drivers/tee/optee/optee_msg.h

/* SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) */
/*
 * Copyright (c) 2015-2021, Linaro Limited
 */
#ifndef _OPTEE_MSG_H
#define _OPTEE_MSG_H

#include <linux/bitops.h>
#include <linux/types.h>

/*
 * This file defines the OP-TEE message protocol (ABI) used to communicate
 * with an instance of OP-TEE running in secure world.
 *
 * This file is divided into two sections.
 * 1. Formatting of messages.
 * 2. Requests from normal world
 */

/*****************************************************************************
 * Part 1 - formatting of messages
 *****************************************************************************/

#define OPTEE_MSG_ATTR_TYPE_NONE		0x0
#define OPTEE_MSG_ATTR_TYPE_VALUE_INPUT		0x1
#define OPTEE_MSG_ATTR_TYPE_VALUE_OUTPUT	0x2
#define OPTEE_MSG_ATTR_TYPE_VALUE_INOUT		0x3
#define OPTEE_MSG_ATTR_TYPE_RMEM_INPUT		0x5
#define OPTEE_MSG_ATTR_TYPE_RMEM_OUTPUT		0x6
#define OPTEE_MSG_ATTR_TYPE_RMEM_INOUT		0x7
#define OPTEE_MSG_ATTR_TYPE_FMEM_INPUT		OPTEE_MSG_ATTR_TYPE_RMEM_INPUT
#define OPTEE_MSG_ATTR_TYPE_FMEM_OUTPUT		OPTEE_MSG_ATTR_TYPE_RMEM_OUTPUT
#define OPTEE_MSG_ATTR_TYPE_FMEM_INOUT		OPTEE_MSG_ATTR_TYPE_RMEM_INOUT
#define OPTEE_MSG_ATTR_TYPE_TMEM_INPUT		0x9
#define OPTEE_MSG_ATTR_TYPE_TMEM_OUTPUT		0xa
#define OPTEE_MSG_ATTR_TYPE_TMEM_INOUT		0xb

#define OPTEE_MSG_ATTR_TYPE_MASK		GENMASK(7, 0)

/*
 * Meta parameter to be absorbed by the Secure OS and not passed
 * to the Trusted Application.
 *
 * Currently only used with OPTEE_MSG_CMD_OPEN_SESSION.
 */
#define OPTEE_MSG_ATTR_META			BIT(8)

/*
 * Pointer to a list of pages used to register user-defined SHM buffer.
 * Used with OPTEE_MSG_ATTR_TYPE_TMEM_*.
 * buf_ptr should point to the beginning of the buffer. Buffer will contain
 * list of page addresses. OP-TEE core can reconstruct contiguous buffer from
 * that page addresses list. Page addresses are stored as 64 bit values.
 * Last entry on a page should point to the next page of buffer.
 * Every entry in buffer should point to a 4k page beginning (12 least
 * significant bits must be equal to zero).
 *
 * 12 least significant bits of optee_msg_param.u.tmem.buf_ptr should hold
 * page offset of user buffer.
 *
 * So, entries should be placed like members of this structure:
 *
 * struct page_data {
 *   uint64_t pages_array[OPTEE_MSG_NONCONTIG_PAGE_SIZE/sizeof(uint64_t) - 1];
 *   uint64_t next_page_data;
 * };
 *
 * Structure is designed to exactly fit into the page size
 * OPTEE_MSG_NONCONTIG_PAGE_SIZE which is a standard 4KB page.
 *
 * The size of 4KB is chosen because this is the smallest page size for ARM
 * architectures. If REE uses larger pages, it should divide them to 4KB ones.
 */
#define OPTEE_MSG_ATTR_NONCONTIG		BIT(9)

/*
 * Memory attributes for caching passed with temp memrefs. The actual value
 * used is defined outside the message protocol with the exception of
 * OPTEE_MSG_ATTR_CACHE_PREDEFINED which means the attributes already
 * defined for the memory range should be used. If optee_smc.h is used as
 * bearer of this protocol OPTEE_SMC_SHM_* is used for values.
 */
#define OPTEE_MSG_ATTR_CACHE_SHIFT		16
#define OPTEE_MSG_ATTR_CACHE_MASK		GENMASK(2, 0)
#define OPTEE_MSG_ATTR_CACHE_PREDEFINED		0

