWN; | 
|  | } | 
|  |  | 
|  | if (BOND_MODE(bond) == BOND_MODE_8023AD) | 
|  | bond_3ad_adapter_speed_duplex_changed(slave); | 
|  | fallthrough; | 
|  | case NETDEV_DOWN: | 
|  | /* Refresh slave-array if applicable! | 
|  | * If the setup does not use miimon or arpmon (mode-specific!), | 
|  | * then these events will not cause the slave-array to be | 
|  | * refreshed. This will cause xmit to use a slave that is not | 
|  | * usable. Avoid such situation by refeshing the array at these | 
|  | * events. If these (miimon/arpmon) parameters are configured | 
|  | * then array gets refreshed twice and that should be fine! | 
|  | */ | 
|  | if (bond_mode_can_use_xmit_hash(bond)) | 
|  | bond_update_slave_arr(bond, NULL); | 
|  | break; | 
|  | case NETDEV_CHANGEMTU: | 
|  | /* TODO: Should slaves be allowed to | 
|  | * independently alter their MTU?  For | 
|  | * an active-backup bond, slaves need | 
|  | * not be the same type of device, so | 
|  | * MTUs may vary.  For other modes, | 
|  | * slaves arguably should have the | 
|  | * same MTUs. To do this, we'd need to | 
|  | * take over the slave's change_mtu | 
|  | * function for the duration of their | 
|  | * servitude. | 
|  | */ | 
|  | break; | 
|  | case NETDEV_CHANGENAME: | 
|  | /* we don't care if we don't have primary set */ | 
|  | if (!bond_uses_primary(bond) || | 
|  | !bond->params.primary[0]) | 
|  | break; | 
|  |  | 
|  | if (slave == primary) { | 
|  | /* slave's name changed - he's no longer primary */ | 
|  | RCU_INIT_POINTER(bond->primary_slave, NULL); | 
|  | } else if (!strcmp(slave_dev->name, bond->params.primary)) { | 
|  | /* we have a new primary slave */ | 
|  | rcu_assign_pointer(bond->primary_slave, slave); | 
|  | } else { /* we didn't change primary - exit */ | 
|  | break; | 
|  | } | 
|  |  | 
|  | netdev_info(bond->dev, "Primary slave changed to %s, reselecting active slave\n", | 
|  | primary ? slave_dev->name : "none"); | 
|  |  | 
|  | block_netpoll_tx(); | 
|  | bond_select_active_slave(bond); | 
|  | unblock_netpoll_tx(); | 
|  | break; | 
|  | case NETDEV_FEAT_CHANGE: | 
|  | if (!bond->notifier_ctx) { | 
|  | bond->notifier_ctx = true; | 
|  | bond_compute_features(bond); | 
|  | bond->notifier_ctx = false; | 
|  | } | 
|  | break; | 
|  | case NETDEV_RESEND_IGMP: | 
|  | /* Propagate to master device */ | 
|  | call_netdevice_notifiers(event, slave->bond->dev); | 
|  | break; | 
|  | case NETDEV_XDP_FEAT_CHANGE: | 
|  | bond_xdp_set_features(bond_dev); | 
|  | break; | 
|  | default: | 
|  | break; | 
|  | } | 
|  |  | 
|  | return NOTIFY_DONE; | 
|  | } | 
|  |  | 
|  | /* bond_netdev_event: handle netdev notifier chain events. | 
|  | * | 
|  | * This function receives events for the netdev chain.  The caller (an | 
|  | * ioctl handler calling blocking_notifier_call_chain) holds the necessary | 
|  | * locks for us to safely manipulate the slave devices (RTNL lock, | 
|  | * dev_probe_lock). | 
|  | */ | 
|  | static int bond_netdev_event(struct notifier_block *this, | 
|  | unsigned long event, void *ptr) | 
|  | { | 
|  | struct net_device *event_dev = netdev_notifier_info_to_dev(ptr); | 
|  |  | 
|  | netdev_dbg(event_dev, "%s received %s\n", | 
|  | __func__, netdev_cmd_to_name(event)); | 
|  |  | 
|  | if (!(event_dev->priv_flags & IFF_BONDING)) | 
|  | return NOTIFY_DONE; | 
|  |  | 
|  | if (event_dev->flags & IFF_MASTER) { | 
|  | int ret; | 
|  |  | 
|  | ret = bond_master_netdev_event(event, event_dev); | 
|  | if (ret != NOTIFY_DONE) | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | if (event_dev->flags & IFF_SLAVE) | 
|  | return bond_slave_netdev_event(event, event_dev); | 
|  |  | 
|  | return NOTIFY_DONE; | 
|  | } | 
|  |  | 
|  | static struct notifier_block bond_netdev_notifier = { | 
|  | .notifier_call = bond_netdev_event, | 
|  | }; | 
|  |  | 
|  | /*---------------------------- Hashing Policies -----------------------------*/ | 
|  |  | 
|  | /* Helper to access data in a packet, with or without a backing skb. | 
|  | * If skb is given the data is linearized if necessary via pskb_may_pull. | 
|  | */ | 
|  | static inline const void *bond_pull_data(struct sk_buff *skb, | 
|  | const void *data, int hlen, int n) | 
|  | { | 
|  | if (likely(n <= hlen)) | 
|  | return data; | 
|  | else if (skb && likely(pskb_may_pull(skb, n))) | 
|  | return skb->data; | 
|  |  | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | /* L2 hash helper */ | 
|  | static inline u32 bond_eth_hash(struct sk_buff *skb, const void *data, int mhoff, int hlen) | 
|  | { | 
|  | struct ethhdr *ep; | 
|  |  | 
|  | data = bond_pull_data(skb, data, hlen, mhoff + sizeof(struct ethhdr)); | 
|  | if (!data) | 
|  | return 0; | 
|  |  | 
|  | ep = (struct ethhdr *)(data + mhoff); | 
|  | return ep->h_dest[5] ^ ep->h_source[5] ^ be16_to_cpu(ep->h_proto); | 
|  | } | 
|  |  | 
|  | static bool bond_flow_ip(struct sk_buff *skb, struct flow_keys *fk, const void *data, | 
|  | int hlen, __be16 l2_proto, int *nhoff, int *ip_proto, bool l34) | 
|  | { | 
|  | const struct ipv6hdr *iph6; | 
|  | const struct iphdr *iph; | 
|  |  | 
|  | if (l2_proto == htons(ETH_P_IP)) { | 
|  | data = bond_pull_data(skb, data, hlen, *nhoff + sizeof(*iph)); | 
|  | if (!data) | 
|  | return false; | 
|  |  | 
|  | iph = (const struct iphdr *)(data + *nhoff); | 
|  | iph_to_flow_copy_v4addrs(fk, iph); | 
|  | *nhoff += iph->ihl << 2; | 
|  | if (!ip_is_fragment(iph)) | 
|  | *ip_proto = iph->protocol; | 
|  | } else if (l2_proto == htons(ETH_P_IPV6)) { | 
|  | data = bond_pull_data(skb, data, hlen, *nhoff + sizeof(*iph6)); | 
|  | if (!data) | 
|  | return false; | 
|  |  | 
|  | iph6 = (const struct ipv6hdr *)(data + *nhoff); | 
|  | iph_to_flow_copy_v6addrs(fk, iph6); | 
|  | *nhoff += sizeof(*iph6); | 
|  | *ip_proto = iph6->nexthdr; | 
|  | } else { | 
|  | return false; | 
|  | } | 
|  |  | 
|  | if (l34 && *ip_proto >= 0) | 
|  | fk->ports.ports = __skb_flow_get_ports(skb, *nhoff, *ip_proto, data, hlen); | 
|  |  | 
|  | return true; | 
|  | } | 
|  |  | 
|  | static u32 bond_vlan_srcmac_hash(struct sk_buff *skb, const void *data, int mhoff, int hlen) | 
|  | { | 
|  | u32 srcmac_vendor = 0, srcmac_dev = 0; | 
|  | struct ethhdr *mac_hdr; | 
|  | u16 vlan = 0; | 
|  | int i; | 
|  |  | 
|  | data = bond_pull_data(skb, data, hlen, mhoff + sizeof(struct ethhdr)); | 
|  | if (!data) | 
|  | return 0; | 
|  | mac_hdr = (struct ethhdr *)(data + mhoff); | 
|  |  | 
|  | for (i = 0; i < 3; i++) | 
|  | srcmac_vendor = (srcmac_vendor << 8) | mac_hdr->h_source[i]; | 
|  |  | 
|  | for (i = 3; i < ETH_ALEN; i++) | 
|  | srcmac_dev = (srcmac_dev << 8) | mac_hdr->h_source[i]; | 
|  |  | 
|  | if (skb && skb_vlan_tag_present(skb)) | 
|  | vlan = skb_vlan_tag_get(skb); | 
|  |  | 
|  | return vlan ^ srcmac_vendor ^ srcmac_dev; | 
|  | } | 
|  |  | 
|  | /* Extract the appropriate headers based on bond's xmit policy */ | 
|  | static bool bond_flow_dissect(struct bonding *bond, struct sk_buff *skb, const void *data, | 
|  | __be16 l2_proto, int nhoff, int hlen, struct flow_keys *fk) | 
|  | { | 
|  | bool l34 = bond->params.xmit_policy == BOND_XMIT_POLICY_LAYER34; | 
|  | int ip_proto = -1; | 
|  |  | 
|  | switch (bond->params.xmit_policy) { | 
|  | case BOND_XMIT_POLICY_ENCAP23: | 
|  | case BOND_XMIT_POLICY_ENCAP34: | 
|  | memset(fk, 0, sizeof(*fk)); | 
|  | return __skb_flow_dissect(NULL, skb, &flow_keys_bonding, | 
|  | fk, data, l2_proto, nhoff, hlen, 0); | 
|  | default: | 
|  | break; | 
|  | } | 
|  |  | 
|  | fk->ports.ports = 0; | 
|  | memset(&fk->icmp, 0, sizeof(fk->icmp)); | 
|  | if (!bond_flow_ip(skb, fk, data, hlen, l2_proto, &nhoff, &ip_proto, l34)) | 
|  | return false; | 
|  |  | 
|  | /* ICMP error packets contains at least 8 bytes of the header | 
|  | * of the packet which generated the error. Use this information | 
|  | * to correlate ICMP error packets within the same flow which | 
|  | * generated the error. | 
|  | */ | 
|  | if (ip_proto == IPPROTO_ICMP || ip_proto == IPPROTO_ICMPV6) { | 
|  | skb_flow_get_icmp_tci(skb, &fk->icmp, data, nhoff, hlen); | 
|  | if (ip_proto == IPPROTO_ICMP) { | 
|  | if (!icmp_is_err(fk->icmp.type)) | 
|  | return true; | 
|  |  | 
|  | nhoff += sizeof(struct icmphdr); | 
|  | } else if (ip_proto == IPPROTO_ICMPV6) { | 
|  | if (!icmpv6_is_err(fk->icmp.type)) | 
|  | return true; | 
|  |  | 
|  | nhoff += sizeof(struct icmp6hdr); | 
|  | } | 
|  | return bond_flow_ip(skb, fk, data, hlen, l2_proto, &nhoff, &ip_proto, l34); | 
|  | } | 
|  |  | 
|  | return true; | 
|  | } | 
|  |  | 
|  | static u32 bond_ip_hash(u32 hash, struct flow_keys *flow, int xmit_policy) | 
|  | { | 
|  | hash ^= (__force u32)flow_get_u32_dst(flow) ^ | 
|  | (__force u32)flow_get_u32_src(flow); | 
|  | hash ^= (hash >> 16); | 
|  | hash ^= (hash >> 8); | 
|  |  | 
|  | /* discard lowest hash bit to deal with the common even ports pattern */ | 
|  | if (xmit_policy == BOND_XMIT_POLICY_LAYER34 || | 
|  | xmit_policy == BOND_XMIT_POLICY_ENCAP34) | 
|  | return hash >> 1; | 
|  |  | 
|  | return hash; | 
|  | } | 
|  |  | 
|  | /* Generate hash based on xmit policy. If @skb is given it is used to linearize | 
|  | * the data as required, but this function can be used without it if the data is | 
|  | * known to be linear (e.g. with xdp_buff). | 
|  | */ | 
|  | static u32 __bond_xmit_hash(struct bonding *bond, struct sk_buff *skb, const void *data, | 
|  | __be16 l2_proto, int mhoff, int nhoff, int hlen) | 
|  | { | 
|  | struct flow_keys flow; | 
|  | u32 hash; | 
|  |  | 
|  | if (bond->params.xmit_policy == BOND_XMIT_POLICY_VLAN_SRCMAC) | 
|  | return bond_vlan_srcmac_hash(skb, data, mhoff, hlen); | 
|  |  | 
|  | if (bond->params.xmit_policy == BOND_XMIT_POLICY_LAYER2 || | 
|  | !bond_flow_dissect(bond, skb, data, l2_proto, nhoff, hlen, &flow)) | 
|  | return bond_eth_hash(skb, data, mhoff, hlen); | 
|  |  | 
|  | if (bond->params.xmit_policy == BOND_XMIT_POLICY_LAYER23 || | 
|  | bond->params.xmit_policy == BOND_XMIT_POLICY_ENCAP23) { | 
|  | hash = bond_eth_hash(skb, data, mhoff, hlen); | 
|  | } else { | 
|  | if (flow.icmp.id) | 
|  | memcpy(&hash, &flow.icmp, sizeof(hash)); | 
|  | else | 
|  | memcpy(&hash, &flow.ports.ports, sizeof(hash)); | 
|  | } | 
|  |  | 
|  | return bond_ip_hash(hash, &flow, bond->params.xmit_policy); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * bond_xmit_hash - generate a hash value based on the xmit policy | 
|  | * @bond: bonding device | 
|  | * @skb: buffer to use for headers | 
|  | * | 
|  | * This function will extract the necessary headers from the skb buffer and use | 
|  | * them to generate a hash based on the xmit_policy set in the bonding device | 
|  | */ | 
|  | u32 bond_xmit_hash(struct bonding *bond, struct sk_buff *skb) | 
|  | { | 
|  | if (bond->params.xmit_policy == BOND_XMIT_POLICY_ENCAP34 && | 
|  | skb->l4_hash) | 
