| // SPDX-License-Identifier: GPL-2.0-only | |
| /* | |
| * Tegra host1x Command DMA | |
| * | |
| * Copyright (c) 2010-2013, NVIDIA Corporation. | |
| */ | |
| #include <linux/slab.h> | |
| #include <linux/scatterlist.h> | |
| #include <linux/dma-mapping.h> | |
| #include "../cdma.h" | |
| #include "../channel.h" | |
| #include "../dev.h" | |
| #include "../debug.h" | |
| /* | |
| * Put the restart at the end of pushbuffer memory | |
| */ | |
| static void push_buffer_init(struct push_buffer *pb) | |
| { | |
| *(u32 *)(pb->mapped + pb->size) = host1x_opcode_restart(0); | |
| } | |
| /* | |
| * Increment timedout buffer's syncpt via CPU. | |
| */ | |
| static void cdma_timeout_cpu_incr(struct host1x_cdma *cdma, u32 getptr, | |
| u32 syncpt_incrs, u32 syncval, u32 nr_slots) | |
| { | |
| unsigned int i; | |
| for (i = 0; i < syncpt_incrs; i++) | |
| host1x_syncpt_incr(cdma->timeout.syncpt); | |
| /* after CPU incr, ensure shadow is up to date */ | |
| host1x_syncpt_load(cdma->timeout.syncpt); | |
| } | |
| /* | |
| * Start channel DMA | |
| */ | |
| static void cdma_start(struct host1x_cdma *cdma) | |
| { | |
| struct host1x_channel *ch = cdma_to_channel(cdma); | |
| u64 start, end; | |
| if (cdma->running) | |
| return; | |
| cdma->last_pos = cdma->push_buffer.pos; | |
| start = cdma->push_buffer.dma; | |
| end = cdma->push_buffer.size + 4; | |
| host1x_ch_writel(ch, HOST1X_CHANNEL_DMACTRL_DMASTOP, | |
| HOST1X_CHANNEL_DMACTRL); | |
| /* set base, put and end pointer */ | |
| host1x_ch_writel(ch, lower_32_bits(start), HOST1X_CHANNEL_DMASTART); | |
| #if HOST1X_HW >= 6 | |
| host1x_ch_writel(ch, upper_32_bits(start), HOST1X_CHANNEL_DMASTART_HI); | |
| #endif | |
| host1x_ch_writel(ch, cdma->push_buffer.pos, HOST1X_CHANNEL_DMAPUT); | |
| #if HOST1X_HW >= 6 | |
| host1x_ch_writel(ch, 0, HOST1X_CHANNEL_DMAPUT_HI); | |
| #endif | |
| host1x_ch_writel(ch, lower_32_bits(end), HOST1X_CHANNEL_DMAEND); | |
| #if HOST1X_HW >= 6 | |
| host1x_ch_writel(ch, upper_32_bits(end), HOST1X_CHANNEL_DMAEND_HI); | |
| #endif | |
| /* reset GET */ | |
| host1x_ch_writel(ch, HOST1X_CHANNEL_DMACTRL_DMASTOP | | |
| HOST1X_CHANNEL_DMACTRL_DMAGETRST | | |
| HOST1X_CHANNEL_DMACTRL_DMAINITGET, | |
| HOST1X_CHANNEL_DMACTRL); | |
| /* start the command DMA */ | |
| host1x_ch_writel(ch, 0, HOST1X_CHANNEL_DMACTRL); | |
| cdma->running = true; | |
| } | |
| /* | |
| * Similar to cdma_start(), but rather than starting from an idle | |
| * state (where DMA GET is set to DMA PUT), on a timeout we restore | |
| * DMA GET from an explicit value (so DMA may again be pending). | |
| */ | |
| static void cdma_timeout_restart(struct host1x_cdma *cdma, u32 getptr) | |
| { | |
| struct host1x *host1x = cdma_to_host1x(cdma); | |
| struct host1x_channel *ch = cdma_to_channel(cdma); | |
| u64 start, end; | |
| if (cdma->running) | |
| return; | |