/*
 * Same values as TEE_LOGIN_* from TEE Internal API
 */
#define OPTEE_MSG_LOGIN_PUBLIC			0x00000000
#define OPTEE_MSG_LOGIN_USER			0x00000001
#define OPTEE_MSG_LOGIN_GROUP			0x00000002
#define OPTEE_MSG_LOGIN_APPLICATION		0x00000004
#define OPTEE_MSG_LOGIN_APPLICATION_USER	0x00000005
#define OPTEE_MSG_LOGIN_APPLICATION_GROUP	0x00000006

/*
 * Page size used in non-contiguous buffer entries
 */
#define OPTEE_MSG_NONCONTIG_PAGE_SIZE		4096

#define OPTEE_MSG_FMEM_INVALID_GLOBAL_ID	0xffffffffffffffff

/**
 * struct optee_msg_param_tmem - temporary memory reference parameter
 * @buf_ptr:	address of the buffer
 * @size:	size of the buffer
 * @shm_ref:	temporary shared memory reference, pointer to a struct tee_shm
 *
 * Secure and normal world communicates pointers as physical address
 * instead of the virtual address. This is because secure and normal world
 * have completely independent memory mapping. Normal world can even have a
 * hypervisor which need to translate the guest physical address (AKA IPA
 * in ARM documentation) to a real physical address before passing the
 * structure to secure world.
 */
struct optee_msg_param_tmem {
	u64 buf_ptr;
	u64 size;
	u64 shm_ref;
};

/**
 * struct optee_msg_param_rmem - registered memory reference parameter
 * @offs:	offset into shared memory reference
 * @size:	size of the buffer
 * @shm_ref:	shared memory reference, pointer to a struct tee_shm
 */
struct optee_msg_param_rmem {
	u64 offs;
	u64 size;
	u64 shm_ref;
};

/**
 * struct optee_msg_param_fmem - FF-A memory reference parameter
 * @offs_low:		lower bits of offset into shared memory reference
 * @offs_high:		higher bits of offset into shared memory reference
 * @internal_offs:	offset into the first 4 KiB page of the FF-A shared
 *			memory region
 * @size:		size of the buffer
 * @global_id:		global identifier of the shared memory
 */
struct optee_msg_param_fmem {
	u32 offs_low;
	u16 offs_high;
	u16 internal_offs;
	u64 size;
	u64 global_id;
};

/**
 * struct optee_msg_param_value - opaque value parameter
 * @a: first opaque value
 * @b: second opaque value
 * @c: third opaque value
 *
 * Value parameters are passed unchecked between normal and secure world.
 */
struct optee_msg_param_value {
	u64 a;
	u64 b;
	u64 c;
};

/**
 * struct optee_msg_param - parameter used together with struct optee_msg_arg
 * @attr:	attributes
 * @tmem:	parameter by temporary memory reference
 * @rmem:	parameter by registered memory reference
 * @fmem:	parameter by FF-A registered memory reference
 * @value:	parameter by opaque value
 * @octets:	parameter by octet string
 * @u:		union holding OP-TEE msg parameter
 *
 * @attr & OPTEE_MSG_ATTR_TYPE_MASK indicates if tmem, rmem or value is used in
 * the union. OPTEE_MSG_ATTR_TYPE_VALUE_* indicates value or octets,
 * OPTEE_MSG_ATTR_TYPE_TMEM_* indicates @tmem and
 * OPTEE_MSG_ATTR_TYPE_RMEM_* or the alias PTEE_MSG_ATTR_TYPE_FMEM_* indicates
 * @rmem or @fmem depending on the conduit.
 * OPTEE_MSG_ATTR_TYPE_NONE indicates that none of the members are used.
 */
struct optee_msg_param {
	u64 attr;
	union {
		struct optee_msg_param_tmem tmem;
		struct optee_msg_param_rmem rmem;
		struct optee_msg_param_fmem fmem;
		struct optee_msg_param_value value;
		u8 octets[24];
	} u;
};