|  | return skb->hash; | 
|  |  | 
|  | return __bond_xmit_hash(bond, skb, skb->data, skb->protocol, | 
|  | 0, skb_network_offset(skb), | 
|  | skb_headlen(skb)); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * bond_xmit_hash_xdp - generate a hash value based on the xmit policy | 
|  | * @bond: bonding device | 
|  | * @xdp: buffer to use for headers | 
|  | * | 
|  | * The XDP variant of bond_xmit_hash. | 
|  | */ | 
|  | static u32 bond_xmit_hash_xdp(struct bonding *bond, struct xdp_buff *xdp) | 
|  | { | 
|  | struct ethhdr *eth; | 
|  |  | 
|  | if (xdp->data + sizeof(struct ethhdr) > xdp->data_end) | 
|  | return 0; | 
|  |  | 
|  | eth = (struct ethhdr *)xdp->data; | 
|  |  | 
|  | return __bond_xmit_hash(bond, NULL, xdp->data, eth->h_proto, 0, | 
|  | sizeof(struct ethhdr), xdp->data_end - xdp->data); | 
|  | } | 
|  |  | 
|  | /*-------------------------- Device entry points ----------------------------*/ | 
|  |  | 
|  | void bond_work_init_all(struct bonding *bond) | 
|  | { | 
|  | INIT_DELAYED_WORK(&bond->mcast_work, | 
|  | bond_resend_igmp_join_requests_delayed); | 
|  | INIT_DELAYED_WORK(&bond->alb_work, bond_alb_monitor); | 
|  | INIT_DELAYED_WORK(&bond->mii_work, bond_mii_monitor); | 
|  | INIT_DELAYED_WORK(&bond->arp_work, bond_arp_monitor); | 
|  | INIT_DELAYED_WORK(&bond->ad_work, bond_3ad_state_machine_handler); | 
|  | INIT_DELAYED_WORK(&bond->slave_arr_work, bond_slave_arr_handler); | 
|  | } | 
|  |  | 
|  | static void bond_work_cancel_all(struct bonding *bond) | 
|  | { | 
|  | cancel_delayed_work_sync(&bond->mii_work); | 
|  | cancel_delayed_work_sync(&bond->arp_work); | 
|  | cancel_delayed_work_sync(&bond->alb_work); | 
|  | cancel_delayed_work_sync(&bond->ad_work); | 
|  | cancel_delayed_work_sync(&bond->mcast_work); | 
|  | cancel_delayed_work_sync(&bond->slave_arr_work); | 
|  | } | 
|  |  | 
|  | static int bond_open(struct net_device *bond_dev) | 
|  | { | 
|  | struct bonding *bond = netdev_priv(bond_dev); | 
|  | struct list_head *iter; | 
|  | struct slave *slave; | 
|  |  | 
|  | if (BOND_MODE(bond) == BOND_MODE_ROUNDROBIN && !bond->rr_tx_counter) { | 
|  | bond->rr_tx_counter = alloc_percpu(u32); | 
|  | if (!bond->rr_tx_counter) | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | /* reset slave->backup and slave->inactive */ | 
|  | if (bond_has_slaves(bond)) { | 
|  | bond_for_each_slave(bond, slave, iter) { | 
|  | if (bond_uses_primary(bond) && | 
|  | slave != rcu_access_pointer(bond->curr_active_slave)) { | 
|  | bond_set_slave_inactive_flags(slave, | 
|  | BOND_SLAVE_NOTIFY_NOW); | 
|  | } else if (BOND_MODE(bond) != BOND_MODE_8023AD) { | 
|  | bond_set_slave_active_flags(slave, | 
|  | BOND_SLAVE_NOTIFY_NOW); | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | if (bond_is_lb(bond)) { | 
|  | /* bond_alb_initialize must be called before the timer | 
|  | * is started. | 
|  | */ | 
|  | if (bond_alb_initialize(bond, (BOND_MODE(bond) == BOND_MODE_ALB))) | 
|  | return -ENOMEM; | 
|  | if (bond->params.tlb_dynamic_lb || BOND_MODE(bond) == BOND_MODE_ALB) | 
|  | queue_delayed_work(bond->wq, &bond->alb_work, 0); | 
|  | } | 
|  |  | 
|  | if (bond->params.miimon)  /* link check interval, in milliseconds. */ | 
|  | queue_delayed_work(bond->wq, &bond->mii_work, 0); | 
|  |  | 
|  | if (bond->params.arp_interval) {  /* arp interval, in milliseconds. */ | 
|  | queue_delayed_work(bond->wq, &bond->arp_work, 0); | 
|  | bond->recv_probe = bond_rcv_validate; | 
|  | } | 
|  |  | 
|  | if (BOND_MODE(bond) == BOND_MODE_8023AD) { | 
|  | queue_delayed_work(bond->wq, &bond->ad_work, 0); | 
|  | /* register to receive LACPDUs */ | 
|  | bond->recv_probe = bond_3ad_lacpdu_recv; | 
|  | bond_3ad_initiate_agg_selection(bond, 1); | 
|  |  | 
|  | bond_for_each_slave(bond, slave, iter) | 
|  | dev_mc_add(slave->dev, lacpdu_mcast_addr); | 
|  | } | 
|  |  | 
|  | if (bond_mode_can_use_xmit_hash(bond)) | 
|  | bond_update_slave_arr(bond, NULL); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int bond_close(struct net_device *bond_dev) | 
|  | { | 
|  | struct bonding *bond = netdev_priv(bond_dev); | 
|  | struct slave *slave; | 
|  |  | 
|  | bond_work_cancel_all(bond); | 
|  | bond->send_peer_notif = 0; | 
|  | if (bond_is_lb(bond)) | 
|  | bond_alb_deinitialize(bond); | 
|  | bond->recv_probe = NULL; | 
|  |  | 
|  | if (bond_uses_primary(bond)) { | 
|  | rcu_read_lock(); | 
|  | slave = rcu_dereference(bond->curr_active_slave); | 
|  | if (slave) | 
|  | bond_hw_addr_flush(bond_dev, slave->dev); | 
|  | rcu_read_unlock(); | 
|  | } else { | 
|  | struct list_head *iter; | 
|  |  | 
|  | bond_for_each_slave(bond, slave, iter) | 
|  | bond_hw_addr_flush(bond_dev, slave->dev); | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* fold stats, assuming all rtnl_link_stats64 fields are u64, but | 
|  | * that some drivers can provide 32bit values only. | 
|  | */ | 
|  | static void bond_fold_stats(struct rtnl_link_stats64 *_res, | 
|  | const struct rtnl_link_stats64 *_new, | 
|  | const struct rtnl_link_stats64 *_old) | 
|  | { | 
|  | const u64 *new = (const u64 *)_new; | 
|  | const u64 *old = (const u64 *)_old; | 
|  | u64 *res = (u64 *)_res; | 
|  | int i; | 
|  |  | 
|  | for (i = 0; i < sizeof(*_res) / sizeof(u64); i++) { | 
|  | u64 nv = new[i]; | 
|  | u64 ov = old[i]; | 
|  | s64 delta = nv - ov; | 
|  |  | 
|  | /* detects if this particular field is 32bit only */ | 
|  | if (((nv | ov) >> 32) == 0) | 
|  | delta = (s64)(s32)((u32)nv - (u32)ov); | 
|  |  | 
|  | /* filter anomalies, some drivers reset their stats | 
|  | * at down/up events. | 
|  | */ | 
|  | if (delta > 0) | 
|  | res[i] += delta; | 
|  | } | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_LOCKDEP | 
|  | static int bond_get_lowest_level_rcu(struct net_device *dev) | 
|  | { | 
|  | struct net_device *ldev, *next, *now, *dev_stack[MAX_NEST_DEV + 1]; | 
|  | struct list_head *niter, *iter, *iter_stack[MAX_NEST_DEV + 1]; | 
|  | int cur = 0, max = 0; | 
|  |  | 
|  | now = dev; | 
|  | iter = &dev->adj_list.lower; | 
|  |  | 
|  | while (1) { | 
|  | next = NULL; | 
|  | while (1) { | 
|  | ldev = netdev_next_lower_dev_rcu(now, &iter); | 
|  | if (!ldev) | 
|  | break; | 
|  |  | 
|  | next = ldev; | 
|  | niter = &ldev->adj_list.lower; | 
|  | dev_stack[cur] = now; | 
|  | iter_stack[cur++] = iter; | 
|  | if (max <= cur) | 
|  | max = cur; | 
|  | break; | 
|  | } | 
|  |  | 
|  | if (!next) { | 
|  | if (!cur) | 
|  | return max; | 
|  | next = dev_stack[--cur]; | 
|  | niter = iter_stack[cur]; | 
|  | } | 
|  |  | 
|  | now = next; | 
|  | iter = niter; | 
|  | } | 
|  |  | 
|  | return max; | 
|  | } | 
|  | #endif | 
|  |  | 
|  | static void bond_get_stats(struct net_device *bond_dev, | 
|  | struct rtnl_link_stats64 *stats) | 
|  | { | 
|  | struct bonding *bond = netdev_priv(bond_dev); | 
|  | struct rtnl_link_stats64 temp; | 
|  | struct list_head *iter; | 
|  | struct slave *slave; | 
|  | int nest_level = 0; | 
|  |  | 
|  |  | 
|  | rcu_read_lock(); | 
|  | #ifdef CONFIG_LOCKDEP | 
|  | nest_level = bond_get_lowest_level_rcu(bond_dev); | 
|  | #endif | 
|  |  | 
|  | spin_lock_nested(&bond->stats_lock, nest_level); | 
|  | memcpy(stats, &bond->bond_stats, sizeof(*stats)); | 
|  |  | 
|  | bond_for_each_slave_rcu(bond, slave, iter) { | 
|  | const struct rtnl_link_stats64 *new = | 
|  | dev_get_stats(slave->dev, &temp); | 
|  |  | 
|  | bond_fold_stats(stats, new, &slave->slave_stats); | 
|  |  | 
|  | /* save off the slave stats for the next run */ | 
|  | memcpy(&slave->slave_stats, new, sizeof(*new)); | 
|  | } | 
|  |  | 
|  | memcpy(&bond->bond_stats, stats, sizeof(*stats)); | 
|  | spin_unlock(&bond->stats_lock); | 
|  | rcu_read_unlock(); | 
|  | } | 
|  |  | 
|  | static int bond_eth_ioctl(struct net_device *bond_dev, struct ifreq *ifr, int cmd) | 
|  | { | 
|  | struct bonding *bond = netdev_priv(bond_dev); | 
|  | struct mii_ioctl_data *mii = NULL; | 
|  |  | 
|  | netdev_dbg(bond_dev, "bond_eth_ioctl: cmd=%d\n", cmd); | 
|  |  | 
|  | switch (cmd) { | 
|  | case SIOCGMIIPHY: | 
|  | mii = if_mii(ifr); | 
|  | if (!mii) | 
|  | return -EINVAL; | 
|  |  | 
|  | mii->phy_id = 0; | 
|  | fallthrough; | 
|  | case SIOCGMIIREG: | 
|  | /* We do this again just in case we were called by SIOCGMIIREG | 
|  | * instead of SIOCGMIIPHY. | 
|  | */ | 
|  | mii = if_mii(ifr); | 
|  | if (!mii) | 
|  | return -EINVAL; | 
|  |  | 
|  | if (mii->reg_num == 1) { | 
|  | mii->val_out = 0; | 
|  | if (netif_carrier_ok(bond->dev)) | 
|  | mii->val_out = BMSR_LSTATUS; | 
|  | } | 
|  |  | 
|  | break; | 
|  | default: | 
|  | return -EOPNOTSUPP; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int bond_do_ioctl(struct net_device *bond_dev, struct ifreq *ifr, int cmd) | 
|  | { | 
|  | struct bonding *bond = netdev_priv(bond_dev); | 
|  | struct net_device *slave_dev = NULL; | 
|  | struct ifbond k_binfo; | 
|  | struct ifbond __user *u_binfo = NULL; | 
|  | struct ifslave k_sinfo; | 
|  | struct ifslave __user *u_sinfo = NULL; | 
|  | struct bond_opt_value newval; | 
|  | struct net *net; | 
|  | int res = 0; | 
|  |  | 
|  | netdev_dbg(bond_dev, "bond_ioctl: cmd=%d\n", cmd); | 
|  |  | 
|  | switch (cmd) { | 
|  | case SIOCBONDINFOQUERY: | 
|  | u_binfo = (struct ifbond __user *)ifr->ifr_data; | 
|  |  | 
|  | if (copy_from_user(&k_binfo, u_binfo, sizeof(ifbond))) | 
|  | return -EFAULT; | 
|  |  | 
|  | bond_info_query(bond_dev, &k_binfo); | 
|  | if (copy_to_user(u_binfo, &k_binfo, sizeof(ifbond))) | 
|  | return -EFAULT; | 
|  |  | 
|  | return 0; | 
|  | case SIOCBONDSLAVEINFOQUERY: | 
|  | u_sinfo = (struct ifslave __user *)ifr->ifr_data; | 
|  |  | 
|  | if (copy_from_user(&k_sinfo, u_sinfo, sizeof(ifslave))) | 
|  | return -EFAULT; | 
|  |  | 
|  | res = bond_slave_info_query(bond_dev, &k_sinfo); | 
|  | if (res == 0 && | 
|  | copy_to_user(u_sinfo, &k_sinfo, sizeof(ifslave))) | 
|  | return -EFAULT; | 
|  |  | 
|  | return res; | 
|  | default: | 
|  | break; | 
|  | } | 
|  |  | 
|  | net = dev_net(bond_dev); | 
|  |  | 
|  | if (!ns_capable(net->user_ns, CAP_NET_ADMIN)) | 
|  | return -EPERM; | 
|  |  | 
|  | slave_dev = __dev_get_by_name(net, ifr->ifr_slave); | 
|  |  | 
|  | slave_dbg(bond_dev, slave_dev, "slave_dev=%p:\n", slave_dev); | 
|  |  | 
|  | if (!slave_dev) | 
|  | return -ENODEV; | 
|  |  | 
|  | switch (cmd) { | 
|  | case SIOCBONDENSLAVE: | 
|  | res = bond_enslave(bond_dev, slave_dev, NULL); | 
|  | break; | 
|  | case SIOCBONDRELEASE: | 
|  | res = bond_release(bond_dev, slave_dev); | 
|  | break; | 
|  | case SIOCBONDSETHWADDR: | 
|  | res = bond_set_dev_addr(bond_dev, slave_dev); | 
|  | break; | 
|  | case SIOCBONDCHANGEACTIVE: | 
|  | bond_opt_initstr(&newval, slave_dev->name); | 
|  | res = __bond_opt_set_notify(bond, BOND_OPT_ACTIVE_SLAVE, | 
|  | &newval); | 
|  | break; | 
|  | default: | 
|  | res = -EOPNOTSUPP; | 
