| /* SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause */ | |
| /* | |
| * Copyright (c) Meta Platforms, Inc. and affiliates. | |
| * All rights reserved. | |
| * | |
| * This source code is licensed under both the BSD-style license (found in the | |
| * LICENSE file in the root directory of this source tree) and the GPLv2 (found | |
| * in the COPYING file in the root directory of this source tree). | |
| * You may select, at your option, one of the above-listed licenses. | |
| */ | |
| /* This header contains definitions | |
| * that shall **only** be used by modules within lib/compress. | |
| */ | |
| #ifndef ZSTD_COMPRESS_H | |
| #define ZSTD_COMPRESS_H | |
| /*-************************************* | |
| * Dependencies | |
| ***************************************/ | |
| #include "../common/zstd_internal.h" | |
| #include "zstd_cwksp.h" | |
| #include "../common/bits.h" /* ZSTD_highbit32, ZSTD_NbCommonBytes */ | |
| #include "zstd_preSplit.h" /* ZSTD_SLIPBLOCK_WORKSPACESIZE */ | |
| /*-************************************* | |
| * Constants | |
| ***************************************/ | |
| #define kSearchStrength 8 | |
| #define HASH_READ_SIZE 8 | |
| #define ZSTD_DUBT_UNSORTED_MARK 1 /* For btlazy2 strategy, index ZSTD_DUBT_UNSORTED_MARK==1 means "unsorted". | |
| It could be confused for a real successor at index "1", if sorted as larger than its predecessor. | |
| It's not a big deal though : candidate will just be sorted again. | |
| Additionally, candidate position 1 will be lost. | |
| But candidate 1 cannot hide a large tree of candidates, so it's a minimal loss. | |
| The benefit is that ZSTD_DUBT_UNSORTED_MARK cannot be mishandled after table reuse with a different strategy. | |
| This constant is required by ZSTD_compressBlock_btlazy2() and ZSTD_reduceTable_internal() */ | |
| /*-************************************* | |
| * Context memory management | |
| ***************************************/ | |
| typedef enum { ZSTDcs_created=0, ZSTDcs_init, ZSTDcs_ongoing, ZSTDcs_ending } ZSTD_compressionStage_e; | |
| typedef enum { zcss_init=0, zcss_load, zcss_flush } ZSTD_cStreamStage; | |
| typedef struct ZSTD_prefixDict_s { | |
| const void* dict; | |
| size_t dictSize; | |
| ZSTD_dictContentType_e dictContentType; | |
| } ZSTD_prefixDict; | |
| typedef struct { | |
| void* dictBuffer; | |
| void const* dict; | |
| size_t dictSize; | |
| ZSTD_dictContentType_e dictContentType; | |
| ZSTD_CDict* cdict; | |
| } ZSTD_localDict; | |
| typedef struct { | |
| HUF_CElt CTable[HUF_CTABLE_SIZE_ST(255)]; | |
| HUF_repeat repeatMode; | |
| } ZSTD_hufCTables_t; | |
| typedef struct { | |
| FSE_CTable offcodeCTable[FSE_CTABLE_SIZE_U32(OffFSELog, MaxOff)]; | |
| FSE_CTable matchlengthCTable[FSE_CTABLE_SIZE_U32(MLFSELog, MaxML)]; | |
| FSE_CTable litlengthCTable[FSE_CTABLE_SIZE_U32(LLFSELog, MaxLL)]; | |
| FSE_repeat offcode_repeatMode; | |
| FSE_repeat matchlength_repeatMode; | |
| FSE_repeat litlength_repeatMode; | |
| } ZSTD_fseCTables_t; | |
| typedef struct { | |
| ZSTD_hufCTables_t huf; | |
| ZSTD_fseCTables_t fse; | |
| } ZSTD_entropyCTables_t; | |
| /* ********************************************* | |
| * Sequences * | |
| ***********************************************/ | |
| typedef struct SeqDef_s { | |
| U32 offBase; /* offBase == Offset + ZSTD_REP_NUM, or repcode 1,2,3 */ | |
| U16 litLength; | |
| U16 mlBase; /* mlBase == matchLength - MINMATCH */ | |
| } SeqDef; | |
| /* Controls whether seqStore has a single "long" litLength or matchLength. See SeqStore_t. */ | |
| typedef enum { | |
| ZSTD_llt_none = 0, /* no longLengthType */ | |
| ZSTD_llt_literalLength = 1, /* represents a long literal */ | |
| ZSTD_llt_matchLength = 2 /* represents a long match */ | |
| } ZSTD_longLengthType_e; | |
| typedef struct { | |
| SeqDef* sequencesStart; | |
| SeqDef* sequences; /* ptr to end of sequences */ | |
| BYTE* litStart; | |
| BYTE* lit; /* ptr to end of literals */ | |
| BYTE* llCode; | |
| BYTE* mlCode; | |
| BYTE* ofCode; | |
| size_t maxNbSeq; | |
| size_t maxNbLit; | |
| /* longLengthPos and longLengthType to allow us to represent either a single litLength or matchLength | |
| * in the seqStore that has a value larger than U16 (if it exists). To do so, we increment | |
| * the existing value of the litLength or matchLength by 0x10000. | |
| */ | |
| ZSTD_longLengthType_e longLengthType; | |
| U32 longLengthPos; /* Index of the sequence to apply long length modification to */ | |
| } SeqStore_t; | |
| typedef struct { | |
| U32 litLength; | |
| U32 matchLength; | |
| } ZSTD_SequenceLength; | |
| /* | |
| * Returns the ZSTD_SequenceLength for the given sequences. It handles the decoding of long sequences | |
| * indicated by longLengthPos and longLengthType, and adds MINMATCH back to matchLength. | |
| */ | |
| MEM_STATIC ZSTD_SequenceLength ZSTD_getSequenceLength(SeqStore_t const* seqStore, SeqDef const* seq) | |
| { | |
| ZSTD_SequenceLength seqLen; | |
| seqLen.litLength = seq->litLength; | |
| seqLen.matchLength = seq->mlBase + MINMATCH; | |
| if (seqStore->longLengthPos == (U32)(seq - seqStore->sequencesStart)) { | |
| if (seqStore->longLengthType == ZSTD_llt_literalLength) { | |
| seqLen.litLength += 0x10000; | |
| } | |
| if (seqStore->longLengthType == ZSTD_llt_matchLength) { | |
| seqLen.matchLength += 0x10000; | |
| } | |
| } | |
| return seqLen; | |
| } | |
| const SeqStore_t* ZSTD_getSeqStore(const ZSTD_CCtx* ctx); /* compress & dictBuilder */ | |
| int ZSTD_seqToCodes(const SeqStore_t* seqStorePtr); /* compress, dictBuilder, decodeCorpus (shouldn't get its definition from here) */ | |
| /* ********************************************* | |
| * Entropy buffer statistics structs and funcs * | |
| ***********************************************/ | |
| /* ZSTD_hufCTablesMetadata_t : | |
| * Stores Literals Block Type for a super-block in hType, and | |
| * huffman tree description in hufDesBuffer. | |
| * hufDesSize refers to the size of huffman tree description in bytes. | |
| * This metadata is populated in ZSTD_buildBlockEntropyStats_literals() */ | |
| typedef struct { | |
| SymbolEncodingType_e hType; | |
| BYTE hufDesBuffer[ZSTD_MAX_HUF_HEADER_SIZE]; | |
| size_t hufDesSize; | |
| } ZSTD_hufCTablesMetadata_t; | |
| /* ZSTD_fseCTablesMetadata_t : | |
| * Stores symbol compression modes for a super-block in {ll, ol, ml}Type, and | |
| * fse tables in fseTablesBuffer. | |
| * fseTablesSize refers to the size of fse tables in bytes. | |
| * This metadata is populated in ZSTD_buildBlockEntropyStats_sequences() */ | |
| typedef struct { | |
| SymbolEncodingType_e llType; | |
| SymbolEncodingType_e ofType; | |
| SymbolEncodingType_e mlType; | |
| BYTE fseTablesBuffer[ZSTD_MAX_FSE_HEADERS_SIZE]; | |
| size_t fseTablesSize; | |
| size_t lastCountSize; /* This is to account for bug in 1.3.4. More detail in ZSTD_entropyCompressSeqStore_internal() */ | |
| } ZSTD_fseCTablesMetadata_t; | |
| typedef struct { | |
| ZSTD_hufCTablesMetadata_t hufMetadata; | |
| ZSTD_fseCTablesMetadata_t fseMetadata; | |
| } ZSTD_entropyCTablesMetadata_t; | |
| /* ZSTD_buildBlockEntropyStats() : | |
| * Builds entropy for the block. | |
| * @return : 0 on success or error code */ | |
| size_t ZSTD_buildBlockEntropyStats( | |
| const SeqStore_t* seqStorePtr, | |
| const ZSTD_entropyCTables_t* prevEntropy, | |
| ZSTD_entropyCTables_t* nextEntropy, | |
| const ZSTD_CCtx_params* cctxParams, | |
| ZSTD_entropyCTablesMetadata_t* entropyMetadata, | |
| void* workspace, size_t wkspSize); | |
| /* ******************************* | |
| * Compression internals structs * | |
| *********************************/ | |
| typedef struct { | |
| U32 off; /* Offset sumtype code for the match, using ZSTD_storeSeq() format */ | |
| U32 len; /* Raw length of match */ | |
| } ZSTD_match_t; | |
| typedef struct { | |
| U32 offset; /* Offset of sequence */ | |
| U32 litLength; /* Length of literals prior to match */ | |
| U32 matchLength; /* Raw length of match */ | |
| } rawSeq; | |
| typedef struct { | |
| rawSeq* seq; /* The start of the sequences */ | |
| size_t pos; /* The index in seq where reading stopped. pos <= size. */ | |
| size_t posInSequence; /* The position within the sequence at seq[pos] where reading | |
| stopped. posInSequence <= seq[pos].litLength + seq[pos].matchLength */ | |
| size_t size; /* The number of sequences. <= capacity. */ | |
| size_t capacity; /* The capacity starting from `seq` pointer */ | |
| } RawSeqStore_t; | |
| UNUSED_ATTR static const RawSeqStore_t kNullRawSeqStore = {NULL, 0, 0, 0, 0}; | |
