| // SPDX-License-Identifier: GPL-2.0-or-later | 
 | /*-*-linux-c-*-*/ | 
 |  | 
 | /* | 
 |   Copyright (C) 2007,2008 Jonathan Woithe <jwoithe@just42.net> | 
 |   Copyright (C) 2008 Peter Gruber <nokos@gmx.net> | 
 |   Copyright (C) 2008 Tony Vroon <tony@linx.net> | 
 |   Based on earlier work: | 
 |     Copyright (C) 2003 Shane Spencer <shane@bogomip.com> | 
 |     Adrian Yee <brewt-fujitsu@brewt.org> | 
 |  | 
 |   Templated from msi-laptop.c and thinkpad_acpi.c which is copyright | 
 |   by its respective authors. | 
 |  | 
 |  */ | 
 |  | 
 | /* | 
 |  * fujitsu-laptop.c - Fujitsu laptop support, providing access to additional | 
 |  * features made available on a range of Fujitsu laptops including the | 
 |  * P2xxx/P5xxx/S6xxx/S7xxx series. | 
 |  * | 
 |  * This driver implements a vendor-specific backlight control interface for | 
 |  * Fujitsu laptops and provides support for hotkeys present on certain Fujitsu | 
 |  * laptops. | 
 |  * | 
 |  * This driver has been tested on a Fujitsu Lifebook S6410, S7020 and | 
 |  * P8010.  It should work on most P-series and S-series Lifebooks, but | 
 |  * YMMV. | 
 |  * | 
 |  * The module parameter use_alt_lcd_levels switches between different ACPI | 
 |  * brightness controls which are used by different Fujitsu laptops.  In most | 
 |  * cases the correct method is automatically detected. "use_alt_lcd_levels=1" | 
 |  * is applicable for a Fujitsu Lifebook S6410 if autodetection fails. | 
 |  * | 
 |  */ | 
 |  | 
 | #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt | 
 |  | 
 | #include <linux/module.h> | 
 | #include <linux/kernel.h> | 
 | #include <linux/init.h> | 
 | #include <linux/acpi.h> | 
 | #include <linux/bitops.h> | 
 | #include <linux/dmi.h> | 
 | #include <linux/backlight.h> | 
 | #include <linux/input.h> | 
 | #include <linux/input/sparse-keymap.h> | 
 | #include <linux/kfifo.h> | 
 | #include <linux/leds.h> | 
 | #include <linux/platform_device.h> | 
 | #include <linux/power_supply.h> | 
 | #include <acpi/battery.h> | 
 | #include <acpi/video.h> | 
 |  | 
 | #define FUJITSU_DRIVER_VERSION		"0.6.0" | 
 |  | 
 | #define FUJITSU_LCD_N_LEVELS		8 | 
 |  | 
 | #define ACPI_FUJITSU_CLASS		"fujitsu" | 
 | #define ACPI_FUJITSU_BL_HID		"FUJ02B1" | 
 | #define ACPI_FUJITSU_BL_DRIVER_NAME	"Fujitsu laptop FUJ02B1 ACPI brightness driver" | 
 | #define ACPI_FUJITSU_BL_DEVICE_NAME	"Fujitsu FUJ02B1" | 
 | #define ACPI_FUJITSU_LAPTOP_HID		"FUJ02E3" | 
 | #define ACPI_FUJITSU_LAPTOP_DRIVER_NAME	"Fujitsu laptop FUJ02E3 ACPI hotkeys driver" | 
 | #define ACPI_FUJITSU_LAPTOP_DEVICE_NAME	"Fujitsu FUJ02E3" | 
 |  | 
 | #define ACPI_FUJITSU_NOTIFY_CODE	0x80 | 
 |  | 
 | /* FUNC interface - command values */ | 
 | #define FUNC_FLAGS			BIT(12) | 
 | #define FUNC_LEDS			(BIT(12) | BIT(0)) | 
 | #define FUNC_BUTTONS			(BIT(12) | BIT(1)) | 
 | #define FUNC_BACKLIGHT			(BIT(12) | BIT(2)) | 
 |  | 
 | /* FUNC interface - responses */ | 
 | #define UNSUPPORTED_CMD			0x80000000 | 
 |  | 
 | /* FUNC interface - status flags */ | 
 | #define FLAG_RFKILL			BIT(5) | 
 | #define FLAG_LID			BIT(8) | 
 | #define FLAG_DOCK			BIT(9) | 
 | #define FLAG_TOUCHPAD_TOGGLE		BIT(26) | 
 | #define FLAG_MICMUTE			BIT(29) | 
 | #define FLAG_SOFTKEYS			(FLAG_RFKILL | FLAG_TOUCHPAD_TOGGLE | FLAG_MICMUTE) | 
 |  | 
 | /* FUNC interface - LED control */ | 
 | #define FUNC_LED_OFF			BIT(0) | 
 | #define FUNC_LED_ON			(BIT(0) | BIT(16) | BIT(17)) | 
 | #define LOGOLAMP_POWERON		BIT(13) | 
 | #define LOGOLAMP_ALWAYS			BIT(14) | 
 | #define KEYBOARD_LAMPS			BIT(8) | 
 | #define RADIO_LED_ON			BIT(5) | 
 | #define ECO_LED				BIT(16) | 
 | #define ECO_LED_ON			BIT(19) | 
 |  | 
 | /* FUNC interface - backlight power control */ | 
 | #define BACKLIGHT_PARAM_POWER		BIT(2) | 
 | #define BACKLIGHT_OFF			(BIT(0) | BIT(1)) | 
 | #define BACKLIGHT_ON			0 | 
 |  | 
 | /* FUNC interface - battery control interface */ | 
 | #define FUNC_S006_METHOD		0x1006 | 
 | #define CHARGE_CONTROL_RW		0x21 | 
 |  | 
 | /* Scancodes read from the GIRB register */ | 
 | #define KEY1_CODE			0x410 | 
 | #define KEY2_CODE			0x411 | 
 | #define KEY3_CODE			0x412 | 
 | #define KEY4_CODE			0x413 | 
 | #define KEY5_CODE			0x420 | 
 |  | 
 | /* Hotkey ringbuffer limits */ | 
 | #define MAX_HOTKEY_RINGBUFFER_SIZE	100 | 
 | #define RINGBUFFERSIZE			40 | 
 |  | 
 | /* Module parameters */ | 
 | static int use_alt_lcd_levels = -1; | 
 | static bool disable_brightness_adjust; | 
 |  | 
 | /* Device controlling the backlight and associated keys */ | 
 | struct fujitsu_bl { | 
 | 	struct input_dev *input; | 
 | 	char phys[32]; | 
 | 	struct backlight_device *bl_device; | 
 | 	unsigned int max_brightness; | 
 | 	unsigned int brightness_level; | 
 | }; | 
 |  | 
 | static struct fujitsu_bl *fujitsu_bl; | 
 |  | 