|  | } | 
|  |  | 
|  | return res; | 
|  | } | 
|  |  | 
|  | static int bond_siocdevprivate(struct net_device *bond_dev, struct ifreq *ifr, | 
|  | void __user *data, int cmd) | 
|  | { | 
|  | struct ifreq ifrdata = { .ifr_data = data }; | 
|  |  | 
|  | switch (cmd) { | 
|  | case BOND_INFO_QUERY_OLD: | 
|  | return bond_do_ioctl(bond_dev, &ifrdata, SIOCBONDINFOQUERY); | 
|  | case BOND_SLAVE_INFO_QUERY_OLD: | 
|  | return bond_do_ioctl(bond_dev, &ifrdata, SIOCBONDSLAVEINFOQUERY); | 
|  | case BOND_ENSLAVE_OLD: | 
|  | return bond_do_ioctl(bond_dev, ifr, SIOCBONDENSLAVE); | 
|  | case BOND_RELEASE_OLD: | 
|  | return bond_do_ioctl(bond_dev, ifr, SIOCBONDRELEASE); | 
|  | case BOND_SETHWADDR_OLD: | 
|  | return bond_do_ioctl(bond_dev, ifr, SIOCBONDSETHWADDR); | 
|  | case BOND_CHANGE_ACTIVE_OLD: | 
|  | return bond_do_ioctl(bond_dev, ifr, SIOCBONDCHANGEACTIVE); | 
|  | } | 
|  |  | 
|  | return -EOPNOTSUPP; | 
|  | } | 
|  |  | 
|  | static void bond_change_rx_flags(struct net_device *bond_dev, int change) | 
|  | { | 
|  | struct bonding *bond = netdev_priv(bond_dev); | 
|  |  | 
|  | if (change & IFF_PROMISC) | 
|  | bond_set_promiscuity(bond, | 
|  | bond_dev->flags & IFF_PROMISC ? 1 : -1); | 
|  |  | 
|  | if (change & IFF_ALLMULTI) | 
|  | bond_set_allmulti(bond, | 
|  | bond_dev->flags & IFF_ALLMULTI ? 1 : -1); | 
|  | } | 
|  |  | 
|  | static void bond_set_rx_mode(struct net_device *bond_dev) | 
|  | { | 
|  | struct bonding *bond = netdev_priv(bond_dev); | 
|  | struct list_head *iter; | 
|  | struct slave *slave; | 
|  |  | 
|  | rcu_read_lock(); | 
|  | if (bond_uses_primary(bond)) { | 
|  | slave = rcu_dereference(bond->curr_active_slave); | 
|  | if (slave) { | 
|  | dev_uc_sync(slave->dev, bond_dev); | 
|  | dev_mc_sync(slave->dev, bond_dev); | 
|  | } | 
|  | } else { | 
|  | bond_for_each_slave_rcu(bond, slave, iter) { | 
|  | dev_uc_sync_multiple(slave->dev, bond_dev); | 
|  | dev_mc_sync_multiple(slave->dev, bond_dev); | 
|  | } | 
|  | } | 
|  | rcu_read_unlock(); | 
|  | } | 
|  |  | 
|  | static int bond_neigh_init(struct neighbour *n) | 
|  | { | 
|  | struct bonding *bond = netdev_priv(n->dev); | 
|  | const struct net_device_ops *slave_ops; | 
|  | struct neigh_parms parms; | 
|  | struct slave *slave; | 
|  | int ret = 0; | 
|  |  | 
|  | rcu_read_lock(); | 
|  | slave = bond_first_slave_rcu(bond); | 
|  | if (!slave) | 
|  | goto out; | 
|  | slave_ops = slave->dev->netdev_ops; | 
|  | if (!slave_ops->ndo_neigh_setup) | 
|  | goto out; | 
|  |  | 
|  | /* TODO: find another way [1] to implement this. | 
|  | * Passing a zeroed structure is fragile, | 
|  | * but at least we do not pass garbage. | 
|  | * | 
|  | * [1] One way would be that ndo_neigh_setup() never touch | 
|  | *     struct neigh_parms, but propagate the new neigh_setup() | 
|  | *     back to ___neigh_create() / neigh_parms_alloc() | 
|  | */ | 
|  | memset(&parms, 0, sizeof(parms)); | 
|  | ret = slave_ops->ndo_neigh_setup(slave->dev, &parms); | 
|  |  | 
|  | if (ret) | 
|  | goto out; | 
|  |  | 
|  | if (parms.neigh_setup) | 
|  | ret = parms.neigh_setup(n); | 
|  | out: | 
|  | rcu_read_unlock(); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* The bonding ndo_neigh_setup is called at init time beofre any | 
|  | * slave exists. So we must declare proxy setup function which will | 
|  | * be used at run time to resolve the actual slave neigh param setup. | 
|  | * | 
|  | * It's also called by master devices (such as vlans) to setup their | 
|  | * underlying devices. In that case - do nothing, we're already set up from | 
|  | * our init. | 
|  | */ | 
|  | static int bond_neigh_setup(struct net_device *dev, | 
|  | struct neigh_parms *parms) | 
|  | { | 
|  | /* modify only our neigh_parms */ | 
|  | if (parms->dev == dev) | 
|  | parms->neigh_setup = bond_neigh_init; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* Change the MTU of all of a master's slaves to match the master */ | 
|  | static int bond_change_mtu(struct net_device *bond_dev, int new_mtu) | 
|  | { | 
|  | struct bonding *bond = netdev_priv(bond_dev); | 
|  | struct slave *slave, *rollback_slave; | 
|  | struct list_head *iter; | 
|  | int res = 0; | 
|  |  | 
|  | netdev_dbg(bond_dev, "bond=%p, new_mtu=%d\n", bond, new_mtu); | 
|  |  | 
|  | bond_for_each_slave(bond, slave, iter) { | 
|  | slave_dbg(bond_dev, slave->dev, "s %p c_m %p\n", | 
|  | slave, slave->dev->netdev_ops->ndo_change_mtu); | 
|  |  | 
|  | res = dev_set_mtu(slave->dev, new_mtu); | 
|  |  | 
|  | if (res) { | 
|  | /* If we failed to set the slave's mtu to the new value | 
|  | * we must abort the operation even in ACTIVE_BACKUP | 
|  | * mode, because if we allow the backup slaves to have | 
|  | * different mtu values than the active slave we'll | 
|  | * need to change their mtu when doing a failover. That | 
|  | * means changing their mtu from timer context, which | 
|  | * is probably not a good idea. | 
|  | */ | 
|  | slave_dbg(bond_dev, slave->dev, "err %d setting mtu to %d\n", | 
|  | res, new_mtu); | 
|  | goto unwind; | 
|  | } | 
|  | } | 
|  |  | 
|  | bond_dev->mtu = new_mtu; | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | unwind: | 
|  | /* unwind from head to the slave that failed */ | 
|  | bond_for_each_slave(bond, rollback_slave, iter) { | 
|  | int tmp_res; | 
|  |  | 
|  | if (rollback_slave == slave) | 
|  | break; | 
|  |  | 
|  | tmp_res = dev_set_mtu(rollback_slave->dev, bond_dev->mtu); | 
|  | if (tmp_res) | 
|  | slave_dbg(bond_dev, rollback_slave->dev, "unwind err %d\n", | 
|  | tmp_res); | 
|  | } | 
|  |  | 
|  | return res; | 
|  | } | 
|  |  | 
|  | /* Change HW address | 
|  | * | 
|  | * Note that many devices must be down to change the HW address, and | 
|  | * downing the master releases all slaves.  We can make bonds full of | 
|  | * bonding devices to test this, however. | 
|  | */ | 
|  | static int bond_set_mac_address(struct net_device *bond_dev, void *addr) | 
|  | { | 
|  | struct bonding *bond = netdev_priv(bond_dev); | 
|  | struct slave *slave, *rollback_slave; | 
|  | struct sockaddr_storage *ss = addr, tmp_ss; | 
|  | struct list_head *iter; | 
|  | int res = 0; | 
|  |  | 
|  | if (BOND_MODE(bond) == BOND_MODE_ALB) | 
|  | return bond_alb_set_mac_address(bond_dev, addr); | 
|  |  | 
|  |  | 
|  | netdev_dbg(bond_dev, "%s: bond=%p\n", __func__, bond); | 
|  |  | 
|  | /* If fail_over_mac is enabled, do nothing and return success. | 
|  | * Returning an error causes ifenslave to fail. | 
|  | */ | 
|  | if (bond->params.fail_over_mac && | 
|  | BOND_MODE(bond) == BOND_MODE_ACTIVEBACKUP) | 
|  | return 0; | 
|  |  | 
|  | if (!is_valid_ether_addr(ss->__data)) | 
|  | return -EADDRNOTAVAIL; | 
|  |  | 
|  | bond_for_each_slave(bond, slave, iter) { | 
|  | slave_dbg(bond_dev, slave->dev, "%s: slave=%p\n", | 
|  | __func__, slave); | 
|  | res = dev_set_mac_address(slave->dev, addr, NULL); | 
|  | if (res) { | 
|  | /* TODO: consider downing the slave | 
|  | * and retry ? | 
|  | * User should expect communications | 
|  | * breakage anyway until ARP finish | 
|  | * updating, so... | 
|  | */ | 
|  | slave_dbg(bond_dev, slave->dev, "%s: err %d\n", | 
|  | __func__, res); | 
|  | goto unwind; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* success */ | 
|  | dev_addr_set(bond_dev, ss->__data); | 
|  | return 0; | 
|  |  | 
|  | unwind: | 
|  | memcpy(tmp_ss.__data, bond_dev->dev_addr, bond_dev->addr_len); | 
|  | tmp_ss.ss_family = bond_dev->type; | 
|  |  | 
|  | /* unwind from head to the slave that failed */ | 
|  | bond_for_each_slave(bond, rollback_slave, iter) { | 
|  | int tmp_res; | 
|  |  | 
|  | if (rollback_slave == slave) | 
|  | break; | 
|  |  | 
|  | tmp_res = dev_set_mac_address(rollback_slave->dev, | 
|  | (struct sockaddr *)&tmp_ss, NULL); | 
|  | if (tmp_res) { | 
|  | slave_dbg(bond_dev, rollback_slave->dev, "%s: unwind err %d\n", | 
|  | __func__, tmp_res); | 
|  | } | 
|  | } | 
|  |  | 
|  | return res; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * bond_get_slave_by_id - get xmit slave with slave_id | 
|  | * @bond: bonding device that is transmitting | 
|  | * @slave_id: slave id up to slave_cnt-1 through which to transmit | 
|  | * | 
|  | * This function tries to get slave with slave_id but in case | 
|  | * it fails, it tries to find the first available slave for transmission. | 
|  | */ | 
|  | static struct slave *bond_get_slave_by_id(struct bonding *bond, | 
|  | int slave_id) | 
|  | { | 
|  | struct list_head *iter; | 
|  | struct slave *slave; | 
|  | int i = slave_id; | 
|  |  | 
|  | /* Here we start from the slave with slave_id */ | 
|  | bond_for_each_slave_rcu(bond, slave, iter) { | 
|  | if (--i < 0) { | 
|  | if (bond_slave_can_tx(slave)) | 
|  | return slave; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* Here we start from the first slave up to slave_id */ | 
|  | i = slave_id; | 
|  | bond_for_each_slave_rcu(bond, slave, iter) { | 
|  | if (--i < 0) | 
|  | break; | 
|  | if (bond_slave_can_tx(slave)) | 
|  | return slave; | 
|  | } | 
|  | /* no slave that can tx has been found */ | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * bond_rr_gen_slave_id - generate slave id based on packets_per_slave | 
|  | * @bond: bonding device to use | 
|  | * | 
|  | * Based on the value of the bonding device's packets_per_slave parameter | 
|  | * this function generates a slave id, which is usually used as the next | 
|  | * slave to transmit through. | 
|  | */ | 
|  | static u32 bond_rr_gen_slave_id(struct bonding *bond) | 
|  | { | 
|  | u32 slave_id; | 
|  | struct reciprocal_value reciprocal_packets_per_slave; | 
|  | int packets_per_slave = bond->params.packets_per_slave; | 
|  |  | 
|  | switch (packets_per_slave) { | 
|  | case 0: | 
|  | slave_id = get_random_u32(); | 
|  | break; | 
|  | case 1: | 
|  | slave_id = this_cpu_inc_return(*bond->rr_tx_counter); | 
|  | break; | 
|  | default: | 
|  | reciprocal_packets_per_slave = | 
|  | bond->params.reciprocal_packets_per_slave; | 
|  | slave_id = this_cpu_inc_return(*bond->rr_tx_counter); | 
|  | slave_id = reciprocal_divide(slave_id, | 
|  | reciprocal_packets_per_slave); | 
|  | break; | 
|  | } | 
|  |  | 
|  | return slave_id; | 
|  | } | 
|  |  | 
|  | static struct slave *bond_xmit_roundrobin_slave_get(struct bonding *bond, | 
|  | struct sk_buff *skb) | 
|  | { | 
|  | struct slave *slave; | 
|  | int slave_cnt; | 
|  | u32 slave_id; | 
|  |  | 
|  | /* Start with the curr_active_slave that joined the bond as the | 
|  | * default for sending IGMP traffic.  For failover purposes one | 
|  | * needs to maintain some consistency for the interface that will | 
|  | * send the join/membership reports.  The curr_active_slave found | 
|  | * will send all of this type of traffic. | 
|  | */ | 
|  | if (skb->protocol == htons(ETH_P_IP)) { | 