| cdma->last_pos = cdma->push_buffer.pos; | |
| host1x_ch_writel(ch, HOST1X_CHANNEL_DMACTRL_DMASTOP, | |
| HOST1X_CHANNEL_DMACTRL); | |
| start = cdma->push_buffer.dma; | |
| end = cdma->push_buffer.size + 4; | |
| /* set base, end pointer (all of memory) */ | |
| host1x_ch_writel(ch, lower_32_bits(start), HOST1X_CHANNEL_DMASTART); | |
| #if HOST1X_HW >= 6 | |
| host1x_ch_writel(ch, upper_32_bits(start), HOST1X_CHANNEL_DMASTART_HI); | |
| #endif | |
| host1x_ch_writel(ch, lower_32_bits(end), HOST1X_CHANNEL_DMAEND); | |
| #if HOST1X_HW >= 6 | |
| host1x_ch_writel(ch, upper_32_bits(end), HOST1X_CHANNEL_DMAEND_HI); | |
| #endif | |
| /* set GET, by loading the value in PUT (then reset GET) */ | |
| host1x_ch_writel(ch, getptr, HOST1X_CHANNEL_DMAPUT); | |
| host1x_ch_writel(ch, HOST1X_CHANNEL_DMACTRL_DMASTOP | | |
| HOST1X_CHANNEL_DMACTRL_DMAGETRST | | |
| HOST1X_CHANNEL_DMACTRL_DMAINITGET, | |
| HOST1X_CHANNEL_DMACTRL); | |
| dev_dbg(host1x->dev, | |
| "%s: DMA GET 0x%x, PUT HW 0x%x / shadow 0x%x\n", __func__, | |
| host1x_ch_readl(ch, HOST1X_CHANNEL_DMAGET), | |
| host1x_ch_readl(ch, HOST1X_CHANNEL_DMAPUT), | |
| cdma->last_pos); | |
| /* deassert GET reset and set PUT */ | |
| host1x_ch_writel(ch, HOST1X_CHANNEL_DMACTRL_DMASTOP, | |
| HOST1X_CHANNEL_DMACTRL); | |
| host1x_ch_writel(ch, cdma->push_buffer.pos, HOST1X_CHANNEL_DMAPUT); | |
| /* start the command DMA */ | |
| host1x_ch_writel(ch, 0, HOST1X_CHANNEL_DMACTRL); | |
| cdma->running = true; | |
| } | |
| /* | |
| * Kick channel DMA into action by writing its PUT offset (if it has changed) | |
| */ | |
| static void cdma_flush(struct host1x_cdma *cdma) | |
| { | |
| struct host1x_channel *ch = cdma_to_channel(cdma); | |
| if (cdma->push_buffer.pos != cdma->last_pos) { | |
| host1x_ch_writel(ch, cdma->push_buffer.pos, | |
| HOST1X_CHANNEL_DMAPUT); | |
| cdma->last_pos = cdma->push_buffer.pos; | |
| } | |
| } | |
| static void cdma_stop(struct host1x_cdma *cdma) | |
| { | |
| struct host1x_channel *ch = cdma_to_channel(cdma); | |
| mutex_lock(&cdma->lock); | |
| if (cdma->running) { | |
| host1x_cdma_wait_locked(cdma, CDMA_EVENT_SYNC_QUEUE_EMPTY); | |
| host1x_ch_writel(ch, HOST1X_CHANNEL_DMACTRL_DMASTOP, | |
| HOST1X_CHANNEL_DMACTRL); | |
| cdma->running = false; | |
| } | |
| mutex_unlock(&cdma->lock); | |
| } | |
| static void cdma_hw_cmdproc_stop(struct host1x *host, struct host1x_channel *ch, | |
| bool stop) | |
| { | |
| #if HOST1X_HW >= 6 | |
| host1x_ch_writel(ch, stop ? 0x1 : 0x0, HOST1X_CHANNEL_CMDPROC_STOP); | |
| #else | |
| u32 cmdproc_stop = host1x_sync_readl(host, HOST1X_SYNC_CMDPROC_STOP); | |
| if (stop) | |
| cmdproc_stop |= BIT(ch->id); | |
| else | |
| cmdproc_stop &= ~BIT(ch->id); | |
| host1x_sync_writel(host, cmdproc_stop, HOST1X_SYNC_CMDPROC_STOP); | |
| #endif | |
| } | |
| static void cdma_hw_teardown(struct host1x *host, struct host1x_channel *ch) | |