 | /* Device used to access hotkeys and other features on the laptop */ | 
 | struct fujitsu_laptop { | 
 | 	struct input_dev *input; | 
 | 	char phys[32]; | 
 | 	struct platform_device *pf_device; | 
 | 	struct kfifo fifo; | 
 | 	spinlock_t fifo_lock; | 
 | 	int flags_supported; | 
 | 	int flags_state; | 
 | 	bool charge_control_supported; | 
 | }; | 
 |  | 
 | static struct acpi_device *fext; | 
 |  | 
 | /* Fujitsu ACPI interface function */ | 
 |  | 
 | static int call_fext_func(struct acpi_device *device, | 
 | 			  int func, int op, int feature, int state) | 
 | { | 
 | 	union acpi_object params[4] = { | 
 | 		{ .integer.type = ACPI_TYPE_INTEGER, .integer.value = func }, | 
 | 		{ .integer.type = ACPI_TYPE_INTEGER, .integer.value = op }, | 
 | 		{ .integer.type = ACPI_TYPE_INTEGER, .integer.value = feature }, | 
 | 		{ .integer.type = ACPI_TYPE_INTEGER, .integer.value = state } | 
 | 	}; | 
 | 	struct acpi_object_list arg_list = { 4, params }; | 
 | 	unsigned long long value; | 
 | 	acpi_status status; | 
 |  | 
 | 	status = acpi_evaluate_integer(device->handle, "FUNC", &arg_list, | 
 | 				       &value); | 
 | 	if (ACPI_FAILURE(status)) { | 
 | 		acpi_handle_err(device->handle, "Failed to evaluate FUNC\n"); | 
 | 		return -ENODEV; | 
 | 	} | 
 |  | 
 | 	acpi_handle_debug(device->handle, | 
 | 			  "FUNC 0x%x (args 0x%x, 0x%x, 0x%x) returned 0x%x\n", | 
 | 			  func, op, feature, state, (int)value); | 
 | 	return value; | 
 | } | 
 |  | 
 | /* Battery charge control code */ | 
 | static ssize_t charge_control_end_threshold_store(struct device *dev, | 
 | 				struct device_attribute *attr, | 
 | 				const char *buf, size_t count) | 
 | { | 
 | 	int cc_end_value, s006_cc_return; | 
 | 	int value, ret; | 
 |  | 
 | 	ret = kstrtouint(buf, 10, &value); | 
 | 	if (ret) | 
 | 		return ret; | 
 |  | 
 | 	if (value < 50 || value > 100) | 
 | 		return -EINVAL; | 
 |  | 
 | 	cc_end_value = value * 0x100 + 0x20; | 
 | 	s006_cc_return = call_fext_func(fext, FUNC_S006_METHOD, | 
 | 					CHARGE_CONTROL_RW, cc_end_value, 0x0); | 
 | 	if (s006_cc_return < 0) | 
 | 		return s006_cc_return; | 
 | 	/* | 
 | 	 * The S006 0x21 method returns 0x00 in case the provided value | 
 | 	 * is invalid. | 
 | 	 */ | 
 | 	if (s006_cc_return == 0x00) | 
 | 		return -EINVAL; | 
 |  | 
 | 	return count; | 
 | } | 
 |  | 
 | static ssize_t charge_control_end_threshold_show(struct device *dev, | 
 | 				struct device_attribute *attr, | 
 | 				char *buf) | 
 | { | 
 | 	int status; | 
 |  | 
 | 	status = call_fext_func(fext, FUNC_S006_METHOD, | 
 | 				CHARGE_CONTROL_RW, 0x21, 0x0); | 
 | 	if (status < 0) | 
 | 		return status; | 
 |  | 
 | 	return sysfs_emit(buf, "%d\n", status); | 
 | } | 
 |  | 
 | static DEVICE_ATTR_RW(charge_control_end_threshold); | 
 |  | 
 | /* ACPI battery hook */ | 
 | static int fujitsu_battery_add_hook(struct power_supply *battery, | 
 | 			       struct acpi_battery_hook *hook) | 
 | { | 
 | 	return device_create_file(&battery->dev, | 
 | 				  &dev_attr_charge_control_end_threshold); | 
 | } | 
 |  | 
 | static int fujitsu_battery_remove_hook(struct power_supply *battery, | 
 | 				  struct acpi_battery_hook *hook) | 
 | { | 
 | 	device_remove_file(&battery->dev, | 
 | 			   &dev_attr_charge_control_end_threshold); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static struct acpi_battery_hook battery_hook = { | 
 | 	.add_battery = fujitsu_battery_add_hook, | 
 | 	.remove_battery = fujitsu_battery_remove_hook, | 
 | 	.name = "Fujitsu Battery Extension", | 
 | }; | 
 |  | 
 | /* | 
 |  * These functions are intended to be called from acpi_fujitsu_laptop_add and | 
 |  * acpi_fujitsu_laptop_remove. | 
 |  */ | 
 | static int fujitsu_battery_charge_control_add(struct acpi_device *device) | 
 | { | 
 | 	struct fujitsu_laptop *priv = acpi_driver_data(device); | 
 | 	int s006_cc_return; | 
 |  | 
 | 	priv->charge_control_supported = false; | 
 | 	/* | 
 | 	 * Check if the S006 0x21 method exists by trying to get the current | 
 | 	 * battery charge limit. | 
 | 	 */ | 
 | 	s006_cc_return = call_fext_func(fext, FUNC_S006_METHOD, | 
 | 					CHARGE_CONTROL_RW, 0x21, 0x0); | 
 | 	if (s006_cc_return < 0) | 
 | 		return s006_cc_return; | 
 | 	if (s006_cc_return == UNSUPPORTED_CMD) | 
 | 		return -ENODEV; | 
 |  | 
 | 	priv->charge_control_supported = true; | 
 | 	battery_hook_register(&battery_hook); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void fujitsu_battery_charge_control_remove(struct acpi_device *device) | 
 | { | 
 | 	struct fujitsu_laptop *priv = acpi_driver_data(device); | 
 |  | 
 | 	if (priv->charge_control_supported) | 
 | 		battery_hook_unregister(&battery_hook); | 
 | } | 
 |  | 
 | /* Hardware access for LCD brightness control */ | 
 |  | 
 | static int set_lcd_level(struct acpi_device *device, int level) | 