|  | int noff = skb_network_offset(skb); | 
|  | struct iphdr *iph; | 
|  |  | 
|  | if (unlikely(!pskb_may_pull(skb, noff + sizeof(*iph)))) | 
|  | goto non_igmp; | 
|  |  | 
|  | iph = ip_hdr(skb); | 
|  | if (iph->protocol == IPPROTO_IGMP) { | 
|  | slave = rcu_dereference(bond->curr_active_slave); | 
|  | if (slave) | 
|  | return slave; | 
|  | return bond_get_slave_by_id(bond, 0); | 
|  | } | 
|  | } | 
|  |  | 
|  | non_igmp: | 
|  | slave_cnt = READ_ONCE(bond->slave_cnt); | 
|  | if (likely(slave_cnt)) { | 
|  | slave_id = bond_rr_gen_slave_id(bond) % slave_cnt; | 
|  | return bond_get_slave_by_id(bond, slave_id); | 
|  | } | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | static struct slave *bond_xdp_xmit_roundrobin_slave_get(struct bonding *bond, | 
|  | struct xdp_buff *xdp) | 
|  | { | 
|  | struct slave *slave; | 
|  | int slave_cnt; | 
|  | u32 slave_id; | 
|  | const struct ethhdr *eth; | 
|  | void *data = xdp->data; | 
|  |  | 
|  | if (data + sizeof(struct ethhdr) > xdp->data_end) | 
|  | goto non_igmp; | 
|  |  | 
|  | eth = (struct ethhdr *)data; | 
|  | data += sizeof(struct ethhdr); | 
|  |  | 
|  | /* See comment on IGMP in bond_xmit_roundrobin_slave_get() */ | 
|  | if (eth->h_proto == htons(ETH_P_IP)) { | 
|  | const struct iphdr *iph; | 
|  |  | 
|  | if (data + sizeof(struct iphdr) > xdp->data_end) | 
|  | goto non_igmp; | 
|  |  | 
|  | iph = (struct iphdr *)data; | 
|  |  | 
|  | if (iph->protocol == IPPROTO_IGMP) { | 
|  | slave = rcu_dereference(bond->curr_active_slave); | 
|  | if (slave) | 
|  | return slave; | 
|  | return bond_get_slave_by_id(bond, 0); | 
|  | } | 
|  | } | 
|  |  | 
|  | non_igmp: | 
|  | slave_cnt = READ_ONCE(bond->slave_cnt); | 
|  | if (likely(slave_cnt)) { | 
|  | slave_id = bond_rr_gen_slave_id(bond) % slave_cnt; | 
|  | return bond_get_slave_by_id(bond, slave_id); | 
|  | } | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | static netdev_tx_t bond_xmit_roundrobin(struct sk_buff *skb, | 
|  | struct net_device *bond_dev) | 
|  | { | 
|  | struct bonding *bond = netdev_priv(bond_dev); | 
|  | struct slave *slave; | 
|  |  | 
|  | slave = bond_xmit_roundrobin_slave_get(bond, skb); | 
|  | if (likely(slave)) | 
|  | return bond_dev_queue_xmit(bond, skb, slave->dev); | 
|  |  | 
|  | return bond_tx_drop(bond_dev, skb); | 
|  | } | 
|  |  | 
|  | static struct slave *bond_xmit_activebackup_slave_get(struct bonding *bond) | 
|  | { | 
|  | return rcu_dereference(bond->curr_active_slave); | 
|  | } | 
|  |  | 
|  | /* In active-backup mode, we know that bond->curr_active_slave is always valid if | 
|  | * the bond has a usable interface. | 
|  | */ | 
|  | static netdev_tx_t bond_xmit_activebackup(struct sk_buff *skb, | 
|  | struct net_device *bond_dev) | 
|  | { | 
|  | struct bonding *bond = netdev_priv(bond_dev); | 
|  | struct slave *slave; | 
|  |  | 
|  | slave = bond_xmit_activebackup_slave_get(bond); | 
|  | if (slave) | 
|  | return bond_dev_queue_xmit(bond, skb, slave->dev); | 
|  |  | 
|  | return bond_tx_drop(bond_dev, skb); | 
|  | } | 
|  |  | 
|  | /* Use this to update slave_array when (a) it's not appropriate to update | 
|  | * slave_array right away (note that update_slave_array() may sleep) | 
|  | * and / or (b) RTNL is not held. | 
|  | */ | 
|  | void bond_slave_arr_work_rearm(struct bonding *bond, unsigned long delay) | 
|  | { | 
|  | queue_delayed_work(bond->wq, &bond->slave_arr_work, delay); | 
|  | } | 
|  |  | 
|  | /* Slave array work handler. Holds only RTNL */ | 
|  | static void bond_slave_arr_handler(struct work_struct *work) | 
|  | { | 
|  | struct bonding *bond = container_of(work, struct bonding, | 
|  | slave_arr_work.work); | 
|  | int ret; | 
|  |  | 
|  | if (!rtnl_trylock()) | 
|  | goto err; | 
|  |  | 
|  | ret = bond_update_slave_arr(bond, NULL); | 
|  | rtnl_unlock(); | 
|  | if (ret) { | 
|  | pr_warn_ratelimited("Failed to update slave array from WT\n"); | 
|  | goto err; | 
|  | } | 
|  | return; | 
|  |  | 
|  | err: | 
|  | bond_slave_arr_work_rearm(bond, 1); | 
|  | } | 
|  |  | 
|  | static void bond_skip_slave(struct bond_up_slave *slaves, | 
|  | struct slave *skipslave) | 
|  | { | 
|  | int idx; | 
|  |  | 
|  | /* Rare situation where caller has asked to skip a specific | 
|  | * slave but allocation failed (most likely!). BTW this is | 
|  | * only possible when the call is initiated from | 
|  | * __bond_release_one(). In this situation; overwrite the | 
|  | * skipslave entry in the array with the last entry from the | 
|  | * array to avoid a situation where the xmit path may choose | 
|  | * this to-be-skipped slave to send a packet out. | 
|  | */ | 
|  | for (idx = 0; slaves && idx < slaves->count; idx++) { | 
|  | if (skipslave == slaves->arr[idx]) { | 
|  | slaves->arr[idx] = | 
|  | slaves->arr[slaves->count - 1]; | 
|  | slaves->count--; | 
|  | break; | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | static void bond_set_slave_arr(struct bonding *bond, | 
|  | struct bond_up_slave *usable_slaves, | 
|  | struct bond_up_slave *all_slaves) | 
|  | { | 
|  | struct bond_up_slave *usable, *all; | 
|  |  | 
|  | usable = rtnl_dereference(bond->usable_slaves); | 
|  | rcu_assign_pointer(bond->usable_slaves, usable_slaves); | 
|  | kfree_rcu(usable, rcu); | 
|  |  | 
|  | all = rtnl_dereference(bond->all_slaves); | 
|  | rcu_assign_pointer(bond->all_slaves, all_slaves); | 
|  | kfree_rcu(all, rcu); | 
|  | } | 
|  |  | 
|  | static void bond_reset_slave_arr(struct bonding *bond) | 
|  | { | 
|  | bond_set_slave_arr(bond, NULL, NULL); | 
|  | } | 
|  |  | 
|  | /* Build the usable slaves array in control path for modes that use xmit-hash | 
|  | * to determine the slave interface - | 
|  | * (a) BOND_MODE_8023AD | 
|  | * (b) BOND_MODE_XOR | 
|  | * (c) (BOND_MODE_TLB || BOND_MODE_ALB) && tlb_dynamic_lb == 0 | 
|  | * | 
|  | * The caller is expected to hold RTNL only and NO other lock! | 
|  | */ | 
|  | int bond_update_slave_arr(struct bonding *bond, struct slave *skipslave) | 
|  | { | 
|  | struct bond_up_slave *usable_slaves = NULL, *all_slaves = NULL; | 
|  | struct slave *slave; | 
|  | struct list_head *iter; | 
|  | int agg_id = 0; | 
|  | int ret = 0; | 
|  |  | 
|  | might_sleep(); | 
|  |  | 
|  | usable_slaves = kzalloc(struct_size(usable_slaves, arr, | 
|  | bond->slave_cnt), GFP_KERNEL); | 
|  | all_slaves = kzalloc(struct_size(all_slaves, arr, | 
|  | bond->slave_cnt), GFP_KERNEL); | 
|  | if (!usable_slaves || !all_slaves) { | 
|  | ret = -ENOMEM; | 
|  | goto out; | 
|  | } | 
|  | if (BOND_MODE(bond) == BOND_MODE_8023AD) { | 
|  | struct ad_info ad_info; | 
|  |  | 
|  | spin_lock_bh(&bond->mode_lock); | 
|  | if (bond_3ad_get_active_agg_info(bond, &ad_info)) { | 
|  | spin_unlock_bh(&bond->mode_lock); | 
|  | pr_debug("bond_3ad_get_active_agg_info failed\n"); | 
|  | /* No active aggragator means it's not safe to use | 
|  | * the previous array. | 
|  | */ | 
|  | bond_reset_slave_arr(bond); | 
|  | goto out; | 
|  | } | 
|  | spin_unlock_bh(&bond->mode_lock); | 
|  | agg_id = ad_info.aggregator_id; | 
|  | } | 
|  | bond_for_each_slave(bond, slave, iter) { | 
|  | if (skipslave == slave) | 
|  | continue; | 
|  |  | 
|  | all_slaves->arr[all_slaves->count++] = slave; | 
|  | if (BOND_MODE(bond) == BOND_MODE_8023AD) { | 
|  | struct aggregator *agg; | 
|  |  | 
|  | agg = SLAVE_AD_INFO(slave)->port.aggregator; | 
|  | if (!agg || agg->aggregator_identifier != agg_id) | 
|  | continue; | 
|  | } | 
|  | if (!bond_slave_can_tx(slave)) | 
|  | continue; | 
|  |  | 
|  | slave_dbg(bond->dev, slave->dev, "Adding slave to tx hash array[%d]\n", | 
|  | usable_slaves->count); | 
|  |  | 
|  | usable_slaves->arr[usable_slaves->count++] = slave; | 
|  | } | 
|  |  | 
|  | bond_set_slave_arr(bond, usable_slaves, all_slaves); | 
|  | return ret; | 
|  | out: | 
|  | if (ret != 0 && skipslave) { | 
|  | bond_skip_slave(rtnl_dereference(bond->all_slaves), | 
|  | skipslave); | 
|  | bond_skip_slave(rtnl_dereference(bond->usable_slaves), | 
|  | skipslave); | 
|  | } | 
|  | kfree_rcu(all_slaves, rcu); | 
|  | kfree_rcu(usable_slaves, rcu); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static struct slave *bond_xmit_3ad_xor_slave_get(struct bonding *bond, | 
|  | struct sk_buff *skb, | 
|  | struct bond_up_slave *slaves) | 
|  | { | 
|  | struct slave *slave; | 
|  | unsigned int count; | 
|  | u32 hash; | 
|  |  | 
|  | hash = bond_xmit_hash(bond, skb); | 
|  | count = slaves ? READ_ONCE(slaves->count) : 0; | 
|  | if (unlikely(!count)) | 
|  | return NULL; | 
|  |  | 
|  | slave = slaves->arr[hash % count]; | 
|  | return slave; | 
|  | } | 
|  |  | 
|  | static struct slave *bond_xdp_xmit_3ad_xor_slave_get(struct bonding *bond, | 
|  | struct xdp_buff *xdp) | 
|  | { | 
|  | struct bond_up_slave *slaves; | 
|  | unsigned int count; | 
|  | u32 hash; | 
|  |  | 
|  | hash = bond_xmit_hash_xdp(bond, xdp); | 
|  | slaves = rcu_dereference(bond->usable_slaves); | 
|  | count = slaves ? READ_ONCE(slaves->count) : 0; | 
|  | if (unlikely(!count)) | 
|  | return NULL; | 
|  |  | 
|  | return slaves->arr[hash % count]; | 
|  | } | 
|  |  | 
|  | /* Use this Xmit function for 3AD as well as XOR modes. The current | 
|  | * usable slave array is formed in the control path. The xmit function | 
|  | * just calculates hash and sends the packet out. | 
|  | */ | 
|  | static netdev_tx_t bond_3ad_xor_xmit(struct sk_buff *skb, | 
|  | struct net_device *dev) | 
|  | { | 
|  | struct bonding *bond = netdev_priv(dev); | 
|  | struct bond_up_slave *slaves; | 
|  | struct slave *slave; | 
|  |  | 
|  | slaves = rcu_dereference(bond->usable_slaves); | 
|  | slave = bond_xmit_3ad_xor_slave_get(bond, skb, slaves); | 
|  | if (likely(slave)) | 
|  | return bond_dev_queue_xmit(bond, skb, slave->dev); | 
|  |  | 
|  | return bond_tx_drop(dev, skb); | 
|  | } | 
|  |  | 
|  | /* in broadcast mode, we send everything to all usable interfaces. */ | 
|  | static netdev_tx_t bond_xmit_broadcast(struct sk_buff *skb, | 
|  | struct net_device *bond_dev) | 
|  | { | 
|  | struct bonding *bond = netdev_priv(bond_dev); | 
|  | struct slave *slave = NULL; | 
|  | struct list_head *iter; | 
|  | bool xmit_suc = false; | 
|  | bool skb_used = false; | 
|  |  | 
|  | bond_for_each_slave_rcu(bond, slave, iter) { | 
|  | struct sk_buff *skb2; | 
|  |  | 
|  | if (!(bond_slave_is_up(slave) && slave->link == BOND_LINK_UP)) | 
|  | continue; | 
|  |  | 
|  | if (bond_is_last_slave(bond, slave)) { | 
|  | skb2 = skb; | 
|  | skb_used = true; | 
|  | } else { | 
|  | skb2 = skb_clone(skb, GFP_ATOMIC); | 
|  | if (!skb2) { | 
|  | net_err_ratelimited("%s: Error: %s: skb_clone() failed\n", | 
|  | bond_dev->name, __func__); | 
|  | continue; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (bond_dev_queue_xmit(bond, skb2, slave->dev) == NETDEV_TX_OK) | 
|  | xmit_suc = true; | 
|  | } | 
|  |  | 