| typedef struct { | |
| int price; /* price from beginning of segment to this position */ | |
| U32 off; /* offset of previous match */ | |
| U32 mlen; /* length of previous match */ | |
| U32 litlen; /* nb of literals since previous match */ | |
| U32 rep[ZSTD_REP_NUM]; /* offset history after previous match */ | |
| } ZSTD_optimal_t; | |
| typedef enum { zop_dynamic=0, zop_predef } ZSTD_OptPrice_e; | |
| #define ZSTD_OPT_SIZE (ZSTD_OPT_NUM+3) | |
| typedef struct { | |
| /* All tables are allocated inside cctx->workspace by ZSTD_resetCCtx_internal() */ | |
| unsigned* litFreq; /* table of literals statistics, of size 256 */ | |
| unsigned* litLengthFreq; /* table of litLength statistics, of size (MaxLL+1) */ | |
| unsigned* matchLengthFreq; /* table of matchLength statistics, of size (MaxML+1) */ | |
| unsigned* offCodeFreq; /* table of offCode statistics, of size (MaxOff+1) */ | |
| ZSTD_match_t* matchTable; /* list of found matches, of size ZSTD_OPT_SIZE */ | |
| ZSTD_optimal_t* priceTable; /* All positions tracked by optimal parser, of size ZSTD_OPT_SIZE */ | |
| U32 litSum; /* nb of literals */ | |
| U32 litLengthSum; /* nb of litLength codes */ | |
| U32 matchLengthSum; /* nb of matchLength codes */ | |
| U32 offCodeSum; /* nb of offset codes */ | |
| U32 litSumBasePrice; /* to compare to log2(litfreq) */ | |
| U32 litLengthSumBasePrice; /* to compare to log2(llfreq) */ | |
| U32 matchLengthSumBasePrice;/* to compare to log2(mlfreq) */ | |
| U32 offCodeSumBasePrice; /* to compare to log2(offreq) */ | |
| ZSTD_OptPrice_e priceType; /* prices can be determined dynamically, or follow a pre-defined cost structure */ | |
| const ZSTD_entropyCTables_t* symbolCosts; /* pre-calculated dictionary statistics */ | |
| ZSTD_ParamSwitch_e literalCompressionMode; | |
| } optState_t; | |
| typedef struct { | |
| ZSTD_entropyCTables_t entropy; | |
| U32 rep[ZSTD_REP_NUM]; | |
| } ZSTD_compressedBlockState_t; | |
| typedef struct { | |
| BYTE const* nextSrc; /* next block here to continue on current prefix */ | |
| BYTE const* base; /* All regular indexes relative to this position */ | |
| BYTE const* dictBase; /* extDict indexes relative to this position */ | |
| U32 dictLimit; /* below that point, need extDict */ | |
| U32 lowLimit; /* below that point, no more valid data */ | |
| U32 nbOverflowCorrections; /* Number of times overflow correction has run since | |
| * ZSTD_window_init(). Useful for debugging coredumps | |
| * and for ZSTD_WINDOW_OVERFLOW_CORRECT_FREQUENTLY. | |
| */ | |
| } ZSTD_window_t; | |
| #define ZSTD_WINDOW_START_INDEX 2 | |
| typedef struct ZSTD_MatchState_t ZSTD_MatchState_t; | |
| #define ZSTD_ROW_HASH_CACHE_SIZE 8 /* Size of prefetching hash cache for row-based matchfinder */ | |
| struct ZSTD_MatchState_t { | |
| ZSTD_window_t window; /* State for window round buffer management */ | |
| U32 loadedDictEnd; /* index of end of dictionary, within context's referential. | |
| * When loadedDictEnd != 0, a dictionary is in use, and still valid. | |
| * This relies on a mechanism to set loadedDictEnd=0 when dictionary is no longer within distance. | |
| * Such mechanism is provided within ZSTD_window_enforceMaxDist() and ZSTD_checkDictValidity(). | |
| * When dict referential is copied into active context (i.e. not attached), | |
| * loadedDictEnd == dictSize, since referential starts from zero. | |
| */ | |
| U32 nextToUpdate; /* index from which to continue table update */ | |
| U32 hashLog3; /* dispatch table for matches of len==3 : larger == faster, more memory */ | |
| U32 rowHashLog; /* For row-based matchfinder: Hashlog based on nb of rows in the hashTable.*/ | |
| BYTE* tagTable; /* For row-based matchFinder: A row-based table containing the hashes and head index. */ | |
| U32 hashCache[ZSTD_ROW_HASH_CACHE_SIZE]; /* For row-based matchFinder: a cache of hashes to improve speed */ | |
| U64 hashSalt; /* For row-based matchFinder: salts the hash for reuse of tag table */ | |
| U32 hashSaltEntropy; /* For row-based matchFinder: collects entropy for salt generation */ | |
| U32* hashTable; | |
| U32* hashTable3; | |
| U32* chainTable; | |
| int forceNonContiguous; /* Non-zero if we should force non-contiguous load for the next window update. */ | |
| int dedicatedDictSearch; /* Indicates whether this matchState is using the | |
| * dedicated dictionary search structure. | |
| */ | |
| optState_t opt; /* optimal parser state */ | |
| const ZSTD_MatchState_t* dictMatchState; | |
| ZSTD_compressionParameters cParams; | |
| const RawSeqStore_t* ldmSeqStore; | |
| /* Controls prefetching in some dictMatchState matchfinders. | |
| * This behavior is controlled from the cctx ms. | |
| * This parameter has no effect in the cdict ms. */ | |
| int prefetchCDictTables; | |
| /* When == 0, lazy match finders insert every position. | |
| * When != 0, lazy match finders only insert positions they search. | |
| * This allows them to skip much faster over incompressible data, | |
| * at a small cost to compression ratio. | |
| */ | |
| int lazySkipping; | |
| }; | |
| typedef struct { | |
| ZSTD_compressedBlockState_t* prevCBlock; | |
| ZSTD_compressedBlockState_t* nextCBlock; | |
| ZSTD_MatchState_t matchState; | |
| } ZSTD_blockState_t; | |
| typedef struct { | |
| U32 offset; | |
| U32 checksum; | |
| } ldmEntry_t; | |
| typedef struct { | |
| BYTE const* split; | |
| U32 hash; | |
| U32 checksum; | |
| ldmEntry_t* bucket; | |
| } ldmMatchCandidate_t; | |
| #define LDM_BATCH_SIZE 64 | |
| typedef struct { | |
| ZSTD_window_t window; /* State for the window round buffer management */ | |
| ldmEntry_t* hashTable; | |
| U32 loadedDictEnd; | |
| BYTE* bucketOffsets; /* Next position in bucket to insert entry */ | |
| size_t splitIndices[LDM_BATCH_SIZE]; | |
| ldmMatchCandidate_t matchCandidates[LDM_BATCH_SIZE]; | |
| } ldmState_t; | |
| typedef struct { | |
| ZSTD_ParamSwitch_e enableLdm; /* ZSTD_ps_enable to enable LDM. ZSTD_ps_auto by default */ | |
| U32 hashLog; /* Log size of hashTable */ | |
| U32 bucketSizeLog; /* Log bucket size for collision resolution, at most 8 */ | |
| U32 minMatchLength; /* Minimum match length */ | |
| U32 hashRateLog; /* Log number of entries to skip */ | |
| U32 windowLog; /* Window log for the LDM */ | |
| } ldmParams_t; | |
| typedef struct { | |
| int collectSequences; | |
| ZSTD_Sequence* seqStart; | |
| size_t seqIndex; | |
| size_t maxSequences; | |
| } SeqCollector; | |
| struct ZSTD_CCtx_params_s { | |
| ZSTD_format_e format; | |
| ZSTD_compressionParameters cParams; | |
| ZSTD_frameParameters fParams; | |
| int compressionLevel; | |
| int forceWindow; /* force back-references to respect limit of | |
| * 1<<wLog, even for dictionary */ | |
| size_t targetCBlockSize; /* Tries to fit compressed block size to be around targetCBlockSize. | |
| * No target when targetCBlockSize == 0. | |
| * There is no guarantee on compressed block size */ | |
| int srcSizeHint; /* User's best guess of source size. | |
| * Hint is not valid when srcSizeHint == 0. | |
| * There is no guarantee that hint is close to actual source size */ | |
| ZSTD_dictAttachPref_e attachDictPref; | |
| ZSTD_ParamSwitch_e literalCompressionMode; | |
| /* Multithreading: used to pass parameters to mtctx */ | |
| int nbWorkers; | |
| size_t jobSize; | |
| int overlapLog; | |
| int rsyncable; | |
| /* Long distance matching parameters */ | |
| ldmParams_t ldmParams; | |
| /* Dedicated dict search algorithm trigger */ | |
| int enableDedicatedDictSearch; | |
| /* Input/output buffer modes */ | |
| ZSTD_bufferMode_e inBufferMode; | |
| ZSTD_bufferMode_e outBufferMode; | |
| /* Sequence compression API */ | |
| ZSTD_SequenceFormat_e blockDelimiters; | |
| int validateSequences; | |
| /* Block splitting | |
| * @postBlockSplitter executes split analysis after sequences are produced, | |
| * it's more accurate but consumes more resources. | |
| * @preBlockSplitter_level splits before knowing sequences, | |
| * it's more approximative but also cheaper. | |
| * Valid @preBlockSplitter_level values range from 0 to 6 (included). | |
| * 0 means auto, 1 means do not split, | |
| * then levels are sorted in increasing cpu budget, from 2 (fastest) to 6 (slowest). | |
| * Highest @preBlockSplitter_level combines well with @postBlockSplitter. | |
| */ | |
| ZSTD_ParamSwitch_e postBlockSplitter; | |
| int preBlockSplitter_level; | |
| /* Adjust the max block size*/ | |
| size_t maxBlockSize; | |
| /* Param for deciding whether to use row-based matchfinder */ | |
