| #!/bin/bash | |
| # SPDX-License-Identifier: GPL-2.0 | |
| ALL_TESTS="ping_ipv4 ping_ipv6 learning flooding pvid_change" | |
| NUM_NETIFS=4 | |
| source lib.sh | |
| h1_create() | |
| { | |
| simple_if_init $h1 192.0.2.1/24 2001:db8:1::1/64 | |
| } | |
| h1_destroy() | |
| { | |
| simple_if_fini $h1 192.0.2.1/24 2001:db8:1::1/64 | |
| } | |
| h2_create() | |
| { | |
| simple_if_init $h2 192.0.2.2/24 2001:db8:1::2/64 | |
| } | |
| h2_destroy() | |
| { | |
| simple_if_fini $h2 192.0.2.2/24 2001:db8:1::2/64 | |
| } | |
| switch_create() | |
| { | |
| ip link add dev br0 type bridge \ | |
| ageing_time $LOW_AGEING_TIME \ | |
| mcast_snooping 0 | |
| ip link set dev $swp1 master br0 | |
| ip link set dev $swp2 master br0 | |
| ip link set dev br0 up | |
| ip link set dev $swp1 up | |
| ip link set dev $swp2 up | |
| } | |
| switch_destroy() | |
| { | |
| ip link set dev $swp2 down | |
| ip link set dev $swp1 down | |
| ip link del dev br0 | |
| } | |
| setup_prepare() | |
| { | |
| h1=${NETIFS[p1]} | |
| swp1=${NETIFS[p2]} | |
| swp2=${NETIFS[p3]} | |
| h2=${NETIFS[p4]} | |
| vrf_prepare | |
| h1_create | |
| h2_create | |
| switch_create | |
| } | |
| cleanup() | |
| { | |
| pre_cleanup | |
| switch_destroy | |
| h2_destroy | |
| h1_destroy | |
| vrf_cleanup | |
| } | |
| ping_ipv4() | |
| { | |
| local msg=$1 | |
| ping_test $h1 192.0.2.2 "$msg" | |
| } | |
| ping_ipv6() | |
| { | |
| local msg=$1 | |
| ping6_test $h1 2001:db8:1::2 "$msg" | |
| } | |
| learning() | |
| { | |
| learning_test "br0" $swp1 $h1 $h2 | |
| } | |
| flooding() | |
| { | |
| flood_test $swp2 $h1 $h2 | |
| } | |
| pvid_change() | |
| { | |
| # Test that the changing of the VLAN-aware PVID does not affect | |
| # VLAN-unaware forwarding | |
| bridge vlan add vid 3 dev $swp1 pvid untagged | |
| ping_ipv4 " with bridge port $swp1 PVID changed" | |
| ping_ipv6 " with bridge port $swp1 PVID changed" | |
| bridge vlan del vid 3 dev $swp1 | |
| ping_ipv4 " with bridge port $swp1 PVID deleted" | |
| ping_ipv6 " with bridge port $swp1 PVID deleted" | |
| } | |
| trap cleanup EXIT | |
| setup_prepare | |
| setup_wait | |
| tests_run | |
| exit $EXIT_STATUS |