|  | if (!skb_used) | 
|  | dev_kfree_skb_any(skb); | 
|  |  | 
|  | if (xmit_suc) | 
|  | return NETDEV_TX_OK; | 
|  |  | 
|  | dev_core_stats_tx_dropped_inc(bond_dev); | 
|  | return NET_XMIT_DROP; | 
|  | } | 
|  |  | 
|  | /*------------------------- Device initialization ---------------------------*/ | 
|  |  | 
|  | /* Lookup the slave that corresponds to a qid */ | 
|  | static inline int bond_slave_override(struct bonding *bond, | 
|  | struct sk_buff *skb) | 
|  | { | 
|  | struct slave *slave = NULL; | 
|  | struct list_head *iter; | 
|  |  | 
|  | if (!skb_rx_queue_recorded(skb)) | 
|  | return 1; | 
|  |  | 
|  | /* Find out if any slaves have the same mapping as this skb. */ | 
|  | bond_for_each_slave_rcu(bond, slave, iter) { | 
|  | if (slave->queue_id == skb_get_queue_mapping(skb)) { | 
|  | if (bond_slave_is_up(slave) && | 
|  | slave->link == BOND_LINK_UP) { | 
|  | bond_dev_queue_xmit(bond, skb, slave->dev); | 
|  | return 0; | 
|  | } | 
|  | /* If the slave isn't UP, use default transmit policy. */ | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | return 1; | 
|  | } | 
|  |  | 
|  |  | 
|  | static u16 bond_select_queue(struct net_device *dev, struct sk_buff *skb, | 
|  | struct net_device *sb_dev) | 
|  | { | 
|  | /* This helper function exists to help dev_pick_tx get the correct | 
|  | * destination queue.  Using a helper function skips a call to | 
|  | * skb_tx_hash and will put the skbs in the queue we expect on their | 
|  | * way down to the bonding driver. | 
|  | */ | 
|  | u16 txq = skb_rx_queue_recorded(skb) ? skb_get_rx_queue(skb) : 0; | 
|  |  | 
|  | /* Save the original txq to restore before passing to the driver */ | 
|  | qdisc_skb_cb(skb)->slave_dev_queue_mapping = skb_get_queue_mapping(skb); | 
|  |  | 
|  | if (unlikely(txq >= dev->real_num_tx_queues)) { | 
|  | do { | 
|  | txq -= dev->real_num_tx_queues; | 
|  | } while (txq >= dev->real_num_tx_queues); | 
|  | } | 
|  | return txq; | 
|  | } | 
|  |  | 
|  | static struct net_device *bond_xmit_get_slave(struct net_device *master_dev, | 
|  | struct sk_buff *skb, | 
|  | bool all_slaves) | 
|  | { | 
|  | struct bonding *bond = netdev_priv(master_dev); | 
|  | struct bond_up_slave *slaves; | 
|  | struct slave *slave = NULL; | 
|  |  | 
|  | switch (BOND_MODE(bond)) { | 
|  | case BOND_MODE_ROUNDROBIN: | 
|  | slave = bond_xmit_roundrobin_slave_get(bond, skb); | 
|  | break; | 
|  | case BOND_MODE_ACTIVEBACKUP: | 
|  | slave = bond_xmit_activebackup_slave_get(bond); | 
|  | break; | 
|  | case BOND_MODE_8023AD: | 
|  | case BOND_MODE_XOR: | 
|  | if (all_slaves) | 
|  | slaves = rcu_dereference(bond->all_slaves); | 
|  | else | 
|  | slaves = rcu_dereference(bond->usable_slaves); | 
|  | slave = bond_xmit_3ad_xor_slave_get(bond, skb, slaves); | 
|  | break; | 
|  | case BOND_MODE_BROADCAST: | 
|  | break; | 
|  | case BOND_MODE_ALB: | 
|  | slave = bond_xmit_alb_slave_get(bond, skb); | 
|  | break; | 
|  | case BOND_MODE_TLB: | 
|  | slave = bond_xmit_tlb_slave_get(bond, skb); | 
|  | break; | 
|  | default: | 
|  | /* Should never happen, mode already checked */ | 
|  | WARN_ONCE(true, "Unknown bonding mode"); | 
|  | break; | 
|  | } | 
|  |  | 
|  | if (slave) | 
|  | return slave->dev; | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | static void bond_sk_to_flow(struct sock *sk, struct flow_keys *flow) | 
|  | { | 
|  | switch (sk->sk_family) { | 
|  | #if IS_ENABLED(CONFIG_IPV6) | 
|  | case AF_INET6: | 
|  | if (ipv6_only_sock(sk) || | 
|  | ipv6_addr_type(&sk->sk_v6_daddr) != IPV6_ADDR_MAPPED) { | 
|  | flow->control.addr_type = FLOW_DISSECTOR_KEY_IPV6_ADDRS; | 
|  | flow->addrs.v6addrs.src = inet6_sk(sk)->saddr; | 
|  | flow->addrs.v6addrs.dst = sk->sk_v6_daddr; | 
|  | break; | 
|  | } | 
|  | fallthrough; | 
|  | #endif | 
|  | default: /* AF_INET */ | 
|  | flow->control.addr_type = FLOW_DISSECTOR_KEY_IPV4_ADDRS; | 
|  | flow->addrs.v4addrs.src = inet_sk(sk)->inet_rcv_saddr; | 
|  | flow->addrs.v4addrs.dst = inet_sk(sk)->inet_daddr; | 
|  | break; | 
|  | } | 
|  |  | 
|  | flow->ports.src = inet_sk(sk)->inet_sport; | 
|  | flow->ports.dst = inet_sk(sk)->inet_dport; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * bond_sk_hash_l34 - generate a hash value based on the socket's L3 and L4 fields | 
|  | * @sk: socket to use for headers | 
|  | * | 
|  | * This function will extract the necessary field from the socket and use | 
|  | * them to generate a hash based on the LAYER34 xmit_policy. | 
|  | * Assumes that sk is a TCP or UDP socket. | 
|  | */ | 
|  | static u32 bond_sk_hash_l34(struct sock *sk) | 
|  | { | 
|  | struct flow_keys flow; | 
|  | u32 hash; | 
|  |  | 
|  | bond_sk_to_flow(sk, &flow); | 
|  |  | 
|  | /* L4 */ | 
|  | memcpy(&hash, &flow.ports.ports, sizeof(hash)); | 
|  | /* L3 */ | 
|  | return bond_ip_hash(hash, &flow, BOND_XMIT_POLICY_LAYER34); | 
|  | } | 
|  |  | 
|  | static struct net_device *__bond_sk_get_lower_dev(struct bonding *bond, | 
|  | struct sock *sk) | 
|  | { | 
|  | struct bond_up_slave *slaves; | 
|  | struct slave *slave; | 
|  | unsigned int count; | 
|  | u32 hash; | 
|  |  | 
|  | slaves = rcu_dereference(bond->usable_slaves); | 
|  | count = slaves ? READ_ONCE(slaves->count) : 0; | 
|  | if (unlikely(!count)) | 
|  | return NULL; | 
|  |  | 
|  | hash = bond_sk_hash_l34(sk); | 
|  | slave = slaves->arr[hash % count]; | 
|  |  | 
|  | return slave->dev; | 
|  | } | 
|  |  | 
|  | static struct net_device *bond_sk_get_lower_dev(struct net_device *dev, | 
|  | struct sock *sk) | 
|  | { | 
|  | struct bonding *bond = netdev_priv(dev); | 
|  | struct net_device *lower = NULL; | 
|  |  | 
|  | rcu_read_lock(); | 
|  | if (bond_sk_check(bond)) | 
|  | lower = __bond_sk_get_lower_dev(bond, sk); | 
|  | rcu_read_unlock(); | 
|  |  | 
|  | return lower; | 
|  | } | 
|  |  | 
|  | #if IS_ENABLED(CONFIG_TLS_DEVICE) | 
|  | static netdev_tx_t bond_tls_device_xmit(struct bonding *bond, struct sk_buff *skb, | 
|  | struct net_device *dev) | 
|  | { | 
|  | struct net_device *tls_netdev = rcu_dereference(tls_get_ctx(skb->sk)->netdev); | 
|  |  | 
|  | /* tls_netdev might become NULL, even if tls_is_skb_tx_device_offloaded | 
|  | * was true, if tls_device_down is running in parallel, but it's OK, | 
|  | * because bond_get_slave_by_dev has a NULL check. | 
|  | */ | 
|  | if (likely(bond_get_slave_by_dev(bond, tls_netdev))) | 
|  | return bond_dev_queue_xmit(bond, skb, tls_netdev); | 
|  | return bond_tx_drop(dev, skb); | 
|  | } | 
|  | #endif | 
|  |  | 
|  | static netdev_tx_t __bond_start_xmit(struct sk_buff *skb, struct net_device *dev) | 
|  | { | 
|  | struct bonding *bond = netdev_priv(dev); | 
|  |  | 
|  | if (bond_should_override_tx_queue(bond) && | 
|  | !bond_slave_override(bond, skb)) | 
|  | return NETDEV_TX_OK; | 
|  |  | 
|  | #if IS_ENABLED(CONFIG_TLS_DEVICE) | 
|  | if (tls_is_skb_tx_device_offloaded(skb)) | 
|  | return bond_tls_device_xmit(bond, skb, dev); | 
|  | #endif | 
|  |  | 
|  | switch (BOND_MODE(bond)) { | 
|  | case BOND_MODE_ROUNDROBIN: | 
|  | return bond_xmit_roundrobin(skb, dev); | 
|  | case BOND_MODE_ACTIVEBACKUP: | 
|  | return bond_xmit_activebackup(skb, dev); | 
|  | case BOND_MODE_8023AD: | 
|  | case BOND_MODE_XOR: | 
|  | return bond_3ad_xor_xmit(skb, dev); | 
|  | case BOND_MODE_BROADCAST: | 
|  | return bond_xmit_broadcast(skb, dev); | 
|  | case BOND_MODE_ALB: | 
|  | return bond_alb_xmit(skb, dev); | 
|  | case BOND_MODE_TLB: | 
|  | return bond_tlb_xmit(skb, dev); | 
|  | default: | 
|  | /* Should never happen, mode already checked */ | 
|  | netdev_err(dev, "Unknown bonding mode %d\n", BOND_MODE(bond)); | 
|  | WARN_ON_ONCE(1); | 
|  | return bond_tx_drop(dev, skb); | 
|  | } | 
|  | } | 
|  |  | 
|  | static netdev_tx_t bond_start_xmit(struct sk_buff *skb, struct net_device *dev) | 
|  | { | 
|  | struct bonding *bond = netdev_priv(dev); | 
|  | netdev_tx_t ret = NETDEV_TX_OK; | 
|  |  | 
|  | /* If we risk deadlock from transmitting this in the | 
|  | * netpoll path, tell netpoll to queue the frame for later tx | 
|  | */ | 
|  | if (unlikely(is_netpoll_tx_blocked(dev))) | 
|  | return NETDEV_TX_BUSY; | 
|  |  | 
|  | rcu_read_lock(); | 
|  | if (bond_has_slaves(bond)) | 
|  | ret = __bond_start_xmit(skb, dev); | 
|  | else | 
|  | ret = bond_tx_drop(dev, skb); | 
|  | rcu_read_unlock(); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static struct net_device * | 
|  | bond_xdp_get_xmit_slave(struct net_device *bond_dev, struct xdp_buff *xdp) | 
|  | { | 
|  | struct bonding *bond = netdev_priv(bond_dev); | 
|  | struct slave *slave; | 
|  |  | 
|  | /* Caller needs to hold rcu_read_lock() */ | 
|  |  | 
|  | switch (BOND_MODE(bond)) { | 
|  | case BOND_MODE_ROUNDROBIN: | 
|  | slave = bond_xdp_xmit_roundrobin_slave_get(bond, xdp); | 
|  | break; | 
|  |  | 
|  | case BOND_MODE_ACTIVEBACKUP: | 
|  | slave = bond_xmit_activebackup_slave_get(bond); | 
|  | break; | 
|  |  | 
|  | case BOND_MODE_8023AD: | 
|  | case BOND_MODE_XOR: | 
|  | slave = bond_xdp_xmit_3ad_xor_slave_get(bond, xdp); | 
|  | break; | 
|  |  | 
|  | default: | 
|  | /* Should never happen. Mode guarded by bond_xdp_check() */ | 
|  | netdev_err(bond_dev, "Unknown bonding mode %d for xdp xmit\n", BOND_MODE(bond)); | 
|  | WARN_ON_ONCE(1); | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | if (slave) | 
|  | return slave->dev; | 
|  |  | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | static int bond_xdp_xmit(struct net_device *bond_dev, | 
|  | int n, struct xdp_frame **frames, u32 flags) | 
|  | { | 
|  | int nxmit, err = -ENXIO; | 
|  |  | 
|  | rcu_read_lock(); | 
|  |  | 
|  | for (nxmit = 0; nxmit < n; nxmit++) { | 
|  | struct xdp_frame *frame = frames[nxmit]; | 
|  | struct xdp_frame *frames1[] = {frame}; | 
|  | struct net_device *slave_dev; | 
|  | struct xdp_buff xdp; | 
|  |  | 
|  | xdp_convert_frame_to_buff(frame, &xdp); | 
|  |  | 
|  | slave_dev = bond_xdp_get_xmit_slave(bond_dev, &xdp); | 
|  | if (!slave_dev) { | 
|  | err = -ENXIO; | 
|  | break; | 
|  | } | 
|  |  | 
|  | err = slave_dev->netdev_ops->ndo_xdp_xmit(slave_dev, 1, frames1, flags); | 
|  | if (err < 1) | 
|  | break; | 
|  | } | 
|  |  | 
|  | rcu_read_unlock(); | 
|  |  | 
|  | /* If error happened on the first frame then we can pass the error up, otherwise | 
|  | * report the number of frames that were xmitted. | 
|  | */ | 
|  | if (err < 0) | 
|  | return (nxmit == 0 ? err : nxmit); | 
|  |  | 
|  | return nxmit; | 
|  | } | 
|  |  | 
|  | static int bond_xdp_set(struct net_device *dev, struct bpf_prog *prog, | 
|  | struct netlink_ext_ack *extack) | 
|  | { | 
|  | struct bonding *bond = netdev_priv(dev); | 
|  | struct list_head *iter; | 
|  | struct slave *slave, *rollback_slave; | 
|  | struct bpf_prog *old_prog; | 
|  | struct netdev_bpf xdp = { | 
|  | .command = XDP_SETUP_PROG, | 
|  | .flags   = 0, | 
