| /******************************************************************* | 
 |  * This file is part of the Emulex Linux Device Driver for         * | 
 |  * Fibre Channel Host Bus Adapters.                                * | 
 |  * Copyright (C) 2017-2024 Broadcom. All Rights Reserved. The term * | 
 |  * “Broadcom” refers to Broadcom Inc. and/or its subsidiaries.     * | 
 |  * Copyright (C) 2004-2016 Emulex.  All rights reserved.           * | 
 |  * EMULEX and SLI are trademarks of Emulex.                        * | 
 |  * www.broadcom.com                                                * | 
 |  * Portions Copyright (C) 2004-2005 Christoph Hellwig              * | 
 |  *                                                                 * | 
 |  * This program is free software; you can redistribute it and/or   * | 
 |  * modify it under the terms of version 2 of the GNU General       * | 
 |  * Public License as published by the Free Software Foundation.    * | 
 |  * This program is distributed in the hope that it will be useful. * | 
 |  * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND          * | 
 |  * WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY,  * | 
 |  * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE      * | 
 |  * DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD * | 
 |  * TO BE LEGALLY INVALID.  See the GNU General Public License for  * | 
 |  * more details, a copy of which can be found in the file COPYING  * | 
 |  * included with this package.                                     * | 
 |  *******************************************************************/ | 
 |  | 
 | #include <linux/blkdev.h> | 
 | #include <linux/delay.h> | 
 | #include <linux/slab.h> | 
 | #include <linux/pci.h> | 
 | #include <linux/kthread.h> | 
 | #include <linux/interrupt.h> | 
 | #include <linux/lockdep.h> | 
 | #include <linux/utsname.h> | 
 |  | 
 | #include <scsi/scsi.h> | 
 | #include <scsi/scsi_device.h> | 
 | #include <scsi/scsi_host.h> | 
 | #include <scsi/scsi_transport_fc.h> | 
 | #include <scsi/fc/fc_fs.h> | 
 |  | 
 | #include "lpfc_hw4.h" | 
 | #include "lpfc_hw.h" | 
 | #include "lpfc_nl.h" | 
 | #include "lpfc_disc.h" | 
 | #include "lpfc_sli.h" | 
 | #include "lpfc_sli4.h" | 
 | #include "lpfc.h" | 
 | #include "lpfc_scsi.h" | 
 | #include "lpfc_nvme.h" | 
 | #include "lpfc_logmsg.h" | 
 | #include "lpfc_crtn.h" | 
 | #include "lpfc_vport.h" | 
 | #include "lpfc_debugfs.h" | 
 |  | 
 | /* AlpaArray for assignment of scsid for scan-down and bind_method */ | 
 | static uint8_t lpfcAlpaArray[] = { | 
 | 	0xEF, 0xE8, 0xE4, 0xE2, 0xE1, 0xE0, 0xDC, 0xDA, 0xD9, 0xD6, | 
 | 	0xD5, 0xD4, 0xD3, 0xD2, 0xD1, 0xCE, 0xCD, 0xCC, 0xCB, 0xCA, | 
 | 	0xC9, 0xC7, 0xC6, 0xC5, 0xC3, 0xBC, 0xBA, 0xB9, 0xB6, 0xB5, | 
 | 	0xB4, 0xB3, 0xB2, 0xB1, 0xAE, 0xAD, 0xAC, 0xAB, 0xAA, 0xA9, | 
 | 	0xA7, 0xA6, 0xA5, 0xA3, 0x9F, 0x9E, 0x9D, 0x9B, 0x98, 0x97, | 
 | 	0x90, 0x8F, 0x88, 0x84, 0x82, 0x81, 0x80, 0x7C, 0x7A, 0x79, | 
 | 	0x76, 0x75, 0x74, 0x73, 0x72, 0x71, 0x6E, 0x6D, 0x6C, 0x6B, | 
 | 	0x6A, 0x69, 0x67, 0x66, 0x65, 0x63, 0x5C, 0x5A, 0x59, 0x56, | 
 | 	0x55, 0x54, 0x53, 0x52, 0x51, 0x4E, 0x4D, 0x4C, 0x4B, 0x4A, | 
 | 	0x49, 0x47, 0x46, 0x45, 0x43, 0x3C, 0x3A, 0x39, 0x36, 0x35, | 
 | 	0x34, 0x33, 0x32, 0x31, 0x2E, 0x2D, 0x2C, 0x2B, 0x2A, 0x29, | 
 | 	0x27, 0x26, 0x25, 0x23, 0x1F, 0x1E, 0x1D, 0x1B, 0x18, 0x17, | 
 | 	0x10, 0x0F, 0x08, 0x04, 0x02, 0x01 | 
 | }; | 
 |  | 
 | static void lpfc_disc_timeout_handler(struct lpfc_vport *); | 
 | static void lpfc_disc_flush_list(struct lpfc_vport *vport); | 
 | static void lpfc_unregister_fcfi_cmpl(struct lpfc_hba *, LPFC_MBOXQ_t *); | 
 | static int lpfc_fcf_inuse(struct lpfc_hba *); | 
 | static void lpfc_mbx_cmpl_read_sparam(struct lpfc_hba *, LPFC_MBOXQ_t *); | 
 | static void lpfc_check_inactive_vmid(struct lpfc_hba *phba); | 
 | static void lpfc_check_vmid_qfpa_issue(struct lpfc_hba *phba); | 
 |  | 
 | static int | 
 | lpfc_valid_xpt_node(struct lpfc_nodelist *ndlp) | 
 | { | 
 | 	if (ndlp->nlp_fc4_type || | 
 | 	    ndlp->nlp_type & NLP_FABRIC) | 
 | 		return 1; | 
 | 	return 0; | 
 | } | 
 | /* The source of a terminate rport I/O is either a dev_loss_tmo | 
 |  * event or a call to fc_remove_host.  While the rport should be | 
 |  * valid during these downcalls, the transport can call twice | 
 |  * in a single event.  This routine provides somoe protection | 
 |  * as the NDLP isn't really free, just released to the pool. | 
 |  */ | 
 | static int | 
 | lpfc_rport_invalid(struct fc_rport *rport) | 
 | { | 
 | 	struct lpfc_rport_data *rdata; | 
 | 	struct lpfc_nodelist *ndlp; | 
 |  | 
 | 	if (!rport) { | 
 | 		pr_err("**** %s: NULL rport, exit.\n", __func__); | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	rdata = rport->dd_data; | 
 | 	if (!rdata) { | 
 | 		pr_err("**** %s: NULL dd_data on rport x%px SID x%x\n", | 
 | 		       __func__, rport, rport->scsi_target_id); | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	ndlp = rdata->pnode; | 
 | 	if (!rdata->pnode) { | 
 | 		pr_info("**** %s: NULL ndlp on rport x%px SID x%x\n", | 
 | 			__func__, rport, rport->scsi_target_id); | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	if (!ndlp->vport) { | 
 | 		pr_err("**** %s: Null vport on ndlp x%px, DID x%x rport x%px " | 
 | 		       "SID x%x\n", __func__, ndlp, ndlp->nlp_DID, rport, | 
 | 		       rport->scsi_target_id); | 
 | 		return -EINVAL; | 
 | 	} | 
 | 	return 0; | 
 | } | 
 |  | 
 | void | 
 | lpfc_terminate_rport_io(struct fc_rport *rport) | 
 | { | 
 | 	struct lpfc_rport_data *rdata; | 
 | 	struct lpfc_nodelist *ndlp; | 
 | 	struct lpfc_vport *vport; | 
 |  | 
 | 	if (lpfc_rport_invalid(rport)) | 
 | 		return; | 
 |  | 
 | 	rdata = rport->dd_data; | 
 | 	ndlp = rdata->pnode; | 
 | 	vport = ndlp->vport; | 
 | 	lpfc_debugfs_disc_trc(vport, LPFC_DISC_TRC_RPORT, | 
 | 			      "rport terminate: sid:x%x did:x%x flg:x%x", | 
 | 			      ndlp->nlp_sid, ndlp->nlp_DID, ndlp->nlp_flag); | 
 |  | 
 | 	if (ndlp->nlp_sid != NLP_NO_SID) | 
 | 		lpfc_sli_abort_iocb(vport, ndlp->nlp_sid, 0, LPFC_CTX_TGT); | 
 | } | 
 |  | 
 | /* | 
 |  * This function will be called when dev_loss_tmo fire. | 
 |  */ | 
 | void | 
 | lpfc_dev_loss_tmo_callbk(struct fc_rport *rport) | 
 | { | 
 | 	struct lpfc_nodelist *ndlp; | 
 | 	struct lpfc_vport *vport; | 
 | 	struct lpfc_hba   *phba; | 
 | 	struct lpfc_work_evt *evtp; | 
 | 	unsigned long iflags; | 
 |  | 
 | 	ndlp = ((struct lpfc_rport_data *)rport->dd_data)->pnode; | 
 | 	if (!ndlp) | 
 | 		return; | 
 |  | 
 | 	vport = ndlp->vport; | 
 | 	phba  = vport->phba; | 
 |  | 
 | 	lpfc_debugfs_disc_trc(vport, LPFC_DISC_TRC_RPORT, | 
 | 		"rport devlosscb: sid:x%x did:x%x flg:x%x", | 
 | 		ndlp->nlp_sid, ndlp->nlp_DID, ndlp->nlp_flag); | 
 |  | 
 | 	lpfc_printf_vlog(ndlp->vport, KERN_INFO, LOG_NODE, | 
 | 			 "3181 dev_loss_callbk x%06x, rport x%px flg x%x " | 
 | 			 "load_flag x%lx refcnt %u state %d xpt x%x\n", | 
 | 			 ndlp->nlp_DID, ndlp->rport, ndlp->nlp_flag, | 
 | 			 vport->load_flag, kref_read(&ndlp->kref), | 
 | 			 ndlp->nlp_state, ndlp->fc4_xpt_flags); | 
 |  | 
 | 	/* Don't schedule a worker thread event if the vport is going down. */ | 
 | 	if (test_bit(FC_UNLOADING, &vport->load_flag) || | 
 | 	    !test_bit(HBA_SETUP, &phba->hba_flag)) { | 
 | 		spin_lock_irqsave(&ndlp->lock, iflags); | 
 | 		ndlp->rport = NULL; | 
 |  | 
 | 		/* The scsi_transport is done with the rport so lpfc cannot | 
 | 		 * call to unregister. Remove the scsi transport reference | 
 | 		 * and clean up the SCSI transport node details. | 
 | 		 */ | 
 | 		if (ndlp->fc4_xpt_flags & (NLP_XPT_REGD | SCSI_XPT_REGD)) { | 
 | 			ndlp->fc4_xpt_flags &= ~SCSI_XPT_REGD; | 
 |  | 
 | 			/* NVME transport-registered rports need the | 
 | 			 * NLP_XPT_REGD flag to complete an unregister. | 
 | 			 */ | 
 | 			if (!(ndlp->fc4_xpt_flags & NVME_XPT_REGD)) | 
 | 				ndlp->fc4_xpt_flags &= ~NLP_XPT_REGD; | 
 | 			spin_unlock_irqrestore(&ndlp->lock, iflags); | 
 | 			lpfc_nlp_put(ndlp); | 
 | 			spin_lock_irqsave(&ndlp->lock, iflags); | 
 | 		} | 
 |  | 
 | 		/* Only 1 thread can drop the initial node reference.  If | 
 | 		 * another thread has set NLP_DROPPED, this thread is done. | 
 | 		 */ | 
 | 		if (!(ndlp->fc4_xpt_flags & NVME_XPT_REGD) && | 
 | 		    !(ndlp->nlp_flag & NLP_DROPPED)) { | 
 | 			ndlp->nlp_flag |= NLP_DROPPED; | 
 | 			spin_unlock_irqrestore(&ndlp->lock, iflags); | 
 | 			lpfc_nlp_put(ndlp); | 
 | 			return; | 
 | 		} | 
 |  | 
 | 		spin_unlock_irqrestore(&ndlp->lock, iflags); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	if (ndlp->nlp_state == NLP_STE_MAPPED_NODE) | 
 | 		return; | 
 |  | 
 | 	/* check for recovered fabric node */ | 
 | 	if (ndlp->nlp_state == NLP_STE_UNMAPPED_NODE && | 
 | 	    ndlp->nlp_DID == Fabric_DID) | 
 | 		return; | 
 |  | 
 | 	if (rport->port_name != wwn_to_u64(ndlp->nlp_portname.u.wwn)) | 
 | 		lpfc_printf_vlog(vport, KERN_ERR, LOG_TRACE_EVENT, | 
 | 				 "6789 rport name %llx != node port name %llx", | 
 | 				 rport->port_name, | 
 | 				 wwn_to_u64(ndlp->nlp_portname.u.wwn)); | 
 |  | 
 | 	evtp = &ndlp->dev_loss_evt; | 
 |  | 
 | 	if (!list_empty(&evtp->evt_listp)) { | 
 | 		lpfc_printf_vlog(vport, KERN_ERR, LOG_TRACE_EVENT, | 
 | 				 "6790 rport name %llx dev_loss_evt pending\n", | 
 | 				 rport->port_name); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	spin_lock_irqsave(&ndlp->lock, iflags); | 
 | 	ndlp->nlp_flag |= NLP_IN_DEV_LOSS; | 
 |  | 
 | 	/* If there is a PLOGI in progress, and we are in a | 
 | 	 * NLP_NPR_2B_DISC state, don't turn off the flag. | 
 | 	 */ | 
 | 	if (ndlp->nlp_state != NLP_STE_PLOGI_ISSUE) | 
 | 		ndlp->nlp_flag &= ~NLP_NPR_2B_DISC; | 
 |  | 
 | 	/* | 
 | 	 * The backend does not expect any more calls associated with this | 
 | 	 * rport. Remove the association between rport and ndlp. | 
 | 	 */ | 
 | 	ndlp->fc4_xpt_flags &= ~SCSI_XPT_REGD; | 
 | 	((struct lpfc_rport_data *)rport->dd_data)->pnode = NULL; | 
 | 	ndlp->rport = NULL; | 
 | 	spin_unlock_irqrestore(&ndlp->lock, iflags); | 
 |  | 
 | 	if (phba->worker_thread) { | 
 | 		/* We need to hold the node by incrementing the reference | 
 | 		 * count until this queued work is done | 
 | 		 */ | 
 | 		evtp->evt_arg1 = lpfc_nlp_get(ndlp); | 
 |  | 
 | 		spin_lock_irqsave(&phba->hbalock, iflags); | 
 | 		if (evtp->evt_arg1) { | 
 | 			evtp->evt = LPFC_EVT_DEV_LOSS; | 
 | 			list_add_tail(&evtp->evt_listp, &phba->work_list); | 
 | 			spin_unlock_irqrestore(&phba->hbalock, iflags); | 
 | 			lpfc_worker_wake_up(phba); | 
 | 			return; | 
 | 		} | 
 | 		spin_unlock_irqrestore(&phba->hbalock, iflags); | 
 | 	} else { | 
 | 		lpfc_printf_vlog(ndlp->vport, KERN_INFO, LOG_NODE, | 
 | 				 "3188 worker thread is stopped %s x%06x, " | 
 | 				 " rport x%px flg x%x load_flag x%lx refcnt " | 
 | 				 "%d\n", __func__, ndlp->nlp_DID, | 
 | 				 ndlp->rport, ndlp->nlp_flag, | 
 | 				 vport->load_flag, kref_read(&ndlp->kref)); | 
 | 		if (!(ndlp->fc4_xpt_flags & NVME_XPT_REGD)) { | 
 | 			spin_lock_irqsave(&ndlp->lock, iflags); | 
 | 			/* Node is in dev loss.  No further transaction. */ | 
 | 			ndlp->nlp_flag &= ~NLP_IN_DEV_LOSS; | 
 | 			spin_unlock_irqrestore(&ndlp->lock, iflags); | 
 | 			lpfc_disc_state_machine(vport, ndlp, NULL, | 
 | 						NLP_EVT_DEVICE_RM); | 
 | 		} | 
 | 	} | 
 | } | 
 |  | 
 | /** | 
 |  * lpfc_check_inactive_vmid_one - VMID inactivity checker for a vport | 
 |  * @vport: Pointer to vport context object. | 
 |  * | 
 |  * This function checks for idle VMID entries related to a particular vport. If | 
 |  * found unused/idle, free them accordingly. | 
 |  **/ | 
 | static void lpfc_check_inactive_vmid_one(struct lpfc_vport *vport) | 
 | { | 
 | 	u16 keep; | 
 | 	u32 difftime = 0, r, bucket; | 
 | 	u64 *lta; | 
 | 	int cpu; | 
 | 	struct lpfc_vmid *vmp; | 
 |  | 
 | 	write_lock(&vport->vmid_lock); | 
 |  | 
 | 	if (!vport->cur_vmid_cnt) | 
 | 		goto out; | 
 |  | 
 | 	/* iterate through the table */ | 
 | 	hash_for_each(vport->hash_table, bucket, vmp, hnode) { | 
 | 		keep = 0; | 
 | 		if (vmp->flag & LPFC_VMID_REGISTERED) { | 
 | 			/* check if the particular VMID is in use */ | 
 | 			/* for all available per cpu variable */ | 
 | 			for_each_possible_cpu(cpu) { | 
 | 				/* if last access time is less than timeout */ | 
 | 				lta = per_cpu_ptr(vmp->last_io_time, cpu); | 
 | 				if (!lta) | 
 | 					continue; | 
 | 				difftime = (jiffies) - (*lta); | 
 | 				if ((vport->vmid_inactivity_timeout * | 
 | 				     JIFFIES_PER_HR) > difftime) { | 
 | 					keep = 1; | 
 | 					break; | 
 | 				} | 
 | 			} | 
 |  | 
 | 			/* if none of the cpus have been used by the vm, */ | 
 | 			/*  remove the entry if already registered */ | 
 | 			if (!keep) { | 
 | 				/* mark the entry for deregistration */ | 
 | 				vmp->flag = LPFC_VMID_DE_REGISTER; | 
 | 				write_unlock(&vport->vmid_lock); | 
 | 				if (vport->vmid_priority_tagging) | 
 | 					r = lpfc_vmid_uvem(vport, vmp, false); | 
 | 				else | 
 | 					r = lpfc_vmid_cmd(vport, | 
