| // SPDX-License-Identifier: MIT | |
| /* | |
| * Copyright © 2023 Intel Corporation | |
| */ | |
| #include "xe_devcoredump.h" | |
| #include "xe_devcoredump_types.h" | |
| #include <linux/ascii85.h> | |
| #include <linux/devcoredump.h> | |
| #include <linux/utsname.h> | |
| #include <drm/drm_managed.h> | |
| #include "xe_device.h" | |
| #include "xe_exec_queue.h" | |
| #include "xe_force_wake.h" | |
| #include "xe_gt_printk.h" | |
| #include "xe_gt_types.h" | |
| #include "xe_guc_capture.h" | |
| #include "xe_guc_ct.h" | |
| #include "xe_guc_log.h" | |
| #include "xe_guc_submit.h" | |
| #include "xe_hw_engine.h" | |
| #include "xe_pm.h" | |
| #include "xe_sched_job.h" | |
| #include "xe_vm.h" | |
| /** | |
| * DOC: Xe device coredump | |
| * | |
| * Xe uses dev_coredump infrastructure for exposing the crash errors in a | |
| * standardized way. Once a crash occurs, devcoredump exposes a temporary | |
| * node under ``/sys/class/devcoredump/devcd<m>/``. The same node is also | |
| * accessible in ``/sys/class/drm/card<n>/device/devcoredump/``. The | |
| * ``failing_device`` symlink points to the device that crashed and created the | |
| * coredump. | |
| * | |
| * The following characteristics are observed by xe when creating a device | |
| * coredump: | |
| * | |
| * **Snapshot at hang**: | |
| * The 'data' file contains a snapshot of the HW and driver states at the time | |
| * the hang happened. Due to the driver recovering from resets/crashes, it may | |
| * not correspond to the state of the system when the file is read by | |
| * userspace. | |
| * | |
| * **Coredump release**: | |
| * After a coredump is generated, it stays in kernel memory until released by | |
| * userspace by writing anything to it, or after an internal timer expires. The | |
| * exact timeout may vary and should not be relied upon. Example to release | |
| * a coredump: | |
| * | |
| * .. code-block:: shell | |
| * | |
| * $ > /sys/class/drm/card0/device/devcoredump/data | |
| * | |
| * **First failure only**: | |
| * In general, the first hang is the most critical one since the following | |
| * hangs can be a consequence of the initial hang. For this reason a snapshot | |
| * is taken only for the first failure. Until the devcoredump is released by | |
| * userspace or kernel, all subsequent hangs do not override the snapshot nor | |
| * create new ones. Devcoredump has a delayed work queue that will eventually | |
| * delete the file node and free all the dump information. | |
| */ | |
| #ifdef CONFIG_DEV_COREDUMP | |
| /* 1 hour timeout */ | |
| #define XE_COREDUMP_TIMEOUT_JIFFIES (60 * 60 * HZ) | |
| static struct xe_device *coredump_to_xe(const struct xe_devcoredump *coredump) | |
| { | |
| return container_of(coredump, struct xe_device, devcoredump); | |
| } | |
| static struct xe_guc *exec_queue_to_guc(struct xe_exec_queue *q) | |
| { | |
| return &q->gt->uc.guc; | |
| } | |
| static ssize_t __xe_devcoredump_read(char *buffer, ssize_t count, | |
| ssize_t start, | |
| struct xe_devcoredump *coredump) | |
| { | |
| struct xe_device *xe; | |
| struct xe_devcoredump_snapshot *ss; | |
| struct drm_printer p; | |
| struct drm_print_iterator iter; | |
| struct timespec64 ts; | |
| int i; | |
| xe = coredump_to_xe(coredump); | |
| ss = &coredump->snapshot; | |
| iter.data = buffer; | |