/**
 * struct optee_msg_arg - call argument
 * @cmd:	command, one of OPTEE_MSG_CMD_* or OPTEE_MSG_RPC_CMD_*
 * @func:	Trusted Application function, specific to the Trusted
 *		Application, used if cmd == OPTEE_MSG_CMD_INVOKE_COMMAND
 * @session:	in parameter for all OPTEE_MSG_CMD_* except
 *		OPTEE_MSG_CMD_OPEN_SESSION where it's an output parameter
 *		instead
 * @cancel_id:	cancellation id, a unique value to identify this request
 * @pad:	padding for alignment
 * @ret:	return value
 * @ret_origin:	origin of the return value
 * @num_params:	number of parameters supplied to the OS Command
 * @params:	the parameters supplied to the OS Command
 *
 * All normal calls to Trusted OS uses this struct. If cmd requires further
 * information than what these fields hold it can be passed as a parameter
 * tagged as meta (setting the OPTEE_MSG_ATTR_META bit in corresponding
 * attrs field). All parameters tagged as meta have to come first.
 */
struct optee_msg_arg {
	u32 cmd;
	u32 func;
	u32 session;
	u32 cancel_id;
	u32 pad;
	u32 ret;
	u32 ret_origin;
	u32 num_params;

	/* num_params tells the actual number of element in params */
	struct optee_msg_param params[];
};

/**
 * OPTEE_MSG_GET_ARG_SIZE - return size of struct optee_msg_arg
 *
 * @num_params: Number of parameters embedded in the struct optee_msg_arg
 *
 * Returns the size of the struct optee_msg_arg together with the number
 * of embedded parameters.
 */
#define OPTEE_MSG_GET_ARG_SIZE(num_params) \
	(sizeof(struct optee_msg_arg) + \
	 sizeof(struct optee_msg_param) * (num_params))

/*****************************************************************************
 * Part 2 - requests from normal world
 *****************************************************************************/

/*
 * Return the following UID if using API specified in this file without
 * further extensions:
 * 384fb3e0-e7f8-11e3-af63-0002a5d5c51b.
 * Represented in 4 32-bit words in OPTEE_MSG_UID_0, OPTEE_MSG_UID_1,
 * OPTEE_MSG_UID_2, OPTEE_MSG_UID_3.
 *
 * In the case where the OP-TEE image is loaded by the kernel, this will
 * initially return an alternate UID to reflect that we are communicating with
 * the TF-A image loading service at that time instead of OP-TEE. That UID is:
 * a3fbeab1-1246-315d-c7c4-06b9c03cbea4.
 * Represented in 4 32-bit words in OPTEE_MSG_IMAGE_LOAD_UID_0,
 * OPTEE_MSG_IMAGE_LOAD_UID_1, OPTEE_MSG_IMAGE_LOAD_UID_2,
 * OPTEE_MSG_IMAGE_LOAD_UID_3.
 */
#define OPTEE_MSG_UID_0			0x384fb3e0
#define OPTEE_MSG_UID_1			0xe7f811e3
#define OPTEE_MSG_UID_2			0xaf630002
#define OPTEE_MSG_UID_3			0xa5d5c51b
#define OPTEE_MSG_IMAGE_LOAD_UID_0	0xa3fbeab1
#define OPTEE_MSG_IMAGE_LOAD_UID_1	0x1246315d
#define OPTEE_MSG_IMAGE_LOAD_UID_2	0xc7c406b9
#define OPTEE_MSG_IMAGE_LOAD_UID_3	0xc03cbea4
#define OPTEE_MSG_FUNCID_CALLS_UID	0xFF01

/*
 * Returns 2.0 if using API specified in this file without further
 * extensions. Represented in 2 32-bit words in OPTEE_MSG_REVISION_MAJOR
 * and OPTEE_MSG_REVISION_MINOR
 */
#define OPTEE_MSG_REVISION_MAJOR	2
#define OPTEE_MSG_REVISION_MINOR	0
#define OPTEE_MSG_FUNCID_CALLS_REVISION	0xFF03