| ZSTD_ParamSwitch_e useRowMatchFinder; | |
| /* Always load a dictionary in ext-dict mode (not prefix mode)? */ | |
| int deterministicRefPrefix; | |
| /* Internal use, for createCCtxParams() and freeCCtxParams() only */ | |
| ZSTD_customMem customMem; | |
| /* Controls prefetching in some dictMatchState matchfinders */ | |
| ZSTD_ParamSwitch_e prefetchCDictTables; | |
| /* Controls whether zstd will fall back to an internal matchfinder | |
| * if the external matchfinder returns an error code. */ | |
| int enableMatchFinderFallback; | |
| /* Parameters for the external sequence producer API. | |
| * Users set these parameters through ZSTD_registerSequenceProducer(). | |
| * It is not possible to set these parameters individually through the public API. */ | |
| void* extSeqProdState; | |
| ZSTD_sequenceProducer_F extSeqProdFunc; | |
| /* Controls repcode search in external sequence parsing */ | |
| ZSTD_ParamSwitch_e searchForExternalRepcodes; | |
| }; /* typedef'd to ZSTD_CCtx_params within "zstd.h" */ | |
| #define COMPRESS_SEQUENCES_WORKSPACE_SIZE (sizeof(unsigned) * (MaxSeq + 2)) | |
| #define ENTROPY_WORKSPACE_SIZE (HUF_WORKSPACE_SIZE + COMPRESS_SEQUENCES_WORKSPACE_SIZE) | |
| #define TMP_WORKSPACE_SIZE (MAX(ENTROPY_WORKSPACE_SIZE, ZSTD_SLIPBLOCK_WORKSPACESIZE)) | |
| /* | |
| * Indicates whether this compression proceeds directly from user-provided | |
| * source buffer to user-provided destination buffer (ZSTDb_not_buffered), or | |
| * whether the context needs to buffer the input/output (ZSTDb_buffered). | |
| */ | |
| typedef enum { | |
| ZSTDb_not_buffered, | |
| ZSTDb_buffered | |
| } ZSTD_buffered_policy_e; | |
| /* | |
| * Struct that contains all elements of block splitter that should be allocated | |
| * in a wksp. | |
| */ | |
| #define ZSTD_MAX_NB_BLOCK_SPLITS 196 | |
| typedef struct { | |
| SeqStore_t fullSeqStoreChunk; | |
| SeqStore_t firstHalfSeqStore; | |
| SeqStore_t secondHalfSeqStore; | |
| SeqStore_t currSeqStore; | |
| SeqStore_t nextSeqStore; | |
| U32 partitions[ZSTD_MAX_NB_BLOCK_SPLITS]; | |
| ZSTD_entropyCTablesMetadata_t entropyMetadata; | |
| } ZSTD_blockSplitCtx; | |
| struct ZSTD_CCtx_s { | |
| ZSTD_compressionStage_e stage; | |
| int cParamsChanged; /* == 1 if cParams(except wlog) or compression level are changed in requestedParams. Triggers transmission of new params to ZSTDMT (if available) then reset to 0. */ | |
| int bmi2; /* == 1 if the CPU supports BMI2 and 0 otherwise. CPU support is determined dynamically once per context lifetime. */ | |
| ZSTD_CCtx_params requestedParams; | |
| ZSTD_CCtx_params appliedParams; | |
| ZSTD_CCtx_params simpleApiParams; /* Param storage used by the simple API - not sticky. Must only be used in top-level simple API functions for storage. */ | |
| U32 dictID; | |
| size_t dictContentSize; | |
| ZSTD_cwksp workspace; /* manages buffer for dynamic allocations */ | |
| size_t blockSizeMax; | |
| unsigned long long pledgedSrcSizePlusOne; /* this way, 0 (default) == unknown */ | |
| unsigned long long consumedSrcSize; | |
| unsigned long long producedCSize; | |
| struct xxh64_state xxhState; | |
| ZSTD_customMem customMem; | |
| ZSTD_threadPool* pool; | |
| size_t staticSize; | |
| SeqCollector seqCollector; | |
| int isFirstBlock; | |
| int initialized; | |
| SeqStore_t seqStore; /* sequences storage ptrs */ | |
| ldmState_t ldmState; /* long distance matching state */ | |
| rawSeq* ldmSequences; /* Storage for the ldm output sequences */ | |
| size_t maxNbLdmSequences; | |
| RawSeqStore_t externSeqStore; /* Mutable reference to external sequences */ | |
| ZSTD_blockState_t blockState; | |
| void* tmpWorkspace; /* used as substitute of stack space - must be aligned for S64 type */ | |
| size_t tmpWkspSize; | |
| /* Whether we are streaming or not */ | |
| ZSTD_buffered_policy_e bufferedPolicy; | |
| /* streaming */ | |
| char* inBuff; | |
| size_t inBuffSize; | |
| size_t inToCompress; | |
| size_t inBuffPos; | |
| size_t inBuffTarget; | |
| char* outBuff; | |
| size_t outBuffSize; | |
| size_t outBuffContentSize; | |
| size_t outBuffFlushedSize; | |
| ZSTD_cStreamStage streamStage; | |
| U32 frameEnded; | |
| /* Stable in/out buffer verification */ | |
| ZSTD_inBuffer expectedInBuffer; | |
| size_t stableIn_notConsumed; /* nb bytes within stable input buffer that are said to be consumed but are not */ | |
| size_t expectedOutBufferSize; | |
| /* Dictionary */ | |
| ZSTD_localDict localDict; | |
| const ZSTD_CDict* cdict; | |
| ZSTD_prefixDict prefixDict; /* single-usage dictionary */ | |
| /* Multi-threading */ | |
| /* Tracing */ | |
| /* Workspace for block splitter */ | |
| ZSTD_blockSplitCtx blockSplitCtx; | |
| /* Buffer for output from external sequence producer */ | |
| ZSTD_Sequence* extSeqBuf; | |
| size_t extSeqBufCapacity; | |
| }; | |
| typedef enum { ZSTD_dtlm_fast, ZSTD_dtlm_full } ZSTD_dictTableLoadMethod_e; | |
| typedef enum { ZSTD_tfp_forCCtx, ZSTD_tfp_forCDict } ZSTD_tableFillPurpose_e; | |
| typedef enum { | |
| ZSTD_noDict = 0, | |
| ZSTD_extDict = 1, | |
| ZSTD_dictMatchState = 2, | |
| ZSTD_dedicatedDictSearch = 3 | |
| } ZSTD_dictMode_e; | |
| typedef enum { | |
| ZSTD_cpm_noAttachDict = 0, /* Compression with ZSTD_noDict or ZSTD_extDict. | |
| * In this mode we use both the srcSize and the dictSize | |
| * when selecting and adjusting parameters. | |
| */ | |
| ZSTD_cpm_attachDict = 1, /* Compression with ZSTD_dictMatchState or ZSTD_dedicatedDictSearch. | |
| * In this mode we only take the srcSize into account when selecting | |
| * and adjusting parameters. | |
| */ | |
| ZSTD_cpm_createCDict = 2, /* Creating a CDict. | |
| * In this mode we take both the source size and the dictionary size | |
| * into account when selecting and adjusting the parameters. | |
| */ | |
| ZSTD_cpm_unknown = 3 /* ZSTD_getCParams, ZSTD_getParams, ZSTD_adjustParams. | |
| * We don't know what these parameters are for. We default to the legacy | |
| * behavior of taking both the source size and the dict size into account | |
| * when selecting and adjusting parameters. | |
| */ | |
| } ZSTD_CParamMode_e; | |
| typedef size_t (*ZSTD_BlockCompressor_f) ( | |
| ZSTD_MatchState_t* bs, SeqStore_t* seqStore, U32 rep[ZSTD_REP_NUM], | |
| void const* src, size_t srcSize); | |
| ZSTD_BlockCompressor_f ZSTD_selectBlockCompressor(ZSTD_strategy strat, ZSTD_ParamSwitch_e rowMatchfinderMode, ZSTD_dictMode_e dictMode); | |
| MEM_STATIC U32 ZSTD_LLcode(U32 litLength) | |
| { | |
| static const BYTE LL_Code[64] = { 0, 1, 2, 3, 4, 5, 6, 7, | |
| 8, 9, 10, 11, 12, 13, 14, 15, | |
| 16, 16, 17, 17, 18, 18, 19, 19, | |
| 20, 20, 20, 20, 21, 21, 21, 21, | |
| 22, 22, 22, 22, 22, 22, 22, 22, | |
| 23, 23, 23, 23, 23, 23, 23, 23, | |
| 24, 24, 24, 24, 24, 24, 24, 24, | |
| 24, 24, 24, 24, 24, 24, 24, 24 }; | |
| static const U32 LL_deltaCode = 19; | |
| return (litLength > 63) ? ZSTD_highbit32(litLength) + LL_deltaCode : LL_Code[litLength]; | |
| } | |
| /* ZSTD_MLcode() : | |
| * note : mlBase = matchLength - MINMATCH; | |
| * because it's the format it's stored in seqStore->sequences */ | |
| MEM_STATIC U32 ZSTD_MLcode(U32 mlBase) | |
| { | |
| static const BYTE ML_Code[128] = { 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, | |
| 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, | |
| 32, 32, 33, 33, 34, 34, 35, 35, 36, 36, 36, 36, 37, 37, 37, 37, | |
| 38, 38, 38, 38, 38, 38, 38, 38, 39, 39, 39, 39, 39, 39, 39, 39, | |
| 40, 40, 40, 40, 40, 40, 40, 40, 40, 40, 40, 40, 40, 40, 40, 40, | |
| 41, 41, 41, 41, 41, 41, 41, 41, 41, 41, 41, 41, 41, 41, 41, 41, | |
| 42, 42, 42, 42, 42, 42, 42, 42, 42, 42, 42, 42, 42, 42, 42, 42, | |
| 42, 42, 42, 42, 42, 42, 42, 42, 42, 42, 42, 42, 42, 42, 42, 42 }; | |
| static const U32 ML_deltaCode = 36; | |
| return (mlBase > 127) ? ZSTD_highbit32(mlBase) + ML_deltaCode : ML_Code[mlBase]; | |
| } | |
| /* ZSTD_cParam_withinBounds: | |
| * @return 1 if value is within cParam bounds, | |
| * 0 otherwise */ | |
| MEM_STATIC int ZSTD_cParam_withinBounds(ZSTD_cParameter cParam, int value) | |
| { | |
| ZSTD_bounds const bounds = ZSTD_cParam_getBounds(cParam); | |
| if (ZSTD_isError(bounds.error)) return 0; | |
| if (value < bounds.lowerBound) return 0; | |
| if (value > bounds.upperBound) return 0; | |
| return 1; | |
| } | |
| /* ZSTD_selectAddr: | |
| * @return index >= lowLimit ? candidate : backup, | |
| * tries to force branchless codegen. */ | |
| MEM_STATIC const BYTE* | |
| ZSTD_selectAddr(U32 index, U32 lowLimit, const BYTE* candidate, const BYTE* backup) | |