 | 							  SLI_CTAS_DAPP_IDENT, | 
 | 							  vmp); | 
 |  | 
 | 				/* decrement number of active vms and mark */ | 
 | 				/* entry in slot as free */ | 
 | 				write_lock(&vport->vmid_lock); | 
 | 				if (!r) { | 
 | 					struct lpfc_vmid *ht = vmp; | 
 |  | 
 | 					vport->cur_vmid_cnt--; | 
 | 					ht->flag = LPFC_VMID_SLOT_FREE; | 
 | 					free_percpu(ht->last_io_time); | 
 | 					ht->last_io_time = NULL; | 
 | 					hash_del(&ht->hnode); | 
 | 				} | 
 | 			} | 
 | 		} | 
 | 	} | 
 |  out: | 
 | 	write_unlock(&vport->vmid_lock); | 
 | } | 
 |  | 
 | /** | 
 |  * lpfc_check_inactive_vmid - VMID inactivity checker | 
 |  * @phba: Pointer to hba context object. | 
 |  * | 
 |  * This function is called from the worker thread to determine if an entry in | 
 |  * the VMID table can be released since there was no I/O activity seen from that | 
 |  * particular VM for the specified time. When this happens, the entry in the | 
 |  * table is released and also the resources on the switch cleared. | 
 |  **/ | 
 |  | 
 | static void lpfc_check_inactive_vmid(struct lpfc_hba *phba) | 
 | { | 
 | 	struct lpfc_vport *vport; | 
 | 	struct lpfc_vport **vports; | 
 | 	int i; | 
 |  | 
 | 	vports = lpfc_create_vport_work_array(phba); | 
 | 	if (!vports) | 
 | 		return; | 
 |  | 
 | 	for (i = 0; i <= phba->max_vports; i++) { | 
 | 		if ((!vports[i]) && (i == 0)) | 
 | 			vport = phba->pport; | 
 | 		else | 
 | 			vport = vports[i]; | 
 | 		if (!vport) | 
 | 			break; | 
 |  | 
 | 		lpfc_check_inactive_vmid_one(vport); | 
 | 	} | 
 | 	lpfc_destroy_vport_work_array(phba, vports); | 
 | } | 
 |  | 
 | /** | 
 |  * lpfc_check_nlp_post_devloss - Check to restore ndlp refcnt after devloss | 
 |  * @vport: Pointer to vport object. | 
 |  * @ndlp: Pointer to remote node object. | 
 |  * | 
 |  * If NLP_IN_RECOV_POST_DEV_LOSS flag was set due to outstanding recovery of | 
 |  * node during dev_loss_tmo processing, then this function restores the nlp_put | 
 |  * kref decrement from lpfc_dev_loss_tmo_handler. | 
 |  **/ | 
 | void | 
 | lpfc_check_nlp_post_devloss(struct lpfc_vport *vport, | 
 | 			    struct lpfc_nodelist *ndlp) | 
 | { | 
 | 	unsigned long iflags; | 
 |  | 
 | 	spin_lock_irqsave(&ndlp->lock, iflags); | 
 | 	if (ndlp->save_flags & NLP_IN_RECOV_POST_DEV_LOSS) { | 
 | 		ndlp->save_flags &= ~NLP_IN_RECOV_POST_DEV_LOSS; | 
 | 		spin_unlock_irqrestore(&ndlp->lock, iflags); | 
 | 		lpfc_nlp_get(ndlp); | 
 | 		lpfc_printf_vlog(vport, KERN_INFO, LOG_DISCOVERY | LOG_NODE, | 
 | 				 "8438 Devloss timeout reversed on DID x%x " | 
 | 				 "refcnt %d ndlp %p flag x%x " | 
 | 				 "port_state = x%x\n", | 
 | 				 ndlp->nlp_DID, kref_read(&ndlp->kref), ndlp, | 
 | 				 ndlp->nlp_flag, vport->port_state); | 
 | 		return; | 
 | 	} | 
 | 	spin_unlock_irqrestore(&ndlp->lock, iflags); | 
 | } | 
 |  | 
 | /** | 
 |  * lpfc_dev_loss_tmo_handler - Remote node devloss timeout handler | 
 |  * @ndlp: Pointer to remote node object. | 
 |  * | 
 |  * This function is called from the worker thread when devloss timeout timer | 
 |  * expires. For SLI4 host, this routine shall return 1 when at lease one | 
 |  * remote node, including this @ndlp, is still in use of FCF; otherwise, this | 
 |  * routine shall return 0 when there is no remote node is still in use of FCF | 
 |  * when devloss timeout happened to this @ndlp. | 
 |  **/ | 
 | static int | 
 | lpfc_dev_loss_tmo_handler(struct lpfc_nodelist *ndlp) | 
 | { | 
 | 	struct lpfc_vport *vport; | 
 | 	struct lpfc_hba   *phba; | 
 | 	uint8_t *name; | 
 | 	int warn_on = 0; | 
 | 	int fcf_inuse = 0; | 
 | 	bool recovering = false; | 
 | 	struct fc_vport *fc_vport = NULL; | 
 | 	unsigned long iflags; | 
 |  | 
 | 	vport = ndlp->vport; | 
 | 	name = (uint8_t *)&ndlp->nlp_portname; | 
 | 	phba = vport->phba; | 
 |  | 
 | 	if (phba->sli_rev == LPFC_SLI_REV4) | 
 | 		fcf_inuse = lpfc_fcf_inuse(phba); | 
 |  | 
 | 	lpfc_debugfs_disc_trc(vport, LPFC_DISC_TRC_RPORT, | 
 | 			      "rport devlosstmo:did:x%x type:x%x id:x%x", | 
 | 			      ndlp->nlp_DID, ndlp->nlp_type, ndlp->nlp_sid); | 
 |  | 
 | 	lpfc_printf_vlog(ndlp->vport, KERN_INFO, LOG_NODE, | 
 | 			 "3182 %s x%06x, nflag x%x xflags x%x refcnt %d\n", | 
 | 			 __func__, ndlp->nlp_DID, ndlp->nlp_flag, | 
 | 			 ndlp->fc4_xpt_flags, kref_read(&ndlp->kref)); | 
 |  | 
 | 	/* If the driver is recovering the rport, ignore devloss. */ | 
 | 	if (ndlp->nlp_state == NLP_STE_MAPPED_NODE) { | 
 | 		lpfc_printf_vlog(vport, KERN_INFO, LOG_DISCOVERY, | 
 | 				 "0284 Devloss timeout Ignored on " | 
 | 				 "WWPN %x:%x:%x:%x:%x:%x:%x:%x " | 
 | 				 "NPort x%x\n", | 
 | 				 *name, *(name+1), *(name+2), *(name+3), | 
 | 				 *(name+4), *(name+5), *(name+6), *(name+7), | 
 | 				 ndlp->nlp_DID); | 
 |  | 
 | 		spin_lock_irqsave(&ndlp->lock, iflags); | 
 | 		ndlp->nlp_flag &= ~NLP_IN_DEV_LOSS; | 
 | 		spin_unlock_irqrestore(&ndlp->lock, iflags); | 
 | 		return fcf_inuse; | 
 | 	} | 
 |  | 
 | 	/* Fabric nodes are done. */ | 
 | 	if (ndlp->nlp_type & NLP_FABRIC) { | 
 | 		spin_lock_irqsave(&ndlp->lock, iflags); | 
 |  | 
 | 		/* The driver has to account for a race between any fabric | 
 | 		 * node that's in recovery when dev_loss_tmo expires. When this | 
 | 		 * happens, the driver has to allow node recovery. | 
 | 		 */ | 
 | 		switch (ndlp->nlp_DID) { | 
 | 		case Fabric_DID: | 
 | 			fc_vport = vport->fc_vport; | 
 | 			if (fc_vport) { | 
 | 				/* NPIV path. */ | 
 | 				if (fc_vport->vport_state == | 
 | 				    FC_VPORT_INITIALIZING) | 
 | 					recovering = true; | 
 | 			} else { | 
 | 				/* Physical port path. */ | 
 | 				if (test_bit(HBA_FLOGI_OUTSTANDING, | 
 | 					     &phba->hba_flag)) | 
 | 					recovering = true; | 
 | 			} | 
 | 			break; | 
 | 		case Fabric_Cntl_DID: | 
 | 			if (ndlp->nlp_flag & NLP_REG_LOGIN_SEND) | 
 | 				recovering = true; | 
 | 			break; | 
 | 		case FDMI_DID: | 
 | 			fallthrough; | 
 | 		case NameServer_DID: | 
 | 			if (ndlp->nlp_state >= NLP_STE_PLOGI_ISSUE && | 
 | 			    ndlp->nlp_state <= NLP_STE_REG_LOGIN_ISSUE) | 
 | 				recovering = true; | 
 | 			break; | 
 | 		default: | 
 | 			/* Ensure the nlp_DID at least has the correct prefix. | 
 | 			 * The fabric domain controller's last three nibbles | 
 | 			 * vary so we handle it in the default case. | 
 | 			 */ | 
 | 			if (ndlp->nlp_DID & Fabric_DID_MASK) { | 
 | 				if (ndlp->nlp_state >= NLP_STE_PLOGI_ISSUE && | 
 | 				    ndlp->nlp_state <= NLP_STE_REG_LOGIN_ISSUE) | 
 | 					recovering = true; | 
 | 			} | 
 | 			break; | 
 | 		} | 
 | 		spin_unlock_irqrestore(&ndlp->lock, iflags); | 
 |  | 
 | 		/* Mark an NLP_IN_RECOV_POST_DEV_LOSS flag to know if reversing | 
 | 		 * the following lpfc_nlp_put is necessary after fabric node is | 
 | 		 * recovered. | 
 | 		 */ | 
 | 		spin_lock_irqsave(&ndlp->lock, iflags); | 
 | 		ndlp->nlp_flag &= ~NLP_IN_DEV_LOSS; | 
 | 		spin_unlock_irqrestore(&ndlp->lock, iflags); | 
 | 		if (recovering) { | 
 | 			lpfc_printf_vlog(vport, KERN_INFO, | 
 | 					 LOG_DISCOVERY | LOG_NODE, | 
 | 					 "8436 Devloss timeout marked on " | 
 | 					 "DID x%x refcnt %d ndlp %p " | 
 | 					 "flag x%x port_state = x%x\n", | 
 | 					 ndlp->nlp_DID, kref_read(&ndlp->kref), | 
 | 					 ndlp, ndlp->nlp_flag, | 
 | 					 vport->port_state); | 
 | 			spin_lock_irqsave(&ndlp->lock, iflags); | 
 | 			ndlp->save_flags |= NLP_IN_RECOV_POST_DEV_LOSS; | 
 | 			spin_unlock_irqrestore(&ndlp->lock, iflags); | 
 | 			return fcf_inuse; | 
 | 		} else if (ndlp->nlp_state == NLP_STE_UNMAPPED_NODE) { | 
 | 			/* Fabric node fully recovered before this dev_loss_tmo | 
 | 			 * queue work is processed.  Thus, ignore the | 
 | 			 * dev_loss_tmo event. | 
 | 			 */ | 
 | 			lpfc_printf_vlog(vport, KERN_INFO, | 
 | 					 LOG_DISCOVERY | LOG_NODE, | 
 | 					 "8437 Devloss timeout ignored on " | 
 | 					 "DID x%x refcnt %d ndlp %p " | 
 | 					 "flag x%x port_state = x%x\n", | 
 | 					 ndlp->nlp_DID, kref_read(&ndlp->kref), | 
 | 					 ndlp, ndlp->nlp_flag, | 
 | 					 vport->port_state); | 
 | 			return fcf_inuse; | 
 | 		} | 
 |  | 
 | 		lpfc_nlp_put(ndlp); | 
 | 		return fcf_inuse; | 
 | 	} | 
 |  | 
 | 	if (ndlp->nlp_sid != NLP_NO_SID) { | 
 | 		warn_on = 1; | 
 | 		lpfc_sli_abort_iocb(vport, ndlp->nlp_sid, 0, LPFC_CTX_TGT); | 
 | 	} | 
 |  | 
 | 	if (warn_on) { | 
 | 		lpfc_printf_vlog(vport, KERN_ERR, LOG_TRACE_EVENT, | 
 | 				 "0203 Devloss timeout on " | 
 | 				 "WWPN %02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x " | 
 | 				 "NPort x%06x Data: x%x x%x x%x refcnt %d\n", | 
 | 				 *name, *(name+1), *(name+2), *(name+3), | 
 | 				 *(name+4), *(name+5), *(name+6), *(name+7), | 
 | 				 ndlp->nlp_DID, ndlp->nlp_flag, | 
 | 				 ndlp->nlp_state, ndlp->nlp_rpi, | 
 | 				 kref_read(&ndlp->kref)); | 
 | 	} else { | 
 | 		lpfc_printf_vlog(vport, KERN_INFO, LOG_TRACE_EVENT, | 
 | 				 "0204 Devloss timeout on " | 
 | 				 "WWPN %02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x " | 
 | 				 "NPort x%06x Data: x%x x%x x%x\n", | 
 | 				 *name, *(name+1), *(name+2), *(name+3), | 
 | 				 *(name+4), *(name+5), *(name+6), *(name+7), | 
 | 				 ndlp->nlp_DID, ndlp->nlp_flag, | 
 | 				 ndlp->nlp_state, ndlp->nlp_rpi); | 
 | 	} | 
 | 	spin_lock_irqsave(&ndlp->lock, iflags); | 
 | 	ndlp->nlp_flag &= ~NLP_IN_DEV_LOSS; | 
 | 	spin_unlock_irqrestore(&ndlp->lock, iflags); | 
 |  | 
 | 	/* If we are devloss, but we are in the process of rediscovering the | 
 | 	 * ndlp, don't issue a NLP_EVT_DEVICE_RM event. | 
 | 	 */ | 
 | 	if (ndlp->nlp_state >= NLP_STE_PLOGI_ISSUE && | 
 | 	    ndlp->nlp_state <= NLP_STE_PRLI_ISSUE) { | 
 | 		return fcf_inuse; | 
 | 	} | 
 |  | 
 | 	if (!(ndlp->fc4_xpt_flags & NVME_XPT_REGD)) | 
 | 		lpfc_disc_state_machine(vport, ndlp, NULL, NLP_EVT_DEVICE_RM); | 
 |  | 
 | 	return fcf_inuse; | 
 | } | 
 |  | 
 | static void lpfc_check_vmid_qfpa_issue(struct lpfc_hba *phba) | 
 | { | 
 | 	struct lpfc_vport *vport; | 
 | 	struct lpfc_vport **vports; | 
 | 	int i; | 
 |  | 
 | 	vports = lpfc_create_vport_work_array(phba); | 
 | 	if (!vports) | 
 | 		return; | 
 |  | 
 | 	for (i = 0; i <= phba->max_vports; i++) { | 
 | 		if ((!vports[i]) && (i == 0)) | 
 | 			vport = phba->pport; | 
 | 		else | 
 | 			vport = vports[i]; | 
 | 		if (!vport) | 
 | 			break; | 
 |  | 
 | 		if (vport->vmid_flag & LPFC_VMID_ISSUE_QFPA) { | 
 | 			if (!lpfc_issue_els_qfpa(vport)) | 
 | 				vport->vmid_flag &= ~LPFC_VMID_ISSUE_QFPA; | 
 | 		} | 
 | 	} | 
 | 	lpfc_destroy_vport_work_array(phba, vports); | 
 | } | 
 |  | 
 | /** | 
 |  * lpfc_sli4_post_dev_loss_tmo_handler - SLI4 post devloss timeout handler | 
 |  * @phba: Pointer to hba context object. | 
 |  * @fcf_inuse: SLI4 FCF in-use state reported from devloss timeout handler. | 
 |  * @nlp_did: remote node identifer with devloss timeout. | 
 |  * | 
 |  * This function is called from the worker thread after invoking devloss | 
 |  * timeout handler and releasing the reference count for the ndlp with | 
 |  * which the devloss timeout was handled for SLI4 host. For the devloss | 
 |  * timeout of the last remote node which had been in use of FCF, when this | 
 |  * routine is invoked, it shall be guaranteed that none of the remote are | 
 |  * in-use of FCF. When devloss timeout to the last remote using the FCF, | 
 |  * if the FIP engine is neither in FCF table scan process nor roundrobin | 
 |  * failover process, the in-use FCF shall be unregistered. If the FIP | 
 |  * engine is in FCF discovery process, the devloss timeout state shall | 
 |  * be set for either the FCF table scan process or roundrobin failover | 
 |  * process to unregister the in-use FCF. | 
 |  **/ | 
 | static void | 
 | lpfc_sli4_post_dev_loss_tmo_handler(struct lpfc_hba *phba, int fcf_inuse, | 
 | 				    uint32_t nlp_did) | 
 | { | 
 | 	/* If devloss timeout happened to a remote node when FCF had no | 
 | 	 * longer been in-use, do nothing. | 
 | 	 */ | 
 | 	if (!fcf_inuse) | 
 | 		return; | 
 |  | 
 | 	if (test_bit(HBA_FIP_SUPPORT, &phba->hba_flag) && | 
 | 	    !lpfc_fcf_inuse(phba)) { | 
 | 		spin_lock_irq(&phba->hbalock); | 
 | 		if (phba->fcf.fcf_flag & FCF_DISCOVERY) { | 
 | 			if (test_and_set_bit(HBA_DEVLOSS_TMO, | 
 | 					     &phba->hba_flag)) { | 
 | 				spin_unlock_irq(&phba->hbalock); | 
 | 				return; | 
 | 			} | 
 | 			lpfc_printf_log(phba, KERN_INFO, LOG_FIP, | 
 | 					"2847 Last remote node (x%x) using " | 
 | 					"FCF devloss tmo\n", nlp_did); | 
 | 		} | 
 | 		if (phba->fcf.fcf_flag & FCF_REDISC_PROG) { | 
 | 			spin_unlock_irq(&phba->hbalock); | 
 | 			lpfc_printf_log(phba, KERN_INFO, LOG_FIP, | 
 | 					"2868 Devloss tmo to FCF rediscovery " | 
 | 					"in progress\n"); | 
 | 			return; | 
 | 		} | 
 | 		spin_unlock_irq(&phba->hbalock); | 
 | 		if (!test_bit(FCF_TS_INPROG, &phba->hba_flag) && | 
 | 		    !test_bit(FCF_RR_INPROG, &phba->hba_flag)) { | 
 | 			lpfc_printf_log(phba, KERN_INFO, LOG_FIP, | 
 | 					"2869 Devloss tmo to idle FIP engine, " | 
 | 					"unreg in-use FCF and rescan.\n"); | 
 | 			/* Unregister in-use FCF and rescan */ | 