| iter.start = start; | |
| iter.remain = count; | |
| p = drm_coredump_printer(&iter); | |
| drm_puts(&p, "**** Xe Device Coredump ****\n"); | |
| drm_printf(&p, "Reason: %s\n", ss->reason); | |
| drm_printf(&p, "kernel: %s\n", init_utsname()->release); | |
| drm_puts(&p, "module: " KBUILD_MODNAME "\n"); | |
| ts = ktime_to_timespec64(ss->snapshot_time); | |
| drm_printf(&p, "Snapshot time: %ptSp\n", &ts); | |
| ts = ktime_to_timespec64(ss->boot_time); | |
| drm_printf(&p, "Uptime: %ptSp\n", &ts); | |
| drm_printf(&p, "Process: %s [%d]\n", ss->process_name, ss->pid); | |
| xe_device_snapshot_print(xe, &p); | |
| drm_printf(&p, "\n**** GT #%d ****\n", ss->gt->info.id); | |
| drm_printf(&p, "\tTile: %d\n", ss->gt->tile->id); | |
| drm_puts(&p, "\n**** GuC Log ****\n"); | |
| xe_guc_log_snapshot_print(ss->guc.log, &p); | |
| drm_puts(&p, "\n**** GuC CT ****\n"); | |
| xe_guc_ct_snapshot_print(ss->guc.ct, &p); | |
| drm_puts(&p, "\n**** Contexts ****\n"); | |
| xe_guc_exec_queue_snapshot_print(ss->ge, &p); | |
| drm_puts(&p, "\n**** Job ****\n"); | |
| xe_sched_job_snapshot_print(ss->job, &p); | |
| drm_puts(&p, "\n**** HW Engines ****\n"); | |
| for (i = 0; i < XE_NUM_HW_ENGINES; i++) | |
| if (ss->hwe[i]) | |
| xe_engine_snapshot_print(ss->hwe[i], &p); | |
| drm_puts(&p, "\n**** VM state ****\n"); | |
| xe_vm_snapshot_print(ss->vm, &p); | |
| return count - iter.remain; | |
| } | |
| static void xe_devcoredump_snapshot_free(struct xe_devcoredump_snapshot *ss) | |
| { | |
| int i; | |
| kfree(ss->reason); | |
| ss->reason = NULL; | |
| xe_guc_log_snapshot_free(ss->guc.log); | |
| ss->guc.log = NULL; | |
| xe_guc_ct_snapshot_free(ss->guc.ct); | |
| ss->guc.ct = NULL; | |
| if (!IS_ERR_OR_NULL(ss->gt)) | |
| xe_guc_capture_put_matched_nodes(&ss->gt->uc.guc); | |
| ss->matched_node = NULL; | |
| xe_guc_exec_queue_snapshot_free(ss->ge); | |
| ss->ge = NULL; | |
| xe_sched_job_snapshot_free(ss->job); | |
| ss->job = NULL; | |
| for (i = 0; i < XE_NUM_HW_ENGINES; i++) | |
| if (ss->hwe[i]) { | |
| xe_hw_engine_snapshot_free(ss->hwe[i]); | |
| ss->hwe[i] = NULL; | |
| } | |
| xe_vm_snapshot_free(ss->vm); | |
| ss->vm = NULL; | |
| } | |
| #define XE_DEVCOREDUMP_CHUNK_MAX (SZ_512M + SZ_1G) | |
| /** | |
| * xe_devcoredump_read() - Read data from the Xe device coredump snapshot | |
| * @buffer: Destination buffer to copy the coredump data into | |
| * @offset: Offset in the coredump data to start reading from | |
| * @count: Number of bytes to read | |
| * @data: Pointer to the xe_devcoredump structure | |
| * @datalen: Length of the data (unused) | |
| * | |
| * Reads a chunk of the coredump snapshot data into the provided buffer. | |
| * If the devcoredump is smaller than 1.5 GB (XE_DEVCOREDUMP_CHUNK_MAX), | |
| * it is read directly from a pre-written buffer. For larger devcoredumps, | |
| * the pre-written buffer must be periodically repopulated from the snapshot | |
| * state due to kmalloc size limitations. | |
| * | |
| * Return: Number of bytes copied on success, or a negative error code on failure. | |
| */ | |
| static ssize_t xe_devcoredump_read(char *buffer, loff_t offset, | |
| size_t count, void *data, size_t datalen) | |
| { | |
| struct xe_devcoredump *coredump = data; | |
| struct xe_devcoredump_snapshot *ss; | |
| ssize_t byte_copied = 0; | |
| u32 chunk_offset; | |