| { | |
| #if defined(__x86_64__) | |
| __asm__ ( | |
| "cmp %1, %2\n" | |
| "cmova %3, %0\n" | |
| : "+r"(candidate) | |
| : "r"(index), "r"(lowLimit), "r"(backup) | |
| ); | |
| return candidate; | |
| #else | |
| return index >= lowLimit ? candidate : backup; | |
| #endif | |
| } | |
| /* ZSTD_noCompressBlock() : | |
| * Writes uncompressed block to dst buffer from given src. | |
| * Returns the size of the block */ | |
| MEM_STATIC size_t | |
| ZSTD_noCompressBlock(void* dst, size_t dstCapacity, const void* src, size_t srcSize, U32 lastBlock) | |
| { | |
| U32 const cBlockHeader24 = lastBlock + (((U32)bt_raw)<<1) + (U32)(srcSize << 3); | |
| DEBUGLOG(5, "ZSTD_noCompressBlock (srcSize=%zu, dstCapacity=%zu)", srcSize, dstCapacity); | |
| RETURN_ERROR_IF(srcSize + ZSTD_blockHeaderSize > dstCapacity, | |
| dstSize_tooSmall, "dst buf too small for uncompressed block"); | |
| MEM_writeLE24(dst, cBlockHeader24); | |
| ZSTD_memcpy((BYTE*)dst + ZSTD_blockHeaderSize, src, srcSize); | |
| return ZSTD_blockHeaderSize + srcSize; | |
| } | |
| MEM_STATIC size_t | |
| ZSTD_rleCompressBlock(void* dst, size_t dstCapacity, BYTE src, size_t srcSize, U32 lastBlock) | |
| { | |
| BYTE* const op = (BYTE*)dst; | |
| U32 const cBlockHeader = lastBlock + (((U32)bt_rle)<<1) + (U32)(srcSize << 3); | |
| RETURN_ERROR_IF(dstCapacity < 4, dstSize_tooSmall, ""); | |
| MEM_writeLE24(op, cBlockHeader); | |
| op[3] = src; | |
| return 4; | |
| } | |
| /* ZSTD_minGain() : | |
| * minimum compression required | |
| * to generate a compress block or a compressed literals section. | |
| * note : use same formula for both situations */ | |
| MEM_STATIC size_t ZSTD_minGain(size_t srcSize, ZSTD_strategy strat) | |
| { | |
| U32 const minlog = (strat>=ZSTD_btultra) ? (U32)(strat) - 1 : 6; | |
| ZSTD_STATIC_ASSERT(ZSTD_btultra == 8); | |
| assert(ZSTD_cParam_withinBounds(ZSTD_c_strategy, (int)strat)); | |
| return (srcSize >> minlog) + 2; | |
| } | |
| MEM_STATIC int ZSTD_literalsCompressionIsDisabled(const ZSTD_CCtx_params* cctxParams) | |
| { | |
| switch (cctxParams->literalCompressionMode) { | |
| case ZSTD_ps_enable: | |
| return 0; | |
| case ZSTD_ps_disable: | |
| return 1; | |
| default: | |
| assert(0 /* impossible: pre-validated */); | |
| ZSTD_FALLTHROUGH; | |
| case ZSTD_ps_auto: | |
| return (cctxParams->cParams.strategy == ZSTD_fast) && (cctxParams->cParams.targetLength > 0); | |
| } | |
| } | |
| /*! ZSTD_safecopyLiterals() : | |
| * memcpy() function that won't read beyond more than WILDCOPY_OVERLENGTH bytes past ilimit_w. | |
| * Only called when the sequence ends past ilimit_w, so it only needs to be optimized for single | |
| * large copies. | |
| */ | |
| static void | |
| ZSTD_safecopyLiterals(BYTE* op, BYTE const* ip, BYTE const* const iend, BYTE const* ilimit_w) | |
| { | |
| assert(iend > ilimit_w); | |
| if (ip <= ilimit_w) { | |
| ZSTD_wildcopy(op, ip, ilimit_w - ip, ZSTD_no_overlap); | |
| op += ilimit_w - ip; | |
| ip = ilimit_w; | |
| } | |
| while (ip < iend) *op++ = *ip++; | |
| } | |
| #define REPCODE1_TO_OFFBASE REPCODE_TO_OFFBASE(1) | |
| #define REPCODE2_TO_OFFBASE REPCODE_TO_OFFBASE(2) | |
| #define REPCODE3_TO_OFFBASE REPCODE_TO_OFFBASE(3) | |
| #define REPCODE_TO_OFFBASE(r) (assert((r)>=1), assert((r)<=ZSTD_REP_NUM), (r)) /* accepts IDs 1,2,3 */ | |
| #define OFFSET_TO_OFFBASE(o) (assert((o)>0), o + ZSTD_REP_NUM) | |
| #define OFFBASE_IS_OFFSET(o) ((o) > ZSTD_REP_NUM) | |
| #define OFFBASE_IS_REPCODE(o) ( 1 <= (o) && (o) <= ZSTD_REP_NUM) | |
| #define OFFBASE_TO_OFFSET(o) (assert(OFFBASE_IS_OFFSET(o)), (o) - ZSTD_REP_NUM) | |
| #define OFFBASE_TO_REPCODE(o) (assert(OFFBASE_IS_REPCODE(o)), (o)) /* returns ID 1,2,3 */ | |
| /*! ZSTD_storeSeqOnly() : | |
| * Store a sequence (litlen, litPtr, offBase and matchLength) into SeqStore_t. | |
| * Literals themselves are not copied, but @litPtr is updated. | |
| * @offBase : Users should employ macros REPCODE_TO_OFFBASE() and OFFSET_TO_OFFBASE(). | |
| * @matchLength : must be >= MINMATCH | |
| */ | |
| HINT_INLINE UNUSED_ATTR void | |
| ZSTD_storeSeqOnly(SeqStore_t* seqStorePtr, | |
| size_t litLength, | |
| U32 offBase, | |
| size_t matchLength) | |
| { | |
| assert((size_t)(seqStorePtr->sequences - seqStorePtr->sequencesStart) < seqStorePtr->maxNbSeq); | |
| /* literal Length */ | |
| assert(litLength <= ZSTD_BLOCKSIZE_MAX); | |
| if (UNLIKELY(litLength>0xFFFF)) { | |
| assert(seqStorePtr->longLengthType == ZSTD_llt_none); /* there can only be a single long length */ | |
| seqStorePtr->longLengthType = ZSTD_llt_literalLength; | |
| seqStorePtr->longLengthPos = (U32)(seqStorePtr->sequences - seqStorePtr->sequencesStart); | |
| } | |
| seqStorePtr->sequences[0].litLength = (U16)litLength; | |
| /* match offset */ | |
| seqStorePtr->sequences[0].offBase = offBase; | |
| /* match Length */ | |
| assert(matchLength <= ZSTD_BLOCKSIZE_MAX); | |
| assert(matchLength >= MINMATCH); | |
| { size_t const mlBase = matchLength - MINMATCH; | |
| if (UNLIKELY(mlBase>0xFFFF)) { | |
| assert(seqStorePtr->longLengthType == ZSTD_llt_none); /* there can only be a single long length */ | |
| seqStorePtr->longLengthType = ZSTD_llt_matchLength; | |
| seqStorePtr->longLengthPos = (U32)(seqStorePtr->sequences - seqStorePtr->sequencesStart); | |
| } | |
| seqStorePtr->sequences[0].mlBase = (U16)mlBase; | |
| } | |
| seqStorePtr->sequences++; | |
| } | |
| /*! ZSTD_storeSeq() : | |
| * Store a sequence (litlen, litPtr, offBase and matchLength) into SeqStore_t. | |
| * @offBase : Users should employ macros REPCODE_TO_OFFBASE() and OFFSET_TO_OFFBASE(). | |
| * @matchLength : must be >= MINMATCH | |
| * Allowed to over-read literals up to litLimit. | |
| */ | |
| HINT_INLINE UNUSED_ATTR void | |
| ZSTD_storeSeq(SeqStore_t* seqStorePtr, | |
| size_t litLength, const BYTE* literals, const BYTE* litLimit, | |
| U32 offBase, | |
| size_t matchLength) | |
| { | |
| BYTE const* const litLimit_w = litLimit - WILDCOPY_OVERLENGTH; | |
| BYTE const* const litEnd = literals + litLength; | |
| #if defined(DEBUGLEVEL) && (DEBUGLEVEL >= 6) | |
| static const BYTE* g_start = NULL; | |
| if (g_start==NULL) g_start = (const BYTE*)literals; /* note : index only works for compression within a single segment */ | |
| { U32 const pos = (U32)((const BYTE*)literals - g_start); | |
| DEBUGLOG(6, "Cpos%7u :%3u literals, match%4u bytes at offBase%7u", | |
| pos, (U32)litLength, (U32)matchLength, (U32)offBase); | |
| } | |
| #endif | |
| assert((size_t)(seqStorePtr->sequences - seqStorePtr->sequencesStart) < seqStorePtr->maxNbSeq); | |
| /* copy Literals */ | |
| assert(seqStorePtr->maxNbLit <= 128 KB); | |
| assert(seqStorePtr->lit + litLength <= seqStorePtr->litStart + seqStorePtr->maxNbLit); | |
| assert(literals + litLength <= litLimit); | |
| if (litEnd <= litLimit_w) { | |
| /* Common case we can use wildcopy. | |
| * First copy 16 bytes, because literals are likely short. | |
| */ | |
| ZSTD_STATIC_ASSERT(WILDCOPY_OVERLENGTH >= 16); | |
| ZSTD_copy16(seqStorePtr->lit, literals); | |
| if (litLength > 16) { | |
| ZSTD_wildcopy(seqStorePtr->lit+16, literals+16, (ptrdiff_t)litLength-16, ZSTD_no_overlap); | |
| } | |
| } else { | |
| ZSTD_safecopyLiterals(seqStorePtr->lit, literals, litEnd, litLimit_w); | |
| } | |
| seqStorePtr->lit += litLength; | |
| ZSTD_storeSeqOnly(seqStorePtr, litLength, offBase, matchLength); | |
| } | |
| /* ZSTD_updateRep() : | |
| * updates in-place @rep (array of repeat offsets) | |
| * @offBase : sum-type, using numeric representation of ZSTD_storeSeq() | |
| */ | |
| MEM_STATIC void | |
| ZSTD_updateRep(U32 rep[ZSTD_REP_NUM], U32 const offBase, U32 const ll0) | |
| { | |
| if (OFFBASE_IS_OFFSET(offBase)) { /* full offset */ | |
| rep[2] = rep[1]; | |
| rep[1] = rep[0]; | |
| rep[0] = OFFBASE_TO_OFFSET(offBase); | |
| } else { /* repcode */ | |
| U32 const repCode = OFFBASE_TO_REPCODE(offBase) - 1 + ll0; | |
| if (repCode > 0) { /* note : if repCode==0, no change */ | |
| U32 const currentOffset = (repCode==ZSTD_REP_NUM) ? (rep[0] - 1) : rep[repCode]; | |
| rep[2] = (repCode >= 2) ? rep[1] : rep[2]; | |
| rep[1] = rep[0]; | |
| rep[0] = currentOffset; | |
| } else { /* repCode == 0 */ | |
| /* nothing to do */ | |
| } | |
| } | |
| } | |
| typedef struct repcodes_s { | |
| U32 rep[3]; | |
| } Repcodes_t; | |
| MEM_STATIC Repcodes_t | |
| ZSTD_newRep(U32 const rep[ZSTD_REP_NUM], U32 const offBase, U32 const ll0) | |
| { | |
| Repcodes_t newReps; | |
| ZSTD_memcpy(&newReps, rep, sizeof(newReps)); | |
| ZSTD_updateRep(newReps.rep, offBase, ll0); | |