 | 			lpfc_unregister_fcf_rescan(phba); | 
 | 			return; | 
 | 		} | 
 | 		if (test_bit(FCF_TS_INPROG, &phba->hba_flag)) | 
 | 			lpfc_printf_log(phba, KERN_INFO, LOG_FIP, | 
 | 					"2870 FCF table scan in progress\n"); | 
 | 		if (test_bit(FCF_RR_INPROG, &phba->hba_flag)) | 
 | 			lpfc_printf_log(phba, KERN_INFO, LOG_FIP, | 
 | 					"2871 FLOGI roundrobin FCF failover " | 
 | 					"in progress\n"); | 
 | 	} | 
 | 	lpfc_unregister_unused_fcf(phba); | 
 | } | 
 |  | 
 | /** | 
 |  * lpfc_alloc_fast_evt - Allocates data structure for posting event | 
 |  * @phba: Pointer to hba context object. | 
 |  * | 
 |  * This function is called from the functions which need to post | 
 |  * events from interrupt context. This function allocates data | 
 |  * structure required for posting event. It also keeps track of | 
 |  * number of events pending and prevent event storm when there are | 
 |  * too many events. | 
 |  **/ | 
 | struct lpfc_fast_path_event * | 
 | lpfc_alloc_fast_evt(struct lpfc_hba *phba) { | 
 | 	struct lpfc_fast_path_event *ret; | 
 |  | 
 | 	/* If there are lot of fast event do not exhaust memory due to this */ | 
 | 	if (atomic_read(&phba->fast_event_count) > LPFC_MAX_EVT_COUNT) | 
 | 		return NULL; | 
 |  | 
 | 	ret = kzalloc(sizeof(struct lpfc_fast_path_event), | 
 | 			GFP_ATOMIC); | 
 | 	if (ret) { | 
 | 		atomic_inc(&phba->fast_event_count); | 
 | 		INIT_LIST_HEAD(&ret->work_evt.evt_listp); | 
 | 		ret->work_evt.evt = LPFC_EVT_FASTPATH_MGMT_EVT; | 
 | 	} | 
 | 	return ret; | 
 | } | 
 |  | 
 | /** | 
 |  * lpfc_free_fast_evt - Frees event data structure | 
 |  * @phba: Pointer to hba context object. | 
 |  * @evt:  Event object which need to be freed. | 
 |  * | 
 |  * This function frees the data structure required for posting | 
 |  * events. | 
 |  **/ | 
 | void | 
 | lpfc_free_fast_evt(struct lpfc_hba *phba, | 
 | 		struct lpfc_fast_path_event *evt) { | 
 |  | 
 | 	atomic_dec(&phba->fast_event_count); | 
 | 	kfree(evt); | 
 | } | 
 |  | 
 | /** | 
 |  * lpfc_send_fastpath_evt - Posts events generated from fast path | 
 |  * @phba: Pointer to hba context object. | 
 |  * @evtp: Event data structure. | 
 |  * | 
 |  * This function is called from worker thread, when the interrupt | 
 |  * context need to post an event. This function posts the event | 
 |  * to fc transport netlink interface. | 
 |  **/ | 
 | static void | 
 | lpfc_send_fastpath_evt(struct lpfc_hba *phba, | 
 | 		struct lpfc_work_evt *evtp) | 
 | { | 
 | 	unsigned long evt_category, evt_sub_category; | 
 | 	struct lpfc_fast_path_event *fast_evt_data; | 
 | 	char *evt_data; | 
 | 	uint32_t evt_data_size; | 
 | 	struct Scsi_Host *shost; | 
 |  | 
 | 	fast_evt_data = container_of(evtp, struct lpfc_fast_path_event, | 
 | 		work_evt); | 
 |  | 
 | 	evt_category = (unsigned long) fast_evt_data->un.fabric_evt.event_type; | 
 | 	evt_sub_category = (unsigned long) fast_evt_data->un. | 
 | 			fabric_evt.subcategory; | 
 | 	shost = lpfc_shost_from_vport(fast_evt_data->vport); | 
 | 	if (evt_category == FC_REG_FABRIC_EVENT) { | 
 | 		if (evt_sub_category == LPFC_EVENT_FCPRDCHKERR) { | 
 | 			evt_data = (char *) &fast_evt_data->un.read_check_error; | 
 | 			evt_data_size = sizeof(fast_evt_data->un. | 
 | 				read_check_error); | 
 | 		} else if ((evt_sub_category == LPFC_EVENT_FABRIC_BUSY) || | 
 | 			(evt_sub_category == LPFC_EVENT_PORT_BUSY)) { | 
 | 			evt_data = (char *) &fast_evt_data->un.fabric_evt; | 
 | 			evt_data_size = sizeof(fast_evt_data->un.fabric_evt); | 
 | 		} else { | 
 | 			lpfc_free_fast_evt(phba, fast_evt_data); | 
 | 			return; | 
 | 		} | 
 | 	} else if (evt_category == FC_REG_SCSI_EVENT) { | 
 | 		switch (evt_sub_category) { | 
 | 		case LPFC_EVENT_QFULL: | 
 | 		case LPFC_EVENT_DEVBSY: | 
 | 			evt_data = (char *) &fast_evt_data->un.scsi_evt; | 
 | 			evt_data_size = sizeof(fast_evt_data->un.scsi_evt); | 
 | 			break; | 
 | 		case LPFC_EVENT_CHECK_COND: | 
 | 			evt_data = (char *) &fast_evt_data->un.check_cond_evt; | 
 | 			evt_data_size =  sizeof(fast_evt_data->un. | 
 | 				check_cond_evt); | 
 | 			break; | 
 | 		case LPFC_EVENT_VARQUEDEPTH: | 
 | 			evt_data = (char *) &fast_evt_data->un.queue_depth_evt; | 
 | 			evt_data_size = sizeof(fast_evt_data->un. | 
 | 				queue_depth_evt); | 
 | 			break; | 
 | 		default: | 
 | 			lpfc_free_fast_evt(phba, fast_evt_data); | 
 | 			return; | 
 | 		} | 
 | 	} else { | 
 | 		lpfc_free_fast_evt(phba, fast_evt_data); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	if (phba->cfg_enable_fc4_type != LPFC_ENABLE_NVME) | 
 | 		fc_host_post_vendor_event(shost, | 
 | 			fc_get_event_number(), | 
 | 			evt_data_size, | 
 | 			evt_data, | 
 | 			LPFC_NL_VENDOR_ID); | 
 |  | 
 | 	lpfc_free_fast_evt(phba, fast_evt_data); | 
 | 	return; | 
 | } | 
 |  | 
 | static void | 
 | lpfc_work_list_done(struct lpfc_hba *phba) | 
 | { | 
 | 	struct lpfc_work_evt  *evtp = NULL; | 
 | 	struct lpfc_nodelist  *ndlp; | 
 | 	int free_evt; | 
 | 	int fcf_inuse; | 
 | 	uint32_t nlp_did; | 
 | 	bool hba_pci_err; | 
 |  | 
 | 	spin_lock_irq(&phba->hbalock); | 
 | 	while (!list_empty(&phba->work_list)) { | 
 | 		list_remove_head((&phba->work_list), evtp, typeof(*evtp), | 
 | 				 evt_listp); | 
 | 		spin_unlock_irq(&phba->hbalock); | 
 | 		hba_pci_err = test_bit(HBA_PCI_ERR, &phba->bit_flags); | 
 | 		free_evt = 1; | 
 | 		switch (evtp->evt) { | 
 | 		case LPFC_EVT_ELS_RETRY: | 
 | 			ndlp = (struct lpfc_nodelist *) (evtp->evt_arg1); | 
 | 			if (!hba_pci_err) { | 
 | 				lpfc_els_retry_delay_handler(ndlp); | 
 | 				free_evt = 0; /* evt is part of ndlp */ | 
 | 			} | 
 | 			/* decrement the node reference count held | 
 | 			 * for this queued work | 
 | 			 */ | 
 | 			lpfc_nlp_put(ndlp); | 
 | 			break; | 
 | 		case LPFC_EVT_DEV_LOSS: | 
 | 			ndlp = (struct lpfc_nodelist *)(evtp->evt_arg1); | 
 | 			fcf_inuse = lpfc_dev_loss_tmo_handler(ndlp); | 
 | 			free_evt = 0; | 
 | 			/* decrement the node reference count held for | 
 | 			 * this queued work | 
 | 			 */ | 
 | 			nlp_did = ndlp->nlp_DID; | 
 | 			lpfc_nlp_put(ndlp); | 
 | 			if (phba->sli_rev == LPFC_SLI_REV4) | 
 | 				lpfc_sli4_post_dev_loss_tmo_handler(phba, | 
 | 								    fcf_inuse, | 
 | 								    nlp_did); | 
 | 			break; | 
 | 		case LPFC_EVT_RECOVER_PORT: | 
 | 			ndlp = (struct lpfc_nodelist *)(evtp->evt_arg1); | 
 | 			if (!hba_pci_err) { | 
 | 				lpfc_sli_abts_recover_port(ndlp->vport, ndlp); | 
 | 				free_evt = 0; | 
 | 			} | 
 | 			/* decrement the node reference count held for | 
 | 			 * this queued work | 
 | 			 */ | 
 | 			lpfc_nlp_put(ndlp); | 
 | 			break; | 
 | 		case LPFC_EVT_ONLINE: | 
 | 			if (phba->link_state < LPFC_LINK_DOWN) | 
 | 				*(int *) (evtp->evt_arg1) = lpfc_online(phba); | 
 | 			else | 
 | 				*(int *) (evtp->evt_arg1) = 0; | 
 | 			complete((struct completion *)(evtp->evt_arg2)); | 
 | 			break; | 
 | 		case LPFC_EVT_OFFLINE_PREP: | 
 | 			if (phba->link_state >= LPFC_LINK_DOWN) | 
 | 				lpfc_offline_prep(phba, LPFC_MBX_WAIT); | 
 | 			*(int *)(evtp->evt_arg1) = 0; | 
 | 			complete((struct completion *)(evtp->evt_arg2)); | 
 | 			break; | 
 | 		case LPFC_EVT_OFFLINE: | 
 | 			lpfc_offline(phba); | 
 | 			lpfc_sli_brdrestart(phba); | 
 | 			*(int *)(evtp->evt_arg1) = | 
 | 				lpfc_sli_brdready(phba, HS_FFRDY | HS_MBRDY); | 
 | 			lpfc_unblock_mgmt_io(phba); | 
 | 			complete((struct completion *)(evtp->evt_arg2)); | 
 | 			break; | 
 | 		case LPFC_EVT_WARM_START: | 
 | 			lpfc_offline(phba); | 
 | 			lpfc_reset_barrier(phba); | 
 | 			lpfc_sli_brdreset(phba); | 
 | 			lpfc_hba_down_post(phba); | 
 | 			*(int *)(evtp->evt_arg1) = | 
 | 				lpfc_sli_brdready(phba, HS_MBRDY); | 
 | 			lpfc_unblock_mgmt_io(phba); | 
 | 			complete((struct completion *)(evtp->evt_arg2)); | 
 | 			break; | 
 | 		case LPFC_EVT_KILL: | 
 | 			lpfc_offline(phba); | 
 | 			*(int *)(evtp->evt_arg1) | 
 | 				= (phba->pport->stopped) | 
 | 				        ? 0 : lpfc_sli_brdkill(phba); | 
 | 			lpfc_unblock_mgmt_io(phba); | 
 | 			complete((struct completion *)(evtp->evt_arg2)); | 
 | 			break; | 
 | 		case LPFC_EVT_FASTPATH_MGMT_EVT: | 
 | 			lpfc_send_fastpath_evt(phba, evtp); | 
 | 			free_evt = 0; | 
 | 			break; | 
 | 		case LPFC_EVT_RESET_HBA: | 
 | 			if (!test_bit(FC_UNLOADING, &phba->pport->load_flag)) | 
 | 				lpfc_reset_hba(phba); | 
 | 			break; | 
 | 		} | 
 | 		if (free_evt) | 
 | 			kfree(evtp); | 
 | 		spin_lock_irq(&phba->hbalock); | 
 | 	} | 
 | 	spin_unlock_irq(&phba->hbalock); | 
 |  | 
 | } | 
 |  | 
 | static void | 
 | lpfc_work_done(struct lpfc_hba *phba) | 
 | { | 
 | 	struct lpfc_sli_ring *pring; | 
 | 	uint32_t ha_copy, status, control, work_port_events; | 
 | 	struct lpfc_vport **vports; | 
 | 	struct lpfc_vport *vport; | 
 | 	int i; | 
 | 	bool hba_pci_err; | 
 |  | 
 | 	hba_pci_err = test_bit(HBA_PCI_ERR, &phba->bit_flags); | 
 | 	spin_lock_irq(&phba->hbalock); | 
 | 	ha_copy = phba->work_ha; | 
 | 	phba->work_ha = 0; | 
 | 	spin_unlock_irq(&phba->hbalock); | 
 | 	if (hba_pci_err) | 
 | 		ha_copy = 0; | 
 |  | 
 | 	/* First, try to post the next mailbox command to SLI4 device */ | 
 | 	if (phba->pci_dev_grp == LPFC_PCI_DEV_OC && !hba_pci_err) | 
 | 		lpfc_sli4_post_async_mbox(phba); | 
 |  | 
 | 	if (ha_copy & HA_ERATT) { | 
 | 		/* Handle the error attention event */ | 
 | 		lpfc_handle_eratt(phba); | 
 |  | 
 | 		if (phba->fw_dump_cmpl) { | 
 | 			complete(phba->fw_dump_cmpl); | 
 | 			phba->fw_dump_cmpl = NULL; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	if (ha_copy & HA_MBATT) | 
 | 		lpfc_sli_handle_mb_event(phba); | 
 |  | 
 | 	if (ha_copy & HA_LATT) | 
 | 		lpfc_handle_latt(phba); | 
 |  | 
 | 	/* Handle VMID Events */ | 
 | 	if (lpfc_is_vmid_enabled(phba) && !hba_pci_err) { | 
 | 		if (phba->pport->work_port_events & | 
 | 		    WORKER_CHECK_VMID_ISSUE_QFPA) { | 
 | 			lpfc_check_vmid_qfpa_issue(phba); | 
 | 			phba->pport->work_port_events &= | 
 | 				~WORKER_CHECK_VMID_ISSUE_QFPA; | 
 | 		} | 
 | 		if (phba->pport->work_port_events & | 
 | 		    WORKER_CHECK_INACTIVE_VMID) { | 
 | 			lpfc_check_inactive_vmid(phba); | 
 | 			phba->pport->work_port_events &= | 
 | 			    ~WORKER_CHECK_INACTIVE_VMID; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	/* Process SLI4 events */ | 
 | 	if (phba->pci_dev_grp == LPFC_PCI_DEV_OC) { | 
 | 		if (test_bit(HBA_RRQ_ACTIVE, &phba->hba_flag)) | 
 | 			lpfc_handle_rrq_active(phba); | 
 | 		if (test_bit(ELS_XRI_ABORT_EVENT, &phba->hba_flag)) | 
 | 			lpfc_sli4_els_xri_abort_event_proc(phba); | 
 | 		if (test_bit(ASYNC_EVENT, &phba->hba_flag)) | 
 | 			lpfc_sli4_async_event_proc(phba); | 
 | 		if (test_and_clear_bit(HBA_POST_RECEIVE_BUFFER, | 
 | 				       &phba->hba_flag)) | 
 | 			lpfc_sli_hbqbuf_add_hbqs(phba, LPFC_ELS_HBQ); | 
 | 		if (phba->fcf.fcf_flag & FCF_REDISC_EVT) | 
 | 			lpfc_sli4_fcf_redisc_event_proc(phba); | 
 | 	} | 
 |  | 
 | 	vports = lpfc_create_vport_work_array(phba); | 
 | 	if (vports != NULL) | 
 | 		for (i = 0; i <= phba->max_vports; i++) { | 
 | 			/* | 
 | 			 * We could have no vports in array if unloading, so if | 
 | 			 * this happens then just use the pport | 
 | 			 */ | 
 | 			if (vports[i] == NULL && i == 0) | 
 | 				vport = phba->pport; | 
 | 			else | 
 | 				vport = vports[i]; | 
 | 			if (vport == NULL) | 
 | 				break; | 
 | 			spin_lock_irq(&vport->work_port_lock); | 
 | 			work_port_events = vport->work_port_events; | 
 | 			vport->work_port_events &= ~work_port_events; | 
 | 			spin_unlock_irq(&vport->work_port_lock); | 
 | 			if (hba_pci_err) | 
 | 				continue; | 
 | 			if (work_port_events & WORKER_DISC_TMO) | 
 | 				lpfc_disc_timeout_handler(vport); | 
 | 			if (work_port_events & WORKER_ELS_TMO) | 
 | 				lpfc_els_timeout_handler(vport); | 
 | 			if (work_port_events & WORKER_HB_TMO) | 
 | 				lpfc_hb_timeout_handler(phba); | 
 | 			if (work_port_events & WORKER_MBOX_TMO) | 
 | 				lpfc_mbox_timeout_handler(phba); | 
 | 			if (work_port_events & WORKER_FABRIC_BLOCK_TMO) | 
 | 				lpfc_unblock_fabric_iocbs(phba); | 
 | 			if (work_port_events & WORKER_RAMP_DOWN_QUEUE) | 
 | 				lpfc_ramp_down_queue_handler(phba); | 
 | 			if (work_port_events & WORKER_DELAYED_DISC_TMO) | 
 | 				lpfc_delayed_disc_timeout_handler(vport); | 
 | 		} | 
 | 	lpfc_destroy_vport_work_array(phba, vports); | 
 |  | 
 | 	pring = lpfc_phba_elsring(phba); | 
 | 	status = (ha_copy & (HA_RXMASK  << (4*LPFC_ELS_RING))); | 
 | 	status >>= (4*LPFC_ELS_RING); | 
 | 	if (pring && (status & HA_RXMASK || | 
 | 		      pring->flag & LPFC_DEFERRED_RING_EVENT || | 
 | 		      test_bit(HBA_SP_QUEUE_EVT, &phba->hba_flag))) { | 
 | 		if (pring->flag & LPFC_STOP_IOCB_EVENT) { | 
 | 			pring->flag |= LPFC_DEFERRED_RING_EVENT; | 
 | 			/* Preserve legacy behavior. */ | 
 | 			if (!test_bit(HBA_SP_QUEUE_EVT, &phba->hba_flag)) | 
 | 				set_bit(LPFC_DATA_READY, &phba->data_flags); | 
 | 		} else { | 
 | 			/* Driver could have abort request completed in queue | 
 | 			 * when link goes down.  Allow for this transition. | 
 | 			 */ | 
 | 			if (phba->link_state >= LPFC_LINK_DOWN || | 
 | 			    phba->link_flag & LS_MDS_LOOPBACK) { | 
