| // SPDX-License-Identifier: GPL-2.0-only | |
| /* | |
| * linux/kernel/signal.c | |
| * | |
| * Copyright (C) 1991, 1992 Linus Torvalds | |
| * | |
| * 1997-11-02 Modified for POSIX.1b signals by Richard Henderson | |
| * | |
| * 2003-06-02 Jim Houston - Concurrent Computer Corp. | |
| * Changes to use preallocated sigqueue structures | |
| * to allow signals to be sent reliably. | |
| */ | |
| #include <linux/slab.h> | |
| #include <linux/export.h> | |
| #include <linux/init.h> | |
| #include <linux/sched/mm.h> | |
| #include <linux/sched/user.h> | |
| #include <linux/sched/debug.h> | |
| #include <linux/sched/task.h> | |
| #include <linux/sched/task_stack.h> | |
| #include <linux/sched/cputime.h> | |
| #include <linux/file.h> | |
| #include <linux/fs.h> | |
| #include <linux/mm.h> | |
| #include <linux/proc_fs.h> | |
| #include <linux/tty.h> | |
| #include <linux/binfmts.h> | |
| #include <linux/coredump.h> | |
| #include <linux/security.h> | |
| #include <linux/syscalls.h> | |
| #include <linux/ptrace.h> | |
| #include <linux/signal.h> | |
| #include <linux/signalfd.h> | |
| #include <linux/ratelimit.h> | |
| #include <linux/task_work.h> | |
| #include <linux/capability.h> | |
| #include <linux/freezer.h> | |
| #include <linux/pid_namespace.h> | |
| #include <linux/nsproxy.h> | |
| #include <linux/user_namespace.h> | |
| #include <linux/uprobes.h> | |
| #include <linux/compat.h> | |
| #include <linux/cn_proc.h> | |
| #include <linux/compiler.h> | |
| #include <linux/posix-timers.h> | |
| #include <linux/cgroup.h> | |
| #include <linux/audit.h> | |
| #include <linux/sysctl.h> | |
| #include <uapi/linux/pidfd.h> | |
| #define CREATE_TRACE_POINTS | |
| #include <trace/events/signal.h> | |
| #include <asm/param.h> | |
| #include <linux/uaccess.h> | |
| #include <asm/unistd.h> | |
| #include <asm/siginfo.h> | |
| #include <asm/cacheflush.h> | |
| #include <asm/syscall.h> /* for syscall_get_* */ | |
| #include "time/posix-timers.h" | |
| /* | |
| * SLAB caches for signal bits. | |
| */ | |
| static struct kmem_cache *sigqueue_cachep; | |
| int print_fatal_signals __read_mostly; | |
| static void __user *sig_handler(struct task_struct *t, int sig) | |
| { | |
| return t->sighand->action[sig - 1].sa.sa_handler; | |
| } | |
| static inline bool sig_handler_ignored(void __user *handler, int sig) | |
| { | |
| /* Is it explicitly or implicitly ignored? */ | |
| return handler == SIG_IGN || | |
| (handler == SIG_DFL && sig_kernel_ignore(sig)); | |
| } | |
| static bool sig_task_ignored(struct task_struct *t, int sig, bool force) | |
| { | |
| void __user *handler; | |
| handler = sig_handler(t, sig); | |
| /* SIGKILL and SIGSTOP may not be sent to the global init */ | |
| if (unlikely(is_global_init(t) && sig_kernel_only(sig))) | |
| return true; | |
| if (unlikely(t->signal->flags & SIGNAL_UNKILLABLE) && | |
| handler == SIG_DFL && !(force && sig_kernel_only(sig))) | |
| return true; | |
| /* Only allow kernel generated signals to this kthread */ | |
| if (unlikely((t->flags & PF_KTHREAD) && | |
| (handler == SIG_KTHREAD_KERNEL) && !force)) | |
| return true; | |
| return sig_handler_ignored(handler, sig); | |
| } | |
| static bool sig_ignored(struct task_struct *t, int sig, bool force) | |
| { | |
| /* | |
| * Blocked signals are never ignored, since the | |
| * signal handler may change by the time it is | |
| * unblocked. | |
| */ | |
| if (sigismember(&t->blocked, sig) || sigismember(&t->real_blocked, sig)) | |
| return false; | |
| /* | |
| * Tracers may want to know about even ignored signal unless it | |
| * is SIGKILL which can't be reported anyway but can be ignored | |
| * by SIGNAL_UNKILLABLE task. | |
| */ | |
| if (t->ptrace && sig != SIGKILL) | |
| return false; | |
| return sig_task_ignored(t, sig, force); | |
| } | |
| /* | |
| * Re-calculate pending state from the set of locally pending | |
| * signals, globally pending signals, and blocked signals. | |
| */ | |
| static inline bool has_pending_signals(sigset_t *signal, sigset_t *blocked) | |
| { | |
| unsigned long ready = 0; | |
| for (long i = 0; i < _NSIG_WORDS; i++) | |
| ready |= signal->sig[i] & ~blocked->sig[i]; | |
| return ready != 0; | |
| } | |
| #define PENDING(p,b) has_pending_signals(&(p)->signal, (b)) | |
| static bool recalc_sigpending_tsk(struct task_struct *t) | |
| { | |
| if ((t->jobctl & (JOBCTL_PENDING_MASK | JOBCTL_TRAP_FREEZE)) || | |
| PENDING(&t->pending, &t->blocked) || | |
| PENDING(&t->signal->shared_pending, &t->blocked) || | |
| cgroup_task_frozen(t)) { | |
| set_tsk_thread_flag(t, TIF_SIGPENDING); | |
| return true; | |
| } | |
| /* | |
| * We must never clear the flag in another thread, or in current | |
| * when it's possible the current syscall is returning -ERESTART*. | |
| * So we don't clear it here, and only callers who know they should do. | |
| */ | |
| return false; | |
| } | |
| void recalc_sigpending(void) | |
| { | |
| if (!recalc_sigpending_tsk(current) && !freezing(current)) { | |
| if (unlikely(test_thread_flag(TIF_SIGPENDING))) | |
| clear_thread_flag(TIF_SIGPENDING); | |
| } | |
| } | |
| EXPORT_SYMBOL(recalc_sigpending); | |
| void calculate_sigpending(void) | |
| { | |
| /* Have any signals or users of TIF_SIGPENDING been delayed | |
| * until after fork? | |
| */ | |
| spin_lock_irq(¤t->sighand->siglock); | |
| set_tsk_thread_flag(current, TIF_SIGPENDING); | |
| recalc_sigpending(); | |
| spin_unlock_irq(¤t->sighand->siglock); | |
| } | |
| /* Given the mask, find the first available signal that should be serviced. */ | |
| #define SYNCHRONOUS_MASK \ | |
| (sigmask(SIGSEGV) | sigmask(SIGBUS) | sigmask(SIGILL) | \ | |
| sigmask(SIGTRAP) | sigmask(SIGFPE) | sigmask(SIGSYS)) | |
| int next_signal(struct sigpending *pending, sigset_t *mask) | |
| { | |
| unsigned long i, *s, *m, x; | |
| int sig = 0; | |
| s = pending->signal.sig; | |
| m = mask->sig; | |
| /* | |
| * Handle the first word specially: it contains the | |
| * synchronous signals that need to be dequeued first. | |
| */ | |
| x = *s &~ *m; | |
| if (x) { | |
| if (x & SYNCHRONOUS_MASK) | |
| x &= SYNCHRONOUS_MASK; | |
| sig = ffz(~x) + 1; | |
| return sig; | |
| } | |
| switch (_NSIG_WORDS) { | |
| default: | |
| for (i = 1; i < _NSIG_WORDS; ++i) { | |
| x = *++s &~ *++m; | |
| if (!x) | |
| continue; | |
| sig = ffz(~x) + i*_NSIG_BPW + 1; | |
| break; | |
| } | |
| break; | |
| case 2: | |
| x = s[1] &~ m[1]; | |
| if (!x) | |
| break; | |
| sig = ffz(~x) + _NSIG_BPW + 1; | |
| break; | |
| case 1: | |
| /* Nothing to do */ | |
| break; | |
| } | |
| return sig; | |
| } | |
| static inline void print_dropped_signal(int sig) | |
| { | |
| static DEFINE_RATELIMIT_STATE(ratelimit_state, 5 * HZ, 10); | |
| if (!print_fatal_signals) | |
| return; | |
| if (!__ratelimit(&ratelimit_state)) | |
| return; | |
| pr_info("%s/%d: reached RLIMIT_SIGPENDING, dropped signal %d\n", | |
| current->comm, current->pid, sig); | |
| } | |
| /** | |
| * task_set_jobctl_pending - set jobctl pending bits | |
| * @task: target task | |
| * @mask: pending bits to set | |
| * | |
| * Clear @mask from @task->jobctl. @mask must be subset of | |
| * %JOBCTL_PENDING_MASK | %JOBCTL_STOP_CONSUME | %JOBCTL_STOP_SIGMASK | | |
| * %JOBCTL_TRAPPING. If stop signo is being set, the existing signo is | |
| * cleared. If @task is already being killed or exiting, this function | |
| * becomes noop. | |
| * | |
| * CONTEXT: | |
| * Must be called with @task->sighand->siglock held. | |
| * | |
| * RETURNS: | |
| * %true if @mask is set, %false if made noop because @task was dying. | |
| */ | |
| bool task_set_jobctl_pending(struct task_struct *task, unsigned long mask) | |
| { | |
| BUG_ON(mask & ~(JOBCTL_PENDING_MASK | JOBCTL_STOP_CONSUME | | |
| JOBCTL_STOP_SIGMASK | JOBCTL_TRAPPING)); | |
| BUG_ON((mask & JOBCTL_TRAPPING) && !(mask & JOBCTL_PENDING_MASK)); | |
| if (unlikely(fatal_signal_pending(task) || (task->flags & PF_EXITING))) | |
| return false; | |
| if (mask & JOBCTL_STOP_SIGMASK) | |
| task->jobctl &= ~JOBCTL_STOP_SIGMASK; | |
| task->jobctl |= mask; | |
| return true; | |
| } | |
| /** | |
| * task_clear_jobctl_trapping - clear jobctl trapping bit | |
| * @task: target task | |
| * | |
| * If JOBCTL_TRAPPING is set, a ptracer is waiting for us to enter TRACED. | |
| * Clear it and wake up the ptracer. Note that we don't need any further | |
| * locking. @task->siglock guarantees that @task->parent points to the | |
| * ptracer. | |
| * | |
| * CONTEXT: | |
| * Must be called with @task->sighand->siglock held. | |
| */ | |
| void task_clear_jobctl_trapping(struct task_struct *task) | |
| { | |
| if (unlikely(task->jobctl & JOBCTL_TRAPPING)) { | |
| task->jobctl &= ~JOBCTL_TRAPPING; | |
| smp_mb(); /* advised by wake_up_bit() */ | |
| wake_up_bit(&task->jobctl, JOBCTL_TRAPPING_BIT); | |
| } | |
| } | |
| /** | |
| * task_clear_jobctl_pending - clear jobctl pending bits | |
| * @task: target task | |
| * @mask: pending bits to clear | |
| * | |
| * Clear @mask from @task->jobctl. @mask must be subset of | |
| * %JOBCTL_PENDING_MASK. If %JOBCTL_STOP_PENDING is being cleared, other | |
| * STOP bits are cleared together. | |
| * | |
| * If clearing of @mask leaves no stop or trap pending, this function calls | |
| * task_clear_jobctl_trapping(). | |
| * | |
| * CONTEXT: | |
| * Must be called with @task->sighand->siglock held. | |
| */ | |
| void task_clear_jobctl_pending(struct task_struct *task, unsigned long mask) | |
| { | |
| BUG_ON(mask & ~JOBCTL_PENDING_MASK); | |
| if (mask & JOBCTL_STOP_PENDING) | |
| mask |= JOBCTL_STOP_CONSUME | JOBCTL_STOP_DEQUEUED; | |
| task->jobctl &= ~mask; | |
| if (!(task->jobctl & JOBCTL_PENDING_MASK)) | |
| task_clear_jobctl_trapping(task); | |
| } | |
| /** | |
| * task_participate_group_stop - participate in a group stop | |
| * @task: task participating in a group stop | |
| * | |
| * @task has %JOBCTL_STOP_PENDING set and is participating in a group stop. | |
| * Group stop states are cleared and the group stop count is consumed if | |
| * %JOBCTL_STOP_CONSUME was set. If the consumption completes the group | |
| * stop, the appropriate `SIGNAL_*` flags are set. | |
| * | |
| * CONTEXT: | |
| * Must be called with @task->sighand->siglock held. | |
| * | |
| * RETURNS: | |
| * %true if group stop completion should be notified to the parent, %false | |
| * otherwise. | |
| */ | |
| static bool task_participate_group_stop(struct task_struct *task) | |
| { | |
| struct signal_struct *sig = task->signal; | |
| bool consume = task->jobctl & JOBCTL_STOP_CONSUME; | |
| WARN_ON_ONCE(!(task->jobctl & JOBCTL_STOP_PENDING)); | |
| task_clear_jobctl_pending(task, JOBCTL_STOP_PENDING); | |
| if (!consume) | |
| return false; | |
| if (!WARN_ON_ONCE(sig->group_stop_count == 0)) | |
| sig->group_stop_count--; | |
| /* | |
| * Tell the caller to notify completion iff we are entering into a | |
| * fresh group stop. Read comment in do_signal_stop() for details. | |
| */ | |
| if (!sig->group_stop_count && !(sig->flags & SIGNAL_STOP_STOPPED)) { | |
| signal_set_stop_flags(sig, SIGNAL_STOP_STOPPED); | |
| return true; | |
| } | |
| return false; | |
| } | |
| void task_join_group_stop(struct task_struct *task) | |
| { | |
| unsigned long mask = current->jobctl & JOBCTL_STOP_SIGMASK; | |
| struct signal_struct *sig = current->signal; | |
| if (sig->group_stop_count) { | |
| sig->group_stop_count++; | |
| mask |= JOBCTL_STOP_CONSUME; | |
| } else if (!(sig->flags & SIGNAL_STOP_STOPPED)) | |
| return; | |
| /* Have the new thread join an on-going signal group stop */ | |
| task_set_jobctl_pending(task, mask | JOBCTL_STOP_PENDING); | |
| } | |
| static struct ucounts *sig_get_ucounts(struct task_struct *t, int sig, | |
| int override_rlimit) | |
| { | |
| struct ucounts *ucounts; | |
| long sigpending; | |
| /* | |
| * Protect access to @t credentials. This can go away when all | |
| * callers hold rcu read lock. | |
| * | |
| * NOTE! A pending signal will hold on to the user refcount, | |
| * and we get/put the refcount only when the sigpending count | |
| * changes from/to zero. | |
| */ | |
| rcu_read_lock(); | |
| ucounts = task_ucounts(t); | |
| sigpending = inc_rlimit_get_ucounts(ucounts, UCOUNT_RLIMIT_SIGPENDING, | |
| override_rlimit); | |
| rcu_read_unlock(); | |
| if (!sigpending) | |
| return NULL; | |
| if (unlikely(!override_rlimit && sigpending > task_rlimit(t, RLIMIT_SIGPENDING))) { | |
| dec_rlimit_put_ucounts(ucounts, UCOUNT_RLIMIT_SIGPENDING); | |
| print_dropped_signal(sig); | |
| return NULL; | |
| } | |
| return ucounts; | |
| } | |
| static void __sigqueue_init(struct sigqueue *q, struct ucounts *ucounts, | |
| const unsigned int sigqueue_flags) | |
| { | |
| INIT_LIST_HEAD(&q->list); | |
| q->flags = sigqueue_flags; | |
| q->ucounts = ucounts; | |
| } | |
| /* | |
| * allocate a new signal queue record | |
| * - this may be called without locks if and only if t == current, otherwise an | |
| * appropriate lock must be held to stop the target task from exiting | |
| */ | |
| static struct sigqueue *sigqueue_alloc(int sig, struct task_struct *t, gfp_t gfp_flags, | |
| int override_rlimit) | |
| { | |
| struct ucounts *ucounts = sig_get_ucounts(t, sig, override_rlimit); | |
| struct sigqueue *q; | |
| if (!ucounts) | |
| return NULL; | |
| q = kmem_cache_alloc(sigqueue_cachep, gfp_flags); | |
| if (!q) { | |
| dec_rlimit_put_ucounts(ucounts, UCOUNT_RLIMIT_SIGPENDING); | |
| return NULL; | |
| } | |
| __sigqueue_init(q, ucounts, 0); | |
| return q; | |
| } | |
| static void __sigqueue_free(struct sigqueue *q) | |
| { | |
| if (q->flags & SIGQUEUE_PREALLOC) { | |
| posixtimer_sigqueue_putref(q); | |
| return; | |
| } | |
| if (q->ucounts) { | |
| dec_rlimit_put_ucounts(q->ucounts, UCOUNT_RLIMIT_SIGPENDING); | |
| q->ucounts = NULL; | |
| } | |
| kmem_cache_free(sigqueue_cachep, q); | |
| } | |
| /* | |
| * flush_sigqueue_list() can only be invoked without holding sighand::siglock in | |
| * the following cases: | |
| * | |
| * 1) When flushing task::pending _after_ setting task::flags PF_EXITING | |
| * | |
| * All functions which try to send a signal to @task will observe PF_EXITING | |
| * and drop the signal. | |
| * | |
| * 2) When flushing task::signal::shared_pending _after_ the last task in a | |
| * thread group was unhashed and task::sighand is NULL. | |
| * | |
| * Nothing can queue a signal anymore because sighand is NULL. | |
| */ | |
| static void flush_sigqueue_list(struct list_head *head) | |
| { | |
| struct sigqueue *q, *tmp; | |
| list_for_each_entry_safe(q, tmp, head, list) { | |
| list_del_init(&q->list); | |
| __sigqueue_free(q); | |
| } | |
| } | |
| void flush_sigqueue(struct sigpending *queue) | |
| { | |
| sigemptyset(&queue->signal); | |
| flush_sigqueue_list(&queue->list); | |
| } | |
| static void sigqueue_dequeue_pending(struct sigpending *queue, struct list_head *head) | |
| { | |
| sigemptyset(&queue->signal); | |
| list_splice_init(&queue->list, head); | |
| } | |
| /* | |
| * Flush all pending signals for this kthread. | |
| */ | |
| void flush_signals(struct task_struct *t) | |
| { | |
| unsigned long flags; | |
| spin_lock_irqsave(&t->sighand->siglock, flags); | |
| clear_tsk_thread_flag(t, TIF_SIGPENDING); | |
| flush_sigqueue(&t->pending); | |
| flush_sigqueue(&t->signal->shared_pending); | |
| spin_unlock_irqrestore(&t->sighand->siglock, flags); | |
| } | |
| EXPORT_SYMBOL(flush_signals); | |
| void ignore_signals(struct task_struct *t) | |
| { | |
| int i; | |
| for (i = 0; i < _NSIG; ++i) | |
| t->sighand->action[i].sa.sa_handler = SIG_IGN; | |
| flush_signals(t); | |
| } | |
| /* | |
| * Flush all handlers for a task. | |
| */ | |
| void | |
| flush_signal_handlers(struct task_struct *t, int force_default) | |
| { | |
| int i; | |
| struct k_sigaction *ka = &t->sighand->action[0]; | |
| for (i = _NSIG ; i != 0 ; i--) { | |
| if (force_default || ka->sa.sa_handler != SIG_IGN) | |
| ka->sa.sa_handler = SIG_DFL; | |
| ka->sa.sa_flags = 0; | |
| #ifdef __ARCH_HAS_SA_RESTORER | |
| ka->sa.sa_restorer = NULL; | |
| #endif | |
| sigemptyset(&ka->sa.sa_mask); | |
| ka++; | |
| } | |
| } | |
| bool unhandled_signal(struct task_struct *tsk, int sig) | |
| { | |
| void __user *handler = tsk->sighand->action[sig-1].sa.sa_handler; | |
| if (is_global_init(tsk)) | |
| return true; | |
| if (handler != SIG_IGN && handler != SIG_DFL) | |
| return false; | |
| /* If dying, we handle all new signals by ignoring them */ | |
| if (fatal_signal_pending(tsk)) | |
| return false; | |
| /* if ptraced, let the tracer determine */ | |
| return !tsk->ptrace; | |
| } | |
| static void collect_signal(int sig, struct sigpending *list, kernel_siginfo_t *info, | |
| struct sigqueue **timer_sigq) | |
| { | |
| struct sigqueue *q, *first = NULL; | |
| /* | |
| * Collect the siginfo appropriate to this signal. Check if | |
| * there is another siginfo for the same signal. | |
| */ | |
| list_for_each_entry(q, &list->list, list) { | |
| if (q->info.si_signo == sig) { | |
| if (first) | |
| goto still_pending; | |
| first = q; | |
| } | |
| } | |
| sigdelset(&list->signal, sig); | |
| if (first) { | |
| still_pending: | |
| list_del_init(&first->list); | |
| copy_siginfo(info, &first->info); | |
| /* | |
| * posix-timer signals are preallocated and freed when the last | |
| * reference count is dropped in posixtimer_deliver_signal() or | |
| * immediately on timer deletion when the signal is not pending. | |
| * Spare the extra round through __sigqueue_free() which is | |
| * ignoring preallocated signals. | |
| */ | |
| if (unlikely((first->flags & SIGQUEUE_PREALLOC) && (info->si_code == SI_TIMER))) | |
| *timer_sigq = first; | |
| else | |
| __sigqueue_free(first); | |
| } else { | |
| /* | |
| * Ok, it wasn't in the queue. This must be | |
| * a fast-pathed signal or we must have been | |
| * out of queue space. So zero out the info. | |
| */ | |
| clear_siginfo(info); | |
| info->si_signo = sig; | |
| info->si_errno = 0; | |
| info->si_code = SI_USER; | |
| info->si_pid = 0; | |
| info->si_uid = 0; | |
| } | |
| } | |
| static int __dequeue_signal(struct sigpending *pending, sigset_t *mask, | |
| kernel_siginfo_t *info, struct sigqueue **timer_sigq) | |
| { | |
| int sig = next_signal(pending, mask); | |
| if (sig) | |
| collect_signal(sig, pending, info, timer_sigq); | |
| return sig; | |
| } | |
| /* | |
| * Try to dequeue a signal. If a deliverable signal is found fill in the | |
| * caller provided siginfo and return the signal number. Otherwise return | |
| * 0. | |
| */ | |
| int dequeue_signal(sigset_t *mask, kernel_siginfo_t *info, enum pid_type *type) | |
| { | |
| struct task_struct *tsk = current; | |
| struct sigqueue *timer_sigq; | |
| int signr; | |
| lockdep_assert_held(&tsk->sighand->siglock); | |
| again: | |
| *type = PIDTYPE_PID; | |
| timer_sigq = NULL; | |
| signr = __dequeue_signal(&tsk->pending, mask, info, &timer_sigq); | |
| if (!signr) { | |
| *type = PIDTYPE_TGID; | |
| signr = __dequeue_signal(&tsk->signal->shared_pending, | |
| mask, info, &timer_sigq); | |
| if (unlikely(signr == SIGALRM)) | |
| posixtimer_rearm_itimer(tsk); | |
| } | |
| recalc_sigpending(); | |
| if (!signr) | |
| return 0; | |
| if (unlikely(sig_kernel_stop(signr))) { | |
| /* | |
| * Set a marker that we have dequeued a stop signal. Our | |
| * caller might release the siglock and then the pending | |
| * stop signal it is about to process is no longer in the | |