| return newReps; | |
| } | |
| /*-************************************* | |
| * Match length counter | |
| ***************************************/ | |
| MEM_STATIC size_t ZSTD_count(const BYTE* pIn, const BYTE* pMatch, const BYTE* const pInLimit) | |
| { | |
| const BYTE* const pStart = pIn; | |
| const BYTE* const pInLoopLimit = pInLimit - (sizeof(size_t)-1); | |
| if (pIn < pInLoopLimit) { | |
| { size_t const diff = MEM_readST(pMatch) ^ MEM_readST(pIn); | |
| if (diff) return ZSTD_NbCommonBytes(diff); } | |
| pIn+=sizeof(size_t); pMatch+=sizeof(size_t); | |
| while (pIn < pInLoopLimit) { | |
| size_t const diff = MEM_readST(pMatch) ^ MEM_readST(pIn); | |
| if (!diff) { pIn+=sizeof(size_t); pMatch+=sizeof(size_t); continue; } | |
| pIn += ZSTD_NbCommonBytes(diff); | |
| return (size_t)(pIn - pStart); | |
| } } | |
| if (MEM_64bits() && (pIn<(pInLimit-3)) && (MEM_read32(pMatch) == MEM_read32(pIn))) { pIn+=4; pMatch+=4; } | |
| if ((pIn<(pInLimit-1)) && (MEM_read16(pMatch) == MEM_read16(pIn))) { pIn+=2; pMatch+=2; } | |
| if ((pIn<pInLimit) && (*pMatch == *pIn)) pIn++; | |
| return (size_t)(pIn - pStart); | |
| } | |
| /* ZSTD_count_2segments() : | |
| * can count match length with `ip` & `match` in 2 different segments. | |
| * convention : on reaching mEnd, match count continue starting from iStart | |
| */ | |
| MEM_STATIC size_t | |
| ZSTD_count_2segments(const BYTE* ip, const BYTE* match, | |
| const BYTE* iEnd, const BYTE* mEnd, const BYTE* iStart) | |
| { | |
| const BYTE* const vEnd = MIN( ip + (mEnd - match), iEnd); | |
| size_t const matchLength = ZSTD_count(ip, match, vEnd); | |
| if (match + matchLength != mEnd) return matchLength; | |
| DEBUGLOG(7, "ZSTD_count_2segments: found a 2-parts match (current length==%zu)", matchLength); | |
| DEBUGLOG(7, "distance from match beginning to end dictionary = %i", (int)(mEnd - match)); | |
| DEBUGLOG(7, "distance from current pos to end buffer = %i", (int)(iEnd - ip)); | |
| DEBUGLOG(7, "next byte : ip==%02X, istart==%02X", ip[matchLength], *iStart); | |
| DEBUGLOG(7, "final match length = %zu", matchLength + ZSTD_count(ip+matchLength, iStart, iEnd)); | |
| return matchLength + ZSTD_count(ip+matchLength, iStart, iEnd); | |
| } | |
| /*-************************************* | |
| * Hashes | |
| ***************************************/ | |
| static const U32 prime3bytes = 506832829U; | |
| static U32 ZSTD_hash3(U32 u, U32 h, U32 s) { assert(h <= 32); return (((u << (32-24)) * prime3bytes) ^ s) >> (32-h) ; } | |
| MEM_STATIC size_t ZSTD_hash3Ptr(const void* ptr, U32 h) { return ZSTD_hash3(MEM_readLE32(ptr), h, 0); } /* only in zstd_opt.h */ | |
| MEM_STATIC size_t ZSTD_hash3PtrS(const void* ptr, U32 h, U32 s) { return ZSTD_hash3(MEM_readLE32(ptr), h, s); } | |
| static const U32 prime4bytes = 2654435761U; | |
| static U32 ZSTD_hash4(U32 u, U32 h, U32 s) { assert(h <= 32); return ((u * prime4bytes) ^ s) >> (32-h) ; } | |
| static size_t ZSTD_hash4Ptr(const void* ptr, U32 h) { return ZSTD_hash4(MEM_readLE32(ptr), h, 0); } | |
| static size_t ZSTD_hash4PtrS(const void* ptr, U32 h, U32 s) { return ZSTD_hash4(MEM_readLE32(ptr), h, s); } | |
| static const U64 prime5bytes = 889523592379ULL; | |
| static size_t ZSTD_hash5(U64 u, U32 h, U64 s) { assert(h <= 64); return (size_t)((((u << (64-40)) * prime5bytes) ^ s) >> (64-h)) ; } | |
| static size_t ZSTD_hash5Ptr(const void* p, U32 h) { return ZSTD_hash5(MEM_readLE64(p), h, 0); } | |
| static size_t ZSTD_hash5PtrS(const void* p, U32 h, U64 s) { return ZSTD_hash5(MEM_readLE64(p), h, s); } | |
| static const U64 prime6bytes = 227718039650203ULL; | |
| static size_t ZSTD_hash6(U64 u, U32 h, U64 s) { assert(h <= 64); return (size_t)((((u << (64-48)) * prime6bytes) ^ s) >> (64-h)) ; } | |
| static size_t ZSTD_hash6Ptr(const void* p, U32 h) { return ZSTD_hash6(MEM_readLE64(p), h, 0); } | |
| static size_t ZSTD_hash6PtrS(const void* p, U32 h, U64 s) { return ZSTD_hash6(MEM_readLE64(p), h, s); } | |
| static const U64 prime7bytes = 58295818150454627ULL; | |
| static size_t ZSTD_hash7(U64 u, U32 h, U64 s) { assert(h <= 64); return (size_t)((((u << (64-56)) * prime7bytes) ^ s) >> (64-h)) ; } | |
| static size_t ZSTD_hash7Ptr(const void* p, U32 h) { return ZSTD_hash7(MEM_readLE64(p), h, 0); } | |
| static size_t ZSTD_hash7PtrS(const void* p, U32 h, U64 s) { return ZSTD_hash7(MEM_readLE64(p), h, s); } | |
| static const U64 prime8bytes = 0xCF1BBCDCB7A56463ULL; | |
| static size_t ZSTD_hash8(U64 u, U32 h, U64 s) { assert(h <= 64); return (size_t)((((u) * prime8bytes) ^ s) >> (64-h)) ; } | |
| static size_t ZSTD_hash8Ptr(const void* p, U32 h) { return ZSTD_hash8(MEM_readLE64(p), h, 0); } | |
| static size_t ZSTD_hash8PtrS(const void* p, U32 h, U64 s) { return ZSTD_hash8(MEM_readLE64(p), h, s); } | |
| MEM_STATIC FORCE_INLINE_ATTR | |
| size_t ZSTD_hashPtr(const void* p, U32 hBits, U32 mls) | |
| { | |
| /* Although some of these hashes do support hBits up to 64, some do not. | |
| * To be on the safe side, always avoid hBits > 32. */ | |
| assert(hBits <= 32); | |
| switch(mls) | |
| { | |
| default: | |
| case 4: return ZSTD_hash4Ptr(p, hBits); | |
| case 5: return ZSTD_hash5Ptr(p, hBits); | |
| case 6: return ZSTD_hash6Ptr(p, hBits); | |
| case 7: return ZSTD_hash7Ptr(p, hBits); | |
| case 8: return ZSTD_hash8Ptr(p, hBits); | |
| } | |
| } | |
| MEM_STATIC FORCE_INLINE_ATTR | |
| size_t ZSTD_hashPtrSalted(const void* p, U32 hBits, U32 mls, const U64 hashSalt) { | |
| /* Although some of these hashes do support hBits up to 64, some do not. | |
| * To be on the safe side, always avoid hBits > 32. */ | |
| assert(hBits <= 32); | |
| switch(mls) | |
| { | |
| default: | |
| case 4: return ZSTD_hash4PtrS(p, hBits, (U32)hashSalt); | |
| case 5: return ZSTD_hash5PtrS(p, hBits, hashSalt); | |
| case 6: return ZSTD_hash6PtrS(p, hBits, hashSalt); | |
| case 7: return ZSTD_hash7PtrS(p, hBits, hashSalt); | |
| case 8: return ZSTD_hash8PtrS(p, hBits, hashSalt); | |
| } | |
| } | |
| /* ZSTD_ipow() : | |
| * Return base^exponent. | |
| */ | |
| static U64 ZSTD_ipow(U64 base, U64 exponent) | |
| { | |
| U64 power = 1; | |
| while (exponent) { | |
| if (exponent & 1) power *= base; | |
| exponent >>= 1; | |
| base *= base; | |
| } | |
| return power; | |
| } | |
| #define ZSTD_ROLL_HASH_CHAR_OFFSET 10 | |
| /* ZSTD_rollingHash_append() : | |
| * Add the buffer to the hash value. | |
| */ | |
| static U64 ZSTD_rollingHash_append(U64 hash, void const* buf, size_t size) | |
| { | |
| BYTE const* istart = (BYTE const*)buf; | |
| size_t pos; | |
| for (pos = 0; pos < size; ++pos) { | |
| hash *= prime8bytes; | |
| hash += istart[pos] + ZSTD_ROLL_HASH_CHAR_OFFSET; | |
| } | |
| return hash; | |
| } | |
| /* ZSTD_rollingHash_compute() : | |
| * Compute the rolling hash value of the buffer. | |
| */ | |
| MEM_STATIC U64 ZSTD_rollingHash_compute(void const* buf, size_t size) | |
| { | |
| return ZSTD_rollingHash_append(0, buf, size); | |
| } | |
| /* ZSTD_rollingHash_primePower() : | |
| * Compute the primePower to be passed to ZSTD_rollingHash_rotate() for a hash | |
| * over a window of length bytes. | |
| */ | |
| MEM_STATIC U64 ZSTD_rollingHash_primePower(U32 length) | |
| { | |
| return ZSTD_ipow(prime8bytes, length - 1); | |
| } | |
| /* ZSTD_rollingHash_rotate() : | |
| * Rotate the rolling hash by one byte. | |
| */ | |
| MEM_STATIC U64 ZSTD_rollingHash_rotate(U64 hash, BYTE toRemove, BYTE toAdd, U64 primePower) | |
| { | |
| hash -= (toRemove + ZSTD_ROLL_HASH_CHAR_OFFSET) * primePower; | |
| hash *= prime8bytes; | |
| hash += toAdd + ZSTD_ROLL_HASH_CHAR_OFFSET; | |
| return hash; | |
| } | |
| /*-************************************* | |
| * Round buffer management | |
| ***************************************/ | |
| /* Max @current value allowed: | |
| * In 32-bit mode: we want to avoid crossing the 2 GB limit, | |
| * reducing risks of side effects in case of signed operations on indexes. | |
| * In 64-bit mode: we want to ensure that adding the maximum job size (512 MB) | |
| * doesn't overflow U32 index capacity (4 GB) */ | |
| #define ZSTD_CURRENT_MAX (MEM_64bits() ? 3500U MB : 2000U MB) | |
| /* Maximum chunk size before overflow correction needs to be called again */ | |
| #define ZSTD_CHUNKSIZE_MAX \ | |
| ( ((U32)-1) /* Maximum ending current index */ \ | |
| - ZSTD_CURRENT_MAX) /* Maximum beginning lowLimit */ | |
| /* | |
| * ZSTD_window_clear(): | |
| * Clears the window containing the history by simply setting it to empty. | |
| */ | |
| MEM_STATIC void ZSTD_window_clear(ZSTD_window_t* window) | |