|  | .prog    = prog, | 
|  | .extack  = extack, | 
|  | }; | 
|  | int err; | 
|  |  | 
|  | ASSERT_RTNL(); | 
|  |  | 
|  | if (!bond_xdp_check(bond)) | 
|  | return -EOPNOTSUPP; | 
|  |  | 
|  | old_prog = bond->xdp_prog; | 
|  | bond->xdp_prog = prog; | 
|  |  | 
|  | bond_for_each_slave(bond, slave, iter) { | 
|  | struct net_device *slave_dev = slave->dev; | 
|  |  | 
|  | if (!slave_dev->netdev_ops->ndo_bpf || | 
|  | !slave_dev->netdev_ops->ndo_xdp_xmit) { | 
|  | SLAVE_NL_ERR(dev, slave_dev, extack, | 
|  | "Slave device does not support XDP"); | 
|  | err = -EOPNOTSUPP; | 
|  | goto err; | 
|  | } | 
|  |  | 
|  | if (dev_xdp_prog_count(slave_dev) > 0) { | 
|  | SLAVE_NL_ERR(dev, slave_dev, extack, | 
|  | "Slave has XDP program loaded, please unload before enslaving"); | 
|  | err = -EOPNOTSUPP; | 
|  | goto err; | 
|  | } | 
|  |  | 
|  | err = slave_dev->netdev_ops->ndo_bpf(slave_dev, &xdp); | 
|  | if (err < 0) { | 
|  | /* ndo_bpf() sets extack error message */ | 
|  | slave_err(dev, slave_dev, "Error %d calling ndo_bpf\n", err); | 
|  | goto err; | 
|  | } | 
|  | if (prog) | 
|  | bpf_prog_inc(prog); | 
|  | } | 
|  |  | 
|  | if (prog) { | 
|  | static_branch_inc(&bpf_master_redirect_enabled_key); | 
|  | } else if (old_prog) { | 
|  | bpf_prog_put(old_prog); | 
|  | static_branch_dec(&bpf_master_redirect_enabled_key); | 
|  | } | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | err: | 
|  | /* unwind the program changes */ | 
|  | bond->xdp_prog = old_prog; | 
|  | xdp.prog = old_prog; | 
|  | xdp.extack = NULL; /* do not overwrite original error */ | 
|  |  | 
|  | bond_for_each_slave(bond, rollback_slave, iter) { | 
|  | struct net_device *slave_dev = rollback_slave->dev; | 
|  | int err_unwind; | 
|  |  | 
|  | if (slave == rollback_slave) | 
|  | break; | 
|  |  | 
|  | err_unwind = slave_dev->netdev_ops->ndo_bpf(slave_dev, &xdp); | 
|  | if (err_unwind < 0) | 
|  | slave_err(dev, slave_dev, | 
|  | "Error %d when unwinding XDP program change\n", err_unwind); | 
|  | else if (xdp.prog) | 
|  | bpf_prog_inc(xdp.prog); | 
|  | } | 
|  | return err; | 
|  | } | 
|  |  | 
|  | static int bond_xdp(struct net_device *dev, struct netdev_bpf *xdp) | 
|  | { | 
|  | switch (xdp->command) { | 
|  | case XDP_SETUP_PROG: | 
|  | return bond_xdp_set(dev, xdp->prog, xdp->extack); | 
|  | default: | 
|  | return -EINVAL; | 
|  | } | 
|  | } | 
|  |  | 
|  | static u32 bond_mode_bcast_speed(struct slave *slave, u32 speed) | 
|  | { | 
|  | if (speed == 0 || speed == SPEED_UNKNOWN) | 
|  | speed = slave->speed; | 
|  | else | 
|  | speed = min(speed, slave->speed); | 
|  |  | 
|  | return speed; | 
|  | } | 
|  |  | 
|  | /* Set the BOND_PHC_INDEX flag to notify user space */ | 
|  | static int bond_set_phc_index_flag(struct kernel_hwtstamp_config *kernel_cfg) | 
|  | { | 
|  | struct ifreq *ifr = kernel_cfg->ifr; | 
|  | struct hwtstamp_config cfg; | 
|  |  | 
|  | if (kernel_cfg->copied_to_user) { | 
|  | /* Lower device has a legacy implementation */ | 
|  | if (copy_from_user(&cfg, ifr->ifr_data, sizeof(cfg))) | 
|  | return -EFAULT; | 
|  |  | 
|  | cfg.flags |= HWTSTAMP_FLAG_BONDED_PHC_INDEX; | 
|  | if (copy_to_user(ifr->ifr_data, &cfg, sizeof(cfg))) | 
|  | return -EFAULT; | 
|  | } else { | 
|  | kernel_cfg->flags |= HWTSTAMP_FLAG_BONDED_PHC_INDEX; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int bond_hwtstamp_get(struct net_device *dev, | 
|  | struct kernel_hwtstamp_config *cfg) | 
|  | { | 
|  | struct bonding *bond = netdev_priv(dev); | 
|  | struct net_device *real_dev; | 
|  | int err; | 
|  |  | 
|  | real_dev = bond_option_active_slave_get_rcu(bond); | 
|  | if (!real_dev) | 
|  | return -EOPNOTSUPP; | 
|  |  | 
|  | err = generic_hwtstamp_get_lower(real_dev, cfg); | 
|  | if (err) | 
|  | return err; | 
|  |  | 
|  | return bond_set_phc_index_flag(cfg); | 
|  | } | 
|  |  | 
|  | static int bond_hwtstamp_set(struct net_device *dev, | 
|  | struct kernel_hwtstamp_config *cfg, | 
|  | struct netlink_ext_ack *extack) | 
|  | { | 
|  | struct bonding *bond = netdev_priv(dev); | 
|  | struct net_device *real_dev; | 
|  | int err; | 
|  |  | 
|  | if (!(cfg->flags & HWTSTAMP_FLAG_BONDED_PHC_INDEX)) | 
|  | return -EOPNOTSUPP; | 
|  |  | 
|  | real_dev = bond_option_active_slave_get_rcu(bond); | 
|  | if (!real_dev) | 
|  | return -EOPNOTSUPP; | 
|  |  | 
|  | err = generic_hwtstamp_set_lower(real_dev, cfg, extack); | 
|  | if (err) | 
|  | return err; | 
|  |  | 
|  | return bond_set_phc_index_flag(cfg); | 
|  | } | 
|  |  | 
|  | static int bond_ethtool_get_link_ksettings(struct net_device *bond_dev, | 
|  | struct ethtool_link_ksettings *cmd) | 
|  | { | 
|  | struct bonding *bond = netdev_priv(bond_dev); | 
|  | struct list_head *iter; | 
|  | struct slave *slave; | 
|  | u32 speed = 0; | 
|  |  | 
|  | cmd->base.duplex = DUPLEX_UNKNOWN; | 
|  | cmd->base.port = PORT_OTHER; | 
|  |  | 
|  | /* Since bond_slave_can_tx returns false for all inactive or down slaves, we | 
|  | * do not need to check mode.  Though link speed might not represent | 
|  | * the true receive or transmit bandwidth (not all modes are symmetric) | 
|  | * this is an accurate maximum. | 
|  | */ | 
|  | bond_for_each_slave(bond, slave, iter) { | 
|  | if (bond_slave_can_tx(slave)) { | 
|  | bond_update_speed_duplex(slave); | 
|  | if (slave->speed != SPEED_UNKNOWN) { | 
|  | if (BOND_MODE(bond) == BOND_MODE_BROADCAST) | 
|  | speed = bond_mode_bcast_speed(slave, | 
|  | speed); | 
|  | else | 
|  | speed += slave->speed; | 
|  | } | 
|  | if (cmd->base.duplex == DUPLEX_UNKNOWN && | 
|  | slave->duplex != DUPLEX_UNKNOWN) | 
|  | cmd->base.duplex = slave->duplex; | 
|  | } | 
|  | } | 
|  | cmd->base.speed = speed ? : SPEED_UNKNOWN; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void bond_ethtool_get_drvinfo(struct net_device *bond_dev, | 
|  | struct ethtool_drvinfo *drvinfo) | 
|  | { | 
|  | strscpy(drvinfo->driver, DRV_NAME, sizeof(drvinfo->driver)); | 
|  | snprintf(drvinfo->fw_version, sizeof(drvinfo->fw_version), "%d", | 
|  | BOND_ABI_VERSION); | 
|  | } | 
|  |  | 
|  | static int bond_ethtool_get_ts_info(struct net_device *bond_dev, | 
|  | struct ethtool_ts_info *info) | 
|  | { | 
|  | struct bonding *bond = netdev_priv(bond_dev); | 
|  | struct ethtool_ts_info ts_info; | 
|  | struct net_device *real_dev; | 
|  | bool sw_tx_support = false; | 
|  | struct list_head *iter; | 
|  | struct slave *slave; | 
|  | int ret = 0; | 
|  |  | 
|  | rcu_read_lock(); | 
|  | real_dev = bond_option_active_slave_get_rcu(bond); | 
|  | dev_hold(real_dev); | 
|  | rcu_read_unlock(); | 
|  |  | 
|  | if (real_dev) { | 
|  | ret = ethtool_get_ts_info_by_layer(real_dev, info); | 
|  | } else { | 
|  | /* Check if all slaves support software tx timestamping */ | 
|  | rcu_read_lock(); | 
|  | bond_for_each_slave_rcu(bond, slave, iter) { | 
|  | ret = ethtool_get_ts_info_by_layer(slave->dev, &ts_info); | 
|  | if (!ret && (ts_info.so_timestamping & SOF_TIMESTAMPING_TX_SOFTWARE)) { | 
|  | sw_tx_support = true; | 
|  | continue; | 
|  | } | 
|  |  | 
|  | sw_tx_support = false; | 
|  | break; | 
|  | } | 
|  | rcu_read_unlock(); | 
|  | } | 
|  |  | 
|  | if (sw_tx_support) | 
|  | info->so_timestamping |= SOF_TIMESTAMPING_TX_SOFTWARE; | 
|  |  | 
|  | dev_put(real_dev); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static const struct ethtool_ops bond_ethtool_ops = { | 
|  | .get_drvinfo		= bond_ethtool_get_drvinfo, | 
|  | .get_link		= ethtool_op_get_link, | 
|  | .get_link_ksettings	= bond_ethtool_get_link_ksettings, | 
|  | .get_ts_info		= bond_ethtool_get_ts_info, | 
|  | }; | 
|  |  | 
|  | static const struct net_device_ops bond_netdev_ops = { | 
|  | .ndo_init		= bond_init, | 
|  | .ndo_uninit		= bond_uninit, | 
|  | .ndo_open		= bond_open, | 
|  | .ndo_stop		= bond_close, | 
|  | .ndo_start_xmit		= bond_start_xmit, | 
|  | .ndo_select_queue	= bond_select_queue, | 
|  | .ndo_get_stats64	= bond_get_stats, | 
|  | .ndo_eth_ioctl		= bond_eth_ioctl, | 
|  | .ndo_siocbond		= bond_do_ioctl, | 
|  | .ndo_siocdevprivate	= bond_siocdevprivate, | 
|  | .ndo_change_rx_flags	= bond_change_rx_flags, | 
|  | .ndo_set_rx_mode	= bond_set_rx_mode, | 
|  | .ndo_change_mtu		= bond_change_mtu, | 
|  | .ndo_set_mac_address	= bond_set_mac_address, | 
|  | .ndo_neigh_setup	= bond_neigh_setup, | 
|  | .ndo_vlan_rx_add_vid	= bond_vlan_rx_add_vid, | 
|  | .ndo_vlan_rx_kill_vid	= bond_vlan_rx_kill_vid, | 
|  | #ifdef CONFIG_NET_POLL_CONTROLLER | 
|  | .ndo_netpoll_setup	= bond_netpoll_setup, | 
|  | .ndo_netpoll_cleanup	= bond_netpoll_cleanup, | 
|  | .ndo_poll_controller	= bond_poll_controller, | 
|  | #endif | 
|  | .ndo_add_slave		= bond_enslave, | 
|  | .ndo_del_slave		= bond_release, | 
|  | .ndo_fix_features	= bond_fix_features, | 
|  | .ndo_features_check	= passthru_features_check, | 
|  | .ndo_get_xmit_slave	= bond_xmit_get_slave, | 
|  | .ndo_sk_get_lower_dev	= bond_sk_get_lower_dev, | 
|  | .ndo_bpf		= bond_xdp, | 
|  | .ndo_xdp_xmit           = bond_xdp_xmit, | 
|  | .ndo_xdp_get_xmit_slave = bond_xdp_get_xmit_slave, | 
|  | .ndo_hwtstamp_get	= bond_hwtstamp_get, | 
|  | .ndo_hwtstamp_set	= bond_hwtstamp_set, | 
|  | }; | 
|  |  | 
|  | static const struct device_type bond_type = { | 
|  | .name = "bond", | 
|  | }; | 
|  |  | 
|  | static void bond_destructor(struct net_device *bond_dev) | 
|  | { | 
|  | struct bonding *bond = netdev_priv(bond_dev); | 
|  |  | 
|  | if (bond->wq) | 
|  | destroy_workqueue(bond->wq); | 
|  |  | 
|  | free_percpu(bond->rr_tx_counter); | 
|  | } | 
|  |  | 
|  | void bond_setup(struct net_device *bond_dev) | 
|  | { | 
|  | struct bonding *bond = netdev_priv(bond_dev); | 
|  |  | 
|  | spin_lock_init(&bond->mode_lock); | 
|  | bond->params = bonding_defaults; | 
|  |  | 
|  | /* Initialize pointers */ | 
|  | bond->dev = bond_dev; | 
|  |  | 
|  | /* Initialize the device entry points */ | 
|  | ether_setup(bond_dev); | 
|  | bond_dev->max_mtu = ETH_MAX_MTU; | 
|  | bond_dev->netdev_ops = &bond_netdev_ops; | 
|  | bond_dev->ethtool_ops = &bond_ethtool_ops; | 
|  |  | 
|  | bond_dev->needs_free_netdev = true; | 
|  | bond_dev->priv_destructor = bond_destructor; | 
|  |  | 
|  | SET_NETDEV_DEVTYPE(bond_dev, &bond_type); | 
|  |  | 
|  | /* Initialize the device options */ | 
|  | bond_dev->flags |= IFF_MASTER; | 
|  | bond_dev->priv_flags |= IFF_BONDING | IFF_UNICAST_FLT | IFF_NO_QUEUE; | 
|  | bond_dev->priv_flags &= ~(IFF_XMIT_DST_RELEASE | IFF_TX_SKB_SHARING); | 
|  |  | 
|  | #ifdef CONFIG_XFRM_OFFLOAD | 
|  | /* set up xfrm device ops (only supported in active-backup right now) */ | 
|  | bond_dev->xfrmdev_ops = &bond_xfrmdev_ops; | 
|  | INIT_LIST_HEAD(&bond->ipsec_list); | 
|  | spin_lock_init(&bond->ipsec_lock); | 
|  | #endif /* CONFIG_XFRM_OFFLOAD */ | 
|  |  | 
|  | /* don't acquire bond device's netif_tx_lock when transmitting */ | 