| * pending bitmasks, but must still be cleared by a SIGCONT | |
| * (and overruled by a SIGKILL). So those cases clear this | |
| * shared flag after we've set it. Note that this flag may | |
| * remain set after the signal we return is ignored or | |
| * handled. That doesn't matter because its only purpose | |
| * is to alert stop-signal processing code when another | |
| * processor has come along and cleared the flag. | |
| */ | |
| current->jobctl |= JOBCTL_STOP_DEQUEUED; | |
| } | |
| if (IS_ENABLED(CONFIG_POSIX_TIMERS) && unlikely(timer_sigq)) { | |
| if (!posixtimer_deliver_signal(info, timer_sigq)) | |
| goto again; | |
| } | |
| return signr; | |
| } | |
| EXPORT_SYMBOL_GPL(dequeue_signal); | |
| static int dequeue_synchronous_signal(kernel_siginfo_t *info) | |
| { | |
| struct task_struct *tsk = current; | |
| struct sigpending *pending = &tsk->pending; | |
| struct sigqueue *q, *sync = NULL; | |
| /* | |
| * Might a synchronous signal be in the queue? | |
| */ | |
| if (!((pending->signal.sig[0] & ~tsk->blocked.sig[0]) & SYNCHRONOUS_MASK)) | |
| return 0; | |
| /* | |
| * Return the first synchronous signal in the queue. | |
| */ | |
| list_for_each_entry(q, &pending->list, list) { | |
| /* Synchronous signals have a positive si_code */ | |
| if ((q->info.si_code > SI_USER) && | |
| (sigmask(q->info.si_signo) & SYNCHRONOUS_MASK)) { | |
| sync = q; | |
| goto next; | |
| } | |
| } | |
| return 0; | |
| next: | |
| /* | |
| * Check if there is another siginfo for the same signal. | |
| */ | |
| list_for_each_entry_continue(q, &pending->list, list) { | |
| if (q->info.si_signo == sync->info.si_signo) | |
| goto still_pending; | |
| } | |
| sigdelset(&pending->signal, sync->info.si_signo); | |
| recalc_sigpending(); | |
| still_pending: | |
| list_del_init(&sync->list); | |
| copy_siginfo(info, &sync->info); | |
| __sigqueue_free(sync); | |
| return info->si_signo; | |
| } | |
| /* | |
| * Tell a process that it has a new active signal.. | |
| * | |
| * NOTE! we rely on the previous spin_lock to | |
| * lock interrupts for us! We can only be called with | |
| * "siglock" held, and the local interrupt must | |
| * have been disabled when that got acquired! | |
| * | |
| * No need to set need_resched since signal event passing | |
| * goes through ->blocked | |
| */ | |
| void signal_wake_up_state(struct task_struct *t, unsigned int state) | |
| { | |
| lockdep_assert_held(&t->sighand->siglock); | |
| set_tsk_thread_flag(t, TIF_SIGPENDING); | |
| /* | |
| * TASK_WAKEKILL also means wake it up in the stopped/traced/killable | |
| * case. We don't check t->state here because there is a race with it | |
| * executing another processor and just now entering stopped state. | |
| * By using wake_up_state, we ensure the process will wake up and | |
| * handle its death signal. | |
| */ | |
| if (!wake_up_state(t, state | TASK_INTERRUPTIBLE)) | |
| kick_process(t); | |
| } | |
| static inline void posixtimer_sig_ignore(struct task_struct *tsk, struct sigqueue *q); | |
| static void sigqueue_free_ignored(struct task_struct *tsk, struct sigqueue *q) | |
| { | |
| if (likely(!(q->flags & SIGQUEUE_PREALLOC) || q->info.si_code != SI_TIMER)) | |
| __sigqueue_free(q); | |
| else | |
| posixtimer_sig_ignore(tsk, q); | |
| } | |
| /* Remove signals in mask from the pending set and queue. */ | |
| static void flush_sigqueue_mask(struct task_struct *p, sigset_t *mask, struct sigpending *s) | |
| { | |
| struct sigqueue *q, *n; | |
| sigset_t m; | |
| lockdep_assert_held(&p->sighand->siglock); | |
| sigandsets(&m, mask, &s->signal); | |
| if (sigisemptyset(&m)) | |
| return; | |
| sigandnsets(&s->signal, &s->signal, mask); | |
| list_for_each_entry_safe(q, n, &s->list, list) { | |
| if (sigismember(mask, q->info.si_signo)) { | |
| list_del_init(&q->list); | |
| sigqueue_free_ignored(p, q); | |
| } | |
| } | |
| } | |
| static inline int is_si_special(const struct kernel_siginfo *info) | |
| { | |
| return info <= SEND_SIG_PRIV; | |
| } | |
| static inline bool si_fromuser(const struct kernel_siginfo *info) | |
| { | |
| return info == SEND_SIG_NOINFO || | |
| (!is_si_special(info) && SI_FROMUSER(info)); | |
| } | |
| /* | |
| * called with RCU read lock from check_kill_permission() | |
| */ | |
| static bool kill_ok_by_cred(struct task_struct *t) | |
| { | |
| const struct cred *cred = current_cred(); | |
| const struct cred *tcred = __task_cred(t); | |
| return uid_eq(cred->euid, tcred->suid) || | |
| uid_eq(cred->euid, tcred->uid) || | |
| uid_eq(cred->uid, tcred->suid) || | |
| uid_eq(cred->uid, tcred->uid) || | |
| ns_capable(tcred->user_ns, CAP_KILL); | |
| } | |
| /* | |
| * Bad permissions for sending the signal | |
| * - the caller must hold the RCU read lock | |
| */ | |
| static int check_kill_permission(int sig, struct kernel_siginfo *info, | |
| struct task_struct *t) | |
| { | |
| struct pid *sid; | |
| int error; | |
| if (!valid_signal(sig)) | |
| return -EINVAL; | |
| if (!si_fromuser(info)) | |
| return 0; | |
| error = audit_signal_info(sig, t); /* Let audit system see the signal */ | |
| if (error) | |
| return error; | |
| if (!same_thread_group(current, t) && | |
| !kill_ok_by_cred(t)) { | |
| switch (sig) { | |
| case SIGCONT: | |
| sid = task_session(t); | |
| /* | |
| * We don't return the error if sid == NULL. The | |
| * task was unhashed, the caller must notice this. | |
| */ | |
| if (!sid || sid == task_session(current)) | |
| break; | |
| fallthrough; | |
| default: | |
| return -EPERM; | |
| } | |
| } | |
| return security_task_kill(t, info, sig, NULL); | |
| } | |
| /** | |
| * ptrace_trap_notify - schedule trap to notify ptracer | |
| * @t: tracee wanting to notify tracer | |
| * | |
| * This function schedules sticky ptrace trap which is cleared on the next | |
| * TRAP_STOP to notify ptracer of an event. @t must have been seized by | |
| * ptracer. | |
| * | |
| * If @t is running, STOP trap will be taken. If trapped for STOP and | |
| * ptracer is listening for events, tracee is woken up so that it can | |
| * re-trap for the new event. If trapped otherwise, STOP trap will be | |
| * eventually taken without returning to userland after the existing traps | |
| * are finished by PTRACE_CONT. | |
| * | |
| * CONTEXT: | |
| * Must be called with @task->sighand->siglock held. | |
| */ | |
| static void ptrace_trap_notify(struct task_struct *t) | |
| { | |
| WARN_ON_ONCE(!(t->ptrace & PT_SEIZED)); | |
| lockdep_assert_held(&t->sighand->siglock); | |
| task_set_jobctl_pending(t, JOBCTL_TRAP_NOTIFY); | |
| ptrace_signal_wake_up(t, t->jobctl & JOBCTL_LISTENING); | |
| } | |
| /* | |
| * Handle magic process-wide effects of stop/continue signals. Unlike | |
| * the signal actions, these happen immediately at signal-generation | |
| * time regardless of blocking, ignoring, or handling. This does the | |
| * actual continuing for SIGCONT, but not the actual stopping for stop | |
| * signals. The process stop is done as a signal action for SIG_DFL. | |
| * | |
| * Returns true if the signal should be actually delivered, otherwise | |
| * it should be dropped. | |
| */ | |
| static bool prepare_signal(int sig, struct task_struct *p, bool force) | |
| { | |
| struct signal_struct *signal = p->signal; | |
| struct task_struct *t; | |
| sigset_t flush; | |
| if (signal->flags & SIGNAL_GROUP_EXIT) { | |
| if (signal->core_state) | |
| return sig == SIGKILL; | |
| /* | |
| * The process is in the middle of dying, drop the signal. | |
| */ | |
| return false; | |
| } else if (sig_kernel_stop(sig)) { | |
| /* | |
| * This is a stop signal. Remove SIGCONT from all queues. | |
| */ | |
| siginitset(&flush, sigmask(SIGCONT)); | |
| flush_sigqueue_mask(p, &flush, &signal->shared_pending); | |
| for_each_thread(p, t) | |
| flush_sigqueue_mask(p, &flush, &t->pending); | |
| } else if (sig == SIGCONT) { | |
| unsigned int why; | |
| /* | |
| * Remove all stop signals from all queues, wake all threads. | |
| */ | |
| siginitset(&flush, SIG_KERNEL_STOP_MASK); | |
| flush_sigqueue_mask(p, &flush, &signal->shared_pending); | |
| for_each_thread(p, t) { | |
| flush_sigqueue_mask(p, &flush, &t->pending); | |
| task_clear_jobctl_pending(t, JOBCTL_STOP_PENDING); | |
| if (likely(!(t->ptrace & PT_SEIZED))) { | |
| t->jobctl &= ~JOBCTL_STOPPED; | |
| wake_up_state(t, __TASK_STOPPED); | |
| } else | |
| ptrace_trap_notify(t); | |
| } | |
| /* | |
| * Notify the parent with CLD_CONTINUED if we were stopped. | |
| * | |
| * If we were in the middle of a group stop, we pretend it | |
| * was already finished, and then continued. Since SIGCHLD | |
| * doesn't queue we report only CLD_STOPPED, as if the next | |
| * CLD_CONTINUED was dropped. | |
| */ | |
| why = 0; | |
| if (signal->flags & SIGNAL_STOP_STOPPED) | |
| why |= SIGNAL_CLD_CONTINUED; | |
| else if (signal->group_stop_count) | |
| why |= SIGNAL_CLD_STOPPED; | |
| if (why) { | |
| /* | |
| * The first thread which returns from do_signal_stop() | |
| * will take ->siglock, notice SIGNAL_CLD_MASK, and | |
| * notify its parent. See get_signal(). | |
| */ | |
| signal_set_stop_flags(signal, why | SIGNAL_STOP_CONTINUED); | |
| signal->group_stop_count = 0; | |
| signal->group_exit_code = 0; | |
| } | |
| } | |
| return !sig_ignored(p, sig, force); | |
| } | |
| /* | |
| * Test if P wants to take SIG. After we've checked all threads with this, | |
| * it's equivalent to finding no threads not blocking SIG. Any threads not | |
| * blocking SIG were ruled out because they are not running and already | |
| * have pending signals. Such threads will dequeue from the shared queue | |
| * as soon as they're available, so putting the signal on the shared queue | |
| * will be equivalent to sending it to one such thread. | |
| */ | |
| static inline bool wants_signal(int sig, struct task_struct *p) | |
| { | |
| if (sigismember(&p->blocked, sig)) | |
| return false; | |
| if (p->flags & PF_EXITING) | |
| return false; | |
| if (sig == SIGKILL) | |
| return true; | |
| if (task_is_stopped_or_traced(p)) | |
| return false; | |
| return task_curr(p) || !task_sigpending(p); | |
| } | |
| static void complete_signal(int sig, struct task_struct *p, enum pid_type type) | |
| { | |
| struct signal_struct *signal = p->signal; | |
| struct task_struct *t; | |
| /* | |
| * Now find a thread we can wake up to take the signal off the queue. | |
| * | |
| * Try the suggested task first (may or may not be the main thread). | |
| */ | |
| if (wants_signal(sig, p)) | |
| t = p; | |
| else if ((type == PIDTYPE_PID) || thread_group_empty(p)) | |
| /* | |
| * There is just one thread and it does not need to be woken. | |
| * It will dequeue unblocked signals before it runs again. | |
| */ | |
| return; | |
| else { | |
| /* | |
| * Otherwise try to find a suitable thread. | |
| */ | |
| t = signal->curr_target; | |
| while (!wants_signal(sig, t)) { | |
| t = next_thread(t); | |
| if (t == signal->curr_target) | |
| /* | |
| * No thread needs to be woken. | |
| * Any eligible threads will see | |
| * the signal in the queue soon. | |
| */ | |
| return; | |
| } | |
| signal->curr_target = t; | |
| } | |
| /* | |
| * Found a killable thread. If the signal will be fatal, | |
| * then start taking the whole group down immediately. | |
| */ | |
| if (sig_fatal(p, sig) && !sigismember(&t->real_blocked, sig) && | |
| (sig == SIGKILL || !p->ptrace)) { | |
| /* | |
| * This signal will be fatal to the whole group. | |
| */ | |
| if (!sig_kernel_coredump(sig)) { | |
| /* | |
| * Start a group exit and wake everybody up. | |
| * This way we don't have other threads | |
| * running and doing things after a slower | |
| * thread has the fatal signal pending. | |
| */ | |
| signal->flags = SIGNAL_GROUP_EXIT; | |
| signal->group_exit_code = sig; | |
| signal->group_stop_count = 0; | |
| __for_each_thread(signal, t) { | |
| task_clear_jobctl_pending(t, JOBCTL_PENDING_MASK); | |
| sigaddset(&t->pending.signal, SIGKILL); | |
| signal_wake_up(t, 1); | |
| } | |
| return; | |
| } | |
| } | |
| /* | |
| * The signal is already in the shared-pending queue. | |
| * Tell the chosen thread to wake up and dequeue it. | |
| */ | |
| signal_wake_up(t, sig == SIGKILL); | |
| return; | |
| } | |
| static inline bool legacy_queue(struct sigpending *signals, int sig) | |
| { | |
| return (sig < SIGRTMIN) && sigismember(&signals->signal, sig); | |
| } | |
| /* | |
| * When PF_EXITING is set the task is on the way out and has t::pending | |
| * flushed already. Prevent queueing of PIDTYPE_PID signals as they would | |
| * be leaked. | |
| */ | |
| static inline bool task_can_queue_signal(struct task_struct *t, enum pid_type type) | |
| { | |
| lockdep_assert_held(&t->sighand->siglock); | |
| if (!(t->flags & PF_EXITING)) | |
| return true; | |
| return type != PIDTYPE_PID; | |
| } | |
| static int __send_signal_locked(int sig, struct kernel_siginfo *info, | |
| struct task_struct *t, enum pid_type type, bool force) | |
| { | |
| struct sigpending *pending; | |
| struct sigqueue *q; | |
| int override_rlimit; | |
| int ret = 0, result; | |
| lockdep_assert_held(&t->sighand->siglock); | |
| result = TRACE_SIGNAL_IGNORED; | |
| if (!task_can_queue_signal(t, type)) | |
| goto ret; | |
| if (!prepare_signal(sig, t, force)) | |
| goto ret; | |
| pending = (type != PIDTYPE_PID) ? &t->signal->shared_pending : &t->pending; | |
| /* | |
| * Short-circuit ignored signals and support queuing | |
| * exactly one non-rt signal, so that we can get more | |
| * detailed information about the cause of the signal. | |
| */ | |
| result = TRACE_SIGNAL_ALREADY_PENDING; | |
| if (legacy_queue(pending, sig)) | |
| goto ret; | |
| result = TRACE_SIGNAL_DELIVERED; | |
| /* | |
| * Skip useless siginfo allocation for SIGKILL and kernel threads. | |
| */ | |
| if ((sig == SIGKILL) || (t->flags & PF_KTHREAD)) | |
| goto out_set; | |
| /* | |
| * Real-time signals must be queued if sent by sigqueue, or | |
| * some other real-time mechanism. It is implementation | |
| * defined whether kill() does so. We attempt to do so, on | |
| * the principle of least surprise, but since kill is not | |
| * allowed to fail with EAGAIN when low on memory we just | |
| * make sure at least one signal gets delivered and don't | |
| * pass on the info struct. | |
| */ | |
| if (sig < SIGRTMIN) | |
| override_rlimit = (is_si_special(info) || info->si_code >= 0); | |
| else | |
| override_rlimit = 0; | |
| q = sigqueue_alloc(sig, t, GFP_ATOMIC, override_rlimit); | |
| if (q) { | |
| list_add_tail(&q->list, &pending->list); | |
| switch ((unsigned long) info) { | |
| case (unsigned long) SEND_SIG_NOINFO: | |
| clear_siginfo(&q->info); | |
| q->info.si_signo = sig; | |
| q->info.si_errno = 0; | |
| q->info.si_code = SI_USER; | |
| q->info.si_pid = task_tgid_nr_ns(current, | |
| task_active_pid_ns(t)); | |
| rcu_read_lock(); | |
| q->info.si_uid = | |
| from_kuid_munged(task_cred_xxx(t, user_ns), | |
| current_uid()); | |
| rcu_read_unlock(); | |
| break; | |
| case (unsigned long) SEND_SIG_PRIV: | |
| clear_siginfo(&q->info); | |
| q->info.si_signo = sig; | |
| q->info.si_errno = 0; | |
| q->info.si_code = SI_KERNEL; | |
| q->info.si_pid = 0; | |
| q->info.si_uid = 0; | |
| break; | |
| default: | |
| copy_siginfo(&q->info, info); | |
| break; | |
| } | |
| } else if (!is_si_special(info) && | |
| sig >= SIGRTMIN && info->si_code != SI_USER) { | |
| /* | |
| * Queue overflow, abort. We may abort if the | |
| * signal was rt and sent by user using something | |
| * other than kill(). | |
| */ | |
| result = TRACE_SIGNAL_OVERFLOW_FAIL; | |
| ret = -EAGAIN; | |
| goto ret; | |
| } else { | |
| /* | |
| * This is a silent loss of information. We still | |
| * send the signal, but the *info bits are lost. | |
| */ | |
| result = TRACE_SIGNAL_LOSE_INFO; | |
| } | |
| out_set: | |
| signalfd_notify(t, sig); | |
| sigaddset(&pending->signal, sig); | |
| /* Let multiprocess signals appear after on-going forks */ | |
| if (type > PIDTYPE_TGID) { | |
| struct multiprocess_signals *delayed; | |
| hlist_for_each_entry(delayed, &t->signal->multiprocess, node) { | |
| sigset_t *signal = &delayed->signal; | |
| /* Can't queue both a stop and a continue signal */ | |
| if (sig == SIGCONT) | |
| sigdelsetmask(signal, SIG_KERNEL_STOP_MASK); | |
| else if (sig_kernel_stop(sig)) | |
| sigdelset(signal, SIGCONT); | |
| sigaddset(signal, sig); | |
| } | |
| } | |
| complete_signal(sig, t, type); | |
| ret: | |
| trace_signal_generate(sig, info, t, type != PIDTYPE_PID, result); | |
| return ret; | |
| } | |
| static inline bool has_si_pid_and_uid(struct kernel_siginfo *info) | |
| { | |
| bool ret = false; | |
| switch (siginfo_layout(info->si_signo, info->si_code)) { | |
| case SIL_KILL: | |
| case SIL_CHLD: | |
| case SIL_RT: | |
| ret = true; | |
| break; | |
| case SIL_TIMER: | |
| case SIL_POLL: | |
| case SIL_FAULT: | |
| case SIL_FAULT_TRAPNO: | |
| case SIL_FAULT_MCEERR: | |
| case SIL_FAULT_BNDERR: | |
| case SIL_FAULT_PKUERR: | |
| case SIL_FAULT_PERF_EVENT: | |
| case SIL_SYS: | |
| ret = false; | |
| break; | |
| } | |
| return ret; | |
| } | |
| int send_signal_locked(int sig, struct kernel_siginfo *info, | |
| struct task_struct *t, enum pid_type type) | |
| { | |
| struct kernel_siginfo __maybe_unused rewritten; | |
| /* Should SIGKILL or SIGSTOP be received by a pid namespace init? */ | |
| bool force = false; | |
| if (info == SEND_SIG_NOINFO) { | |
| /* Force if sent from an ancestor pid namespace */ | |
| force = !task_pid_nr_ns(current, task_active_pid_ns(t)); | |
| } else if (info == SEND_SIG_PRIV) { | |
| /* Don't ignore kernel generated signals */ | |
| force = true; | |
| } else if (has_si_pid_and_uid(info)) { | |
| /* SIGKILL and SIGSTOP is special or has ids */ | |
| #ifdef CONFIG_USER_NS | |
| struct user_namespace *t_user_ns; | |
| kuid_t uid; | |
| rcu_read_lock(); | |
| t_user_ns = task_cred_xxx(t, user_ns); | |
| if (current_user_ns() != t_user_ns) { | |
| rewritten = *info; | |
| info = &rewritten; | |
| uid = make_kuid(current_user_ns(), info->si_uid); | |
| rewritten.si_uid = from_kuid_munged(t_user_ns, uid); | |
| } | |
| rcu_read_unlock(); | |
| #endif | |
| /* A kernel generated signal? */ | |
| force = (info->si_code == SI_KERNEL); | |
| #ifdef CONFIG_PID_NS | |
| /* From an ancestor pid namespace? */ | |
| if (!task_pid_nr_ns(current, task_active_pid_ns(t))) { | |
| if (info != &rewritten) { | |
| rewritten = *info; | |
| info = &rewritten; | |
| } | |
| rewritten.si_pid = 0; | |
| force = true; | |
| } | |
| #endif | |
| } | |
| return __send_signal_locked(sig, info, t, type, force); | |
| } | |
| static void print_fatal_signal(int signr) | |
| { | |
| struct pt_regs *regs = task_pt_regs(current); | |
| struct file *exe_file; | |
| exe_file = get_task_exe_file(current); | |
| if (exe_file) { | |
| pr_info("%pD: %s: potentially unexpected fatal signal %d.\n", | |
| exe_file, current->comm, signr); | |
| fput(exe_file); | |
| } else { | |
| pr_info("%s: potentially unexpected fatal signal %d.\n", | |
| current->comm, signr); | |
| } | |
| #if defined(__i386__) && !defined(__arch_um__) | |
| pr_info("code at %08lx: ", regs->ip); | |
| { | |
| int i; | |
| for (i = 0; i < 16; i++) { | |
| unsigned char insn; | |
| if (get_user(insn, (unsigned char *)(regs->ip + i))) | |
| break; | |
| pr_cont("%02x ", insn); | |
| } | |
| } | |
| pr_cont("\n"); | |
| #endif | |
| preempt_disable(); | |
| show_regs(regs); | |
