| # SPDX-License-Identifier: GPL-2.0-only | 
 |  | 
 | ifeq ($(src-perf),) | 
 | src-perf := $(srctree)/tools/perf | 
 | endif | 
 |  | 
 | ifeq ($(obj-perf),) | 
 | obj-perf := $(OUTPUT) | 
 | endif | 
 |  | 
 | ifneq ($(obj-perf),) | 
 | obj-perf := $(abspath $(obj-perf))/ | 
 | endif | 
 |  | 
 | $(shell printf "" > $(OUTPUT).config-detected) | 
 | detected     = $(shell echo "$(1)=y"       >> $(OUTPUT).config-detected) | 
 | detected_var = $(shell echo "$(1)=$($(1))" >> $(OUTPUT).config-detected) | 
 |  | 
 | CFLAGS := $(EXTRA_CFLAGS) $(filter-out -Wnested-externs,$(EXTRA_WARNINGS)) | 
 | HOSTCFLAGS := $(filter-out -Wnested-externs,$(EXTRA_WARNINGS)) | 
 |  | 
 | # Enabled Wthread-safety analysis for clang builds. | 
 | ifeq ($(CC_NO_CLANG), 0) | 
 |   CFLAGS += -Wthread-safety | 
 | endif | 
 |  | 
 | include $(srctree)/tools/scripts/Makefile.arch | 
 |  | 
 | $(call detected_var,SRCARCH) | 
 |  | 
 | ifneq ($(NO_SYSCALL_TABLE),1) | 
 |   NO_SYSCALL_TABLE := 1 | 
 |  | 
 |   ifeq ($(SRCARCH),x86) | 
 |     ifeq (${IS_64_BIT}, 1) | 
 |       NO_SYSCALL_TABLE := 0 | 
 |     endif | 
 |   else | 
 |     ifeq ($(SRCARCH),$(filter $(SRCARCH),powerpc arm64 s390 mips loongarch)) | 
 |       NO_SYSCALL_TABLE := 0 | 
 |     endif | 
 |   endif | 
 |  | 
 |   ifneq ($(NO_SYSCALL_TABLE),1) | 
 |     CFLAGS += -DHAVE_SYSCALL_TABLE_SUPPORT | 
 |   endif | 
 | endif | 
 |  | 
 | # Additional ARCH settings for ppc | 
 | ifeq ($(SRCARCH),powerpc) | 
 |   CFLAGS += -I$(OUTPUT)arch/powerpc/include/generated | 
 |   LIBUNWIND_LIBS := -lunwind -lunwind-ppc64 | 
 | endif | 
 |  | 
 | # Additional ARCH settings for x86 | 
 | ifeq ($(SRCARCH),x86) | 
 |   $(call detected,CONFIG_X86) | 
 |   ifeq (${IS_64_BIT}, 1) | 
 |     CFLAGS += -DHAVE_ARCH_X86_64_SUPPORT -I$(OUTPUT)arch/x86/include/generated | 
 |     ARCH_INCLUDE = ../../arch/x86/lib/memcpy_64.S ../../arch/x86/lib/memset_64.S | 
 |     LIBUNWIND_LIBS = -lunwind-x86_64 -lunwind -llzma | 
 |     $(call detected,CONFIG_X86_64) | 
 |   else | 
 |     LIBUNWIND_LIBS = -lunwind-x86 -llzma -lunwind | 
 |   endif | 
 | endif | 
 |  | 
 | ifeq ($(SRCARCH),arm) | 
 |   LIBUNWIND_LIBS = -lunwind -lunwind-arm | 
 | endif | 
 |  | 
 | ifeq ($(SRCARCH),arm64) | 
 |   CFLAGS += -I$(OUTPUT)arch/arm64/include/generated | 
 |   LIBUNWIND_LIBS = -lunwind -lunwind-aarch64 | 
 | endif | 
 |  | 
 | ifeq ($(SRCARCH),loongarch) | 
 |   CFLAGS += -I$(OUTPUT)arch/loongarch/include/generated | 
 |   LIBUNWIND_LIBS = -lunwind -lunwind-loongarch64 | 
 | endif | 
 |  | 
 | ifeq ($(ARCH),s390) | 
 |   CFLAGS += -fPIC -I$(OUTPUT)arch/s390/include/generated | 
 | endif | 
 |  | 
 | ifeq ($(ARCH),mips) | 
 |   CFLAGS += -I$(OUTPUT)arch/mips/include/generated | 
 |   LIBUNWIND_LIBS = -lunwind -lunwind-mips | 
 | endif | 
 |  | 
 | # So far there's only x86 and arm libdw unwind support merged in perf. | 
 | # Disable it on all other architectures in case libdw unwind | 
 | # support is detected in system. Add supported architectures | 
 | # to the check. | 
 | ifneq ($(SRCARCH),$(filter $(SRCARCH),x86 arm arm64 powerpc s390 csky riscv loongarch)) | 
 |   NO_LIBDW_DWARF_UNWIND := 1 | 
 | endif | 
 |  | 
 | ifeq ($(LIBUNWIND_LIBS),) | 
 |   NO_LIBUNWIND := 1 | 
 | endif | 
 | # | 
 | # For linking with debug library, run like: | 
 | # | 
 | #   make DEBUG=1 LIBUNWIND_DIR=/opt/libunwind/ | 
 | # | 
 |  | 
 | libunwind_arch_set_flags = $(eval $(libunwind_arch_set_flags_code)) | 
 | define libunwind_arch_set_flags_code | 
 |   FEATURE_CHECK_CFLAGS-libunwind-$(1)  = -I$(LIBUNWIND_DIR)/include | 
 |   FEATURE_CHECK_LDFLAGS-libunwind-$(1) = -L$(LIBUNWIND_DIR)/lib | 
 | endef | 
 |  | 
 | ifdef LIBUNWIND_DIR | 
 |   LIBUNWIND_CFLAGS  = -I$(LIBUNWIND_DIR)/include | 
 |   LIBUNWIND_LDFLAGS = -L$(LIBUNWIND_DIR)/lib | 
 |   LIBUNWIND_ARCHS = x86 x86_64 arm aarch64 debug-frame-arm debug-frame-aarch64 loongarch | 
 |   $(foreach libunwind_arch,$(LIBUNWIND_ARCHS),$(call libunwind_arch_set_flags,$(libunwind_arch))) | 
 | endif | 
 |  | 
 | # Set per-feature check compilation flags | 
 | FEATURE_CHECK_CFLAGS-libunwind = $(LIBUNWIND_CFLAGS) | 
 | FEATURE_CHECK_LDFLAGS-libunwind = $(LIBUNWIND_LDFLAGS) $(LIBUNWIND_LIBS) | 
 | FEATURE_CHECK_CFLAGS-libunwind-debug-frame = $(LIBUNWIND_CFLAGS) | 
 | FEATURE_CHECK_LDFLAGS-libunwind-debug-frame = $(LIBUNWIND_LDFLAGS) $(LIBUNWIND_LIBS) | 
 |  | 
 | FEATURE_CHECK_LDFLAGS-libunwind-arm += -lunwind -lunwind-arm | 
 | FEATURE_CHECK_LDFLAGS-libunwind-aarch64 += -lunwind -lunwind-aarch64 | 
 | FEATURE_CHECK_LDFLAGS-libunwind-x86 += -lunwind -llzma -lunwind-x86 | 
 | FEATURE_CHECK_LDFLAGS-libunwind-x86_64 += -lunwind -llzma -lunwind-x86_64 | 
 |  | 
 | FEATURE_CHECK_LDFLAGS-libcrypto = -lcrypto | 
 |  | 
 | ifdef CSINCLUDES | 
 |   LIBOPENCSD_CFLAGS := -I$(CSINCLUDES) | 
 | endif | 
 | OPENCSDLIBS := -lopencsd_c_api -lopencsd | 
 | ifeq ($(findstring -static,${LDFLAGS}),-static) | 
 |   OPENCSDLIBS += -lstdc++ | 
 | endif | 
 | ifdef CSLIBS | 
 |   LIBOPENCSD_LDFLAGS := -L$(CSLIBS) | 
 | endif | 
 | FEATURE_CHECK_CFLAGS-libopencsd := $(LIBOPENCSD_CFLAGS) | 
 | FEATURE_CHECK_LDFLAGS-libopencsd := $(LIBOPENCSD_LDFLAGS) $(OPENCSDLIBS) | 
 |  | 
 | # for linking with debug library, run like: | 
 | # make DEBUG=1 LIBDW_DIR=/opt/libdw/ | 
 | ifdef LIBDW_DIR | 
 |   LIBDW_CFLAGS  := -I$(LIBDW_DIR)/include | 
 |   LIBDW_LDFLAGS := -L$(LIBDW_DIR)/lib | 
 | endif | 
 | DWARFLIBS := -ldw | 
 | ifeq ($(findstring -static,${LDFLAGS}),-static) | 
 |   DWARFLIBS += -lelf -lz -llzma -lbz2 -lzstd | 
 |  | 
 |   LIBDW_VERSION := $(shell $(PKG_CONFIG) --modversion libdw).0.0 | 
 |   LIBDW_VERSION_1 := $(word 1, $(subst ., ,$(LIBDW_VERSION))) | 
 |   LIBDW_VERSION_2 := $(word 2, $(subst ., ,$(LIBDW_VERSION))) | 
 |  | 
 |   # Elfutils merged libebl.a into libdw.a starting from version 0.177, | 
 |   # Link libebl.a only if libdw is older than this version. | 
 |   ifeq ($(shell test $(LIBDW_VERSION_2) -lt 177; echo $$?),0) | 
 |     DWARFLIBS += -lebl | 
 |   endif | 
 |  | 
 |   # Must put -ldl after -lebl for dependency | 
 |   DWARFLIBS += -ldl | 
 | endif | 
 | FEATURE_CHECK_CFLAGS-libdw-dwarf-unwind := $(LIBDW_CFLAGS) | 
 | FEATURE_CHECK_LDFLAGS-libdw-dwarf-unwind := $(LIBDW_LDFLAGS) $(DWARFLIBS) | 
 |  | 
 | # for linking with debug library, run like: | 
 | # make DEBUG=1 LIBBABELTRACE_DIR=/opt/libbabeltrace/ | 
 | ifdef LIBBABELTRACE_DIR | 
 |   LIBBABELTRACE_CFLAGS  := -I$(LIBBABELTRACE_DIR)/include | 
 |   LIBBABELTRACE_LDFLAGS := -L$(LIBBABELTRACE_DIR)/lib | 
 | endif | 
 | FEATURE_CHECK_CFLAGS-libbabeltrace := $(LIBBABELTRACE_CFLAGS) | 