 | 				pring->flag &= ~LPFC_DEFERRED_RING_EVENT; | 
 | 				lpfc_sli_handle_slow_ring_event(phba, pring, | 
 | 								(status & | 
 | 								HA_RXMASK)); | 
 | 			} | 
 | 		} | 
 | 		if (phba->sli_rev == LPFC_SLI_REV4) | 
 | 			lpfc_drain_txq(phba); | 
 | 		/* | 
 | 		 * Turn on Ring interrupts | 
 | 		 */ | 
 | 		if (phba->sli_rev <= LPFC_SLI_REV3) { | 
 | 			spin_lock_irq(&phba->hbalock); | 
 | 			control = readl(phba->HCregaddr); | 
 | 			if (!(control & (HC_R0INT_ENA << LPFC_ELS_RING))) { | 
 | 				lpfc_debugfs_slow_ring_trc(phba, | 
 | 					"WRK Enable ring: cntl:x%x hacopy:x%x", | 
 | 					control, ha_copy, 0); | 
 |  | 
 | 				control |= (HC_R0INT_ENA << LPFC_ELS_RING); | 
 | 				writel(control, phba->HCregaddr); | 
 | 				readl(phba->HCregaddr); /* flush */ | 
 | 			} else { | 
 | 				lpfc_debugfs_slow_ring_trc(phba, | 
 | 					"WRK Ring ok:     cntl:x%x hacopy:x%x", | 
 | 					control, ha_copy, 0); | 
 | 			} | 
 | 			spin_unlock_irq(&phba->hbalock); | 
 | 		} | 
 | 	} | 
 | 	lpfc_work_list_done(phba); | 
 | } | 
 |  | 
 | int | 
 | lpfc_do_work(void *p) | 
 | { | 
 | 	struct lpfc_hba *phba = p; | 
 | 	int rc; | 
 |  | 
 | 	set_user_nice(current, MIN_NICE); | 
 | 	current->flags |= PF_NOFREEZE; | 
 | 	phba->data_flags = 0; | 
 |  | 
 | 	while (!kthread_should_stop()) { | 
 | 		/* wait and check worker queue activities */ | 
 | 		rc = wait_event_interruptible(phba->work_waitq, | 
 | 					(test_and_clear_bit(LPFC_DATA_READY, | 
 | 							    &phba->data_flags) | 
 | 					 || kthread_should_stop())); | 
 | 		/* Signal wakeup shall terminate the worker thread */ | 
 | 		if (rc) { | 
 | 			lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, | 
 | 					"0433 Wakeup on signal: rc=x%x\n", rc); | 
 | 			break; | 
 | 		} | 
 |  | 
 | 		/* Attend pending lpfc data processing */ | 
 | 		lpfc_work_done(phba); | 
 | 	} | 
 | 	phba->worker_thread = NULL; | 
 | 	lpfc_printf_log(phba, KERN_INFO, LOG_ELS, | 
 | 			"0432 Worker thread stopped.\n"); | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* | 
 |  * This is only called to handle FC worker events. Since this a rare | 
 |  * occurrence, we allocate a struct lpfc_work_evt structure here instead of | 
 |  * embedding it in the IOCB. | 
 |  */ | 
 | int | 
 | lpfc_workq_post_event(struct lpfc_hba *phba, void *arg1, void *arg2, | 
 | 		      uint32_t evt) | 
 | { | 
 | 	struct lpfc_work_evt  *evtp; | 
 | 	unsigned long flags; | 
 |  | 
 | 	/* | 
 | 	 * All Mailbox completions and LPFC_ELS_RING rcv ring IOCB events will | 
 | 	 * be queued to worker thread for processing | 
 | 	 */ | 
 | 	evtp = kmalloc(sizeof(struct lpfc_work_evt), GFP_ATOMIC); | 
 | 	if (!evtp) | 
 | 		return 0; | 
 |  | 
 | 	evtp->evt_arg1  = arg1; | 
 | 	evtp->evt_arg2  = arg2; | 
 | 	evtp->evt       = evt; | 
 |  | 
 | 	spin_lock_irqsave(&phba->hbalock, flags); | 
 | 	list_add_tail(&evtp->evt_listp, &phba->work_list); | 
 | 	spin_unlock_irqrestore(&phba->hbalock, flags); | 
 |  | 
 | 	lpfc_worker_wake_up(phba); | 
 |  | 
 | 	return 1; | 
 | } | 
 |  | 
 | void | 
 | lpfc_cleanup_rpis(struct lpfc_vport *vport, int remove) | 
 | { | 
 | 	struct lpfc_hba  *phba = vport->phba; | 
 | 	struct lpfc_nodelist *ndlp, *next_ndlp; | 
 |  | 
 | 	list_for_each_entry_safe(ndlp, next_ndlp, &vport->fc_nodes, nlp_listp) { | 
 | 		if ((phba->sli3_options & LPFC_SLI3_VPORT_TEARDOWN) || | 
 | 		    ((vport->port_type == LPFC_NPIV_PORT) && | 
 | 		     ((ndlp->nlp_DID == NameServer_DID) || | 
 | 		      (ndlp->nlp_DID == FDMI_DID) || | 
 | 		      (ndlp->nlp_DID == Fabric_Cntl_DID)))) | 
 | 			lpfc_unreg_rpi(vport, ndlp); | 
 |  | 
 | 		/* Leave Fabric nodes alone on link down */ | 
 | 		if ((phba->sli_rev < LPFC_SLI_REV4) && | 
 | 		    (!remove && ndlp->nlp_type & NLP_FABRIC)) | 
 | 			continue; | 
 |  | 
 | 		/* Notify transport of connectivity loss to trigger cleanup. */ | 
 | 		if (phba->nvmet_support && | 
 | 		    ndlp->nlp_state == NLP_STE_UNMAPPED_NODE) | 
 | 			lpfc_nvmet_invalidate_host(phba, ndlp); | 
 |  | 
 | 		lpfc_disc_state_machine(vport, ndlp, NULL, | 
 | 					remove | 
 | 					? NLP_EVT_DEVICE_RM | 
 | 					: NLP_EVT_DEVICE_RECOVERY); | 
 | 	} | 
 | 	if (phba->sli3_options & LPFC_SLI3_VPORT_TEARDOWN) { | 
 | 		if (phba->sli_rev == LPFC_SLI_REV4) | 
 | 			lpfc_sli4_unreg_all_rpis(vport); | 
 | 		lpfc_mbx_unreg_vpi(vport); | 
 | 		set_bit(FC_VPORT_NEEDS_REG_VPI, &vport->fc_flag); | 
 | 	} | 
 | } | 
 |  | 
 | void | 
 | lpfc_port_link_failure(struct lpfc_vport *vport) | 
 | { | 
 | 	lpfc_vport_set_state(vport, FC_VPORT_LINKDOWN); | 
 |  | 
 | 	/* Cleanup any outstanding received buffers */ | 
 | 	lpfc_cleanup_rcv_buffers(vport); | 
 |  | 
 | 	/* Cleanup any outstanding RSCN activity */ | 
 | 	lpfc_els_flush_rscn(vport); | 
 |  | 
 | 	/* Cleanup any outstanding ELS commands */ | 
 | 	lpfc_els_flush_cmd(vport); | 
 |  | 
 | 	lpfc_cleanup_rpis(vport, 0); | 
 |  | 
 | 	/* Turn off discovery timer if its running */ | 
 | 	lpfc_can_disctmo(vport); | 
 | } | 
 |  | 
 | void | 
 | lpfc_linkdown_port(struct lpfc_vport *vport) | 
 | { | 
 | 	struct lpfc_hba *phba = vport->phba; | 
 | 	struct Scsi_Host *shost = lpfc_shost_from_vport(vport); | 
 |  | 
 | 	if (vport->cfg_enable_fc4_type != LPFC_ENABLE_NVME) | 
 | 		fc_host_post_event(shost, fc_get_event_number(), | 
 | 				   FCH_EVT_LINKDOWN, 0); | 
 |  | 
 | 	lpfc_debugfs_disc_trc(vport, LPFC_DISC_TRC_ELS_CMD, | 
 | 		"Link Down:       state:x%x rtry:x%x flg:x%x", | 
 | 		vport->port_state, vport->fc_ns_retry, vport->fc_flag); | 
 |  | 
 | 	lpfc_port_link_failure(vport); | 
 |  | 
 | 	/* Stop delayed Nport discovery */ | 
 | 	clear_bit(FC_DISC_DELAYED, &vport->fc_flag); | 
 | 	del_timer_sync(&vport->delayed_disc_tmo); | 
 |  | 
 | 	if (phba->sli_rev == LPFC_SLI_REV4 && | 
 | 	    vport->port_type == LPFC_PHYSICAL_PORT && | 
 | 	    phba->sli4_hba.fawwpn_flag & LPFC_FAWWPN_CONFIG) { | 
 | 		/* Assume success on link up */ | 
 | 		phba->sli4_hba.fawwpn_flag |= LPFC_FAWWPN_FABRIC; | 
 | 	} | 
 | } | 
 |  | 
 | int | 
 | lpfc_linkdown(struct lpfc_hba *phba) | 
 | { | 
 | 	struct lpfc_vport *vport = phba->pport; | 
 | 	struct Scsi_Host *shost = lpfc_shost_from_vport(vport); | 
 | 	struct lpfc_vport **vports; | 
 | 	LPFC_MBOXQ_t          *mb; | 
 | 	int i; | 
 | 	int offline; | 
 |  | 
 | 	if (phba->link_state == LPFC_LINK_DOWN) | 
 | 		return 0; | 
 |  | 
 | 	/* Block all SCSI stack I/Os */ | 
 | 	lpfc_scsi_dev_block(phba); | 
 | 	offline = pci_channel_offline(phba->pcidev); | 
 |  | 
 | 	/* Decrement the held ndlp if there is a deferred flogi acc */ | 
 | 	if (phba->defer_flogi_acc.flag) { | 
 | 		if (phba->defer_flogi_acc.ndlp) { | 
 | 			lpfc_nlp_put(phba->defer_flogi_acc.ndlp); | 
 | 			phba->defer_flogi_acc.ndlp = NULL; | 
 | 		} | 
 | 	} | 
 | 	phba->defer_flogi_acc.flag = false; | 
 |  | 
 | 	/* Clear external loopback plug detected flag */ | 
 | 	phba->link_flag &= ~LS_EXTERNAL_LOOPBACK; | 
 |  | 
 | 	spin_lock_irq(&phba->hbalock); | 
 | 	phba->fcf.fcf_flag &= ~(FCF_AVAILABLE | FCF_SCAN_DONE); | 
 | 	spin_unlock_irq(&phba->hbalock); | 
 | 	if (phba->link_state > LPFC_LINK_DOWN) { | 
 | 		phba->link_state = LPFC_LINK_DOWN; | 
 | 		if (phba->sli4_hba.conf_trunk) { | 
 | 			phba->trunk_link.link0.state = 0; | 
 | 			phba->trunk_link.link1.state = 0; | 
 | 			phba->trunk_link.link2.state = 0; | 
 | 			phba->trunk_link.link3.state = 0; | 
 | 			phba->trunk_link.phy_lnk_speed = | 
 | 						LPFC_LINK_SPEED_UNKNOWN; | 
 | 			phba->sli4_hba.link_state.logical_speed = | 
 | 						LPFC_LINK_SPEED_UNKNOWN; | 
 | 		} | 
 | 		clear_bit(FC_LBIT, &phba->pport->fc_flag); | 
 | 	} | 
 | 	vports = lpfc_create_vport_work_array(phba); | 
 | 	if (vports != NULL) { | 
 | 		for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) { | 
 | 			/* Issue a LINK DOWN event to all nodes */ | 
 | 			lpfc_linkdown_port(vports[i]); | 
 |  | 
 | 			vports[i]->fc_myDID = 0; | 
 |  | 
 | 			if ((vport->cfg_enable_fc4_type == LPFC_ENABLE_BOTH) || | 
 | 			    (vport->cfg_enable_fc4_type == LPFC_ENABLE_NVME)) { | 
 | 				if (phba->nvmet_support) | 
 | 					lpfc_nvmet_update_targetport(phba); | 
 | 				else | 
 | 					lpfc_nvme_update_localport(vports[i]); | 
 | 			} | 
 | 		} | 
 | 	} | 
 | 	lpfc_destroy_vport_work_array(phba, vports); | 
 |  | 
 | 	/* Clean up any SLI3 firmware default rpi's */ | 
 | 	if (phba->sli_rev > LPFC_SLI_REV3 || offline) | 
 | 		goto skip_unreg_did; | 
 |  | 
 | 	mb = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); | 
 | 	if (mb) { | 
 | 		lpfc_unreg_did(phba, 0xffff, LPFC_UNREG_ALL_DFLT_RPIS, mb); | 
 | 		mb->vport = vport; | 
 | 		mb->mbox_cmpl = lpfc_sli_def_mbox_cmpl; | 
 | 		if (lpfc_sli_issue_mbox(phba, mb, MBX_NOWAIT) | 
 | 		    == MBX_NOT_FINISHED) { | 
 | 			mempool_free(mb, phba->mbox_mem_pool); | 
 | 		} | 
 | 	} | 
 |  | 
 |  skip_unreg_did: | 
 | 	/* Setup myDID for link up if we are in pt2pt mode */ | 
 | 	if (test_bit(FC_PT2PT, &phba->pport->fc_flag)) { | 
 | 		mb = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); | 
 | 		if (mb) { | 
 | 			lpfc_config_link(phba, mb); | 
 | 			mb->mbox_cmpl = lpfc_sli_def_mbox_cmpl; | 
 | 			mb->vport = vport; | 
 | 			if (lpfc_sli_issue_mbox(phba, mb, MBX_NOWAIT) | 
 | 			    == MBX_NOT_FINISHED) { | 
 | 				mempool_free(mb, phba->mbox_mem_pool); | 
 | 			} | 
 | 		} | 
 | 		clear_bit(FC_PT2PT, &phba->pport->fc_flag); | 
 | 		clear_bit(FC_PT2PT_PLOGI, &phba->pport->fc_flag); | 
 | 		spin_lock_irq(shost->host_lock); | 
 | 		phba->pport->rcv_flogi_cnt = 0; | 
 | 		spin_unlock_irq(shost->host_lock); | 
 | 	} | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void | 
 | lpfc_linkup_cleanup_nodes(struct lpfc_vport *vport) | 
 | { | 
 | 	struct lpfc_nodelist *ndlp; | 
 |  | 
 | 	list_for_each_entry(ndlp, &vport->fc_nodes, nlp_listp) { | 
 | 		ndlp->nlp_fc4_type &= ~(NLP_FC4_FCP | NLP_FC4_NVME); | 
 |  | 
 | 		if (ndlp->nlp_state == NLP_STE_UNUSED_NODE) | 
 | 			continue; | 
 | 		if (ndlp->nlp_type & NLP_FABRIC) { | 
 | 			/* On Linkup its safe to clean up the ndlp | 
 | 			 * from Fabric connections. | 
 | 			 */ | 
 | 			if (ndlp->nlp_DID != Fabric_DID) | 
 | 				lpfc_unreg_rpi(vport, ndlp); | 
 | 			lpfc_nlp_set_state(vport, ndlp, NLP_STE_NPR_NODE); | 
 | 		} else if (!(ndlp->nlp_flag & NLP_NPR_ADISC)) { | 
 | 			/* Fail outstanding IO now since device is | 
 | 			 * marked for PLOGI. | 
 | 			 */ | 
 | 			lpfc_unreg_rpi(vport, ndlp); | 
 | 		} | 
 | 	} | 
 | } | 
 |  | 
 | static void | 
 | lpfc_linkup_port(struct lpfc_vport *vport) | 
 | { | 
 | 	struct Scsi_Host *shost = lpfc_shost_from_vport(vport); | 
 | 	struct lpfc_hba  *phba = vport->phba; | 
 |  | 
 | 	if (test_bit(FC_UNLOADING, &vport->load_flag)) | 
 | 		return; | 
 |  | 
 | 	lpfc_debugfs_disc_trc(vport, LPFC_DISC_TRC_ELS_CMD, | 
 | 		"Link Up:         top:x%x speed:x%x flg:x%x", | 
 | 		phba->fc_topology, phba->fc_linkspeed, phba->link_flag); | 
 |  | 
 | 	/* If NPIV is not enabled, only bring the physical port up */ | 
 | 	if (!(phba->sli3_options & LPFC_SLI3_NPIV_ENABLED) && | 
 | 		(vport != phba->pport)) | 
 | 		return; | 
 |  | 
 | 	if (phba->defer_flogi_acc.flag) { | 
 | 		clear_bit(FC_ABORT_DISCOVERY, &vport->fc_flag); | 
 | 		clear_bit(FC_RSCN_MODE, &vport->fc_flag); | 
 | 		clear_bit(FC_NLP_MORE, &vport->fc_flag); | 
 | 		clear_bit(FC_RSCN_DISCOVERY, &vport->fc_flag); | 
 | 	} else { | 
 | 		clear_bit(FC_PT2PT, &vport->fc_flag); | 
 | 		clear_bit(FC_PT2PT_PLOGI, &vport->fc_flag); | 
 | 		clear_bit(FC_ABORT_DISCOVERY, &vport->fc_flag); | 
 | 		clear_bit(FC_RSCN_MODE, &vport->fc_flag); | 
 | 		clear_bit(FC_NLP_MORE, &vport->fc_flag); | 
 | 		clear_bit(FC_RSCN_DISCOVERY, &vport->fc_flag); | 
 | 	} | 
 | 	set_bit(FC_NDISC_ACTIVE, &vport->fc_flag); | 
 |  | 
 | 	spin_lock_irq(shost->host_lock); | 
 | 	vport->fc_ns_retry = 0; | 
 | 	spin_unlock_irq(shost->host_lock); | 
 | 	lpfc_setup_fdmi_mask(vport); | 
 |  | 
 | 	lpfc_linkup_cleanup_nodes(vport); | 
 | } | 
 |  | 
 | static int | 
 | lpfc_linkup(struct lpfc_hba *phba) | 
 | { | 
 | 	struct lpfc_vport **vports; | 
 | 	int i; | 
 | 	struct Scsi_Host  *shost = lpfc_shost_from_vport(phba->pport); | 
 |  | 
 | 	phba->link_state = LPFC_LINK_UP; | 
 |  | 
 | 	/* Unblock fabric iocbs if they are blocked */ | 
 | 	clear_bit(FABRIC_COMANDS_BLOCKED, &phba->bit_flags); | 
 | 	del_timer_sync(&phba->fabric_block_timer); | 
 |  | 
 | 	vports = lpfc_create_vport_work_array(phba); | 
 | 	if (vports != NULL) | 
 | 		for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) | 
 | 			lpfc_linkup_port(vports[i]); | 
 | 	lpfc_destroy_vport_work_array(phba, vports); | 
 |  | 
 | 	/* Clear the pport flogi counter in case the link down was | 
 | 	 * absorbed without an ACQE. No lock here - in worker thread | 
 | 	 * and discovery is synchronized. | 
 | 	 */ | 
 | 	spin_lock_irq(shost->host_lock); | 
 | 	phba->pport->rcv_flogi_cnt = 0; | 
 | 	spin_unlock_irq(shost->host_lock); | 
 |  | 
 | 	/* reinitialize initial HBA flag */ | 
 | 	clear_bit(HBA_FLOGI_ISSUED, &phba->hba_flag); | 
 | 	clear_bit(HBA_RHBA_CMPL, &phba->hba_flag); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* | 