| preempt_enable(); | |
| } | |
| static int __init setup_print_fatal_signals(char *str) | |
| { | |
| get_option (&str, &print_fatal_signals); | |
| return 1; | |
| } | |
| __setup("print-fatal-signals=", setup_print_fatal_signals); | |
| int do_send_sig_info(int sig, struct kernel_siginfo *info, struct task_struct *p, | |
| enum pid_type type) | |
| { | |
| unsigned long flags; | |
| int ret = -ESRCH; | |
| if (lock_task_sighand(p, &flags)) { | |
| ret = send_signal_locked(sig, info, p, type); | |
| unlock_task_sighand(p, &flags); | |
| } | |
| return ret; | |
| } | |
| enum sig_handler { | |
| HANDLER_CURRENT, /* If reachable use the current handler */ | |
| HANDLER_SIG_DFL, /* Always use SIG_DFL handler semantics */ | |
| HANDLER_EXIT, /* Only visible as the process exit code */ | |
| }; | |
| /* | |
| * Force a signal that the process can't ignore: if necessary | |
| * we unblock the signal and change any SIG_IGN to SIG_DFL. | |
| * | |
| * Note: If we unblock the signal, we always reset it to SIG_DFL, | |
| * since we do not want to have a signal handler that was blocked | |
| * be invoked when user space had explicitly blocked it. | |
| * | |
| * We don't want to have recursive SIGSEGV's etc, for example, | |
| * that is why we also clear SIGNAL_UNKILLABLE. | |
| */ | |
| static int | |
| force_sig_info_to_task(struct kernel_siginfo *info, struct task_struct *t, | |
| enum sig_handler handler) | |
| { | |
| unsigned long int flags; | |
| int ret, blocked, ignored; | |
| struct k_sigaction *action; | |
| int sig = info->si_signo; | |
| spin_lock_irqsave(&t->sighand->siglock, flags); | |
| action = &t->sighand->action[sig-1]; | |
| ignored = action->sa.sa_handler == SIG_IGN; | |
| blocked = sigismember(&t->blocked, sig); | |
| if (blocked || ignored || (handler != HANDLER_CURRENT)) { | |
| action->sa.sa_handler = SIG_DFL; | |
| if (handler == HANDLER_EXIT) | |
| action->sa.sa_flags |= SA_IMMUTABLE; | |
| if (blocked) | |
| sigdelset(&t->blocked, sig); | |
| } | |
| /* | |
| * Don't clear SIGNAL_UNKILLABLE for traced tasks, users won't expect | |
| * debugging to leave init killable. But HANDLER_EXIT is always fatal. | |
| */ | |
| if (action->sa.sa_handler == SIG_DFL && | |
| (!t->ptrace || (handler == HANDLER_EXIT))) | |
| t->signal->flags &= ~SIGNAL_UNKILLABLE; | |
| ret = send_signal_locked(sig, info, t, PIDTYPE_PID); | |
| /* This can happen if the signal was already pending and blocked */ | |
| if (!task_sigpending(t)) | |
| signal_wake_up(t, 0); | |
| spin_unlock_irqrestore(&t->sighand->siglock, flags); | |
| return ret; | |
| } | |
| int force_sig_info(struct kernel_siginfo *info) | |
| { | |
| return force_sig_info_to_task(info, current, HANDLER_CURRENT); | |
| } | |
| /* | |
| * Nuke all other threads in the group. | |
| */ | |
| int zap_other_threads(struct task_struct *p) | |
| { | |
| struct task_struct *t; | |
| int count = 0; | |
| p->signal->group_stop_count = 0; | |
| task_clear_jobctl_pending(p, JOBCTL_PENDING_MASK); | |
| for_other_threads(p, t) { | |
| task_clear_jobctl_pending(t, JOBCTL_PENDING_MASK); | |
| count++; | |
| /* Don't bother with already dead threads */ | |
| if (t->exit_state) | |
| continue; | |
| sigaddset(&t->pending.signal, SIGKILL); | |
| signal_wake_up(t, 1); | |
| } | |
| return count; | |
| } | |
| struct sighand_struct *lock_task_sighand(struct task_struct *tsk, | |
| unsigned long *flags) | |
| { | |
| struct sighand_struct *sighand; | |
| rcu_read_lock(); | |
| for (;;) { | |
| sighand = rcu_dereference(tsk->sighand); | |
| if (unlikely(sighand == NULL)) { | |
| /* | |
| * Pairs with the smp_store_release() in | |
| * __exit_signal(). It ensures that all state | |
| * modifications to the task preceeding the store are | |
| * visible to the callers of lock_task_sighand(). | |
| */ | |
| smp_acquire__after_ctrl_dep(); | |
| break; | |
| } | |
| /* | |
| * This sighand can be already freed and even reused, but | |
| * we rely on SLAB_TYPESAFE_BY_RCU and sighand_ctor() which | |
| * initializes ->siglock: this slab can't go away, it has | |
| * the same object type, ->siglock can't be reinitialized. | |
| * | |
| * We need to ensure that tsk->sighand is still the same | |
| * after we take the lock, we can race with de_thread() or | |
| * __exit_signal(). In the latter case the next iteration | |
| * must see ->sighand == NULL. | |
| */ | |
| spin_lock_irqsave(&sighand->siglock, *flags); | |
| if (likely(sighand == rcu_access_pointer(tsk->sighand))) | |
| break; | |
| spin_unlock_irqrestore(&sighand->siglock, *flags); | |
| } | |
| rcu_read_unlock(); | |
| return sighand; | |
| } | |
| #ifdef CONFIG_LOCKDEP | |
| void lockdep_assert_task_sighand_held(struct task_struct *task) | |
| { | |
| struct sighand_struct *sighand; | |
| rcu_read_lock(); | |
| sighand = rcu_dereference(task->sighand); | |
| if (sighand) | |
| lockdep_assert_held(&sighand->siglock); | |
| else | |
| WARN_ON_ONCE(1); | |
| rcu_read_unlock(); | |
| } | |
| #endif | |
| /* | |
| * send signal info to all the members of a thread group or to the | |
| * individual thread if type == PIDTYPE_PID. | |
| */ | |
| int group_send_sig_info(int sig, struct kernel_siginfo *info, | |
| struct task_struct *p, enum pid_type type) | |
| { | |
| int ret; | |
| rcu_read_lock(); | |
| ret = check_kill_permission(sig, info, p); | |
| rcu_read_unlock(); | |
| if (!ret && sig) | |
| ret = do_send_sig_info(sig, info, p, type); | |
| return ret; | |
| } | |
| /* | |
| * __kill_pgrp_info() sends a signal to a process group: this is what the tty | |
| * control characters do (^C, ^Z etc) | |
| * - the caller must hold at least a readlock on tasklist_lock | |
| */ | |
| int __kill_pgrp_info(int sig, struct kernel_siginfo *info, struct pid *pgrp) | |
| { | |
| struct task_struct *p = NULL; | |
| int ret = -ESRCH; | |
| do_each_pid_task(pgrp, PIDTYPE_PGID, p) { | |
| int err = group_send_sig_info(sig, info, p, PIDTYPE_PGID); | |
| /* | |
| * If group_send_sig_info() succeeds at least once ret | |
| * becomes 0 and after that the code below has no effect. | |
| * Otherwise we return the last err or -ESRCH if this | |
| * process group is empty. | |
| */ | |
| if (ret) | |
| ret = err; | |
| } while_each_pid_task(pgrp, PIDTYPE_PGID, p); | |
| return ret; | |
| } | |
| static int kill_pid_info_type(int sig, struct kernel_siginfo *info, | |
| struct pid *pid, enum pid_type type) | |
| { | |
| int error = -ESRCH; | |
| struct task_struct *p; | |
| for (;;) { | |
| rcu_read_lock(); | |
| p = pid_task(pid, PIDTYPE_PID); | |
| if (p) | |
| error = group_send_sig_info(sig, info, p, type); | |
| rcu_read_unlock(); | |
| if (likely(!p || error != -ESRCH)) | |
| return error; | |
| /* | |
| * The task was unhashed in between, try again. If it | |
| * is dead, pid_task() will return NULL, if we race with | |
| * de_thread() it will find the new leader. | |
| */ | |
| } | |
| } | |
| int kill_pid_info(int sig, struct kernel_siginfo *info, struct pid *pid) | |
| { | |
| return kill_pid_info_type(sig, info, pid, PIDTYPE_TGID); | |
| } | |
| static int kill_proc_info(int sig, struct kernel_siginfo *info, pid_t pid) | |
| { | |
| int error; | |
| rcu_read_lock(); | |
| error = kill_pid_info(sig, info, find_vpid(pid)); | |
| rcu_read_unlock(); | |
| return error; | |
| } | |
| static inline bool kill_as_cred_perm(const struct cred *cred, | |
| struct task_struct *target) | |
| { | |
| const struct cred *pcred = __task_cred(target); | |
| return uid_eq(cred->euid, pcred->suid) || | |
| uid_eq(cred->euid, pcred->uid) || | |
| uid_eq(cred->uid, pcred->suid) || | |
| uid_eq(cred->uid, pcred->uid); | |
| } | |
| /* | |
| * The usb asyncio usage of siginfo is wrong. The glibc support | |
| * for asyncio which uses SI_ASYNCIO assumes the layout is SIL_RT. | |
| * AKA after the generic fields: | |
| * kernel_pid_t si_pid; | |
| * kernel_uid32_t si_uid; | |
| * sigval_t si_value; | |
| * | |
| * Unfortunately when usb generates SI_ASYNCIO it assumes the layout | |
| * after the generic fields is: | |
| * void __user *si_addr; | |
| * | |
| * This is a practical problem when there is a 64bit big endian kernel | |
| * and a 32bit userspace. As the 32bit address will encoded in the low | |
| * 32bits of the pointer. Those low 32bits will be stored at higher | |
| * address than appear in a 32 bit pointer. So userspace will not | |
| * see the address it was expecting for it's completions. | |
| * | |
| * There is nothing in the encoding that can allow | |
| * copy_siginfo_to_user32 to detect this confusion of formats, so | |
| * handle this by requiring the caller of kill_pid_usb_asyncio to | |
| * notice when this situration takes place and to store the 32bit | |
| * pointer in sival_int, instead of sival_addr of the sigval_t addr | |
| * parameter. | |
| */ | |
| int kill_pid_usb_asyncio(int sig, int errno, sigval_t addr, | |
| struct pid *pid, const struct cred *cred) | |
| { | |
| struct kernel_siginfo info; | |
| struct task_struct *p; | |
| unsigned long flags; | |
| int ret = -EINVAL; | |
| if (!valid_signal(sig)) | |
| return ret; | |
| clear_siginfo(&info); | |
| info.si_signo = sig; | |
| info.si_errno = errno; | |
| info.si_code = SI_ASYNCIO; | |
| *((sigval_t *)&info.si_pid) = addr; | |
| rcu_read_lock(); | |
| p = pid_task(pid, PIDTYPE_PID); | |
| if (!p) { | |
| ret = -ESRCH; | |
| goto out_unlock; | |
| } | |
| if (!kill_as_cred_perm(cred, p)) { | |
| ret = -EPERM; | |
| goto out_unlock; | |
| } | |
| ret = security_task_kill(p, &info, sig, cred); | |
| if (ret) | |
| goto out_unlock; | |
| if (sig) { | |
| if (lock_task_sighand(p, &flags)) { | |
| ret = __send_signal_locked(sig, &info, p, PIDTYPE_TGID, false); | |
| unlock_task_sighand(p, &flags); | |
| } else | |
| ret = -ESRCH; | |
| } | |
| out_unlock: | |
| rcu_read_unlock(); | |
| return ret; | |
| } | |
| EXPORT_SYMBOL_GPL(kill_pid_usb_asyncio); | |
| /* | |
| * kill_something_info() interprets pid in interesting ways just like kill(2). | |
| * | |
| * POSIX specifies that kill(-1,sig) is unspecified, but what we have | |
| * is probably wrong. Should make it like BSD or SYSV. | |
| */ | |
| static int kill_something_info(int sig, struct kernel_siginfo *info, pid_t pid) | |
| { | |
| int ret; | |
| if (pid > 0) | |
| return kill_proc_info(sig, info, pid); | |
| /* -INT_MIN is undefined. Exclude this case to avoid a UBSAN warning */ | |
| if (pid == INT_MIN) | |
| return -ESRCH; | |
| read_lock(&tasklist_lock); | |
| if (pid != -1) { | |
| ret = __kill_pgrp_info(sig, info, | |
| pid ? find_vpid(-pid) : task_pgrp(current)); | |
| } else { | |
| int retval = 0, count = 0; | |
| struct task_struct * p; | |
| for_each_process(p) { | |
| if (task_pid_vnr(p) > 1 && | |
| !same_thread_group(p, current)) { | |
| int err = group_send_sig_info(sig, info, p, | |
| PIDTYPE_MAX); | |
| ++count; | |
| if (err != -EPERM) | |
| retval = err; | |
| } | |
| } | |
| ret = count ? retval : -ESRCH; | |
| } | |
| read_unlock(&tasklist_lock); | |
| return ret; | |
| } | |
| /* | |
| * These are for backward compatibility with the rest of the kernel source. | |
| */ | |
| int send_sig_info(int sig, struct kernel_siginfo *info, struct task_struct *p) | |
| { | |
| /* | |
| * Make sure legacy kernel users don't send in bad values | |
| * (normal paths check this in check_kill_permission). | |
| */ | |
| if (!valid_signal(sig)) | |
| return -EINVAL; | |
| return do_send_sig_info(sig, info, p, PIDTYPE_PID); | |
| } | |
| EXPORT_SYMBOL(send_sig_info); | |
| #define __si_special(priv) \ | |
| ((priv) ? SEND_SIG_PRIV : SEND_SIG_NOINFO) | |
| int | |
| send_sig(int sig, struct task_struct *p, int priv) | |
| { | |
| return send_sig_info(sig, __si_special(priv), p); | |
| } | |
| EXPORT_SYMBOL(send_sig); | |
| void force_sig(int sig) | |
| { | |
| struct kernel_siginfo info; | |
| clear_siginfo(&info); | |
| info.si_signo = sig; | |
| info.si_errno = 0; | |
| info.si_code = SI_KERNEL; | |
| info.si_pid = 0; | |
| info.si_uid = 0; | |
| force_sig_info(&info); | |
| } | |
| EXPORT_SYMBOL(force_sig); | |
| void force_fatal_sig(int sig) | |
| { | |
| struct kernel_siginfo info; | |
| clear_siginfo(&info); | |
| info.si_signo = sig; | |
| info.si_errno = 0; | |
| info.si_code = SI_KERNEL; | |
| info.si_pid = 0; | |
| info.si_uid = 0; | |
| force_sig_info_to_task(&info, current, HANDLER_SIG_DFL); | |
| } | |
| void force_exit_sig(int sig) | |
| { | |
| struct kernel_siginfo info; | |
| clear_siginfo(&info); | |
| info.si_signo = sig; | |
| info.si_errno = 0; | |
| info.si_code = SI_KERNEL; | |
| info.si_pid = 0; | |
| info.si_uid = 0; | |
| force_sig_info_to_task(&info, current, HANDLER_EXIT); | |
| } | |
| /* | |
| * When things go south during signal handling, we | |
| * will force a SIGSEGV. And if the signal that caused | |
| * the problem was already a SIGSEGV, we'll want to | |
| * make sure we don't even try to deliver the signal.. | |
| */ | |
| void force_sigsegv(int sig) | |
| { | |
| if (sig == SIGSEGV) | |
| force_fatal_sig(SIGSEGV); | |
| else | |
| force_sig(SIGSEGV); | |
| } | |
| int force_sig_fault_to_task(int sig, int code, void __user *addr, | |
| struct task_struct *t) | |
| { | |
| struct kernel_siginfo info; | |
| clear_siginfo(&info); | |
| info.si_signo = sig; | |
| info.si_errno = 0; | |
| info.si_code = code; | |
| info.si_addr = addr; | |
| return force_sig_info_to_task(&info, t, HANDLER_CURRENT); | |
| } | |
| int force_sig_fault(int sig, int code, void __user *addr) | |
| { | |
| return force_sig_fault_to_task(sig, code, addr, current); | |
| } | |
| int send_sig_fault(int sig, int code, void __user *addr, struct task_struct *t) | |
| { | |
| struct kernel_siginfo info; | |
| clear_siginfo(&info); | |
| info.si_signo = sig; | |
| info.si_errno = 0; | |
| info.si_code = code; | |
| info.si_addr = addr; | |
| return send_sig_info(info.si_signo, &info, t); | |
| } | |
| int force_sig_mceerr(int code, void __user *addr, short lsb) | |
| { | |
| struct kernel_siginfo info; | |
| WARN_ON((code != BUS_MCEERR_AO) && (code != BUS_MCEERR_AR)); | |
| clear_siginfo(&info); | |
| info.si_signo = SIGBUS; | |
| info.si_errno = 0; | |
| info.si_code = code; | |
| info.si_addr = addr; | |
| info.si_addr_lsb = lsb; | |
| return force_sig_info(&info); | |
| } | |
| int send_sig_mceerr(int code, void __user *addr, short lsb, struct task_struct *t) | |
| { | |
| struct kernel_siginfo info; | |
| WARN_ON((code != BUS_MCEERR_AO) && (code != BUS_MCEERR_AR)); | |
| clear_siginfo(&info); | |
| info.si_signo = SIGBUS; | |
| info.si_errno = 0; | |
| info.si_code = code; | |
| info.si_addr = addr; | |
| info.si_addr_lsb = lsb; | |
| return send_sig_info(info.si_signo, &info, t); | |
| } | |
| EXPORT_SYMBOL(send_sig_mceerr); | |
| int force_sig_bnderr(void __user *addr, void __user *lower, void __user *upper) | |
| { | |
| struct kernel_siginfo info; | |
| clear_siginfo(&info); | |
| info.si_signo = SIGSEGV; | |
| info.si_errno = 0; | |
| info.si_code = SEGV_BNDERR; | |
| info.si_addr = addr; | |
| info.si_lower = lower; | |
| info.si_upper = upper; | |
| return force_sig_info(&info); | |
| } | |
| #ifdef SEGV_PKUERR | |
| int force_sig_pkuerr(void __user *addr, u32 pkey) | |
| { | |
| struct kernel_siginfo info; | |
| clear_siginfo(&info); | |
| info.si_signo = SIGSEGV; | |
| info.si_errno = 0; | |
| info.si_code = SEGV_PKUERR; | |
| info.si_addr = addr; | |
| info.si_pkey = pkey; | |
| return force_sig_info(&info); | |
| } | |
| #endif | |
| int send_sig_perf(void __user *addr, u32 type, u64 sig_data) | |
| { | |
| struct kernel_siginfo info; | |
| clear_siginfo(&info); | |
| info.si_signo = SIGTRAP; | |
| info.si_errno = 0; | |
| info.si_code = TRAP_PERF; | |
| info.si_addr = addr; | |
| info.si_perf_data = sig_data; | |
| info.si_perf_type = type; | |
| /* | |
| * Signals generated by perf events should not terminate the whole | |
| * process if SIGTRAP is blocked, however, delivering the signal | |
| * asynchronously is better than not delivering at all. But tell user | |
| * space if the signal was asynchronous, so it can clearly be | |
| * distinguished from normal synchronous ones. | |
| */ | |
| info.si_perf_flags = sigismember(¤t->blocked, info.si_signo) ? | |
| TRAP_PERF_FLAG_ASYNC : | |
| 0; | |
| return send_sig_info(info.si_signo, &info, current); | |
| } | |
| /** | |
| * force_sig_seccomp - signals the task to allow in-process syscall emulation | |
| * @syscall: syscall number to send to userland | |
| * @reason: filter-supplied reason code to send to userland (via si_errno) | |
| * @force_coredump: true to trigger a coredump | |
| * | |
| * Forces a SIGSYS with a code of SYS_SECCOMP and related sigsys info. | |
| */ | |
| int force_sig_seccomp(int syscall, int reason, bool force_coredump) | |
| { | |
| struct kernel_siginfo info; | |
| clear_siginfo(&info); | |
| info.si_signo = SIGSYS; | |
| info.si_code = SYS_SECCOMP; | |
| info.si_call_addr = (void __user *)KSTK_EIP(current); | |
| info.si_errno = reason; | |
| info.si_arch = syscall_get_arch(current); | |
| info.si_syscall = syscall; | |
| return force_sig_info_to_task(&info, current, | |
| force_coredump ? HANDLER_EXIT : HANDLER_CURRENT); | |
| } | |
| /* For the crazy architectures that include trap information in | |
| * the errno field, instead of an actual errno value. | |
| */ | |
| int force_sig_ptrace_errno_trap(int errno, void __user *addr) | |
| { | |
| struct kernel_siginfo info; | |
| clear_siginfo(&info); | |
| info.si_signo = SIGTRAP; | |
| info.si_errno = errno; | |
| info.si_code = TRAP_HWBKPT; | |
| info.si_addr = addr; | |
| return force_sig_info(&info); | |
| } | |
| /* For the rare architectures that include trap information using | |
| * si_trapno. | |
| */ | |
| int force_sig_fault_trapno(int sig, int code, void __user *addr, int trapno) | |
| { | |
| struct kernel_siginfo info; | |
| clear_siginfo(&info); | |
| info.si_signo = sig; | |
| info.si_errno = 0; | |
| info.si_code = code; | |
| info.si_addr = addr; | |
| info.si_trapno = trapno; | |
| return force_sig_info(&info); | |
| } | |
| /* For the rare architectures that include trap information using | |
| * si_trapno. | |
| */ | |
| int send_sig_fault_trapno(int sig, int code, void __user *addr, int trapno, | |
| struct task_struct *t) | |
| { | |
| struct kernel_siginfo info; | |
| clear_siginfo(&info); | |
| info.si_signo = sig; | |
| info.si_errno = 0; | |
| info.si_code = code; | |
| info.si_addr = addr; | |
| info.si_trapno = trapno; | |
| return send_sig_info(info.si_signo, &info, t); | |
| } | |
| static int kill_pgrp_info(int sig, struct kernel_siginfo *info, struct pid *pgrp) | |
| { | |
| int ret; | |
| read_lock(&tasklist_lock); | |
| ret = __kill_pgrp_info(sig, info, pgrp); | |
| read_unlock(&tasklist_lock); | |
| return ret; | |
| } | |
| int kill_pgrp(struct pid *pid, int sig, int priv) | |
| { | |
| return kill_pgrp_info(sig, __si_special(priv), pid); | |
| } | |
| EXPORT_SYMBOL(kill_pgrp); | |
| int kill_pid(struct pid *pid, int sig, int priv) | |
| { | |
| return kill_pid_info(sig, __si_special(priv), pid); | |
| } | |
| EXPORT_SYMBOL(kill_pid); | |
| int kill_cad_pid(int sig, int priv) | |
| { | |
| int ret; | |
| rcu_read_lock(); | |
| ret = kill_pid(rcu_dereference(cad_pid), sig, priv); | |
| rcu_read_unlock(); | |
| return ret; | |
| } | |
| EXPORT_SYMBOL(kill_cad_pid); | |
| #ifdef CONFIG_POSIX_TIMERS | |
| /* | |
| * These functions handle POSIX timer signals. POSIX timers use | |
