| // SPDX-License-Identifier: GPL-2.0-only |
| // |
| // Generated with linux-mdss-dsi-panel-driver-generator from vendor device tree: |
| // Copyright (c) 2013, The Linux Foundation. All rights reserved. |
| // Copyright (c) 2024 Dzmitry Sankouski <dsankouski@gmail.com> |
| |
| #include <linux/delay.h> |
| #include <linux/gpio/consumer.h> |
| #include <linux/module.h> |
| #include <linux/of.h> |
| #include <linux/regulator/consumer.h> |
| |
| #include <drm/display/drm_dsc.h> |
| #include <drm/display/drm_dsc_helper.h> |
| #include <drm/drm_mipi_dsi.h> |
| #include <drm/drm_probe_helper.h> |
| #include <drm/drm_panel.h> |
| |
| struct s6e3ha8 { |
| struct drm_panel panel; |
| struct mipi_dsi_device *dsi; |
| struct drm_dsc_config dsc; |
| struct gpio_desc *reset_gpio; |
| struct regulator_bulk_data *supplies; |
| }; |
| |
| static const struct regulator_bulk_data s6e3ha8_supplies[] = { |
| { .supply = "vdd3" }, |
| { .supply = "vci" }, |
| { .supply = "vddr" }, |
| }; |
| |
| static inline |
| struct s6e3ha8 *to_s6e3ha8_amb577px01_wqhd(struct drm_panel *panel) |
| { |
| return container_of(panel, struct s6e3ha8, panel); |
| } |
| |
| #define s6e3ha8_test_key_on_lvl2(ctx) \ |
| mipi_dsi_dcs_write_seq_multi(ctx, 0xf0, 0x5a, 0x5a) |
| #define s6e3ha8_test_key_off_lvl2(ctx) \ |
| mipi_dsi_dcs_write_seq_multi(ctx, 0xf0, 0xa5, 0xa5) |
| #define s6e3ha8_test_key_on_lvl3(ctx) \ |
| mipi_dsi_dcs_write_seq_multi(ctx, 0xfc, 0x5a, 0x5a) |
| #define s6e3ha8_test_key_off_lvl3(ctx) \ |
| mipi_dsi_dcs_write_seq_multi(ctx, 0xfc, 0xa5, 0xa5) |
| #define s6e3ha8_test_key_on_lvl1(ctx) \ |
| mipi_dsi_dcs_write_seq_multi(ctx, 0x9f, 0xa5, 0xa5) |
| #define s6e3ha8_test_key_off_lvl1(ctx) \ |
| mipi_dsi_dcs_write_seq_multi(ctx, 0x9f, 0x5a, 0x5a) |
| #define s6e3ha8_afc_off(ctx) \ |
| mipi_dsi_dcs_write_seq_multi(ctx, 0xe2, 0x00, 0x00) |
| |
| static void s6e3ha8_amb577px01_wqhd_reset(struct s6e3ha8 *priv) |
| { |
| gpiod_set_value_cansleep(priv->reset_gpio, 1); |
| usleep_range(5000, 6000); |
| gpiod_set_value_cansleep(priv->reset_gpio, 0); |
| usleep_range(5000, 6000); |
| gpiod_set_value_cansleep(priv->reset_gpio, 1); |
| usleep_range(5000, 6000); |
| } |
| |
| static int s6e3ha8_amb577px01_wqhd_on(struct s6e3ha8 *priv) |
| { |
| struct mipi_dsi_device *dsi = priv->dsi; |
| struct mipi_dsi_multi_context ctx = { .dsi = dsi }; |
| |
| dsi->mode_flags |= MIPI_DSI_MODE_LPM; |
| |
| s6e3ha8_test_key_on_lvl1(&ctx); |
| |
| s6e3ha8_test_key_on_lvl2(&ctx); |
| mipi_dsi_compression_mode_multi(&ctx, true); |
| s6e3ha8_test_key_off_lvl2(&ctx); |
| |
| mipi_dsi_dcs_exit_sleep_mode_multi(&ctx); |
| usleep_range(5000, 6000); |
| |
| s6e3ha8_test_key_on_lvl2(&ctx); |
| mipi_dsi_dcs_write_seq_multi(&ctx, 0xf2, 0x13); |
| s6e3ha8_test_key_off_lvl2(&ctx); |
| usleep_range(10000, 11000); |
| |
| s6e3ha8_test_key_on_lvl2(&ctx); |
| mipi_dsi_dcs_write_seq_multi(&ctx, 0xf2, 0x13); |
