| # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause |
| %YAML 1.2 |
| --- |
| $id: http://devicetree.org/schemas/leds/nxp,pca955x.yaml# |
| $schema: http://devicetree.org/meta-schemas/core.yaml# |
| |
| title: NXP PCA955X LED controllers |
| |
| maintainers: |
| - Nate Case <ncase@xes-inc.com> |
| |
| description: | |
| The PCA955x family of chips are I2C LED blinkers whose pins not used |
| to control LEDs can be used as general purpose I/Os. The GPIO pins can |
| be input or output, and output pins can also be pulse-width controlled. |
| |
| For more product information please see the link below: |
| - https://www.nxp.com/docs/en/data-sheet/PCA9552.pdf |
| |
| properties: |
| compatible: |
| enum: |
| - nxp,pca9550 |
| - nxp,pca9551 |
| - nxp,pca9552 |
| - ibm,pca9552 |
| - nxp,pca9553 |
| |
| reg: |
| maxItems: 1 |
| |
| "#address-cells": |
| const: 1 |
| |
| "#size-cells": |
| const: 0 |
| |
| gpio-controller: true |
| |
| gpio-line-names: |
| minItems: 1 |
| maxItems: 16 |
| |
| "#gpio-cells": |
| const: 2 |
| |
| patternProperties: |
| "^led@[0-9a-f]$": |
| type: object |
| $ref: common.yaml# |
| unevaluatedProperties: false |
| |
| properties: |
| reg: |
| maxItems: 1 |
| type: |
| description: | |
| Output configuration, see include/dt-bindings/leds/leds-pca955x.h |
| $ref: /schemas/types.yaml#/definitions/uint32 |
| default: 0 |
| minimum: 0 |
| maximum: 2 |
| |
| required: |
| - reg |
| |
| allOf: |
| - if: |
| properties: |
| compatible: |
| contains: |
| enum: |
| - nxp,pca9550 |
| then: |
| patternProperties: |
| "^led@[0-9a-f]$": |
| properties: |
| reg: |
| maximum: 1 |
| - if: |
| properties: |
| compatible: |
| contains: |
| enum: |
| - nxp,pca9551 |
| then: |
| patternProperties: |
| "^led@[0-9a-f]$": |
| properties: |
| reg: |
| maximum: 7 |
| - if: |
| properties: |
| compatible: |
| contains: |
| enum: |
| - nxp,pca9552 |
| - ibm,pca9552 |
| then: |
| patternProperties: |
| "^led@[0-9a-f]$": |
| properties: |
| reg: |
| maximum: 15 |
| - if: |
| properties: |
| compatible: |
| contains: |
| enum: |
| - nxp,pca9553 |
| then: |
| patternProperties: |
| "^led@[0-9a-f]$": |
| properties: |
| reg: |
| maximum: 3 |
| |
| additionalProperties: false |
| |
| examples: |
| - | |
| #include <dt-bindings/leds/leds-pca955x.h> |
| |
| i2c { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| led-controller@60 { |
| compatible = "nxp,pca9552"; |
| reg = <0x60>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| led@0 { |
| reg = <0>; |
| label = "red:power"; |
| linux,default-trigger = "default-on"; |
| type = <PCA955X_TYPE_LED>; |
| }; |
| led@1 { |
| reg = <1>; |
| label = "green:power"; |
| type = <PCA955X_TYPE_LED>; |
| }; |
| led@2 { |
| reg = <2>; |
| label = "pca9552:yellow"; |
| type = <PCA955X_TYPE_LED>; |
| }; |
| led@3 { |
| reg = <3>; |
| label = "pca9552:white"; |
| type = <PCA955X_TYPE_LED>; |
| }; |
| }; |
| }; |
| |
| ... |