| * preallocated sigqueue structs for sending signals. | |
| */ | |
| static void __flush_itimer_signals(struct sigpending *pending) | |
| { | |
| sigset_t signal, retain; | |
| struct sigqueue *q, *n; | |
| signal = pending->signal; | |
| sigemptyset(&retain); | |
| list_for_each_entry_safe(q, n, &pending->list, list) { | |
| int sig = q->info.si_signo; | |
| if (likely(q->info.si_code != SI_TIMER)) { | |
| sigaddset(&retain, sig); | |
| } else { | |
| sigdelset(&signal, sig); | |
| list_del_init(&q->list); | |
| __sigqueue_free(q); | |
| } | |
| } | |
| sigorsets(&pending->signal, &signal, &retain); | |
| } | |
| void flush_itimer_signals(void) | |
| { | |
| struct task_struct *tsk = current; | |
| guard(spinlock_irqsave)(&tsk->sighand->siglock); | |
| __flush_itimer_signals(&tsk->pending); | |
| __flush_itimer_signals(&tsk->signal->shared_pending); | |
| } | |
| bool posixtimer_init_sigqueue(struct sigqueue *q) | |
| { | |
| struct ucounts *ucounts = sig_get_ucounts(current, -1, 0); | |
| if (!ucounts) | |
| return false; | |
| clear_siginfo(&q->info); | |
| __sigqueue_init(q, ucounts, SIGQUEUE_PREALLOC); | |
| return true; | |
| } | |
| static void posixtimer_queue_sigqueue(struct sigqueue *q, struct task_struct *t, enum pid_type type) | |
| { | |
| struct sigpending *pending; | |
| int sig = q->info.si_signo; | |
| signalfd_notify(t, sig); | |
| pending = (type != PIDTYPE_PID) ? &t->signal->shared_pending : &t->pending; | |
| list_add_tail(&q->list, &pending->list); | |
| sigaddset(&pending->signal, sig); | |
| complete_signal(sig, t, type); | |
| } | |
| /* | |
| * This function is used by POSIX timers to deliver a timer signal. | |
| * Where type is PIDTYPE_PID (such as for timers with SIGEV_THREAD_ID | |
| * set), the signal must be delivered to the specific thread (queues | |
| * into t->pending). | |
| * | |
| * Where type is not PIDTYPE_PID, signals must be delivered to the | |
| * process. In this case, prefer to deliver to current if it is in | |
| * the same thread group as the target process and its sighand is | |
| * stable, which avoids unnecessarily waking up a potentially idle task. | |
| */ | |
| static inline struct task_struct *posixtimer_get_target(struct k_itimer *tmr) | |
| { | |
| struct task_struct *t = pid_task(tmr->it_pid, tmr->it_pid_type); | |
| if (t && tmr->it_pid_type != PIDTYPE_PID && | |
| same_thread_group(t, current) && !(current->flags & PF_EXITING)) | |
| t = current; | |
| return t; | |
| } | |
| /* | |
| * Find the target task for the POSIX timer signal and prevent that a | |
| * PIDTYPE_PID signal is queued on a task which has PF_EXITING set. | |
| */ | |
| static inline struct task_struct *posixtimer_get_unignore_target(struct k_itimer *tmr) | |
| { | |
| struct task_struct *t = posixtimer_get_target(tmr); | |
| if (t && task_can_queue_signal(t, tmr->it_pid_type)) | |
| return t; | |
| return NULL; | |
| } | |
| void posixtimer_send_sigqueue(struct k_itimer *tmr) | |
| { | |
| struct sigqueue *q = &tmr->sigq; | |
| int sig = q->info.si_signo; | |
| struct task_struct *t; | |
| unsigned long flags; | |
| int result; | |
| guard(rcu)(); | |
| t = posixtimer_get_target(tmr); | |
| if (!t) | |
| return; | |
| if (!likely(lock_task_sighand(t, &flags))) | |
| return; | |
| if (!task_can_queue_signal(t, tmr->it_pid_type)) | |
| goto unlock; | |
| /* | |
| * Update @tmr::sigqueue_seq for posix timer signals with sighand | |
| * locked to prevent a race against dequeue_signal(). | |
| */ | |
| tmr->it_sigqueue_seq = tmr->it_signal_seq; | |
| /* | |
| * Set the signal delivery status under sighand lock, so that the | |
| * ignored signal handling can distinguish between a periodic and a | |
| * non-periodic timer. | |
| */ | |
| tmr->it_sig_periodic = tmr->it_status == POSIX_TIMER_REQUEUE_PENDING; | |
| if (!prepare_signal(sig, t, false)) { | |
| result = TRACE_SIGNAL_IGNORED; | |
| if (!list_empty(&q->list)) { | |
| /* | |
| * The signal was ignored and blocked. The timer | |
| * expiry queued it because blocked signals are | |
| * queued independent of the ignored state. | |
| * | |
| * The unblocking set SIGPENDING, but the signal | |
| * was not yet dequeued from the pending list. | |
| * So prepare_signal() sees unblocked and ignored, | |
| * which ends up here. Leave it queued like a | |
| * regular signal. | |
| * | |
| * The same happens when the task group is exiting | |
| * and the signal is already queued. | |
| * prepare_signal() treats SIGNAL_GROUP_EXIT as | |
| * ignored independent of its queued state. This | |
| * gets cleaned up in __exit_signal(). | |
| */ | |
| goto out; | |
| } | |
| /* Periodic timers with SIG_IGN are queued on the ignored list */ | |
| if (tmr->it_sig_periodic) { | |
| /* | |
| * Already queued means the timer was rearmed after | |
| * the previous expiry got it on the ignore list. | |
| * Nothing to do for that case. | |
| */ | |
| if (hlist_unhashed(&tmr->ignored_list)) { | |
| /* | |
| * Take a signal reference and queue it on | |
| * the ignored list. | |
| */ | |
| posixtimer_sigqueue_getref(q); | |
| posixtimer_sig_ignore(t, q); | |
| } | |
| } else if (!hlist_unhashed(&tmr->ignored_list)) { | |
| /* | |
| * Covers the case where a timer was periodic and | |
| * then the signal was ignored. Later it was rearmed | |
| * as oneshot timer. The previous signal is invalid | |
| * now, and this oneshot signal has to be dropped. | |
| * Remove it from the ignored list and drop the | |
| * reference count as the signal is not longer | |
| * queued. | |
| */ | |
| hlist_del_init(&tmr->ignored_list); | |
| posixtimer_putref(tmr); | |
| } | |
| goto out; | |
| } | |
| if (unlikely(!list_empty(&q->list))) { | |
| /* This holds a reference count already */ | |
| result = TRACE_SIGNAL_ALREADY_PENDING; | |
| goto out; | |
| } | |
| /* | |
| * If the signal is on the ignore list, it got blocked after it was | |
| * ignored earlier. But nothing lifted the ignore. Move it back to | |
| * the pending list to be consistent with the regular signal | |
| * handling. This already holds a reference count. | |
| * | |
| * If it's not on the ignore list acquire a reference count. | |
| */ | |
| if (likely(hlist_unhashed(&tmr->ignored_list))) | |
| posixtimer_sigqueue_getref(q); | |
| else | |
| hlist_del_init(&tmr->ignored_list); | |
| posixtimer_queue_sigqueue(q, t, tmr->it_pid_type); | |
| result = TRACE_SIGNAL_DELIVERED; | |
| out: | |
| trace_signal_generate(sig, &q->info, t, tmr->it_pid_type != PIDTYPE_PID, result); | |
| unlock: | |
| unlock_task_sighand(t, &flags); | |
| } | |
| static inline void posixtimer_sig_ignore(struct task_struct *tsk, struct sigqueue *q) | |
| { | |
| struct k_itimer *tmr = container_of(q, struct k_itimer, sigq); | |
| /* | |
| * If the timer is marked deleted already or the signal originates | |
| * from a non-periodic timer, then just drop the reference | |
| * count. Otherwise queue it on the ignored list. | |
| */ | |
| if (posixtimer_valid(tmr) && tmr->it_sig_periodic) | |
| hlist_add_head(&tmr->ignored_list, &tsk->signal->ignored_posix_timers); | |
| else | |
| posixtimer_putref(tmr); | |
| } | |
| static void posixtimer_sig_unignore(struct task_struct *tsk, int sig) | |
| { | |
| struct hlist_head *head = &tsk->signal->ignored_posix_timers; | |
| struct hlist_node *tmp; | |
| struct k_itimer *tmr; | |
| if (likely(hlist_empty(head))) | |
| return; | |
| /* | |
| * Rearming a timer with sighand lock held is not possible due to | |
| * lock ordering vs. tmr::it_lock. Just stick the sigqueue back and | |
| * let the signal delivery path deal with it whether it needs to be | |
| * rearmed or not. This cannot be decided here w/o dropping sighand | |
| * lock and creating a loop retry horror show. | |
| */ | |
| hlist_for_each_entry_safe(tmr, tmp , head, ignored_list) { | |
| struct task_struct *target; | |
| /* | |
| * tmr::sigq.info.si_signo is immutable, so accessing it | |
| * without holding tmr::it_lock is safe. | |
| */ | |
| if (tmr->sigq.info.si_signo != sig) | |
| continue; | |
| hlist_del_init(&tmr->ignored_list); | |
| /* This should never happen and leaks a reference count */ | |
| if (WARN_ON_ONCE(!list_empty(&tmr->sigq.list))) | |
| continue; | |
| /* | |
| * Get the target for the signal. If target is a thread and | |
| * has exited by now, drop the reference count. | |
| */ | |
| guard(rcu)(); | |
| target = posixtimer_get_unignore_target(tmr); | |
| if (target) | |
| posixtimer_queue_sigqueue(&tmr->sigq, target, tmr->it_pid_type); | |
| else | |
| posixtimer_putref(tmr); | |
| } | |
| } | |
| #else /* CONFIG_POSIX_TIMERS */ | |
| static inline void posixtimer_sig_ignore(struct task_struct *tsk, struct sigqueue *q) { } | |
| static inline void posixtimer_sig_unignore(struct task_struct *tsk, int sig) { } | |
| #endif /* !CONFIG_POSIX_TIMERS */ | |
| void do_notify_pidfd(struct task_struct *task) | |
| { | |
| struct pid *pid = task_pid(task); | |
| WARN_ON(task->exit_state == 0); | |
| __wake_up(&pid->wait_pidfd, TASK_NORMAL, 0, | |
| poll_to_key(EPOLLIN | EPOLLRDNORM)); | |
| } | |
| /* | |
| * Let a parent know about the death of a child. | |
| * For a stopped/continued status change, use do_notify_parent_cldstop instead. | |
| * | |
| * Returns true if our parent ignored us and so we've switched to | |
| * self-reaping. | |
| */ | |
| bool do_notify_parent(struct task_struct *tsk, int sig) | |
| { | |
| struct kernel_siginfo info; | |
| unsigned long flags; | |
| struct sighand_struct *psig; | |
| bool autoreap = false; | |
| u64 utime, stime; | |
| if (WARN_ON_ONCE(!valid_signal(sig))) | |
| return false; | |
| /* do_notify_parent_cldstop should have been called instead. */ | |
| WARN_ON_ONCE(task_is_stopped_or_traced(tsk)); | |
| WARN_ON_ONCE(!tsk->ptrace && !thread_group_empty(tsk)); | |
| /* ptraced, or group-leader without sub-threads */ | |
| do_notify_pidfd(tsk); | |
| if (sig != SIGCHLD) { | |
| /* | |
| * This is only possible if parent == real_parent. | |
| * Check if it has changed security domain. | |
| */ | |
| if (tsk->parent_exec_id != READ_ONCE(tsk->parent->self_exec_id)) | |
| sig = SIGCHLD; | |
| } | |
| clear_siginfo(&info); | |
| info.si_signo = sig; | |
| info.si_errno = 0; | |
| /* | |
| * We are under tasklist_lock here so our parent is tied to | |
| * us and cannot change. | |
| * | |
| * task_active_pid_ns will always return the same pid namespace | |
| * until a task passes through release_task. | |
| * | |
| * write_lock() currently calls preempt_disable() which is the | |
| * same as rcu_read_lock(), but according to Oleg, this is not | |
| * correct to rely on this | |
| */ | |
| rcu_read_lock(); | |
| info.si_pid = task_pid_nr_ns(tsk, task_active_pid_ns(tsk->parent)); | |
| info.si_uid = from_kuid_munged(task_cred_xxx(tsk->parent, user_ns), | |
| task_uid(tsk)); | |
| rcu_read_unlock(); | |
| task_cputime(tsk, &utime, &stime); | |
| info.si_utime = nsec_to_clock_t(utime + tsk->signal->utime); | |
| info.si_stime = nsec_to_clock_t(stime + tsk->signal->stime); | |
| info.si_status = tsk->exit_code & 0x7f; | |
| if (tsk->exit_code & 0x80) | |
| info.si_code = CLD_DUMPED; | |
| else if (tsk->exit_code & 0x7f) | |
| info.si_code = CLD_KILLED; | |
| else { | |
| info.si_code = CLD_EXITED; | |
| info.si_status = tsk->exit_code >> 8; | |
| } | |
| psig = tsk->parent->sighand; | |
| spin_lock_irqsave(&psig->siglock, flags); | |
| if (!tsk->ptrace && sig == SIGCHLD && | |
| (psig->action[SIGCHLD-1].sa.sa_handler == SIG_IGN || | |
| (psig->action[SIGCHLD-1].sa.sa_flags & SA_NOCLDWAIT))) { | |
| /* | |
| * We are exiting and our parent doesn't care. POSIX.1 | |
| * defines special semantics for setting SIGCHLD to SIG_IGN | |
| * or setting the SA_NOCLDWAIT flag: we should be reaped | |
| * automatically and not left for our parent's wait4 call. | |
| * Rather than having the parent do it as a magic kind of | |
| * signal handler, we just set this to tell do_exit that we | |
| * can be cleaned up without becoming a zombie. Note that | |
| * we still call __wake_up_parent in this case, because a | |
| * blocked sys_wait4 might now return -ECHILD. | |
| * | |
| * Whether we send SIGCHLD or not for SA_NOCLDWAIT | |
| * is implementation-defined: we do (if you don't want | |
| * it, just use SIG_IGN instead). | |
| */ | |
| autoreap = true; | |
| if (psig->action[SIGCHLD-1].sa.sa_handler == SIG_IGN) | |
| sig = 0; | |
| } | |
| if (!tsk->ptrace && tsk->signal->autoreap) { | |
| autoreap = true; | |
| sig = 0; | |
| } | |
| /* | |
| * Send with __send_signal as si_pid and si_uid are in the | |
| * parent's namespaces. | |
| */ | |
| if (sig) | |
| __send_signal_locked(sig, &info, tsk->parent, PIDTYPE_TGID, false); | |
| __wake_up_parent(tsk, tsk->parent); | |
| spin_unlock_irqrestore(&psig->siglock, flags); | |
| return autoreap; | |
| } | |
| /** | |
| * do_notify_parent_cldstop - notify parent of stopped/continued state change | |
| * @tsk: task reporting the state change | |
| * @for_ptracer: the notification is for ptracer | |
| * @why: CLD_{CONTINUED|STOPPED|TRAPPED} to report | |
| * | |
| * Notify @tsk's parent that the stopped/continued state has changed. If | |
| * @for_ptracer is %false, @tsk's group leader notifies to its real parent. | |
| * If %true, @tsk reports to @tsk->parent which should be the ptracer. | |
| * | |
| * CONTEXT: | |
| * Must be called with tasklist_lock at least read locked. | |
| */ | |
| static void do_notify_parent_cldstop(struct task_struct *tsk, | |
| bool for_ptracer, int why) | |
| { | |
| struct kernel_siginfo info; | |
| unsigned long flags; | |
| struct task_struct *parent; | |
| struct sighand_struct *sighand; | |
| u64 utime, stime; | |
| if (for_ptracer) { | |
| parent = tsk->parent; | |
| } else { | |
| tsk = tsk->group_leader; | |
| parent = tsk->real_parent; | |
| } | |
| clear_siginfo(&info); | |
| info.si_signo = SIGCHLD; | |
| info.si_errno = 0; | |
| /* | |
| * see comment in do_notify_parent() about the following 4 lines | |
| */ | |
| rcu_read_lock(); | |
| info.si_pid = task_pid_nr_ns(tsk, task_active_pid_ns(parent)); | |
| info.si_uid = from_kuid_munged(task_cred_xxx(parent, user_ns), task_uid(tsk)); | |
| rcu_read_unlock(); | |
| task_cputime(tsk, &utime, &stime); | |
| info.si_utime = nsec_to_clock_t(utime); | |
| info.si_stime = nsec_to_clock_t(stime); | |
| info.si_code = why; | |
| switch (why) { | |
| case CLD_CONTINUED: | |
| info.si_status = SIGCONT; | |
| break; | |
| case CLD_STOPPED: | |
| info.si_status = tsk->signal->group_exit_code & 0x7f; | |
| break; | |
| case CLD_TRAPPED: | |
| info.si_status = tsk->exit_code & 0x7f; | |
| break; | |
| default: | |
| BUG(); | |
| } | |
| sighand = parent->sighand; | |
| spin_lock_irqsave(&sighand->siglock, flags); | |
| if (sighand->action[SIGCHLD-1].sa.sa_handler != SIG_IGN && | |
| !(sighand->action[SIGCHLD-1].sa.sa_flags & SA_NOCLDSTOP)) | |
| send_signal_locked(SIGCHLD, &info, parent, PIDTYPE_TGID); | |
| /* | |
| * Even if SIGCHLD is not generated, we must wake up wait4 calls. | |
| */ | |
| __wake_up_parent(tsk, parent); | |
| spin_unlock_irqrestore(&sighand->siglock, flags); | |
| } | |
| /* | |
| * This must be called with current->sighand->siglock held. | |
| * | |
| * This should be the path for all ptrace stops. | |
| * We always set current->last_siginfo while stopped here. | |
| * That makes it a way to test a stopped process for | |
| * being ptrace-stopped vs being job-control-stopped. | |
| * | |
| * Returns the signal the ptracer requested the code resume | |
| * with. If the code did not stop because the tracer is gone, | |
| * the stop signal remains unchanged unless clear_code. | |
| */ | |
| static int ptrace_stop(int exit_code, int why, unsigned long message, | |
| kernel_siginfo_t *info) | |
| __releases(¤t->sighand->siglock) | |
| __acquires(¤t->sighand->siglock) | |
| { | |
| bool gstop_done = false; | |
| if (arch_ptrace_stop_needed()) { | |
| /* | |
| * The arch code has something special to do before a | |
| * ptrace stop. This is allowed to block, e.g. for faults | |
| * on user stack pages. We can't keep the siglock while | |
| * calling arch_ptrace_stop, so we must release it now. | |
| * To preserve proper semantics, we must do this before | |
| * any signal bookkeeping like checking group_stop_count. | |
| */ | |
| spin_unlock_irq(¤t->sighand->siglock); | |
| arch_ptrace_stop(); | |
| spin_lock_irq(¤t->sighand->siglock); | |
| } | |
| /* | |
| * After this point ptrace_signal_wake_up or signal_wake_up | |
| * will clear TASK_TRACED if ptrace_unlink happens or a fatal | |
| * signal comes in. Handle previous ptrace_unlinks and fatal | |
| * signals here to prevent ptrace_stop sleeping in schedule. | |
| */ | |
| if (!current->ptrace || __fatal_signal_pending(current)) | |
| return exit_code; | |
| set_special_state(TASK_TRACED); | |
| current->jobctl |= JOBCTL_TRACED; | |
| /* | |
| * We're committing to trapping. TRACED should be visible before | |
| * TRAPPING is cleared; otherwise, the tracer might fail do_wait(). | |
| * Also, transition to TRACED and updates to ->jobctl should be | |
| * atomic with respect to siglock and should be done after the arch | |
| * hook as siglock is released and regrabbed across it. | |
| * | |
| * TRACER TRACEE | |
| * | |
| * ptrace_attach() | |
| * [L] wait_on_bit(JOBCTL_TRAPPING) [S] set_special_state(TRACED) | |
| * do_wait() | |
| * set_current_state() smp_wmb(); | |
| * ptrace_do_wait() | |
| * wait_task_stopped() | |
| * task_stopped_code() | |
| * [L] task_is_traced() [S] task_clear_jobctl_trapping(); | |
| */ | |
| smp_wmb(); | |
| current->ptrace_message = message; | |
| current->last_siginfo = info; | |
| current->exit_code = exit_code; | |
| /* | |
| * If @why is CLD_STOPPED, we're trapping to participate in a group | |
| * stop. Do the bookkeeping. Note that if SIGCONT was delievered | |
| * across siglock relocks since INTERRUPT was scheduled, PENDING | |
| * could be clear now. We act as if SIGCONT is received after | |
| * TASK_TRACED is entered - ignore it. | |
| */ | |
| if (why == CLD_STOPPED && (current->jobctl & JOBCTL_STOP_PENDING)) | |
| gstop_done = task_participate_group_stop(current); | |
| /* any trap clears pending STOP trap, STOP trap clears NOTIFY */ | |
| task_clear_jobctl_pending(current, JOBCTL_TRAP_STOP); | |
| if (info && info->si_code >> 8 == PTRACE_EVENT_STOP) | |
| task_clear_jobctl_pending(current, JOBCTL_TRAP_NOTIFY); | |
| /* entering a trap, clear TRAPPING */ | |
| task_clear_jobctl_trapping(current); | |
| spin_unlock_irq(¤t->sighand->siglock); | |
| read_lock(&tasklist_lock); | |
| /* | |
| * Notify parents of the stop. | |
| * | |
| * While ptraced, there are two parents - the ptracer and | |
| * the real_parent of the group_leader. The ptracer should | |
| * know about every stop while the real parent is only | |
| * interested in the completion of group stop. The states | |
| * for the two don't interact with each other. Notify | |
| * separately unless they're gonna be duplicates. | |
| */ | |
| if (current->ptrace) | |
| do_notify_parent_cldstop(current, true, why); | |
| if (gstop_done && (!current->ptrace || ptrace_reparented(current))) | |
| do_notify_parent_cldstop(current, false, why); | |
| /* | |
| * The previous do_notify_parent_cldstop() invocation woke ptracer. | |
| * One a PREEMPTION kernel this can result in preemption requirement | |
| * which will be fulfilled after read_unlock() and the ptracer will be | |