/*
 * Get UUID of Trusted OS.
 *
 * Used by non-secure world to figure out which Trusted OS is installed.
 * Note that returned UUID is the UUID of the Trusted OS, not of the API.
 *
 * Returns UUID in 4 32-bit words in the same way as
 * OPTEE_MSG_FUNCID_CALLS_UID described above.
 */
#define OPTEE_MSG_OS_OPTEE_UUID_0	0x486178e0
#define OPTEE_MSG_OS_OPTEE_UUID_1	0xe7f811e3
#define OPTEE_MSG_OS_OPTEE_UUID_2	0xbc5e0002
#define OPTEE_MSG_OS_OPTEE_UUID_3	0xa5d5c51b
#define OPTEE_MSG_FUNCID_GET_OS_UUID	0x0000

/*
 * Get revision of Trusted OS.
 *
 * Used by non-secure world to figure out which version of the Trusted OS
 * is installed. Note that the returned revision is the revision of the
 * Trusted OS, not of the API.
 *
 * Returns revision in 2 32-bit words in the same way as
 * OPTEE_MSG_CALLS_REVISION described above.
 */
#define OPTEE_MSG_FUNCID_GET_OS_REVISION	0x0001

/*
 * Values used in OPTEE_MSG_CMD_LEND_PROTMEM below
 * OPTEE_MSG_PROTMEM_RESERVED		Reserved
 * OPTEE_MSG_PROTMEM_SECURE_VIDEO_PLAY	Secure Video Playback
 * OPTEE_MSG_PROTMEM_TRUSTED_UI		Trused UI
 * OPTEE_MSG_PROTMEM_SECURE_VIDEO_RECORD	Secure Video Recording
 */
#define OPTEE_MSG_PROTMEM_RESERVED		0
#define OPTEE_MSG_PROTMEM_SECURE_VIDEO_PLAY	1
#define OPTEE_MSG_PROTMEM_TRUSTED_UI		2
#define OPTEE_MSG_PROTMEM_SECURE_VIDEO_RECORD	3