 | { | 
 | 	struct fujitsu_bl *priv = acpi_driver_data(device); | 
 | 	acpi_status status; | 
 | 	char *method; | 
 |  | 
 | 	switch (use_alt_lcd_levels) { | 
 | 	case -1: | 
 | 		if (acpi_has_method(device->handle, "SBL2")) | 
 | 			method = "SBL2"; | 
 | 		else | 
 | 			method = "SBLL"; | 
 | 		break; | 
 | 	case 1: | 
 | 		method = "SBL2"; | 
 | 		break; | 
 | 	default: | 
 | 		method = "SBLL"; | 
 | 		break; | 
 | 	} | 
 |  | 
 | 	acpi_handle_debug(device->handle, "set lcd level via %s [%d]\n", method, | 
 | 			  level); | 
 |  | 
 | 	if (level < 0 || level >= priv->max_brightness) | 
 | 		return -EINVAL; | 
 |  | 
 | 	status = acpi_execute_simple_method(device->handle, method, level); | 
 | 	if (ACPI_FAILURE(status)) { | 
 | 		acpi_handle_err(device->handle, "Failed to evaluate %s\n", | 
 | 				method); | 
 | 		return -ENODEV; | 
 | 	} | 
 |  | 
 | 	priv->brightness_level = level; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int get_lcd_level(struct acpi_device *device) | 
 | { | 
 | 	struct fujitsu_bl *priv = acpi_driver_data(device); | 
 | 	unsigned long long state = 0; | 
 | 	acpi_status status = AE_OK; | 
 |  | 
 | 	acpi_handle_debug(device->handle, "get lcd level via GBLL\n"); | 
 |  | 
 | 	status = acpi_evaluate_integer(device->handle, "GBLL", NULL, &state); | 
 | 	if (ACPI_FAILURE(status)) | 
 | 		return 0; | 
 |  | 
 | 	priv->brightness_level = state & 0x0fffffff; | 
 |  | 
 | 	return priv->brightness_level; | 
 | } | 
 |  | 
 | static int get_max_brightness(struct acpi_device *device) | 
 | { | 
 | 	struct fujitsu_bl *priv = acpi_driver_data(device); | 
 | 	unsigned long long state = 0; | 
 | 	acpi_status status = AE_OK; | 
 |  | 
 | 	acpi_handle_debug(device->handle, "get max lcd level via RBLL\n"); | 
 |  | 
 | 	status = acpi_evaluate_integer(device->handle, "RBLL", NULL, &state); | 
 | 	if (ACPI_FAILURE(status)) | 
 | 		return -1; | 
 |  | 
 | 	priv->max_brightness = state; | 
 |  | 
 | 	return priv->max_brightness; | 
 | } | 
 |  | 
 | /* Backlight device stuff */ | 
 |  | 
 | static int bl_get_brightness(struct backlight_device *b) | 
 | { | 
 | 	struct acpi_device *device = bl_get_data(b); | 
 |  | 
 | 	return b->props.power == BACKLIGHT_POWER_OFF ? 0 : get_lcd_level(device); | 
 | } | 
 |  | 
 | static int bl_update_status(struct backlight_device *b) | 
 | { | 
 | 	struct acpi_device *device = bl_get_data(b); | 
 |  | 
 | 	if (fext) { | 
 | 		if (b->props.power == BACKLIGHT_POWER_OFF) | 
 | 			call_fext_func(fext, FUNC_BACKLIGHT, 0x1, | 
 | 				       BACKLIGHT_PARAM_POWER, BACKLIGHT_OFF); | 
 | 		else | 
 | 			call_fext_func(fext, FUNC_BACKLIGHT, 0x1, | 
 | 				       BACKLIGHT_PARAM_POWER, BACKLIGHT_ON); | 
 | 	} | 
 |  | 
 | 	return set_lcd_level(device, b->props.brightness); | 
 | } | 
 |  | 
 | static const struct backlight_ops fujitsu_bl_ops = { | 
 | 	.get_brightness = bl_get_brightness, | 
 | 	.update_status = bl_update_status, | 
 | }; | 
 |  | 
 | static ssize_t lid_show(struct device *dev, struct device_attribute *attr, | 
 | 			char *buf) | 
 | { | 
 | 	struct fujitsu_laptop *priv = dev_get_drvdata(dev); | 
 |  | 
 | 	if (!(priv->flags_supported & FLAG_LID)) | 
 | 		return sysfs_emit(buf, "unknown\n"); | 
 | 	if (priv->flags_state & FLAG_LID) | 
 | 		return sysfs_emit(buf, "open\n"); | 
 | 	else | 
 | 		return sysfs_emit(buf, "closed\n"); | 
 | } | 
 |  | 
 | static ssize_t dock_show(struct device *dev, struct device_attribute *attr, | 
 | 			 char *buf) | 
 | { | 
 | 	struct fujitsu_laptop *priv = dev_get_drvdata(dev); | 
 |  | 
 | 	if (!(priv->flags_supported & FLAG_DOCK)) | 
 | 		return sysfs_emit(buf, "unknown\n"); | 
 | 	if (priv->flags_state & FLAG_DOCK) | 
 | 		return sysfs_emit(buf, "docked\n"); | 
 | 	else | 
 | 		return sysfs_emit(buf, "undocked\n"); | 
 | } | 
 |  | 
 | static ssize_t radios_show(struct device *dev, struct device_attribute *attr, | 
 | 			   char *buf) | 
 | { | 
 | 	struct fujitsu_laptop *priv = dev_get_drvdata(dev); | 
 |  | 
 | 	if (!(priv->flags_supported & FLAG_RFKILL)) | 
 | 		return sysfs_emit(buf, "unknown\n"); | 
 | 	if (priv->flags_state & FLAG_RFKILL) | 
 | 		return sysfs_emit(buf, "on\n"); | 
 | 	else | 
 | 		return sysfs_emit(buf, "killed\n"); | 
 | } | 
 |  | 
 | static DEVICE_ATTR_RO(lid); | 
 | static DEVICE_ATTR_RO(dock); | 
 | static DEVICE_ATTR_RO(radios); | 
 |  | 
 | static struct attribute *fujitsu_pf_attributes[] = { | 
 | 	&dev_attr_lid.attr, | 
 | 	&dev_attr_dock.attr, | 
 | 	&dev_attr_radios.attr, | 
 | 	NULL | 
 | }; | 
 |  | 
 | static const struct attribute_group fujitsu_pf_attribute_group = { | 
 | 	.attrs = fujitsu_pf_attributes | 
 | }; | 
 |  | 
 | static struct platform_driver fujitsu_pf_driver = { | 
 | 	.driver = { | 
 | 		   .name = "fujitsu-laptop", | 
 | 		   } | 
 | }; | 
 |  | 
