| // SPDX-License-Identifier: GPL-2.0 | |
| /* | |
| * Pressure stall information for CPU, memory and IO | |
| * | |
| * Copyright (c) 2018 Facebook, Inc. | |
| * Author: Johannes Weiner <hannes@cmpxchg.org> | |
| * | |
| * Polling support by Suren Baghdasaryan <surenb@google.com> | |
| * Copyright (c) 2018 Google, Inc. | |
| * | |
| * When CPU, memory and IO are contended, tasks experience delays that | |
| * reduce throughput and introduce latencies into the workload. Memory | |
| * and IO contention, in addition, can cause a full loss of forward | |
| * progress in which the CPU goes idle. | |
| * | |
| * This code aggregates individual task delays into resource pressure | |
| * metrics that indicate problems with both workload health and | |
| * resource utilization. | |
| * | |
| * Model | |
| * | |
| * The time in which a task can execute on a CPU is our baseline for | |
| * productivity. Pressure expresses the amount of time in which this | |
| * potential cannot be realized due to resource contention. | |
| * | |
| * This concept of productivity has two components: the workload and | |
| * the CPU. To measure the impact of pressure on both, we define two | |
| * contention states for a resource: SOME and FULL. | |
| * | |
| * In the SOME state of a given resource, one or more tasks are | |
| * delayed on that resource. This affects the workload's ability to | |
| * perform work, but the CPU may still be executing other tasks. | |
| * | |
| * In the FULL state of a given resource, all non-idle tasks are | |
| * delayed on that resource such that nobody is advancing and the CPU | |
| * goes idle. This leaves both workload and CPU unproductive. | |
| * | |
| * SOME = nr_delayed_tasks != 0 | |
| * FULL = nr_delayed_tasks != 0 && nr_productive_tasks == 0 | |
| * | |
| * What it means for a task to be productive is defined differently | |
| * for each resource. For IO, productive means a running task. For | |
| * memory, productive means a running task that isn't a reclaimer. For | |
| * CPU, productive means an on-CPU task. | |
| * | |
| * Naturally, the FULL state doesn't exist for the CPU resource at the | |
| * system level, but exist at the cgroup level. At the cgroup level, | |
| * FULL means all non-idle tasks in the cgroup are delayed on the CPU | |
| * resource which is being used by others outside of the cgroup or | |
| * throttled by the cgroup cpu.max configuration. | |
| * | |
| * The percentage of wall clock time spent in those compound stall | |
| * states gives pressure numbers between 0 and 100 for each resource, | |
| * where the SOME percentage indicates workload slowdowns and the FULL | |
| * percentage indicates reduced CPU utilization: | |
| * | |
| * %SOME = time(SOME) / period | |
| * %FULL = time(FULL) / period | |
| * | |
| * Multiple CPUs | |
| * | |
| * The more tasks and available CPUs there are, the more work can be | |
| * performed concurrently. This means that the potential that can go | |
| * unrealized due to resource contention *also* scales with non-idle | |
| * tasks and CPUs. | |
| * | |
| * Consider a scenario where 257 number crunching tasks are trying to | |
| * run concurrently on 256 CPUs. If we simply aggregated the task | |
| * states, we would have to conclude a CPU SOME pressure number of | |
| * 100%, since *somebody* is waiting on a runqueue at all | |
| * times. However, that is clearly not the amount of contention the | |
| * workload is experiencing: only one out of 256 possible execution | |
| * threads will be contended at any given time, or about 0.4%. | |
| * | |
| * Conversely, consider a scenario of 4 tasks and 4 CPUs where at any | |
| * given time *one* of the tasks is delayed due to a lack of memory. | |
| * Again, looking purely at the task state would yield a memory FULL | |
| * pressure number of 0%, since *somebody* is always making forward | |
| * progress. But again this wouldn't capture the amount of execution | |
| * potential lost, which is 1 out of 4 CPUs, or 25%. | |
| * | |
| * To calculate wasted potential (pressure) with multiple processors, | |
| * we have to base our calculation on the number of non-idle tasks in | |
| * conjunction with the number of available CPUs, which is the number | |
| * of potential execution threads. SOME becomes then the proportion of | |
| * delayed tasks to possible threads, and FULL is the share of possible | |
| * threads that are unproductive due to delays: | |
| * | |
| * threads = min(nr_nonidle_tasks, nr_cpus) | |
| * SOME = min(nr_delayed_tasks / threads, 1) | |
| * FULL = (threads - min(nr_productive_tasks, threads)) / threads | |
| * | |
| * For the 257 number crunchers on 256 CPUs, this yields: | |
| * | |
| * threads = min(257, 256) | |
| * SOME = min(1 / 256, 1) = 0.4% | |
| * FULL = (256 - min(256, 256)) / 256 = 0% | |
| * | |
| * For the 1 out of 4 memory-delayed tasks, this yields: | |
| * | |
| * threads = min(4, 4) | |
| * SOME = min(1 / 4, 1) = 25% | |
| * FULL = (4 - min(3, 4)) / 4 = 25% | |
| * | |
| * [ Substitute nr_cpus with 1, and you can see that it's a natural | |
| * extension of the single-CPU model. ] | |
| * | |
| * Implementation | |
| * | |
| * To assess the precise time spent in each such state, we would have | |
| * to freeze the system on task changes and start/stop the state | |
| * clocks accordingly. Obviously that doesn't scale in practice. | |
| * | |
| * Because the scheduler aims to distribute the compute load evenly | |
| * among the available CPUs, we can track task state locally to each | |
| * CPU and, at much lower frequency, extrapolate the global state for | |
| * the cumulative stall times and the running averages. | |
| * | |
| * For each runqueue, we track: | |
| * | |
| * tSOME[cpu] = time(nr_delayed_tasks[cpu] != 0) | |
| * tFULL[cpu] = time(nr_delayed_tasks[cpu] && !nr_productive_tasks[cpu]) | |
| * tNONIDLE[cpu] = time(nr_nonidle_tasks[cpu] != 0) | |
| * | |
| * and then periodically aggregate: | |
| * | |
| * tNONIDLE = sum(tNONIDLE[i]) | |
| * | |
| * tSOME = sum(tSOME[i] * tNONIDLE[i]) / tNONIDLE | |
| * tFULL = sum(tFULL[i] * tNONIDLE[i]) / tNONIDLE | |
| * | |
| * %SOME = tSOME / period | |
| * %FULL = tFULL / period | |
| * | |
| * This gives us an approximation of pressure that is practical | |
| * cost-wise, yet way more sensitive and accurate than periodic | |
| * sampling of the aggregate task states would be. | |
| */ | |
| #include <linux/sched/clock.h> | |
| #include <linux/workqueue.h> | |
| #include <linux/psi.h> | |
| #include "sched.h" | |
| static int psi_bug __read_mostly; | |
| DEFINE_STATIC_KEY_FALSE(psi_disabled); | |
| static DEFINE_STATIC_KEY_TRUE(psi_cgroups_enabled); | |
| #ifdef CONFIG_PSI_DEFAULT_DISABLED | |
| static bool psi_enable; | |
| #else | |
| static bool psi_enable = true; | |
| #endif | |
| static int __init setup_psi(char *str) | |