| { | |
| size_t const endT = (size_t)(window->nextSrc - window->base); | |
| U32 const end = (U32)endT; | |
| window->lowLimit = end; | |
| window->dictLimit = end; | |
| } | |
| MEM_STATIC U32 ZSTD_window_isEmpty(ZSTD_window_t const window) | |
| { | |
| return window.dictLimit == ZSTD_WINDOW_START_INDEX && | |
| window.lowLimit == ZSTD_WINDOW_START_INDEX && | |
| (window.nextSrc - window.base) == ZSTD_WINDOW_START_INDEX; | |
| } | |
| /* | |
| * ZSTD_window_hasExtDict(): | |
| * Returns non-zero if the window has a non-empty extDict. | |
| */ | |
| MEM_STATIC U32 ZSTD_window_hasExtDict(ZSTD_window_t const window) | |
| { | |
| return window.lowLimit < window.dictLimit; | |
| } | |
| /* | |
| * ZSTD_matchState_dictMode(): | |
| * Inspects the provided matchState and figures out what dictMode should be | |
| * passed to the compressor. | |
| */ | |
| MEM_STATIC ZSTD_dictMode_e ZSTD_matchState_dictMode(const ZSTD_MatchState_t *ms) | |
| { | |
| return ZSTD_window_hasExtDict(ms->window) ? | |
| ZSTD_extDict : | |
| ms->dictMatchState != NULL ? | |
| (ms->dictMatchState->dedicatedDictSearch ? ZSTD_dedicatedDictSearch : ZSTD_dictMatchState) : | |
| ZSTD_noDict; | |
| } | |
| /* Defining this macro to non-zero tells zstd to run the overflow correction | |
| * code much more frequently. This is very inefficient, and should only be | |
| * used for tests and fuzzers. | |
| */ | |
| #ifndef ZSTD_WINDOW_OVERFLOW_CORRECT_FREQUENTLY | |
| # ifdef FUZZING_BUILD_MODE_UNSAFE_FOR_PRODUCTION | |
| # define ZSTD_WINDOW_OVERFLOW_CORRECT_FREQUENTLY 1 | |
| # else | |
| # define ZSTD_WINDOW_OVERFLOW_CORRECT_FREQUENTLY 0 | |
| # endif | |
| #endif | |
| /* | |
| * ZSTD_window_canOverflowCorrect(): | |
| * Returns non-zero if the indices are large enough for overflow correction | |
| * to work correctly without impacting compression ratio. | |
| */ | |
| MEM_STATIC U32 ZSTD_window_canOverflowCorrect(ZSTD_window_t const window, | |
| U32 cycleLog, | |
| U32 maxDist, | |
| U32 loadedDictEnd, | |
| void const* src) | |
| { | |
| U32 const cycleSize = 1u << cycleLog; | |
| U32 const curr = (U32)((BYTE const*)src - window.base); | |
| U32 const minIndexToOverflowCorrect = cycleSize | |
| + MAX(maxDist, cycleSize) | |
| + ZSTD_WINDOW_START_INDEX; | |
| /* Adjust the min index to backoff the overflow correction frequency, | |
| * so we don't waste too much CPU in overflow correction. If this | |
| * computation overflows we don't really care, we just need to make | |
| * sure it is at least minIndexToOverflowCorrect. | |
| */ | |
| U32 const adjustment = window.nbOverflowCorrections + 1; | |
| U32 const adjustedIndex = MAX(minIndexToOverflowCorrect * adjustment, | |
| minIndexToOverflowCorrect); | |
| U32 const indexLargeEnough = curr > adjustedIndex; | |
| /* Only overflow correct early if the dictionary is invalidated already, | |
| * so we don't hurt compression ratio. | |
| */ | |
| U32 const dictionaryInvalidated = curr > maxDist + loadedDictEnd; | |
| return indexLargeEnough && dictionaryInvalidated; | |
| } | |
| /* | |
| * ZSTD_window_needOverflowCorrection(): | |
| * Returns non-zero if the indices are getting too large and need overflow | |
| * protection. | |
| */ | |
| MEM_STATIC U32 ZSTD_window_needOverflowCorrection(ZSTD_window_t const window, | |
| U32 cycleLog, | |
| U32 maxDist, | |
| U32 loadedDictEnd, | |
| void const* src, | |
| void const* srcEnd) | |
| { | |
| U32 const curr = (U32)((BYTE const*)srcEnd - window.base); | |
| if (ZSTD_WINDOW_OVERFLOW_CORRECT_FREQUENTLY) { | |
| if (ZSTD_window_canOverflowCorrect(window, cycleLog, maxDist, loadedDictEnd, src)) { | |
| return 1; | |
| } | |
| } | |
| return curr > ZSTD_CURRENT_MAX; | |
| } | |
| /* | |
| * ZSTD_window_correctOverflow(): | |
| * Reduces the indices to protect from index overflow. | |
| * Returns the correction made to the indices, which must be applied to every | |
| * stored index. | |
| * | |
| * The least significant cycleLog bits of the indices must remain the same, | |
| * which may be 0. Every index up to maxDist in the past must be valid. | |
| */ | |
| MEM_STATIC | |
| ZSTD_ALLOW_POINTER_OVERFLOW_ATTR | |
| U32 ZSTD_window_correctOverflow(ZSTD_window_t* window, U32 cycleLog, | |
| U32 maxDist, void const* src) | |
| { | |
| /* preemptive overflow correction: | |
| * 1. correction is large enough: | |
| * lowLimit > (3<<29) ==> current > 3<<29 + 1<<windowLog | |
| * 1<<windowLog <= newCurrent < 1<<chainLog + 1<<windowLog | |
| * | |
| * current - newCurrent | |
| * > (3<<29 + 1<<windowLog) - (1<<windowLog + 1<<chainLog) | |
| * > (3<<29) - (1<<chainLog) | |
| * > (3<<29) - (1<<30) (NOTE: chainLog <= 30) | |
| * > 1<<29 | |
| * | |
| * 2. (ip+ZSTD_CHUNKSIZE_MAX - cctx->base) doesn't overflow: | |
| * After correction, current is less than (1<<chainLog + 1<<windowLog). | |
| * In 64-bit mode we are safe, because we have 64-bit ptrdiff_t. | |
| * In 32-bit mode we are safe, because (chainLog <= 29), so | |
| * ip+ZSTD_CHUNKSIZE_MAX - cctx->base < 1<<32. | |
| * 3. (cctx->lowLimit + 1<<windowLog) < 1<<32: | |
| * windowLog <= 31 ==> 3<<29 + 1<<windowLog < 7<<29 < 1<<32. | |
| */ | |
| U32 const cycleSize = 1u << cycleLog; | |
| U32 const cycleMask = cycleSize - 1; | |
| U32 const curr = (U32)((BYTE const*)src - window->base); | |
| U32 const currentCycle = curr & cycleMask; | |
| /* Ensure newCurrent - maxDist >= ZSTD_WINDOW_START_INDEX. */ | |
| U32 const currentCycleCorrection = currentCycle < ZSTD_WINDOW_START_INDEX | |
| ? MAX(cycleSize, ZSTD_WINDOW_START_INDEX) | |
| : 0; | |
| U32 const newCurrent = currentCycle | |
| + currentCycleCorrection | |
| + MAX(maxDist, cycleSize); | |
| U32 const correction = curr - newCurrent; | |
| /* maxDist must be a power of two so that: | |
| * (newCurrent & cycleMask) == (curr & cycleMask) | |
| * This is required to not corrupt the chains / binary tree. | |
| */ | |
| assert((maxDist & (maxDist - 1)) == 0); | |
| assert((curr & cycleMask) == (newCurrent & cycleMask)); | |
| assert(curr > newCurrent); | |
| if (!ZSTD_WINDOW_OVERFLOW_CORRECT_FREQUENTLY) { | |
| /* Loose bound, should be around 1<<29 (see above) */ | |
| assert(correction > 1<<28); | |
| } | |
| window->base += correction; | |
| window->dictBase += correction; | |
| if (window->lowLimit < correction + ZSTD_WINDOW_START_INDEX) { | |
| window->lowLimit = ZSTD_WINDOW_START_INDEX; | |
| } else { | |
| window->lowLimit -= correction; | |
| } | |
| if (window->dictLimit < correction + ZSTD_WINDOW_START_INDEX) { | |
| window->dictLimit = ZSTD_WINDOW_START_INDEX; | |
| } else { | |
| window->dictLimit -= correction; | |
| } | |
| /* Ensure we can still reference the full window. */ | |
| assert(newCurrent >= maxDist); | |
| assert(newCurrent - maxDist >= ZSTD_WINDOW_START_INDEX); | |
| /* Ensure that lowLimit and dictLimit didn't underflow. */ | |
| assert(window->lowLimit <= newCurrent); | |
| assert(window->dictLimit <= newCurrent); | |
| ++window->nbOverflowCorrections; | |
| DEBUGLOG(4, "Correction of 0x%x bytes to lowLimit=0x%x", correction, | |
| window->lowLimit); | |
| return correction; | |
| } | |
| /* | |
| * ZSTD_window_enforceMaxDist(): | |
| * Updates lowLimit so that: | |
| * (srcEnd - base) - lowLimit == maxDist + loadedDictEnd | |
| * | |
| * It ensures index is valid as long as index >= lowLimit. | |
| * This must be called before a block compression call. | |
| * | |
| * loadedDictEnd is only defined if a dictionary is in use for current compression. | |
| * As the name implies, loadedDictEnd represents the index at end of dictionary. | |
| * The value lies within context's referential, it can be directly compared to blockEndIdx. | |
| * | |
| * If loadedDictEndPtr is NULL, no dictionary is in use, and we use loadedDictEnd == 0. | |
| * If loadedDictEndPtr is not NULL, we set it to zero after updating lowLimit. | |
| * This is because dictionaries are allowed to be referenced fully | |
| * as long as the last byte of the dictionary is in the window. | |
| * Once input has progressed beyond window size, dictionary cannot be referenced anymore. | |
| * | |
| * In normal dict mode, the dictionary lies between lowLimit and dictLimit. | |
| * In dictMatchState mode, lowLimit and dictLimit are the same, | |
| * and the dictionary is below them. | |
| * forceWindow and dictMatchState are therefore incompatible. | |
| */ | |
| MEM_STATIC void | |
| ZSTD_window_enforceMaxDist(ZSTD_window_t* window, | |
| const void* blockEnd, | |
| U32 maxDist, | |
| U32* loadedDictEndPtr, | |