 | /* ACPI device for LCD brightness control */ | 
 |  | 
 | static const struct key_entry keymap_backlight[] = { | 
 | 	{ KE_KEY, true, { KEY_BRIGHTNESSUP } }, | 
 | 	{ KE_KEY, false, { KEY_BRIGHTNESSDOWN } }, | 
 | 	{ KE_END, 0 } | 
 | }; | 
 |  | 
 | static int acpi_fujitsu_bl_input_setup(struct acpi_device *device) | 
 | { | 
 | 	struct fujitsu_bl *priv = acpi_driver_data(device); | 
 | 	int ret; | 
 |  | 
 | 	priv->input = devm_input_allocate_device(&device->dev); | 
 | 	if (!priv->input) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	snprintf(priv->phys, sizeof(priv->phys), "%s/video/input0", | 
 | 		 acpi_device_hid(device)); | 
 |  | 
 | 	priv->input->name = acpi_device_name(device); | 
 | 	priv->input->phys = priv->phys; | 
 | 	priv->input->id.bustype = BUS_HOST; | 
 | 	priv->input->id.product = 0x06; | 
 |  | 
 | 	ret = sparse_keymap_setup(priv->input, keymap_backlight, NULL); | 
 | 	if (ret) | 
 | 		return ret; | 
 |  | 
 | 	return input_register_device(priv->input); | 
 | } | 
 |  | 
 | static int fujitsu_backlight_register(struct acpi_device *device) | 
 | { | 
 | 	struct fujitsu_bl *priv = acpi_driver_data(device); | 
 | 	const struct backlight_properties props = { | 
 | 		.brightness = priv->brightness_level, | 
 | 		.max_brightness = priv->max_brightness - 1, | 
 | 		.type = BACKLIGHT_PLATFORM | 
 | 	}; | 
 | 	struct backlight_device *bd; | 
 |  | 
 | 	bd = devm_backlight_device_register(&device->dev, "fujitsu-laptop", | 
 | 					    &device->dev, device, | 
 | 					    &fujitsu_bl_ops, &props); | 
 | 	if (IS_ERR(bd)) | 
 | 		return PTR_ERR(bd); | 
 |  | 
 | 	priv->bl_device = bd; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int acpi_fujitsu_bl_add(struct acpi_device *device) | 
 | { | 
 | 	struct fujitsu_bl *priv; | 
 | 	int ret; | 
 |  | 
 | 	if (acpi_video_get_backlight_type() != acpi_backlight_vendor) | 
 | 		return -ENODEV; | 
 |  | 
 | 	priv = devm_kzalloc(&device->dev, sizeof(*priv), GFP_KERNEL); | 
 | 	if (!priv) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	fujitsu_bl = priv; | 
 | 	strcpy(acpi_device_name(device), ACPI_FUJITSU_BL_DEVICE_NAME); | 
 | 	strcpy(acpi_device_class(device), ACPI_FUJITSU_CLASS); | 
 | 	device->driver_data = priv; | 
 |  | 
 | 	pr_info("ACPI: %s [%s]\n", | 
 | 		acpi_device_name(device), acpi_device_bid(device)); | 
 |  | 
 | 	if (get_max_brightness(device) <= 0) | 
 | 		priv->max_brightness = FUJITSU_LCD_N_LEVELS; | 
 | 	get_lcd_level(device); | 
 |  | 
 | 	ret = acpi_fujitsu_bl_input_setup(device); | 
 | 	if (ret) | 
 | 		return ret; | 
 |  | 
 | 	return fujitsu_backlight_register(device); | 
 | } | 
 |  | 
 | /* Brightness notify */ | 
 |  | 
 | static void acpi_fujitsu_bl_notify(struct acpi_device *device, u32 event) | 
 | { | 
 | 	struct fujitsu_bl *priv = acpi_driver_data(device); | 
 | 	int oldb, newb; | 
 |  | 
 | 	if (event != ACPI_FUJITSU_NOTIFY_CODE) { | 
 | 		acpi_handle_info(device->handle, "unsupported event [0x%x]\n", | 
 | 				 event); | 
 | 		sparse_keymap_report_event(priv->input, -1, 1, true); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	oldb = priv->brightness_level; | 
 | 	get_lcd_level(device); | 
 | 	newb = priv->brightness_level; | 
 |  | 
 | 	acpi_handle_debug(device->handle, | 
 | 			  "brightness button event [%i -> %i]\n", oldb, newb); | 
 |  | 
 | 	if (oldb == newb) | 
 | 		return; | 
 |  | 
 | 	if (!disable_brightness_adjust) | 
 | 		set_lcd_level(device, newb); | 
 |  | 
 | 	sparse_keymap_report_event(priv->input, oldb < newb, 1, true); | 
 | } | 
 |  | 
 | /* ACPI device for hotkey handling */ | 
 |  | 
 | static const struct key_entry keymap_default[] = { | 
 | 	{ KE_KEY, KEY1_CODE,            { KEY_PROG1 } }, | 
 | 	{ KE_KEY, KEY2_CODE,            { KEY_PROG2 } }, | 
 | 	{ KE_KEY, KEY3_CODE,            { KEY_PROG3 } }, | 
 | 	{ KE_KEY, KEY4_CODE,            { KEY_PROG4 } }, | 
 | 	{ KE_KEY, KEY5_CODE,            { KEY_RFKILL } }, | 
 | 	/* Soft keys read from status flags */ | 
 | 	{ KE_KEY, FLAG_RFKILL,          { KEY_RFKILL } }, | 
 | 	{ KE_KEY, FLAG_TOUCHPAD_TOGGLE, { KEY_TOUCHPAD_TOGGLE } }, | 
 | 	{ KE_KEY, FLAG_MICMUTE,         { KEY_MICMUTE } }, | 
 | 	{ KE_END, 0 } | 
 | }; | 
 |  | 
 | static const struct key_entry keymap_s64x0[] = { | 
 | 	{ KE_KEY, KEY1_CODE, { KEY_SCREENLOCK } },	/* "Lock" */ | 
 | 	{ KE_KEY, KEY2_CODE, { KEY_HELP } },		/* "Mobility Center */ | 
 | 	{ KE_KEY, KEY3_CODE, { KEY_PROG3 } }, | 
 | 	{ KE_KEY, KEY4_CODE, { KEY_PROG4 } }, | 
 | 	{ KE_END, 0 } | 
 | }; | 
 |  | 
 | static const struct key_entry keymap_p8010[] = { | 
 | 	{ KE_KEY, KEY1_CODE, { KEY_HELP } },		/* "Support" */ | 
 | 	{ KE_KEY, KEY2_CODE, { KEY_PROG2 } }, | 
 | 	{ KE_KEY, KEY3_CODE, { KEY_SWITCHVIDEOMODE } },	/* "Presentation" */ | 
 | 	{ KE_KEY, KEY4_CODE, { KEY_WWW } },		/* "WWW" */ | 
 | 	{ KE_END, 0 } | 