| { | |
| #if HOST1X_HW >= 6 | |
| host1x_ch_writel(ch, 0x1, HOST1X_CHANNEL_TEARDOWN); | |
| #else | |
| host1x_sync_writel(host, BIT(ch->id), HOST1X_SYNC_CH_TEARDOWN); | |
| #endif | |
| } | |
| /* | |
| * Stops both channel's command processor and CDMA immediately. | |
| * Also, tears down the channel and resets corresponding module. | |
| */ | |
| static void cdma_freeze(struct host1x_cdma *cdma) | |
| { | |
| struct host1x *host = cdma_to_host1x(cdma); | |
| struct host1x_channel *ch = cdma_to_channel(cdma); | |
| if (cdma->torndown && !cdma->running) { | |
| dev_warn(host->dev, "Already torn down\n"); | |
| return; | |
| } | |
| dev_dbg(host->dev, "freezing channel (id %d)\n", ch->id); | |
| cdma_hw_cmdproc_stop(host, ch, true); | |
| dev_dbg(host->dev, "%s: DMA GET 0x%x, PUT HW 0x%x / shadow 0x%x\n", | |
| __func__, host1x_ch_readl(ch, HOST1X_CHANNEL_DMAGET), | |
| host1x_ch_readl(ch, HOST1X_CHANNEL_DMAPUT), | |
| cdma->last_pos); | |
| host1x_ch_writel(ch, HOST1X_CHANNEL_DMACTRL_DMASTOP, | |
| HOST1X_CHANNEL_DMACTRL); | |
| cdma_hw_teardown(host, ch); | |
| cdma->running = false; | |
| cdma->torndown = true; | |
| } | |
| static void cdma_resume(struct host1x_cdma *cdma, u32 getptr) | |
| { | |
| struct host1x *host1x = cdma_to_host1x(cdma); | |
| struct host1x_channel *ch = cdma_to_channel(cdma); | |
| dev_dbg(host1x->dev, | |
| "resuming channel (id %u, DMAGET restart = 0x%x)\n", | |
| ch->id, getptr); | |
| cdma_hw_cmdproc_stop(host1x, ch, false); | |
| cdma->torndown = false; | |
| cdma_timeout_restart(cdma, getptr); | |
| } | |
| static void timeout_release_mlock(struct host1x_cdma *cdma) | |
| { | |
| #if HOST1X_HW >= 8 | |
| /* Tegra186 and Tegra194 require a more complicated MLOCK release | |
| * sequence. Furthermore, those chips by default don't enforce MLOCKs, | |
| * so it turns out that if we don't /actually/ need MLOCKs, we can just | |
| * ignore them. | |
| * | |
| * As such, for now just implement this on Tegra234 and above where things | |
| * are stricter but also easy to implement. | |
| */ | |
| struct host1x_channel *ch = cdma_to_channel(cdma); | |
| struct host1x *host1x = cdma_to_host1x(cdma); | |
| u32 offset; | |
| switch (ch->client->class) { | |
| case HOST1X_CLASS_VIC: | |
| offset = HOST1X_COMMON_VIC_MLOCK; | |
| break; | |
| #if HOST1X_HW == 8 | |
| case HOST1X_CLASS_NVJPG1: | |
| offset = HOST1X_COMMON_NVJPG1_MLOCK; | |
| break; | |
| case HOST1X_CLASS_NVENC: | |
| offset = HOST1X_COMMON_NVENC_MLOCK; | |
| break; | |
| case HOST1X_CLASS_NVJPG: | |
| offset = HOST1X_COMMON_NVJPG_MLOCK; | |
| break; | |
| case HOST1X_CLASS_NVDEC: | |
| offset = HOST1X_COMMON_NVDEC_MLOCK; | |
| break; | |
| case HOST1X_CLASS_OFA: | |
| offset = HOST1X_COMMON_OFA_MLOCK; | |
| break; | |
| #endif | |
| default: | |
| WARN(1, "%s was not updated for class %u", __func__, ch->client->class); | |