 | FEATURE_CHECK_LDFLAGS-libbabeltrace := $(LIBBABELTRACE_LDFLAGS) -lbabeltrace-ctf | 
 |  | 
 | # for linking with debug library, run like: | 
 | # make DEBUG=1 LIBCAPSTONE_DIR=/opt/capstone/ | 
 | ifdef LIBCAPSTONE_DIR | 
 |   LIBCAPSTONE_CFLAGS  := -I$(LIBCAPSTONE_DIR)/include | 
 |   LIBCAPSTONE_LDFLAGS := -L$(LIBCAPSTONE_DIR)/ | 
 | endif | 
 | FEATURE_CHECK_CFLAGS-libcapstone := $(LIBCAPSTONE_CFLAGS) | 
 | FEATURE_CHECK_LDFLAGS-libcapstone := $(LIBCAPSTONE_LDFLAGS) -lcapstone | 
 |  | 
 | ifdef LIBZSTD_DIR | 
 |   LIBZSTD_CFLAGS  := -I$(LIBZSTD_DIR)/lib | 
 |   LIBZSTD_LDFLAGS := -L$(LIBZSTD_DIR)/lib | 
 | endif | 
 | FEATURE_CHECK_CFLAGS-libzstd := $(LIBZSTD_CFLAGS) | 
 | FEATURE_CHECK_LDFLAGS-libzstd := $(LIBZSTD_LDFLAGS) | 
 |  | 
 | # for linking with debug library, run like: | 
 | # make DEBUG=1 PKG_CONFIG_PATH=/opt/libtraceevent/(lib|lib64)/pkgconfig | 
 |  | 
 | ifneq ($(NO_LIBTRACEEVENT),1) | 
 |   ifeq ($(call get-executable,$(PKG_CONFIG)),) | 
 |     $(error Error: $(PKG_CONFIG) needed by libtraceevent is missing on this system, please install it) | 
 |   endif | 
 | endif | 
 |  | 
 | FEATURE_CHECK_CFLAGS-bpf = -I. -I$(srctree)/tools/include -I$(srctree)/tools/arch/$(SRCARCH)/include/uapi -I$(srctree)/tools/include/uapi | 
 | # include ARCH specific config | 
 | -include $(src-perf)/arch/$(SRCARCH)/Makefile | 
 |  | 
 | ifdef PERF_HAVE_ARCH_REGS_QUERY_REGISTER_OFFSET | 
 |   CFLAGS += -DHAVE_ARCH_REGS_QUERY_REGISTER_OFFSET | 
 | endif | 
 |  | 
 | include $(srctree)/tools/scripts/utilities.mak | 
 |  | 
 | ifeq ($(call get-executable,$(FLEX)),) | 
 |   $(error Error: $(FLEX) is missing on this system, please install it) | 
 | endif | 
 |  | 
 | ifeq ($(call get-executable,$(BISON)),) | 
 |   $(error Error: $(BISON) is missing on this system, please install it) | 
 | endif | 
 |  | 
 | ifneq ($(OUTPUT),) | 
 |   ifeq ($(shell expr $(shell $(BISON) --version | grep bison | sed -e 's/.\+ \([0-9]\+\).\([0-9]\+\).\([0-9]\+\)/\1\2\3/g') \>\= 371), 1) | 
 |     BISON_FILE_PREFIX_MAP := --file-prefix-map=$(OUTPUT)= | 
 |   endif | 
 | endif | 
 |  | 
 | # Treat warnings as errors unless directed not to | 
 | ifneq ($(WERROR),0) | 
 |   CORE_CFLAGS += -Werror | 
 |   CXXFLAGS += -Werror | 
 |   HOSTCFLAGS += -Werror | 
 | endif | 
 |  | 
 | ifndef DEBUG | 
 |   DEBUG := 0 | 
 | endif | 
 |  | 
 | ifeq ($(DEBUG),0) | 
 | CORE_CFLAGS += -DNDEBUG=1 | 
 | ifeq ($(CC_NO_CLANG), 0) | 
 |   CORE_CFLAGS += -O3 | 
 | else | 
 |   CORE_CFLAGS += -O6 | 
 | endif | 
 | else | 
 |   CORE_CFLAGS += -g | 
 |   CXXFLAGS += -g | 
 | endif | 
 |  | 
 | ifdef PARSER_DEBUG | 
 |   PARSER_DEBUG_BISON := -t | 
 |   PARSER_DEBUG_FLEX  := -d | 
 |   CFLAGS             += -DPARSER_DEBUG | 
 |   $(call detected_var,PARSER_DEBUG_BISON) | 
 |   $(call detected_var,PARSER_DEBUG_FLEX) | 
 | endif | 
 |  | 
 | ifdef LTO | 
 |   CORE_CFLAGS += -flto | 
 |   CXXFLAGS += -flto | 
 | endif | 
 |  | 
 | # Try different combinations to accommodate systems that only have | 
 | # python[2][3]-config in weird combinations in the following order of | 
 | # priority from lowest to highest: | 
 | #   * python2-config as per pep-0394. | 
 | #   * python-config | 
 | #   * python3-config | 
 | #   * $(PYTHON)-config (If PYTHON is user supplied but PYTHON_CONFIG isn't) | 
 | # | 
 | PYTHON_AUTO := python-config | 
 | PYTHON_AUTO := $(if $(call get-executable,python2-config),python2-config,$(PYTHON_AUTO)) | 
 | PYTHON_AUTO := $(if $(call get-executable,python-config),python-config,$(PYTHON_AUTO)) | 
 | PYTHON_AUTO := $(if $(call get-executable,python3-config),python3-config,$(PYTHON_AUTO)) | 
 |  | 
 | # If PYTHON is defined but PYTHON_CONFIG isn't, then take $(PYTHON)-config as if it was the user | 
 | # supplied value for PYTHON_CONFIG. Because it's "user supplied", error out if it doesn't exist. | 
 | ifdef PYTHON | 
 |   ifndef PYTHON_CONFIG | 
 |     PYTHON_CONFIG_AUTO := $(call get-executable,$(PYTHON)-config) | 
 |     PYTHON_CONFIG := $(if $(PYTHON_CONFIG_AUTO),$(PYTHON_CONFIG_AUTO),\ | 
 |                           $(call $(error $(PYTHON)-config not found))) | 
 |   endif | 
 | endif | 
 |  | 
 | # Select either auto detected python and python-config or use user supplied values if they are | 
 | # defined. get-executable-or-default fails with an error if the first argument is supplied but | 
 | # doesn't exist. | 
 | override PYTHON_CONFIG := $(call get-executable-or-default,PYTHON_CONFIG,$(PYTHON_AUTO)) | 
 | override PYTHON := $(call get-executable-or-default,PYTHON,$(subst -config,,$(PYTHON_CONFIG))) | 
 |  | 
 | grep-libs  = $(filter -l%,$(1)) | 
 | strip-libs  = $(filter-out -l%,$(1)) | 
 |  | 
 | PYTHON_CONFIG_SQ := $(call shell-sq,$(PYTHON_CONFIG)) | 
 |  | 
 | # Python 3.8 changed the output of `python-config --ldflags` to not include the | 
 | # '-lpythonX.Y' flag unless '--embed' is also passed. The feature check for | 
 | # libpython fails if that flag is not included in LDFLAGS | 
 | ifeq ($(shell $(PYTHON_CONFIG_SQ) --ldflags --embed 2>&1 1>/dev/null; echo $$?), 0) | 
 |   PYTHON_CONFIG_LDFLAGS := --ldflags --embed | 
 | else | 
 |   PYTHON_CONFIG_LDFLAGS := --ldflags | 
 | endif | 
 |  | 
 | ifdef PYTHON_CONFIG | 
 |   PYTHON_EMBED_LDOPTS := $(shell $(PYTHON_CONFIG_SQ) $(PYTHON_CONFIG_LDFLAGS) 2>/dev/null) | 
 |   # Update the python flags for cross compilation | 
 |   ifdef CROSS_COMPILE | 
 |     PYTHON_NATIVE := $(shell echo $(PYTHON_EMBED_LDOPTS) | sed 's/\(-L.*\/\)\(.*-linux-gnu\).*/\2/') | 
 |     PYTHON_EMBED_LDOPTS := $(subst $(PYTHON_NATIVE),$(shell $(CC) -dumpmachine),$(PYTHON_EMBED_LDOPTS)) | 
 |   endif | 
 |   PYTHON_EMBED_LDFLAGS := $(call strip-libs,$(PYTHON_EMBED_LDOPTS)) | 
 |   PYTHON_EMBED_LIBADD := $(call grep-libs,$(PYTHON_EMBED_LDOPTS)) -lutil | 
 |   PYTHON_EMBED_CCOPTS := $(shell $(PYTHON_CONFIG_SQ) --includes 2>/dev/null) | 
 |   FLAGS_PYTHON_EMBED := $(PYTHON_EMBED_CCOPTS) $(PYTHON_EMBED_LDOPTS) | 
 |   ifeq ($(CC_NO_CLANG), 0) | 
 |     PYTHON_EMBED_CCOPTS := $(filter-out -ffat-lto-objects, $(PYTHON_EMBED_CCOPTS)) | 
 |   endif | 
 | endif | 
 |  | 
 | FEATURE_CHECK_CFLAGS-libpython := $(PYTHON_EMBED_CCOPTS) | 
 | FEATURE_CHECK_LDFLAGS-libpython := $(PYTHON_EMBED_LDOPTS) | 
 |  | 
 | FEATURE_CHECK_LDFLAGS-libaio = -lrt | 
 |  | 
 | FEATURE_CHECK_LDFLAGS-disassembler-four-args = -lbfd -lopcodes -ldl | 
 | FEATURE_CHECK_LDFLAGS-disassembler-init-styled = -lbfd -lopcodes -ldl | 
 |  | 
 | CORE_CFLAGS += -fno-omit-frame-pointer | 
 | CORE_CFLAGS += -Wall | 
 | CORE_CFLAGS += -Wextra | 
 | CORE_CFLAGS += -std=gnu11 | 
 |  | 
