| // SPDX-License-Identifier: GPL-2.0-or-later | |
| /* | |
| * OnKey device driver for DA9063, DA9062 and DA9061 PMICs | |
| * Copyright (C) 2015 Dialog Semiconductor Ltd. | |
| */ | |
| #include <linux/devm-helpers.h> | |
| #include <linux/module.h> | |
| #include <linux/errno.h> | |
| #include <linux/input.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/pm_wakeirq.h> | |
| #include <linux/property.h> | |
| #include <linux/workqueue.h> | |
| #include <linux/regmap.h> | |
| #include <linux/mfd/da9063/core.h> | |
| #include <linux/mfd/da9063/registers.h> | |
| #include <linux/mfd/da9062/core.h> | |
| #include <linux/mfd/da9062/registers.h> | |
| struct da906x_chip_config { | |
| /* REGS */ | |
| int onkey_status; | |
| int onkey_pwr_signalling; | |
| int onkey_fault_log; | |
| int onkey_shutdown; | |
| /* MASKS */ | |
| int onkey_nonkey_mask; | |
| int onkey_nonkey_lock_mask; | |
| int onkey_key_reset_mask; | |
| int onkey_shutdown_mask; | |
| /* NAMES */ | |
| const char *name; | |
| }; | |
| struct da9063_onkey { | |
| struct delayed_work work; | |
| struct input_dev *input; | |
| struct device *dev; | |
| struct regmap *regmap; | |
| const struct da906x_chip_config *config; | |
| char phys[32]; | |
| bool key_power; | |
| }; | |
| static const struct da906x_chip_config da9063_regs = { | |
| /* REGS */ | |
| .onkey_status = DA9063_REG_STATUS_A, | |
| .onkey_pwr_signalling = DA9063_REG_CONTROL_B, | |
| .onkey_fault_log = DA9063_REG_FAULT_LOG, | |
| .onkey_shutdown = DA9063_REG_CONTROL_F, | |
| /* MASKS */ | |
| .onkey_nonkey_mask = DA9063_NONKEY, | |
| .onkey_nonkey_lock_mask = DA9063_NONKEY_LOCK, | |
| .onkey_key_reset_mask = DA9063_KEY_RESET, | |
| .onkey_shutdown_mask = DA9063_SHUTDOWN, | |
| /* NAMES */ | |
| .name = DA9063_DRVNAME_ONKEY, | |
| }; | |
| static const struct da906x_chip_config da9062_regs = { | |
| /* REGS */ | |
| .onkey_status = DA9062AA_STATUS_A, | |
| .onkey_pwr_signalling = DA9062AA_CONTROL_B, | |
| .onkey_fault_log = DA9062AA_FAULT_LOG, | |
| .onkey_shutdown = DA9062AA_CONTROL_F, | |
| /* MASKS */ | |
| .onkey_nonkey_mask = DA9062AA_NONKEY_MASK, | |
| .onkey_nonkey_lock_mask = DA9062AA_NONKEY_LOCK_MASK, | |
| .onkey_key_reset_mask = DA9062AA_KEY_RESET_MASK, | |
| .onkey_shutdown_mask = DA9062AA_SHUTDOWN_MASK, | |
| /* NAMES */ | |
| .name = "da9062-onkey", | |
| }; | |
| static void da9063_poll_on(struct work_struct *work) | |
| { | |
| struct da9063_onkey *onkey = container_of(work, | |
| struct da9063_onkey, | |
| work.work); | |
| const struct da906x_chip_config *config = onkey->config; | |
| unsigned int val; | |
| int fault_log = 0; | |
| bool poll = true; | |
| int error; | |
| /* Poll to see when the pin is released */ | |
| error = regmap_read(onkey->regmap, | |
| config->onkey_status, | |
| &val); | |
| if (error) { | |
| dev_err(onkey->dev, | |
| "Failed to read ON status: %d\n", error); | |
| goto err_poll; | |
| } | |
| if (!(val & config->onkey_nonkey_mask)) { | |
| error = regmap_update_bits(onkey->regmap, | |
| config->onkey_pwr_signalling, | |
| config->onkey_nonkey_lock_mask, | |
| 0); | |
| if (error) { | |
| dev_err(onkey->dev, | |
| "Failed to reset the Key Delay %d\n", error); | |
| goto err_poll; | |
| } | |
| input_report_key(onkey->input, KEY_POWER, 0); | |
| input_sync(onkey->input); | |
| poll = false; | |
| } | |
| /* | |
| * If the fault log KEY_RESET is detected, then clear it | |
| * and shut down the system. | |
| */ | |
| error = regmap_read(onkey->regmap, | |
| config->onkey_fault_log, | |
| &fault_log); | |
| if (error) { | |
| dev_warn(&onkey->input->dev, | |
| "Cannot read FAULT_LOG: %d\n", error); | |
| } else if (fault_log & config->onkey_key_reset_mask) { | |
| error = regmap_write(onkey->regmap, | |
| config->onkey_fault_log, | |
| config->onkey_key_reset_mask); | |
| if (error) { | |
| dev_warn(&onkey->input->dev, | |
| "Cannot reset KEY_RESET fault log: %d\n", | |
| error); | |
| } else { | |