 | }; | 
 |  | 
 | static const struct key_entry *keymap = keymap_default; | 
 |  | 
 | static int fujitsu_laptop_dmi_keymap_override(const struct dmi_system_id *id) | 
 | { | 
 | 	pr_info("Identified laptop model '%s'\n", id->ident); | 
 | 	keymap = id->driver_data; | 
 | 	return 1; | 
 | } | 
 |  | 
 | static const struct dmi_system_id fujitsu_laptop_dmi_table[] = { | 
 | 	{ | 
 | 		.callback = fujitsu_laptop_dmi_keymap_override, | 
 | 		.ident = "Fujitsu Siemens S6410", | 
 | 		.matches = { | 
 | 			DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"), | 
 | 			DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK S6410"), | 
 | 		}, | 
 | 		.driver_data = (void *)keymap_s64x0 | 
 | 	}, | 
 | 	{ | 
 | 		.callback = fujitsu_laptop_dmi_keymap_override, | 
 | 		.ident = "Fujitsu Siemens S6420", | 
 | 		.matches = { | 
 | 			DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"), | 
 | 			DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK S6420"), | 
 | 		}, | 
 | 		.driver_data = (void *)keymap_s64x0 | 
 | 	}, | 
 | 	{ | 
 | 		.callback = fujitsu_laptop_dmi_keymap_override, | 
 | 		.ident = "Fujitsu LifeBook P8010", | 
 | 		.matches = { | 
 | 			DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"), | 
 | 			DMI_MATCH(DMI_PRODUCT_NAME, "LifeBook P8010"), | 
 | 		}, | 
 | 		.driver_data = (void *)keymap_p8010 | 
 | 	}, | 
 | 	{} | 
 | }; | 
 |  | 
 | static int acpi_fujitsu_laptop_input_setup(struct acpi_device *device) | 
 | { | 
 | 	struct fujitsu_laptop *priv = acpi_driver_data(device); | 
 | 	int ret; | 
 |  | 
 | 	priv->input = devm_input_allocate_device(&device->dev); | 
 | 	if (!priv->input) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	snprintf(priv->phys, sizeof(priv->phys), "%s/input0", | 
 | 		 acpi_device_hid(device)); | 
 |  | 
 | 	priv->input->name = acpi_device_name(device); | 
 | 	priv->input->phys = priv->phys; | 
 | 	priv->input->id.bustype = BUS_HOST; | 
 |  | 
 | 	dmi_check_system(fujitsu_laptop_dmi_table); | 
 | 	ret = sparse_keymap_setup(priv->input, keymap, NULL); | 
 | 	if (ret) | 
 | 		return ret; | 
 |  | 
 | 	return input_register_device(priv->input); | 
 | } | 
 |  | 
 | static int fujitsu_laptop_platform_add(struct acpi_device *device) | 
 | { | 
 | 	struct fujitsu_laptop *priv = acpi_driver_data(device); | 
 | 	int ret; | 
 |  | 
 | 	priv->pf_device = platform_device_alloc("fujitsu-laptop", PLATFORM_DEVID_NONE); | 
 | 	if (!priv->pf_device) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	platform_set_drvdata(priv->pf_device, priv); | 
 |  | 
 | 	ret = platform_device_add(priv->pf_device); | 
 | 	if (ret) | 
 | 		goto err_put_platform_device; | 
 |  | 
 | 	ret = sysfs_create_group(&priv->pf_device->dev.kobj, | 
 | 				 &fujitsu_pf_attribute_group); | 
 | 	if (ret) | 
 | 		goto err_del_platform_device; | 
 |  | 
 | 	return 0; | 
 |  | 
 | err_del_platform_device: | 
 | 	platform_device_del(priv->pf_device); | 
 | err_put_platform_device: | 
 | 	platform_device_put(priv->pf_device); | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | static void fujitsu_laptop_platform_remove(struct acpi_device *device) | 
 | { | 
 | 	struct fujitsu_laptop *priv = acpi_driver_data(device); | 
 |  | 
 | 	sysfs_remove_group(&priv->pf_device->dev.kobj, | 
 | 			   &fujitsu_pf_attribute_group); | 
 | 	platform_device_unregister(priv->pf_device); | 
 | } | 
 |  | 
 | static int logolamp_set(struct led_classdev *cdev, | 
 | 			enum led_brightness brightness) | 
 | { | 
 | 	struct acpi_device *device = to_acpi_device(cdev->dev->parent); | 
 | 	int poweron = FUNC_LED_ON, always = FUNC_LED_ON; | 
 | 	int ret; | 
 |  | 
 | 	if (brightness < LED_HALF) | 
 | 		poweron = FUNC_LED_OFF; | 
 |  | 
 | 	if (brightness < LED_FULL) | 
 | 		always = FUNC_LED_OFF; | 
 |  | 
 | 	ret = call_fext_func(device, FUNC_LEDS, 0x1, LOGOLAMP_POWERON, poweron); | 
 | 	if (ret < 0) | 
 | 		return ret; | 
 |  | 
 | 	return call_fext_func(device, FUNC_LEDS, 0x1, LOGOLAMP_ALWAYS, always); | 
 | } | 
 |  | 
 | static enum led_brightness logolamp_get(struct led_classdev *cdev) | 
 | { | 
 | 	struct acpi_device *device = to_acpi_device(cdev->dev->parent); | 
 | 	int ret; | 
 |  | 
 | 	ret = call_fext_func(device, FUNC_LEDS, 0x2, LOGOLAMP_ALWAYS, 0x0); | 
 | 	if (ret == FUNC_LED_ON) | 
 | 		return LED_FULL; | 
 |  | 
 | 	ret = call_fext_func(device, FUNC_LEDS, 0x2, LOGOLAMP_POWERON, 0x0); | 
 | 	if (ret == FUNC_LED_ON) | 
 | 		return LED_HALF; | 
 |  | 
 | 	return LED_OFF; | 
 | } | 
 |  | 
 | static int kblamps_set(struct led_classdev *cdev, | 
 | 		       enum led_brightness brightness) | 
 | { | 
 | 	struct acpi_device *device = to_acpi_device(cdev->dev->parent); | 
 |  | 
 | 	if (brightness >= LED_FULL) | 
 | 		return call_fext_func(device, FUNC_LEDS, 0x1, KEYBOARD_LAMPS, | 
 | 				      FUNC_LED_ON); | 