| { | |
| return kstrtobool(str, &psi_enable) == 0; | |
| } | |
| __setup("psi=", setup_psi); | |
| /* Running averages - we need to be higher-res than loadavg */ | |
| #define PSI_FREQ (2*HZ+1) /* 2 sec intervals */ | |
| #define EXP_10s 1677 /* 1/exp(2s/10s) as fixed-point */ | |
| #define EXP_60s 1981 /* 1/exp(2s/60s) */ | |
| #define EXP_300s 2034 /* 1/exp(2s/300s) */ | |
| /* PSI trigger definitions */ | |
| #define WINDOW_MAX_US 10000000 /* Max window size is 10s */ | |
| #define UPDATES_PER_WINDOW 10 /* 10 updates per window */ | |
| /* Sampling frequency in nanoseconds */ | |
| static u64 psi_period __read_mostly; | |
| /* System-level pressure and stall tracking */ | |
| static DEFINE_PER_CPU(struct psi_group_cpu, system_group_pcpu); | |
| struct psi_group psi_system = { | |
| .pcpu = &system_group_pcpu, | |
| }; | |
| static DEFINE_PER_CPU(seqcount_t, psi_seq) = SEQCNT_ZERO(psi_seq); | |
| static inline void psi_write_begin(int cpu) | |
| { | |
| write_seqcount_begin(per_cpu_ptr(&psi_seq, cpu)); | |
| } | |
| static inline void psi_write_end(int cpu) | |
| { | |
| write_seqcount_end(per_cpu_ptr(&psi_seq, cpu)); | |
| } | |
| static inline u32 psi_read_begin(int cpu) | |
| { | |
| return read_seqcount_begin(per_cpu_ptr(&psi_seq, cpu)); | |
| } | |
| static inline bool psi_read_retry(int cpu, u32 seq) | |
| { | |
| return read_seqcount_retry(per_cpu_ptr(&psi_seq, cpu), seq); | |
| } | |
| static void psi_avgs_work(struct work_struct *work); | |
| static void poll_timer_fn(struct timer_list *t); | |
| static void group_init(struct psi_group *group) | |
| { | |
| group->enabled = true; | |
| group->avg_last_update = sched_clock(); | |
| group->avg_next_update = group->avg_last_update + psi_period; | |
| mutex_init(&group->avgs_lock); | |
| /* Init avg trigger-related members */ | |
| INIT_LIST_HEAD(&group->avg_triggers); | |
| memset(group->avg_nr_triggers, 0, sizeof(group->avg_nr_triggers)); | |
| INIT_DELAYED_WORK(&group->avgs_work, psi_avgs_work); | |
| /* Init rtpoll trigger-related members */ | |
| atomic_set(&group->rtpoll_scheduled, 0); | |
| mutex_init(&group->rtpoll_trigger_lock); | |
| INIT_LIST_HEAD(&group->rtpoll_triggers); | |
| group->rtpoll_min_period = U32_MAX; | |
| group->rtpoll_next_update = ULLONG_MAX; | |
| init_waitqueue_head(&group->rtpoll_wait); | |
| timer_setup(&group->rtpoll_timer, poll_timer_fn, 0); | |
| rcu_assign_pointer(group->rtpoll_task, NULL); | |
| } | |
| void __init psi_init(void) | |
| { | |
| if (!psi_enable) { | |
| static_branch_enable(&psi_disabled); | |
| static_branch_disable(&psi_cgroups_enabled); | |
| return; | |
| } | |
| if (!cgroup_psi_enabled()) | |
| static_branch_disable(&psi_cgroups_enabled); | |
| psi_period = jiffies_to_nsecs(PSI_FREQ); | |
| group_init(&psi_system); | |
| } | |
| static u32 test_states(unsigned int *tasks, u32 state_mask) | |
| { | |
| const bool oncpu = state_mask & PSI_ONCPU; | |
| if (tasks[NR_IOWAIT]) { | |
| state_mask |= BIT(PSI_IO_SOME); | |
| if (!tasks[NR_RUNNING]) | |
| state_mask |= BIT(PSI_IO_FULL); | |
| } | |
| if (tasks[NR_MEMSTALL]) { | |
| state_mask |= BIT(PSI_MEM_SOME); | |
| if (tasks[NR_RUNNING] == tasks[NR_MEMSTALL_RUNNING]) | |
| state_mask |= BIT(PSI_MEM_FULL); | |
| } | |
| if (tasks[NR_RUNNING] > oncpu) | |
| state_mask |= BIT(PSI_CPU_SOME); | |
| if (tasks[NR_RUNNING] && !oncpu) | |
| state_mask |= BIT(PSI_CPU_FULL); | |
| if (tasks[NR_IOWAIT] || tasks[NR_MEMSTALL] || tasks[NR_RUNNING]) | |
| state_mask |= BIT(PSI_NONIDLE); | |
| return state_mask; | |
| } | |
| static void get_recent_times(struct psi_group *group, int cpu, | |
| enum psi_aggregators aggregator, u32 *times, | |
| u32 *pchanged_states) | |
| { | |
| struct psi_group_cpu *groupc = per_cpu_ptr(group->pcpu, cpu); | |
| int current_cpu = raw_smp_processor_id(); | |
| unsigned int tasks[NR_PSI_TASK_COUNTS]; | |
| u64 now, state_start; | |
| enum psi_states s; | |
| unsigned int seq; | |
| u32 state_mask; | |
| *pchanged_states = 0; | |
| /* Snapshot a coherent view of the CPU state */ | |
| do { | |
| seq = psi_read_begin(cpu); | |
| now = cpu_clock(cpu); | |
| memcpy(times, groupc->times, sizeof(groupc->times)); | |
| state_mask = groupc->state_mask; | |
| state_start = groupc->state_start; | |
| if (cpu == current_cpu) | |
| memcpy(tasks, groupc->tasks, sizeof(groupc->tasks)); | |
| } while (psi_read_retry(cpu, seq)); | |
| /* Calculate state time deltas against the previous snapshot */ | |
| for (s = 0; s < NR_PSI_STATES; s++) { | |
| u32 delta; | |
| /* | |
| * In addition to already concluded states, we also | |
| * incorporate currently active states on the CPU, | |
| * since states may last for many sampling periods. | |
| * | |
| * This way we keep our delta sampling buckets small | |
| * (u32) and our reported pressure close to what's | |
| * actually happening. | |
| */ | |
| if (state_mask & (1 << s)) | |
| times[s] += now - state_start; | |
| delta = times[s] - groupc->times_prev[aggregator][s]; | |
| groupc->times_prev[aggregator][s] = times[s]; | |
| times[s] = delta; | |
| if (delta) | |
| *pchanged_states |= (1 << s); | |
| } | |
| /* | |
| * When collect_percpu_times() from the avgs_work, we don't want to | |
| * re-arm avgs_work when all CPUs are IDLE. But the current CPU running | |
| * this avgs_work is never IDLE, cause avgs_work can't be shut off. | |
| * So for the current CPU, we need to re-arm avgs_work only when | |
| * (NR_RUNNING > 1 || NR_IOWAIT > 0 || NR_MEMSTALL > 0), for other CPUs | |
| * we can just check PSI_NONIDLE delta. | |
| */ | |
| if (current_work() == &group->avgs_work.work) { | |
| bool reschedule; | |
| if (cpu == current_cpu) | |
| reschedule = tasks[NR_RUNNING] + | |
| tasks[NR_IOWAIT] + | |
| tasks[NR_MEMSTALL] > 1; | |
| else | |
| reschedule = *pchanged_states & (1 << PSI_NONIDLE); | |
| if (reschedule) | |
| *pchanged_states |= PSI_STATE_RESCHEDULE; | |
| } | |
| } | |
| static void calc_avgs(unsigned long avg[3], int missed_periods, | |
| u64 time, u64 period) | |
| { | |
| unsigned long pct; | |
| /* Fill in zeroes for periods of no activity */ | |
| if (missed_periods) { | |
| avg[0] = calc_load_n(avg[0], EXP_10s, 0, missed_periods); | |
| avg[1] = calc_load_n(avg[1], EXP_60s, 0, missed_periods); | |
| avg[2] = calc_load_n(avg[2], EXP_300s, 0, missed_periods); | |
| } | |
| /* Sample the most recent active period */ | |
| pct = div_u64(time * 100, period); | |
| pct *= FIXED_1; | |
| avg[0] = calc_load(avg[0], EXP_10s, pct); | |
| avg[1] = calc_load(avg[1], EXP_60s, pct); | |
| avg[2] = calc_load(avg[2], EXP_300s, pct); | |
| } | |
| static void collect_percpu_times(struct psi_group *group, | |
| enum psi_aggregators aggregator, | |
| u32 *pchanged_states) | |
| { | |
| u64 deltas[NR_PSI_STATES - 1] = { 0, }; | |
| unsigned long nonidle_total = 0; | |
| u32 changed_states = 0; | |
| int cpu; | |
| int s; | |