| return; | |
| } | |
| host1x_common_writel(host1x, 0x0, offset); | |
| #endif | |
| } | |
| /* | |
| * If this timeout fires, it indicates the current sync_queue entry has | |
| * exceeded its TTL and the userctx should be timed out and remaining | |
| * submits already issued cleaned up (future submits return an error). | |
| */ | |
| static void cdma_timeout_handler(struct work_struct *work) | |
| { | |
| u32 syncpt_val; | |
| struct host1x_cdma *cdma; | |
| struct host1x *host1x; | |
| struct host1x_channel *ch; | |
| cdma = container_of(to_delayed_work(work), struct host1x_cdma, | |
| timeout.wq); | |
| host1x = cdma_to_host1x(cdma); | |
| ch = cdma_to_channel(cdma); | |
| host1x_debug_dump(cdma_to_host1x(cdma)); | |
| mutex_lock(&cdma->lock); | |
| if (!cdma->timeout.client) { | |
| dev_dbg(host1x->dev, | |
| "cdma_timeout: expired, but has no clientid\n"); | |
| mutex_unlock(&cdma->lock); | |
| return; | |
| } | |
| /* stop processing to get a clean snapshot */ | |
| cdma_hw_cmdproc_stop(host1x, ch, true); | |
| syncpt_val = host1x_syncpt_load(cdma->timeout.syncpt); | |
| /* has buffer actually completed? */ | |
| if ((s32)(syncpt_val - cdma->timeout.syncpt_val) >= 0) { | |
| dev_dbg(host1x->dev, | |
| "cdma_timeout: expired, but buffer had completed\n"); | |
| /* restore */ | |
| cdma_hw_cmdproc_stop(host1x, ch, false); | |
| mutex_unlock(&cdma->lock); | |
| return; | |
| } | |
| dev_warn(host1x->dev, "%s: timeout: %u (%s), HW thresh %d, done %d\n", | |
| __func__, cdma->timeout.syncpt->id, cdma->timeout.syncpt->name, | |
| syncpt_val, cdma->timeout.syncpt_val); | |
| /* stop HW, resetting channel/module */ | |
| host1x_hw_cdma_freeze(host1x, cdma); | |
| /* release any held MLOCK */ | |
| timeout_release_mlock(cdma); | |
| host1x_cdma_update_sync_queue(cdma, ch->dev); | |
| mutex_unlock(&cdma->lock); | |
| } | |
| /* | |
| * Init timeout resources | |
| */ | |
| static int cdma_timeout_init(struct host1x_cdma *cdma) | |
| { | |
| INIT_DELAYED_WORK(&cdma->timeout.wq, cdma_timeout_handler); | |
| cdma->timeout.initialized = true; | |
| return 0; | |
| } | |
| /* | |
| * Clean up timeout resources | |
| */ | |
| static void cdma_timeout_destroy(struct host1x_cdma *cdma) | |
| { | |
| if (cdma->timeout.initialized) | |
| cancel_delayed_work_sync(&cdma->timeout.wq); | |
| cdma->timeout.initialized = false; | |
| } | |
| static const struct host1x_cdma_ops host1x_cdma_ops = { | |
| .start = cdma_start, | |
| .stop = cdma_stop, | |
| .flush = cdma_flush, | |
| .timeout_init = cdma_timeout_init, | |
| .timeout_destroy = cdma_timeout_destroy, | |
| .freeze = cdma_freeze, | |
| .resume = cdma_resume, | |
| .timeout_cpu_incr = cdma_timeout_cpu_incr, | |
| }; | |
| static const struct host1x_pushbuffer_ops host1x_pushbuffer_ops = { | |
| .init = push_buffer_init, | |
| }; |