| * put on the CPU. | |
| * The ptracer is in wait_task_inactive(, __TASK_TRACED) waiting for | |
| * this task wait in schedule(). If this task gets preempted then it | |
| * remains enqueued on the runqueue. The ptracer will observe this and | |
| * then sleep for a delay of one HZ tick. In the meantime this task | |
| * gets scheduled, enters schedule() and will wait for the ptracer. | |
| * | |
| * This preemption point is not bad from a correctness point of | |
| * view but extends the runtime by one HZ tick time due to the | |
| * ptracer's sleep. The preempt-disable section ensures that there | |
| * will be no preemption between unlock and schedule() and so | |
| * improving the performance since the ptracer will observe that | |
| * the tracee is scheduled out once it gets on the CPU. | |
| * | |
| * On PREEMPT_RT locking tasklist_lock does not disable preemption. | |
| * Therefore the task can be preempted after do_notify_parent_cldstop() | |
| * before unlocking tasklist_lock so there is no benefit in doing this. | |
| * | |
| * In fact disabling preemption is harmful on PREEMPT_RT because | |
| * the spinlock_t in cgroup_enter_frozen() must not be acquired | |
| * with preemption disabled due to the 'sleeping' spinlock | |
| * substitution of RT. | |
| */ | |
| if (!IS_ENABLED(CONFIG_PREEMPT_RT)) | |
| preempt_disable(); | |
| read_unlock(&tasklist_lock); | |
| cgroup_enter_frozen(); | |
| if (!IS_ENABLED(CONFIG_PREEMPT_RT)) | |
| preempt_enable_no_resched(); | |
| schedule(); | |
| cgroup_leave_frozen(true); | |
| /* | |
| * We are back. Now reacquire the siglock before touching | |
| * last_siginfo, so that we are sure to have synchronized with | |
| * any signal-sending on another CPU that wants to examine it. | |
| */ | |
| spin_lock_irq(¤t->sighand->siglock); | |
| exit_code = current->exit_code; | |
| current->last_siginfo = NULL; | |
| current->ptrace_message = 0; | |
| current->exit_code = 0; | |
| /* LISTENING can be set only during STOP traps, clear it */ | |
| current->jobctl &= ~(JOBCTL_LISTENING | JOBCTL_PTRACE_FROZEN); | |
| /* | |
| * Queued signals ignored us while we were stopped for tracing. | |
| * So check for any that we should take before resuming user mode. | |
| * This sets TIF_SIGPENDING, but never clears it. | |
| */ | |
| recalc_sigpending_tsk(current); | |
| return exit_code; | |
| } | |
| static int ptrace_do_notify(int signr, int exit_code, int why, unsigned long message) | |
| { | |
| kernel_siginfo_t info; | |
| clear_siginfo(&info); | |
| info.si_signo = signr; | |
| info.si_code = exit_code; | |
| info.si_pid = task_pid_vnr(current); | |
| info.si_uid = from_kuid_munged(current_user_ns(), current_uid()); | |
| /* Let the debugger run. */ | |
| return ptrace_stop(exit_code, why, message, &info); | |
| } | |
| int ptrace_notify(int exit_code, unsigned long message) | |
| { | |
| int signr; | |
| BUG_ON((exit_code & (0x7f | ~0xffff)) != SIGTRAP); | |
| if (unlikely(task_work_pending(current))) | |
| task_work_run(); | |
| spin_lock_irq(¤t->sighand->siglock); | |
| signr = ptrace_do_notify(SIGTRAP, exit_code, CLD_TRAPPED, message); | |
| spin_unlock_irq(¤t->sighand->siglock); | |
| return signr; | |
| } | |
| /** | |
| * do_signal_stop - handle group stop for SIGSTOP and other stop signals | |
| * @signr: signr causing group stop if initiating | |
| * | |
| * If %JOBCTL_STOP_PENDING is not set yet, initiate group stop with @signr | |
| * and participate in it. If already set, participate in the existing | |
| * group stop. If participated in a group stop (and thus slept), %true is | |
| * returned with siglock released. | |
| * | |
| * If ptraced, this function doesn't handle stop itself. Instead, | |
| * %JOBCTL_TRAP_STOP is scheduled and %false is returned with siglock | |
| * untouched. The caller must ensure that INTERRUPT trap handling takes | |
| * places afterwards. | |
| * | |
| * CONTEXT: | |
| * Must be called with @current->sighand->siglock held, which is released | |
| * on %true return. | |
| * | |
| * RETURNS: | |
| * %false if group stop is already cancelled or ptrace trap is scheduled. | |
| * %true if participated in group stop. | |
| */ | |
| static bool do_signal_stop(int signr) | |
| __releases(¤t->sighand->siglock) | |
| { | |
| struct signal_struct *sig = current->signal; | |
| if (!(current->jobctl & JOBCTL_STOP_PENDING)) { | |
| unsigned long gstop = JOBCTL_STOP_PENDING | JOBCTL_STOP_CONSUME; | |
| struct task_struct *t; | |
| /* signr will be recorded in task->jobctl for retries */ | |
| WARN_ON_ONCE(signr & ~JOBCTL_STOP_SIGMASK); | |
| if (!likely(current->jobctl & JOBCTL_STOP_DEQUEUED) || | |
| unlikely(sig->flags & SIGNAL_GROUP_EXIT) || | |
| unlikely(sig->group_exec_task)) | |
| return false; | |
| /* | |
| * There is no group stop already in progress. We must | |
| * initiate one now. | |
| * | |
| * While ptraced, a task may be resumed while group stop is | |
| * still in effect and then receive a stop signal and | |
| * initiate another group stop. This deviates from the | |
| * usual behavior as two consecutive stop signals can't | |
| * cause two group stops when !ptraced. That is why we | |
| * also check !task_is_stopped(t) below. | |
| * | |
| * The condition can be distinguished by testing whether | |
| * SIGNAL_STOP_STOPPED is already set. Don't generate | |
| * group_exit_code in such case. | |
| * | |
| * This is not necessary for SIGNAL_STOP_CONTINUED because | |
| * an intervening stop signal is required to cause two | |
| * continued events regardless of ptrace. | |
| */ | |
| if (!(sig->flags & SIGNAL_STOP_STOPPED)) | |
| sig->group_exit_code = signr; | |
| sig->group_stop_count = 0; | |
| if (task_set_jobctl_pending(current, signr | gstop)) | |
| sig->group_stop_count++; | |
| for_other_threads(current, t) { | |
| /* | |
| * Setting state to TASK_STOPPED for a group | |
| * stop is always done with the siglock held, | |
| * so this check has no races. | |
| */ | |
| if (!task_is_stopped(t) && | |
| task_set_jobctl_pending(t, signr | gstop)) { | |
| sig->group_stop_count++; | |
| if (likely(!(t->ptrace & PT_SEIZED))) | |
| signal_wake_up(t, 0); | |
| else | |
| ptrace_trap_notify(t); | |
| } | |
| } | |
| } | |
| if (likely(!current->ptrace)) { | |
| int notify = 0; | |
| /* | |
| * If there are no other threads in the group, or if there | |
| * is a group stop in progress and we are the last to stop, | |
| * report to the parent. | |
| */ | |
| if (task_participate_group_stop(current)) | |
| notify = CLD_STOPPED; | |
| current->jobctl |= JOBCTL_STOPPED; | |
| set_special_state(TASK_STOPPED); | |
| spin_unlock_irq(¤t->sighand->siglock); | |
| /* | |
| * Notify the parent of the group stop completion. Because | |
| * we're not holding either the siglock or tasklist_lock | |
| * here, ptracer may attach inbetween; however, this is for | |
| * group stop and should always be delivered to the real | |
| * parent of the group leader. The new ptracer will get | |
| * its notification when this task transitions into | |
| * TASK_TRACED. | |
| */ | |
| if (notify) { | |
| read_lock(&tasklist_lock); | |
| do_notify_parent_cldstop(current, false, notify); | |
| read_unlock(&tasklist_lock); | |
| } | |
| /* Now we don't run again until woken by SIGCONT or SIGKILL */ | |
| cgroup_enter_frozen(); | |
| schedule(); | |
| return true; | |
| } else { | |
| /* | |
| * While ptraced, group stop is handled by STOP trap. | |
| * Schedule it and let the caller deal with it. | |
| */ | |
| task_set_jobctl_pending(current, JOBCTL_TRAP_STOP); | |
| return false; | |
| } | |
| } | |
| /** | |
| * do_jobctl_trap - take care of ptrace jobctl traps | |
| * | |
| * When PT_SEIZED, it's used for both group stop and explicit | |
| * SEIZE/INTERRUPT traps. Both generate PTRACE_EVENT_STOP trap with | |
| * accompanying siginfo. If stopped, lower eight bits of exit_code contain | |
| * the stop signal; otherwise, %SIGTRAP. | |
| * | |
| * When !PT_SEIZED, it's used only for group stop trap with stop signal | |
| * number as exit_code and no siginfo. | |
| * | |
| * CONTEXT: | |
| * Must be called with @current->sighand->siglock held, which may be | |
| * released and re-acquired before returning with intervening sleep. | |
| */ | |
| static void do_jobctl_trap(void) | |
| { | |
| struct signal_struct *signal = current->signal; | |
| int signr = current->jobctl & JOBCTL_STOP_SIGMASK; | |
| if (current->ptrace & PT_SEIZED) { | |
| if (!signal->group_stop_count && | |
| !(signal->flags & SIGNAL_STOP_STOPPED)) | |
| signr = SIGTRAP; | |
| WARN_ON_ONCE(!signr); | |
| ptrace_do_notify(signr, signr | (PTRACE_EVENT_STOP << 8), | |
| CLD_STOPPED, 0); | |
| } else { | |
| WARN_ON_ONCE(!signr); | |
| ptrace_stop(signr, CLD_STOPPED, 0, NULL); | |
| } | |
| } | |
| /** | |
| * do_freezer_trap - handle the freezer jobctl trap | |
| * | |
| * Puts the task into frozen state, if only the task is not about to quit. | |
| * In this case it drops JOBCTL_TRAP_FREEZE. | |
| * | |
| * CONTEXT: | |
| * Must be called with @current->sighand->siglock held, | |
| * which is always released before returning. | |
| */ | |
| static void do_freezer_trap(void) | |
| __releases(¤t->sighand->siglock) | |
| { | |
| /* | |
| * If there are other trap bits pending except JOBCTL_TRAP_FREEZE, | |
| * let's make another loop to give it a chance to be handled. | |
| * In any case, we'll return back. | |
| */ | |
| if ((current->jobctl & (JOBCTL_PENDING_MASK | JOBCTL_TRAP_FREEZE)) != | |
| JOBCTL_TRAP_FREEZE) { | |
| spin_unlock_irq(¤t->sighand->siglock); | |
| return; | |
| } | |
| /* | |
| * Now we're sure that there is no pending fatal signal and no | |
| * pending traps. Clear TIF_SIGPENDING to not get out of schedule() | |
| * immediately (if there is a non-fatal signal pending), and | |
| * put the task into sleep. | |
| */ | |
| __set_current_state(TASK_INTERRUPTIBLE|TASK_FREEZABLE); | |
| clear_thread_flag(TIF_SIGPENDING); | |
| spin_unlock_irq(¤t->sighand->siglock); | |
| cgroup_enter_frozen(); | |
| schedule(); | |
| /* | |
| * We could've been woken by task_work, run it to clear | |
| * TIF_NOTIFY_SIGNAL. The caller will retry if necessary. | |
| */ | |
| clear_notify_signal(); | |
| if (unlikely(task_work_pending(current))) | |
| task_work_run(); | |
| } | |
| static int ptrace_signal(int signr, kernel_siginfo_t *info, enum pid_type type) | |
| { | |
| /* | |
| * We do not check sig_kernel_stop(signr) but set this marker | |
| * unconditionally because we do not know whether debugger will | |
| * change signr. This flag has no meaning unless we are going | |
| * to stop after return from ptrace_stop(). In this case it will | |
| * be checked in do_signal_stop(), we should only stop if it was | |
| * not cleared by SIGCONT while we were sleeping. See also the | |
| * comment in dequeue_signal(). | |
| */ | |
| current->jobctl |= JOBCTL_STOP_DEQUEUED; | |
| signr = ptrace_stop(signr, CLD_TRAPPED, 0, info); | |
| /* We're back. Did the debugger cancel the sig? */ | |
| if (signr == 0) | |
| return signr; | |
| /* | |
| * Update the siginfo structure if the signal has | |
| * changed. If the debugger wanted something | |
| * specific in the siginfo structure then it should | |
| * have updated *info via PTRACE_SETSIGINFO. | |
| */ | |
| if (signr != info->si_signo) { | |
| clear_siginfo(info); | |
| info->si_signo = signr; | |
| info->si_errno = 0; | |
| info->si_code = SI_USER; | |
| rcu_read_lock(); | |
| info->si_pid = task_pid_vnr(current->parent); | |
| info->si_uid = from_kuid_munged(current_user_ns(), | |
| task_uid(current->parent)); | |
| rcu_read_unlock(); | |
| } | |
| /* If the (new) signal is now blocked, requeue it. */ | |
| if (sigismember(¤t->blocked, signr) || | |
| fatal_signal_pending(current)) { | |
| send_signal_locked(signr, info, current, type); | |
| signr = 0; | |
| } | |
| return signr; | |
| } | |
| static void hide_si_addr_tag_bits(struct ksignal *ksig) | |
| { | |
| switch (siginfo_layout(ksig->sig, ksig->info.si_code)) { | |
| case SIL_FAULT: | |
| case SIL_FAULT_TRAPNO: | |
| case SIL_FAULT_MCEERR: | |
| case SIL_FAULT_BNDERR: | |
| case SIL_FAULT_PKUERR: | |
| case SIL_FAULT_PERF_EVENT: | |
| ksig->info.si_addr = arch_untagged_si_addr( | |
| ksig->info.si_addr, ksig->sig, ksig->info.si_code); | |
| break; | |
| case SIL_KILL: | |
| case SIL_TIMER: | |
| case SIL_POLL: | |
| case SIL_CHLD: | |
| case SIL_RT: | |
| case SIL_SYS: | |
| break; | |
| } | |
| } | |
| bool get_signal(struct ksignal *ksig) | |
| { | |
| struct sighand_struct *sighand = current->sighand; | |
| struct signal_struct *signal = current->signal; | |
| int signr; | |
| clear_notify_signal(); | |
| if (unlikely(task_work_pending(current))) | |
| task_work_run(); | |
| if (!task_sigpending(current)) | |
| return false; | |
| if (unlikely(uprobe_deny_signal())) | |
| return false; | |
| /* | |
| * Do this once, we can't return to user-mode if freezing() == T. | |
| * do_signal_stop() and ptrace_stop() set TASK_STOPPED/TASK_TRACED | |
| * and the freezer handles those states via TASK_FROZEN, thus they | |
| * do not need another check after return. | |
| */ | |
| try_to_freeze(); | |
| relock: | |
| spin_lock_irq(&sighand->siglock); | |
| /* | |
| * Every stopped thread goes here after wakeup. Check to see if | |
| * we should notify the parent, prepare_signal(SIGCONT) encodes | |
| * the CLD_ si_code into SIGNAL_CLD_MASK bits. | |
| */ | |
| if (unlikely(signal->flags & SIGNAL_CLD_MASK)) { | |
| int why; | |
| if (signal->flags & SIGNAL_CLD_CONTINUED) | |
| why = CLD_CONTINUED; | |
| else | |
| why = CLD_STOPPED; | |
| signal->flags &= ~SIGNAL_CLD_MASK; | |
| spin_unlock_irq(&sighand->siglock); | |
| /* | |
| * Notify the parent that we're continuing. This event is | |
| * always per-process and doesn't make whole lot of sense | |
| * for ptracers, who shouldn't consume the state via | |
| * wait(2) either, but, for backward compatibility, notify | |
| * the ptracer of the group leader too unless it's gonna be | |
| * a duplicate. | |
| */ | |
| read_lock(&tasklist_lock); | |
| do_notify_parent_cldstop(current, false, why); | |
| if (ptrace_reparented(current->group_leader)) | |
| do_notify_parent_cldstop(current->group_leader, | |
| true, why); | |
| read_unlock(&tasklist_lock); | |
| goto relock; | |
| } | |
| for (;;) { | |
| struct k_sigaction *ka; | |
| enum pid_type type; | |
| /* Has this task already been marked for death? */ | |
| if ((signal->flags & SIGNAL_GROUP_EXIT) || | |
| signal->group_exec_task) { | |
| signr = SIGKILL; | |
| sigdelset(¤t->pending.signal, SIGKILL); | |
| trace_signal_deliver(SIGKILL, SEND_SIG_NOINFO, | |
| &sighand->action[SIGKILL-1]); | |
| recalc_sigpending(); | |
| /* | |
| * implies do_group_exit() or return to PF_USER_WORKER, | |
| * no need to initialize ksig->info/etc. | |
| */ | |
| goto fatal; | |
| } | |
| if (unlikely(current->jobctl & JOBCTL_STOP_PENDING) && | |
| do_signal_stop(0)) | |
| goto relock; | |
| if (unlikely(current->jobctl & | |
| (JOBCTL_TRAP_MASK | JOBCTL_TRAP_FREEZE))) { | |
| if (current->jobctl & JOBCTL_TRAP_MASK) { | |
| do_jobctl_trap(); | |
| spin_unlock_irq(&sighand->siglock); | |
| } else if (current->jobctl & JOBCTL_TRAP_FREEZE) | |
| do_freezer_trap(); | |
| goto relock; | |
| } | |
| /* | |
| * If the task is leaving the frozen state, let's update | |
| * cgroup counters and reset the frozen bit. | |
| */ | |
| if (unlikely(cgroup_task_frozen(current))) { | |
| spin_unlock_irq(&sighand->siglock); | |
| cgroup_leave_frozen(false); | |
| goto relock; | |
| } | |
| /* | |
| * Signals generated by the execution of an instruction | |
| * need to be delivered before any other pending signals | |
| * so that the instruction pointer in the signal stack | |
| * frame points to the faulting instruction. | |
| */ | |
| type = PIDTYPE_PID; | |
| signr = dequeue_synchronous_signal(&ksig->info); | |
| if (!signr) | |
| signr = dequeue_signal(¤t->blocked, &ksig->info, &type); | |
| if (!signr) | |
| break; /* will return 0 */ | |
| if (unlikely(current->ptrace) && (signr != SIGKILL) && | |
| !(sighand->action[signr -1].sa.sa_flags & SA_IMMUTABLE)) { | |
| signr = ptrace_signal(signr, &ksig->info, type); | |
| if (!signr) | |
| continue; | |
| } | |
| ka = &sighand->action[signr-1]; | |
| /* Trace actually delivered signals. */ | |
| trace_signal_deliver(signr, &ksig->info, ka); | |
| if (ka->sa.sa_handler == SIG_IGN) /* Do nothing. */ | |
| continue; | |
| if (ka->sa.sa_handler != SIG_DFL) { | |
| /* Run the handler. */ | |
| ksig->ka = *ka; | |
| if (ka->sa.sa_flags & SA_ONESHOT) | |
| ka->sa.sa_handler = SIG_DFL; | |
| break; /* will return non-zero "signr" value */ | |
| } | |
| /* | |
| * Now we are doing the default action for this signal. | |
| */ | |
| if (sig_kernel_ignore(signr)) /* Default is nothing. */ | |
| continue; | |
| /* | |
| * Global init gets no signals it doesn't want. | |
| * Container-init gets no signals it doesn't want from same | |
| * container. | |
| * | |
| * Note that if global/container-init sees a sig_kernel_only() | |
| * signal here, the signal must have been generated internally | |
| * or must have come from an ancestor namespace. In either | |
| * case, the signal cannot be dropped. | |
| */ | |
| if (unlikely(signal->flags & SIGNAL_UNKILLABLE) && | |
| !sig_kernel_only(signr)) | |
| continue; | |
| if (sig_kernel_stop(signr)) { | |
| /* | |
| * The default action is to stop all threads in | |
| * the thread group. The job control signals | |
| * do nothing in an orphaned pgrp, but SIGSTOP | |
| * always works. Note that siglock needs to be | |
| * dropped during the call to is_orphaned_pgrp() | |
| * because of lock ordering with tasklist_lock. | |
| * This allows an intervening SIGCONT to be posted. | |
| * We need to check for that and bail out if necessary. | |
| */ | |
| if (signr != SIGSTOP) { | |
| spin_unlock_irq(&sighand->siglock); | |
| /* signals can be posted during this window */ | |
| if (is_current_pgrp_orphaned()) | |
| goto relock; | |
| spin_lock_irq(&sighand->siglock); | |
| } | |
| if (likely(do_signal_stop(signr))) { | |
| /* It released the siglock. */ | |
| goto relock; | |
| } | |
| /* | |
| * We didn't actually stop, due to a race | |
| * with SIGCONT or something like that. | |
| */ | |
| continue; | |
| } | |
| fatal: | |
| spin_unlock_irq(&sighand->siglock); | |
| if (unlikely(cgroup_task_frozen(current))) | |
| cgroup_leave_frozen(true); | |
| /* | |
| * Anything else is fatal, maybe with a core dump. | |
| */ | |
| current->flags |= PF_SIGNALED; | |
| if (sig_kernel_coredump(signr)) { | |
| if (print_fatal_signals) | |
| print_fatal_signal(signr); | |
| proc_coredump_connector(current); | |
| /* | |
| * If it was able to dump core, this kills all | |
| * other threads in the group and synchronizes with | |
| * their demise. If we lost the race with another | |
| * thread getting here, it set group_exit_code | |
| * first and our do_group_exit call below will use | |
| * that value and ignore the one we pass it. | |
| */ | |
| vfs_coredump(&ksig->info); | |
| } | |
| /* | |
| * PF_USER_WORKER threads will catch and exit on fatal signals | |
| * themselves. They have cleanup that must be performed, so we | |
| * cannot call do_exit() on their behalf. Note that ksig won't | |
| * be properly initialized, PF_USER_WORKER's shouldn't use it. | |
| */ | |
| if (current->flags & PF_USER_WORKER) | |