| /* | |
| * Collect the per-cpu time buckets and average them into a | |
| * single time sample that is normalized to wall clock time. | |
| * | |
| * For averaging, each CPU is weighted by its non-idle time in | |
| * the sampling period. This eliminates artifacts from uneven | |
| * loading, or even entirely idle CPUs. | |
| */ | |
| for_each_possible_cpu(cpu) { | |
| u32 times[NR_PSI_STATES]; | |
| u32 nonidle; | |
| u32 cpu_changed_states; | |
| get_recent_times(group, cpu, aggregator, times, | |
| &cpu_changed_states); | |
| changed_states |= cpu_changed_states; | |
| nonidle = nsecs_to_jiffies(times[PSI_NONIDLE]); | |
| nonidle_total += nonidle; | |
| for (s = 0; s < PSI_NONIDLE; s++) | |
| deltas[s] += (u64)times[s] * nonidle; | |
| } | |
| /* | |
| * Integrate the sample into the running statistics that are | |
| * reported to userspace: the cumulative stall times and the | |
| * decaying averages. | |
| * | |
| * Pressure percentages are sampled at PSI_FREQ. We might be | |
| * called more often when the user polls more frequently than | |
| * that; we might be called less often when there is no task | |
| * activity, thus no data, and clock ticks are sporadic. The | |
| * below handles both. | |
| */ | |
| /* total= */ | |
| for (s = 0; s < NR_PSI_STATES - 1; s++) | |
| group->total[aggregator][s] += | |
| div_u64(deltas[s], max(nonidle_total, 1UL)); | |
| if (pchanged_states) | |
| *pchanged_states = changed_states; | |
| } | |
| /* Trigger tracking window manipulations */ | |
| static void window_reset(struct psi_window *win, u64 now, u64 value, | |
| u64 prev_growth) | |
| { | |
| win->start_time = now; | |
| win->start_value = value; | |
| win->prev_growth = prev_growth; | |
| } | |
| /* | |
| * PSI growth tracking window update and growth calculation routine. | |
| * | |
| * This approximates a sliding tracking window by interpolating | |
| * partially elapsed windows using historical growth data from the | |
| * previous intervals. This minimizes memory requirements (by not storing | |
| * all the intermediate values in the previous window) and simplifies | |
| * the calculations. It works well because PSI signal changes only in | |
| * positive direction and over relatively small window sizes the growth | |
| * is close to linear. | |
| */ | |
| static u64 window_update(struct psi_window *win, u64 now, u64 value) | |
| { | |
| u64 elapsed; | |
| u64 growth; | |
| elapsed = now - win->start_time; | |
| growth = value - win->start_value; | |
| /* | |
| * After each tracking window passes win->start_value and | |
| * win->start_time get reset and win->prev_growth stores | |
| * the average per-window growth of the previous window. | |
| * win->prev_growth is then used to interpolate additional | |
| * growth from the previous window assuming it was linear. | |
| */ | |
| if (elapsed > win->size) | |
| window_reset(win, now, value, growth); | |
| else { | |
| u32 remaining; | |
| remaining = win->size - elapsed; | |
| growth += div64_u64(win->prev_growth * remaining, win->size); | |
| } | |
| return growth; | |
| } | |
| static void update_triggers(struct psi_group *group, u64 now, | |
| enum psi_aggregators aggregator) | |
| { | |
| struct psi_trigger *t; | |
| u64 *total = group->total[aggregator]; | |
| struct list_head *triggers; | |
| u64 *aggregator_total; | |
| if (aggregator == PSI_AVGS) { | |
| triggers = &group->avg_triggers; | |
| aggregator_total = group->avg_total; | |
| } else { | |
| triggers = &group->rtpoll_triggers; | |
| aggregator_total = group->rtpoll_total; | |
| } | |
| /* | |
| * On subsequent updates, calculate growth deltas and let | |
| * watchers know when their specified thresholds are exceeded. | |
| */ | |
| list_for_each_entry(t, triggers, node) { | |
| u64 growth; | |
| bool new_stall; | |
| new_stall = aggregator_total[t->state] != total[t->state]; | |
| /* Check for stall activity or a previous threshold breach */ | |
| if (!new_stall && !t->pending_event) | |
| continue; | |
| /* | |
| * Check for new stall activity, as well as deferred | |
| * events that occurred in the last window after the | |
| * trigger had already fired (we want to ratelimit | |
| * events without dropping any). | |
| */ | |
| if (new_stall) { | |
| /* Calculate growth since last update */ | |
| growth = window_update(&t->win, now, total[t->state]); | |
| if (!t->pending_event) { | |
| if (growth < t->threshold) | |
| continue; | |
| t->pending_event = true; | |
| } | |
| } | |
| /* Limit event signaling to once per window */ | |
| if (now < t->last_event_time + t->win.size) | |
| continue; | |
| /* Generate an event */ | |
| if (cmpxchg(&t->event, 0, 1) == 0) { | |
| if (t->of) | |
| kernfs_notify(t->of->kn); | |
| else | |
| wake_up_interruptible(&t->event_wait); | |
| } | |
| t->last_event_time = now; | |
| /* Reset threshold breach flag once event got generated */ | |
| t->pending_event = false; | |
| } | |
| } | |
| static u64 update_averages(struct psi_group *group, u64 now) | |
| { | |
| unsigned long missed_periods = 0; | |
| u64 expires, period; | |
| u64 avg_next_update; | |
| int s; | |
| /* avgX= */ | |
| expires = group->avg_next_update; | |
| if (now - expires >= psi_period) | |
| missed_periods = div_u64(now - expires, psi_period); | |
| /* | |
| * The periodic clock tick can get delayed for various | |
| * reasons, especially on loaded systems. To avoid clock | |
| * drift, we schedule the clock in fixed psi_period intervals. | |
| * But the deltas we sample out of the per-cpu buckets above | |
| * are based on the actual time elapsing between clock ticks. | |
| */ | |
| avg_next_update = expires + ((1 + missed_periods) * psi_period); | |
| period = now - (group->avg_last_update + (missed_periods * psi_period)); | |
| group->avg_last_update = now; | |
| for (s = 0; s < NR_PSI_STATES - 1; s++) { | |
| u32 sample; | |
| sample = group->total[PSI_AVGS][s] - group->avg_total[s]; | |
| /* | |
| * Due to the lockless sampling of the time buckets, | |
| * recorded time deltas can slip into the next period, | |
| * which under full pressure can result in samples in | |
| * excess of the period length. | |
| * | |
| * We don't want to report non-sensical pressures in | |
| * excess of 100%, nor do we want to drop such events | |
| * on the floor. Instead we punt any overage into the | |
| * future until pressure subsides. By doing this we | |
| * don't underreport the occurring pressure curve, we | |
| * just report it delayed by one period length. | |
| * | |
| * The error isn't cumulative. As soon as another | |
| * delta slips from a period P to P+1, by definition | |
| * it frees up its time T in P. | |
| */ | |
| if (sample > period) | |
| sample = period; | |
| group->avg_total[s] += sample; | |
| calc_avgs(group->avg[s], missed_periods, sample, period); | |
| } | |
| return avg_next_update; | |