 | CXXFLAGS += -std=gnu++17 -fno-exceptions -fno-rtti | 
 | CXXFLAGS += -Wall | 
 | CXXFLAGS += -Wextra | 
 | CXXFLAGS += -fno-omit-frame-pointer | 
 |  | 
 | HOSTCFLAGS += -Wall | 
 | HOSTCFLAGS += -Wextra | 
 |  | 
 | # Enforce a non-executable stack, as we may regress (again) in the future by | 
 | # adding assembler files missing the .GNU-stack linker note. | 
 | LDFLAGS += -Wl,-z,noexecstack | 
 |  | 
 | EXTLIBS = -lpthread -lrt -lm -ldl | 
 |  | 
 | ifneq ($(TCMALLOC),) | 
 |   CFLAGS += -fno-builtin-malloc -fno-builtin-calloc -fno-builtin-realloc -fno-builtin-free | 
 |   EXTLIBS += -ltcmalloc | 
 | endif | 
 |  | 
 | ifeq ($(FEATURES_DUMP),) | 
 | # We will display at the end of this Makefile.config, using $(call feature_display_entries) | 
 | # As we may retry some feature detection here, see the disassembler-four-args case, for instance | 
 |   FEATURE_DISPLAY_DEFERRED := 1 | 
 | include $(srctree)/tools/build/Makefile.feature | 
 | else | 
 | include $(FEATURES_DUMP) | 
 | endif | 
 |  | 
 | ifeq ($(feature-stackprotector-all), 1) | 
 |   CORE_CFLAGS += -fstack-protector-all | 
 | endif | 
 |  | 
 | ifeq ($(DEBUG),0) | 
 |   ifeq ($(feature-fortify-source), 1) | 
 |     CORE_CFLAGS += -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=2 | 
 |   endif | 
 | endif | 
 |  | 
 | INC_FLAGS += -I$(src-perf)/util/include | 
 | INC_FLAGS += -I$(src-perf)/arch/$(SRCARCH)/include | 
 | INC_FLAGS += -I$(srctree)/tools/include/ | 
 | INC_FLAGS += -I$(srctree)/tools/arch/$(SRCARCH)/include/uapi | 
 | INC_FLAGS += -I$(srctree)/tools/include/uapi | 
 | INC_FLAGS += -I$(srctree)/tools/arch/$(SRCARCH)/include/ | 
 | INC_FLAGS += -I$(srctree)/tools/arch/$(SRCARCH)/ | 
 |  | 
 | # $(obj-perf)      for generated common-cmds.h | 
 | # $(obj-perf)/util for generated bison/flex headers | 
 | ifneq ($(OUTPUT),) | 
 | INC_FLAGS += -I$(obj-perf)/util | 
 | INC_FLAGS += -I$(obj-perf) | 
 | endif | 
 |  | 
 | INC_FLAGS += -I$(src-perf)/util | 
 | INC_FLAGS += -I$(src-perf) | 
 |  | 
 | CORE_CFLAGS += -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_GNU_SOURCE | 
 |  | 
 | CFLAGS   += $(CORE_CFLAGS) $(INC_FLAGS) | 
 | CXXFLAGS += $(INC_FLAGS) | 
 |  | 
 | LIBPERF_CFLAGS := $(CORE_CFLAGS) $(EXTRA_CFLAGS) | 
 |  | 
 | ifeq ($(feature-pthread-attr-setaffinity-np), 1) | 
 |   CFLAGS += -DHAVE_PTHREAD_ATTR_SETAFFINITY_NP | 
 | endif | 
 |  | 
 | ifeq ($(feature-pthread-barrier), 1) | 
 |   CFLAGS += -DHAVE_PTHREAD_BARRIER | 
 | endif | 
 |  | 
 | ifndef NO_BIONIC | 
 |   $(call feature_check,bionic) | 
 |   ifeq ($(feature-bionic), 1) | 
 |     BIONIC := 1 | 
 |     CFLAGS += -DLACKS_SIGQUEUE_PROTOTYPE | 
 |     CFLAGS += -DLACKS_OPEN_MEMSTREAM_PROTOTYPE | 
 |     EXTLIBS := $(filter-out -lrt,$(EXTLIBS)) | 
 |     EXTLIBS := $(filter-out -lpthread,$(EXTLIBS)) | 
 |   endif | 
 | endif | 
 |  | 
 | ifeq ($(feature-eventfd), 1) | 
 |   CFLAGS += -DHAVE_EVENTFD_SUPPORT | 
 | endif | 
 |  | 
 | ifeq ($(feature-get_current_dir_name), 1) | 
 |   CFLAGS += -DHAVE_GET_CURRENT_DIR_NAME | 
 | endif | 
 |  | 
 | ifeq ($(feature-gettid), 1) | 
 |   CFLAGS += -DHAVE_GETTID | 
 | endif | 
 |  | 
 | ifeq ($(feature-file-handle), 1) | 
 |   CFLAGS += -DHAVE_FILE_HANDLE | 
 | endif | 
 |  | 
 | ifdef NO_LIBELF | 
 |   NO_DWARF := 1 | 
 |   NO_LIBUNWIND := 1 | 
 |   NO_LIBDW_DWARF_UNWIND := 1 | 
 |   NO_LIBBPF := 1 | 
 |   NO_JVMTI := 1 | 
 | else | 
 |   ifeq ($(feature-libelf), 0) | 
 |     ifeq ($(feature-glibc), 1) | 
 |       LIBC_SUPPORT := 1 | 
 |     endif | 
 |     ifeq ($(BIONIC),1) | 
 |       LIBC_SUPPORT := 1 | 
 |     endif | 
 |     ifeq ($(LIBC_SUPPORT),1) | 
 |       $(error ERROR: No libelf found. Disables 'probe' tool, jvmti and BPF support. Please install libelf-dev, libelf-devel, elfutils-libelf-devel or build with NO_LIBELF=1.) | 
 |     else | 
 |       ifneq ($(filter s% -fsanitize=address%,$(EXTRA_CFLAGS),),) | 
 |         ifneq ($(shell ldconfig -p | grep libasan >/dev/null 2>&1; echo $$?), 0) | 
 |           $(error No libasan found, please install libasan) | 
 |         endif | 
 |       endif | 
 |  | 
 |       ifneq ($(filter s% -fsanitize=undefined%,$(EXTRA_CFLAGS),),) | 
 |         ifneq ($(shell ldconfig -p | grep libubsan >/dev/null 2>&1; echo $$?), 0) | 
 |           $(error No libubsan found, please install libubsan) | 
 |         endif | 
 |       endif | 
 |  | 
 |       ifneq ($(filter s% -static%,$(LDFLAGS),),) | 
 |         $(error No static glibc found, please install glibc-static) | 
 |       else | 
 |         $(error No gnu/libc-version.h found, please install glibc-dev[el]) | 
 |       endif | 
 |     endif | 
 |   else | 
 |     ifndef NO_LIBDW_DWARF_UNWIND | 
 |       ifneq ($(feature-libdw-dwarf-unwind),1) | 
 |         NO_LIBDW_DWARF_UNWIND := 1 | 
 |         $(warning No libdw DWARF unwind found, Please install elfutils-devel/libdw-dev >= 0.158 and/or set LIBDW_DIR) | 
 |       endif | 
 |     endif | 
 |     ifneq ($(feature-dwarf), 1) | 
 |       ifndef NO_DWARF | 
 |         $(warning No libdw.h found or old libdw.h found or elfutils is older than 0.138, disables dwarf support. Please install new elfutils-devel/libdw-dev) | 
 |         NO_DWARF := 1 | 
 |       endif | 
 |     else | 
 |       ifneq ($(feature-dwarf_getlocations), 1) | 
 |         $(warning Old libdw.h, finding variables at given 'perf probe' point will not work, install elfutils-devel/libdw-dev >= 0.157) | 
 |       else | 
 |         CFLAGS += -DHAVE_DWARF_GETLOCATIONS_SUPPORT | 
 |       endif # dwarf_getlocations | 
 |       ifneq ($(feature-dwarf_getcfi), 1) | 
 |         $(warning Old libdw.h, finding variables at given 'perf probe' point will not work, install elfutils-devel/libdw-dev >= 0.142) | 
 |       else | 
 |         CFLAGS += -DHAVE_DWARF_CFI_SUPPORT | 
 |       endif # dwarf_getcfi | 
 |     endif # Dwarf support | 
 |   endif # libelf support | 
 | endif # NO_LIBELF | 
 |  | 
 | ifeq ($(feature-libaio), 1) | 
 |   ifndef NO_AIO | 
 |     CFLAGS += -DHAVE_AIO_SUPPORT | 
 |   endif | 
 | endif | 
 |  | 
 | ifdef NO_DWARF | 
 |   NO_LIBDW_DWARF_UNWIND := 1 | 
 | endif | 
 |  | 
 | ifeq ($(feature-scandirat), 1) | 
 |   # Ignore having scandirat with memory sanitizer that lacks an interceptor. | 
 |   ifeq ($(filter s% -fsanitize=memory%,$(EXTRA_CFLAGS),),) | 
 |     CFLAGS += -DHAVE_SCANDIRAT_SUPPORT | 
 |   endif | 
 | endif | 
 |  | 
 | ifeq ($(feature-sched_getcpu), 1) | 
 |   CFLAGS += -DHAVE_SCHED_GETCPU_SUPPORT | 
 | endif | 
 |  | 
 | ifeq ($(feature-setns), 1) | 
 |   CFLAGS += -DHAVE_SETNS_SUPPORT | 
 |   $(call detected,CONFIG_SETNS) | 