| goto out; | |
| /* | |
| * Death signals, no core dump. | |
| */ | |
| do_group_exit(signr); | |
| /* NOTREACHED */ | |
| } | |
| spin_unlock_irq(&sighand->siglock); | |
| ksig->sig = signr; | |
| if (signr && !(ksig->ka.sa.sa_flags & SA_EXPOSE_TAGBITS)) | |
| hide_si_addr_tag_bits(ksig); | |
| out: | |
| return signr > 0; | |
| } | |
| /** | |
| * signal_delivered - called after signal delivery to update blocked signals | |
| * @ksig: kernel signal struct | |
| * @stepping: nonzero if debugger single-step or block-step in use | |
| * | |
| * This function should be called when a signal has successfully been | |
| * delivered. It updates the blocked signals accordingly (@ksig->ka.sa.sa_mask | |
| * is always blocked), and the signal itself is blocked unless %SA_NODEFER | |
| * is set in @ksig->ka.sa.sa_flags. Tracing is notified. | |
| */ | |
| static void signal_delivered(struct ksignal *ksig, int stepping) | |
| { | |
| sigset_t blocked; | |
| /* A signal was successfully delivered, and the | |
| saved sigmask was stored on the signal frame, | |
| and will be restored by sigreturn. So we can | |
| simply clear the restore sigmask flag. */ | |
| clear_restore_sigmask(); | |
| sigorsets(&blocked, ¤t->blocked, &ksig->ka.sa.sa_mask); | |
| if (!(ksig->ka.sa.sa_flags & SA_NODEFER)) | |
| sigaddset(&blocked, ksig->sig); | |
| set_current_blocked(&blocked); | |
| if (current->sas_ss_flags & SS_AUTODISARM) | |
| sas_ss_reset(current); | |
| if (stepping) | |
| ptrace_notify(SIGTRAP, 0); | |
| } | |
| void signal_setup_done(int failed, struct ksignal *ksig, int stepping) | |
| { | |
| if (failed) | |
| force_sigsegv(ksig->sig); | |
| else | |
| signal_delivered(ksig, stepping); | |
| } | |
| /* | |
| * It could be that complete_signal() picked us to notify about the | |
| * group-wide signal. Other threads should be notified now to take | |
| * the shared signals in @which since we will not. | |
| */ | |
| static void retarget_shared_pending(struct task_struct *tsk, sigset_t *which) | |
| { | |
| sigset_t retarget; | |
| struct task_struct *t; | |
| /* Nobody dequeues them in a dying group, see get_signal(). */ | |
| if (tsk->signal->flags & SIGNAL_GROUP_EXIT) | |
| return; | |
| sigandsets(&retarget, &tsk->signal->shared_pending.signal, which); | |
| if (sigisemptyset(&retarget)) | |
| return; | |
| for_other_threads(tsk, t) { | |
| if (t->flags & PF_EXITING) | |
| continue; | |
| if (!has_pending_signals(&retarget, &t->blocked)) | |
| continue; | |
| /* Remove the signals this thread can handle. */ | |
| sigandsets(&retarget, &retarget, &t->blocked); | |
| if (!task_sigpending(t)) | |
| signal_wake_up(t, 0); | |
| if (sigisemptyset(&retarget)) | |
| break; | |
| } | |
| } | |
| void exit_signals(struct task_struct *tsk) | |
| { | |
| LIST_HEAD(sigq_list); | |
| int group_stop = 0; | |
| /* | |
| * @tsk is about to have PF_EXITING set - lock out users which | |
| * expect a stable threadgroup. | |
| */ | |
| cgroup_threadgroup_change_begin(tsk); | |
| scoped_guard(spinlock_irq, &tsk->sighand->siglock) { | |
| tsk->flags |= PF_EXITING; | |
| sigqueue_dequeue_pending(&tsk->pending, &sigq_list); | |
| if (task_sigpending(tsk) && !thread_group_empty(tsk) && | |
| !(tsk->signal->flags & SIGNAL_GROUP_EXIT)) { | |
| sigset_t unblocked = tsk->blocked; | |
| signotset(&unblocked); | |
| retarget_shared_pending(tsk, &unblocked); | |
| if (unlikely(tsk->jobctl & JOBCTL_STOP_PENDING) && | |
| task_participate_group_stop(tsk)) | |
| group_stop = CLD_STOPPED; | |
| } | |
| } | |
| cgroup_threadgroup_change_end(tsk); | |
| flush_sigqueue_list(&sigq_list); | |
| /* | |
| * If group stop has completed, deliver the notification. This | |
| * should always go to the real parent of the group leader. | |
| */ | |
| if (unlikely(group_stop)) { | |
| read_lock(&tasklist_lock); | |
| do_notify_parent_cldstop(tsk, false, group_stop); | |
| read_unlock(&tasklist_lock); | |
| } | |
| } | |
| /* | |
| * System call entry points. | |
| */ | |
| /** | |
| * sys_restart_syscall - restart a system call | |
| */ | |
| SYSCALL_DEFINE0(restart_syscall) | |
| { | |
| struct restart_block *restart = ¤t->restart_block; | |
| return restart->fn(restart); | |
| } | |
| long do_no_restart_syscall(struct restart_block *param) | |
| { | |
| return -EINTR; | |
| } | |
| static void __set_task_blocked(struct task_struct *tsk, const sigset_t *newset) | |
| { | |
| sigset_t floor, floored; | |
| /* A user worker never unblocks anything but SIGKILL and SIGSTOP. */ | |
| if (unlikely(tsk->flags & PF_USER_WORKER)) { | |
| siginitsetinv(&floor, SIG_KERNEL_ONLY_MASK); | |
| sigorsets(&floored, newset, &floor); | |
| WARN_ON_ONCE(!sigequalsets(&floored, newset)); | |
| newset = &floored; | |
| } | |
| if (task_sigpending(tsk) && !thread_group_empty(tsk)) { | |
| sigset_t newblocked; | |
| /* A set of now blocked but previously unblocked signals. */ | |
| sigandnsets(&newblocked, newset, ¤t->blocked); | |
| retarget_shared_pending(tsk, &newblocked); | |
| } | |
| tsk->blocked = *newset; | |
| recalc_sigpending(); | |
| } | |
| /** | |
| * set_current_blocked - change current->blocked mask | |
| * @newset: new mask | |
| * | |
| * It is wrong to change ->blocked directly, this helper should be used | |
| * to ensure the process can't miss a shared signal we are going to block. | |
| */ | |
| void set_current_blocked(sigset_t *newset) | |
| { | |
| sigdelsetmask(newset, sigmask(SIGKILL) | sigmask(SIGSTOP)); | |
| __set_current_blocked(newset); | |
| } | |
| void __set_current_blocked(const sigset_t *newset) | |
| { | |
| struct task_struct *tsk = current; | |
| /* | |
| * In case the signal mask hasn't changed, there is nothing we need | |
| * to do. The current->blocked shouldn't be modified by other task. | |
| */ | |
| if (sigequalsets(&tsk->blocked, newset)) | |
| return; | |
| spin_lock_irq(&tsk->sighand->siglock); | |
| __set_task_blocked(tsk, newset); | |
| spin_unlock_irq(&tsk->sighand->siglock); | |
| } | |
| /* | |
| * This is also useful for kernel threads that want to temporarily | |
| * (or permanently) block certain signals. | |
| * | |
| * NOTE! Unlike the user-mode sys_sigprocmask(), the kernel | |
| * interface happily blocks "unblockable" signals like SIGKILL | |
| * and friends. | |
| */ | |
| int sigprocmask(int how, sigset_t *set, sigset_t *oldset) | |
| { | |
| struct task_struct *tsk = current; | |
| sigset_t newset; | |
| /* Lockless, only current can change ->blocked, never from irq */ | |
| if (oldset) | |
| *oldset = tsk->blocked; | |
| switch (how) { | |
| case SIG_BLOCK: | |
| sigorsets(&newset, &tsk->blocked, set); | |
| break; | |
| case SIG_UNBLOCK: | |
| sigandnsets(&newset, &tsk->blocked, set); | |
| break; | |
| case SIG_SETMASK: | |
| newset = *set; | |
| break; | |
| default: | |
| return -EINVAL; | |
| } | |
| __set_current_blocked(&newset); | |
| return 0; | |
| } | |
| EXPORT_SYMBOL(sigprocmask); | |
| /* | |
| * The api helps set app-provided sigmasks. | |
| * | |
| * This is useful for syscalls such as ppoll, pselect, io_pgetevents and | |
| * epoll_pwait where a new sigmask is passed from userland for the syscalls. | |
| * | |
| * Note that it does set_restore_sigmask() in advance, so it must be always | |
| * paired with restore_saved_sigmask_unless() before return from syscall. | |
| */ | |
| int set_user_sigmask(const sigset_t __user *umask, size_t sigsetsize) | |
| { | |
| sigset_t kmask; | |
| if (!umask) | |
| return 0; | |
| if (sigsetsize != sizeof(sigset_t)) | |
| return -EINVAL; | |
| if (copy_from_user(&kmask, umask, sizeof(sigset_t))) | |
| return -EFAULT; | |
| set_restore_sigmask(); | |
| current->saved_sigmask = current->blocked; | |
| set_current_blocked(&kmask); | |
| return 0; | |
| } | |
| #ifdef CONFIG_COMPAT | |
| int set_compat_user_sigmask(const compat_sigset_t __user *umask, | |
| size_t sigsetsize) | |
| { | |
| sigset_t kmask; | |
| if (!umask) | |
| return 0; | |
| if (sigsetsize != sizeof(compat_sigset_t)) | |
| return -EINVAL; | |
| if (get_compat_sigset(&kmask, umask)) | |
| return -EFAULT; | |
| set_restore_sigmask(); | |
| current->saved_sigmask = current->blocked; | |
| set_current_blocked(&kmask); | |
| return 0; | |
| } | |
| #endif | |
| /** | |
| * sys_rt_sigprocmask - change the list of currently blocked signals | |
| * @how: whether to add, remove, or set signals | |
| * @nset: stores pending signals | |
| * @oset: previous value of signal mask if non-null | |
| * @sigsetsize: size of sigset_t type | |
| */ | |
| SYSCALL_DEFINE4(rt_sigprocmask, int, how, sigset_t __user *, nset, | |
| sigset_t __user *, oset, size_t, sigsetsize) | |
| { | |
| sigset_t old_set, new_set; | |
| int error; | |
| /* XXX: Don't preclude handling different sized sigset_t's. */ | |
| if (sigsetsize != sizeof(sigset_t)) | |
| return -EINVAL; | |
| old_set = current->blocked; | |
| if (nset) { | |
| if (copy_from_user(&new_set, nset, sizeof(sigset_t))) | |
| return -EFAULT; | |
| sigdelsetmask(&new_set, sigmask(SIGKILL)|sigmask(SIGSTOP)); | |
| error = sigprocmask(how, &new_set, NULL); | |
| if (error) | |
| return error; | |
| } | |
| if (oset) { | |
| if (copy_to_user(oset, &old_set, sizeof(sigset_t))) | |
| return -EFAULT; | |
| } | |
| return 0; | |
| } | |
| #ifdef CONFIG_COMPAT | |
| COMPAT_SYSCALL_DEFINE4(rt_sigprocmask, int, how, compat_sigset_t __user *, nset, | |
| compat_sigset_t __user *, oset, compat_size_t, sigsetsize) | |
| { | |
| sigset_t old_set = current->blocked; | |
| /* XXX: Don't preclude handling different sized sigset_t's. */ | |
| if (sigsetsize != sizeof(sigset_t)) | |
| return -EINVAL; | |
| if (nset) { | |
| sigset_t new_set; | |
| int error; | |
| if (get_compat_sigset(&new_set, nset)) | |
| return -EFAULT; | |
| sigdelsetmask(&new_set, sigmask(SIGKILL)|sigmask(SIGSTOP)); | |
| error = sigprocmask(how, &new_set, NULL); | |
| if (error) | |
| return error; | |
| } | |
| return oset ? put_compat_sigset(oset, &old_set, sizeof(*oset)) : 0; | |
| } | |
| #endif | |
| static void do_sigpending(sigset_t *set) | |
| { | |
| spin_lock_irq(¤t->sighand->siglock); | |
| sigorsets(set, ¤t->pending.signal, | |
| ¤t->signal->shared_pending.signal); | |
| spin_unlock_irq(¤t->sighand->siglock); | |
| /* Outside the lock because only this thread touches it. */ | |
| sigandsets(set, ¤t->blocked, set); | |
| } | |
| /** | |
| * sys_rt_sigpending - examine a pending signal that has been raised | |
| * while blocked | |
| * @uset: stores pending signals | |
| * @sigsetsize: size of sigset_t type or larger | |
| */ | |
| SYSCALL_DEFINE2(rt_sigpending, sigset_t __user *, uset, size_t, sigsetsize) | |
| { | |
| sigset_t set; | |
| if (sigsetsize > sizeof(*uset)) | |
| return -EINVAL; | |
| do_sigpending(&set); | |
| if (copy_to_user(uset, &set, sigsetsize)) | |
| return -EFAULT; | |
| return 0; | |
| } | |
| #ifdef CONFIG_COMPAT | |
| COMPAT_SYSCALL_DEFINE2(rt_sigpending, compat_sigset_t __user *, uset, | |
| compat_size_t, sigsetsize) | |
| { | |
| sigset_t set; | |
| if (sigsetsize > sizeof(*uset)) | |
| return -EINVAL; | |
| do_sigpending(&set); | |
| return put_compat_sigset(uset, &set, sigsetsize); | |
| } | |
| #endif | |
| static const struct { | |
| unsigned char limit, layout; | |
| } sig_sicodes[] = { | |
| [SIGILL] = { NSIGILL, SIL_FAULT }, | |
| [SIGFPE] = { NSIGFPE, SIL_FAULT }, | |
| [SIGSEGV] = { NSIGSEGV, SIL_FAULT }, | |
| [SIGBUS] = { NSIGBUS, SIL_FAULT }, | |
| [SIGTRAP] = { NSIGTRAP, SIL_FAULT }, | |
| #if defined(SIGEMT) | |
| [SIGEMT] = { NSIGEMT, SIL_FAULT }, | |
| #endif | |
| [SIGCHLD] = { NSIGCHLD, SIL_CHLD }, | |
| [SIGPOLL] = { NSIGPOLL, SIL_POLL }, | |
| [SIGSYS] = { NSIGSYS, SIL_SYS }, | |
| }; | |
| static bool known_siginfo_layout(unsigned sig, int si_code) | |
| { | |
| if (si_code == SI_KERNEL) | |
| return true; | |
| else if ((si_code > SI_USER)) { | |
| if (sig_specific_sicodes(sig)) { | |
| if (si_code <= sig_sicodes[sig].limit) | |
| return true; | |
| } | |
| else if (si_code <= NSIGPOLL) | |
| return true; | |
| } | |
| else if (si_code >= SI_DETHREAD) | |
| return true; | |
| else if (si_code == SI_ASYNCNL) | |
| return true; | |
| return false; | |
| } | |
| enum siginfo_layout siginfo_layout(unsigned sig, int si_code) | |
| { | |
| enum siginfo_layout layout = SIL_KILL; | |
| if ((si_code > SI_USER) && (si_code < SI_KERNEL)) { | |
| if ((sig < ARRAY_SIZE(sig_sicodes)) && | |
| (si_code <= sig_sicodes[sig].limit)) { | |
| layout = sig_sicodes[sig].layout; | |
| /* Handle the exceptions */ | |
| if ((sig == SIGBUS) && | |
| (si_code >= BUS_MCEERR_AR) && (si_code <= BUS_MCEERR_AO)) | |
| layout = SIL_FAULT_MCEERR; | |
| else if ((sig == SIGSEGV) && (si_code == SEGV_BNDERR)) | |
| layout = SIL_FAULT_BNDERR; | |
| #ifdef SEGV_PKUERR | |
| else if ((sig == SIGSEGV) && (si_code == SEGV_PKUERR)) | |
| layout = SIL_FAULT_PKUERR; | |
| #endif | |
| else if ((sig == SIGTRAP) && (si_code == TRAP_PERF)) | |
| layout = SIL_FAULT_PERF_EVENT; | |
| else if (IS_ENABLED(CONFIG_SPARC) && | |
| (sig == SIGILL) && (si_code == ILL_ILLTRP)) | |
| layout = SIL_FAULT_TRAPNO; | |
| else if (IS_ENABLED(CONFIG_ALPHA) && | |
| ((sig == SIGFPE) || | |
| ((sig == SIGTRAP) && (si_code == TRAP_UNK)))) | |
| layout = SIL_FAULT_TRAPNO; | |
| } | |
| else if (si_code <= NSIGPOLL) | |
| layout = SIL_POLL; | |
| } else { | |
| if (si_code == SI_TIMER) | |
| layout = SIL_TIMER; | |
| else if (si_code == SI_SIGIO) | |
| layout = SIL_POLL; | |
| else if (si_code < 0) | |
| layout = SIL_RT; | |
| } | |
| return layout; | |
| } | |
| static inline char __user *si_expansion(const siginfo_t __user *info) | |
| { | |
| return ((char __user *)info) + sizeof(struct kernel_siginfo); | |
| } | |
| int copy_siginfo_to_user(siginfo_t __user *to, const kernel_siginfo_t *from) | |
| { | |
| char __user *expansion = si_expansion(to); | |
| if (copy_to_user(to, from , sizeof(struct kernel_siginfo))) | |
| return -EFAULT; | |
| if (clear_user(expansion, SI_EXPANSION_SIZE)) | |
| return -EFAULT; | |
| return 0; | |
| } | |
| static int post_copy_siginfo_from_user(kernel_siginfo_t *info, | |
| const siginfo_t __user *from) | |
| { | |
| if (unlikely(!known_siginfo_layout(info->si_signo, info->si_code))) { | |
| char __user *expansion = si_expansion(from); | |
| char buf[SI_EXPANSION_SIZE]; | |
| int i; | |
| /* | |
| * An unknown si_code might need more than | |
| * sizeof(struct kernel_siginfo) bytes. Verify all of the | |
| * extra bytes are 0. This guarantees copy_siginfo_to_user | |
| * will return this data to userspace exactly. | |
| */ | |
| if (copy_from_user(&buf, expansion, SI_EXPANSION_SIZE)) | |
| return -EFAULT; | |
| for (i = 0; i < SI_EXPANSION_SIZE; i++) { | |
| if (buf[i] != 0) | |
| return -E2BIG; | |
| } | |
| } | |
| return 0; | |
| } | |
| static int __copy_siginfo_from_user(int signo, kernel_siginfo_t *to, | |
| const siginfo_t __user *from) | |
| { | |
| if (copy_from_user(to, from, sizeof(struct kernel_siginfo))) | |
| return -EFAULT; | |
| to->si_signo = signo; | |
| return post_copy_siginfo_from_user(to, from); | |
| } | |
| int copy_siginfo_from_user(kernel_siginfo_t *to, const siginfo_t __user *from) | |
| { | |
| if (copy_from_user(to, from, sizeof(struct kernel_siginfo))) | |
| return -EFAULT; | |
| return post_copy_siginfo_from_user(to, from); | |
| } | |
| #ifdef CONFIG_COMPAT | |
| /** | |
| * copy_siginfo_to_external32 - copy a kernel siginfo into a compat user siginfo | |
| * @to: compat siginfo destination | |
| * @from: kernel siginfo source | |
| * | |
| * Note: This function does not work properly for the SIGCHLD on x32, but | |
| * fortunately it doesn't have to. The only valid callers for this function are | |
| * copy_siginfo_to_user32, which is overriden for x32 and the coredump code. | |
| * The latter does not care because SIGCHLD will never cause a coredump. | |
| */ | |
| void copy_siginfo_to_external32(struct compat_siginfo *to, | |
| const struct kernel_siginfo *from) | |
| { | |
| memset(to, 0, sizeof(*to)); | |
| to->si_signo = from->si_signo; | |
| to->si_errno = from->si_errno; | |
| to->si_code = from->si_code; | |
| switch(siginfo_layout(from->si_signo, from->si_code)) { | |
| case SIL_KILL: | |
| to->si_pid = from->si_pid; | |
| to->si_uid = from->si_uid; | |
| break; | |
| case SIL_TIMER: | |
| to->si_tid = from->si_tid; | |
| to->si_overrun = from->si_overrun; | |
| to->si_int = from->si_int; | |
| break; | |
| case SIL_POLL: | |
| to->si_band = from->si_band; | |
| to->si_fd = from->si_fd; | |
| break; | |
| case SIL_FAULT: | |
| to->si_addr = ptr_to_compat(from->si_addr); | |
| break; | |
| case SIL_FAULT_TRAPNO: | |
| to->si_addr = ptr_to_compat(from->si_addr); | |
| to->si_trapno = from->si_trapno; | |
| break; | |
| case SIL_FAULT_MCEERR: | |
| to->si_addr = ptr_to_compat(from->si_addr); | |
| to->si_addr_lsb = from->si_addr_lsb; | |
| break; | |
| case SIL_FAULT_BNDERR: | |
| to->si_addr = ptr_to_compat(from->si_addr); | |
| to->si_lower = ptr_to_compat(from->si_lower); | |
| to->si_upper = ptr_to_compat(from->si_upper); | |
| break; | |
| case SIL_FAULT_PKUERR: | |
| to->si_addr = ptr_to_compat(from->si_addr); | |
| to->si_pkey = from->si_pkey; | |
| break; | |
| case SIL_FAULT_PERF_EVENT: | |
| to->si_addr = ptr_to_compat(from->si_addr); | |
| to->si_perf_data = from->si_perf_data; | |
| to->si_perf_type = from->si_perf_type; | |
| to->si_perf_flags = from->si_perf_flags; | |
| break; | |
| case SIL_CHLD: | |
| to->si_pid = from->si_pid; | |
| to->si_uid = from->si_uid; | |
| to->si_status = from->si_status; | |
| to->si_utime = from->si_utime; | |
| to->si_stime = from->si_stime; | |
| break; | |
| case SIL_RT: | |
| to->si_pid = from->si_pid; | |
| to->si_uid = from->si_uid; | |
| to->si_int = from->si_int; | |
| break; | |
| case SIL_SYS: | |
| to->si_call_addr = ptr_to_compat(from->si_call_addr); | |
| to->si_syscall = from->si_syscall; | |
| to->si_arch = from->si_arch; | |
| break; | |
| } | |
| } | |
| int __copy_siginfo_to_user32(struct compat_siginfo __user *to, | |
| const struct kernel_siginfo *from) | |
| { | |
| struct compat_siginfo new; | |
| copy_siginfo_to_external32(&new, from); | |
| if (copy_to_user(to, &new, sizeof(struct compat_siginfo))) | |
| return -EFAULT; | |
| return 0; | |
| } | |
| static int post_copy_siginfo_from_user32(kernel_siginfo_t *to, | |
| const struct compat_siginfo *from) | |
| { | |
| clear_siginfo(to); | |
| to->si_signo = from->si_signo; | |
| to->si_errno = from->si_errno; | |
| to->si_code = from->si_code; | |
| switch(siginfo_layout(from->si_signo, from->si_code)) { | |
| case SIL_KILL: | |
| to->si_pid = from->si_pid; | |
| to->si_uid = from->si_uid; | |
| break; | |
| case SIL_TIMER: | |
| to->si_tid = from->si_tid; | |
| to->si_overrun = from->si_overrun; | |
| to->si_int = from->si_int; | |
| break; | |
| case SIL_POLL: | |
| to->si_band = from->si_band; | |
| to->si_fd = from->si_fd; | |
| break; | |
| case SIL_FAULT: | |
| to->si_addr = compat_ptr(from->si_addr); | |
| break; | |
| case SIL_FAULT_TRAPNO: | |
| to->si_addr = compat_ptr(from->si_addr); | |
| to->si_trapno = from->si_trapno; | |
| break; | |
| case SIL_FAULT_MCEERR: | |
| to->si_addr = compat_ptr(from->si_addr); | |
| to->si_addr_lsb = from->si_addr_lsb; | |
| break; | |
| case SIL_FAULT_BNDERR: | |
| to->si_addr = compat_ptr(from->si_addr); | |
| to->si_lower = compat_ptr(from->si_lower); | |
| to->si_upper = compat_ptr(from->si_upper); | |
| break; | |