 |  * This routine handles processing a CLEAR_LA mailbox | 
 |  * command upon completion. It is setup in the LPFC_MBOXQ | 
 |  * as the completion routine when the command is | 
 |  * handed off to the SLI layer. SLI3 only. | 
 |  */ | 
 | static void | 
 | lpfc_mbx_cmpl_clear_la(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) | 
 | { | 
 | 	struct lpfc_vport *vport = pmb->vport; | 
 | 	struct lpfc_sli   *psli = &phba->sli; | 
 | 	MAILBOX_t *mb = &pmb->u.mb; | 
 | 	uint32_t control; | 
 |  | 
 | 	/* Since we don't do discovery right now, turn these off here */ | 
 | 	psli->sli3_ring[LPFC_EXTRA_RING].flag &= ~LPFC_STOP_IOCB_EVENT; | 
 | 	psli->sli3_ring[LPFC_FCP_RING].flag &= ~LPFC_STOP_IOCB_EVENT; | 
 |  | 
 | 	/* Check for error */ | 
 | 	if ((mb->mbxStatus) && (mb->mbxStatus != 0x1601)) { | 
 | 		/* CLEAR_LA mbox error <mbxStatus> state <hba_state> */ | 
 | 		lpfc_printf_vlog(vport, KERN_ERR, LOG_TRACE_EVENT, | 
 | 				 "0320 CLEAR_LA mbxStatus error x%x hba " | 
 | 				 "state x%x\n", | 
 | 				 mb->mbxStatus, vport->port_state); | 
 | 		phba->link_state = LPFC_HBA_ERROR; | 
 | 		goto out; | 
 | 	} | 
 |  | 
 | 	if (vport->port_type == LPFC_PHYSICAL_PORT) | 
 | 		phba->link_state = LPFC_HBA_READY; | 
 |  | 
 | 	spin_lock_irq(&phba->hbalock); | 
 | 	psli->sli_flag |= LPFC_PROCESS_LA; | 
 | 	control = readl(phba->HCregaddr); | 
 | 	control |= HC_LAINT_ENA; | 
 | 	writel(control, phba->HCregaddr); | 
 | 	readl(phba->HCregaddr); /* flush */ | 
 | 	spin_unlock_irq(&phba->hbalock); | 
 | 	mempool_free(pmb, phba->mbox_mem_pool); | 
 | 	return; | 
 |  | 
 | out: | 
 | 	/* Device Discovery completes */ | 
 | 	lpfc_printf_vlog(vport, KERN_INFO, LOG_DISCOVERY, | 
 | 			 "0225 Device Discovery completes\n"); | 
 | 	mempool_free(pmb, phba->mbox_mem_pool); | 
 |  | 
 | 	clear_bit(FC_ABORT_DISCOVERY, &vport->fc_flag); | 
 |  | 
 | 	lpfc_can_disctmo(vport); | 
 |  | 
 | 	/* turn on Link Attention interrupts */ | 
 |  | 
 | 	spin_lock_irq(&phba->hbalock); | 
 | 	psli->sli_flag |= LPFC_PROCESS_LA; | 
 | 	control = readl(phba->HCregaddr); | 
 | 	control |= HC_LAINT_ENA; | 
 | 	writel(control, phba->HCregaddr); | 
 | 	readl(phba->HCregaddr); /* flush */ | 
 | 	spin_unlock_irq(&phba->hbalock); | 
 |  | 
 | 	return; | 
 | } | 
 |  | 
 | void | 
 | lpfc_mbx_cmpl_local_config_link(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) | 
 | { | 
 | 	struct lpfc_vport *vport = pmb->vport; | 
 | 	LPFC_MBOXQ_t *sparam_mb; | 
 | 	u16 status = pmb->u.mb.mbxStatus; | 
 | 	int rc; | 
 |  | 
 | 	mempool_free(pmb, phba->mbox_mem_pool); | 
 |  | 
 | 	if (status) | 
 | 		goto out; | 
 |  | 
 | 	/* don't perform discovery for SLI4 loopback diagnostic test */ | 
 | 	if ((phba->sli_rev == LPFC_SLI_REV4) && | 
 | 	    !test_bit(HBA_FCOE_MODE, &phba->hba_flag) && | 
 | 	    (phba->link_flag & LS_LOOPBACK_MODE)) | 
 | 		return; | 
 |  | 
 | 	if (phba->fc_topology == LPFC_TOPOLOGY_LOOP && | 
 | 	    test_bit(FC_PUBLIC_LOOP, &vport->fc_flag) && | 
 | 	    !test_bit(FC_LBIT, &vport->fc_flag)) { | 
 | 			/* Need to wait for FAN - use discovery timer | 
 | 			 * for timeout.  port_state is identically | 
 | 			 * LPFC_LOCAL_CFG_LINK while waiting for FAN | 
 | 			 */ | 
 | 			lpfc_set_disctmo(vport); | 
 | 			return; | 
 | 	} | 
 |  | 
 | 	/* Start discovery by sending a FLOGI. port_state is identically | 
 | 	 * LPFC_FLOGI while waiting for FLOGI cmpl. | 
 | 	 */ | 
 | 	if (vport->port_state != LPFC_FLOGI) { | 
 | 		/* Issue MBX_READ_SPARAM to update CSPs before FLOGI if | 
 | 		 * bb-credit recovery is in place. | 
 | 		 */ | 
 | 		if (phba->bbcredit_support && phba->cfg_enable_bbcr && | 
 | 		    !(phba->link_flag & LS_LOOPBACK_MODE)) { | 
 | 			sparam_mb = mempool_alloc(phba->mbox_mem_pool, | 
 | 						  GFP_KERNEL); | 
 | 			if (!sparam_mb) | 
 | 				goto sparam_out; | 
 |  | 
 | 			rc = lpfc_read_sparam(phba, sparam_mb, 0); | 
 | 			if (rc) { | 
 | 				mempool_free(sparam_mb, phba->mbox_mem_pool); | 
 | 				goto sparam_out; | 
 | 			} | 
 | 			sparam_mb->vport = vport; | 
 | 			sparam_mb->mbox_cmpl = lpfc_mbx_cmpl_read_sparam; | 
 | 			rc = lpfc_sli_issue_mbox(phba, sparam_mb, MBX_NOWAIT); | 
 | 			if (rc == MBX_NOT_FINISHED) { | 
 | 				lpfc_mbox_rsrc_cleanup(phba, sparam_mb, | 
 | 						       MBOX_THD_UNLOCKED); | 
 | 				goto sparam_out; | 
 | 			} | 
 |  | 
 | 			set_bit(HBA_DEFER_FLOGI, &phba->hba_flag); | 
 | 		}  else { | 
 | 			lpfc_initial_flogi(vport); | 
 | 		} | 
 | 	} else { | 
 | 		if (test_bit(FC_PT2PT, &vport->fc_flag)) | 
 | 			lpfc_disc_start(vport); | 
 | 	} | 
 | 	return; | 
 |  | 
 | out: | 
 | 	lpfc_printf_vlog(vport, KERN_ERR, LOG_TRACE_EVENT, | 
 | 			 "0306 CONFIG_LINK mbxStatus error x%x HBA state x%x\n", | 
 | 			 status, vport->port_state); | 
 |  | 
 | sparam_out: | 
 | 	lpfc_linkdown(phba); | 
 |  | 
 | 	lpfc_printf_vlog(vport, KERN_ERR, LOG_TRACE_EVENT, | 
 | 			 "0200 CONFIG_LINK bad hba state x%x\n", | 
 | 			 vport->port_state); | 
 |  | 
 | 	lpfc_issue_clear_la(phba, vport); | 
 | 	return; | 
 | } | 
 |  | 
 | /** | 
 |  * lpfc_sli4_clear_fcf_rr_bmask | 
 |  * @phba: pointer to the struct lpfc_hba for this port. | 
 |  * This fucnction resets the round robin bit mask and clears the | 
 |  * fcf priority list. The list deletions are done while holding the | 
 |  * hbalock. The ON_LIST flag and the FLOGI_FAILED flags are cleared | 
 |  * from the lpfc_fcf_pri record. | 
 |  **/ | 
 | void | 
 | lpfc_sli4_clear_fcf_rr_bmask(struct lpfc_hba *phba) | 
 | { | 
 | 	struct lpfc_fcf_pri *fcf_pri; | 
 | 	struct lpfc_fcf_pri *next_fcf_pri; | 
 | 	memset(phba->fcf.fcf_rr_bmask, 0, sizeof(*phba->fcf.fcf_rr_bmask)); | 
 | 	spin_lock_irq(&phba->hbalock); | 
 | 	list_for_each_entry_safe(fcf_pri, next_fcf_pri, | 
 | 				&phba->fcf.fcf_pri_list, list) { | 
 | 		list_del_init(&fcf_pri->list); | 
 | 		fcf_pri->fcf_rec.flag = 0; | 
 | 	} | 
 | 	spin_unlock_irq(&phba->hbalock); | 
 | } | 
 | static void | 
 | lpfc_mbx_cmpl_reg_fcfi(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq) | 
 | { | 
 | 	struct lpfc_vport *vport = mboxq->vport; | 
 |  | 
 | 	if (mboxq->u.mb.mbxStatus) { | 
 | 		lpfc_printf_vlog(vport, KERN_ERR, LOG_TRACE_EVENT, | 
 | 				 "2017 REG_FCFI mbxStatus error x%x " | 
 | 				 "HBA state x%x\n", mboxq->u.mb.mbxStatus, | 
 | 				 vport->port_state); | 
 | 		goto fail_out; | 
 | 	} | 
 |  | 
 | 	/* Start FCoE discovery by sending a FLOGI. */ | 
 | 	phba->fcf.fcfi = bf_get(lpfc_reg_fcfi_fcfi, &mboxq->u.mqe.un.reg_fcfi); | 
 | 	/* Set the FCFI registered flag */ | 
 | 	spin_lock_irq(&phba->hbalock); | 
 | 	phba->fcf.fcf_flag |= FCF_REGISTERED; | 
 | 	spin_unlock_irq(&phba->hbalock); | 
 |  | 
 | 	/* If there is a pending FCoE event, restart FCF table scan. */ | 
 | 	if (!test_bit(FCF_RR_INPROG, &phba->hba_flag) && | 
 | 	    lpfc_check_pending_fcoe_event(phba, LPFC_UNREG_FCF)) | 
 | 		goto fail_out; | 
 |  | 
 | 	/* Mark successful completion of FCF table scan */ | 
 | 	spin_lock_irq(&phba->hbalock); | 
 | 	phba->fcf.fcf_flag |= (FCF_SCAN_DONE | FCF_IN_USE); | 
 | 	spin_unlock_irq(&phba->hbalock); | 
 | 	clear_bit(FCF_TS_INPROG, &phba->hba_flag); | 
 | 	if (vport->port_state != LPFC_FLOGI) { | 
 | 		set_bit(FCF_RR_INPROG, &phba->hba_flag); | 
 | 		lpfc_issue_init_vfi(vport); | 
 | 	} | 
 | 	goto out; | 
 |  | 
 | fail_out: | 
 | 	clear_bit(FCF_RR_INPROG, &phba->hba_flag); | 
 | out: | 
 | 	mempool_free(mboxq, phba->mbox_mem_pool); | 
 | } | 
 |  | 
 | /** | 
 |  * lpfc_fab_name_match - Check if the fcf fabric name match. | 
 |  * @fab_name: pointer to fabric name. | 
 |  * @new_fcf_record: pointer to fcf record. | 
 |  * | 
 |  * This routine compare the fcf record's fabric name with provided | 
 |  * fabric name. If the fabric name are identical this function | 
 |  * returns 1 else return 0. | 
 |  **/ | 
 | static uint32_t | 
 | lpfc_fab_name_match(uint8_t *fab_name, struct fcf_record *new_fcf_record) | 
 | { | 
 | 	if (fab_name[0] != bf_get(lpfc_fcf_record_fab_name_0, new_fcf_record)) | 
 | 		return 0; | 
 | 	if (fab_name[1] != bf_get(lpfc_fcf_record_fab_name_1, new_fcf_record)) | 
 | 		return 0; | 
 | 	if (fab_name[2] != bf_get(lpfc_fcf_record_fab_name_2, new_fcf_record)) | 
 | 		return 0; | 
 | 	if (fab_name[3] != bf_get(lpfc_fcf_record_fab_name_3, new_fcf_record)) | 
 | 		return 0; | 
 | 	if (fab_name[4] != bf_get(lpfc_fcf_record_fab_name_4, new_fcf_record)) | 
 | 		return 0; | 
 | 	if (fab_name[5] != bf_get(lpfc_fcf_record_fab_name_5, new_fcf_record)) | 
 | 		return 0; | 
 | 	if (fab_name[6] != bf_get(lpfc_fcf_record_fab_name_6, new_fcf_record)) | 
 | 		return 0; | 
 | 	if (fab_name[7] != bf_get(lpfc_fcf_record_fab_name_7, new_fcf_record)) | 
 | 		return 0; | 
 | 	return 1; | 
 | } | 
 |  | 
 | /** | 
 |  * lpfc_sw_name_match - Check if the fcf switch name match. | 
 |  * @sw_name: pointer to switch name. | 
 |  * @new_fcf_record: pointer to fcf record. | 
 |  * | 
 |  * This routine compare the fcf record's switch name with provided | 
 |  * switch name. If the switch name are identical this function | 
 |  * returns 1 else return 0. | 
 |  **/ | 
 | static uint32_t | 
 | lpfc_sw_name_match(uint8_t *sw_name, struct fcf_record *new_fcf_record) | 
 | { | 
 | 	if (sw_name[0] != bf_get(lpfc_fcf_record_switch_name_0, new_fcf_record)) | 
 | 		return 0; | 
 | 	if (sw_name[1] != bf_get(lpfc_fcf_record_switch_name_1, new_fcf_record)) | 
 | 		return 0; | 
 | 	if (sw_name[2] != bf_get(lpfc_fcf_record_switch_name_2, new_fcf_record)) | 
 | 		return 0; | 
 | 	if (sw_name[3] != bf_get(lpfc_fcf_record_switch_name_3, new_fcf_record)) | 
 | 		return 0; | 
 | 	if (sw_name[4] != bf_get(lpfc_fcf_record_switch_name_4, new_fcf_record)) | 
 | 		return 0; | 
 | 	if (sw_name[5] != bf_get(lpfc_fcf_record_switch_name_5, new_fcf_record)) | 
 | 		return 0; | 
 | 	if (sw_name[6] != bf_get(lpfc_fcf_record_switch_name_6, new_fcf_record)) | 
 | 		return 0; | 
 | 	if (sw_name[7] != bf_get(lpfc_fcf_record_switch_name_7, new_fcf_record)) | 
 | 		return 0; | 
 | 	return 1; | 
 | } | 
 |  | 
 | /** | 
 |  * lpfc_mac_addr_match - Check if the fcf mac address match. | 
 |  * @mac_addr: pointer to mac address. | 
 |  * @new_fcf_record: pointer to fcf record. | 
 |  * | 
 |  * This routine compare the fcf record's mac address with HBA's | 
 |  * FCF mac address. If the mac addresses are identical this function | 
 |  * returns 1 else return 0. | 
 |  **/ | 
 | static uint32_t | 
 | lpfc_mac_addr_match(uint8_t *mac_addr, struct fcf_record *new_fcf_record) | 
 | { | 
 | 	if (mac_addr[0] != bf_get(lpfc_fcf_record_mac_0, new_fcf_record)) | 
 | 		return 0; | 
 | 	if (mac_addr[1] != bf_get(lpfc_fcf_record_mac_1, new_fcf_record)) | 
 | 		return 0; | 
 | 	if (mac_addr[2] != bf_get(lpfc_fcf_record_mac_2, new_fcf_record)) | 
 | 		return 0; | 
 | 	if (mac_addr[3] != bf_get(lpfc_fcf_record_mac_3, new_fcf_record)) | 
 | 		return 0; | 
 | 	if (mac_addr[4] != bf_get(lpfc_fcf_record_mac_4, new_fcf_record)) | 
 | 		return 0; | 
 | 	if (mac_addr[5] != bf_get(lpfc_fcf_record_mac_5, new_fcf_record)) | 
 | 		return 0; | 
 | 	return 1; | 
 | } | 
 |  | 
 | static bool | 
 | lpfc_vlan_id_match(uint16_t curr_vlan_id, uint16_t new_vlan_id) | 
 | { | 
 | 	return (curr_vlan_id == new_vlan_id); | 
 | } | 
 |  | 
 | /** | 
 |  * __lpfc_update_fcf_record_pri - update the lpfc_fcf_pri record. | 
 |  * @phba: pointer to lpfc hba data structure. | 
 |  * @fcf_index: Index for the lpfc_fcf_record. | 
 |  * @new_fcf_record: pointer to hba fcf record. | 
 |  * | 
 |  * This routine updates the driver FCF priority record from the new HBA FCF | 
 |  * record. The hbalock is asserted held in the code path calling this | 
 |  * routine. | 
 |  **/ | 
 | static void | 
 | __lpfc_update_fcf_record_pri(struct lpfc_hba *phba, uint16_t fcf_index, | 
 | 				 struct fcf_record *new_fcf_record | 
 | 				 ) | 
 | { | 
 | 	struct lpfc_fcf_pri *fcf_pri; | 
 |  | 
 | 	fcf_pri = &phba->fcf.fcf_pri[fcf_index]; | 
 | 	fcf_pri->fcf_rec.fcf_index = fcf_index; | 
 | 	/* FCF record priority */ | 
 | 	fcf_pri->fcf_rec.priority = new_fcf_record->fip_priority; | 
 |  | 
 | } | 
 |  | 
 | /** | 
 |  * lpfc_copy_fcf_record - Copy fcf information to lpfc_hba. | 
 |  * @fcf_rec: pointer to driver fcf record. | 
 |  * @new_fcf_record: pointer to fcf record. | 
 |  * | 
 |  * This routine copies the FCF information from the FCF | 
 |  * record to lpfc_hba data structure. | 
 |  **/ | 
 | static void | 
 | lpfc_copy_fcf_record(struct lpfc_fcf_rec *fcf_rec, | 
 | 		     struct fcf_record *new_fcf_record) | 
 | { | 
 | 	/* Fabric name */ | 
 | 	fcf_rec->fabric_name[0] = | 
 | 		bf_get(lpfc_fcf_record_fab_name_0, new_fcf_record); | 
 | 	fcf_rec->fabric_name[1] = | 
 | 		bf_get(lpfc_fcf_record_fab_name_1, new_fcf_record); | 
 | 	fcf_rec->fabric_name[2] = | 
 | 		bf_get(lpfc_fcf_record_fab_name_2, new_fcf_record); | 
 | 	fcf_rec->fabric_name[3] = | 
 | 		bf_get(lpfc_fcf_record_fab_name_3, new_fcf_record); | 
 | 	fcf_rec->fabric_name[4] = | 
 | 		bf_get(lpfc_fcf_record_fab_name_4, new_fcf_record); | 
 | 	fcf_rec->fabric_name[5] = | 