|  | bond_dev->features |= NETIF_F_LLTX; | 
|  |  | 
|  | /* By default, we declare the bond to be fully | 
|  | * VLAN hardware accelerated capable. Special | 
|  | * care is taken in the various xmit functions | 
|  | * when there are slaves that are not hw accel | 
|  | * capable | 
|  | */ | 
|  |  | 
|  | /* Don't allow bond devices to change network namespaces. */ | 
|  | bond_dev->features |= NETIF_F_NETNS_LOCAL; | 
|  |  | 
|  | bond_dev->hw_features = BOND_VLAN_FEATURES | | 
|  | NETIF_F_HW_VLAN_CTAG_RX | | 
|  | NETIF_F_HW_VLAN_CTAG_FILTER | | 
|  | NETIF_F_HW_VLAN_STAG_RX | | 
|  | NETIF_F_HW_VLAN_STAG_FILTER; | 
|  |  | 
|  | bond_dev->hw_features |= NETIF_F_GSO_ENCAP_ALL; | 
|  | bond_dev->features |= bond_dev->hw_features; | 
|  | bond_dev->features |= NETIF_F_HW_VLAN_CTAG_TX | NETIF_F_HW_VLAN_STAG_TX; | 
|  | #ifdef CONFIG_XFRM_OFFLOAD | 
|  | bond_dev->hw_features |= BOND_XFRM_FEATURES; | 
|  | /* Only enable XFRM features if this is an active-backup config */ | 
|  | if (BOND_MODE(bond) == BOND_MODE_ACTIVEBACKUP) | 
|  | bond_dev->features |= BOND_XFRM_FEATURES; | 
|  | #endif /* CONFIG_XFRM_OFFLOAD */ | 
|  | } | 
|  |  | 
|  | /* Destroy a bonding device. | 
|  | * Must be under rtnl_lock when this function is called. | 
|  | */ | 
|  | static void bond_uninit(struct net_device *bond_dev) | 
|  | { | 
|  | struct bonding *bond = netdev_priv(bond_dev); | 
|  | struct list_head *iter; | 
|  | struct slave *slave; | 
|  |  | 
|  | bond_netpoll_cleanup(bond_dev); | 
|  |  | 
|  | /* Release the bonded slaves */ | 
|  | bond_for_each_slave(bond, slave, iter) | 
|  | __bond_release_one(bond_dev, slave->dev, true, true); | 
|  | netdev_info(bond_dev, "Released all slaves\n"); | 
|  |  | 
|  | bond_set_slave_arr(bond, NULL, NULL); | 
|  |  | 
|  | list_del(&bond->bond_list); | 
|  |  | 
|  | bond_debug_unregister(bond); | 
|  | } | 
|  |  | 
|  | /*------------------------- Module initialization ---------------------------*/ | 
|  |  | 
|  | static int __init bond_check_params(struct bond_params *params) | 
|  | { | 
|  | int arp_validate_value, fail_over_mac_value, primary_reselect_value, i; | 
|  | struct bond_opt_value newval; | 
|  | const struct bond_opt_value *valptr; | 
|  | int arp_all_targets_value = 0; | 
|  | u16 ad_actor_sys_prio = 0; | 
|  | u16 ad_user_port_key = 0; | 
|  | __be32 arp_target[BOND_MAX_ARP_TARGETS] = { 0 }; | 
|  | int arp_ip_count; | 
|  | int bond_mode	= BOND_MODE_ROUNDROBIN; | 
|  | int xmit_hashtype = BOND_XMIT_POLICY_LAYER2; | 
|  | int lacp_fast = 0; | 
|  | int tlb_dynamic_lb; | 
|  |  | 
|  | /* Convert string parameters. */ | 
|  | if (mode) { | 
|  | bond_opt_initstr(&newval, mode); | 
|  | valptr = bond_opt_parse(bond_opt_get(BOND_OPT_MODE), &newval); | 
|  | if (!valptr) { | 
|  | pr_err("Error: Invalid bonding mode \"%s\"\n", mode); | 
|  | return -EINVAL; | 
|  | } | 
|  | bond_mode = valptr->value; | 
|  | } | 
|  |  | 
|  | if (xmit_hash_policy) { | 
|  | if (bond_mode == BOND_MODE_ROUNDROBIN || | 
|  | bond_mode == BOND_MODE_ACTIVEBACKUP || | 
|  | bond_mode == BOND_MODE_BROADCAST) { | 
|  | pr_info("xmit_hash_policy param is irrelevant in mode %s\n", | 
|  | bond_mode_name(bond_mode)); | 
|  | } else { | 
|  | bond_opt_initstr(&newval, xmit_hash_policy); | 
|  | valptr = bond_opt_parse(bond_opt_get(BOND_OPT_XMIT_HASH), | 
|  | &newval); | 
|  | if (!valptr) { | 
|  | pr_err("Error: Invalid xmit_hash_policy \"%s\"\n", | 
|  | xmit_hash_policy); | 
|  | return -EINVAL; | 
|  | } | 
|  | xmit_hashtype = valptr->value; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (lacp_rate) { | 
|  | if (bond_mode != BOND_MODE_8023AD) { | 
|  | pr_info("lacp_rate param is irrelevant in mode %s\n", | 
|  | bond_mode_name(bond_mode)); | 
|  | } else { | 
|  | bond_opt_initstr(&newval, lacp_rate); | 
|  | valptr = bond_opt_parse(bond_opt_get(BOND_OPT_LACP_RATE), | 
|  | &newval); | 
|  | if (!valptr) { | 
|  | pr_err("Error: Invalid lacp rate \"%s\"\n", | 
|  | lacp_rate); | 
|  | return -EINVAL; | 
|  | } | 
|  | lacp_fast = valptr->value; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (ad_select) { | 
|  | bond_opt_initstr(&newval, ad_select); | 
|  | valptr = bond_opt_parse(bond_opt_get(BOND_OPT_AD_SELECT), | 
|  | &newval); | 
|  | if (!valptr) { | 
|  | pr_err("Error: Invalid ad_select \"%s\"\n", ad_select); | 
|  | return -EINVAL; | 
|  | } | 
|  | params->ad_select = valptr->value; | 
|  | if (bond_mode != BOND_MODE_8023AD) | 
|  | pr_warn("ad_select param only affects 802.3ad mode\n"); | 
|  | } else { | 
|  | params->ad_select = BOND_AD_STABLE; | 
|  | } | 
|  |  | 
|  | if (max_bonds < 0) { | 
|  | pr_warn("Warning: max_bonds (%d) not in range %d-%d, so it was reset to BOND_DEFAULT_MAX_BONDS (%d)\n", | 
|  | max_bonds, 0, INT_MAX, BOND_DEFAULT_MAX_BONDS); | 
|  | max_bonds = BOND_DEFAULT_MAX_BONDS; | 
|  | } | 
|  |  | 
|  | if (miimon < 0) { | 
|  | pr_warn("Warning: miimon module parameter (%d), not in range 0-%d, so it was reset to 0\n", | 
|  | miimon, INT_MAX); | 
|  | miimon = 0; | 
|  | } | 
|  |  | 
|  | if (updelay < 0) { | 
|  | pr_warn("Warning: updelay module parameter (%d), not in range 0-%d, so it was reset to 0\n", | 
|  | updelay, INT_MAX); | 
|  | updelay = 0; | 
|  | } | 
|  |  | 
|  | if (downdelay < 0) { | 
|  | pr_warn("Warning: downdelay module parameter (%d), not in range 0-%d, so it was reset to 0\n", | 
|  | downdelay, INT_MAX); | 
|  | downdelay = 0; | 
|  | } | 
|  |  | 
|  | if ((use_carrier != 0) && (use_carrier != 1)) { | 
|  | pr_warn("Warning: use_carrier module parameter (%d), not of valid value (0/1), so it was set to 1\n", | 
|  | use_carrier); | 
|  | use_carrier = 1; | 
|  | } | 
|  |  | 
|  | if (num_peer_notif < 0 || num_peer_notif > 255) { | 
|  | pr_warn("Warning: num_grat_arp/num_unsol_na (%d) not in range 0-255 so it was reset to 1\n", | 
|  | num_peer_notif); | 
|  | num_peer_notif = 1; | 
|  | } | 
|  |  | 
|  | /* reset values for 802.3ad/TLB/ALB */ | 
|  | if (!bond_mode_uses_arp(bond_mode)) { | 
|  | if (!miimon) { | 
|  | pr_warn("Warning: miimon must be specified, otherwise bonding will not detect link failure, speed and duplex which are essential for 802.3ad operation\n"); | 
|  | pr_warn("Forcing miimon to 100msec\n"); | 
|  | miimon = BOND_DEFAULT_MIIMON; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (tx_queues < 1 || tx_queues > 255) { | 
|  | pr_warn("Warning: tx_queues (%d) should be between 1 and 255, resetting to %d\n", | 
|  | tx_queues, BOND_DEFAULT_TX_QUEUES); | 
|  | tx_queues = BOND_DEFAULT_TX_QUEUES; | 
|  | } | 
|  |  | 
|  | if ((all_slaves_active != 0) && (all_slaves_active != 1)) { | 
|  | pr_warn("Warning: all_slaves_active module parameter (%d), not of valid value (0/1), so it was set to 0\n", | 
|  | all_slaves_active); | 
|  | all_slaves_active = 0; | 
|  | } | 
|  |  | 
|  | if (resend_igmp < 0 || resend_igmp > 255) { | 
|  | pr_warn("Warning: resend_igmp (%d) should be between 0 and 255, resetting to %d\n", | 
|  | resend_igmp, BOND_DEFAULT_RESEND_IGMP); | 
|  | resend_igmp = BOND_DEFAULT_RESEND_IGMP; | 
|  | } | 
|  |  | 
|  | bond_opt_initval(&newval, packets_per_slave); | 
|  | if (!bond_opt_parse(bond_opt_get(BOND_OPT_PACKETS_PER_SLAVE), &newval)) { | 
|  | pr_warn("Warning: packets_per_slave (%d) should be between 0 and %u resetting to 1\n", | 
|  | packets_per_slave, USHRT_MAX); | 
|  | packets_per_slave = 1; | 
|  | } | 
|  |  | 
|  | if (bond_mode == BOND_MODE_ALB) { | 
|  | pr_notice("In ALB mode you might experience client disconnections upon reconnection of a link if the bonding module updelay parameter (%d msec) is incompatible with the forwarding delay time of the switch\n", | 
|  | updelay); | 
|  | } | 
|  |  | 
|  | if (!miimon) { | 
|  | if (updelay || downdelay) { | 
|  | /* just warn the user the up/down delay will have | 
|  | * no effect since miimon is zero... | 
|  | */ | 
|  | pr_warn("Warning: miimon module parameter not set and updelay (%d) or downdelay (%d) module parameter is set; updelay and downdelay have no effect unless miimon is set\n", | 
|  | updelay, downdelay); | 
|  | } | 
|  | } else { | 
|  | /* don't allow arp monitoring */ | 
|  | if (arp_interval) { | 
|  | pr_warn("Warning: miimon (%d) and arp_interval (%d) can't be used simultaneously, disabling ARP monitoring\n", | 
|  | miimon, arp_interval); | 
|  | arp_interval = 0; | 
|  | } | 
|  |  | 
|  | if ((updelay % miimon) != 0) { | 
|  | pr_warn("Warning: updelay (%d) is not a multiple of miimon (%d), updelay rounded to %d ms\n", | 
|  | updelay, miimon, (updelay / miimon) * miimon); | 
|  | } | 
|  |  | 
|  | updelay /= miimon; | 
|  |  | 
|  | if ((downdelay % miimon) != 0) { | 
|  | pr_warn("Warning: downdelay (%d) is not a multiple of miimon (%d), downdelay rounded to %d ms\n", | 
|  | downdelay, miimon, | 
|  | (downdelay / miimon) * miimon); | 
|  | } | 
|  |  | 
|  | downdelay /= miimon; | 
|  | } | 
|  |  | 
|  | if (arp_interval < 0) { | 
|  | pr_warn("Warning: arp_interval module parameter (%d), not in range 0-%d, so it was reset to 0\n", | 
|  | arp_interval, INT_MAX); | 
|  | arp_interval = 0; | 
|  | } | 
|  |  | 
|  | for (arp_ip_count = 0, i = 0; | 
|  | (arp_ip_count < BOND_MAX_ARP_TARGETS) && arp_ip_target[i]; i++) { | 
|  | __be32 ip; | 
|  |  | 
|  | /* not a complete check, but good enough to catch mistakes */ | 
|  | if (!in4_pton(arp_ip_target[i], -1, (u8 *)&ip, -1, NULL) || | 
|  | !bond_is_ip_target_ok(ip)) { | 
|  | pr_warn("Warning: bad arp_ip_target module parameter (%s), ARP monitoring will not be performed\n", | 
|  | arp_ip_target[i]); | 
|  | arp_interval = 0; | 
|  | } else { | 
|  | if (bond_get_targets_ip(arp_target, ip) == -1) | 
|  | arp_target[arp_ip_count++] = ip; | 
|  | else | 
|  | pr_warn("Warning: duplicate address %pI4 in arp_ip_target, skipping\n", | 
|  | &ip); | 
|  | } | 
|  | } | 
|  |  | 
|  | if (arp_interval && !arp_ip_count) { | 
|  | /* don't allow arping if no arp_ip_target given... */ | 
|  | pr_warn("Warning: arp_interval module parameter (%d) specified without providing an arp_ip_target parameter, arp_interval was reset to 0\n", | 
|  | arp_interval); | 
|  | arp_interval = 0; | 
|  | } | 
|  |  | 
|  | if (arp_validate) { | 
|  | if (!arp_interval) { | 
|  | pr_err("arp_validate requires arp_interval\n"); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | bond_opt_initstr(&newval, arp_validate); | 
|  | valptr = bond_opt_parse(bond_opt_get(BOND_OPT_ARP_VALIDATE), | 
|  | &newval); | 
|  | if (!valptr) { | 
|  | pr_err("Error: invalid arp_validate \"%s\"\n", | 
|  | arp_validate); | 
|  | return -EINVAL; | 
|  | } | 
|  | arp_validate_value = valptr->value; | 
|  | } else { | 
|  | arp_validate_value = 0; | 
|  | } | 
|  |  | 
|  | if (arp_all_targets) { | 
|  | bond_opt_initstr(&newval, arp_all_targets); | 
|  | valptr = bond_opt_parse(bond_opt_get(BOND_OPT_ARP_ALL_TARGETS), | 
|  | &newval); | 