| case SIL_FAULT_PKUERR: | |
| to->si_addr = compat_ptr(from->si_addr); | |
| to->si_pkey = from->si_pkey; | |
| break; | |
| case SIL_FAULT_PERF_EVENT: | |
| to->si_addr = compat_ptr(from->si_addr); | |
| to->si_perf_data = from->si_perf_data; | |
| to->si_perf_type = from->si_perf_type; | |
| to->si_perf_flags = from->si_perf_flags; | |
| break; | |
| case SIL_CHLD: | |
| to->si_pid = from->si_pid; | |
| to->si_uid = from->si_uid; | |
| to->si_status = from->si_status; | |
| #ifdef CONFIG_X86_X32_ABI | |
| if (in_x32_syscall()) { | |
| to->si_utime = from->_sifields._sigchld_x32._utime; | |
| to->si_stime = from->_sifields._sigchld_x32._stime; | |
| } else | |
| #endif | |
| { | |
| to->si_utime = from->si_utime; | |
| to->si_stime = from->si_stime; | |
| } | |
| break; | |
| case SIL_RT: | |
| to->si_pid = from->si_pid; | |
| to->si_uid = from->si_uid; | |
| to->si_int = from->si_int; | |
| break; | |
| case SIL_SYS: | |
| to->si_call_addr = compat_ptr(from->si_call_addr); | |
| to->si_syscall = from->si_syscall; | |
| to->si_arch = from->si_arch; | |
| break; | |
| } | |
| return 0; | |
| } | |
| static int __copy_siginfo_from_user32(int signo, struct kernel_siginfo *to, | |
| const struct compat_siginfo __user *ufrom) | |
| { | |
| struct compat_siginfo from; | |
| if (copy_from_user(&from, ufrom, sizeof(struct compat_siginfo))) | |
| return -EFAULT; | |
| from.si_signo = signo; | |
| return post_copy_siginfo_from_user32(to, &from); | |
| } | |
| int copy_siginfo_from_user32(struct kernel_siginfo *to, | |
| const struct compat_siginfo __user *ufrom) | |
| { | |
| struct compat_siginfo from; | |
| if (copy_from_user(&from, ufrom, sizeof(struct compat_siginfo))) | |
| return -EFAULT; | |
| return post_copy_siginfo_from_user32(to, &from); | |
| } | |
| #endif /* CONFIG_COMPAT */ | |
| /** | |
| * do_sigtimedwait - wait for queued signals specified in @which | |
| * @which: queued signals to wait for | |
| * @info: if non-null, the signal's siginfo is returned here | |
| * @ts: upper bound on process time suspension | |
| */ | |
| static int do_sigtimedwait(const sigset_t *which, kernel_siginfo_t *info, | |
| const struct timespec64 *ts) | |
| { | |
| ktime_t *to = NULL, timeout = KTIME_MAX; | |
| struct task_struct *tsk = current; | |
| sigset_t mask = *which; | |
| enum pid_type type; | |
| int sig, ret = 0; | |
| if (ts) { | |
| if (!timespec64_valid(ts)) | |
| return -EINVAL; | |
| timeout = timespec64_to_ktime(*ts); | |
| to = &timeout; | |
| } | |
| /* | |
| * Invert the set of allowed signals to get those we want to block. | |
| */ | |
| sigdelsetmask(&mask, sigmask(SIGKILL) | sigmask(SIGSTOP)); | |
| signotset(&mask); | |
| spin_lock_irq(&tsk->sighand->siglock); | |
| sig = dequeue_signal(&mask, info, &type); | |
| if (!sig && timeout) { | |
| /* | |
| * None ready, temporarily unblock those we're interested | |
| * while we are sleeping in so that we'll be awakened when | |
| * they arrive. Unblocking is always fine, we can avoid | |
| * set_current_blocked(). | |
| */ | |
| tsk->real_blocked = tsk->blocked; | |
| sigandsets(&tsk->blocked, &tsk->blocked, &mask); | |
| recalc_sigpending(); | |
| spin_unlock_irq(&tsk->sighand->siglock); | |
| __set_current_state(TASK_INTERRUPTIBLE|TASK_FREEZABLE); | |
| ret = schedule_hrtimeout_range(to, tsk->timer_slack_ns, | |
| HRTIMER_MODE_REL); | |
| spin_lock_irq(&tsk->sighand->siglock); | |
| __set_task_blocked(tsk, &tsk->real_blocked); | |
| sigemptyset(&tsk->real_blocked); | |
| sig = dequeue_signal(&mask, info, &type); | |
| } | |
| spin_unlock_irq(&tsk->sighand->siglock); | |
| if (sig) | |
| return sig; | |
| return ret ? -EINTR : -EAGAIN; | |
| } | |
| /** | |
| * sys_rt_sigtimedwait - synchronously wait for queued signals specified | |
| * in @uthese | |
| * @uthese: queued signals to wait for | |
| * @uinfo: if non-null, the signal's siginfo is returned here | |
| * @uts: upper bound on process time suspension | |
| * @sigsetsize: size of sigset_t type | |
| */ | |
| SYSCALL_DEFINE4(rt_sigtimedwait, const sigset_t __user *, uthese, | |
| siginfo_t __user *, uinfo, | |
| const struct __kernel_timespec __user *, uts, | |
| size_t, sigsetsize) | |
| { | |
| sigset_t these; | |
| struct timespec64 ts; | |
| kernel_siginfo_t info; | |
| int ret; | |
| /* XXX: Don't preclude handling different sized sigset_t's. */ | |
| if (sigsetsize != sizeof(sigset_t)) | |
| return -EINVAL; | |
| if (copy_from_user(&these, uthese, sizeof(these))) | |
| return -EFAULT; | |
| if (uts) { | |
| if (get_timespec64(&ts, uts)) | |
| return -EFAULT; | |
| } | |
| ret = do_sigtimedwait(&these, &info, uts ? &ts : NULL); | |
| if (ret > 0 && uinfo) { | |
| if (copy_siginfo_to_user(uinfo, &info)) | |
| ret = -EFAULT; | |
| } | |
| return ret; | |
| } | |
| #ifdef CONFIG_COMPAT_32BIT_TIME | |
| SYSCALL_DEFINE4(rt_sigtimedwait_time32, const sigset_t __user *, uthese, | |
| siginfo_t __user *, uinfo, | |
| const struct old_timespec32 __user *, uts, | |
| size_t, sigsetsize) | |
| { | |
| sigset_t these; | |
| struct timespec64 ts; | |
| kernel_siginfo_t info; | |
| int ret; | |
| if (sigsetsize != sizeof(sigset_t)) | |
| return -EINVAL; | |
| if (copy_from_user(&these, uthese, sizeof(these))) | |
| return -EFAULT; | |
| if (uts) { | |
| if (get_old_timespec32(&ts, uts)) | |
| return -EFAULT; | |
| } | |
| ret = do_sigtimedwait(&these, &info, uts ? &ts : NULL); | |
| if (ret > 0 && uinfo) { | |
| if (copy_siginfo_to_user(uinfo, &info)) | |
| ret = -EFAULT; | |
| } | |
| return ret; | |
| } | |
| #endif | |
| #ifdef CONFIG_COMPAT | |
| COMPAT_SYSCALL_DEFINE4(rt_sigtimedwait_time64, compat_sigset_t __user *, uthese, | |
| struct compat_siginfo __user *, uinfo, | |
| struct __kernel_timespec __user *, uts, compat_size_t, sigsetsize) | |
| { | |
| sigset_t s; | |
| struct timespec64 t; | |
| kernel_siginfo_t info; | |
| long ret; | |
| if (sigsetsize != sizeof(sigset_t)) | |
| return -EINVAL; | |
| if (get_compat_sigset(&s, uthese)) | |
| return -EFAULT; | |
| if (uts) { | |
| if (get_timespec64(&t, uts)) | |
| return -EFAULT; | |
| } | |
| ret = do_sigtimedwait(&s, &info, uts ? &t : NULL); | |
| if (ret > 0 && uinfo) { | |
| if (copy_siginfo_to_user32(uinfo, &info)) | |
| ret = -EFAULT; | |
| } | |
| return ret; | |
| } | |
| #ifdef CONFIG_COMPAT_32BIT_TIME | |
| COMPAT_SYSCALL_DEFINE4(rt_sigtimedwait_time32, compat_sigset_t __user *, uthese, | |
| struct compat_siginfo __user *, uinfo, | |
| struct old_timespec32 __user *, uts, compat_size_t, sigsetsize) | |
| { | |
| sigset_t s; | |
| struct timespec64 t; | |
| kernel_siginfo_t info; | |
| long ret; | |
| if (sigsetsize != sizeof(sigset_t)) | |
| return -EINVAL; | |
| if (get_compat_sigset(&s, uthese)) | |
| return -EFAULT; | |
| if (uts) { | |
| if (get_old_timespec32(&t, uts)) | |
| return -EFAULT; | |
| } | |
| ret = do_sigtimedwait(&s, &info, uts ? &t : NULL); | |
| if (ret > 0 && uinfo) { | |
| if (copy_siginfo_to_user32(uinfo, &info)) | |
| ret = -EFAULT; | |
| } | |
| return ret; | |
| } | |
| #endif | |
| #endif | |
| static void prepare_kill_siginfo(int sig, struct kernel_siginfo *info, | |
| enum pid_type type) | |
| { | |
| clear_siginfo(info); | |
| info->si_signo = sig; | |
| info->si_errno = 0; | |
| info->si_code = (type == PIDTYPE_PID) ? SI_TKILL : SI_USER; | |
| info->si_pid = task_tgid_vnr(current); | |
| info->si_uid = from_kuid_munged(current_user_ns(), current_uid()); | |
| } | |
| /* | |
| * Not even root can pretend to send SI_FROMKERNEL() signals. | |
| * Nor can they impersonate kill()/tgkill(), which have si_pid/uid | |
| */ | |
| static bool si_code_reserved_to_kernel(int si_code) | |
| { | |
| return si_code >= 0 || si_code == SI_TKILL; | |
| } | |
| /** | |
| * sys_kill - send a signal to a process | |
| * @pid: the PID of the process | |
| * @sig: signal to be sent | |
| */ | |
| SYSCALL_DEFINE2(kill, pid_t, pid, int, sig) | |
| { | |
| return kill_something_info(sig, SEND_SIG_NOINFO, pid); | |
| } | |
| /* | |
| * Verify that the signaler and signalee either are in the same pid namespace | |
| * or that the signaler's pid namespace is an ancestor of the signalee's pid | |
| * namespace. | |
| */ | |
| static bool access_pidfd_pidns(struct pid *pid) | |
| { | |
| struct pid_namespace *active = task_active_pid_ns(current); | |
| struct pid_namespace *p = ns_of_pid(pid); | |
| for (;;) { | |
| if (!p) | |
| return false; | |
| if (p == active) | |
| break; | |
| p = p->parent; | |
| } | |
| return true; | |
| } | |
| static int copy_siginfo_from_user_any(kernel_siginfo_t *kinfo, | |
| siginfo_t __user *info) | |
| { | |
| #ifdef CONFIG_COMPAT | |
| /* | |
| * Avoid hooking up compat syscalls and instead handle necessary | |
| * conversions here. Note, this is a stop-gap measure and should not be | |
| * considered a generic solution. | |
| */ | |
| if (in_compat_syscall()) | |
| return copy_siginfo_from_user32( | |
| kinfo, (struct compat_siginfo __user *)info); | |
| #endif | |
| return copy_siginfo_from_user(kinfo, info); | |
| } | |
| static struct pid *pidfd_to_pid(const struct file *file) | |
| { | |
| struct pid *pid; | |
| pid = pidfd_pid(file); | |
| if (!IS_ERR(pid)) | |
| return pid; | |
| return tgid_pidfd_to_pid(file); | |
| } | |
| #define PIDFD_SEND_SIGNAL_FLAGS \ | |
| (PIDFD_SIGNAL_THREAD | PIDFD_SIGNAL_THREAD_GROUP | \ | |
| PIDFD_SIGNAL_PROCESS_GROUP) | |
| static int do_pidfd_send_signal(struct pid *pid, int sig, enum pid_type type, | |
| siginfo_t __user *info, unsigned int flags) | |
| { | |
| kernel_siginfo_t kinfo; | |
| switch (flags) { | |
| case PIDFD_SIGNAL_THREAD: | |
| type = PIDTYPE_PID; | |
| break; | |
| case PIDFD_SIGNAL_THREAD_GROUP: | |
| type = PIDTYPE_TGID; | |
| break; | |
| case PIDFD_SIGNAL_PROCESS_GROUP: | |
| type = PIDTYPE_PGID; | |
| break; | |
| } | |
| if (info) { | |
| int ret; | |
| ret = copy_siginfo_from_user_any(&kinfo, info); | |
| if (unlikely(ret)) | |
| return ret; | |
| if (unlikely(sig != kinfo.si_signo)) | |
| return -EINVAL; | |
| /* Only allow sending arbitrary signals to yourself. */ | |
| if ((task_pid(current) != pid || type > PIDTYPE_TGID) && | |
| si_code_reserved_to_kernel(kinfo.si_code)) | |
| return -EPERM; | |
| } else { | |
| prepare_kill_siginfo(sig, &kinfo, type); | |
| } | |
| if (type == PIDTYPE_PGID) | |
| return kill_pgrp_info(sig, &kinfo, pid); | |
| return kill_pid_info_type(sig, &kinfo, pid, type); | |
| } | |
| /** | |
| * sys_pidfd_send_signal - Signal a process through a pidfd | |
| * @pidfd: file descriptor of the process | |
| * @sig: signal to send | |
| * @info: signal info | |
| * @flags: future flags | |
| * | |
| * Send the signal to the thread group or to the individual thread depending | |
| * on PIDFD_THREAD. | |
| * In the future extension to @flags may be used to override the default scope | |
| * of @pidfd. | |
| * | |
| * Return: 0 on success, negative errno on failure | |
| */ | |
| SYSCALL_DEFINE4(pidfd_send_signal, int, pidfd, int, sig, | |
| siginfo_t __user *, info, unsigned int, flags) | |
| { | |
| struct pid *pid; | |
| enum pid_type type; | |
| int ret; | |
| /* Enforce flags be set to 0 until we add an extension. */ | |
| if (flags & ~PIDFD_SEND_SIGNAL_FLAGS) | |
| return -EINVAL; | |
| /* Ensure that only a single signal scope determining flag is set. */ | |
| if (hweight32(flags & PIDFD_SEND_SIGNAL_FLAGS) > 1) | |
| return -EINVAL; | |
| switch (pidfd) { | |
| case PIDFD_SELF_THREAD: | |
| pid = get_task_pid(current, PIDTYPE_PID); | |
| type = PIDTYPE_PID; | |
| break; | |
| case PIDFD_SELF_THREAD_GROUP: | |
| pid = get_task_pid(current, PIDTYPE_TGID); | |
| type = PIDTYPE_TGID; | |
| break; | |
| default: { | |
| CLASS(fd, f)(pidfd); | |
| if (fd_empty(f)) | |
| return -EBADF; | |
| /* Is this a pidfd? */ | |
| pid = pidfd_to_pid(fd_file(f)); | |
| if (IS_ERR(pid)) | |
| return PTR_ERR(pid); | |
| if (!access_pidfd_pidns(pid)) | |
| return -EINVAL; | |
| /* Infer scope from the type of pidfd. */ | |
| if (fd_file(f)->f_flags & PIDFD_THREAD) | |
| type = PIDTYPE_PID; | |
| else | |
| type = PIDTYPE_TGID; | |
| return do_pidfd_send_signal(pid, sig, type, info, flags); | |
| } | |
| } | |
| ret = do_pidfd_send_signal(pid, sig, type, info, flags); | |
| put_pid(pid); | |
| return ret; | |
| } | |
| static int | |
| do_send_specific(pid_t tgid, pid_t pid, int sig, struct kernel_siginfo *info) | |
| { | |
| struct task_struct *p; | |
| int error = -ESRCH; | |
| rcu_read_lock(); | |
| p = find_task_by_vpid(pid); | |
| if (p && (tgid <= 0 || task_tgid_vnr(p) == tgid)) { | |
| error = check_kill_permission(sig, info, p); | |
| /* | |
| * The null signal is a permissions and process existence | |
| * probe. No signal is actually delivered. | |
| */ | |
| if (!error && sig) { | |
| error = do_send_sig_info(sig, info, p, PIDTYPE_PID); | |
| /* | |
| * If lock_task_sighand() failed we pretend the task | |
| * dies after receiving the signal. The window is tiny, | |
| * and the signal is private anyway. | |
| */ | |
| if (unlikely(error == -ESRCH)) | |
| error = 0; | |
| } | |
| } | |
| rcu_read_unlock(); | |
| return error; | |
| } | |
| static int do_tkill(pid_t tgid, pid_t pid, int sig) | |
| { | |
| struct kernel_siginfo info; | |
| prepare_kill_siginfo(sig, &info, PIDTYPE_PID); | |
| return do_send_specific(tgid, pid, sig, &info); | |
| } | |
| /** | |
| * sys_tgkill - send signal to one specific thread | |
| * @tgid: the thread group ID of the thread | |
| * @pid: the PID of the thread | |
| * @sig: signal to be sent | |
| * | |
| * This syscall also checks the @tgid and returns -ESRCH even if the PID | |
| * exists but it's not belonging to the target process anymore. This | |
| * method solves the problem of threads exiting and PIDs getting reused. | |
| */ | |
| SYSCALL_DEFINE3(tgkill, pid_t, tgid, pid_t, pid, int, sig) | |
| { | |
| /* This is only valid for single tasks */ | |
| if (pid <= 0 || tgid <= 0) | |
| return -EINVAL; | |
| return do_tkill(tgid, pid, sig); | |
| } | |
| /** | |
| * sys_tkill - send signal to one specific task | |
| * @pid: the PID of the task | |
| * @sig: signal to be sent | |
| * | |
| * Send a signal to only one task, even if it's a CLONE_THREAD task. | |
| */ | |
| SYSCALL_DEFINE2(tkill, pid_t, pid, int, sig) | |
| { | |
| /* This is only valid for single tasks */ | |
| if (pid <= 0) | |
| return -EINVAL; | |
| return do_tkill(0, pid, sig); | |
| } | |
| static int do_rt_sigqueueinfo(pid_t pid, int sig, kernel_siginfo_t *info) | |
| { | |
| if (si_code_reserved_to_kernel(info->si_code) && | |
| task_pid_vnr(current) != pid) | |
| return -EPERM; | |
| /* POSIX.1b doesn't mention process groups. */ | |
| return kill_proc_info(sig, info, pid); | |
| } | |
| /** | |
| * sys_rt_sigqueueinfo - send signal information to a signal | |
| * @pid: the PID of the thread | |
| * @sig: signal to be sent | |
| * @uinfo: signal info to be sent | |
| */ | |
| SYSCALL_DEFINE3(rt_sigqueueinfo, pid_t, pid, int, sig, | |
| siginfo_t __user *, uinfo) | |
| { | |
| kernel_siginfo_t info; | |
| int ret = __copy_siginfo_from_user(sig, &info, uinfo); | |
| if (unlikely(ret)) | |
| return ret; | |
| return do_rt_sigqueueinfo(pid, sig, &info); | |
| } | |
| #ifdef CONFIG_COMPAT | |
| COMPAT_SYSCALL_DEFINE3(rt_sigqueueinfo, | |
| compat_pid_t, pid, | |
| int, sig, | |
| struct compat_siginfo __user *, uinfo) | |
| { | |
| kernel_siginfo_t info; | |
| int ret = __copy_siginfo_from_user32(sig, &info, uinfo); | |
| if (unlikely(ret)) | |
| return ret; | |
| return do_rt_sigqueueinfo(pid, sig, &info); | |
| } | |
| #endif | |
| static int do_rt_tgsigqueueinfo(pid_t tgid, pid_t pid, int sig, kernel_siginfo_t *info) | |
| { | |
| /* This is only valid for single tasks */ | |
| if (pid <= 0 || tgid <= 0) | |
| return -EINVAL; | |
| if (si_code_reserved_to_kernel(info->si_code) && | |
| task_pid_vnr(current) != pid) | |
| return -EPERM; | |
| return do_send_specific(tgid, pid, sig, info); | |
| } | |
| SYSCALL_DEFINE4(rt_tgsigqueueinfo, pid_t, tgid, pid_t, pid, int, sig, | |
| siginfo_t __user *, uinfo) | |
| { | |
| kernel_siginfo_t info; | |
| int ret = __copy_siginfo_from_user(sig, &info, uinfo); | |
| if (unlikely(ret)) | |
| return ret; | |
| return do_rt_tgsigqueueinfo(tgid, pid, sig, &info); | |
| } | |
| #ifdef CONFIG_COMPAT | |
| COMPAT_SYSCALL_DEFINE4(rt_tgsigqueueinfo, | |
| compat_pid_t, tgid, | |
| compat_pid_t, pid, | |
| int, sig, | |
| struct compat_siginfo __user *, uinfo) | |
| { | |
| kernel_siginfo_t info; | |
| int ret = __copy_siginfo_from_user32(sig, &info, uinfo); | |
| if (unlikely(ret)) | |
| return ret; | |
| return do_rt_tgsigqueueinfo(tgid, pid, sig, &info); | |
| } | |
| #endif | |
| /* | |
| * For kthreads only, must not be used if cloned with CLONE_SIGHAND | |
| */ | |
| void kernel_sigaction(int sig, __sighandler_t action) | |
| { | |
| spin_lock_irq(¤t->sighand->siglock); | |
| current->sighand->action[sig - 1].sa.sa_handler = action; | |
| if (action == SIG_IGN) { | |
| sigset_t mask; | |
| sigemptyset(&mask); | |
| sigaddset(&mask, sig); | |
| flush_sigqueue_mask(current, &mask, ¤t->signal->shared_pending); | |
| flush_sigqueue_mask(current, &mask, ¤t->pending); | |
| recalc_sigpending(); | |
| } | |
| spin_unlock_irq(¤t->sighand->siglock); | |
| } | |
| EXPORT_SYMBOL(kernel_sigaction); | |
| void __weak sigaction_compat_abi(struct k_sigaction *act, | |
| struct k_sigaction *oact) | |
| { | |
| } | |
| int do_sigaction(int sig, struct k_sigaction *act, struct k_sigaction *oact) | |
| { | |
| struct task_struct *p = current, *t; | |
| struct k_sigaction *k; | |
| sigset_t mask; | |
| if (!valid_signal(sig) || sig < 1 || (act && sig_kernel_only(sig))) | |
| return -EINVAL; | |
| k = &p->sighand->action[sig-1]; | |
| spin_lock_irq(&p->sighand->siglock); | |
| if (k->sa.sa_flags & SA_IMMUTABLE) { | |
| spin_unlock_irq(&p->sighand->siglock); | |
| return -EINVAL; | |
| } | |
| if (oact) | |
| *oact = *k; | |
| /* | |
| * Make sure that we never accidentally claim to support SA_UNSUPPORTED, | |
| * e.g. by having an architecture use the bit in their uapi. | |
| */ | |
| BUILD_BUG_ON(UAPI_SA_FLAGS & SA_UNSUPPORTED); | |
| /* | |
| * Clear unknown flag bits in order to allow userspace to detect missing | |
| * support for flag bits and to allow the kernel to use non-uapi bits | |
| * internally. | |
| */ | |
| if (act) | |
| act->sa.sa_flags &= UAPI_SA_FLAGS; | |
| if (oact) | |
| oact->sa.sa_flags &= UAPI_SA_FLAGS; | |
| sigaction_compat_abi(act, oact); | |
| if (act) { | |
| bool was_ignored = k->sa.sa_handler == SIG_IGN; | |
| sigdelsetmask(&act->sa.sa_mask, | |
| sigmask(SIGKILL) | sigmask(SIGSTOP)); | |
| *k = *act; | |
| /* | |
| * POSIX 3.3.1.3: | |
| * "Setting a signal action to SIG_IGN for a signal that is | |
| * pending shall cause the pending signal to be discarded, | |
| * whether or not it is blocked." | |
| * | |
| * "Setting a signal action to SIG_DFL for a signal that is | |
| * pending and whose default action is to ignore the signal | |
| * (for example, SIGCHLD), shall cause the pending signal to | |
| * be discarded, whether or not it is blocked" | |
| */ | |
| if (sig_handler_ignored(sig_handler(p, sig), sig)) { | |
| sigemptyset(&mask); | |
| sigaddset(&mask, sig); | |
| flush_sigqueue_mask(p, &mask, &p->signal->shared_pending); | |
| for_each_thread(p, t) | |
| flush_sigqueue_mask(p, &mask, &t->pending); | |
| } else if (was_ignored) { | |
| posixtimer_sig_unignore(p, sig); | |
| } | |
| } | |