| /* at this point we do any S/W housekeeping | |
| * and then send shutdown command | |
| */ | |
| dev_dbg(&onkey->input->dev, | |
| "Sending SHUTDOWN to PMIC ...\n"); | |
| error = regmap_write(onkey->regmap, | |
| config->onkey_shutdown, | |
| config->onkey_shutdown_mask); | |
| if (error) | |
| dev_err(&onkey->input->dev, | |
| "Cannot SHUTDOWN PMIC: %d\n", | |
| error); | |
| } | |
| } | |
| err_poll: | |
| if (poll) | |
| schedule_delayed_work(&onkey->work, msecs_to_jiffies(50)); | |
| } | |
| static irqreturn_t da9063_onkey_irq_handler(int irq, void *data) | |
| { | |
| struct da9063_onkey *onkey = data; | |
| const struct da906x_chip_config *config = onkey->config; | |
| unsigned int val; | |
| int error; | |
| error = regmap_read(onkey->regmap, | |
| config->onkey_status, | |
| &val); | |
| if (onkey->key_power && !error && (val & config->onkey_nonkey_mask)) { | |
| input_report_key(onkey->input, KEY_POWER, 1); | |
| input_sync(onkey->input); | |
| schedule_delayed_work(&onkey->work, 0); | |
| dev_dbg(onkey->dev, "KEY_POWER long press.\n"); | |
| } else { | |
| input_report_key(onkey->input, KEY_POWER, 1); | |
| input_sync(onkey->input); | |
| input_report_key(onkey->input, KEY_POWER, 0); | |
| input_sync(onkey->input); | |
| dev_dbg(onkey->dev, "KEY_POWER short press.\n"); | |
| } | |
| return IRQ_HANDLED; | |
| } | |
| static int da9063_onkey_probe(struct platform_device *pdev) | |
| { | |
| struct da9063_onkey *onkey; | |
| int error; | |
| int irq; | |
| onkey = devm_kzalloc(&pdev->dev, sizeof(struct da9063_onkey), | |
| GFP_KERNEL); | |
| if (!onkey) | |
| return -ENOMEM; | |
| onkey->config = device_get_match_data(&pdev->dev); | |
| if (!onkey->config) | |
| return -ENXIO; | |
| onkey->dev = &pdev->dev; | |
| onkey->regmap = dev_get_regmap(pdev->dev.parent, NULL); | |
| if (!onkey->regmap) | |
| return dev_err_probe(&pdev->dev, -ENXIO, | |
| "Parent regmap unavailable.\n"); | |
| onkey->key_power = !device_property_read_bool(&pdev->dev, | |
| "dlg,disable-key-power"); | |
| onkey->input = devm_input_allocate_device(&pdev->dev); | |
| if (!onkey->input) | |
| return -ENOMEM; | |
| onkey->input->name = onkey->config->name; | |
| snprintf(onkey->phys, sizeof(onkey->phys), "%s/input0", | |
| onkey->config->name); | |
| onkey->input->phys = onkey->phys; | |
| input_set_capability(onkey->input, EV_KEY, KEY_POWER); | |
| error = devm_delayed_work_autocancel(&pdev->dev, &onkey->work, | |
| da9063_poll_on); | |
| if (error) | |
| return error; | |
| irq = platform_get_irq_byname(pdev, "ONKEY"); | |
| if (irq < 0) | |
| return irq; | |
| error = devm_request_threaded_irq(&pdev->dev, irq, | |
| NULL, da9063_onkey_irq_handler, | |
| IRQF_TRIGGER_LOW | IRQF_ONESHOT, | |
| "ONKEY", onkey); | |
| if (error) | |
| return dev_err_probe(&pdev->dev, error, | |
| "Failed to allocate onkey IRQ\n"); | |
| error = dev_pm_set_wake_irq(&pdev->dev, irq); | |
| if (error) | |
| dev_warn(&pdev->dev, | |
| "Failed to set IRQ %d as a wake IRQ: %d\n", | |
| irq, error); | |
| else | |
| device_init_wakeup(&pdev->dev, true); | |
| error = input_register_device(onkey->input); | |
| if (error) | |
| return error; | |
| return 0; | |
| } | |
| static const struct of_device_id da9063_compatible_reg_id_table[] = { | |
| { .compatible = "dlg,da9063-onkey", .data = &da9063_regs }, | |
| { .compatible = "dlg,da9062-onkey", .data = &da9062_regs }, | |
| { } | |
| }; | |
| MODULE_DEVICE_TABLE(of, da9063_compatible_reg_id_table); | |
| static struct platform_driver da9063_onkey_driver = { | |
| .probe = da9063_onkey_probe, | |
| .driver = { | |
| .name = DA9063_DRVNAME_ONKEY, | |
| .of_match_table = da9063_compatible_reg_id_table, | |
| }, | |
| }; | |
| module_platform_driver(da9063_onkey_driver); | |
| MODULE_AUTHOR("S Twiss <stwiss.opensource@diasemi.com>"); | |
| MODULE_DESCRIPTION("Onkey device driver for Dialog DA9063, DA9062 and DA9061"); | |
| MODULE_LICENSE("GPL"); | |
| MODULE_ALIAS("platform:" DA9063_DRVNAME_ONKEY); |