| const ZSTD_MatchState_t** dictMatchStatePtr) | |
| { | |
| U32 const blockEndIdx = (U32)((BYTE const*)blockEnd - window->base); | |
| U32 const loadedDictEnd = (loadedDictEndPtr != NULL) ? *loadedDictEndPtr : 0; | |
| DEBUGLOG(5, "ZSTD_window_enforceMaxDist: blockEndIdx=%u, maxDist=%u, loadedDictEnd=%u", | |
| (unsigned)blockEndIdx, (unsigned)maxDist, (unsigned)loadedDictEnd); | |
| /* - When there is no dictionary : loadedDictEnd == 0. | |
| In which case, the test (blockEndIdx > maxDist) is merely to avoid | |
| overflowing next operation `newLowLimit = blockEndIdx - maxDist`. | |
| - When there is a standard dictionary : | |
| Index referential is copied from the dictionary, | |
| which means it starts from 0. | |
| In which case, loadedDictEnd == dictSize, | |
| and it makes sense to compare `blockEndIdx > maxDist + dictSize` | |
| since `blockEndIdx` also starts from zero. | |
| - When there is an attached dictionary : | |
| loadedDictEnd is expressed within the referential of the context, | |
| so it can be directly compared against blockEndIdx. | |
| */ | |
| if (blockEndIdx > maxDist + loadedDictEnd) { | |
| U32 const newLowLimit = blockEndIdx - maxDist; | |
| if (window->lowLimit < newLowLimit) window->lowLimit = newLowLimit; | |
| if (window->dictLimit < window->lowLimit) { | |
| DEBUGLOG(5, "Update dictLimit to match lowLimit, from %u to %u", | |
| (unsigned)window->dictLimit, (unsigned)window->lowLimit); | |
| window->dictLimit = window->lowLimit; | |
| } | |
| /* On reaching window size, dictionaries are invalidated */ | |
| if (loadedDictEndPtr) *loadedDictEndPtr = 0; | |
| if (dictMatchStatePtr) *dictMatchStatePtr = NULL; | |
| } | |
| } | |
| /* Similar to ZSTD_window_enforceMaxDist(), | |
| * but only invalidates dictionary | |
| * when input progresses beyond window size. | |
| * assumption : loadedDictEndPtr and dictMatchStatePtr are valid (non NULL) | |
| * loadedDictEnd uses same referential as window->base | |
| * maxDist is the window size */ | |
| MEM_STATIC void | |
| ZSTD_checkDictValidity(const ZSTD_window_t* window, | |
| const void* blockEnd, | |
| U32 maxDist, | |
| U32* loadedDictEndPtr, | |
| const ZSTD_MatchState_t** dictMatchStatePtr) | |
| { | |
| assert(loadedDictEndPtr != NULL); | |
| assert(dictMatchStatePtr != NULL); | |
| { U32 const blockEndIdx = (U32)((BYTE const*)blockEnd - window->base); | |
| U32 const loadedDictEnd = *loadedDictEndPtr; | |
| DEBUGLOG(5, "ZSTD_checkDictValidity: blockEndIdx=%u, maxDist=%u, loadedDictEnd=%u", | |
| (unsigned)blockEndIdx, (unsigned)maxDist, (unsigned)loadedDictEnd); | |
| assert(blockEndIdx >= loadedDictEnd); | |
| if (blockEndIdx > loadedDictEnd + maxDist || loadedDictEnd != window->dictLimit) { | |
| /* On reaching window size, dictionaries are invalidated. | |
| * For simplification, if window size is reached anywhere within next block, | |
| * the dictionary is invalidated for the full block. | |
| * | |
| * We also have to invalidate the dictionary if ZSTD_window_update() has detected | |
| * non-contiguous segments, which means that loadedDictEnd != window->dictLimit. | |
| * loadedDictEnd may be 0, if forceWindow is true, but in that case we never use | |
| * dictMatchState, so setting it to NULL is not a problem. | |
| */ | |
| DEBUGLOG(6, "invalidating dictionary for current block (distance > windowSize)"); | |
| *loadedDictEndPtr = 0; | |
| *dictMatchStatePtr = NULL; | |
| } else { | |
| if (*loadedDictEndPtr != 0) { | |
| DEBUGLOG(6, "dictionary considered valid for current block"); | |
| } } } | |
| } | |
| MEM_STATIC void ZSTD_window_init(ZSTD_window_t* window) { | |
| ZSTD_memset(window, 0, sizeof(*window)); | |
| window->base = (BYTE const*)" "; | |
| window->dictBase = (BYTE const*)" "; | |
| ZSTD_STATIC_ASSERT(ZSTD_DUBT_UNSORTED_MARK < ZSTD_WINDOW_START_INDEX); /* Start above ZSTD_DUBT_UNSORTED_MARK */ | |
| window->dictLimit = ZSTD_WINDOW_START_INDEX; /* start from >0, so that 1st position is valid */ | |
| window->lowLimit = ZSTD_WINDOW_START_INDEX; /* it ensures first and later CCtx usages compress the same */ | |
| window->nextSrc = window->base + ZSTD_WINDOW_START_INDEX; /* see issue #1241 */ | |
| window->nbOverflowCorrections = 0; | |
| } | |
| /* | |
| * ZSTD_window_update(): | |
| * Updates the window by appending [src, src + srcSize) to the window. | |
| * If it is not contiguous, the current prefix becomes the extDict, and we | |
| * forget about the extDict. Handles overlap of the prefix and extDict. | |
| * Returns non-zero if the segment is contiguous. | |
| */ | |
| MEM_STATIC | |
| ZSTD_ALLOW_POINTER_OVERFLOW_ATTR | |
| U32 ZSTD_window_update(ZSTD_window_t* window, | |
| const void* src, size_t srcSize, | |
| int forceNonContiguous) | |
| { | |
| BYTE const* const ip = (BYTE const*)src; | |
| U32 contiguous = 1; | |
| DEBUGLOG(5, "ZSTD_window_update"); | |
| if (srcSize == 0) | |
| return contiguous; | |
| assert(window->base != NULL); | |
| assert(window->dictBase != NULL); | |
| /* Check if blocks follow each other */ | |
| if (src != window->nextSrc || forceNonContiguous) { | |
| /* not contiguous */ | |
| size_t const distanceFromBase = (size_t)(window->nextSrc - window->base); | |
| DEBUGLOG(5, "Non contiguous blocks, new segment starts at %u", window->dictLimit); | |
| window->lowLimit = window->dictLimit; | |
| assert(distanceFromBase == (size_t)(U32)distanceFromBase); /* should never overflow */ | |
| window->dictLimit = (U32)distanceFromBase; | |
| window->dictBase = window->base; | |
| window->base = ip - distanceFromBase; | |
| /* ms->nextToUpdate = window->dictLimit; */ | |
| if (window->dictLimit - window->lowLimit < HASH_READ_SIZE) window->lowLimit = window->dictLimit; /* too small extDict */ | |
| contiguous = 0; | |
| } | |
| window->nextSrc = ip + srcSize; | |
| /* if input and dictionary overlap : reduce dictionary (area presumed modified by input) */ | |
| if ( (ip+srcSize > window->dictBase + window->lowLimit) | |
| & (ip < window->dictBase + window->dictLimit)) { | |
| size_t const highInputIdx = (size_t)((ip + srcSize) - window->dictBase); | |
| U32 const lowLimitMax = (highInputIdx > (size_t)window->dictLimit) ? window->dictLimit : (U32)highInputIdx; | |
| assert(highInputIdx < UINT_MAX); | |
| window->lowLimit = lowLimitMax; | |
| DEBUGLOG(5, "Overlapping extDict and input : new lowLimit = %u", window->lowLimit); | |
| } | |
| return contiguous; | |
| } | |
| /* | |
| * Returns the lowest allowed match index. It may either be in the ext-dict or the prefix. | |
| */ | |
| MEM_STATIC U32 ZSTD_getLowestMatchIndex(const ZSTD_MatchState_t* ms, U32 curr, unsigned windowLog) | |
| { | |
| U32 const maxDistance = 1U << windowLog; | |
| U32 const lowestValid = ms->window.lowLimit; | |
| U32 const withinWindow = (curr - lowestValid > maxDistance) ? curr - maxDistance : lowestValid; | |
| U32 const isDictionary = (ms->loadedDictEnd != 0); | |
| /* When using a dictionary the entire dictionary is valid if a single byte of the dictionary | |
| * is within the window. We invalidate the dictionary (and set loadedDictEnd to 0) when it isn't | |
| * valid for the entire block. So this check is sufficient to find the lowest valid match index. | |
| */ | |
| U32 const matchLowest = isDictionary ? lowestValid : withinWindow; | |
| return matchLowest; | |
| } | |
| /* | |
| * Returns the lowest allowed match index in the prefix. | |
| */ | |
| MEM_STATIC U32 ZSTD_getLowestPrefixIndex(const ZSTD_MatchState_t* ms, U32 curr, unsigned windowLog) | |
| { | |
| U32 const maxDistance = 1U << windowLog; | |
| U32 const lowestValid = ms->window.dictLimit; | |
| U32 const withinWindow = (curr - lowestValid > maxDistance) ? curr - maxDistance : lowestValid; | |
| U32 const isDictionary = (ms->loadedDictEnd != 0); | |
| /* When computing the lowest prefix index we need to take the dictionary into account to handle | |
| * the edge case where the dictionary and the source are contiguous in memory. | |
| */ | |
| U32 const matchLowest = isDictionary ? lowestValid : withinWindow; | |
| return matchLowest; | |
| } | |
| /* index_safety_check: | |
| * intentional underflow : ensure repIndex isn't overlapping dict + prefix | |
| * @return 1 if values are not overlapping, | |
| * 0 otherwise */ | |
| MEM_STATIC int ZSTD_index_overlap_check(const U32 prefixLowestIndex, const U32 repIndex) { | |
| return ((U32)((prefixLowestIndex-1) - repIndex) >= 3); | |
| } | |
| /* debug functions */ | |
| #if (DEBUGLEVEL>=2) | |
| MEM_STATIC double ZSTD_fWeight(U32 rawStat) | |
| { | |
| U32 const fp_accuracy = 8; | |