| } | |
| static void psi_avgs_work(struct work_struct *work) | |
| { | |
| struct delayed_work *dwork; | |
| struct psi_group *group; | |
| u32 changed_states; | |
| u64 now; | |
| dwork = to_delayed_work(work); | |
| group = container_of(dwork, struct psi_group, avgs_work); | |
| mutex_lock(&group->avgs_lock); | |
| now = sched_clock(); | |
| collect_percpu_times(group, PSI_AVGS, &changed_states); | |
| /* | |
| * If there is task activity, periodically fold the per-cpu | |
| * times and feed samples into the running averages. If things | |
| * are idle and there is no data to process, stop the clock. | |
| * Once restarted, we'll catch up the running averages in one | |
| * go - see calc_avgs() and missed_periods. | |
| */ | |
| if (now >= group->avg_next_update) { | |
| update_triggers(group, now, PSI_AVGS); | |
| group->avg_next_update = update_averages(group, now); | |
| } | |
| if (changed_states & PSI_STATE_RESCHEDULE) { | |
| schedule_delayed_work(dwork, nsecs_to_jiffies( | |
| group->avg_next_update - now) + 1); | |
| } | |
| mutex_unlock(&group->avgs_lock); | |
| } | |
| static void init_rtpoll_triggers(struct psi_group *group, u64 now) | |
| { | |
| struct psi_trigger *t; | |
| list_for_each_entry(t, &group->rtpoll_triggers, node) | |
| window_reset(&t->win, now, | |
| group->total[PSI_POLL][t->state], 0); | |
| memcpy(group->rtpoll_total, group->total[PSI_POLL], | |
| sizeof(group->rtpoll_total)); | |
| group->rtpoll_next_update = now + group->rtpoll_min_period; | |
| } | |
| /* Schedule rtpolling if it's not already scheduled or forced. */ | |
| static void psi_schedule_rtpoll_work(struct psi_group *group, unsigned long delay, | |
| bool force) | |
| { | |
| struct task_struct *task; | |
| /* | |
| * atomic_xchg should be called even when !force to provide a | |
| * full memory barrier (see the comment inside psi_rtpoll_work). | |
| */ | |
| if (atomic_xchg(&group->rtpoll_scheduled, 1) && !force) | |
| return; | |
| rcu_read_lock(); | |
| task = rcu_dereference(group->rtpoll_task); | |
| /* | |
| * kworker might be NULL in case psi_trigger_destroy races with | |
| * psi_task_change (hotpath) which can't use locks | |
| */ | |
| if (likely(task)) | |
| mod_timer(&group->rtpoll_timer, jiffies + delay); | |
| else | |
| atomic_set(&group->rtpoll_scheduled, 0); | |
| rcu_read_unlock(); | |
| } | |
| static void psi_rtpoll_work(struct psi_group *group) | |
| { | |
| bool force_reschedule = false; | |
| u32 changed_states; | |
| u64 now; | |
| mutex_lock(&group->rtpoll_trigger_lock); | |
| now = sched_clock(); | |
| if (now > group->rtpoll_until) { | |
| /* | |
| * We are either about to start or might stop rtpolling if no | |
| * state change was recorded. Resetting rtpoll_scheduled leaves | |
| * a small window for psi_group_change to sneak in and schedule | |
| * an immediate rtpoll_work before we get to rescheduling. One | |
| * potential extra wakeup at the end of the rtpolling window | |
| * should be negligible and rtpoll_next_update still keeps | |
| * updates correctly on schedule. | |
| */ | |
| atomic_set(&group->rtpoll_scheduled, 0); | |
| /* | |
| * A task change can race with the rtpoll worker that is supposed to | |
| * report on it. To avoid missing events, ensure ordering between | |
| * rtpoll_scheduled and the task state accesses, such that if the | |
| * rtpoll worker misses the state update, the task change is | |
| * guaranteed to reschedule the rtpoll worker: | |
| * | |
| * rtpoll worker: | |
| * atomic_set(rtpoll_scheduled, 0) | |
| * smp_mb() | |
| * LOAD states | |
| * | |
| * task change: | |
| * STORE states | |
| * if atomic_xchg(rtpoll_scheduled, 1) == 0: | |
| * schedule rtpoll worker | |
| * | |
| * The atomic_xchg() implies a full barrier. | |
| */ | |
| smp_mb(); | |
| } else { | |
| /* The rtpolling window is not over, keep rescheduling */ | |
| force_reschedule = true; | |
| } | |
| collect_percpu_times(group, PSI_POLL, &changed_states); | |
| if (changed_states & group->rtpoll_states) { | |
| /* Initialize trigger windows when entering rtpolling mode */ | |
| if (now > group->rtpoll_until) | |
| init_rtpoll_triggers(group, now); | |
| /* | |
| * Keep the monitor active for at least the duration of the | |
| * minimum tracking window as long as monitor states are | |
| * changing. | |
| */ | |
| group->rtpoll_until = now + | |
| group->rtpoll_min_period * UPDATES_PER_WINDOW; | |
| } | |
| if (now > group->rtpoll_until) { | |
| group->rtpoll_next_update = ULLONG_MAX; | |
| goto out; | |
| } | |
| if (now >= group->rtpoll_next_update) { | |
| if (changed_states & group->rtpoll_states) { | |
| update_triggers(group, now, PSI_POLL); | |
| memcpy(group->rtpoll_total, group->total[PSI_POLL], | |
| sizeof(group->rtpoll_total)); | |
| } | |
| group->rtpoll_next_update = now + group->rtpoll_min_period; | |
| } | |
| psi_schedule_rtpoll_work(group, | |
| nsecs_to_jiffies(group->rtpoll_next_update - now) + 1, | |
| force_reschedule); | |
| out: | |
| mutex_unlock(&group->rtpoll_trigger_lock); | |
| } | |
| static int psi_rtpoll_worker(void *data) | |
| { | |
| struct psi_group *group = (struct psi_group *)data; | |
| sched_set_fifo_low(current); | |
| while (true) { | |
| wait_event_interruptible(group->rtpoll_wait, | |
| atomic_cmpxchg(&group->rtpoll_wakeup, 1, 0) || | |
| kthread_should_stop()); | |
| if (kthread_should_stop()) | |
| break; | |
| psi_rtpoll_work(group); | |
| } | |
| return 0; | |
| } | |
| static void poll_timer_fn(struct timer_list *t) | |
| { | |
| struct psi_group *group = timer_container_of(group, t, rtpoll_timer); | |
| atomic_set(&group->rtpoll_wakeup, 1); | |
| wake_up_interruptible(&group->rtpoll_wait); | |
| } | |
| static void record_times(struct psi_group_cpu *groupc, u64 now) | |
| { | |
| u32 delta; | |
| delta = now - groupc->state_start; | |
| groupc->state_start = now; | |
| if (groupc->state_mask & (1 << PSI_IO_SOME)) { | |
| groupc->times[PSI_IO_SOME] += delta; | |
| if (groupc->state_mask & (1 << PSI_IO_FULL)) | |
| groupc->times[PSI_IO_FULL] += delta; | |
| } | |
| if (groupc->state_mask & (1 << PSI_MEM_SOME)) { | |
| groupc->times[PSI_MEM_SOME] += delta; | |
| if (groupc->state_mask & (1 << PSI_MEM_FULL)) | |
| groupc->times[PSI_MEM_FULL] += delta; | |
| } | |
| if (groupc->state_mask & (1 << PSI_CPU_SOME)) { | |
| groupc->times[PSI_CPU_SOME] += delta; | |
| if (groupc->state_mask & (1 << PSI_CPU_FULL)) | |
| groupc->times[PSI_CPU_FULL] += delta; | |
| } | |
| if (groupc->state_mask & (1 << PSI_NONIDLE)) | |
| groupc->times[PSI_NONIDLE] += delta; | |
| } | |
| #define for_each_group(iter, group) \ | |
| for (typeof(group) iter = group; iter; iter = iter->parent) | |
| static void psi_group_change(struct psi_group *group, int cpu, | |
| unsigned int clear, unsigned int set, | |
| u64 now, bool wake_clock) | |
| { | |
| struct psi_group_cpu *groupc; | |