| ssize_t new_chunk_position; | |
| bool pm_needed = false; | |
| int ret = 0; | |
| if (!coredump) | |
| return -ENODEV; | |
| ss = &coredump->snapshot; | |
| /* Ensure delayed work is captured before continuing */ | |
| flush_work(&ss->work); | |
| pm_needed = ss->read.size > XE_DEVCOREDUMP_CHUNK_MAX; | |
| if (pm_needed) | |
| xe_pm_runtime_get(gt_to_xe(ss->gt)); | |
| mutex_lock(&coredump->lock); | |
| if (!ss->read.buffer) { | |
| ret = -ENODEV; | |
| goto unlock; | |
| } | |
| if (offset >= ss->read.size) | |
| goto unlock; | |
| new_chunk_position = div_u64_rem(offset, | |
| XE_DEVCOREDUMP_CHUNK_MAX, | |
| &chunk_offset); | |
| if (offset >= ss->read.chunk_position + XE_DEVCOREDUMP_CHUNK_MAX || | |
| offset < ss->read.chunk_position) { | |
| ss->read.chunk_position = new_chunk_position * | |
| XE_DEVCOREDUMP_CHUNK_MAX; | |
| __xe_devcoredump_read(ss->read.buffer, | |
| XE_DEVCOREDUMP_CHUNK_MAX, | |
| ss->read.chunk_position, coredump); | |
| } | |
| byte_copied = count < ss->read.size - offset ? count : | |
| ss->read.size - offset; | |
| memcpy(buffer, ss->read.buffer + chunk_offset, byte_copied); | |
| unlock: | |
| mutex_unlock(&coredump->lock); | |
| if (pm_needed) | |
| xe_pm_runtime_put(gt_to_xe(ss->gt)); | |
| return byte_copied ? byte_copied : ret; | |
| } | |
| static void xe_devcoredump_free(void *data) | |
| { | |
| struct xe_devcoredump *coredump = data; | |
| /* Our device is gone. Nothing to do... */ | |
| if (!data || !coredump_to_xe(coredump)) | |
| return; | |
| if (coredump->captured) | |
| cancel_work_sync(&coredump->snapshot.work); | |
| mutex_lock(&coredump->lock); | |
| xe_devcoredump_snapshot_free(&coredump->snapshot); | |
| kvfree(coredump->snapshot.read.buffer); | |
| /* To prevent stale data on next snapshot, clear everything */ | |
| memset(&coredump->snapshot, 0, sizeof(coredump->snapshot)); | |
| coredump->captured = false; | |
| drm_info(&coredump_to_xe(coredump)->drm, | |
| "Xe device coredump has been deleted.\n"); | |
| mutex_unlock(&coredump->lock); | |
| } | |
| static void xe_devcoredump_deferred_snap_work(struct work_struct *work) | |
| { | |
| struct xe_devcoredump_snapshot *ss = container_of(work, typeof(*ss), work); | |
| struct xe_devcoredump *coredump = container_of(ss, typeof(*coredump), snapshot); | |
| struct xe_device *xe = coredump_to_xe(coredump); | |
| /* | |
| * NB: Despite passing a GFP_ flags parameter here, more allocations are done | |
| * internally using GFP_KERNEL explicitly. Hence this call must be in the worker | |
| * thread and not in the initial capture call. | |
| */ | |
| dev_coredumpm_timeout(gt_to_xe(ss->gt)->drm.dev, THIS_MODULE, coredump, 0, GFP_KERNEL, | |
| xe_devcoredump_read, xe_devcoredump_free, | |
| XE_COREDUMP_TIMEOUT_JIFFIES); | |
| guard(xe_pm_runtime)(xe); | |
| /* keep going if fw fails as we still want to save the memory and SW data */ | |
| xe_with_force_wake(fw_ref, gt_to_fw(ss->gt), XE_FORCEWAKE_ALL) { | |
| if (!xe_force_wake_ref_has_domain(fw_ref.domains, XE_FORCEWAKE_ALL)) | |
| xe_gt_info(ss->gt, "failed to get forcewake for coredump capture\n"); | |
| xe_vm_snapshot_capture_delayed(ss->vm); | |
| xe_guc_exec_queue_snapshot_capture_delayed(ss->ge); | |
| } | |
| ss->read.chunk_position = 0; | |
| /* Calculate devcoredump size */ | |
| ss->read.size = __xe_devcoredump_read(NULL, LONG_MAX, 0, coredump); | |