 | endif | 
 |  | 
 | ifdef CORESIGHT | 
 |   $(call feature_check,libopencsd) | 
 |   ifeq ($(feature-libopencsd), 1) | 
 |     CFLAGS += -DHAVE_CSTRACE_SUPPORT $(LIBOPENCSD_CFLAGS) | 
 |     ifeq ($(feature-reallocarray), 0) | 
 |       CFLAGS += -DCOMPAT_NEED_REALLOCARRAY | 
 |     endif | 
 |     LDFLAGS += $(LIBOPENCSD_LDFLAGS) | 
 |     EXTLIBS += $(OPENCSDLIBS) | 
 |     $(call detected,CONFIG_LIBOPENCSD) | 
 |     ifdef CSTRACE_RAW | 
 |       CFLAGS += -DCS_DEBUG_RAW | 
 |       ifeq (${CSTRACE_RAW}, packed) | 
 |         CFLAGS += -DCS_RAW_PACKED | 
 |       endif | 
 |     endif | 
 |   else | 
 |     $(error Error: No libopencsd library found or the version is not up-to-date. Please install recent libopencsd to build with CORESIGHT=1) | 
 |   endif | 
 | endif | 
 |  | 
 | ifndef NO_ZLIB | 
 |   ifeq ($(feature-zlib), 1) | 
 |     CFLAGS += -DHAVE_ZLIB_SUPPORT | 
 |     EXTLIBS += -lz | 
 |     $(call detected,CONFIG_ZLIB) | 
 |   else | 
 |     NO_ZLIB := 1 | 
 |   endif | 
 | endif | 
 |  | 
 | ifndef NO_LIBELF | 
 |   CFLAGS += -DHAVE_LIBELF_SUPPORT | 
 |   EXTLIBS += -lelf | 
 |   $(call detected,CONFIG_LIBELF) | 
 |  | 
 |   ifeq ($(feature-libelf-getphdrnum), 1) | 
 |     CFLAGS += -DHAVE_ELF_GETPHDRNUM_SUPPORT | 
 |   endif | 
 |  | 
 |   ifeq ($(feature-libelf-gelf_getnote), 1) | 
 |     CFLAGS += -DHAVE_GELF_GETNOTE_SUPPORT | 
 |   else | 
 |     $(warning gelf_getnote() not found on libelf, SDT support disabled) | 
 |   endif | 
 |  | 
 |   ifeq ($(feature-libelf-getshdrstrndx), 1) | 
 |     CFLAGS += -DHAVE_ELF_GETSHDRSTRNDX_SUPPORT | 
 |   endif | 
 |  | 
 |   ifndef NO_LIBDEBUGINFOD | 
 |     $(call feature_check,libdebuginfod) | 
 |     ifeq ($(feature-libdebuginfod), 1) | 
 |       CFLAGS += -DHAVE_DEBUGINFOD_SUPPORT | 
 |       EXTLIBS += -ldebuginfod | 
 |     endif | 
 |   endif | 
 |  | 
 |   ifndef NO_DWARF | 
 |     ifeq ($(origin PERF_HAVE_DWARF_REGS), undefined) | 
 |       $(warning DWARF register mappings have not been defined for architecture $(SRCARCH), DWARF support disabled) | 
 |       NO_DWARF := 1 | 
 |     else | 
 |       CFLAGS += -DHAVE_DWARF_SUPPORT $(LIBDW_CFLAGS) | 
 |       LDFLAGS += $(LIBDW_LDFLAGS) | 
 |       EXTLIBS += ${DWARFLIBS} | 
 |       $(call detected,CONFIG_DWARF) | 
 |     endif # PERF_HAVE_DWARF_REGS | 
 |   endif # NO_DWARF | 
 |  | 
 |   ifndef NO_LIBBPF | 
 |     ifeq ($(feature-bpf), 1) | 
 |       # detecting libbpf without LIBBPF_DYNAMIC, so make VF=1 shows libbpf detection status | 
 |       $(call feature_check,libbpf) | 
 |  | 
 |       ifdef LIBBPF_DYNAMIC | 
 |         ifeq ($(feature-libbpf), 1) | 
 |           EXTLIBS += -lbpf | 
 |           CFLAGS += -DHAVE_LIBBPF_SUPPORT | 
 |           $(call detected,CONFIG_LIBBPF) | 
 |           $(call detected,CONFIG_LIBBPF_DYNAMIC) | 
 |         else | 
 |           $(error Error: No libbpf devel library found or older than v1.0, please install/update libbpf-devel) | 
 |         endif | 
 |       else | 
 |         ifeq ($(NO_ZLIB), 1) | 
 |           $(warning Warning: Statically building libbpf not possible as zlib is missing) | 
 |           NO_LIBBPF := 1 | 
 |         else | 
 |           # Libbpf will be built as a static library from tools/lib/bpf. | 
 |           LIBBPF_STATIC := 1 | 
 |           $(call detected,CONFIG_LIBBPF) | 
 |           CFLAGS += -DHAVE_LIBBPF_SUPPORT | 
 |         endif | 
 |       endif | 
 |     endif | 
 |   endif # NO_LIBBPF | 
 | endif # NO_LIBELF | 
 |  | 
 | ifndef NO_SDT | 
 |   ifneq ($(feature-sdt), 1) | 
 |     $(warning No sys/sdt.h found, no SDT events are defined, please install systemtap-sdt-devel or systemtap-sdt-dev) | 
 |     NO_SDT := 1; | 
 |   else | 
 |     CFLAGS += -DHAVE_SDT_EVENT | 
 |     $(call detected,CONFIG_SDT_EVENT) | 
 |   endif | 
 | endif | 
 |  | 
 | ifdef PERF_HAVE_JITDUMP | 
 |   ifndef NO_LIBELF | 
 |     $(call detected,CONFIG_JITDUMP) | 
 |     CFLAGS += -DHAVE_JITDUMP | 
 |   endif | 
 | endif | 
 |  | 
 | ifeq ($(SRCARCH),powerpc) | 
 |   ifndef NO_DWARF | 
 |     CFLAGS += -DHAVE_SKIP_CALLCHAIN_IDX | 
 |   endif | 
 | endif | 
 |  | 
 | ifndef NO_LIBUNWIND | 
 |   have_libunwind := | 
 |  | 
 |   $(call feature_check,libunwind-x86) | 
 |   ifeq ($(feature-libunwind-x86), 1) | 
 |     $(call detected,CONFIG_LIBUNWIND_X86) | 
 |     CFLAGS += -DHAVE_LIBUNWIND_X86_SUPPORT | 
 |     LDFLAGS += -lunwind-x86 | 
 |     EXTLIBS_LIBUNWIND += -lunwind-x86 | 
 |     have_libunwind = 1 | 
 |   endif | 
 |  | 
 |   $(call feature_check,libunwind-aarch64) | 
 |   ifeq ($(feature-libunwind-aarch64), 1) | 
 |     $(call detected,CONFIG_LIBUNWIND_AARCH64) | 
 |     CFLAGS += -DHAVE_LIBUNWIND_AARCH64_SUPPORT | 
 |     LDFLAGS += -lunwind-aarch64 | 
 |     EXTLIBS_LIBUNWIND += -lunwind-aarch64 | 
 |     have_libunwind = 1 | 
 |     $(call feature_check,libunwind-debug-frame-aarch64) | 
 |     ifneq ($(feature-libunwind-debug-frame-aarch64), 1) | 
 |       $(warning No debug_frame support found in libunwind-aarch64) | 
 |       CFLAGS += -DNO_LIBUNWIND_DEBUG_FRAME_AARCH64 | 
 |     endif | 
 |   endif | 
 |  | 
 |   ifneq ($(feature-libunwind), 1) | 
 |     $(warning No libunwind found. Please install libunwind-dev[el] >= 1.1 and/or set LIBUNWIND_DIR) | 
 |     NO_LOCAL_LIBUNWIND := 1 | 
 |   else | 
 |     have_libunwind := 1 | 
 |     $(call detected,CONFIG_LOCAL_LIBUNWIND) | 
 |   endif | 
 |  | 
 |   ifneq ($(have_libunwind), 1) | 
 |     NO_LIBUNWIND := 1 | 
 |   endif | 
 | else | 
 |   NO_LOCAL_LIBUNWIND := 1 | 
 | endif | 
 |  | 
 | ifndef NO_LIBBPF | 
 |   ifneq ($(feature-bpf), 1) | 
 |     $(warning BPF API too old. Please install recent kernel headers. BPF support in 'perf record' is disabled.) | 
 |     NO_LIBBPF := 1 | 
 |   endif | 
 | endif | 
 |  | 
 | ifndef BUILD_BPF_SKEL | 
 |   # BPF skeletons control a large number of perf features, by default | 
 |   # they are enabled. | 
 |   BUILD_BPF_SKEL := 1 | 
 | endif | 
 |  | 
 | ifeq ($(BUILD_BPF_SKEL),1) | 
 |   ifeq ($(filter -DHAVE_LIBELF_SUPPORT, $(CFLAGS)),) | 
 |     $(warning Warning: Disabled BPF skeletons as libelf is required by bpftool) | 
 |     BUILD_BPF_SKEL := 0 | 
 |   else ifeq ($(filter -DHAVE_ZLIB_SUPPORT, $(CFLAGS)),) | 
 |     $(warning Warning: Disabled BPF skeletons as zlib is required by bpftool) | 
 |     BUILD_BPF_SKEL := 0 | 
 |   else ifeq ($(filter -DHAVE_LIBBPF_SUPPORT, $(CFLAGS)),) | 
 |     $(warning Warning: Disabled BPF skeletons as libbpf is required) | 
 |     BUILD_BPF_SKEL := 0 | 
 |   else ifeq ($(call get-executable,$(CLANG)),) | 