| unsigned int t, m; | |
| u32 state_mask; | |
| lockdep_assert_rq_held(cpu_rq(cpu)); | |
| groupc = per_cpu_ptr(group->pcpu, cpu); | |
| /* | |
| * Start with TSK_ONCPU, which doesn't have a corresponding | |
| * task count - it's just a boolean flag directly encoded in | |
| * the state mask. Clear, set, or carry the current state if | |
| * no changes are requested. | |
| */ | |
| if (unlikely(clear & TSK_ONCPU)) { | |
| state_mask = 0; | |
| clear &= ~TSK_ONCPU; | |
| } else if (unlikely(set & TSK_ONCPU)) { | |
| state_mask = PSI_ONCPU; | |
| set &= ~TSK_ONCPU; | |
| } else { | |
| state_mask = groupc->state_mask & PSI_ONCPU; | |
| } | |
| /* | |
| * The rest of the state mask is calculated based on the task | |
| * counts. Update those first, then construct the mask. | |
| */ | |
| for (t = 0, m = clear; m; m &= ~(1 << t), t++) { | |
| if (!(m & (1 << t))) | |
| continue; | |
| if (groupc->tasks[t]) { | |
| groupc->tasks[t]--; | |
| } else if (!psi_bug) { | |
| printk_deferred(KERN_ERR "psi: task underflow! cpu=%d t=%d tasks=[%u %u %u %u] clear=%x set=%x\n", | |
| cpu, t, groupc->tasks[0], | |
| groupc->tasks[1], groupc->tasks[2], | |
| groupc->tasks[3], clear, set); | |
| psi_bug = 1; | |
| } | |
| } | |
| for (t = 0; set; set &= ~(1 << t), t++) | |
| if (set & (1 << t)) | |
| groupc->tasks[t]++; | |
| if (!group->enabled) { | |
| /* | |
| * On the first group change after disabling PSI, conclude | |
| * the current state and flush its time. This is unlikely | |
| * to matter to the user, but aggregation (get_recent_times) | |
| * may have already incorporated the live state into times_prev; | |
| * avoid a delta sample underflow when PSI is later re-enabled. | |
| */ | |
| if (unlikely(groupc->state_mask & (1 << PSI_NONIDLE))) | |
| record_times(groupc, now); | |
| groupc->state_mask = state_mask; | |
| return; | |
| } | |
| state_mask = test_states(groupc->tasks, state_mask); | |
| /* | |
| * Since we care about lost potential, a memstall is FULL | |
| * when there are no other working tasks, but also when | |
| * the CPU is actively reclaiming and nothing productive | |
| * could run even if it were runnable. So when the current | |
| * task in a cgroup is in_memstall, the corresponding groupc | |
| * on that cpu is in PSI_MEM_FULL state. | |
| */ | |
| if (unlikely((state_mask & PSI_ONCPU) && cpu_curr(cpu)->in_memstall)) | |
| state_mask |= (1 << PSI_MEM_FULL); | |
| record_times(groupc, now); | |
| groupc->state_mask = state_mask; | |
| if (state_mask & group->rtpoll_states) | |
| psi_schedule_rtpoll_work(group, 1, false); | |
| if (wake_clock && !delayed_work_pending(&group->avgs_work)) | |
| schedule_delayed_work(&group->avgs_work, PSI_FREQ); | |
| } | |
| static inline struct psi_group *task_psi_group(struct task_struct *task) | |
| { | |
| #ifdef CONFIG_CGROUPS | |
| if (static_branch_likely(&psi_cgroups_enabled)) | |
| return cgroup_psi(task_dfl_cgroup(task)); | |
| #endif | |
| return &psi_system; | |
| } | |
| static void psi_flags_change(struct task_struct *task, int clear, int set) | |
| { | |
| if (((task->psi_flags & set) || | |
| (task->psi_flags & clear) != clear) && | |
| !psi_bug) { | |
| printk_deferred(KERN_ERR "psi: inconsistent task state! task=%d:%s cpu=%d psi_flags=%x clear=%x set=%x\n", | |
| task->pid, task->comm, task_cpu(task), | |
| task->psi_flags, clear, set); | |
| psi_bug = 1; | |
| } | |
| task->psi_flags &= ~clear; | |
| task->psi_flags |= set; | |
| } | |
| void psi_task_change(struct task_struct *task, int clear, int set) | |
| { | |
| int cpu = task_cpu(task); | |
| u64 now; | |
| if (!task->pid) | |
| return; | |
| psi_flags_change(task, clear, set); | |
| psi_write_begin(cpu); | |
| now = cpu_clock(cpu); | |
| for_each_group(group, task_psi_group(task)) | |
| psi_group_change(group, cpu, clear, set, now, true); | |
| psi_write_end(cpu); | |
| } | |
| void psi_task_switch(struct task_struct *prev, struct task_struct *next, | |
| bool sleep) | |
| { | |
| struct psi_group *common = NULL; | |
| int cpu = task_cpu(prev); | |
| u64 now; | |
| psi_write_begin(cpu); | |
| now = cpu_clock(cpu); | |
| if (next->pid) { | |
| psi_flags_change(next, 0, TSK_ONCPU); | |
| /* | |
| * Set TSK_ONCPU on @next's cgroups. If @next shares any | |
| * ancestors with @prev, those will already have @prev's | |
| * TSK_ONCPU bit set, and we can stop the iteration there. | |
| */ | |
| for_each_group(group, task_psi_group(next)) { | |
| struct psi_group_cpu *groupc = per_cpu_ptr(group->pcpu, cpu); | |
| if (groupc->state_mask & PSI_ONCPU) { | |
| common = group; | |
| break; | |
| } | |
| psi_group_change(group, cpu, 0, TSK_ONCPU, now, true); | |
| } | |
| } | |
| if (prev->pid) { | |
| int clear = TSK_ONCPU, set = 0; | |
| bool wake_clock = true; | |
| /* | |
| * When we're going to sleep, psi_dequeue() lets us | |
| * handle TSK_RUNNING, TSK_MEMSTALL_RUNNING and | |
| * TSK_IOWAIT here, where we can combine it with | |
| * TSK_ONCPU and save walking common ancestors twice. | |
| */ | |
| if (sleep) { | |
| clear |= TSK_RUNNING; | |
| if (prev->in_memstall) | |
| clear |= TSK_MEMSTALL_RUNNING; | |
| if (prev->in_iowait) | |
| set |= TSK_IOWAIT; | |
| /* | |
| * Periodic aggregation shuts off if there is a period of no | |
| * task changes, so we wake it back up if necessary. However, | |
| * don't do this if the task change is the aggregation worker | |
| * itself going to sleep, or we'll ping-pong forever. | |
| */ | |
| if (unlikely((prev->flags & PF_WQ_WORKER) && | |
| wq_worker_last_func(prev) == psi_avgs_work)) | |
| wake_clock = false; | |
| } | |
| psi_flags_change(prev, clear, set); | |
| for_each_group(group, task_psi_group(prev)) { | |
| if (group == common) | |
| break; | |
| psi_group_change(group, cpu, clear, set, now, wake_clock); | |
| } | |
| /* | |
| * TSK_ONCPU is handled up to the common ancestor. If there are | |
| * any other differences between the two tasks (e.g. prev goes | |
| * to sleep, or only one task is memstall), finish propagating | |
| * those differences all the way up to the root. | |
| */ | |
| if ((prev->psi_flags ^ next->psi_flags) & ~TSK_ONCPU) { | |
| clear &= ~TSK_ONCPU; | |
| for_each_group(group, common) | |
| psi_group_change(group, cpu, clear, set, now, wake_clock); | |
| } | |
| } | |
| psi_write_end(cpu); | |
| } | |
| #ifdef CONFIG_IRQ_TIME_ACCOUNTING | |
| void psi_account_irqtime(struct rq *rq, struct task_struct *curr, struct task_struct *prev) | |
| { | |
| int cpu = task_cpu(curr); | |
| struct psi_group_cpu *groupc; | |
| s64 delta; | |
| u64 irq; | |
| u64 now; | |
| if (static_branch_likely(&psi_disabled) || !irqtime_enabled()) | |
| return; | |
| if (!curr->pid) | |
| return; | |
| lockdep_assert_rq_held(rq); | |
| if (prev && task_psi_group(prev) == task_psi_group(curr)) | |
| return; | |
| irq = irq_time_read(cpu); | |
| delta = (s64)(irq - rq->psi_irq_time); | |