| if (ss->read.size > XE_DEVCOREDUMP_CHUNK_MAX) { | |
| ss->read.buffer = kvmalloc(XE_DEVCOREDUMP_CHUNK_MAX, | |
| GFP_USER); | |
| if (!ss->read.buffer) | |
| return; | |
| __xe_devcoredump_read(ss->read.buffer, | |
| XE_DEVCOREDUMP_CHUNK_MAX, | |
| 0, coredump); | |
| } else { | |
| ss->read.buffer = kvmalloc(ss->read.size, GFP_USER); | |
| if (!ss->read.buffer) | |
| return; | |
| __xe_devcoredump_read(ss->read.buffer, ss->read.size, 0, | |
| coredump); | |
| xe_devcoredump_snapshot_free(ss); | |
| } | |
| } | |
| static void devcoredump_snapshot(struct xe_devcoredump *coredump, | |
| struct xe_exec_queue *q, | |
| struct xe_sched_job *job) | |
| { | |
| struct xe_devcoredump_snapshot *ss = &coredump->snapshot; | |
| struct xe_guc *guc = exec_queue_to_guc(q); | |
| const char *process_name = "no process"; | |
| bool cookie; | |
| ss->snapshot_time = ktime_get_real(); | |
| ss->boot_time = ktime_get_boottime(); | |
| if (q->vm && q->vm->xef) { | |
| process_name = q->vm->xef->process_name; | |
| ss->pid = q->vm->xef->pid; | |
| } | |
| strscpy(ss->process_name, process_name); | |
| ss->gt = q->gt; | |
| INIT_WORK(&ss->work, xe_devcoredump_deferred_snap_work); | |
| /* keep going if fw fails as we still want to save the memory and SW data */ | |
| CLASS(xe_force_wake, fw_ref)(gt_to_fw(q->gt), XE_FORCEWAKE_ALL); | |
| cookie = dma_fence_begin_signalling(); | |
| ss->guc.log = xe_guc_log_snapshot_capture(&guc->log, true); | |
| ss->guc.ct = xe_guc_ct_snapshot_capture(&guc->ct); | |
| ss->ge = xe_guc_exec_queue_snapshot_capture(q); | |
| if (job) | |
| ss->job = xe_sched_job_snapshot_capture(job); | |
| ss->vm = xe_vm_snapshot_capture(q->vm); | |
| xe_engine_snapshot_capture_for_queue(q); | |
| queue_work(system_dfl_wq, &ss->work); | |
| dma_fence_end_signalling(cookie); | |
| } | |
| /** | |
| * xe_devcoredump - Take the required snapshots and initialize coredump device. | |
| * @q: The faulty xe_exec_queue, where the issue was detected. | |
| * @job: The faulty xe_sched_job, where the issue was detected. | |
| * @fmt: Printf format + args to describe the reason for the core dump | |
| * | |
| * This function should be called at the crash time within the serialized | |
| * gt_reset. It is skipped if we still have the core dump device available | |
| * with the information of the 'first' snapshot. | |
| */ | |
| __printf(3, 4) | |
| void xe_devcoredump(struct xe_exec_queue *q, struct xe_sched_job *job, const char *fmt, ...) | |
| { | |
| struct xe_device *xe = gt_to_xe(q->gt); | |
| struct xe_devcoredump *coredump = &xe->devcoredump; | |
| va_list varg; | |
| mutex_lock(&coredump->lock); | |
| if (coredump->captured) { | |
| drm_dbg(&xe->drm, "Multiple hangs are occurring, but only the first snapshot was taken\n"); | |
| mutex_unlock(&coredump->lock); | |
| return; | |
| } | |
| coredump->captured = true; | |
| va_start(varg, fmt); | |
| coredump->snapshot.reason = kvasprintf(GFP_ATOMIC, fmt, varg); | |
| va_end(varg); | |
| devcoredump_snapshot(coredump, q, job); | |
| drm_info(&xe->drm, "Xe device coredump has been created\n"); | |
| drm_info(&xe->drm, "Check your /sys/class/drm/card%d/device/devcoredump/data\n", | |
| xe->drm.primary->index); | |
| mutex_unlock(&coredump->lock); | |
| } | |
| static void xe_driver_devcoredump_fini(void *arg) | |
| { | |