| s6e3ha8_test_key_off_lvl2(&ctx); |
| |
| /* OMOK setting 1 (Initial setting) - Scaler Latch Setting Guide */ |
| s6e3ha8_test_key_on_lvl2(&ctx); |
| mipi_dsi_dcs_write_seq_multi(&ctx, 0xb0, 0x07); |
| /* latch setting 1 : Scaler on/off & address setting & PPS setting -> Image update latch */ |
| mipi_dsi_dcs_write_seq_multi(&ctx, 0xf2, 0x3c, 0x10); |
| mipi_dsi_dcs_write_seq_multi(&ctx, 0xb0, 0x0b); |
| /* latch setting 2 : Ratio change mode -> Image update latch */ |
| mipi_dsi_dcs_write_seq_multi(&ctx, 0xf2, 0x30); |
| /* OMOK setting 2 - Seamless setting guide : WQHD */ |
| mipi_dsi_dcs_write_seq_multi(&ctx, 0x2a, 0x00, 0x00, 0x05, 0x9f); /* CASET */ |
| mipi_dsi_dcs_write_seq_multi(&ctx, 0x2b, 0x00, 0x00, 0x0b, 0x8f); /* PASET */ |
| mipi_dsi_dcs_write_seq_multi(&ctx, 0xba, 0x01); /* scaler setup : scaler off */ |
| s6e3ha8_test_key_off_lvl2(&ctx); |
| |
| mipi_dsi_dcs_write_seq_multi(&ctx, 0x35, 0x00); /* TE Vsync ON */ |
| |
| s6e3ha8_test_key_on_lvl2(&ctx); |
| mipi_dsi_dcs_write_seq_multi(&ctx, 0xed, 0x4c); /* ERR_FG */ |
| s6e3ha8_test_key_off_lvl2(&ctx); |
| |
| s6e3ha8_test_key_on_lvl3(&ctx); |
| /* FFC Setting 897.6Mbps */ |
| mipi_dsi_dcs_write_seq_multi(&ctx, 0xc5, 0x0d, 0x10, 0xb4, 0x3e, 0x01); |
| s6e3ha8_test_key_off_lvl3(&ctx); |
| |
| s6e3ha8_test_key_on_lvl2(&ctx); |
| mipi_dsi_dcs_write_seq_multi(&ctx, 0xb9, |
| 0x00, 0xb0, 0x81, 0x09, 0x00, 0x00, 0x00, |
| 0x11, 0x03); /* TSP HSYNC Setting */ |
| s6e3ha8_test_key_off_lvl2(&ctx); |
| |
| s6e3ha8_test_key_on_lvl2(&ctx); |
| mipi_dsi_dcs_write_seq_multi(&ctx, 0xb0, 0x03); |
| mipi_dsi_dcs_write_seq_multi(&ctx, 0xf6, 0x43); |
| s6e3ha8_test_key_off_lvl2(&ctx); |
| |
| s6e3ha8_test_key_on_lvl2(&ctx); |
| /* Brightness condition set */ |
| mipi_dsi_dcs_write_seq_multi(&ctx, 0xca, |
| 0x07, 0x00, 0x00, 0x00, 0x80, 0x80, 0x80, |
| 0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0x80, |
| 0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0x80, |
| 0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0x80, |
| 0x80, 0x80, 0x80, 0x00, 0x00, 0x00); |
| mipi_dsi_dcs_write_seq_multi(&ctx, 0xb1, 0x00, 0x0c); /* AID Set : 0% */ |
| mipi_dsi_dcs_write_seq_multi(&ctx, 0xb5, |
| 0x19, 0xdc, 0x16, 0x01, 0x34, 0x67, 0x9a, |
| 0xcd, 0x01, 0x22, 0x33, 0x44, 0x00, 0x00, |
| 0x05, 0x55, 0xcc, 0x0c, 0x01, 0x11, 0x11, |
| 0x10); /* MPS/ELVSS Setting */ |
| mipi_dsi_dcs_write_seq_multi(&ctx, 0xf4, 0xeb, 0x28); /* VINT */ |
| mipi_dsi_dcs_write_seq_multi(&ctx, 0xf7, 0x03); /* Gamma, LTPS(AID) update */ |
| s6e3ha8_test_key_off_lvl2(&ctx); |
| |
| s6e3ha8_test_key_off_lvl1(&ctx); |
| |
| return ctx.accum_err; |
| } |
| |
| static int s6e3ha8_enable(struct drm_panel *panel) |
| { |
| struct s6e3ha8 *priv = to_s6e3ha8_amb577px01_wqhd(panel); |
| struct mipi_dsi_device *dsi = priv->dsi; |
| struct mipi_dsi_multi_context ctx = { .dsi = dsi }; |
| |
| s6e3ha8_test_key_on_lvl1(&ctx); |