| if (delta <= 0) | |
| return; | |
| rq->psi_irq_time = irq; | |
| psi_write_begin(cpu); | |
| now = cpu_clock(cpu); | |
| for_each_group(group, task_psi_group(curr)) { | |
| if (!group->enabled) | |
| continue; | |
| groupc = per_cpu_ptr(group->pcpu, cpu); | |
| record_times(groupc, now); | |
| groupc->times[PSI_IRQ_FULL] += delta; | |
| if (group->rtpoll_states & (1 << PSI_IRQ_FULL)) | |
| psi_schedule_rtpoll_work(group, 1, false); | |
| } | |
| psi_write_end(cpu); | |
| } | |
| #endif /* CONFIG_IRQ_TIME_ACCOUNTING */ | |
| /** | |
| * psi_memstall_enter - mark the beginning of a memory stall section | |
| * @flags: flags to handle nested sections | |
| * | |
| * Marks the calling task as being stalled due to a lack of memory, | |
| * such as waiting for a refault or performing reclaim. | |
| */ | |
| void psi_memstall_enter(unsigned long *flags) | |
| { | |
| struct rq_flags rf; | |
| struct rq *rq; | |
| if (static_branch_likely(&psi_disabled)) | |
| return; | |
| *flags = current->in_memstall; | |
| if (*flags) | |
| return; | |
| /* | |
| * in_memstall setting & accounting needs to be atomic wrt | |
| * changes to the task's scheduling state, otherwise we can | |
| * race with CPU migration. | |
| */ | |
| rq = this_rq_lock_irq(&rf); | |
| current->in_memstall = 1; | |
| psi_task_change(current, 0, TSK_MEMSTALL | TSK_MEMSTALL_RUNNING); | |
| rq_unlock_irq(rq, &rf); | |
| } | |
| EXPORT_SYMBOL_GPL(psi_memstall_enter); | |
| /** | |
| * psi_memstall_leave - mark the end of an memory stall section | |
| * @flags: flags to handle nested memdelay sections | |
| * | |
| * Marks the calling task as no longer stalled due to lack of memory. | |
| */ | |
| void psi_memstall_leave(unsigned long *flags) | |
| { | |
| struct rq_flags rf; | |
| struct rq *rq; | |
| if (static_branch_likely(&psi_disabled)) | |
| return; | |
| if (*flags) | |
| return; | |
| /* | |
| * in_memstall clearing & accounting needs to be atomic wrt | |
| * changes to the task's scheduling state, otherwise we could | |
| * race with CPU migration. | |
| */ | |
| rq = this_rq_lock_irq(&rf); | |
| current->in_memstall = 0; | |
| psi_task_change(current, TSK_MEMSTALL | TSK_MEMSTALL_RUNNING, 0); | |
| rq_unlock_irq(rq, &rf); | |
| } | |
| EXPORT_SYMBOL_GPL(psi_memstall_leave); | |
| #ifdef CONFIG_CGROUPS | |
| int psi_cgroup_alloc(struct cgroup *cgroup) | |
| { | |
| if (!static_branch_likely(&psi_cgroups_enabled)) | |
| return 0; | |
| cgroup->psi = kzalloc_obj(struct psi_group); | |
| if (!cgroup->psi) | |
| return -ENOMEM; | |
| cgroup->psi->pcpu = alloc_percpu(struct psi_group_cpu); | |
| if (!cgroup->psi->pcpu) { | |
| kfree(cgroup->psi); | |
| return -ENOMEM; | |
| } | |
| group_init(cgroup->psi); | |
| cgroup->psi->parent = cgroup_psi(cgroup_parent(cgroup)); | |
| return 0; | |
| } | |
| void psi_cgroup_free(struct cgroup *cgroup) | |
| { | |
| if (!static_branch_likely(&psi_cgroups_enabled)) | |
| return; | |
| cancel_delayed_work_sync(&cgroup->psi->avgs_work); | |
| /* | |
| * A psi_schedule_rtpoll_work() call racing the last trigger's | |
| * destruction may have re-armed the timer after psi_trigger_destroy() | |
| * deleted it. Spurious firing while the group is alive is harmless. | |
| */ | |
| timer_shutdown_sync(&cgroup->psi->rtpoll_timer); | |
| free_percpu(cgroup->psi->pcpu); | |
| /* All triggers must be removed by now */ | |
| WARN_ONCE(cgroup->psi->rtpoll_states, "psi: trigger leak\n"); | |
| kfree(cgroup->psi); | |
| } | |
| /** | |
| * cgroup_move_task - move task to a different cgroup | |
| * @task: the task | |
| * @to: the target css_set | |
| * | |
| * Move task to a new cgroup and safely migrate its associated stall | |
| * state between the different groups. | |
| * | |
| * This function acquires the task's rq lock to lock out concurrent | |
| * changes to the task's scheduling state and - in case the task is | |
| * running - concurrent changes to its stall state. | |
| */ | |
| void cgroup_move_task(struct task_struct *task, struct css_set *to) | |
| { | |
| unsigned int task_flags; | |
| struct rq_flags rf; | |
| struct rq *rq; | |
| if (!static_branch_likely(&psi_cgroups_enabled)) { | |
| /* | |
| * Lame to do this here, but the scheduler cannot be locked | |
| * from the outside, so we move cgroups from inside sched/. | |
| */ | |
| rcu_assign_pointer(task->cgroups, to); | |
| return; | |
| } | |
| rq = task_rq_lock(task, &rf); | |
| /* | |
| * We may race with schedule() dropping the rq lock between | |
| * deactivating prev and switching to next. Because the psi | |
| * updates from the deactivation are deferred to the switch | |
| * callback to save cgroup tree updates, the task's scheduling | |
| * state here is not coherent with its psi state: | |
| * | |
| * schedule() cgroup_move_task() | |
| * rq_lock() | |
| * deactivate_task() | |
| * p->on_rq = 0 | |
| * psi_dequeue() // defers TSK_RUNNING & TSK_IOWAIT updates | |
| * pick_next_task() | |
| * rq_unlock() | |
| * rq_lock() | |
| * psi_task_change() // old cgroup | |
| * task->cgroups = to | |
| * psi_task_change() // new cgroup | |
| * rq_unlock() | |
| * rq_lock() | |
| * psi_sched_switch() // does deferred updates in new cgroup | |
| * | |
| * Don't rely on the scheduling state. Use psi_flags instead. | |
| */ | |
| task_flags = task->psi_flags; | |
| if (task_flags) | |
| psi_task_change(task, task_flags, 0); | |
| /* See comment above */ | |
| rcu_assign_pointer(task->cgroups, to); | |
| if (task_flags) | |
| psi_task_change(task, 0, task_flags); | |
| task_rq_unlock(rq, task, &rf); | |
| } | |
| void psi_cgroup_restart(struct psi_group *group) | |
| { | |
| int cpu; | |
| /* | |
| * After we disable psi_group->enabled, we don't actually | |
| * stop percpu tasks accounting in each psi_group_cpu, | |
| * instead only stop test_states() loop, record_times() | |
| * and averaging worker, see psi_group_change() for details. | |
| * | |
| * When disable cgroup PSI, this function has nothing to sync | |
| * since cgroup pressure files are hidden and percpu psi_group_cpu | |
| * would see !psi_group->enabled and only do task accounting. | |
| * | |
| * When re-enable cgroup PSI, this function use psi_group_change() | |
| * to get correct state mask from test_states() loop on tasks[], | |
| * and restart groupc->state_start from now, use .clear = .set = 0 | |
| * here since no task status really changed. | |
| */ | |
| if (!group->enabled) | |
| return; | |
| for_each_possible_cpu(cpu) { | |
| u64 now; | |
| guard(rq_lock_irq)(cpu_rq(cpu)); | |
| psi_write_begin(cpu); | |
| now = cpu_clock(cpu); | |
| psi_group_change(group, cpu, 0, 0, now, true); | |
| psi_write_end(cpu); | |
| } | |
| } | |
| #endif /* CONFIG_CGROUPS */ | |
| int psi_show(struct seq_file *m, struct psi_group *group, enum psi_res res) | |
| { | |
| bool only_full = false; | |
| int full; | |