| struct drm_device *drm = arg; | |
| dev_coredump_put(drm->dev); | |
| } | |
| int xe_devcoredump_init(struct xe_device *xe) | |
| { | |
| int err; | |
| err = drmm_mutex_init(&xe->drm, &xe->devcoredump.lock); | |
| if (err) | |
| return err; | |
| if (IS_ENABLED(CONFIG_LOCKDEP)) { | |
| fs_reclaim_acquire(GFP_KERNEL); | |
| might_lock(&xe->devcoredump.lock); | |
| fs_reclaim_release(GFP_KERNEL); | |
| } | |
| return devm_add_action_or_reset(xe->drm.dev, xe_driver_devcoredump_fini, &xe->drm); | |
| } | |
| #endif | |
| /** | |
| * xe_print_blob_ascii85 - print a BLOB to some useful location in ASCII85 | |
| * | |
| * The output is split into multiple calls to drm_puts() because some print | |
| * targets, e.g. dmesg, cannot handle arbitrarily long lines. These targets may | |
| * add newlines, as is the case with dmesg: each drm_puts() call creates a | |
| * separate line. | |
| * | |
| * There is also a scheduler yield call to prevent the 'task has been stuck for | |
| * 120s' kernel hang check feature from firing when printing to a slow target | |
| * such as dmesg over a serial port. | |
| * | |
| * @p: the printer object to output to | |
| * @prefix: optional prefix to add to output string | |
| * @suffix: optional suffix to add at the end. 0 disables it and is | |
| * not added to the output, which is useful when using multiple calls | |
| * to dump data to @p | |
| * @blob: the Binary Large OBject to dump out | |
| * @offset: offset in bytes to skip from the front of the BLOB, must be a multiple of sizeof(u32) | |
| * @size: the size in bytes of the BLOB, must be a multiple of sizeof(u32) | |
| */ | |
| void xe_print_blob_ascii85(struct drm_printer *p, const char *prefix, char suffix, | |
| const void *blob, size_t offset, size_t size) | |
| { | |
| const u32 *blob32 = (const u32 *)blob; | |
| char buff[ASCII85_BUFSZ], *line_buff; | |
| size_t line_pos = 0; | |
| #define DMESG_MAX_LINE_LEN 800 | |
| /* Always leave space for the suffix char and the \0 */ | |
| #define MIN_SPACE (ASCII85_BUFSZ + 2) /* 85 + "<suffix>\0" */ | |
| if (size & 3) | |
| drm_printf(p, "Size not word aligned: %zu", size); | |
| if (offset & 3) | |
| drm_printf(p, "Offset not word aligned: %zu", offset); | |
| line_buff = kzalloc(DMESG_MAX_LINE_LEN, GFP_ATOMIC); | |
| if (!line_buff) { | |
| drm_printf(p, "Failed to allocate line buffer\n"); | |
| return; | |
| } | |
| blob32 += offset / sizeof(*blob32); | |
| size /= sizeof(*blob32); | |
| if (prefix) { | |
| strscpy(line_buff, prefix, DMESG_MAX_LINE_LEN - MIN_SPACE - 2); | |
| line_pos = strlen(line_buff); | |
| line_buff[line_pos++] = ':'; | |
| line_buff[line_pos++] = ' '; | |
| } | |
| while (size--) { | |
| u32 val = *(blob32++); | |
| strscpy(line_buff + line_pos, ascii85_encode(val, buff), | |
| DMESG_MAX_LINE_LEN - line_pos); | |
| line_pos += strlen(line_buff + line_pos); | |
| if ((line_pos + MIN_SPACE) >= DMESG_MAX_LINE_LEN) { | |
| line_buff[line_pos++] = 0; | |
| drm_puts(p, line_buff); | |
| line_pos = 0; | |
| /* Prevent 'stuck thread' time out errors */ | |
| cond_resched(); | |
| } | |
| } | |
| if (suffix) | |
| line_buff[line_pos++] = suffix; | |
| if (line_pos) { | |
| line_buff[line_pos++] = 0; | |
| drm_puts(p, line_buff); | |
| } | |
| kfree(line_buff); | |
| #undef MIN_SPACE | |
| #undef DMESG_MAX_LINE_LEN | |
| } |