 | 	else | 
 | 		return call_fext_func(device, FUNC_LEDS, 0x1, KEYBOARD_LAMPS, | 
 | 				      FUNC_LED_OFF); | 
 | } | 
 |  | 
 | static enum led_brightness kblamps_get(struct led_classdev *cdev) | 
 | { | 
 | 	struct acpi_device *device = to_acpi_device(cdev->dev->parent); | 
 | 	enum led_brightness brightness = LED_OFF; | 
 |  | 
 | 	if (call_fext_func(device, | 
 | 			   FUNC_LEDS, 0x2, KEYBOARD_LAMPS, 0x0) == FUNC_LED_ON) | 
 | 		brightness = LED_FULL; | 
 |  | 
 | 	return brightness; | 
 | } | 
 |  | 
 | static int radio_led_set(struct led_classdev *cdev, | 
 | 			 enum led_brightness brightness) | 
 | { | 
 | 	struct acpi_device *device = to_acpi_device(cdev->dev->parent); | 
 |  | 
 | 	if (brightness >= LED_FULL) | 
 | 		return call_fext_func(device, FUNC_FLAGS, 0x5, RADIO_LED_ON, | 
 | 				      RADIO_LED_ON); | 
 | 	else | 
 | 		return call_fext_func(device, FUNC_FLAGS, 0x5, RADIO_LED_ON, | 
 | 				      0x0); | 
 | } | 
 |  | 
 | static enum led_brightness radio_led_get(struct led_classdev *cdev) | 
 | { | 
 | 	struct acpi_device *device = to_acpi_device(cdev->dev->parent); | 
 | 	enum led_brightness brightness = LED_OFF; | 
 |  | 
 | 	if (call_fext_func(device, FUNC_FLAGS, 0x4, 0x0, 0x0) & RADIO_LED_ON) | 
 | 		brightness = LED_FULL; | 
 |  | 
 | 	return brightness; | 
 | } | 
 |  | 
 | static int eco_led_set(struct led_classdev *cdev, | 
 | 		       enum led_brightness brightness) | 
 | { | 
 | 	struct acpi_device *device = to_acpi_device(cdev->dev->parent); | 
 | 	int curr; | 
 |  | 
 | 	curr = call_fext_func(device, FUNC_LEDS, 0x2, ECO_LED, 0x0); | 
 | 	if (brightness >= LED_FULL) | 
 | 		return call_fext_func(device, FUNC_LEDS, 0x1, ECO_LED, | 
 | 				      curr | ECO_LED_ON); | 
 | 	else | 
 | 		return call_fext_func(device, FUNC_LEDS, 0x1, ECO_LED, | 
 | 				      curr & ~ECO_LED_ON); | 
 | } | 
 |  | 
 | static enum led_brightness eco_led_get(struct led_classdev *cdev) | 
 | { | 
 | 	struct acpi_device *device = to_acpi_device(cdev->dev->parent); | 
 | 	enum led_brightness brightness = LED_OFF; | 
 |  | 
 | 	if (call_fext_func(device, FUNC_LEDS, 0x2, ECO_LED, 0x0) & ECO_LED_ON) | 
 | 		brightness = LED_FULL; | 
 |  | 
 | 	return brightness; | 
 | } | 
 |  | 
 | static int acpi_fujitsu_laptop_leds_register(struct acpi_device *device) | 
 | { | 
 | 	struct fujitsu_laptop *priv = acpi_driver_data(device); | 
 | 	struct led_classdev *led; | 
 | 	int ret; | 
 |  | 
 | 	if (call_fext_func(device, | 
 | 			   FUNC_LEDS, 0x0, 0x0, 0x0) & LOGOLAMP_POWERON) { | 
 | 		led = devm_kzalloc(&device->dev, sizeof(*led), GFP_KERNEL); | 
 | 		if (!led) | 
 | 			return -ENOMEM; | 
 |  | 
 | 		led->name = "fujitsu::logolamp"; | 
 | 		led->brightness_set_blocking = logolamp_set; | 
 | 		led->brightness_get = logolamp_get; | 
 | 		ret = devm_led_classdev_register(&device->dev, led); | 
 | 		if (ret) | 
 | 			return ret; | 
 | 	} | 
 |  | 
 | 	if ((call_fext_func(device, | 
 | 			    FUNC_LEDS, 0x0, 0x0, 0x0) & KEYBOARD_LAMPS) && | 
 | 	    (call_fext_func(device, FUNC_BUTTONS, 0x0, 0x0, 0x0) == 0x0)) { | 
 | 		led = devm_kzalloc(&device->dev, sizeof(*led), GFP_KERNEL); | 
 | 		if (!led) | 
 | 			return -ENOMEM; | 
 |  | 
 | 		led->name = "fujitsu::kblamps"; | 
 | 		led->brightness_set_blocking = kblamps_set; | 
 | 		led->brightness_get = kblamps_get; | 
 | 		ret = devm_led_classdev_register(&device->dev, led); | 
 | 		if (ret) | 
 | 			return ret; | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * Some Fujitsu laptops have a radio toggle button in place of a slide | 
 | 	 * switch and all such machines appear to also have an RF LED.  Based on | 
 | 	 * comparing DSDT tables of four Fujitsu Lifebook models (E744, E751, | 
 | 	 * S7110, S8420; the first one has a radio toggle button, the other | 
 | 	 * three have slide switches), bit 17 of flags_supported (the value | 
 | 	 * returned by method S000 of ACPI device FUJ02E3) seems to indicate | 
 | 	 * whether given model has a radio toggle button. | 
 | 	 */ | 
 | 	if (priv->flags_supported & BIT(17)) { | 
 | 		led = devm_kzalloc(&device->dev, sizeof(*led), GFP_KERNEL); | 
 | 		if (!led) | 
 | 			return -ENOMEM; | 
 |  | 
 | 		led->name = "fujitsu::radio_led"; | 
 | 		led->brightness_set_blocking = radio_led_set; | 
 | 		led->brightness_get = radio_led_get; | 
 | 		led->default_trigger = "rfkill-any"; | 
 | 		ret = devm_led_classdev_register(&device->dev, led); | 
 | 		if (ret) | 
 | 			return ret; | 
 | 	} | 
 |  | 
 | 	/* Support for eco led is not always signaled in bit corresponding | 
 | 	 * to the bit used to control the led. According to the DSDT table, | 
 | 	 * bit 14 seems to indicate presence of said led as well. | 
 | 	 * Confirm by testing the status. | 
 | 	 */ | 
 | 	if ((call_fext_func(device, FUNC_LEDS, 0x0, 0x0, 0x0) & BIT(14)) && | 