|  | if (!valptr) { | 
|  | pr_err("Error: invalid arp_all_targets_value \"%s\"\n", | 
|  | arp_all_targets); | 
|  | arp_all_targets_value = 0; | 
|  | } else { | 
|  | arp_all_targets_value = valptr->value; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (miimon) { | 
|  | pr_info("MII link monitoring set to %d ms\n", miimon); | 
|  | } else if (arp_interval) { | 
|  | valptr = bond_opt_get_val(BOND_OPT_ARP_VALIDATE, | 
|  | arp_validate_value); | 
|  | pr_info("ARP monitoring set to %d ms, validate %s, with %d target(s):", | 
|  | arp_interval, valptr->string, arp_ip_count); | 
|  |  | 
|  | for (i = 0; i < arp_ip_count; i++) | 
|  | pr_cont(" %s", arp_ip_target[i]); | 
|  |  | 
|  | pr_cont("\n"); | 
|  |  | 
|  | } else if (max_bonds) { | 
|  | /* miimon and arp_interval not set, we need one so things | 
|  | * work as expected, see bonding.txt for details | 
|  | */ | 
|  | pr_debug("Warning: either miimon or arp_interval and arp_ip_target module parameters must be specified, otherwise bonding will not detect link failures! see bonding.txt for details\n"); | 
|  | } | 
|  |  | 
|  | if (primary && !bond_mode_uses_primary(bond_mode)) { | 
|  | /* currently, using a primary only makes sense | 
|  | * in active backup, TLB or ALB modes | 
|  | */ | 
|  | pr_warn("Warning: %s primary device specified but has no effect in %s mode\n", | 
|  | primary, bond_mode_name(bond_mode)); | 
|  | primary = NULL; | 
|  | } | 
|  |  | 
|  | if (primary && primary_reselect) { | 
|  | bond_opt_initstr(&newval, primary_reselect); | 
|  | valptr = bond_opt_parse(bond_opt_get(BOND_OPT_PRIMARY_RESELECT), | 
|  | &newval); | 
|  | if (!valptr) { | 
|  | pr_err("Error: Invalid primary_reselect \"%s\"\n", | 
|  | primary_reselect); | 
|  | return -EINVAL; | 
|  | } | 
|  | primary_reselect_value = valptr->value; | 
|  | } else { | 
|  | primary_reselect_value = BOND_PRI_RESELECT_ALWAYS; | 
|  | } | 
|  |  | 
|  | if (fail_over_mac) { | 
|  | bond_opt_initstr(&newval, fail_over_mac); | 
|  | valptr = bond_opt_parse(bond_opt_get(BOND_OPT_FAIL_OVER_MAC), | 
|  | &newval); | 
|  | if (!valptr) { | 
|  | pr_err("Error: invalid fail_over_mac \"%s\"\n", | 
|  | fail_over_mac); | 
|  | return -EINVAL; | 
|  | } | 
|  | fail_over_mac_value = valptr->value; | 
|  | if (bond_mode != BOND_MODE_ACTIVEBACKUP) | 
|  | pr_warn("Warning: fail_over_mac only affects active-backup mode\n"); | 
|  | } else { | 
|  | fail_over_mac_value = BOND_FOM_NONE; | 
|  | } | 
|  |  | 
|  | bond_opt_initstr(&newval, "default"); | 
|  | valptr = bond_opt_parse( | 
|  | bond_opt_get(BOND_OPT_AD_ACTOR_SYS_PRIO), | 
|  | &newval); | 
|  | if (!valptr) { | 
|  | pr_err("Error: No ad_actor_sys_prio default value"); | 
|  | return -EINVAL; | 
|  | } | 
|  | ad_actor_sys_prio = valptr->value; | 
|  |  | 
|  | valptr = bond_opt_parse(bond_opt_get(BOND_OPT_AD_USER_PORT_KEY), | 
|  | &newval); | 
|  | if (!valptr) { | 
|  | pr_err("Error: No ad_user_port_key default value"); | 
|  | return -EINVAL; | 
|  | } | 
|  | ad_user_port_key = valptr->value; | 
|  |  | 
|  | bond_opt_initstr(&newval, "default"); | 
|  | valptr = bond_opt_parse(bond_opt_get(BOND_OPT_TLB_DYNAMIC_LB), &newval); | 
|  | if (!valptr) { | 
|  | pr_err("Error: No tlb_dynamic_lb default value"); | 
|  | return -EINVAL; | 
|  | } | 
|  | tlb_dynamic_lb = valptr->value; | 
|  |  | 
|  | if (lp_interval == 0) { | 
|  | pr_warn("Warning: ip_interval must be between 1 and %d, so it was reset to %d\n", | 
|  | INT_MAX, BOND_ALB_DEFAULT_LP_INTERVAL); | 
|  | lp_interval = BOND_ALB_DEFAULT_LP_INTERVAL; | 
|  | } | 
|  |  | 
|  | /* fill params struct with the proper values */ | 
|  | params->mode = bond_mode; | 
|  | params->xmit_policy = xmit_hashtype; | 
|  | params->miimon = miimon; | 
|  | params->num_peer_notif = num_peer_notif; | 
|  | params->arp_interval = arp_interval; | 
|  | params->arp_validate = arp_validate_value; | 
|  | params->arp_all_targets = arp_all_targets_value; | 
|  | params->missed_max = 2; | 
|  | params->updelay = updelay; | 
|  | params->downdelay = downdelay; | 
|  | params->peer_notif_delay = 0; | 
|  | params->use_carrier = use_carrier; | 
|  | params->lacp_active = 1; | 
|  | params->lacp_fast = lacp_fast; | 
|  | params->primary[0] = 0; | 
|  | params->primary_reselect = primary_reselect_value; | 
|  | params->fail_over_mac = fail_over_mac_value; | 
|  | params->tx_queues = tx_queues; | 
|  | params->all_slaves_active = all_slaves_active; | 
|  | params->resend_igmp = resend_igmp; | 
|  | params->min_links = min_links; | 
|  | params->lp_interval = lp_interval; | 
|  | params->packets_per_slave = packets_per_slave; | 
|  | params->tlb_dynamic_lb = tlb_dynamic_lb; | 
|  | params->ad_actor_sys_prio = ad_actor_sys_prio; | 
|  | eth_zero_addr(params->ad_actor_system); | 
|  | params->ad_user_port_key = ad_user_port_key; | 
|  | if (packets_per_slave > 0) { | 
|  | params->reciprocal_packets_per_slave = | 
|  | reciprocal_value(packets_per_slave); | 
|  | } else { | 
|  | /* reciprocal_packets_per_slave is unused if | 
|  | * packets_per_slave is 0 or 1, just initialize it | 
|  | */ | 
|  | params->reciprocal_packets_per_slave = | 
|  | (struct reciprocal_value) { 0 }; | 
|  | } | 
|  |  | 
|  | if (primary) | 
|  | strscpy_pad(params->primary, primary, sizeof(params->primary)); | 
|  |  | 
|  | memcpy(params->arp_targets, arp_target, sizeof(arp_target)); | 
|  | #if IS_ENABLED(CONFIG_IPV6) | 
|  | memset(params->ns_targets, 0, sizeof(struct in6_addr) * BOND_MAX_NS_TARGETS); | 
|  | #endif | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* Called from registration process */ | 
|  | static int bond_init(struct net_device *bond_dev) | 
|  | { | 
|  | struct bonding *bond = netdev_priv(bond_dev); | 
|  | struct bond_net *bn = net_generic(dev_net(bond_dev), bond_net_id); | 
|  |  | 
|  | netdev_dbg(bond_dev, "Begin bond_init\n"); | 
|  |  | 
|  | bond->wq = alloc_ordered_workqueue(bond_dev->name, WQ_MEM_RECLAIM); | 
|  | if (!bond->wq) | 
|  | return -ENOMEM; | 
|  |  | 
|  | bond->notifier_ctx = false; | 
|  |  | 
|  | spin_lock_init(&bond->stats_lock); | 
|  | netdev_lockdep_set_classes(bond_dev); | 
|  |  | 
|  | list_add_tail(&bond->bond_list, &bn->dev_list); | 
|  |  | 
|  | bond_prepare_sysfs_group(bond); | 
|  |  | 
|  | bond_debug_register(bond); | 
|  |  | 
|  | /* Ensure valid dev_addr */ | 
|  | if (is_zero_ether_addr(bond_dev->dev_addr) && | 
|  | bond_dev->addr_assign_type == NET_ADDR_PERM) | 
|  | eth_hw_addr_random(bond_dev); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | unsigned int bond_get_num_tx_queues(void) | 
|  | { | 
|  | return tx_queues; | 
|  | } | 
|  |  | 
|  | /* Create a new bond based on the specified name and bonding parameters. | 
|  | * If name is NULL, obtain a suitable "bond%d" name for us. | 
|  | * Caller must NOT hold rtnl_lock; we need to release it here before we | 
|  | * set up our sysfs entries. | 
|  | */ | 
|  | int bond_create(struct net *net, const char *name) | 
|  | { | 
|  | struct net_device *bond_dev; | 
|  | struct bonding *bond; | 
|  | int res = -ENOMEM; | 
|  |  | 
|  | rtnl_lock(); | 
|  |  | 
|  | bond_dev = alloc_netdev_mq(sizeof(struct bonding), | 
|  | name ? name : "bond%d", NET_NAME_UNKNOWN, | 
|  | bond_setup, tx_queues); | 
|  | if (!bond_dev) | 
|  | goto out; | 
|  |  | 
|  | bond = netdev_priv(bond_dev); | 
|  | dev_net_set(bond_dev, net); | 
|  | bond_dev->rtnl_link_ops = &bond_link_ops; | 
|  |  | 
|  | res = register_netdevice(bond_dev); | 
|  | if (res < 0) { | 
|  | free_netdev(bond_dev); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | netif_carrier_off(bond_dev); | 
|  |  | 
|  | bond_work_init_all(bond); | 
|  |  | 
|  | out: | 
|  | rtnl_unlock(); | 
|  | return res; | 
|  | } | 
|  |  | 
|  | static int __net_init bond_net_init(struct net *net) | 
|  | { | 
|  | struct bond_net *bn = net_generic(net, bond_net_id); | 
|  |  | 
|  | bn->net = net; | 
|  | INIT_LIST_HEAD(&bn->dev_list); | 
|  |  | 
|  | bond_create_proc_dir(bn); | 
|  | bond_create_sysfs(bn); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void __net_exit bond_net_exit_batch(struct list_head *net_list) | 
|  | { | 
|  | struct bond_net *bn; | 
|  | struct net *net; | 
|  | LIST_HEAD(list); | 
|  |  | 
|  | list_for_each_entry(net, net_list, exit_list) { | 
|  | bn = net_generic(net, bond_net_id); | 
|  | bond_destroy_sysfs(bn); | 
|  | } | 
|  |  | 
|  | /* Kill off any bonds created after unregistering bond rtnl ops */ | 
|  | rtnl_lock(); | 
|  | list_for_each_entry(net, net_list, exit_list) { | 
|  | struct bonding *bond, *tmp_bond; | 
|  |  | 
|  | bn = net_generic(net, bond_net_id); | 
|  | list_for_each_entry_safe(bond, tmp_bond, &bn->dev_list, bond_list) | 
|  | unregister_netdevice_queue(bond->dev, &list); | 
|  | } | 
|  | unregister_netdevice_many(&list); | 
|  | rtnl_unlock(); | 
|  |  | 
|  | list_for_each_entry(net, net_list, exit_list) { | 
|  | bn = net_generic(net, bond_net_id); | 
|  | bond_destroy_proc_dir(bn); | 
|  | } | 
|  | } | 
|  |  | 
|  | static struct pernet_operations bond_net_ops = { | 
|  | .init = bond_net_init, | 
|  | .exit_batch = bond_net_exit_batch, | 
|  | .id   = &bond_net_id, | 
|  | .size = sizeof(struct bond_net), | 
|  | }; | 
|  |  | 
|  | static int __init bonding_init(void) | 
|  | { | 
|  | int i; | 
|  | int res; | 
|  |  | 
|  | res = bond_check_params(&bonding_defaults); | 
|  | if (res) | 
|  | goto out; | 
|  |  | 
|  | res = register_pernet_subsys(&bond_net_ops); | 
|  | if (res) | 
|  | goto out; | 
|  |  | 
|  | res = bond_netlink_init(); | 
|  | if (res) | 
|  | goto err_link; | 
|  |  | 
|  | bond_create_debugfs(); | 
|  |  | 
|  | for (i = 0; i < max_bonds; i++) { | 
|  | res = bond_create(&init_net, NULL); | 
|  | if (res) | 
|  | goto err; | 
|  | } | 
|  |  | 
|  | skb_flow_dissector_init(&flow_keys_bonding, | 
|  | flow_keys_bonding_keys, | 
|  | ARRAY_SIZE(flow_keys_bonding_keys)); | 
|  |  | 
|  | register_netdevice_notifier(&bond_netdev_notifier); | 
|  | out: | 
|  | return res; | 
|  | err: | 
|  | bond_destroy_debugfs(); | 
|  | bond_netlink_fini(); | 
|  | err_link: | 
|  | unregister_pernet_subsys(&bond_net_ops); | 
|  | goto out; | 
|  |  | 
|  | } | 
|  |  | 
|  | static void __exit bonding_exit(void) | 
|  | { | 
|  | unregister_netdevice_notifier(&bond_netdev_notifier); | 
|  |  | 
|  | bond_destroy_debugfs(); | 
|  |  | 
|  | bond_netlink_fini(); | 
|  | unregister_pernet_subsys(&bond_net_ops); | 
|  |  | 
|  | #ifdef CONFIG_NET_POLL_CONTROLLER | 
|  | /* Make sure we don't have an imbalance on our netpoll blocking */ | 
|  | WARN_ON(atomic_read(&netpoll_block_tx)); | 
|  | #endif | 
|  | } | 
|  |  | 
|  | module_init(bonding_init); | 
|  | module_exit(bonding_exit); | 
|  | MODULE_LICENSE("GPL"); | 
|  | MODULE_DESCRIPTION(DRV_DESCRIPTION); | 
|  | MODULE_AUTHOR("Thomas Davis, tadavis@lbl.gov and many others"); |