 |     $(warning Warning: Disabled BPF skeletons as clang ($(CLANG)) is missing) | 
 |     BUILD_BPF_SKEL := 0 | 
 |   else | 
 |     CLANG_VERSION := $(shell $(CLANG) --version | head -1 | sed 's/.*clang version \([[:digit:]]\+.[[:digit:]]\+.[[:digit:]]\+\).*/\1/g') | 
 |     ifeq ($(call version-lt3,$(CLANG_VERSION),12.0.1),1) | 
 |       $(warning Warning: Disabled BPF skeletons as reliable BTF generation needs at least $(CLANG) version 12.0.1) | 
 |       BUILD_BPF_SKEL := 0 | 
 |     endif | 
 |   endif | 
 |   ifeq ($(BUILD_BPF_SKEL),1) | 
 |     $(call feature_check,clang-bpf-co-re) | 
 |     ifeq ($(feature-clang-bpf-co-re), 0) | 
 |       $(warning Warning: Disabled BPF skeletons as clang is too old) | 
 |       BUILD_BPF_SKEL := 0 | 
 |     endif | 
 |   endif | 
 |   ifeq ($(BUILD_BPF_SKEL),1) | 
 |     $(call detected,CONFIG_PERF_BPF_SKEL) | 
 |     CFLAGS += -DHAVE_BPF_SKEL | 
 |   endif | 
 | endif | 
 |  | 
 | ifndef GEN_VMLINUX_H | 
 |   VMLINUX_H=$(src-perf)/util/bpf_skel/vmlinux/vmlinux.h | 
 | endif | 
 |  | 
 | dwarf-post-unwind := 1 | 
 | dwarf-post-unwind-text := BUG | 
 |  | 
 | # setup DWARF post unwinder | 
 | ifdef NO_LIBUNWIND | 
 |   ifdef NO_LIBDW_DWARF_UNWIND | 
 |     $(warning Disabling post unwind, no support found.) | 
 |     dwarf-post-unwind := 0 | 
 |   else | 
 |     dwarf-post-unwind-text := libdw | 
 |     $(call detected,CONFIG_LIBDW_DWARF_UNWIND) | 
 |   endif | 
 | else | 
 |   dwarf-post-unwind-text := libunwind | 
 |   $(call detected,CONFIG_LIBUNWIND) | 
 |   # Enable libunwind support by default. | 
 |   ifndef NO_LIBDW_DWARF_UNWIND | 
 |     NO_LIBDW_DWARF_UNWIND := 1 | 
 |   endif | 
 | endif | 
 |  | 
 | ifeq ($(dwarf-post-unwind),1) | 
 |   CFLAGS += -DHAVE_DWARF_UNWIND_SUPPORT | 
 |   $(call detected,CONFIG_DWARF_UNWIND) | 
 | else | 
 |   NO_DWARF_UNWIND := 1 | 
 | endif | 
 |  | 
 | ifndef NO_LOCAL_LIBUNWIND | 
 |   ifeq ($(SRCARCH),$(filter $(SRCARCH),arm arm64)) | 
 |     $(call feature_check,libunwind-debug-frame) | 
 |     ifneq ($(feature-libunwind-debug-frame), 1) | 
 |       $(warning No debug_frame support found in libunwind) | 
 |       CFLAGS += -DNO_LIBUNWIND_DEBUG_FRAME | 
 |     endif | 
 |   else | 
 |     # non-ARM has no dwarf_find_debug_frame() function: | 
 |     CFLAGS += -DNO_LIBUNWIND_DEBUG_FRAME | 
 |   endif | 
 |   EXTLIBS += $(LIBUNWIND_LIBS) | 
 |   LDFLAGS += $(LIBUNWIND_LIBS) | 
 | endif | 
 | ifeq ($(findstring -static,${LDFLAGS}),-static) | 
 |   # gcc -static links libgcc_eh which contans piece of libunwind | 
 |   LIBUNWIND_LDFLAGS += -Wl,--allow-multiple-definition | 
 | endif | 
 |  | 
 | ifndef NO_LIBUNWIND | 
 |   CFLAGS  += -DHAVE_LIBUNWIND_SUPPORT | 
 |   CFLAGS  += $(LIBUNWIND_CFLAGS) | 
 |   LDFLAGS += $(LIBUNWIND_LDFLAGS) | 
 |   EXTLIBS += $(EXTLIBS_LIBUNWIND) | 
 | endif | 
 |  | 
 | ifneq ($(NO_LIBTRACEEVENT),1) | 
 |   ifeq ($(NO_SYSCALL_TABLE),0) | 
 |     $(call detected,CONFIG_TRACE) | 
 |   else | 
 |     ifndef NO_LIBAUDIT | 
 |       $(call feature_check,libaudit) | 
 |       ifneq ($(feature-libaudit), 1) | 
 |         $(warning No libaudit.h found, disables 'trace' tool, please install audit-libs-devel or libaudit-dev) | 
 |         NO_LIBAUDIT := 1 | 
 |       else | 
 |         CFLAGS += -DHAVE_LIBAUDIT_SUPPORT | 
 |         EXTLIBS += -laudit | 
 |         $(call detected,CONFIG_TRACE) | 
 |       endif | 
 |     endif | 
 |   endif | 
 | endif | 
 |  | 
 | ifndef NO_LIBCRYPTO | 
 |   ifneq ($(feature-libcrypto), 1) | 
 |     $(warning No libcrypto.h found, disables jitted code injection, please install openssl-devel or libssl-dev) | 
 |     NO_LIBCRYPTO := 1 | 
 |   else | 
 |     CFLAGS += -DHAVE_LIBCRYPTO_SUPPORT | 
 |     EXTLIBS += -lcrypto | 
 |     $(call detected,CONFIG_CRYPTO) | 
 |   endif | 
 | endif | 
 |  | 
 | ifndef NO_SLANG | 
 |   ifneq ($(feature-libslang), 1) | 
 |     ifneq ($(feature-libslang-include-subdir), 1) | 
 |       $(warning slang not found, disables TUI support. Please install slang-devel, libslang-dev or libslang2-dev) | 
 |       NO_SLANG := 1 | 
 |     else | 
 |       CFLAGS += -DHAVE_SLANG_INCLUDE_SUBDIR | 
 |     endif | 
 |   endif | 
 |   ifndef NO_SLANG | 
 |     # Fedora has /usr/include/slang/slang.h, but ubuntu /usr/include/slang.h | 
 |     CFLAGS += -DHAVE_SLANG_SUPPORT | 
 |     EXTLIBS += -lslang | 
 |     $(call detected,CONFIG_SLANG) | 
 |   endif | 
 | endif | 
 |  | 
 | ifdef GTK2 | 
 |   FLAGS_GTK2=$(CFLAGS) $(LDFLAGS) $(EXTLIBS) $(shell $(PKG_CONFIG) --libs --cflags gtk+-2.0 2>/dev/null) | 
 |   $(call feature_check,gtk2) | 
 |   ifneq ($(feature-gtk2), 1) | 
 |     $(warning GTK2 not found, disables GTK2 support. Please install gtk2-devel or libgtk2.0-dev) | 
 |     NO_GTK2 := 1 | 
 |   else | 
 |     $(call feature_check,gtk2-infobar) | 
 |     ifeq ($(feature-gtk2-infobar), 1) | 
 |       GTK_CFLAGS := -DHAVE_GTK_INFO_BAR_SUPPORT | 
 |     endif | 
 |     CFLAGS += -DHAVE_GTK2_SUPPORT | 
 |     GTK_CFLAGS += $(shell $(PKG_CONFIG) --cflags gtk+-2.0 2>/dev/null) | 
 |     GTK_LIBS := $(shell $(PKG_CONFIG) --libs gtk+-2.0 2>/dev/null) | 
 |     EXTLIBS += -ldl | 
 |   endif | 
 | endif | 
 |  | 
 | ifdef NO_LIBPERL | 
 |   CFLAGS += -DNO_LIBPERL | 
 | else | 
 |   PERL_EMBED_LDOPTS = $(shell perl -MExtUtils::Embed -e ldopts 2>/dev/null) | 
 |   PERL_EMBED_LDFLAGS = $(call strip-libs,$(PERL_EMBED_LDOPTS)) | 
 |   PERL_EMBED_LIBADD = $(call grep-libs,$(PERL_EMBED_LDOPTS)) | 
 |   PERL_EMBED_CCOPTS = $(shell perl -MExtUtils::Embed -e ccopts 2>/dev/null) | 
 |   PERL_EMBED_CCOPTS := $(filter-out -specs=%,$(PERL_EMBED_CCOPTS)) | 
 |   PERL_EMBED_CCOPTS := $(filter-out -flto=auto -ffat-lto-objects, $(PERL_EMBED_CCOPTS)) | 
 |   PERL_EMBED_LDOPTS := $(filter-out -specs=%,$(PERL_EMBED_LDOPTS)) | 
 |   FLAGS_PERL_EMBED=$(PERL_EMBED_CCOPTS) $(PERL_EMBED_LDOPTS) | 
 |  | 
 |   ifneq ($(feature-libperl), 1) | 
 |     CFLAGS += -DNO_LIBPERL | 
 |     NO_LIBPERL := 1 | 
 |     $(warning Missing perl devel files. Disabling perl scripting support, please install perl-ExtUtils-Embed/libperl-dev) | 
 |   else | 
 |     LDFLAGS += $(PERL_EMBED_LDFLAGS) | 
 |     EXTLIBS += $(PERL_EMBED_LIBADD) | 
 |     CFLAGS += -DHAVE_LIBPERL_SUPPORT | 
 |     ifeq ($(CC_NO_CLANG), 0) | 
 |       CFLAGS += -Wno-compound-token-split-by-macro | 
 |     endif | 
 |     $(call detected,CONFIG_LIBPERL) | 
 |   endif | 
 | endif | 
 |  | 
 | ifeq ($(feature-timerfd), 1) | 
 |   CFLAGS += -DHAVE_TIMERFD_SUPPORT | 
 | else | 
 |   $(warning No timerfd support. Disables 'perf kvm stat live') | 
 | endif | 
 |  | 