| u64 now; | |
| if (static_branch_likely(&psi_disabled)) | |
| return -EOPNOTSUPP; | |
| #ifdef CONFIG_IRQ_TIME_ACCOUNTING | |
| if (!irqtime_enabled() && res == PSI_IRQ) | |
| return -EOPNOTSUPP; | |
| #endif | |
| /* Update averages before reporting them */ | |
| mutex_lock(&group->avgs_lock); | |
| now = sched_clock(); | |
| collect_percpu_times(group, PSI_AVGS, NULL); | |
| if (now >= group->avg_next_update) | |
| group->avg_next_update = update_averages(group, now); | |
| mutex_unlock(&group->avgs_lock); | |
| #ifdef CONFIG_IRQ_TIME_ACCOUNTING | |
| only_full = res == PSI_IRQ; | |
| #endif | |
| for (full = 0; full < 2 - only_full; full++) { | |
| unsigned long avg[3] = { 0, }; | |
| u64 total = 0; | |
| int w; | |
| /* CPU FULL is undefined at the system level */ | |
| if (!(group == &psi_system && res == PSI_CPU && full)) { | |
| for (w = 0; w < 3; w++) | |
| avg[w] = group->avg[res * 2 + full][w]; | |
| total = div_u64(group->total[PSI_AVGS][res * 2 + full], | |
| NSEC_PER_USEC); | |
| } | |
| seq_printf(m, "%s avg10=%lu.%02lu avg60=%lu.%02lu avg300=%lu.%02lu total=%llu\n", | |
| full || only_full ? "full" : "some", | |
| LOAD_INT(avg[0]), LOAD_FRAC(avg[0]), | |
| LOAD_INT(avg[1]), LOAD_FRAC(avg[1]), | |
| LOAD_INT(avg[2]), LOAD_FRAC(avg[2]), | |
| total); | |
| } | |
| return 0; | |
| } | |
| /* | |
| * Create @group's rtpoll worker after psi_trigger_create() reported the need | |
| * for one. kthread creation depends on the whole fork path and we don't want | |
| * all of that nested inside cgroup_mutex, so the caller must drop it and any | |
| * other lock that forks can wait behind. If two callers race, the loser stops | |
| * its never-woken kthread. | |
| */ | |
| int psi_trigger_create_rtpoll_worker(struct psi_group *group) | |
| { | |
| struct task_struct *task; | |
| task = kthread_create(psi_rtpoll_worker, group, "psimon"); | |
| if (IS_ERR(task)) | |
| return PTR_ERR(task); | |
| scoped_guard(mutex, &group->rtpoll_trigger_lock) { | |
| if (!rcu_access_pointer(group->rtpoll_task)) { | |
| atomic_set(&group->rtpoll_wakeup, 0); | |
| wake_up_process(task); | |
| rcu_assign_pointer(group->rtpoll_task, task); | |
| /* | |
| * Poll once to catch up on scheduling attempts dropped | |
| * while there was no rtpoll worker. | |
| */ | |
| psi_schedule_rtpoll_work(group, 1, true); | |
| return 0; | |
| } | |
| } | |
| kthread_stop(task); | |
| return 0; | |
| } | |
| struct psi_trigger *psi_trigger_create(struct psi_group *group, char *buf, | |
| enum psi_res res, struct file *file, | |
| struct kernfs_open_file *of, | |
| bool *need_rtpoll_worker) | |
| { | |
| struct psi_trigger *t; | |
| enum psi_states state; | |
| u32 threshold_us; | |
| bool privileged; | |
| u32 window_us; | |
| *need_rtpoll_worker = false; | |
| if (static_branch_likely(&psi_disabled)) | |
| return ERR_PTR(-EOPNOTSUPP); | |
| /* | |
| * Checking the privilege here on file->f_cred implies that a privileged user | |
| * could open the file and delegate the write to an unprivileged one. | |
| */ | |
| privileged = cap_raised(file->f_cred->cap_effective, CAP_SYS_RESOURCE); | |
| if (sscanf(buf, "some %u %u", &threshold_us, &window_us) == 2) | |
| state = PSI_IO_SOME + res * 2; | |
| else if (sscanf(buf, "full %u %u", &threshold_us, &window_us) == 2) | |
| state = PSI_IO_FULL + res * 2; | |
| else | |
| return ERR_PTR(-EINVAL); | |
| #ifdef CONFIG_IRQ_TIME_ACCOUNTING | |
| if (res == PSI_IRQ && --state != PSI_IRQ_FULL) | |
| return ERR_PTR(-EINVAL); | |
| #endif | |
| if (state >= PSI_NONIDLE) | |
| return ERR_PTR(-EINVAL); | |
| if (window_us == 0 || window_us > WINDOW_MAX_US) | |
| return ERR_PTR(-EINVAL); | |
| /* | |
| * Unprivileged users can only use 2s windows so that averages aggregation | |
| * work is used, and no RT threads need to be spawned. | |
| */ | |
| if (!privileged && window_us % 2000000) | |
| return ERR_PTR(-EINVAL); | |
| /* Check threshold */ | |
| if (threshold_us == 0 || threshold_us > window_us) | |
| return ERR_PTR(-EINVAL); | |
| t = kmalloc_obj(*t); | |
| if (!t) | |
| return ERR_PTR(-ENOMEM); | |
| t->group = group; | |
| t->state = state; | |
| t->threshold = threshold_us * NSEC_PER_USEC; | |
| t->win.size = window_us * NSEC_PER_USEC; | |
| window_reset(&t->win, sched_clock(), | |
| group->total[PSI_POLL][t->state], 0); | |
| t->event = 0; | |
| t->last_event_time = 0; | |
| t->of = of; | |
| if (!of) | |
| init_waitqueue_head(&t->event_wait); | |
| t->pending_event = false; | |
| t->aggregator = privileged ? PSI_POLL : PSI_AVGS; | |
| if (privileged) { | |
| mutex_lock(&group->rtpoll_trigger_lock); | |
| list_add(&t->node, &group->rtpoll_triggers); | |
| group->rtpoll_min_period = min(group->rtpoll_min_period, | |
| div_u64(t->win.size, UPDATES_PER_WINDOW)); | |
| group->rtpoll_nr_triggers[t->state]++; | |
| group->rtpoll_states |= (1 << t->state); | |
| *need_rtpoll_worker = !rcu_access_pointer(group->rtpoll_task); | |
| mutex_unlock(&group->rtpoll_trigger_lock); | |
| } else { | |
| mutex_lock(&group->avgs_lock); | |
| list_add(&t->node, &group->avg_triggers); | |
| group->avg_nr_triggers[t->state]++; | |
| mutex_unlock(&group->avgs_lock); | |
| } | |
| return t; | |
| } | |
| void psi_trigger_destroy(struct psi_trigger *t) | |
| { | |
| struct psi_group *group; | |
| struct task_struct *task_to_destroy = NULL; | |
| /* | |
| * We do not check psi_disabled since it might have been disabled after | |
| * the trigger got created. | |
| */ | |
| if (!t) | |
| return; | |
| group = t->group; | |
| /* | |
| * Wakeup waiters to stop polling and clear the queue to prevent it from | |
| * being accessed later. Can happen if cgroup is deleted from under a | |
| * polling process. | |
| */ | |
| if (t->of) | |
| kernfs_notify(t->of->kn); | |
| else | |
| wake_up_interruptible(&t->event_wait); | |
| if (t->aggregator == PSI_AVGS) { | |
| mutex_lock(&group->avgs_lock); | |
| if (!list_empty(&t->node)) { | |
| list_del(&t->node); | |
| group->avg_nr_triggers[t->state]--; | |
| } | |
| mutex_unlock(&group->avgs_lock); | |
| } else { | |
| mutex_lock(&group->rtpoll_trigger_lock); | |
| if (!list_empty(&t->node)) { | |
| struct psi_trigger *tmp; | |
| u64 period = ULLONG_MAX; | |
| list_del(&t->node); | |
| group->rtpoll_nr_triggers[t->state]--; | |
| if (!group->rtpoll_nr_triggers[t->state]) | |
| group->rtpoll_states &= ~(1 << t->state); | |
| /* | |
| * Reset min update period for the remaining triggers | |
| * iff the destroying trigger had the min window size. | |
| */ | |
| if (group->rtpoll_min_period == div_u64(t->win.size, UPDATES_PER_WINDOW)) { | |
| list_for_each_entry(tmp, &group->rtpoll_triggers, node) | |
| period = min(period, div_u64(tmp->win.size, | |
| UPDATES_PER_WINDOW)); | |
| group->rtpoll_min_period = period; | |
| } | |
| /* Destroy rtpoll_task when the last trigger is destroyed */ | |
| if (group->rtpoll_states == 0) { | |