 | 	    (call_fext_func(device, | 
 | 			    FUNC_LEDS, 0x2, ECO_LED, 0x0) != UNSUPPORTED_CMD)) { | 
 | 		led = devm_kzalloc(&device->dev, sizeof(*led), GFP_KERNEL); | 
 | 		if (!led) | 
 | 			return -ENOMEM; | 
 |  | 
 | 		led->name = "fujitsu::eco_led"; | 
 | 		led->brightness_set_blocking = eco_led_set; | 
 | 		led->brightness_get = eco_led_get; | 
 | 		ret = devm_led_classdev_register(&device->dev, led); | 
 | 		if (ret) | 
 | 			return ret; | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int acpi_fujitsu_laptop_add(struct acpi_device *device) | 
 | { | 
 | 	struct fujitsu_laptop *priv; | 
 | 	int ret, i = 0; | 
 |  | 
 | 	priv = devm_kzalloc(&device->dev, sizeof(*priv), GFP_KERNEL); | 
 | 	if (!priv) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	WARN_ONCE(fext, "More than one FUJ02E3 ACPI device was found.  Driver may not work as intended."); | 
 | 	fext = device; | 
 |  | 
 | 	strcpy(acpi_device_name(device), ACPI_FUJITSU_LAPTOP_DEVICE_NAME); | 
 | 	strcpy(acpi_device_class(device), ACPI_FUJITSU_CLASS); | 
 | 	device->driver_data = priv; | 
 |  | 
 | 	/* kfifo */ | 
 | 	spin_lock_init(&priv->fifo_lock); | 
 | 	ret = kfifo_alloc(&priv->fifo, RINGBUFFERSIZE * sizeof(int), | 
 | 			  GFP_KERNEL); | 
 | 	if (ret) | 
 | 		return ret; | 
 |  | 
 | 	pr_info("ACPI: %s [%s]\n", | 
 | 		acpi_device_name(device), acpi_device_bid(device)); | 
 |  | 
 | 	while (call_fext_func(device, FUNC_BUTTONS, 0x1, 0x0, 0x0) != 0 && | 
 | 	       i++ < MAX_HOTKEY_RINGBUFFER_SIZE) | 
 | 		; /* No action, result is discarded */ | 
 | 	acpi_handle_debug(device->handle, "Discarded %i ringbuffer entries\n", | 
 | 			  i); | 
 |  | 
 | 	priv->flags_supported = call_fext_func(device, FUNC_FLAGS, 0x0, 0x0, | 
 | 					       0x0); | 
 |  | 
 | 	/* Make sure our bitmask of supported functions is cleared if the | 
 | 	   RFKILL function block is not implemented, like on the S7020. */ | 
 | 	if (priv->flags_supported == UNSUPPORTED_CMD) | 
 | 		priv->flags_supported = 0; | 
 |  | 
 | 	if (priv->flags_supported) | 
 | 		priv->flags_state = call_fext_func(device, FUNC_FLAGS, 0x4, 0x0, | 
 | 						   0x0); | 
 |  | 
 | 	/* Suspect this is a keymap of the application panel, print it */ | 
 | 	acpi_handle_info(device->handle, "BTNI: [0x%x]\n", | 
 | 			 call_fext_func(device, FUNC_BUTTONS, 0x0, 0x0, 0x0)); | 
 |  | 
 | 	/* Sync backlight power status */ | 
 | 	if (fujitsu_bl && fujitsu_bl->bl_device && | 
 | 	    acpi_video_get_backlight_type() == acpi_backlight_vendor) { | 
 | 		if (call_fext_func(fext, FUNC_BACKLIGHT, 0x2, | 
 | 				   BACKLIGHT_PARAM_POWER, 0x0) == BACKLIGHT_OFF) | 
 | 			fujitsu_bl->bl_device->props.power = BACKLIGHT_POWER_OFF; | 
 | 		else | 
 | 			fujitsu_bl->bl_device->props.power = BACKLIGHT_POWER_ON; | 
 | 	} | 
 |  | 
 | 	ret = acpi_fujitsu_laptop_input_setup(device); | 
 | 	if (ret) | 
 | 		goto err_free_fifo; | 
 |  | 
 | 	ret = acpi_fujitsu_laptop_leds_register(device); | 
 | 	if (ret) | 
 | 		goto err_free_fifo; | 
 |  | 
 | 	ret = fujitsu_laptop_platform_add(device); | 
 | 	if (ret) | 
 | 		goto err_free_fifo; | 
 |  | 
 | 	ret = fujitsu_battery_charge_control_add(device); | 
 | 	if (ret < 0) | 
 | 		pr_warn("Unable to register battery charge control: %d\n", ret); | 
 |  | 
 | 	return 0; | 
 |  | 
 | err_free_fifo: | 
 | 	kfifo_free(&priv->fifo); | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | static void acpi_fujitsu_laptop_remove(struct acpi_device *device) | 
 | { | 
 | 	struct fujitsu_laptop *priv = acpi_driver_data(device); | 
 |  | 
 | 	fujitsu_battery_charge_control_remove(device); | 
 |  | 
 | 	fujitsu_laptop_platform_remove(device); | 
 |  | 
 | 	kfifo_free(&priv->fifo); | 
 | } | 
 |  | 
 | static void acpi_fujitsu_laptop_press(struct acpi_device *device, int scancode) | 
 | { | 
 | 	struct fujitsu_laptop *priv = acpi_driver_data(device); | 
 | 	int ret; | 
 |  | 
 | 	ret = kfifo_in_locked(&priv->fifo, (unsigned char *)&scancode, | 
 | 			      sizeof(scancode), &priv->fifo_lock); | 
 | 	if (ret != sizeof(scancode)) { | 
 | 		dev_info(&priv->input->dev, "Could not push scancode [0x%x]\n", | 
 | 			 scancode); | 
 | 		return; | 
 | 	} | 
 | 	sparse_keymap_report_event(priv->input, scancode, 1, false); | 
 | 	dev_dbg(&priv->input->dev, "Push scancode into ringbuffer [0x%x]\n", | 
 | 		scancode); | 
 | } | 
 |  | 
 | static void acpi_fujitsu_laptop_release(struct acpi_device *device) | 
 | { | 
 | 	struct fujitsu_laptop *priv = acpi_driver_data(device); | 
 | 	int scancode, ret; | 
 |  | 
 | 	while (true) { | 
 | 		ret = kfifo_out_locked(&priv->fifo, (unsigned char *)&scancode, | 
 | 				       sizeof(scancode), &priv->fifo_lock); | 
 | 		if (ret != sizeof(scancode)) | 
 | 			return; | 
 | 		sparse_keymap_report_event(priv->input, scancode, 0, false); | 
 | 		dev_dbg(&priv->input->dev, | 
