|  | // SPDX-License-Identifier: GPL-2.0 | 
|  | /dts-v1/; | 
|  |  | 
|  | #include "microAptiv.dtsi" | 
|  |  | 
|  | / { | 
|  | compatible = "digilent,nexys4ddr"; | 
|  |  | 
|  | aliases { | 
|  | serial0 = &axi_uart16550; | 
|  | }; | 
|  | chosen { | 
|  | bootargs = "console=ttyS0,115200"; | 
|  | stdout-path = "serial0:115200n8"; | 
|  | }; | 
|  |  | 
|  | memory { | 
|  | device_type = "memory"; | 
|  | reg = <0x0 0x08000000>; | 
|  | }; | 
|  |  | 
|  | cpuintc: interrupt-controller { | 
|  | #address-cells = <0>; | 
|  | #interrupt-cells = <1>; | 
|  | interrupt-controller; | 
|  | compatible = "mti,cpu-interrupt-controller"; | 
|  | }; | 
|  |  | 
|  | axi_intc: interrupt-controller@10200000 { | 
|  | #interrupt-cells = <1>; | 
|  | compatible = "xlnx,xps-intc-1.00.a"; | 
|  | interrupt-controller; | 
|  | reg = <0x10200000 0x10000>; | 
|  | xlnx,kind-of-intr = <0x0>; | 
|  | xlnx,num-intr-inputs = <0x6>; | 
|  |  | 
|  | interrupt-parent = <&cpuintc>; | 
|  | interrupts = <6>; | 
|  | }; | 
|  |  | 
|  | axi_gpio: gpio@10600000 { | 
|  | #gpio-cells = <1>; | 
|  | compatible = "xlnx,xps-gpio-1.00.a"; | 
|  | gpio-controller; | 
|  | reg = <0x10600000 0x10000>; | 
|  | xlnx,all-inputs = <0x0>; | 
|  | xlnx,dout-default = <0x0>; | 
|  | xlnx,gpio-width = <0x16>; | 
|  | xlnx,interrupt-present = <0x0>; | 
|  | xlnx,is-dual = <0x0>; | 
|  | xlnx,tri-default = <0xffffffff>; | 
|  | } ; | 
|  |  | 
|  | axi_ethernetlite: ethernet@10e00000 { | 
|  | compatible = "xlnx,xps-ethernetlite-3.00.a"; | 
|  | device_type = "network"; | 
|  | interrupt-parent = <&axi_intc>; | 
|  | interrupts = <1>; | 
|  | phy-handle = <&phy0>; | 
|  | reg = <0x10e00000 0x10000>; | 
|  | xlnx,duplex = <0x1>; | 
|  | xlnx,include-global-buffers = <0x1>; | 
|  | xlnx,include-internal-loopback = <0x0>; | 
|  | xlnx,include-mdio = <0x1>; | 
|  | xlnx,instance = "axi_ethernetlite_inst"; | 
|  | xlnx,rx-ping-pong = <0x1>; | 
|  | xlnx,s-axi-id-width = <0x1>; | 
|  | xlnx,tx-ping-pong = <0x1>; | 
|  | xlnx,use-internal = <0x0>; | 
|  | mdio { | 
|  | #address-cells = <1>; | 
|  | #size-cells = <0>; | 
|  | phy0: phy@1 { | 
|  | device_type = "ethernet-phy"; | 
|  | reg = <1>; | 
|  | }; | 
|  | }; | 
|  | }; | 
|  |  | 
|  | axi_uart16550: serial@10400000 { | 
|  | compatible = "ns16550a"; | 
|  | reg = <0x10400000 0x10000>; | 
|  |  | 
|  | reg-shift = <2>; | 
|  | reg-offset = <0x1000>; | 
|  |  | 
|  | clocks	= <&ext>; | 
|  |  | 
|  | interrupt-parent = <&axi_intc>; | 
|  | interrupts = <0>; | 
|  | }; | 
|  |  | 
|  | axi_i2c: i2c@10a00000 { | 
|  | compatible = "xlnx,xps-iic-2.00.a"; | 
|  | interrupt-parent = <&axi_intc>; | 
|  | interrupts = <4>; | 
|  | reg = < 0x10a00000 0x10000 >; | 
|  | clocks = <&ext>; | 
|  | xlnx,clk-freq = <0x5f5e100>; | 
|  | xlnx,family = "Artix7"; | 
|  | xlnx,gpo-width = <0x1>; | 
|  | xlnx,iic-freq = <0x186a0>; | 
|  | xlnx,scl-inertial-delay = <0x0>; | 
|  | xlnx,sda-inertial-delay = <0x0>; | 
|  | xlnx,ten-bit-adr = <0x0>; | 
|  | #address-cells = <1>; | 
|  | #size-cells = <0>; | 
|  |  | 
|  | ad7420@4b { | 
|  | compatible = "adi,adt7420"; | 
|  | reg = <0x4b>; | 
|  | }; | 
|  | } ; | 
|  | }; | 
|  |  | 
|  | &ext { | 
|  | clock-frequency = <50000000>; | 
|  | }; |