| mipi_dsi_dcs_set_display_on_multi(&ctx); |
| s6e3ha8_test_key_off_lvl1(&ctx); |
| |
| return ctx.accum_err; |
| } |
| |
| static int s6e3ha8_disable(struct drm_panel *panel) |
| { |
| struct s6e3ha8 *priv = to_s6e3ha8_amb577px01_wqhd(panel); |
| struct mipi_dsi_device *dsi = priv->dsi; |
| struct mipi_dsi_multi_context ctx = { .dsi = dsi }; |
| |
| s6e3ha8_test_key_on_lvl1(&ctx); |
| mipi_dsi_dcs_set_display_off_multi(&ctx); |
| s6e3ha8_test_key_off_lvl1(&ctx); |
| mipi_dsi_msleep(&ctx, 20); |
| |
| s6e3ha8_test_key_on_lvl2(&ctx); |
| s6e3ha8_afc_off(&ctx); |
| s6e3ha8_test_key_off_lvl2(&ctx); |
| |
| mipi_dsi_msleep(&ctx, 160); |
| |
| return ctx.accum_err; |
| } |
| |
| static int s6e3ha8_amb577px01_wqhd_prepare(struct drm_panel *panel) |
| { |
| struct s6e3ha8 *priv = to_s6e3ha8_amb577px01_wqhd(panel); |
| struct mipi_dsi_device *dsi = priv->dsi; |
| struct mipi_dsi_multi_context ctx = { .dsi = dsi }; |
| struct drm_dsc_picture_parameter_set pps; |
| int ret; |
| |
| ret = regulator_bulk_enable(ARRAY_SIZE(s6e3ha8_supplies), priv->supplies); |
| if (ret < 0) |
| return ret; |
| mipi_dsi_msleep(&ctx, 120); |
| s6e3ha8_amb577px01_wqhd_reset(priv); |
| |
| ret = s6e3ha8_amb577px01_wqhd_on(priv); |
| if (ret < 0) { |
| gpiod_set_value_cansleep(priv->reset_gpio, 1); |
| goto err; |
| } |
| |
| drm_dsc_pps_payload_pack(&pps, &priv->dsc); |
| |
| s6e3ha8_test_key_on_lvl1(&ctx); |
| mipi_dsi_picture_parameter_set_multi(&ctx, &pps); |
| s6e3ha8_test_key_off_lvl1(&ctx); |
| |
| mipi_dsi_msleep(&ctx, 28); |
| |
| return ctx.accum_err; |
| err: |
| regulator_bulk_disable(ARRAY_SIZE(s6e3ha8_supplies), priv->supplies); |
| return ret; |
| } |
| |
| static int s6e3ha8_amb577px01_wqhd_unprepare(struct drm_panel *panel) |
| { |
| struct s6e3ha8 *priv = to_s6e3ha8_amb577px01_wqhd(panel); |
| |
| return regulator_bulk_disable(ARRAY_SIZE(s6e3ha8_supplies), priv->supplies); |
| } |
| |
| static const struct drm_display_mode s6e3ha8_amb577px01_wqhd_mode = { |
| .clock = (1440 + 116 + 44 + 120) * (2960 + 120 + 80 + 124) * 60 / 1000, |
| .hdisplay = 1440, |
| .hsync_start = 1440 + 116, |
| .hsync_end = 1440 + 116 + 44, |
| .htotal = 1440 + 116 + 44 + 120, |
| .vdisplay = 2960, |
| .vsync_start = 2960 + 120, |
| .vsync_end = 2960 + 120 + 80, |
| .vtotal = 2960 + 120 + 80 + 124, |
| .width_mm = 64, |
| .height_mm = 132, |
| }; |
| |
| static int s6e3ha8_amb577px01_wqhd_get_modes(struct drm_panel *panel, |
| struct drm_connector *connector) |
| { |
| return drm_connector_helper_get_modes_fixed(connector, &s6e3ha8_amb577px01_wqhd_mode); |
| } |
| |
| static const struct drm_panel_funcs s6e3ha8_amb577px01_wqhd_panel_funcs = { |
| .prepare = s6e3ha8_amb577px01_wqhd_prepare, |
| .unprepare = s6e3ha8_amb577px01_wqhd_unprepare, |
| .get_modes = s6e3ha8_amb577px01_wqhd_get_modes, |
| .enable = s6e3ha8_enable, |
| .disable = s6e3ha8_disable, |