 | disable-python = $(eval $(disable-python_code)) | 
 | define disable-python_code | 
 |   CFLAGS += -DNO_LIBPYTHON | 
 |   $(warning $1) | 
 |   NO_LIBPYTHON := 1 | 
 | endef | 
 |  | 
 | PYTHON_EXTENSION_SUFFIX := '.so' | 
 | ifdef NO_LIBPYTHON | 
 |   $(call disable-python,Python support disabled by user) | 
 | else | 
 |  | 
 |   ifndef PYTHON | 
 |     $(call disable-python,No python interpreter was found: disables Python support - please install python-devel/python-dev) | 
 |   else | 
 |     PYTHON_WORD := $(call shell-wordify,$(PYTHON)) | 
 |  | 
 |     ifndef PYTHON_CONFIG | 
 |       $(call disable-python,No 'python-config' tool was found: disables Python support - please install python-devel/python-dev) | 
 |     else | 
 |  | 
 |       ifneq ($(feature-libpython), 1) | 
 |         $(call disable-python,No 'Python.h' was found: disables Python support - please install python-devel/python-dev) | 
 |       else | 
 |          LDFLAGS += $(PYTHON_EMBED_LDFLAGS) | 
 |          EXTLIBS += $(PYTHON_EMBED_LIBADD) | 
 |          PYTHON_SETUPTOOLS_INSTALLED := $(shell $(PYTHON) -c 'import setuptools;' 2> /dev/null && echo "yes" || echo "no") | 
 |          ifeq ($(PYTHON_SETUPTOOLS_INSTALLED), yes) | 
 |            PYTHON_EXTENSION_SUFFIX := $(shell $(PYTHON) -c 'from importlib import machinery; print(machinery.EXTENSION_SUFFIXES[0])') | 
 |            ifdef CROSS_COMPILE | 
 |              PYTHON_EXTENSION_SUFFIX := $(subst $(PYTHON_NATIVE),$(shell $(CC) -dumpmachine),$(PYTHON_EXTENSION_SUFFIX)) | 
 |            endif | 
 |            LANG_BINDINGS += $(obj-perf)python/perf$(PYTHON_EXTENSION_SUFFIX) | 
 | 	 else | 
 |            $(warning Missing python setuptools, the python binding won't be built, please install python3-setuptools or equivalent) | 
 |          endif | 
 |          CFLAGS += -DHAVE_LIBPYTHON_SUPPORT | 
 |          $(call detected,CONFIG_LIBPYTHON) | 
 |          ifeq ($(filter -fPIC,$(CFLAGS)),) | 
 |            # Building a shared library requires position independent code. | 
 |            CFLAGS += -fPIC | 
 |            CXXFLAGS += -fPIC | 
 |          endif | 
 |       endif | 
 |     endif | 
 |   endif | 
 | endif | 
 |  | 
 | ifneq ($(NO_JEVENTS),1) | 
 |   ifeq ($(wildcard pmu-events/arch/$(SRCARCH)/mapfile.csv),) | 
 |     NO_JEVENTS := 1 | 
 |   endif | 
 | endif | 
 | ifneq ($(NO_JEVENTS),1) | 
 |   NO_JEVENTS := 0 | 
 |   ifndef PYTHON | 
 |     $(error ERROR: No python interpreter needed for jevents generation. Install python or build with NO_JEVENTS=1.) | 
 |   else | 
 |     # jevents.py uses f-strings present in Python 3.6 released in Dec. 2016. | 
 |     JEVENTS_PYTHON_GOOD := $(shell $(PYTHON) -c 'import sys;print("1" if(sys.version_info.major >= 3 and sys.version_info.minor >= 6) else "0")' 2> /dev/null) | 
 |     ifneq ($(JEVENTS_PYTHON_GOOD), 1) | 
 |       $(error ERROR: Python interpreter needed for jevents generation too old (older than 3.6). Install a newer python or build with NO_JEVENTS=1.) | 
 |     endif | 
 |   endif | 
 | endif | 
 |  | 
 | ifdef BUILD_NONDISTRO | 
 |   ifeq ($(feature-libbfd), 1) | 
 |     EXTLIBS += -lbfd -lopcodes | 
 |   else | 
 |     # we are on a system that requires -liberty and (maybe) -lz | 
 |     # to link against -lbfd; test each case individually here | 
 |  | 
 |     # call all detections now so we get correct | 
 |     # status in VF output | 
 |     $(call feature_check,libbfd-liberty) | 
 |     $(call feature_check,libbfd-liberty-z) | 
 |  | 
 |     ifeq ($(feature-libbfd-liberty), 1) | 
 |       EXTLIBS += -lbfd -lopcodes -liberty | 
 |       FEATURE_CHECK_LDFLAGS-disassembler-four-args += -liberty -ldl | 
 |       FEATURE_CHECK_LDFLAGS-disassembler-init-styled += -liberty -ldl | 
 |     else | 
 |       ifeq ($(feature-libbfd-liberty-z), 1) | 
 |         EXTLIBS += -lbfd -lopcodes -liberty -lz | 
 |         FEATURE_CHECK_LDFLAGS-disassembler-four-args += -liberty -lz -ldl | 
 |         FEATURE_CHECK_LDFLAGS-disassembler-init-styled += -liberty -lz -ldl | 
 |       endif | 
 |     endif | 
 |     $(call feature_check,disassembler-four-args) | 
 |     $(call feature_check,disassembler-init-styled) | 
 |   endif | 
 |  | 
 |   CFLAGS += -DHAVE_LIBBFD_SUPPORT | 
 |   CXXFLAGS += -DHAVE_LIBBFD_SUPPORT | 
 |   ifeq ($(feature-libbfd-buildid), 1) | 
 |     CFLAGS += -DHAVE_LIBBFD_BUILDID_SUPPORT | 
 |   else | 
 |     $(warning Old version of libbfd/binutils things like PE executable profiling will not be available) | 
 |   endif | 
 | endif | 
 |  | 
 | ifndef NO_DEMANGLE | 
 |   $(call feature_check,cxa-demangle) | 
 |   ifeq ($(feature-cxa-demangle), 1) | 
 |     EXTLIBS += -lstdc++ | 
 |     CFLAGS += -DHAVE_CXA_DEMANGLE_SUPPORT | 
 |     CXXFLAGS += -DHAVE_CXA_DEMANGLE_SUPPORT | 
 |     $(call detected,CONFIG_CXX_DEMANGLE) | 
 |   endif | 
 |   ifdef BUILD_NONDISTRO | 
 |     ifeq ($(filter -liberty,$(EXTLIBS)),) | 
 |       $(call feature_check,cplus-demangle) | 
 |       ifeq ($(feature-cplus-demangle), 1) | 
 |         EXTLIBS += -liberty | 
 |       endif | 
 |     endif | 
 |     ifneq ($(filter -liberty,$(EXTLIBS)),) | 
 |       CFLAGS += -DHAVE_CPLUS_DEMANGLE_SUPPORT | 
 |       CXXFLAGS += -DHAVE_CPLUS_DEMANGLE_SUPPORT | 
 |     endif | 
 |   endif | 
 | endif | 
 |  | 
 | ifndef NO_LZMA | 
 |   ifeq ($(feature-lzma), 1) | 
 |     CFLAGS += -DHAVE_LZMA_SUPPORT | 
 |     EXTLIBS += -llzma | 
 |     $(call detected,CONFIG_LZMA) | 
 |   else | 
 |     $(warning No liblzma found, disables xz kernel module decompression, please install xz-devel/liblzma-dev) | 
 |     NO_LZMA := 1 | 
 |   endif | 
 | endif | 
 |  | 
 | ifndef NO_LIBZSTD | 
 |   ifeq ($(feature-libzstd), 1) | 
 |     CFLAGS += -DHAVE_ZSTD_SUPPORT | 
 |     CFLAGS += $(LIBZSTD_CFLAGS) | 
 |     LDFLAGS += $(LIBZSTD_LDFLAGS) | 
 |     EXTLIBS += -lzstd | 
 |     $(call detected,CONFIG_ZSTD) | 
 |   else | 
 |     $(warning No libzstd found, disables trace compression, please install libzstd-dev[el] and/or set LIBZSTD_DIR) | 
 |     NO_LIBZSTD := 1 | 
 |   endif | 
 | endif | 
 |  | 
 | ifndef NO_LIBCAP | 
 |   ifeq ($(feature-libcap), 1) | 
 |     CFLAGS += -DHAVE_LIBCAP_SUPPORT | 
 |     EXTLIBS += -lcap | 
 |     $(call detected,CONFIG_LIBCAP) | 
 |   else | 
 |     $(warning No libcap found, disables capability support, please install libcap-devel/libcap-dev) | 
 |     NO_LIBCAP := 1 | 
 |   endif | 
 | endif | 
 |  | 
 | ifndef NO_BACKTRACE | 
 |   ifeq ($(feature-backtrace), 1) | 
 |     CFLAGS += -DHAVE_BACKTRACE_SUPPORT | 
 |   endif | 
 | endif | 
 |  | 
 | ifndef NO_LIBNUMA | 