/*
 * Do a secure call with struct optee_msg_arg as argument
 * The OPTEE_MSG_CMD_* below defines what goes in struct optee_msg_arg::cmd
 *
 * OPTEE_MSG_CMD_OPEN_SESSION opens a session to a Trusted Application.
 * The first two parameters are tagged as meta, holding two value
 * parameters to pass the following information:
 * param[0].u.value.a-b uuid of Trusted Application
 * param[1].u.value.a-b uuid of Client
 * param[1].u.value.c Login class of client OPTEE_MSG_LOGIN_*
 *
 * OPTEE_MSG_CMD_INVOKE_COMMAND invokes a command a previously opened
 * session to a Trusted Application.  struct optee_msg_arg::func is Trusted
 * Application function, specific to the Trusted Application.
 *
 * OPTEE_MSG_CMD_CLOSE_SESSION closes a previously opened session to
 * Trusted Application.
 *
 * OPTEE_MSG_CMD_CANCEL cancels a currently invoked command.
 *
 * OPTEE_MSG_CMD_REGISTER_SHM registers a shared memory reference. The
 * information is passed as:
 * [in] param[0].attr			OPTEE_MSG_ATTR_TYPE_TMEM_INPUT
 *					[| OPTEE_MSG_ATTR_NONCONTIG]
 * [in] param[0].u.tmem.buf_ptr		physical address (of first fragment)
 * [in] param[0].u.tmem.size		size (of first fragment)
 * [in] param[0].u.tmem.shm_ref		holds shared memory reference
 *
 * OPTEE_MSG_CMD_UNREGISTER_SHM unregisters a previously registered shared
 * memory reference. The information is passed as:
 * [in] param[0].attr			OPTEE_MSG_ATTR_TYPE_RMEM_INPUT
 * [in] param[0].u.rmem.shm_ref		holds shared memory reference
 * [in] param[0].u.rmem.offs		0
 * [in] param[0].u.rmem.size		0
 *
 * OPTEE_MSG_CMD_DO_BOTTOM_HALF does the scheduled bottom half processing
 * of a driver.
 *
 * OPTEE_MSG_CMD_STOP_ASYNC_NOTIF informs secure world that from now is
 * normal world unable to process asynchronous notifications. Typically
 * used when the driver is shut down.
 *
 * OPTEE_MSG_CMD_LEND_PROTMEM lends protected memory. The passed normal
 * physical memory is protected from normal world access. The memory
 * should be unmapped prior to this call since it becomes inaccessible
 * during the request.
 * Parameters are passed as:
 * [in] param[0].attr			OPTEE_MSG_ATTR_TYPE_VALUE_INPUT
 * [in] param[0].u.value.a		OPTEE_MSG_PROTMEM_* defined above
 * [in] param[1].attr			OPTEE_MSG_ATTR_TYPE_TMEM_INPUT
 * [in] param[1].u.tmem.buf_ptr		physical address
 * [in] param[1].u.tmem.size		size
 * [in] param[1].u.tmem.shm_ref		holds protected memory reference
 *
 * OPTEE_MSG_CMD_RECLAIM_PROTMEM reclaims a previously lent protected
 * memory reference. The physical memory is accessible by the normal world
 * after this function has return and can be mapped again. The information
 * is passed as:
 * [in] param[0].attr			OPTEE_MSG_ATTR_TYPE_VALUE_INPUT
 * [in] param[0].u.value.a		holds protected memory cookie
 *
 * OPTEE_MSG_CMD_GET_PROTMEM_CONFIG get configuration for a specific
 * protected memory use case. Parameters are passed as:
 * [in] param[0].attr			OPTEE_MSG_ATTR_TYPE_VALUE_INOUT
 * [in] param[0].value.a		OPTEE_MSG_PROTMEM_*
 * [in] param[1].attr			OPTEE_MSG_ATTR_TYPE_{R,F}MEM_OUTPUT
 * [in] param[1].u.{r,f}mem		Buffer or NULL
 * [in] param[1].u.{r,f}mem.size	Provided size of buffer or 0 for query
 * output for the protected use case:
 * [out] param[0].value.a		Minimal size of protected memory
 * [out] param[0].value.b		Required alignment of size and start of
 *					protected memory
 * [out] param[0].value.c               PA width, max 64
 * [out] param[1].{r,f}mem.size		Size of output data
 * [out] param[1].{r,f}mem		If non-NULL, contains an array of
 *					uint32_t memory attributes that must be
 *					included when lending memory for this
 *					use case
 *
 * OPTEE_MSG_CMD_ASSIGN_PROTMEM assigns use-case to protected memory
 * previously lent using the FFA_LEND framework ABI. Parameters are passed
 * as:
 * [in] param[0].attr			OPTEE_MSG_ATTR_TYPE_VALUE_INPUT
 * [in] param[0].u.value.a		holds protected memory cookie
 * [in] param[0].u.value.b		OPTEE_MSG_PROTMEM_* defined above
 */
#define OPTEE_MSG_CMD_OPEN_SESSION		0
#define OPTEE_MSG_CMD_INVOKE_COMMAND		1
#define OPTEE_MSG_CMD_CLOSE_SESSION		2
#define OPTEE_MSG_CMD_CANCEL			3
#define OPTEE_MSG_CMD_REGISTER_SHM		4
#define OPTEE_MSG_CMD_UNREGISTER_SHM		5
#define OPTEE_MSG_CMD_DO_BOTTOM_HALF		6
#define OPTEE_MSG_CMD_STOP_ASYNC_NOTIF		7
#define OPTEE_MSG_CMD_LEND_PROTMEM		8
#define OPTEE_MSG_CMD_RECLAIM_PROTMEM		9
#define OPTEE_MSG_CMD_GET_PROTMEM_CONFIG	10
#define OPTEE_MSG_CMD_ASSIGN_PROTMEM		11
#define OPTEE_MSG_FUNCID_CALL_WITH_ARG		0x0004

#endif /* _OPTEE_MSG_H */