 | 		bf_get(lpfc_fcf_record_fab_name_5, new_fcf_record); | 
 | 	fcf_rec->fabric_name[6] = | 
 | 		bf_get(lpfc_fcf_record_fab_name_6, new_fcf_record); | 
 | 	fcf_rec->fabric_name[7] = | 
 | 		bf_get(lpfc_fcf_record_fab_name_7, new_fcf_record); | 
 | 	/* Mac address */ | 
 | 	fcf_rec->mac_addr[0] = bf_get(lpfc_fcf_record_mac_0, new_fcf_record); | 
 | 	fcf_rec->mac_addr[1] = bf_get(lpfc_fcf_record_mac_1, new_fcf_record); | 
 | 	fcf_rec->mac_addr[2] = bf_get(lpfc_fcf_record_mac_2, new_fcf_record); | 
 | 	fcf_rec->mac_addr[3] = bf_get(lpfc_fcf_record_mac_3, new_fcf_record); | 
 | 	fcf_rec->mac_addr[4] = bf_get(lpfc_fcf_record_mac_4, new_fcf_record); | 
 | 	fcf_rec->mac_addr[5] = bf_get(lpfc_fcf_record_mac_5, new_fcf_record); | 
 | 	/* FCF record index */ | 
 | 	fcf_rec->fcf_indx = bf_get(lpfc_fcf_record_fcf_index, new_fcf_record); | 
 | 	/* FCF record priority */ | 
 | 	fcf_rec->priority = new_fcf_record->fip_priority; | 
 | 	/* Switch name */ | 
 | 	fcf_rec->switch_name[0] = | 
 | 		bf_get(lpfc_fcf_record_switch_name_0, new_fcf_record); | 
 | 	fcf_rec->switch_name[1] = | 
 | 		bf_get(lpfc_fcf_record_switch_name_1, new_fcf_record); | 
 | 	fcf_rec->switch_name[2] = | 
 | 		bf_get(lpfc_fcf_record_switch_name_2, new_fcf_record); | 
 | 	fcf_rec->switch_name[3] = | 
 | 		bf_get(lpfc_fcf_record_switch_name_3, new_fcf_record); | 
 | 	fcf_rec->switch_name[4] = | 
 | 		bf_get(lpfc_fcf_record_switch_name_4, new_fcf_record); | 
 | 	fcf_rec->switch_name[5] = | 
 | 		bf_get(lpfc_fcf_record_switch_name_5, new_fcf_record); | 
 | 	fcf_rec->switch_name[6] = | 
 | 		bf_get(lpfc_fcf_record_switch_name_6, new_fcf_record); | 
 | 	fcf_rec->switch_name[7] = | 
 | 		bf_get(lpfc_fcf_record_switch_name_7, new_fcf_record); | 
 | } | 
 |  | 
 | /** | 
 |  * __lpfc_update_fcf_record - Update driver fcf record | 
 |  * @phba: pointer to lpfc hba data structure. | 
 |  * @fcf_rec: pointer to driver fcf record. | 
 |  * @new_fcf_record: pointer to hba fcf record. | 
 |  * @addr_mode: address mode to be set to the driver fcf record. | 
 |  * @vlan_id: vlan tag to be set to the driver fcf record. | 
 |  * @flag: flag bits to be set to the driver fcf record. | 
 |  * | 
 |  * This routine updates the driver FCF record from the new HBA FCF record | 
 |  * together with the address mode, vlan_id, and other informations. This | 
 |  * routine is called with the hbalock held. | 
 |  **/ | 
 | static void | 
 | __lpfc_update_fcf_record(struct lpfc_hba *phba, struct lpfc_fcf_rec *fcf_rec, | 
 | 		       struct fcf_record *new_fcf_record, uint32_t addr_mode, | 
 | 		       uint16_t vlan_id, uint32_t flag) | 
 | { | 
 | 	lockdep_assert_held(&phba->hbalock); | 
 |  | 
 | 	/* Copy the fields from the HBA's FCF record */ | 
 | 	lpfc_copy_fcf_record(fcf_rec, new_fcf_record); | 
 | 	/* Update other fields of driver FCF record */ | 
 | 	fcf_rec->addr_mode = addr_mode; | 
 | 	fcf_rec->vlan_id = vlan_id; | 
 | 	fcf_rec->flag |= (flag | RECORD_VALID); | 
 | 	__lpfc_update_fcf_record_pri(phba, | 
 | 		bf_get(lpfc_fcf_record_fcf_index, new_fcf_record), | 
 | 				 new_fcf_record); | 
 | } | 
 |  | 
 | /** | 
 |  * lpfc_register_fcf - Register the FCF with hba. | 
 |  * @phba: pointer to lpfc hba data structure. | 
 |  * | 
 |  * This routine issues a register fcfi mailbox command to register | 
 |  * the fcf with HBA. | 
 |  **/ | 
 | static void | 
 | lpfc_register_fcf(struct lpfc_hba *phba) | 
 | { | 
 | 	LPFC_MBOXQ_t *fcf_mbxq; | 
 | 	int rc; | 
 |  | 
 | 	spin_lock_irq(&phba->hbalock); | 
 | 	/* If the FCF is not available do nothing. */ | 
 | 	if (!(phba->fcf.fcf_flag & FCF_AVAILABLE)) { | 
 | 		spin_unlock_irq(&phba->hbalock); | 
 | 		clear_bit(FCF_TS_INPROG, &phba->hba_flag); | 
 | 		clear_bit(FCF_RR_INPROG, &phba->hba_flag); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	/* The FCF is already registered, start discovery */ | 
 | 	if (phba->fcf.fcf_flag & FCF_REGISTERED) { | 
 | 		phba->fcf.fcf_flag |= (FCF_SCAN_DONE | FCF_IN_USE); | 
 | 		spin_unlock_irq(&phba->hbalock); | 
 | 		clear_bit(FCF_TS_INPROG, &phba->hba_flag); | 
 | 		if (phba->pport->port_state != LPFC_FLOGI && | 
 | 		    test_bit(FC_FABRIC, &phba->pport->fc_flag)) { | 
 | 			set_bit(FCF_RR_INPROG, &phba->hba_flag); | 
 | 			lpfc_initial_flogi(phba->pport); | 
 | 			return; | 
 | 		} | 
 | 		return; | 
 | 	} | 
 | 	spin_unlock_irq(&phba->hbalock); | 
 |  | 
 | 	fcf_mbxq = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); | 
 | 	if (!fcf_mbxq) { | 
 | 		clear_bit(FCF_TS_INPROG, &phba->hba_flag); | 
 | 		clear_bit(FCF_RR_INPROG, &phba->hba_flag); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	lpfc_reg_fcfi(phba, fcf_mbxq); | 
 | 	fcf_mbxq->vport = phba->pport; | 
 | 	fcf_mbxq->mbox_cmpl = lpfc_mbx_cmpl_reg_fcfi; | 
 | 	rc = lpfc_sli_issue_mbox(phba, fcf_mbxq, MBX_NOWAIT); | 
 | 	if (rc == MBX_NOT_FINISHED) { | 
 | 		clear_bit(FCF_TS_INPROG, &phba->hba_flag); | 
 | 		clear_bit(FCF_RR_INPROG, &phba->hba_flag); | 
 | 		mempool_free(fcf_mbxq, phba->mbox_mem_pool); | 
 | 	} | 
 |  | 
 | 	return; | 
 | } | 
 |  | 
 | /** | 
 |  * lpfc_match_fcf_conn_list - Check if the FCF record can be used for discovery. | 
 |  * @phba: pointer to lpfc hba data structure. | 
 |  * @new_fcf_record: pointer to fcf record. | 
 |  * @boot_flag: Indicates if this record used by boot bios. | 
 |  * @addr_mode: The address mode to be used by this FCF | 
 |  * @vlan_id: The vlan id to be used as vlan tagging by this FCF. | 
 |  * | 
 |  * This routine compare the fcf record with connect list obtained from the | 
 |  * config region to decide if this FCF can be used for SAN discovery. It returns | 
 |  * 1 if this record can be used for SAN discovery else return zero. If this FCF | 
 |  * record can be used for SAN discovery, the boot_flag will indicate if this FCF | 
 |  * is used by boot bios and addr_mode will indicate the addressing mode to be | 
 |  * used for this FCF when the function returns. | 
 |  * If the FCF record need to be used with a particular vlan id, the vlan is | 
 |  * set in the vlan_id on return of the function. If not VLAN tagging need to | 
 |  * be used with the FCF vlan_id will be set to LPFC_FCOE_NULL_VID; | 
 |  **/ | 
 | static int | 
 | lpfc_match_fcf_conn_list(struct lpfc_hba *phba, | 
 | 			struct fcf_record *new_fcf_record, | 
 | 			uint32_t *boot_flag, uint32_t *addr_mode, | 
 | 			uint16_t *vlan_id) | 
 | { | 
 | 	struct lpfc_fcf_conn_entry *conn_entry; | 
 | 	int i, j, fcf_vlan_id = 0; | 
 |  | 
 | 	/* Find the lowest VLAN id in the FCF record */ | 
 | 	for (i = 0; i < 512; i++) { | 
 | 		if (new_fcf_record->vlan_bitmap[i]) { | 
 | 			fcf_vlan_id = i * 8; | 
 | 			j = 0; | 
 | 			while (!((new_fcf_record->vlan_bitmap[i] >> j) & 1)) { | 
 | 				j++; | 
 | 				fcf_vlan_id++; | 
 | 			} | 
 | 			break; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	/* FCF not valid/available or solicitation in progress */ | 
 | 	if (!bf_get(lpfc_fcf_record_fcf_avail, new_fcf_record) || | 
 | 	    !bf_get(lpfc_fcf_record_fcf_valid, new_fcf_record) || | 
 | 	    bf_get(lpfc_fcf_record_fcf_sol, new_fcf_record)) | 
 | 		return 0; | 
 |  | 
 | 	if (!test_bit(HBA_FIP_SUPPORT, &phba->hba_flag)) { | 
 | 		*boot_flag = 0; | 
 | 		*addr_mode = bf_get(lpfc_fcf_record_mac_addr_prov, | 
 | 				new_fcf_record); | 
 | 		if (phba->valid_vlan) | 
 | 			*vlan_id = phba->vlan_id; | 
 | 		else | 
 | 			*vlan_id = LPFC_FCOE_NULL_VID; | 
 | 		return 1; | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * If there are no FCF connection table entry, driver connect to all | 
 | 	 * FCFs. | 
 | 	 */ | 
 | 	if (list_empty(&phba->fcf_conn_rec_list)) { | 
 | 		*boot_flag = 0; | 
 | 		*addr_mode = bf_get(lpfc_fcf_record_mac_addr_prov, | 
 | 			new_fcf_record); | 
 |  | 
 | 		/* | 
 | 		 * When there are no FCF connect entries, use driver's default | 
 | 		 * addressing mode - FPMA. | 
 | 		 */ | 
 | 		if (*addr_mode & LPFC_FCF_FPMA) | 
 | 			*addr_mode = LPFC_FCF_FPMA; | 
 |  | 
 | 		/* If FCF record report a vlan id use that vlan id */ | 
 | 		if (fcf_vlan_id) | 
 | 			*vlan_id = fcf_vlan_id; | 
 | 		else | 
 | 			*vlan_id = LPFC_FCOE_NULL_VID; | 
 | 		return 1; | 
 | 	} | 
 |  | 
 | 	list_for_each_entry(conn_entry, | 
 | 			    &phba->fcf_conn_rec_list, list) { | 
 | 		if (!(conn_entry->conn_rec.flags & FCFCNCT_VALID)) | 
 | 			continue; | 
 |  | 
 | 		if ((conn_entry->conn_rec.flags & FCFCNCT_FBNM_VALID) && | 
 | 			!lpfc_fab_name_match(conn_entry->conn_rec.fabric_name, | 
 | 					     new_fcf_record)) | 
 | 			continue; | 
 | 		if ((conn_entry->conn_rec.flags & FCFCNCT_SWNM_VALID) && | 
 | 			!lpfc_sw_name_match(conn_entry->conn_rec.switch_name, | 
 | 					    new_fcf_record)) | 
 | 			continue; | 
 | 		if (conn_entry->conn_rec.flags & FCFCNCT_VLAN_VALID) { | 
 | 			/* | 
 | 			 * If the vlan bit map does not have the bit set for the | 
 | 			 * vlan id to be used, then it is not a match. | 
 | 			 */ | 
 | 			if (!(new_fcf_record->vlan_bitmap | 
 | 				[conn_entry->conn_rec.vlan_tag / 8] & | 
 | 				(1 << (conn_entry->conn_rec.vlan_tag % 8)))) | 
 | 				continue; | 
 | 		} | 
 |  | 
 | 		/* | 
 | 		 * If connection record does not support any addressing mode, | 
 | 		 * skip the FCF record. | 
 | 		 */ | 
 | 		if (!(bf_get(lpfc_fcf_record_mac_addr_prov, new_fcf_record) | 
 | 			& (LPFC_FCF_FPMA | LPFC_FCF_SPMA))) | 
 | 			continue; | 
 |  | 
 | 		/* | 
 | 		 * Check if the connection record specifies a required | 
 | 		 * addressing mode. | 
 | 		 */ | 
 | 		if ((conn_entry->conn_rec.flags & FCFCNCT_AM_VALID) && | 
 | 			!(conn_entry->conn_rec.flags & FCFCNCT_AM_PREFERRED)) { | 
 |  | 
 | 			/* | 
 | 			 * If SPMA required but FCF not support this continue. | 
 | 			 */ | 
 | 			if ((conn_entry->conn_rec.flags & FCFCNCT_AM_SPMA) && | 
 | 				!(bf_get(lpfc_fcf_record_mac_addr_prov, | 
 | 					new_fcf_record) & LPFC_FCF_SPMA)) | 
 | 				continue; | 
 |  | 
 | 			/* | 
 | 			 * If FPMA required but FCF not support this continue. | 
 | 			 */ | 
 | 			if (!(conn_entry->conn_rec.flags & FCFCNCT_AM_SPMA) && | 
 | 				!(bf_get(lpfc_fcf_record_mac_addr_prov, | 
 | 				new_fcf_record) & LPFC_FCF_FPMA)) | 
 | 				continue; | 
 | 		} | 
 |  | 
 | 		/* | 
 | 		 * This fcf record matches filtering criteria. | 
 | 		 */ | 
 | 		if (conn_entry->conn_rec.flags & FCFCNCT_BOOT) | 
 | 			*boot_flag = 1; | 
 | 		else | 
 | 			*boot_flag = 0; | 
 |  | 
 | 		/* | 
 | 		 * If user did not specify any addressing mode, or if the | 
 | 		 * preferred addressing mode specified by user is not supported | 
 | 		 * by FCF, allow fabric to pick the addressing mode. | 
 | 		 */ | 
 | 		*addr_mode = bf_get(lpfc_fcf_record_mac_addr_prov, | 
 | 				new_fcf_record); | 
 | 		/* | 
 | 		 * If the user specified a required address mode, assign that | 
 | 		 * address mode | 
 | 		 */ | 
 | 		if ((conn_entry->conn_rec.flags & FCFCNCT_AM_VALID) && | 
 | 			(!(conn_entry->conn_rec.flags & FCFCNCT_AM_PREFERRED))) | 
 | 			*addr_mode = (conn_entry->conn_rec.flags & | 
 | 				FCFCNCT_AM_SPMA) ? | 
 | 				LPFC_FCF_SPMA : LPFC_FCF_FPMA; | 
 | 		/* | 
 | 		 * If the user specified a preferred address mode, use the | 
 | 		 * addr mode only if FCF support the addr_mode. | 
 | 		 */ | 
 | 		else if ((conn_entry->conn_rec.flags & FCFCNCT_AM_VALID) && | 
 | 			(conn_entry->conn_rec.flags & FCFCNCT_AM_PREFERRED) && | 
 | 			(conn_entry->conn_rec.flags & FCFCNCT_AM_SPMA) && | 
 | 			(*addr_mode & LPFC_FCF_SPMA)) | 
 | 				*addr_mode = LPFC_FCF_SPMA; | 
 | 		else if ((conn_entry->conn_rec.flags & FCFCNCT_AM_VALID) && | 
 | 			(conn_entry->conn_rec.flags & FCFCNCT_AM_PREFERRED) && | 
 | 			!(conn_entry->conn_rec.flags & FCFCNCT_AM_SPMA) && | 
 | 			(*addr_mode & LPFC_FCF_FPMA)) | 
 | 				*addr_mode = LPFC_FCF_FPMA; | 
 |  | 
 | 		/* If matching connect list has a vlan id, use it */ | 
 | 		if (conn_entry->conn_rec.flags & FCFCNCT_VLAN_VALID) | 
 | 			*vlan_id = conn_entry->conn_rec.vlan_tag; | 
 | 		/* | 
 | 		 * If no vlan id is specified in connect list, use the vlan id | 
 | 		 * in the FCF record | 
 | 		 */ | 
 | 		else if (fcf_vlan_id) | 
 | 			*vlan_id = fcf_vlan_id; | 
 | 		else | 
 | 			*vlan_id = LPFC_FCOE_NULL_VID; | 
 |  | 
 | 		return 1; | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | /** | 
 |  * lpfc_check_pending_fcoe_event - Check if there is pending fcoe event. | 
 |  * @phba: pointer to lpfc hba data structure. | 
 |  * @unreg_fcf: Unregister FCF if FCF table need to be re-scaned. | 
 |  * | 
 |  * This function check if there is any fcoe event pending while driver | 
 |  * scan FCF entries. If there is any pending event, it will restart the | 
 |  * FCF saning and return 1 else return 0. | 
 |  */ | 
 | int | 
 | lpfc_check_pending_fcoe_event(struct lpfc_hba *phba, uint8_t unreg_fcf) | 
 | { | 
 | 	/* | 
 | 	 * If the Link is up and no FCoE events while in the | 
 | 	 * FCF discovery, no need to restart FCF discovery. | 
 | 	 */ | 
 | 	if ((phba->link_state  >= LPFC_LINK_UP) && | 
 | 	    (phba->fcoe_eventtag == phba->fcoe_eventtag_at_fcf_scan)) | 
 | 		return 0; | 
 |  | 
 | 	lpfc_printf_log(phba, KERN_INFO, LOG_FIP, | 