 |   ifeq ($(feature-libnuma), 0) | 
 |     $(warning No numa.h found, disables 'perf bench numa mem' benchmark, please install numactl-devel/libnuma-devel/libnuma-dev) | 
 |     NO_LIBNUMA := 1 | 
 |   else | 
 |     ifeq ($(feature-numa_num_possible_cpus), 0) | 
 |       $(warning Old numa library found, disables 'perf bench numa mem' benchmark, please install numactl-devel/libnuma-devel/libnuma-dev >= 2.0.8) | 
 |       NO_LIBNUMA := 1 | 
 |     else | 
 |       CFLAGS += -DHAVE_LIBNUMA_SUPPORT | 
 |       EXTLIBS += -lnuma | 
 |       $(call detected,CONFIG_NUMA) | 
 |     endif | 
 |   endif | 
 | endif | 
 |  | 
 | ifdef HAVE_KVM_STAT_SUPPORT | 
 |     CFLAGS += -DHAVE_KVM_STAT_SUPPORT | 
 | endif | 
 |  | 
 | ifeq ($(feature-disassembler-four-args), 1) | 
 |     CFLAGS += -DDISASM_FOUR_ARGS_SIGNATURE | 
 | endif | 
 |  | 
 | ifeq ($(feature-disassembler-init-styled), 1) | 
 |     CFLAGS += -DDISASM_INIT_STYLED | 
 | endif | 
 |  | 
 | ifeq (${IS_64_BIT}, 1) | 
 |   ifndef NO_PERF_READ_VDSO32 | 
 |     $(call feature_check,compile-32) | 
 |     ifeq ($(feature-compile-32), 1) | 
 |       CFLAGS += -DHAVE_PERF_READ_VDSO32 | 
 |     else | 
 |       NO_PERF_READ_VDSO32 := 1 | 
 |     endif | 
 |   endif | 
 |   ifneq ($(SRCARCH), x86) | 
 |     NO_PERF_READ_VDSOX32 := 1 | 
 |   endif | 
 |   ifndef NO_PERF_READ_VDSOX32 | 
 |     $(call feature_check,compile-x32) | 
 |     ifeq ($(feature-compile-x32), 1) | 
 |       CFLAGS += -DHAVE_PERF_READ_VDSOX32 | 
 |     else | 
 |       NO_PERF_READ_VDSOX32 := 1 | 
 |     endif | 
 |   endif | 
 | else | 
 |   NO_PERF_READ_VDSO32 := 1 | 
 |   NO_PERF_READ_VDSOX32 := 1 | 
 | endif | 
 |  | 
 | ifndef NO_LIBBABELTRACE | 
 |   $(call feature_check,libbabeltrace) | 
 |   ifeq ($(feature-libbabeltrace), 1) | 
 |     CFLAGS += -DHAVE_LIBBABELTRACE_SUPPORT $(LIBBABELTRACE_CFLAGS) | 
 |     LDFLAGS += $(LIBBABELTRACE_LDFLAGS) | 
 |     EXTLIBS += -lbabeltrace-ctf | 
 |     $(call detected,CONFIG_LIBBABELTRACE) | 
 |   else | 
 |     $(warning No libbabeltrace found, disables 'perf data' CTF format support, please install libbabeltrace-dev[el]/libbabeltrace-ctf-dev) | 
 |   endif | 
 | endif | 
 |  | 
 | ifndef NO_CAPSTONE | 
 |   $(call feature_check,libcapstone) | 
 |   ifeq ($(feature-libcapstone), 1) | 
 |     CFLAGS += -DHAVE_LIBCAPSTONE_SUPPORT $(LIBCAPSTONE_CFLAGS) | 
 |     LDFLAGS += $(LICAPSTONE_LDFLAGS) | 
 |     EXTLIBS += -lcapstone | 
 |     $(call detected,CONFIG_LIBCAPSTONE) | 
 |   else | 
 |     msg := $(warning No libcapstone found, disables disasm engine support for 'perf script', please install libcapstone-dev/capstone-devel); | 
 |   endif | 
 | endif | 
 |  | 
 | ifndef NO_AUXTRACE | 
 |   ifeq ($(SRCARCH),x86) | 
 |     ifeq ($(feature-get_cpuid), 0) | 
 |       $(warning Your gcc lacks the __get_cpuid() builtin, disables support for auxtrace/Intel PT, please install a newer gcc) | 
 |       NO_AUXTRACE := 1 | 
 |     endif | 
 |   endif | 
 |   ifndef NO_AUXTRACE | 
 |     $(call detected,CONFIG_AUXTRACE) | 
 |     CFLAGS += -DHAVE_AUXTRACE_SUPPORT | 
 |     ifeq ($(feature-reallocarray), 0) | 
 |       CFLAGS += -DCOMPAT_NEED_REALLOCARRAY | 
 |     endif | 
 |   endif | 
 | endif | 
 |  | 
 | ifdef EXTRA_TESTS | 
 |     $(call detected,CONFIG_EXTRA_TESTS) | 
 |     CFLAGS += -DHAVE_EXTRA_TESTS | 
 | endif | 
 |  | 
 | ifndef NO_JVMTI | 
 |   ifneq (,$(wildcard /usr/sbin/update-java-alternatives)) | 
 |     JDIR=$(shell /usr/sbin/update-java-alternatives -l | head -1 | awk '{print $$3}') | 
 |   else | 
 |     ifneq (,$(wildcard /usr/sbin/alternatives)) | 
 |       JDIR=$(shell /usr/sbin/alternatives --display java | tail -1 | cut -d' ' -f 5 | sed -e 's%/jre/bin/java.%%g' -e 's%/bin/java.%%g') | 
 |     endif | 
 |   endif | 
 |   ifndef JDIR | 
 |     $(warning No alternatives command found, you need to set JDIR= to point to the root of your Java directory) | 
 |     NO_JVMTI := 1 | 
 |   endif | 
 | endif | 
 |  | 
 | ifndef NO_JVMTI | 
 |   FEATURE_CHECK_CFLAGS-jvmti := -I$(JDIR)/include -I$(JDIR)/include/linux | 
 |   $(call feature_check,jvmti) | 
 |   ifeq ($(feature-jvmti), 1) | 
 |     $(call detected_var,JDIR) | 
 |     ifndef NO_JVMTI_CMLR | 
 |       FEATURE_CHECK_CFLAGS-jvmti-cmlr := $(FEATURE_CHECK_CFLAGS-jvmti) | 
 |       $(call feature_check,jvmti-cmlr) | 
 |       ifeq ($(feature-jvmti-cmlr), 1) | 
 |         CFLAGS += -DHAVE_JVMTI_CMLR | 
 |       endif | 
 |     endif # NO_JVMTI_CMLR | 
 |   else | 
 |     $(warning No openjdk development package found, please install JDK package, e.g. openjdk-8-jdk, java-1.8.0-openjdk-devel) | 
 |     NO_JVMTI := 1 | 
 |   endif | 
 | endif | 
 |  | 
 | ifndef NO_LIBPFM4 | 
 |   $(call feature_check,libpfm4) | 
 |   ifeq ($(feature-libpfm4), 1) | 
 |     CFLAGS += -DHAVE_LIBPFM | 
 |     EXTLIBS += -lpfm | 
 |     ASCIIDOC_EXTRA = -aHAVE_LIBPFM=1 | 
 |     $(call detected,CONFIG_LIBPFM4) | 
 |   else | 
 |     $(warning libpfm4 not found, disables libpfm4 support. Please install libpfm4-dev) | 
 |   endif | 
 | endif | 
 |  | 
 | # libtraceevent is a recommended dependency picked up from the system. | 
 | ifneq ($(NO_LIBTRACEEVENT),1) | 
 |   $(call feature_check,libtraceevent) | 
 |   ifeq ($(feature-libtraceevent), 1) | 
 |     CFLAGS += -DHAVE_LIBTRACEEVENT $(shell $(PKG_CONFIG) --cflags libtraceevent) | 
 |     LDFLAGS += $(shell $(PKG_CONFIG) --libs-only-L libtraceevent) | 
 |     EXTLIBS += $(shell $(PKG_CONFIG) --libs-only-l libtraceevent) | 
 |     LIBTRACEEVENT_VERSION := $(shell $(PKG_CONFIG) --modversion libtraceevent).0.0 | 
 |     LIBTRACEEVENT_VERSION_1 := $(word 1, $(subst ., ,$(LIBTRACEEVENT_VERSION))) | 
 |     LIBTRACEEVENT_VERSION_2 := $(word 2, $(subst ., ,$(LIBTRACEEVENT_VERSION))) | 
 |     LIBTRACEEVENT_VERSION_3 := $(word 3, $(subst ., ,$(LIBTRACEEVENT_VERSION))) | 
 |     LIBTRACEEVENT_VERSION_CPP := $(shell expr $(LIBTRACEEVENT_VERSION_1) \* 255 \* 255 + $(LIBTRACEEVENT_VERSION_2) \* 255 + $(LIBTRACEEVENT_VERSION_3)) | 
 |     CFLAGS += -DLIBTRACEEVENT_VERSION=$(LIBTRACEEVENT_VERSION_CPP) | 
 |     $(call detected,CONFIG_LIBTRACEEVENT) | 
 |   else | 
 |     $(error ERROR: libtraceevent is missing. Please install libtraceevent-dev/libtraceevent-devel and/or set LIBTRACEEVENT_DIR or build with NO_LIBTRACEEVENT=1) | 
 |   endif | 
 |  | 
 |   $(call feature_check,libtracefs) | 
 |   ifeq ($(feature-libtracefs), 1) | 
 |     CFLAGS +=  $(shell $(PKG_CONFIG) --cflags libtracefs) | 
 |     LDFLAGS += $(shell $(PKG_CONFIG) --libs-only-L libtracefs) | 
 |     EXTLIBS += $(shell $(PKG_CONFIG) --libs-only-l libtracefs) | 