| }; |
| |
| static int s6e3ha8_amb577px01_wqhd_probe(struct mipi_dsi_device *dsi) |
| { |
| struct device *dev = &dsi->dev; |
| struct s6e3ha8 *priv; |
| int ret; |
| |
| priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); |
| if (!priv) |
| return -ENOMEM; |
| |
| ret = devm_regulator_bulk_get_const(dev, ARRAY_SIZE(s6e3ha8_supplies), |
| s6e3ha8_supplies, |
| &priv->supplies); |
| if (ret < 0) { |
| dev_err(dev, "failed to get regulators: %d\n", ret); |
| return ret; |
| } |
| |
| priv->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH); |
| if (IS_ERR(priv->reset_gpio)) |
| return dev_err_probe(dev, PTR_ERR(priv->reset_gpio), |
| "Failed to get reset-gpios\n"); |
| |
| priv->dsi = dsi; |
| mipi_dsi_set_drvdata(dsi, priv); |
| |
| dsi->lanes = 4; |
| dsi->format = MIPI_DSI_FMT_RGB888; |
| dsi->mode_flags = MIPI_DSI_CLOCK_NON_CONTINUOUS | |
| MIPI_DSI_MODE_VIDEO_NO_HFP | MIPI_DSI_MODE_VIDEO_NO_HBP | |
| MIPI_DSI_MODE_VIDEO_NO_HSA | MIPI_DSI_MODE_NO_EOT_PACKET; |
| |
| drm_panel_init(&priv->panel, dev, &s6e3ha8_amb577px01_wqhd_panel_funcs, |
| DRM_MODE_CONNECTOR_DSI); |
| priv->panel.prepare_prev_first = true; |
| |
| drm_panel_add(&priv->panel); |
| |
| /* This panel only supports DSC; unconditionally enable it */ |
| dsi->dsc = &priv->dsc; |
| |
| priv->dsc.dsc_version_major = 1; |
| priv->dsc.dsc_version_minor = 1; |
| |
| priv->dsc.slice_height = 40; |
| priv->dsc.slice_width = 720; |
| WARN_ON(1440 % priv->dsc.slice_width); |
| priv->dsc.slice_count = 1440 / priv->dsc.slice_width; |
| priv->dsc.bits_per_component = 8; |
| priv->dsc.bits_per_pixel = 8 << 4; /* 4 fractional bits */ |
| priv->dsc.block_pred_enable = true; |
| |
| ret = mipi_dsi_attach(dsi); |
| if (ret < 0) { |
| dev_err(dev, "Failed to attach to DSI host: %d\n", ret); |
| drm_panel_remove(&priv->panel); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static void s6e3ha8_amb577px01_wqhd_remove(struct mipi_dsi_device *dsi) |
| { |
| struct s6e3ha8 *priv = mipi_dsi_get_drvdata(dsi); |
| int ret; |
| |
| ret = mipi_dsi_detach(dsi); |
| if (ret < 0) |
| dev_err(&dsi->dev, "Failed to detach from DSI host: %d\n", ret); |
| |
| drm_panel_remove(&priv->panel); |
| } |
| |
| static const struct of_device_id s6e3ha8_amb577px01_wqhd_of_match[] = { |
| { .compatible = "samsung,s6e3ha8" }, |
| { /* sentinel */ } |
| }; |
| MODULE_DEVICE_TABLE(of, s6e3ha8_amb577px01_wqhd_of_match); |
| |
| static struct mipi_dsi_driver s6e3ha8_amb577px01_wqhd_driver = { |
| .probe = s6e3ha8_amb577px01_wqhd_probe, |
| .remove = s6e3ha8_amb577px01_wqhd_remove, |
| .driver = { |
| .name = "panel-s6e3ha8", |
| .of_match_table = s6e3ha8_amb577px01_wqhd_of_match, |
| }, |
| }; |
| module_mipi_dsi_driver(s6e3ha8_amb577px01_wqhd_driver); |
| |
| MODULE_AUTHOR("Dzmitry Sankouski <dsankouski@gmail.com>"); |
| MODULE_DESCRIPTION("DRM driver for S6E3HA8 panel"); |
| MODULE_LICENSE("GPL"); |