 | 			"2768 Pending link or FCF event during current " | 
 | 			"handling of the previous event: link_state:x%x, " | 
 | 			"evt_tag_at_scan:x%x, evt_tag_current:x%x\n", | 
 | 			phba->link_state, phba->fcoe_eventtag_at_fcf_scan, | 
 | 			phba->fcoe_eventtag); | 
 |  | 
 | 	spin_lock_irq(&phba->hbalock); | 
 | 	phba->fcf.fcf_flag &= ~FCF_AVAILABLE; | 
 | 	spin_unlock_irq(&phba->hbalock); | 
 |  | 
 | 	if (phba->link_state >= LPFC_LINK_UP) { | 
 | 		lpfc_printf_log(phba, KERN_INFO, LOG_FIP | LOG_DISCOVERY, | 
 | 				"2780 Restart FCF table scan due to " | 
 | 				"pending FCF event:evt_tag_at_scan:x%x, " | 
 | 				"evt_tag_current:x%x\n", | 
 | 				phba->fcoe_eventtag_at_fcf_scan, | 
 | 				phba->fcoe_eventtag); | 
 | 		lpfc_sli4_fcf_scan_read_fcf_rec(phba, LPFC_FCOE_FCF_GET_FIRST); | 
 | 	} else { | 
 | 		/* | 
 | 		 * Do not continue FCF discovery and clear FCF_TS_INPROG | 
 | 		 * flag | 
 | 		 */ | 
 | 		lpfc_printf_log(phba, KERN_INFO, LOG_FIP | LOG_DISCOVERY, | 
 | 				"2833 Stop FCF discovery process due to link " | 
 | 				"state change (x%x)\n", phba->link_state); | 
 | 		clear_bit(FCF_TS_INPROG, &phba->hba_flag); | 
 | 		clear_bit(FCF_RR_INPROG, &phba->hba_flag); | 
 | 		spin_lock_irq(&phba->hbalock); | 
 | 		phba->fcf.fcf_flag &= ~(FCF_REDISC_FOV | FCF_DISCOVERY); | 
 | 		spin_unlock_irq(&phba->hbalock); | 
 | 	} | 
 |  | 
 | 	/* Unregister the currently registered FCF if required */ | 
 | 	if (unreg_fcf) { | 
 | 		spin_lock_irq(&phba->hbalock); | 
 | 		phba->fcf.fcf_flag &= ~FCF_REGISTERED; | 
 | 		spin_unlock_irq(&phba->hbalock); | 
 | 		lpfc_sli4_unregister_fcf(phba); | 
 | 	} | 
 | 	return 1; | 
 | } | 
 |  | 
 | /** | 
 |  * lpfc_sli4_new_fcf_random_select - Randomly select an eligible new fcf record | 
 |  * @phba: pointer to lpfc hba data structure. | 
 |  * @fcf_cnt: number of eligible fcf record seen so far. | 
 |  * | 
 |  * This function makes an running random selection decision on FCF record to | 
 |  * use through a sequence of @fcf_cnt eligible FCF records with equal | 
 |  * probability. To perform integer manunipulation of random numbers with | 
 |  * size unit32_t, a 16-bit random number returned from get_random_u16() is | 
 |  * taken as the random random number generated. | 
 |  * | 
 |  * Returns true when outcome is for the newly read FCF record should be | 
 |  * chosen; otherwise, return false when outcome is for keeping the previously | 
 |  * chosen FCF record. | 
 |  **/ | 
 | static bool | 
 | lpfc_sli4_new_fcf_random_select(struct lpfc_hba *phba, uint32_t fcf_cnt) | 
 | { | 
 | 	uint32_t rand_num; | 
 |  | 
 | 	/* Get 16-bit uniform random number */ | 
 | 	rand_num = get_random_u16(); | 
 |  | 
 | 	/* Decision with probability 1/fcf_cnt */ | 
 | 	if ((fcf_cnt * rand_num) < 0xFFFF) | 
 | 		return true; | 
 | 	else | 
 | 		return false; | 
 | } | 
 |  | 
 | /** | 
 |  * lpfc_sli4_fcf_rec_mbox_parse - Parse read_fcf mbox command. | 
 |  * @phba: pointer to lpfc hba data structure. | 
 |  * @mboxq: pointer to mailbox object. | 
 |  * @next_fcf_index: pointer to holder of next fcf index. | 
 |  * | 
 |  * This routine parses the non-embedded fcf mailbox command by performing the | 
 |  * necessarily error checking, non-embedded read FCF record mailbox command | 
 |  * SGE parsing, and endianness swapping. | 
 |  * | 
 |  * Returns the pointer to the new FCF record in the non-embedded mailbox | 
 |  * command DMA memory if successfully, other NULL. | 
 |  */ | 
 | static struct fcf_record * | 
 | lpfc_sli4_fcf_rec_mbox_parse(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq, | 
 | 			     uint16_t *next_fcf_index) | 
 | { | 
 | 	void *virt_addr; | 
 | 	struct lpfc_mbx_sge sge; | 
 | 	struct lpfc_mbx_read_fcf_tbl *read_fcf; | 
 | 	uint32_t shdr_status, shdr_add_status, if_type; | 
 | 	union lpfc_sli4_cfg_shdr *shdr; | 
 | 	struct fcf_record *new_fcf_record; | 
 |  | 
 | 	/* Get the first SGE entry from the non-embedded DMA memory. This | 
 | 	 * routine only uses a single SGE. | 
 | 	 */ | 
 | 	lpfc_sli4_mbx_sge_get(mboxq, 0, &sge); | 
 | 	if (unlikely(!mboxq->sge_array)) { | 
 | 		lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, | 
 | 				"2524 Failed to get the non-embedded SGE " | 
 | 				"virtual address\n"); | 
 | 		return NULL; | 
 | 	} | 
 | 	virt_addr = mboxq->sge_array->addr[0]; | 
 |  | 
 | 	shdr = (union lpfc_sli4_cfg_shdr *)virt_addr; | 
 | 	lpfc_sli_pcimem_bcopy(shdr, shdr, | 
 | 			      sizeof(union lpfc_sli4_cfg_shdr)); | 
 | 	shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response); | 
 | 	if_type = bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf); | 
 | 	shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response); | 
 | 	if (shdr_status || shdr_add_status) { | 
 | 		if (shdr_status == STATUS_FCF_TABLE_EMPTY || | 
 | 					if_type == LPFC_SLI_INTF_IF_TYPE_2) | 
 | 			lpfc_printf_log(phba, KERN_ERR, | 
 | 					LOG_TRACE_EVENT, | 
 | 					"2726 READ_FCF_RECORD Indicates empty " | 
 | 					"FCF table.\n"); | 
 | 		else | 
 | 			lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, | 
 | 					"2521 READ_FCF_RECORD mailbox failed " | 
 | 					"with status x%x add_status x%x, " | 
 | 					"mbx\n", shdr_status, shdr_add_status); | 
 | 		return NULL; | 
 | 	} | 
 |  | 
 | 	/* Interpreting the returned information of the FCF record */ | 
 | 	read_fcf = (struct lpfc_mbx_read_fcf_tbl *)virt_addr; | 
 | 	lpfc_sli_pcimem_bcopy(read_fcf, read_fcf, | 
 | 			      sizeof(struct lpfc_mbx_read_fcf_tbl)); | 
 | 	*next_fcf_index = bf_get(lpfc_mbx_read_fcf_tbl_nxt_vindx, read_fcf); | 
 | 	new_fcf_record = (struct fcf_record *)(virt_addr + | 
 | 			  sizeof(struct lpfc_mbx_read_fcf_tbl)); | 
 | 	lpfc_sli_pcimem_bcopy(new_fcf_record, new_fcf_record, | 
 | 				offsetof(struct fcf_record, vlan_bitmap)); | 
 | 	new_fcf_record->word137 = le32_to_cpu(new_fcf_record->word137); | 
 | 	new_fcf_record->word138 = le32_to_cpu(new_fcf_record->word138); | 
 |  | 
 | 	return new_fcf_record; | 
 | } | 
 |  | 
 | /** | 
 |  * lpfc_sli4_log_fcf_record_info - Log the information of a fcf record | 
 |  * @phba: pointer to lpfc hba data structure. | 
 |  * @fcf_record: pointer to the fcf record. | 
 |  * @vlan_id: the lowest vlan identifier associated to this fcf record. | 
 |  * @next_fcf_index: the index to the next fcf record in hba's fcf table. | 
 |  * | 
 |  * This routine logs the detailed FCF record if the LOG_FIP loggin is | 
 |  * enabled. | 
 |  **/ | 
 | static void | 
 | lpfc_sli4_log_fcf_record_info(struct lpfc_hba *phba, | 
 | 			      struct fcf_record *fcf_record, | 
 | 			      uint16_t vlan_id, | 
 | 			      uint16_t next_fcf_index) | 
 | { | 
 | 	lpfc_printf_log(phba, KERN_INFO, LOG_FIP, | 
 | 			"2764 READ_FCF_RECORD:\n" | 
 | 			"\tFCF_Index     : x%x\n" | 
 | 			"\tFCF_Avail     : x%x\n" | 
 | 			"\tFCF_Valid     : x%x\n" | 
 | 			"\tFCF_SOL       : x%x\n" | 
 | 			"\tFIP_Priority  : x%x\n" | 
 | 			"\tMAC_Provider  : x%x\n" | 
 | 			"\tLowest VLANID : x%x\n" | 
 | 			"\tFCF_MAC Addr  : x%x:%x:%x:%x:%x:%x\n" | 
 | 			"\tFabric_Name   : x%x:%x:%x:%x:%x:%x:%x:%x\n" | 
 | 			"\tSwitch_Name   : x%x:%x:%x:%x:%x:%x:%x:%x\n" | 
 | 			"\tNext_FCF_Index: x%x\n", | 
 | 			bf_get(lpfc_fcf_record_fcf_index, fcf_record), | 
 | 			bf_get(lpfc_fcf_record_fcf_avail, fcf_record), | 
 | 			bf_get(lpfc_fcf_record_fcf_valid, fcf_record), | 
 | 			bf_get(lpfc_fcf_record_fcf_sol, fcf_record), | 
 | 			fcf_record->fip_priority, | 
 | 			bf_get(lpfc_fcf_record_mac_addr_prov, fcf_record), | 
 | 			vlan_id, | 
 | 			bf_get(lpfc_fcf_record_mac_0, fcf_record), | 
 | 			bf_get(lpfc_fcf_record_mac_1, fcf_record), | 
 | 			bf_get(lpfc_fcf_record_mac_2, fcf_record), | 
 | 			bf_get(lpfc_fcf_record_mac_3, fcf_record), | 
 | 			bf_get(lpfc_fcf_record_mac_4, fcf_record), | 
 | 			bf_get(lpfc_fcf_record_mac_5, fcf_record), | 
 | 			bf_get(lpfc_fcf_record_fab_name_0, fcf_record), | 
 | 			bf_get(lpfc_fcf_record_fab_name_1, fcf_record), | 
 | 			bf_get(lpfc_fcf_record_fab_name_2, fcf_record), | 
 | 			bf_get(lpfc_fcf_record_fab_name_3, fcf_record), | 
 | 			bf_get(lpfc_fcf_record_fab_name_4, fcf_record), | 
 | 			bf_get(lpfc_fcf_record_fab_name_5, fcf_record), | 
 | 			bf_get(lpfc_fcf_record_fab_name_6, fcf_record), | 
 | 			bf_get(lpfc_fcf_record_fab_name_7, fcf_record), | 
 | 			bf_get(lpfc_fcf_record_switch_name_0, fcf_record), | 
 | 			bf_get(lpfc_fcf_record_switch_name_1, fcf_record), | 
 | 			bf_get(lpfc_fcf_record_switch_name_2, fcf_record), | 
 | 			bf_get(lpfc_fcf_record_switch_name_3, fcf_record), | 
 | 			bf_get(lpfc_fcf_record_switch_name_4, fcf_record), | 
 | 			bf_get(lpfc_fcf_record_switch_name_5, fcf_record), | 
 | 			bf_get(lpfc_fcf_record_switch_name_6, fcf_record), | 
 | 			bf_get(lpfc_fcf_record_switch_name_7, fcf_record), | 
 | 			next_fcf_index); | 
 | } | 
 |  | 
 | /** | 
 |  * lpfc_sli4_fcf_record_match - testing new FCF record for matching existing FCF | 
 |  * @phba: pointer to lpfc hba data structure. | 
 |  * @fcf_rec: pointer to an existing FCF record. | 
 |  * @new_fcf_record: pointer to a new FCF record. | 
 |  * @new_vlan_id: vlan id from the new FCF record. | 
 |  * | 
 |  * This function performs matching test of a new FCF record against an existing | 
 |  * FCF record. If the new_vlan_id passed in is LPFC_FCOE_IGNORE_VID, vlan id | 
 |  * will not be used as part of the FCF record matching criteria. | 
 |  * | 
 |  * Returns true if all the fields matching, otherwise returns false. | 
 |  */ | 
 | static bool | 
 | lpfc_sli4_fcf_record_match(struct lpfc_hba *phba, | 
 | 			   struct lpfc_fcf_rec *fcf_rec, | 
 | 			   struct fcf_record *new_fcf_record, | 
 | 			   uint16_t new_vlan_id) | 
 | { | 
 | 	if (new_vlan_id != LPFC_FCOE_IGNORE_VID) | 
 | 		if (!lpfc_vlan_id_match(fcf_rec->vlan_id, new_vlan_id)) | 
 | 			return false; | 
 | 	if (!lpfc_mac_addr_match(fcf_rec->mac_addr, new_fcf_record)) | 
 | 		return false; | 
 | 	if (!lpfc_sw_name_match(fcf_rec->switch_name, new_fcf_record)) | 
 | 		return false; | 
 | 	if (!lpfc_fab_name_match(fcf_rec->fabric_name, new_fcf_record)) | 
 | 		return false; | 
 | 	if (fcf_rec->priority != new_fcf_record->fip_priority) | 
 | 		return false; | 
 | 	return true; | 
 | } | 
 |  | 
 | /** | 
 |  * lpfc_sli4_fcf_rr_next_proc - processing next roundrobin fcf | 
 |  * @vport: Pointer to vport object. | 
 |  * @fcf_index: index to next fcf. | 
 |  * | 
 |  * This function processing the roundrobin fcf failover to next fcf index. | 
 |  * When this function is invoked, there will be a current fcf registered | 
 |  * for flogi. | 
 |  * Return: 0 for continue retrying flogi on currently registered fcf; | 
 |  *         1 for stop flogi on currently registered fcf; | 
 |  */ | 
 | int lpfc_sli4_fcf_rr_next_proc(struct lpfc_vport *vport, uint16_t fcf_index) | 
 | { | 
 | 	struct lpfc_hba *phba = vport->phba; | 
 | 	int rc; | 
 |  | 
 | 	if (fcf_index == LPFC_FCOE_FCF_NEXT_NONE) { | 
 | 		if (test_bit(HBA_DEVLOSS_TMO, &phba->hba_flag)) { | 
 | 			lpfc_printf_log(phba, KERN_INFO, LOG_FIP, | 
 | 					"2872 Devloss tmo with no eligible " | 
 | 					"FCF, unregister in-use FCF (x%x) " | 
 | 					"and rescan FCF table\n", | 
 | 					phba->fcf.current_rec.fcf_indx); | 
 | 			lpfc_unregister_fcf_rescan(phba); | 
 | 			goto stop_flogi_current_fcf; | 
 | 		} | 
 | 		/* Mark the end to FLOGI roundrobin failover */ | 
 | 		clear_bit(FCF_RR_INPROG, &phba->hba_flag); | 
 | 		/* Allow action to new fcf asynchronous event */ | 
 | 		spin_lock_irq(&phba->hbalock); | 
 | 		phba->fcf.fcf_flag &= ~(FCF_AVAILABLE | FCF_SCAN_DONE); | 
 | 		spin_unlock_irq(&phba->hbalock); | 
 | 		lpfc_printf_log(phba, KERN_INFO, LOG_FIP, | 
 | 				"2865 No FCF available, stop roundrobin FCF " | 
 | 				"failover and change port state:x%x/x%x\n", | 
 | 				phba->pport->port_state, LPFC_VPORT_UNKNOWN); | 
 | 		phba->pport->port_state = LPFC_VPORT_UNKNOWN; | 
 |  | 
 | 		if (!phba->fcf.fcf_redisc_attempted) { | 
 | 			lpfc_unregister_fcf(phba); | 
 |  | 
 | 			rc = lpfc_sli4_redisc_fcf_table(phba); | 
 | 			if (!rc) { | 
 | 				lpfc_printf_log(phba, KERN_INFO, LOG_FIP, | 
 | 						"3195 Rediscover FCF table\n"); | 
 | 				phba->fcf.fcf_redisc_attempted = 1; | 
 | 				lpfc_sli4_clear_fcf_rr_bmask(phba); | 
 | 			} else { | 
 | 				lpfc_printf_log(phba, KERN_WARNING, LOG_FIP, | 
 | 						"3196 Rediscover FCF table " | 
 | 						"failed. Status:x%x\n", rc); | 
 | 			} | 
 | 		} else { | 
 | 			lpfc_printf_log(phba, KERN_WARNING, LOG_FIP, | 
 | 					"3197 Already rediscover FCF table " | 
 | 					"attempted. No more retry\n"); | 
 | 		} | 
 | 		goto stop_flogi_current_fcf; | 
 | 	} else { | 
 | 		lpfc_printf_log(phba, KERN_INFO, LOG_FIP | LOG_ELS, | 
 | 				"2794 Try FLOGI roundrobin FCF failover to " | 
 | 				"(x%x)\n", fcf_index); | 
 | 		rc = lpfc_sli4_fcf_rr_read_fcf_rec(phba, fcf_index); | 
 | 		if (rc) | 
 | 			lpfc_printf_log(phba, KERN_WARNING, LOG_FIP | LOG_ELS, | 
 | 					"2761 FLOGI roundrobin FCF failover " | 
 | 					"failed (rc:x%x) to read FCF (x%x)\n", | 
 | 					rc, phba->fcf.current_rec.fcf_indx); | 