 | 			"Pop scancode from ringbuffer [0x%x]\n", scancode); | 
 | 	} | 
 | } | 
 |  | 
 | static void acpi_fujitsu_laptop_notify(struct acpi_device *device, u32 event) | 
 | { | 
 | 	struct fujitsu_laptop *priv = acpi_driver_data(device); | 
 | 	unsigned long flags; | 
 | 	int scancode, i = 0; | 
 | 	unsigned int irb; | 
 |  | 
 | 	if (event != ACPI_FUJITSU_NOTIFY_CODE) { | 
 | 		acpi_handle_info(device->handle, "Unsupported event [0x%x]\n", | 
 | 				 event); | 
 | 		sparse_keymap_report_event(priv->input, -1, 1, true); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	if (priv->flags_supported) | 
 | 		priv->flags_state = call_fext_func(device, FUNC_FLAGS, 0x4, 0x0, | 
 | 						   0x0); | 
 |  | 
 | 	while ((irb = call_fext_func(device, | 
 | 				     FUNC_BUTTONS, 0x1, 0x0, 0x0)) != 0 && | 
 | 	       i++ < MAX_HOTKEY_RINGBUFFER_SIZE) { | 
 | 		scancode = irb & 0x4ff; | 
 | 		if (sparse_keymap_entry_from_scancode(priv->input, scancode)) | 
 | 			acpi_fujitsu_laptop_press(device, scancode); | 
 | 		else if (scancode == 0) | 
 | 			acpi_fujitsu_laptop_release(device); | 
 | 		else | 
 | 			acpi_handle_info(device->handle, | 
 | 					 "Unknown GIRB result [%x]\n", irb); | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * First seen on the Skylake-based Lifebook E736/E746/E756), the | 
 | 	 * touchpad toggle hotkey (Fn+F4) is handled in software. Other models | 
 | 	 * have since added additional "soft keys". These are reported in the | 
 | 	 * status flags queried using FUNC_FLAGS. | 
 | 	 */ | 
 | 	if (priv->flags_supported & (FLAG_SOFTKEYS)) { | 
 | 		flags = call_fext_func(device, FUNC_FLAGS, 0x1, 0x0, 0x0); | 
 | 		flags &= (FLAG_SOFTKEYS); | 
 | 		for_each_set_bit(i, &flags, BITS_PER_LONG) | 
 | 			sparse_keymap_report_event(priv->input, BIT(i), 1, true); | 
 | 	} | 
 | } | 
 |  | 
 | /* Initialization */ | 
 |  | 
 | static const struct acpi_device_id fujitsu_bl_device_ids[] = { | 
 | 	{ACPI_FUJITSU_BL_HID, 0}, | 
 | 	{"", 0}, | 
 | }; | 
 |  | 
 | static struct acpi_driver acpi_fujitsu_bl_driver = { | 
 | 	.name = ACPI_FUJITSU_BL_DRIVER_NAME, | 
 | 	.class = ACPI_FUJITSU_CLASS, | 
 | 	.ids = fujitsu_bl_device_ids, | 
 | 	.ops = { | 
 | 		.add = acpi_fujitsu_bl_add, | 
 | 		.notify = acpi_fujitsu_bl_notify, | 
 | 		}, | 
 | }; | 
 |  | 
 | static const struct acpi_device_id fujitsu_laptop_device_ids[] = { | 
 | 	{ACPI_FUJITSU_LAPTOP_HID, 0}, | 
 | 	{"", 0}, | 
 | }; | 
 |  | 
 | static struct acpi_driver acpi_fujitsu_laptop_driver = { | 
 | 	.name = ACPI_FUJITSU_LAPTOP_DRIVER_NAME, | 
 | 	.class = ACPI_FUJITSU_CLASS, | 
 | 	.ids = fujitsu_laptop_device_ids, | 
 | 	.ops = { | 
 | 		.add = acpi_fujitsu_laptop_add, | 
 | 		.remove = acpi_fujitsu_laptop_remove, | 
 | 		.notify = acpi_fujitsu_laptop_notify, | 
 | 		}, | 
 | }; | 
 |  | 
 | static const struct acpi_device_id fujitsu_ids[] __used = { | 
 | 	{ACPI_FUJITSU_BL_HID, 0}, | 
 | 	{ACPI_FUJITSU_LAPTOP_HID, 0}, | 
 | 	{"", 0} | 
 | }; | 
 | MODULE_DEVICE_TABLE(acpi, fujitsu_ids); | 
 |  | 
 | static int __init fujitsu_init(void) | 
 | { | 
 | 	int ret; | 
 |  | 
 | 	ret = acpi_bus_register_driver(&acpi_fujitsu_bl_driver); | 
 | 	if (ret) | 
 | 		return ret; | 
 |  | 
 | 	/* Register platform stuff */ | 
 |  | 
 | 	ret = platform_driver_register(&fujitsu_pf_driver); | 
 | 	if (ret) | 
 | 		goto err_unregister_acpi; | 
 |  | 
 | 	/* Register laptop driver */ | 
 |  | 
 | 	ret = acpi_bus_register_driver(&acpi_fujitsu_laptop_driver); | 
 | 	if (ret) | 
 | 		goto err_unregister_platform_driver; | 
 |  | 
 | 	pr_info("driver " FUJITSU_DRIVER_VERSION " successfully loaded\n"); | 
 |  | 
 | 	return 0; | 
 |  | 
 | err_unregister_platform_driver: | 
 | 	platform_driver_unregister(&fujitsu_pf_driver); | 
 | err_unregister_acpi: | 
 | 	acpi_bus_unregister_driver(&acpi_fujitsu_bl_driver); | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | static void __exit fujitsu_cleanup(void) | 
 | { | 
 | 	acpi_bus_unregister_driver(&acpi_fujitsu_laptop_driver); | 
 |  | 
 | 	platform_driver_unregister(&fujitsu_pf_driver); | 
 |  | 
 | 	acpi_bus_unregister_driver(&acpi_fujitsu_bl_driver); | 
 |  | 
 | 	pr_info("driver unloaded\n"); | 
 | } | 
 |  | 
 | module_init(fujitsu_init); | 
 | module_exit(fujitsu_cleanup); | 
 |  | 
 | module_param(use_alt_lcd_levels, int, 0644); | 
 | MODULE_PARM_DESC(use_alt_lcd_levels, "Interface used for setting LCD brightness level (-1 = auto, 0 = force SBLL, 1 = force SBL2)"); | 
 | module_param(disable_brightness_adjust, bool, 0644); | 
 | MODULE_PARM_DESC(disable_brightness_adjust, "Disable LCD brightness adjustment"); | 
 |  | 
 | MODULE_AUTHOR("Jonathan Woithe, Peter Gruber, Tony Vroon"); | 
 | MODULE_DESCRIPTION("Fujitsu laptop extras support"); | 
 | MODULE_VERSION(FUJITSU_DRIVER_VERSION); | 
 | MODULE_LICENSE("GPL"); |