 |     LIBTRACEFS_VERSION := $(shell $(PKG_CONFIG) --modversion libtracefs).0.0 | 
 |     LIBTRACEFS_VERSION_1 := $(word 1, $(subst ., ,$(LIBTRACEFS_VERSION))) | 
 |     LIBTRACEFS_VERSION_2 := $(word 2, $(subst ., ,$(LIBTRACEFS_VERSION))) | 
 |     LIBTRACEFS_VERSION_3 := $(word 3, $(subst ., ,$(LIBTRACEFS_VERSION))) | 
 |     LIBTRACEFS_VERSION_CPP := $(shell expr $(LIBTRACEFS_VERSION_1) \* 255 \* 255 + $(LIBTRACEFS_VERSION_2) \* 255 + $(LIBTRACEFS_VERSION_3)) | 
 |     CFLAGS += -DLIBTRACEFS_VERSION=$(LIBTRACEFS_VERSION_CPP) | 
 |   else | 
 |     $(warning libtracefs is missing. Please install libtracefs-dev/libtracefs-devel) | 
 |   endif | 
 | endif | 
 |  | 
 | # Among the variables below, these: | 
 | #   perfexecdir | 
 | #   libbpf_include_dir | 
 | #   perf_examples_dir | 
 | #   template_dir | 
 | #   mandir | 
 | #   infodir | 
 | #   htmldir | 
 | #   ETC_PERFCONFIG (but not sysconfdir) | 
 | # can be specified as a relative path some/where/else; | 
 | # this is interpreted as relative to $(prefix) and "perf" at | 
 | # runtime figures out where they are based on the path to the executable. | 
 | # This can help installing the suite in a relocatable way. | 
 |  | 
 | # Make the path relative to DESTDIR, not to prefix | 
 | ifndef DESTDIR | 
 | prefix ?= $(HOME) | 
 | endif | 
 | bindir_relative = bin | 
 | bindir = $(abspath $(prefix)/$(bindir_relative)) | 
 | includedir_relative = include | 
 | includedir = $(abspath $(prefix)/$(includedir_relative)) | 
 | mandir = share/man | 
 | infodir = share/info | 
 | perfexecdir = libexec/perf-core | 
 | # FIXME: system's libbpf header directory, where we expect to find bpf/bpf_helpers.h, for instance | 
 | libbpf_include_dir = /usr/include | 
 | perf_examples_dir = lib/perf/examples | 
 | sharedir = $(prefix)/share | 
 | template_dir = share/perf-core/templates | 
 | STRACE_GROUPS_DIR = share/perf-core/strace/groups | 
 | htmldir = share/doc/perf-doc | 
 | tipdir = share/doc/perf-tip | 
 | srcdir = $(srctree)/tools/perf | 
 | ifeq ($(prefix),/usr) | 
 | sysconfdir = /etc | 
 | ETC_PERFCONFIG = $(sysconfdir)/perfconfig | 
 | else | 
 | sysconfdir = $(prefix)/etc | 
 | ETC_PERFCONFIG = etc/perfconfig | 
 | endif | 
 | ifndef lib | 
 | ifeq ($(SRCARCH)$(IS_64_BIT), x861) | 
 | lib = lib64 | 
 | else | 
 | lib = lib | 
 | endif | 
 | endif # lib | 
 | libdir = $(prefix)/$(lib) | 
 |  | 
 | # Shell quote (do not use $(call) to accommodate ancient setups); | 
 | ETC_PERFCONFIG_SQ = $(subst ','\'',$(ETC_PERFCONFIG)) | 
 | STRACE_GROUPS_DIR_SQ = $(subst ','\'',$(STRACE_GROUPS_DIR)) | 
 | DESTDIR_SQ = $(subst ','\'',$(DESTDIR)) | 
 | bindir_SQ = $(subst ','\'',$(bindir)) | 
 | includedir_SQ = $(subst ','\'',$(includedir)) | 
 | mandir_SQ = $(subst ','\'',$(mandir)) | 
 | infodir_SQ = $(subst ','\'',$(infodir)) | 
 | perfexecdir_SQ = $(subst ','\'',$(perfexecdir)) | 
 | libbpf_include_dir_SQ = $(subst ','\'',$(libbpf_include_dir)) | 
 | perf_examples_dir_SQ = $(subst ','\'',$(perf_examples_dir)) | 
 | template_dir_SQ = $(subst ','\'',$(template_dir)) | 
 | htmldir_SQ = $(subst ','\'',$(htmldir)) | 
 | tipdir_SQ = $(subst ','\'',$(tipdir)) | 
 | prefix_SQ = $(subst ','\'',$(prefix)) | 
 | sysconfdir_SQ = $(subst ','\'',$(sysconfdir)) | 
 | libdir_SQ = $(subst ','\'',$(libdir)) | 
 | srcdir_SQ = $(subst ','\'',$(srcdir)) | 
 |  | 
 | ifneq ($(filter /%,$(firstword $(perfexecdir))),) | 
 | perfexec_instdir = $(perfexecdir) | 
 | perf_include_instdir = $(libbpf_include_dir) | 
 | perf_examples_instdir = $(perf_examples_dir) | 
 | STRACE_GROUPS_INSTDIR = $(STRACE_GROUPS_DIR) | 
 | tip_instdir = $(tipdir) | 
 | else | 
 | perfexec_instdir = $(prefix)/$(perfexecdir) | 
 | perf_include_instdir = $(prefix)/$(libbpf_include_dir) | 
 | perf_examples_instdir = $(prefix)/$(perf_examples_dir) | 
 | STRACE_GROUPS_INSTDIR = $(prefix)/$(STRACE_GROUPS_DIR) | 
 | tip_instdir = $(prefix)/$(tipdir) | 
 | endif | 
 | perfexec_instdir_SQ = $(subst ','\'',$(perfexec_instdir)) | 
 | perf_include_instdir_SQ = $(subst ','\'',$(perf_include_instdir)) | 
 | perf_examples_instdir_SQ = $(subst ','\'',$(perf_examples_instdir)) | 
 | STRACE_GROUPS_INSTDIR_SQ = $(subst ','\'',$(STRACE_GROUPS_INSTDIR)) | 
 | tip_instdir_SQ = $(subst ','\'',$(tip_instdir)) | 
 |  | 
 | export perfexec_instdir_SQ | 
 |  | 
 | print_var = $(eval $(print_var_code)) $(info $(MSG)) | 
 | define print_var_code | 
 |     MSG = $(shell printf '...%40s: %s' $(1) $($(1))) | 
 | endef | 
 |  | 
 | ifeq ($(feature_display),1) | 
 |   $(call feature_display_entries) | 
 | endif | 
 |  | 
 | ifeq ($(VF),1) | 
 |   # Display EXTRA features which are detected manualy | 
 |   # from here with feature_check call and thus cannot | 
 |   # be partof global state output. | 
 |   $(foreach feat,$(FEATURE_TESTS_EXTRA),$(call feature_print_status,$(feat),) $(info $(MSG))) | 
 |   $(call print_var,prefix) | 
 |   $(call print_var,bindir) | 
 |   $(call print_var,libdir) | 
 |   $(call print_var,sysconfdir) | 
 |   $(call print_var,LIBUNWIND_DIR) | 
 |   $(call print_var,LIBDW_DIR) | 
 |   $(call print_var,JDIR) | 
 |  | 
 |   ifeq ($(dwarf-post-unwind),1) | 
 |     $(call feature_print_text,"DWARF post unwind library", $(dwarf-post-unwind-text)) $(info $(MSG)) | 
 |   endif | 
 | endif | 
 |  | 
 | $(info ) | 
 |  | 
 | $(call detected_var,bindir_SQ) | 
 | $(call detected_var,PYTHON_WORD) | 
 | ifneq ($(OUTPUT),) | 
 | $(call detected_var,OUTPUT) | 
 | endif | 
 | $(call detected_var,htmldir_SQ) | 
 | $(call detected_var,infodir_SQ) | 
 | $(call detected_var,mandir_SQ) | 
 | $(call detected_var,ETC_PERFCONFIG_SQ) | 
 | $(call detected_var,STRACE_GROUPS_DIR_SQ) | 
 | $(call detected_var,prefix_SQ) | 
 | $(call detected_var,perfexecdir_SQ) | 
 | $(call detected_var,libbpf_include_dir_SQ) | 
 | $(call detected_var,perf_examples_dir_SQ) | 
 | $(call detected_var,tipdir_SQ) | 
 | $(call detected_var,srcdir_SQ) | 
 | $(call detected_var,LIBDIR) | 
 | $(call detected_var,GTK_CFLAGS) | 
 | $(call detected_var,PERL_EMBED_CCOPTS) | 
 | $(call detected_var,PYTHON_EMBED_CCOPTS) | 
 | ifneq ($(BISON_FILE_PREFIX_MAP),) | 
 | $(call detected_var,BISON_FILE_PREFIX_MAP) | 
 | endif | 
 |  | 
 | # re-generate FEATURE-DUMP as we may have called feature_check, found out | 
 | # extra libraries to add to LDFLAGS of some other test and then redo those | 
 | # tests, see the block about libbfd, disassembler-four-args, for instance. | 
 | $(shell rm -f $(FEATURE_DUMP_FILENAME)) | 
 | $(foreach feat,$(FEATURE_TESTS),$(shell echo "$(call feature_assign,$(feat))" >> $(FEATURE_DUMP_FILENAME))) |