| group->rtpoll_until = 0; | |
| task_to_destroy = rcu_dereference_protected( | |
| group->rtpoll_task, | |
| lockdep_is_held(&group->rtpoll_trigger_lock)); | |
| rcu_assign_pointer(group->rtpoll_task, NULL); | |
| timer_delete(&group->rtpoll_timer); | |
| } | |
| } | |
| mutex_unlock(&group->rtpoll_trigger_lock); | |
| } | |
| /* | |
| * Wait for psi_schedule_rtpoll_work RCU to complete its read-side | |
| * critical section before destroying the trigger and optionally the | |
| * rtpoll_task. | |
| */ | |
| synchronize_rcu(); | |
| /* | |
| * Stop kthread 'psimon' after releasing rtpoll_trigger_lock to prevent | |
| * a deadlock while waiting for psi_rtpoll_work to acquire | |
| * rtpoll_trigger_lock | |
| */ | |
| if (task_to_destroy) { | |
| /* | |
| * After the RCU grace period has expired, the worker | |
| * can no longer be found through group->rtpoll_task. | |
| */ | |
| kthread_stop(task_to_destroy); | |
| atomic_set(&group->rtpoll_scheduled, 0); | |
| } | |
| kfree(t); | |
| } | |
| __poll_t psi_trigger_poll(void **trigger_ptr, | |
| struct file *file, poll_table *wait) | |
| { | |
| __poll_t ret = DEFAULT_POLLMASK; | |
| struct psi_trigger *t; | |
| if (static_branch_likely(&psi_disabled)) | |
| return DEFAULT_POLLMASK | EPOLLERR | EPOLLPRI; | |
| t = smp_load_acquire(trigger_ptr); | |
| if (!t) | |
| return DEFAULT_POLLMASK | EPOLLERR | EPOLLPRI; | |
| if (t->of) | |
| kernfs_generic_poll(t->of, wait); | |
| else | |
| poll_wait(file, &t->event_wait, wait); | |
| if (cmpxchg(&t->event, 1, 0) == 1) | |
| ret |= EPOLLPRI; | |
| return ret; | |
| } | |
| #ifdef CONFIG_PROC_FS | |
| static int psi_io_show(struct seq_file *m, void *v) | |
| { | |
| return psi_show(m, &psi_system, PSI_IO); | |
| } | |
| static int psi_memory_show(struct seq_file *m, void *v) | |
| { | |
| return psi_show(m, &psi_system, PSI_MEM); | |
| } | |
| static int psi_cpu_show(struct seq_file *m, void *v) | |
| { | |
| return psi_show(m, &psi_system, PSI_CPU); | |
| } | |
| static int psi_io_open(struct inode *inode, struct file *file) | |
| { | |
| return single_open(file, psi_io_show, NULL); | |
| } | |
| static int psi_memory_open(struct inode *inode, struct file *file) | |
| { | |
| return single_open(file, psi_memory_show, NULL); | |
| } | |
| static int psi_cpu_open(struct inode *inode, struct file *file) | |
| { | |
| return single_open(file, psi_cpu_show, NULL); | |
| } | |
| static ssize_t psi_write(struct file *file, const char __user *user_buf, | |
| size_t nbytes, enum psi_res res) | |
| { | |
| char buf[32]; | |
| size_t buf_size; | |
| struct seq_file *seq; | |
| struct psi_trigger *new; | |
| bool need_rtpoll_worker; | |
| int ret; | |
| if (static_branch_likely(&psi_disabled)) | |
| return -EOPNOTSUPP; | |
| if (!nbytes) | |
| return -EINVAL; | |
| buf_size = min(nbytes, sizeof(buf)); | |
| if (copy_from_user(buf, user_buf, buf_size)) | |
| return -EFAULT; | |
| buf[buf_size - 1] = '\0'; | |
| seq = file->private_data; | |
| /* Take seq->lock to protect seq->private from concurrent writes */ | |
| mutex_lock(&seq->lock); | |
| /* Allow only one trigger per file descriptor */ | |
| if (seq->private) { | |
| mutex_unlock(&seq->lock); | |
| return -EBUSY; | |
| } | |
| new = psi_trigger_create(&psi_system, buf, res, file, NULL, | |
| &need_rtpoll_worker); | |
| if (IS_ERR(new)) { | |
| mutex_unlock(&seq->lock); | |
| return PTR_ERR(new); | |
| } | |
| if (need_rtpoll_worker) { | |
| ret = psi_trigger_create_rtpoll_worker(&psi_system); | |
| if (ret) { | |
| psi_trigger_destroy(new); | |
| mutex_unlock(&seq->lock); | |
| return ret; | |
| } | |
| } | |
| smp_store_release(&seq->private, new); | |
| mutex_unlock(&seq->lock); | |
| return nbytes; | |
| } | |
| static ssize_t psi_io_write(struct file *file, const char __user *user_buf, | |
| size_t nbytes, loff_t *ppos) | |
| { | |
| return psi_write(file, user_buf, nbytes, PSI_IO); | |
| } | |
| static ssize_t psi_memory_write(struct file *file, const char __user *user_buf, | |
| size_t nbytes, loff_t *ppos) | |
| { | |
| return psi_write(file, user_buf, nbytes, PSI_MEM); | |
| } | |
| static ssize_t psi_cpu_write(struct file *file, const char __user *user_buf, | |
| size_t nbytes, loff_t *ppos) | |
| { | |
| return psi_write(file, user_buf, nbytes, PSI_CPU); | |
| } | |
| static __poll_t psi_fop_poll(struct file *file, poll_table *wait) | |
| { | |
| struct seq_file *seq = file->private_data; | |
| return psi_trigger_poll(&seq->private, file, wait); | |
| } | |
| static int psi_fop_release(struct inode *inode, struct file *file) | |
| { | |
| struct seq_file *seq = file->private_data; | |
| psi_trigger_destroy(seq->private); | |
| return single_release(inode, file); | |
| } | |
| static const struct proc_ops psi_io_proc_ops = { | |
| .proc_open = psi_io_open, | |
| .proc_read = seq_read, | |
| .proc_lseek = seq_lseek, | |
| .proc_write = psi_io_write, | |
| .proc_poll = psi_fop_poll, | |
| .proc_release = psi_fop_release, | |
| }; | |
| static const struct proc_ops psi_memory_proc_ops = { | |
| .proc_open = psi_memory_open, | |
| .proc_read = seq_read, | |
| .proc_lseek = seq_lseek, | |
| .proc_write = psi_memory_write, | |
| .proc_poll = psi_fop_poll, | |
| .proc_release = psi_fop_release, | |
| }; | |
| static const struct proc_ops psi_cpu_proc_ops = { | |
| .proc_open = psi_cpu_open, | |
| .proc_read = seq_read, | |
| .proc_lseek = seq_lseek, | |
| .proc_write = psi_cpu_write, | |
| .proc_poll = psi_fop_poll, | |
| .proc_release = psi_fop_release, | |
| }; | |
| #ifdef CONFIG_IRQ_TIME_ACCOUNTING | |
| static int psi_irq_show(struct seq_file *m, void *v) | |
| { | |
| return psi_show(m, &psi_system, PSI_IRQ); | |
| } | |
| static int psi_irq_open(struct inode *inode, struct file *file) | |
| { | |
| return single_open(file, psi_irq_show, NULL); | |
| } | |
| static ssize_t psi_irq_write(struct file *file, const char __user *user_buf, | |
| size_t nbytes, loff_t *ppos) | |
| { | |
| return psi_write(file, user_buf, nbytes, PSI_IRQ); | |
| } | |
| static const struct proc_ops psi_irq_proc_ops = { | |
| .proc_open = psi_irq_open, | |
| .proc_read = seq_read, | |
| .proc_lseek = seq_lseek, | |
| .proc_write = psi_irq_write, | |
| .proc_poll = psi_fop_poll, | |
| .proc_release = psi_fop_release, | |
| }; | |
| #endif /* CONFIG_IRQ_TIME_ACCOUNTING */ | |
| static int __init psi_proc_init(void) | |
| { | |
| if (psi_enable) { | |
| proc_mkdir("pressure", NULL); | |
| proc_create("pressure/io", 0666, NULL, &psi_io_proc_ops); | |
| proc_create("pressure/memory", 0666, NULL, &psi_memory_proc_ops); | |
| proc_create("pressure/cpu", 0666, NULL, &psi_cpu_proc_ops); | |
| #ifdef CONFIG_IRQ_TIME_ACCOUNTING | |
| proc_create("pressure/irq", 0666, NULL, &psi_irq_proc_ops); | |
| #endif | |
| } | |
| return 0; | |
| } | |
| module_init(psi_proc_init); | |
| #endif /* CONFIG_PROC_FS */ |