| U32 const fp_multiplier = (1 << fp_accuracy); | |
| U32 const newStat = rawStat + 1; | |
| U32 const hb = ZSTD_highbit32(newStat); | |
| U32 const BWeight = hb * fp_multiplier; | |
| U32 const FWeight = (newStat << fp_accuracy) >> hb; | |
| U32 const weight = BWeight + FWeight; | |
| assert(hb + fp_accuracy < 31); | |
| return (double)weight / fp_multiplier; | |
| } | |
| /* display a table content, | |
| * listing each element, its frequency, and its predicted bit cost */ | |
| MEM_STATIC void ZSTD_debugTable(const U32* table, U32 max) | |
| { | |
| unsigned u, sum; | |
| for (u=0, sum=0; u<=max; u++) sum += table[u]; | |
| DEBUGLOG(2, "total nb elts: %u", sum); | |
| for (u=0; u<=max; u++) { | |
| DEBUGLOG(2, "%2u: %5u (%.2f)", | |
| u, table[u], ZSTD_fWeight(sum) - ZSTD_fWeight(table[u]) ); | |
| } | |
| } | |
| #endif | |
| /* Short Cache */ | |
| /* Normally, zstd matchfinders follow this flow: | |
| * 1. Compute hash at ip | |
| * 2. Load index from hashTable[hash] | |
| * 3. Check if *ip == *(base + index) | |
| * In dictionary compression, loading *(base + index) is often an L2 or even L3 miss. | |
| * | |
| * Short cache is an optimization which allows us to avoid step 3 most of the time | |
| * when the data doesn't actually match. With short cache, the flow becomes: | |
| * 1. Compute (hash, currentTag) at ip. currentTag is an 8-bit independent hash at ip. | |
| * 2. Load (index, matchTag) from hashTable[hash]. See ZSTD_writeTaggedIndex to understand how this works. | |
| * 3. Only if currentTag == matchTag, check *ip == *(base + index). Otherwise, continue. | |
| * | |
| * Currently, short cache is only implemented in CDict hashtables. Thus, its use is limited to | |
| * dictMatchState matchfinders. | |
| */ | |
| #define ZSTD_SHORT_CACHE_TAG_BITS 8 | |
| #define ZSTD_SHORT_CACHE_TAG_MASK ((1u << ZSTD_SHORT_CACHE_TAG_BITS) - 1) | |
| /* Helper function for ZSTD_fillHashTable and ZSTD_fillDoubleHashTable. | |
| * Unpacks hashAndTag into (hash, tag), then packs (index, tag) into hashTable[hash]. */ | |
| MEM_STATIC void ZSTD_writeTaggedIndex(U32* const hashTable, size_t hashAndTag, U32 index) { | |
| size_t const hash = hashAndTag >> ZSTD_SHORT_CACHE_TAG_BITS; | |
| U32 const tag = (U32)(hashAndTag & ZSTD_SHORT_CACHE_TAG_MASK); | |
| assert(index >> (32 - ZSTD_SHORT_CACHE_TAG_BITS) == 0); | |
| hashTable[hash] = (index << ZSTD_SHORT_CACHE_TAG_BITS) | tag; | |
| } | |
| /* Helper function for short cache matchfinders. | |
| * Unpacks tag1 and tag2 from lower bits of packedTag1 and packedTag2, then checks if the tags match. */ | |
| MEM_STATIC int ZSTD_comparePackedTags(size_t packedTag1, size_t packedTag2) { | |
| U32 const tag1 = packedTag1 & ZSTD_SHORT_CACHE_TAG_MASK; | |
| U32 const tag2 = packedTag2 & ZSTD_SHORT_CACHE_TAG_MASK; | |
| return tag1 == tag2; | |
| } | |
| /* =============================================================== | |
| * Shared internal declarations | |
| * These prototypes may be called from sources not in lib/compress | |
| * =============================================================== */ | |
| /* ZSTD_loadCEntropy() : | |
| * dict : must point at beginning of a valid zstd dictionary. | |
| * return : size of dictionary header (size of magic number + dict ID + entropy tables) | |
| * assumptions : magic number supposed already checked | |
| * and dictSize >= 8 */ | |
| size_t ZSTD_loadCEntropy(ZSTD_compressedBlockState_t* bs, void* workspace, | |
| const void* const dict, size_t dictSize); | |
| void ZSTD_reset_compressedBlockState(ZSTD_compressedBlockState_t* bs); | |
| typedef struct { | |
| U32 idx; /* Index in array of ZSTD_Sequence */ | |
| U32 posInSequence; /* Position within sequence at idx */ | |
| size_t posInSrc; /* Number of bytes given by sequences provided so far */ | |
| } ZSTD_SequencePosition; | |
| /* for benchmark */ | |
| size_t ZSTD_convertBlockSequences(ZSTD_CCtx* cctx, | |
| const ZSTD_Sequence* const inSeqs, size_t nbSequences, | |
| int const repcodeResolution); | |
| typedef struct { | |
| size_t nbSequences; | |
| size_t blockSize; | |
| size_t litSize; | |
| } BlockSummary; | |
| BlockSummary ZSTD_get1BlockSummary(const ZSTD_Sequence* seqs, size_t nbSeqs); | |
| /* ============================================================== | |
| * Private declarations | |
| * These prototypes shall only be called from within lib/compress | |
| * ============================================================== */ | |
| /* ZSTD_getCParamsFromCCtxParams() : | |
| * cParams are built depending on compressionLevel, src size hints, | |
| * LDM and manually set compression parameters. | |
| * Note: srcSizeHint == 0 means 0! | |
| */ | |
| ZSTD_compressionParameters ZSTD_getCParamsFromCCtxParams( | |
| const ZSTD_CCtx_params* CCtxParams, U64 srcSizeHint, size_t dictSize, ZSTD_CParamMode_e mode); | |
| /*! ZSTD_initCStream_internal() : | |
| * Private use only. Init streaming operation. | |
| * expects params to be valid. | |
| * must receive dict, or cdict, or none, but not both. | |
| * @return : 0, or an error code */ | |
| size_t ZSTD_initCStream_internal(ZSTD_CStream* zcs, | |
| const void* dict, size_t dictSize, | |
| const ZSTD_CDict* cdict, | |
| const ZSTD_CCtx_params* params, unsigned long long pledgedSrcSize); | |
| void ZSTD_resetSeqStore(SeqStore_t* ssPtr); | |
| /*! ZSTD_getCParamsFromCDict() : | |
| * as the name implies */ | |
| ZSTD_compressionParameters ZSTD_getCParamsFromCDict(const ZSTD_CDict* cdict); | |
| /* ZSTD_compressBegin_advanced_internal() : | |
| * Private use only. To be called from zstdmt_compress.c. */ | |
| size_t ZSTD_compressBegin_advanced_internal(ZSTD_CCtx* cctx, | |
| const void* dict, size_t dictSize, | |
| ZSTD_dictContentType_e dictContentType, | |
| ZSTD_dictTableLoadMethod_e dtlm, | |
| const ZSTD_CDict* cdict, | |
| const ZSTD_CCtx_params* params, | |
| unsigned long long pledgedSrcSize); | |
| /* ZSTD_compress_advanced_internal() : | |
| * Private use only. To be called from zstdmt_compress.c. */ | |
| size_t ZSTD_compress_advanced_internal(ZSTD_CCtx* cctx, | |
| void* dst, size_t dstCapacity, | |
| const void* src, size_t srcSize, | |
| const void* dict,size_t dictSize, | |
| const ZSTD_CCtx_params* params); | |
| /* ZSTD_writeLastEmptyBlock() : | |
| * output an empty Block with end-of-frame mark to complete a frame | |
| * @return : size of data written into `dst` (== ZSTD_blockHeaderSize (defined in zstd_internal.h)) | |
| * or an error code if `dstCapacity` is too small (<ZSTD_blockHeaderSize) | |
| */ | |
| size_t ZSTD_writeLastEmptyBlock(void* dst, size_t dstCapacity); | |
| /* ZSTD_referenceExternalSequences() : | |
| * Must be called before starting a compression operation. | |
| * seqs must parse a prefix of the source. | |
| * This cannot be used when long range matching is enabled. | |
| * Zstd will use these sequences, and pass the literals to a secondary block | |
| * compressor. | |
| * NOTE: seqs are not verified! Invalid sequences can cause out-of-bounds memory | |
| * access and data corruption. | |
| */ | |
| void ZSTD_referenceExternalSequences(ZSTD_CCtx* cctx, rawSeq* seq, size_t nbSeq); | |
| /* ZSTD_cycleLog() : | |
| * condition for correct operation : hashLog > 1 */ | |
| U32 ZSTD_cycleLog(U32 hashLog, ZSTD_strategy strat); | |
| /* ZSTD_CCtx_trace() : | |
| * Trace the end of a compression call. | |
| */ | |
| void ZSTD_CCtx_trace(ZSTD_CCtx* cctx, size_t extraCSize); | |
| /* Returns 1 if an external sequence producer is registered, otherwise returns 0. */ | |
| MEM_STATIC int ZSTD_hasExtSeqProd(const ZSTD_CCtx_params* params) { | |
| return params->extSeqProdFunc != NULL; | |
| } | |
| /* =============================================================== | |
| * Deprecated definitions that are still used internally to avoid | |
| * deprecation warnings. These functions are exactly equivalent to | |
| * their public variants, but avoid the deprecation warnings. | |
| * =============================================================== */ | |
| size_t ZSTD_compressBegin_usingCDict_deprecated(ZSTD_CCtx* cctx, const ZSTD_CDict* cdict); | |
| size_t ZSTD_compressContinue_public(ZSTD_CCtx* cctx, | |
| void* dst, size_t dstCapacity, | |
| const void* src, size_t srcSize); | |
| size_t ZSTD_compressEnd_public(ZSTD_CCtx* cctx, | |
| void* dst, size_t dstCapacity, | |
| const void* src, size_t srcSize); | |
| size_t ZSTD_compressBlock_deprecated(ZSTD_CCtx* cctx, void* dst, size_t dstCapacity, const void* src, size_t srcSize); | |
| #endif /* ZSTD_COMPRESS_H */ |