| spin_unlock_irq(&p->sighand->siglock); | |
| return 0; | |
| } | |
| #ifdef CONFIG_DYNAMIC_SIGFRAME | |
| static inline void sigaltstack_lock(void) | |
| __acquires(¤t->sighand->siglock) | |
| { | |
| spin_lock_irq(¤t->sighand->siglock); | |
| } | |
| static inline void sigaltstack_unlock(void) | |
| __releases(¤t->sighand->siglock) | |
| { | |
| spin_unlock_irq(¤t->sighand->siglock); | |
| } | |
| #else | |
| static inline void sigaltstack_lock(void) { } | |
| static inline void sigaltstack_unlock(void) { } | |
| #endif | |
| static int | |
| do_sigaltstack (const stack_t *ss, stack_t *oss, unsigned long sp, | |
| size_t min_ss_size) | |
| { | |
| struct task_struct *t = current; | |
| int ret = 0; | |
| if (oss) { | |
| memset(oss, 0, sizeof(stack_t)); | |
| oss->ss_sp = (void __user *) t->sas_ss_sp; | |
| oss->ss_size = t->sas_ss_size; | |
| oss->ss_flags = sas_ss_flags(sp) | | |
| (current->sas_ss_flags & SS_FLAG_BITS); | |
| } | |
| if (ss) { | |
| void __user *ss_sp = ss->ss_sp; | |
| size_t ss_size = ss->ss_size; | |
| unsigned ss_flags = ss->ss_flags; | |
| int ss_mode; | |
| if (unlikely(on_sig_stack(sp))) | |
| return -EPERM; | |
| ss_mode = ss_flags & ~SS_FLAG_BITS; | |
| if (unlikely(ss_mode != SS_DISABLE && ss_mode != SS_ONSTACK && | |
| ss_mode != 0)) | |
| return -EINVAL; | |
| /* | |
| * Return before taking any locks if no actual | |
| * sigaltstack changes were requested. | |
| */ | |
| if (t->sas_ss_sp == (unsigned long)ss_sp && | |
| t->sas_ss_size == ss_size && | |
| t->sas_ss_flags == ss_flags) | |
| return 0; | |
| sigaltstack_lock(); | |
| if (ss_mode == SS_DISABLE) { | |
| ss_size = 0; | |
| ss_sp = NULL; | |
| } else { | |
| if (unlikely(ss_size < min_ss_size)) | |
| ret = -ENOMEM; | |
| if (!sigaltstack_size_valid(ss_size)) | |
| ret = -ENOMEM; | |
| } | |
| if (!ret) { | |
| t->sas_ss_sp = (unsigned long) ss_sp; | |
| t->sas_ss_size = ss_size; | |
| t->sas_ss_flags = ss_flags; | |
| } | |
| sigaltstack_unlock(); | |
| } | |
| return ret; | |
| } | |
| SYSCALL_DEFINE2(sigaltstack,const stack_t __user *,uss, stack_t __user *,uoss) | |
| { | |
| stack_t new, old; | |
| int err; | |
| if (uss && copy_from_user(&new, uss, sizeof(stack_t))) | |
| return -EFAULT; | |
| err = do_sigaltstack(uss ? &new : NULL, uoss ? &old : NULL, | |
| current_user_stack_pointer(), | |
| MINSIGSTKSZ); | |
| if (!err && uoss && copy_to_user(uoss, &old, sizeof(stack_t))) | |
| err = -EFAULT; | |
| return err; | |
| } | |
| int restore_altstack(const stack_t __user *uss) | |
| { | |
| stack_t new; | |
| if (copy_from_user(&new, uss, sizeof(stack_t))) | |
| return -EFAULT; | |
| (void)do_sigaltstack(&new, NULL, current_user_stack_pointer(), | |
| MINSIGSTKSZ); | |
| /* squash all but EFAULT for now */ | |
| return 0; | |
| } | |
| int __save_altstack(stack_t __user *uss, unsigned long sp) | |
| { | |
| struct task_struct *t = current; | |
| int err = __put_user((void __user *)t->sas_ss_sp, &uss->ss_sp) | | |
| __put_user(t->sas_ss_flags, &uss->ss_flags) | | |
| __put_user(t->sas_ss_size, &uss->ss_size); | |
| return err; | |
| } | |
| #ifdef CONFIG_COMPAT | |
| static int do_compat_sigaltstack(const compat_stack_t __user *uss_ptr, | |
| compat_stack_t __user *uoss_ptr) | |
| { | |
| stack_t uss, uoss; | |
| int ret; | |
| if (uss_ptr) { | |
| compat_stack_t uss32; | |
| if (copy_from_user(&uss32, uss_ptr, sizeof(compat_stack_t))) | |
| return -EFAULT; | |
| uss.ss_sp = compat_ptr(uss32.ss_sp); | |
| uss.ss_flags = uss32.ss_flags; | |
| uss.ss_size = uss32.ss_size; | |
| } | |
| ret = do_sigaltstack(uss_ptr ? &uss : NULL, &uoss, | |
| compat_user_stack_pointer(), | |
| COMPAT_MINSIGSTKSZ); | |
| if (ret >= 0 && uoss_ptr) { | |
| compat_stack_t old; | |
| memset(&old, 0, sizeof(old)); | |
| old.ss_sp = ptr_to_compat(uoss.ss_sp); | |
| old.ss_flags = uoss.ss_flags; | |
| old.ss_size = uoss.ss_size; | |
| if (copy_to_user(uoss_ptr, &old, sizeof(compat_stack_t))) | |
| ret = -EFAULT; | |
| } | |
| return ret; | |
| } | |
| COMPAT_SYSCALL_DEFINE2(sigaltstack, | |
| const compat_stack_t __user *, uss_ptr, | |
| compat_stack_t __user *, uoss_ptr) | |
| { | |
| return do_compat_sigaltstack(uss_ptr, uoss_ptr); | |
| } | |
| int compat_restore_altstack(const compat_stack_t __user *uss) | |
| { | |
| int err = do_compat_sigaltstack(uss, NULL); | |
| /* squash all but -EFAULT for now */ | |
| return err == -EFAULT ? err : 0; | |
| } | |
| int __compat_save_altstack(compat_stack_t __user *uss, unsigned long sp) | |
| { | |
| int err; | |
| struct task_struct *t = current; | |
| err = __put_user(ptr_to_compat((void __user *)t->sas_ss_sp), | |
| &uss->ss_sp) | | |
| __put_user(t->sas_ss_flags, &uss->ss_flags) | | |
| __put_user(t->sas_ss_size, &uss->ss_size); | |
| return err; | |
| } | |
| #endif | |
| #ifdef __ARCH_WANT_SYS_SIGPENDING | |
| /** | |
| * sys_sigpending - examine pending signals | |
| * @uset: where mask of pending signal is returned | |
| */ | |
| SYSCALL_DEFINE1(sigpending, old_sigset_t __user *, uset) | |
| { | |
| sigset_t set; | |
| if (sizeof(old_sigset_t) > sizeof(*uset)) | |
| return -EINVAL; | |
| do_sigpending(&set); | |
| if (copy_to_user(uset, &set, sizeof(old_sigset_t))) | |
| return -EFAULT; | |
| return 0; | |
| } | |
| #ifdef CONFIG_COMPAT | |
| COMPAT_SYSCALL_DEFINE1(sigpending, compat_old_sigset_t __user *, set32) | |
| { | |
| sigset_t set; | |
| do_sigpending(&set); | |
| return put_user(set.sig[0], set32); | |
| } | |
| #endif | |
| #endif | |
| #ifdef __ARCH_WANT_SYS_SIGPROCMASK | |
| /** | |
| * sys_sigprocmask - examine and change blocked signals | |
| * @how: whether to add, remove, or set signals | |
| * @nset: signals to add or remove (if non-null) | |
| * @oset: previous value of signal mask if non-null | |
| * | |
| * Some platforms have their own version with special arguments; | |
| * others support only sys_rt_sigprocmask. | |
| */ | |
| SYSCALL_DEFINE3(sigprocmask, int, how, old_sigset_t __user *, nset, | |
| old_sigset_t __user *, oset) | |
| { | |
| old_sigset_t old_set, new_set; | |
| sigset_t new_blocked; | |
| old_set = current->blocked.sig[0]; | |
| if (nset) { | |
| if (copy_from_user(&new_set, nset, sizeof(*nset))) | |
| return -EFAULT; | |
| new_blocked = current->blocked; | |
| switch (how) { | |
| case SIG_BLOCK: | |
| sigaddsetmask(&new_blocked, new_set); | |
| break; | |
| case SIG_UNBLOCK: | |
| sigdelsetmask(&new_blocked, new_set); | |
| break; | |
| case SIG_SETMASK: | |
| new_blocked.sig[0] = new_set; | |
| break; | |
| default: | |
| return -EINVAL; | |
| } | |
| set_current_blocked(&new_blocked); | |
| } | |
| if (oset) { | |
| if (copy_to_user(oset, &old_set, sizeof(*oset))) | |
| return -EFAULT; | |
| } | |
| return 0; | |
| } | |
| #endif /* __ARCH_WANT_SYS_SIGPROCMASK */ | |
| #ifndef CONFIG_ODD_RT_SIGACTION | |
| /** | |
| * sys_rt_sigaction - alter an action taken by a process | |
| * @sig: signal to be sent | |
| * @act: new sigaction | |
| * @oact: used to save the previous sigaction | |
| * @sigsetsize: size of sigset_t type | |
| */ | |
| SYSCALL_DEFINE4(rt_sigaction, int, sig, | |
| const struct sigaction __user *, act, | |
| struct sigaction __user *, oact, | |
| size_t, sigsetsize) | |
| { | |
| struct k_sigaction new_sa, old_sa; | |
| int ret; | |
| /* XXX: Don't preclude handling different sized sigset_t's. */ | |
| if (sigsetsize != sizeof(sigset_t)) | |
| return -EINVAL; | |
| if (act && copy_from_user(&new_sa.sa, act, sizeof(new_sa.sa))) | |
| return -EFAULT; | |
| ret = do_sigaction(sig, act ? &new_sa : NULL, oact ? &old_sa : NULL); | |
| if (ret) | |
| return ret; | |
| if (oact && copy_to_user(oact, &old_sa.sa, sizeof(old_sa.sa))) | |
| return -EFAULT; | |
| return 0; | |
| } | |
| #ifdef CONFIG_COMPAT | |
| COMPAT_SYSCALL_DEFINE4(rt_sigaction, int, sig, | |
| const struct compat_sigaction __user *, act, | |
| struct compat_sigaction __user *, oact, | |
| compat_size_t, sigsetsize) | |
| { | |
| struct k_sigaction new_ka, old_ka; | |
| #ifdef __ARCH_HAS_SA_RESTORER | |
| compat_uptr_t restorer; | |
| #endif | |
| int ret; | |
| /* XXX: Don't preclude handling different sized sigset_t's. */ | |
| if (sigsetsize != sizeof(compat_sigset_t)) | |
| return -EINVAL; | |
| if (act) { | |
| compat_uptr_t handler; | |
| ret = get_user(handler, &act->sa_handler); | |
| new_ka.sa.sa_handler = compat_ptr(handler); | |
| #ifdef __ARCH_HAS_SA_RESTORER | |
| ret |= get_user(restorer, &act->sa_restorer); | |
| new_ka.sa.sa_restorer = compat_ptr(restorer); | |
| #endif | |
| ret |= get_compat_sigset(&new_ka.sa.sa_mask, &act->sa_mask); | |
| ret |= get_user(new_ka.sa.sa_flags, &act->sa_flags); | |
| if (ret) | |
| return -EFAULT; | |
| } | |
| ret = do_sigaction(sig, act ? &new_ka : NULL, oact ? &old_ka : NULL); | |
| if (!ret && oact) { | |
| ret = put_user(ptr_to_compat(old_ka.sa.sa_handler), | |
| &oact->sa_handler); | |
| ret |= put_compat_sigset(&oact->sa_mask, &old_ka.sa.sa_mask, | |
| sizeof(oact->sa_mask)); | |
| ret |= put_user(old_ka.sa.sa_flags, &oact->sa_flags); | |
| #ifdef __ARCH_HAS_SA_RESTORER | |
| ret |= put_user(ptr_to_compat(old_ka.sa.sa_restorer), | |
| &oact->sa_restorer); | |
| #endif | |
| } | |
| return ret; | |
| } | |
| #endif | |
| #endif /* !CONFIG_ODD_RT_SIGACTION */ | |
| #ifdef CONFIG_OLD_SIGACTION | |
| SYSCALL_DEFINE3(sigaction, int, sig, | |
| const struct old_sigaction __user *, act, | |
| struct old_sigaction __user *, oact) | |
| { | |
| struct k_sigaction new_ka, old_ka; | |
| int ret; | |
| if (act) { | |
| old_sigset_t mask; | |
| if (!access_ok(act, sizeof(*act)) || | |
| __get_user(new_ka.sa.sa_handler, &act->sa_handler) || | |
| __get_user(new_ka.sa.sa_restorer, &act->sa_restorer) || | |
| __get_user(new_ka.sa.sa_flags, &act->sa_flags) || | |
| __get_user(mask, &act->sa_mask)) | |
| return -EFAULT; | |
| #ifdef __ARCH_HAS_KA_RESTORER | |
| new_ka.ka_restorer = NULL; | |
| #endif | |
| siginitset(&new_ka.sa.sa_mask, mask); | |
| } | |
| ret = do_sigaction(sig, act ? &new_ka : NULL, oact ? &old_ka : NULL); | |
| if (!ret && oact) { | |
| if (!access_ok(oact, sizeof(*oact)) || | |
| __put_user(old_ka.sa.sa_handler, &oact->sa_handler) || | |
| __put_user(old_ka.sa.sa_restorer, &oact->sa_restorer) || | |
| __put_user(old_ka.sa.sa_flags, &oact->sa_flags) || | |
| __put_user(old_ka.sa.sa_mask.sig[0], &oact->sa_mask)) | |
| return -EFAULT; | |
| } | |
| return ret; | |
| } | |
| #endif | |
| #ifdef CONFIG_COMPAT_OLD_SIGACTION | |
| COMPAT_SYSCALL_DEFINE3(sigaction, int, sig, | |
| const struct compat_old_sigaction __user *, act, | |
| struct compat_old_sigaction __user *, oact) | |
| { | |
| struct k_sigaction new_ka, old_ka; | |
| int ret; | |
| compat_old_sigset_t mask; | |
| compat_uptr_t handler, restorer; | |
| if (act) { | |
| if (!access_ok(act, sizeof(*act)) || | |
| __get_user(handler, &act->sa_handler) || | |
| __get_user(restorer, &act->sa_restorer) || | |
| __get_user(new_ka.sa.sa_flags, &act->sa_flags) || | |
| __get_user(mask, &act->sa_mask)) | |
| return -EFAULT; | |
| #ifdef __ARCH_HAS_KA_RESTORER | |
| new_ka.ka_restorer = NULL; | |
| #endif | |
| new_ka.sa.sa_handler = compat_ptr(handler); | |
| new_ka.sa.sa_restorer = compat_ptr(restorer); | |
| siginitset(&new_ka.sa.sa_mask, mask); | |
| } | |
| ret = do_sigaction(sig, act ? &new_ka : NULL, oact ? &old_ka : NULL); | |
| if (!ret && oact) { | |
| if (!access_ok(oact, sizeof(*oact)) || | |
| __put_user(ptr_to_compat(old_ka.sa.sa_handler), | |
| &oact->sa_handler) || | |
| __put_user(ptr_to_compat(old_ka.sa.sa_restorer), | |
| &oact->sa_restorer) || | |
| __put_user(old_ka.sa.sa_flags, &oact->sa_flags) || | |
| __put_user(old_ka.sa.sa_mask.sig[0], &oact->sa_mask)) | |
| return -EFAULT; | |
| } | |
| return ret; | |
| } | |
| #endif | |
| #ifdef CONFIG_SGETMASK_SYSCALL | |
| /* | |
| * For backwards compatibility. Functionality superseded by sigprocmask. | |
| */ | |
| SYSCALL_DEFINE0(sgetmask) | |
| { | |
| /* SMP safe */ | |
| return current->blocked.sig[0]; | |
| } | |
| SYSCALL_DEFINE1(ssetmask, int, newmask) | |
| { | |
| int old = current->blocked.sig[0]; | |
| sigset_t newset; | |
| siginitset(&newset, newmask); | |
| set_current_blocked(&newset); | |
| return old; | |
| } | |
| #endif /* CONFIG_SGETMASK_SYSCALL */ | |
| #ifdef __ARCH_WANT_SYS_SIGNAL | |
| /* | |
| * For backwards compatibility. Functionality superseded by sigaction. | |
| */ | |
| SYSCALL_DEFINE2(signal, int, sig, __sighandler_t, handler) | |
| { | |
| struct k_sigaction new_sa, old_sa; | |
| int ret; | |
| new_sa.sa.sa_handler = handler; | |
| new_sa.sa.sa_flags = SA_ONESHOT | SA_NOMASK; | |
| sigemptyset(&new_sa.sa.sa_mask); | |
| ret = do_sigaction(sig, &new_sa, &old_sa); | |
| return ret ? ret : (unsigned long)old_sa.sa.sa_handler; | |
| } | |
| #endif /* __ARCH_WANT_SYS_SIGNAL */ | |
| #ifdef __ARCH_WANT_SYS_PAUSE | |
| SYSCALL_DEFINE0(pause) | |
| { | |
| while (!signal_pending(current)) { | |
| __set_current_state(TASK_INTERRUPTIBLE); | |
| schedule(); | |
| } | |
| return -ERESTARTNOHAND; | |
| } | |
| #endif | |
| static int sigsuspend(sigset_t *set) | |
| { | |
| current->saved_sigmask = current->blocked; | |
| set_current_blocked(set); | |
| while (!signal_pending(current)) { | |
| __set_current_state(TASK_INTERRUPTIBLE); | |
| schedule(); | |
| } | |
| set_restore_sigmask(); | |
| return -ERESTARTNOHAND; | |
| } | |
| /** | |
| * sys_rt_sigsuspend - replace the signal mask for a value with the | |
| * @unewset value until a signal is received | |
| * @unewset: new signal mask value | |
| * @sigsetsize: size of sigset_t type | |
| */ | |
| SYSCALL_DEFINE2(rt_sigsuspend, sigset_t __user *, unewset, size_t, sigsetsize) | |
| { | |
| sigset_t newset; | |
| /* XXX: Don't preclude handling different sized sigset_t's. */ | |
| if (sigsetsize != sizeof(sigset_t)) | |
| return -EINVAL; | |
| if (copy_from_user(&newset, unewset, sizeof(newset))) | |
| return -EFAULT; | |
| return sigsuspend(&newset); | |
| } | |
| #ifdef CONFIG_COMPAT | |
| COMPAT_SYSCALL_DEFINE2(rt_sigsuspend, compat_sigset_t __user *, unewset, compat_size_t, sigsetsize) | |
| { | |
| sigset_t newset; | |
| /* XXX: Don't preclude handling different sized sigset_t's. */ | |
| if (sigsetsize != sizeof(sigset_t)) | |
| return -EINVAL; | |
| if (get_compat_sigset(&newset, unewset)) | |
| return -EFAULT; | |
| return sigsuspend(&newset); | |
| } | |
| #endif | |
| #ifdef CONFIG_OLD_SIGSUSPEND | |
| SYSCALL_DEFINE1(sigsuspend, old_sigset_t, mask) | |
| { | |
| sigset_t blocked; | |
| siginitset(&blocked, mask); | |
| return sigsuspend(&blocked); | |
| } | |
| #endif | |
| #ifdef CONFIG_OLD_SIGSUSPEND3 | |
| SYSCALL_DEFINE3(sigsuspend, int, unused1, int, unused2, old_sigset_t, mask) | |
| { | |
| sigset_t blocked; | |
| siginitset(&blocked, mask); | |
| return sigsuspend(&blocked); | |
| } | |
| #endif | |
| __weak const char *arch_vma_name(struct vm_area_struct *vma) | |
| { | |
| return NULL; | |
| } | |
| static inline void siginfo_buildtime_checks(void) | |
| { | |
| BUILD_BUG_ON(sizeof(struct siginfo) != SI_MAX_SIZE); | |
| /* Verify the offsets in the two siginfos match */ | |
| #define CHECK_OFFSET(field) \ | |
| BUILD_BUG_ON(offsetof(siginfo_t, field) != offsetof(kernel_siginfo_t, field)) | |
| /* kill */ | |
| CHECK_OFFSET(si_pid); | |
| CHECK_OFFSET(si_uid); | |
| /* timer */ | |
| CHECK_OFFSET(si_tid); | |
| CHECK_OFFSET(si_overrun); | |
| CHECK_OFFSET(si_value); | |
| /* rt */ | |
| CHECK_OFFSET(si_pid); | |
| CHECK_OFFSET(si_uid); | |
| CHECK_OFFSET(si_value); | |
| /* sigchld */ | |
| CHECK_OFFSET(si_pid); | |
| CHECK_OFFSET(si_uid); | |
| CHECK_OFFSET(si_status); | |
| CHECK_OFFSET(si_utime); | |
| CHECK_OFFSET(si_stime); | |
| /* sigfault */ | |
| CHECK_OFFSET(si_addr); | |
| CHECK_OFFSET(si_trapno); | |
| CHECK_OFFSET(si_addr_lsb); | |
| CHECK_OFFSET(si_lower); | |
| CHECK_OFFSET(si_upper); | |
| CHECK_OFFSET(si_pkey); | |
| CHECK_OFFSET(si_perf_data); | |
| CHECK_OFFSET(si_perf_type); | |
| CHECK_OFFSET(si_perf_flags); | |
| /* sigpoll */ | |
| CHECK_OFFSET(si_band); | |
| CHECK_OFFSET(si_fd); | |
| /* sigsys */ | |
| CHECK_OFFSET(si_call_addr); | |
| CHECK_OFFSET(si_syscall); | |
| CHECK_OFFSET(si_arch); | |
| #undef CHECK_OFFSET | |
| /* usb asyncio */ | |
| BUILD_BUG_ON(offsetof(struct siginfo, si_pid) != | |
| offsetof(struct siginfo, si_addr)); | |
| if (sizeof(int) == sizeof(void __user *)) { | |
| BUILD_BUG_ON(sizeof_field(struct siginfo, si_pid) != | |
| sizeof(void __user *)); | |
| } else { | |
| BUILD_BUG_ON((sizeof_field(struct siginfo, si_pid) + | |
| sizeof_field(struct siginfo, si_uid)) != | |
| sizeof(void __user *)); | |
| BUILD_BUG_ON(offsetofend(struct siginfo, si_pid) != | |
| offsetof(struct siginfo, si_uid)); | |
| } | |
| #ifdef CONFIG_COMPAT | |
| BUILD_BUG_ON(offsetof(struct compat_siginfo, si_pid) != | |
| offsetof(struct compat_siginfo, si_addr)); | |
| BUILD_BUG_ON(sizeof_field(struct compat_siginfo, si_pid) != | |
| sizeof(compat_uptr_t)); | |
| BUILD_BUG_ON(sizeof_field(struct compat_siginfo, si_pid) != | |
| sizeof_field(struct siginfo, si_pid)); | |
| #endif | |
| } | |
| #if defined(CONFIG_SYSCTL) | |
| static const struct ctl_table signal_debug_table[] = { | |
| #ifdef CONFIG_SYSCTL_EXCEPTION_TRACE | |
| { | |
| .procname = "exception-trace", | |
| .data = &show_unhandled_signals, | |
| .maxlen = sizeof(int), | |
| .mode = 0644, | |
| .proc_handler = proc_dointvec | |
| }, | |
| #endif | |
| }; | |
| static const struct ctl_table signal_table[] = { | |
| { | |
| .procname = "print-fatal-signals", | |
| .data = &print_fatal_signals, | |
| .maxlen = sizeof(int), | |
| .mode = 0644, | |
| .proc_handler = proc_dointvec, | |
| }, | |
| }; | |
| static int __init init_signal_sysctls(void) | |
| { | |
| register_sysctl_init("debug", signal_debug_table); | |
| register_sysctl_init("kernel", signal_table); | |
| return 0; | |
| } | |
| early_initcall(init_signal_sysctls); | |
| #endif /* CONFIG_SYSCTL */ | |
| void __init signals_init(void) | |
| { | |
| siginfo_buildtime_checks(); | |
| sigqueue_cachep = KMEM_CACHE(sigqueue, SLAB_PANIC | SLAB_ACCOUNT); | |
| } | |
| #ifdef CONFIG_KGDB_KDB | |
| #include <linux/kdb.h> | |
| /* | |
| * kdb_send_sig - Allows kdb to send signals without exposing | |
| * signal internals. This function checks if the required locks are | |
| * available before calling the main signal code, to avoid kdb | |
| * deadlocks. | |
| */ | |
| void kdb_send_sig(struct task_struct *t, int sig) | |
| { | |
| static struct task_struct *kdb_prev_t; | |
| int new_t, ret; | |
| if (!spin_trylock(&t->sighand->siglock)) { | |
| kdb_printf("Can't do kill command now.\n" | |
| "The sigmask lock is held somewhere else in " | |
| "kernel, try again later\n"); | |
| return; | |
| } | |
| new_t = kdb_prev_t != t; | |
| kdb_prev_t = t; | |
| if (!task_is_running(t) && new_t) { | |
| spin_unlock(&t->sighand->siglock); | |
| kdb_printf("Process is not RUNNING, sending a signal from " | |
| "kdb risks deadlock\n" | |
| "on the run queue locks. " | |
| "The signal has _not_ been sent.\n" | |
| "Reissue the kill command if you want to risk " | |
| "the deadlock.\n"); | |
| return; | |
| } | |
| ret = send_signal_locked(sig, SEND_SIG_PRIV, t, PIDTYPE_PID); | |
| spin_unlock(&t->sighand->siglock); | |
| if (ret) | |
| kdb_printf("Fail to deliver Signal %d to process %d.\n", | |
| sig, t->pid); | |
| else | |
| kdb_printf("Signal %d is sent to process %d.\n", sig, t->pid); | |
| } | |
| #endif /* CONFIG_KGDB_KDB */ |