| # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause |
| %YAML 1.2 |
| --- |
| $id: http://devicetree.org/schemas/display/bridge/ti,tdp158.yaml# |
| $schema: http://devicetree.org/meta-schemas/core.yaml# |
| |
| title: TI TDP158 HDMI to TMDS Redriver |
| |
| maintainers: |
| - Arnaud Vrac <avrac@freebox.fr> |
| - Pierre-Hugues Husson <phhusson@freebox.fr> |
| |
| properties: |
| compatible: |
| const: ti,tdp158 |
| |
| # The reg property is required if and only if the device is connected |
| # to an I2C bus. In pin strap mode, reg must not be specified. |
| reg: |
| description: I2C address of the device |
| |
| # Pin 36 = Operation Enable / Reset Pin |
| # OE = L: Power Down Mode |
| # OE = H: Normal Operation |
| # Internal weak pullup - device resets on H to L transitions |
| enable-gpios: |
| description: GPIO controlling bridge enable |
| |
| vcc-supply: |
| description: Power supply 3.3V |
| |
| vdd-supply: |
| description: Power supply 1.1V |
| |
| ports: |
| $ref: /schemas/graph.yaml#/properties/ports |
| |
| properties: |
| port@0: |
| $ref: /schemas/graph.yaml#/properties/port |
| description: Bridge input |
| |
| port@1: |
| $ref: /schemas/graph.yaml#/properties/port |
| description: Bridge output |
| |
| required: |
| - port@0 |
| - port@1 |
| |
| required: |
| - compatible |
| - vcc-supply |
| - vdd-supply |
| - ports |
| |
| additionalProperties: false |