 | 		else | 
 | 			goto stop_flogi_current_fcf; | 
 | 	} | 
 | 	return 0; | 
 |  | 
 | stop_flogi_current_fcf: | 
 | 	lpfc_can_disctmo(vport); | 
 | 	return 1; | 
 | } | 
 |  | 
 | /** | 
 |  * lpfc_sli4_fcf_pri_list_del | 
 |  * @phba: pointer to lpfc hba data structure. | 
 |  * @fcf_index: the index of the fcf record to delete | 
 |  * This routine checks the on list flag of the fcf_index to be deleted. | 
 |  * If it is one the list then it is removed from the list, and the flag | 
 |  * is cleared. This routine grab the hbalock before removing the fcf | 
 |  * record from the list. | 
 |  **/ | 
 | static void lpfc_sli4_fcf_pri_list_del(struct lpfc_hba *phba, | 
 | 			uint16_t fcf_index) | 
 | { | 
 | 	struct lpfc_fcf_pri *new_fcf_pri; | 
 |  | 
 | 	new_fcf_pri = &phba->fcf.fcf_pri[fcf_index]; | 
 | 	lpfc_printf_log(phba, KERN_INFO, LOG_FIP, | 
 | 		"3058 deleting idx x%x pri x%x flg x%x\n", | 
 | 		fcf_index, new_fcf_pri->fcf_rec.priority, | 
 | 		 new_fcf_pri->fcf_rec.flag); | 
 | 	spin_lock_irq(&phba->hbalock); | 
 | 	if (new_fcf_pri->fcf_rec.flag & LPFC_FCF_ON_PRI_LIST) { | 
 | 		if (phba->fcf.current_rec.priority == | 
 | 				new_fcf_pri->fcf_rec.priority) | 
 | 			phba->fcf.eligible_fcf_cnt--; | 
 | 		list_del_init(&new_fcf_pri->list); | 
 | 		new_fcf_pri->fcf_rec.flag &= ~LPFC_FCF_ON_PRI_LIST; | 
 | 	} | 
 | 	spin_unlock_irq(&phba->hbalock); | 
 | } | 
 |  | 
 | /** | 
 |  * lpfc_sli4_set_fcf_flogi_fail | 
 |  * @phba: pointer to lpfc hba data structure. | 
 |  * @fcf_index: the index of the fcf record to update | 
 |  * This routine acquires the hbalock and then set the LPFC_FCF_FLOGI_FAILED | 
 |  * flag so the round robin selection for the particular priority level | 
 |  * will try a different fcf record that does not have this bit set. | 
 |  * If the fcf record is re-read for any reason this flag is cleared brfore | 
 |  * adding it to the priority list. | 
 |  **/ | 
 | void | 
 | lpfc_sli4_set_fcf_flogi_fail(struct lpfc_hba *phba, uint16_t fcf_index) | 
 | { | 
 | 	struct lpfc_fcf_pri *new_fcf_pri; | 
 | 	new_fcf_pri = &phba->fcf.fcf_pri[fcf_index]; | 
 | 	spin_lock_irq(&phba->hbalock); | 
 | 	new_fcf_pri->fcf_rec.flag |= LPFC_FCF_FLOGI_FAILED; | 
 | 	spin_unlock_irq(&phba->hbalock); | 
 | } | 
 |  | 
 | /** | 
 |  * lpfc_sli4_fcf_pri_list_add | 
 |  * @phba: pointer to lpfc hba data structure. | 
 |  * @fcf_index: the index of the fcf record to add | 
 |  * @new_fcf_record: pointer to a new FCF record. | 
 |  * This routine checks the priority of the fcf_index to be added. | 
 |  * If it is a lower priority than the current head of the fcf_pri list | 
 |  * then it is added to the list in the right order. | 
 |  * If it is the same priority as the current head of the list then it | 
 |  * is added to the head of the list and its bit in the rr_bmask is set. | 
 |  * If the fcf_index to be added is of a higher priority than the current | 
 |  * head of the list then the rr_bmask is cleared, its bit is set in the | 
 |  * rr_bmask and it is added to the head of the list. | 
 |  * returns: | 
 |  * 0=success 1=failure | 
 |  **/ | 
 | static int lpfc_sli4_fcf_pri_list_add(struct lpfc_hba *phba, | 
 | 	uint16_t fcf_index, | 
 | 	struct fcf_record *new_fcf_record) | 
 | { | 
 | 	uint16_t current_fcf_pri; | 
 | 	uint16_t last_index; | 
 | 	struct lpfc_fcf_pri *fcf_pri; | 
 | 	struct lpfc_fcf_pri *next_fcf_pri; | 
 | 	struct lpfc_fcf_pri *new_fcf_pri; | 
 | 	int ret; | 
 |  | 
 | 	new_fcf_pri = &phba->fcf.fcf_pri[fcf_index]; | 
 | 	lpfc_printf_log(phba, KERN_INFO, LOG_FIP, | 
 | 		"3059 adding idx x%x pri x%x flg x%x\n", | 
 | 		fcf_index, new_fcf_record->fip_priority, | 
 | 		 new_fcf_pri->fcf_rec.flag); | 
 | 	spin_lock_irq(&phba->hbalock); | 
 | 	if (new_fcf_pri->fcf_rec.flag & LPFC_FCF_ON_PRI_LIST) | 
 | 		list_del_init(&new_fcf_pri->list); | 
 | 	new_fcf_pri->fcf_rec.fcf_index = fcf_index; | 
 | 	new_fcf_pri->fcf_rec.priority = new_fcf_record->fip_priority; | 
 | 	if (list_empty(&phba->fcf.fcf_pri_list)) { | 
 | 		list_add(&new_fcf_pri->list, &phba->fcf.fcf_pri_list); | 
 | 		ret = lpfc_sli4_fcf_rr_index_set(phba, | 
 | 				new_fcf_pri->fcf_rec.fcf_index); | 
 | 		goto out; | 
 | 	} | 
 |  | 
 | 	last_index = find_first_bit(phba->fcf.fcf_rr_bmask, | 
 | 				LPFC_SLI4_FCF_TBL_INDX_MAX); | 
 | 	if (last_index >= LPFC_SLI4_FCF_TBL_INDX_MAX) { | 
 | 		ret = 0; /* Empty rr list */ | 
 | 		goto out; | 
 | 	} | 
 | 	current_fcf_pri = phba->fcf.fcf_pri[last_index].fcf_rec.priority; | 
 | 	if (new_fcf_pri->fcf_rec.priority <=  current_fcf_pri) { | 
 | 		list_add(&new_fcf_pri->list, &phba->fcf.fcf_pri_list); | 
 | 		if (new_fcf_pri->fcf_rec.priority <  current_fcf_pri) { | 
 | 			memset(phba->fcf.fcf_rr_bmask, 0, | 
 | 				sizeof(*phba->fcf.fcf_rr_bmask)); | 
 | 			/* fcfs_at_this_priority_level = 1; */ | 
 | 			phba->fcf.eligible_fcf_cnt = 1; | 
 | 		} else | 
 | 			/* fcfs_at_this_priority_level++; */ | 
 | 			phba->fcf.eligible_fcf_cnt++; | 
 | 		ret = lpfc_sli4_fcf_rr_index_set(phba, | 
 | 				new_fcf_pri->fcf_rec.fcf_index); | 
 | 		goto out; | 
 | 	} | 
 |  | 
 | 	list_for_each_entry_safe(fcf_pri, next_fcf_pri, | 
 | 				&phba->fcf.fcf_pri_list, list) { | 
 | 		if (new_fcf_pri->fcf_rec.priority <= | 
 | 				fcf_pri->fcf_rec.priority) { | 
 | 			if (fcf_pri->list.prev == &phba->fcf.fcf_pri_list) | 
 | 				list_add(&new_fcf_pri->list, | 
 | 						&phba->fcf.fcf_pri_list); | 
 | 			else | 
 | 				list_add(&new_fcf_pri->list, | 
 | 					 &((struct lpfc_fcf_pri *) | 
 | 					fcf_pri->list.prev)->list); | 
 | 			ret = 0; | 
 | 			goto out; | 
 | 		} else if (fcf_pri->list.next == &phba->fcf.fcf_pri_list | 
 | 			|| new_fcf_pri->fcf_rec.priority < | 
 | 				next_fcf_pri->fcf_rec.priority) { | 
 | 			list_add(&new_fcf_pri->list, &fcf_pri->list); | 
 | 			ret = 0; | 
 | 			goto out; | 
 | 		} | 
 | 		if (new_fcf_pri->fcf_rec.priority > fcf_pri->fcf_rec.priority) | 
 | 			continue; | 
 |  | 
 | 	} | 
 | 	ret = 1; | 
 | out: | 
 | 	/* we use = instead of |= to clear the FLOGI_FAILED flag. */ | 
 | 	new_fcf_pri->fcf_rec.flag = LPFC_FCF_ON_PRI_LIST; | 
 | 	spin_unlock_irq(&phba->hbalock); | 
 | 	return ret; | 
 | } | 
 |  | 
 | /** | 
 |  * lpfc_mbx_cmpl_fcf_scan_read_fcf_rec - fcf scan read_fcf mbox cmpl handler. | 
 |  * @phba: pointer to lpfc hba data structure. | 
 |  * @mboxq: pointer to mailbox object. | 
 |  * | 
 |  * This function iterates through all the fcf records available in | 
 |  * HBA and chooses the optimal FCF record for discovery. After finding | 
 |  * the FCF for discovery it registers the FCF record and kicks start | 
 |  * discovery. | 
 |  * If FCF_IN_USE flag is set in currently used FCF, the routine tries to | 
 |  * use an FCF record which matches fabric name and mac address of the | 
 |  * currently used FCF record. | 
 |  * If the driver supports only one FCF, it will try to use the FCF record | 
 |  * used by BOOT_BIOS. | 
 |  */ | 
 | void | 
 | lpfc_mbx_cmpl_fcf_scan_read_fcf_rec(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq) | 
 | { | 
 | 	struct fcf_record *new_fcf_record; | 
 | 	uint32_t boot_flag, addr_mode; | 
 | 	uint16_t fcf_index, next_fcf_index; | 
 | 	struct lpfc_fcf_rec *fcf_rec = NULL; | 
 | 	uint16_t vlan_id = LPFC_FCOE_NULL_VID; | 
 | 	bool select_new_fcf; | 
 | 	int rc; | 
 |  | 
 | 	/* If there is pending FCoE event restart FCF table scan */ | 
 | 	if (lpfc_check_pending_fcoe_event(phba, LPFC_SKIP_UNREG_FCF)) { | 
 | 		lpfc_sli4_mbox_cmd_free(phba, mboxq); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	/* Parse the FCF record from the non-embedded mailbox command */ | 
 | 	new_fcf_record = lpfc_sli4_fcf_rec_mbox_parse(phba, mboxq, | 
 | 						      &next_fcf_index); | 
 | 	if (!new_fcf_record) { | 
 | 		lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, | 
 | 				"2765 Mailbox command READ_FCF_RECORD " | 
 | 				"failed to retrieve a FCF record.\n"); | 
 | 		/* Let next new FCF event trigger fast failover */ | 
 | 		clear_bit(FCF_TS_INPROG, &phba->hba_flag); | 
 | 		lpfc_sli4_mbox_cmd_free(phba, mboxq); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	/* Check the FCF record against the connection list */ | 
 | 	rc = lpfc_match_fcf_conn_list(phba, new_fcf_record, &boot_flag, | 
 | 				      &addr_mode, &vlan_id); | 
 |  | 
 | 	/* Log the FCF record information if turned on */ | 
 | 	lpfc_sli4_log_fcf_record_info(phba, new_fcf_record, vlan_id, | 
 | 				      next_fcf_index); | 
 |  | 
 | 	/* | 
 | 	 * If the fcf record does not match with connect list entries | 
 | 	 * read the next entry; otherwise, this is an eligible FCF | 
 | 	 * record for roundrobin FCF failover. | 
 | 	 */ | 
 | 	if (!rc) { | 
 | 		lpfc_sli4_fcf_pri_list_del(phba, | 
 | 					bf_get(lpfc_fcf_record_fcf_index, | 
 | 					       new_fcf_record)); | 
 | 		lpfc_printf_log(phba, KERN_WARNING, LOG_FIP, | 
 | 				"2781 FCF (x%x) failed connection " | 
 | 				"list check: (x%x/x%x/%x)\n", | 
 | 				bf_get(lpfc_fcf_record_fcf_index, | 
 | 				       new_fcf_record), | 
 | 				bf_get(lpfc_fcf_record_fcf_avail, | 
 | 				       new_fcf_record), | 
 | 				bf_get(lpfc_fcf_record_fcf_valid, | 
 | 				       new_fcf_record), | 
 | 				bf_get(lpfc_fcf_record_fcf_sol, | 
 | 				       new_fcf_record)); | 
 | 		if ((phba->fcf.fcf_flag & FCF_IN_USE) && | 
 | 		    lpfc_sli4_fcf_record_match(phba, &phba->fcf.current_rec, | 
 | 		    new_fcf_record, LPFC_FCOE_IGNORE_VID)) { | 
 | 			if (bf_get(lpfc_fcf_record_fcf_index, new_fcf_record) != | 
 | 			    phba->fcf.current_rec.fcf_indx) { | 
 | 				lpfc_printf_log(phba, KERN_ERR, | 
 | 						LOG_TRACE_EVENT, | 
 | 					"2862 FCF (x%x) matches property " | 
 | 					"of in-use FCF (x%x)\n", | 
 | 					bf_get(lpfc_fcf_record_fcf_index, | 
 | 					       new_fcf_record), | 
 | 					phba->fcf.current_rec.fcf_indx); | 
 | 				goto read_next_fcf; | 
 | 			} | 
 | 			/* | 
 | 			 * In case the current in-use FCF record becomes | 
 | 			 * invalid/unavailable during FCF discovery that | 
 | 			 * was not triggered by fast FCF failover process, | 
 | 			 * treat it as fast FCF failover. | 
 | 			 */ | 
 | 			if (!(phba->fcf.fcf_flag & FCF_REDISC_PEND) && | 
 | 			    !(phba->fcf.fcf_flag & FCF_REDISC_FOV)) { | 
 | 				lpfc_printf_log(phba, KERN_WARNING, LOG_FIP, | 
 | 						"2835 Invalid in-use FCF " | 
 | 						"(x%x), enter FCF failover " | 
 | 						"table scan.\n", | 
 | 						phba->fcf.current_rec.fcf_indx); | 
 | 				spin_lock_irq(&phba->hbalock); | 
 | 				phba->fcf.fcf_flag |= FCF_REDISC_FOV; | 
 | 				spin_unlock_irq(&phba->hbalock); | 
 | 				lpfc_sli4_mbox_cmd_free(phba, mboxq); | 
 | 				lpfc_sli4_fcf_scan_read_fcf_rec(phba, | 
 | 						LPFC_FCOE_FCF_GET_FIRST); | 
 | 				return; | 
 | 			} | 
 | 		} | 
 | 		goto read_next_fcf; | 
 | 	} else { | 
 | 		fcf_index = bf_get(lpfc_fcf_record_fcf_index, new_fcf_record); | 
 | 		rc = lpfc_sli4_fcf_pri_list_add(phba, fcf_index, | 
 | 							new_fcf_record); | 
 | 		if (rc) | 
 | 			goto read_next_fcf; | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * If this is not the first FCF discovery of the HBA, use last | 
 | 	 * FCF record for the discovery. The condition that a rescan | 
 | 	 * matches the in-use FCF record: fabric name, switch name, mac | 
 | 	 * address, and vlan_id. | 
 | 	 */ | 
 | 	spin_lock_irq(&phba->hbalock); | 
 | 	if (phba->fcf.fcf_flag & FCF_IN_USE) { | 
 | 		if (phba->cfg_fcf_failover_policy == LPFC_FCF_FOV && | 
 | 			lpfc_sli4_fcf_record_match(phba, &phba->fcf.current_rec, | 
 | 		    new_fcf_record, vlan_id)) { | 
 | 			if (bf_get(lpfc_fcf_record_fcf_index, new_fcf_record) == | 
 | 			    phba->fcf.current_rec.fcf_indx) { | 
 | 				phba->fcf.fcf_flag |= FCF_AVAILABLE; | 
 | 				if (phba->fcf.fcf_flag & FCF_REDISC_PEND) | 
 | 					/* Stop FCF redisc wait timer */ | 
 | 					__lpfc_sli4_stop_fcf_redisc_wait_timer( | 
 | 									phba); | 
 | 				else if (phba->fcf.fcf_flag & FCF_REDISC_FOV) | 
 | 					/* Fast failover, mark completed */ | 
 | 					phba->fcf.fcf_flag &= ~FCF_REDISC_FOV; | 
 | 				spin_unlock_irq(&phba->hbalock); | 
 | 				lpfc_printf_log(phba, KERN_INFO, LOG_FIP, | 
 | 						"2836 New FCF matches in-use " | 
 | 						"FCF (x%x), port_state:x%x, " | 
 | 						"fc_flag:x%lx\n", | 
 | 						phba->fcf.current_rec.fcf_indx, | 
 | 						phba->pport->port_state, | 
 | 						phba->pport->fc_flag); | 
 | 				goto out; | 
 | 			} else | 
 | 				lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, | 
 | 					"2863 New FCF (x%x) matches " | 
 | 					"property of in-use FCF (x%x)\n", | 
 | 					bf_get(lpfc_fcf_record_fcf_index, | 
 | 					       new_fcf_record), | 
 | 					phba->fcf.current_rec.fcf_indx); | 
 | 		} | 
 | 		/* | 
 | 		 * Read next FCF record from HBA searching for the matching | 
 | 		 * with in-use record only if not during the fast failover | 
 | 		 * period. In case of fast failover period, it shall try to | 
 | 		 * determine whether the FCF record just read should be the | 
 | 		 * next candidate. | 
 | 		 */ | 
 | 		if (!(phba->fcf.fcf_flag & FCF_REDISC_FOV)) { | 
 | 			spin_unlock_irq(&phba->hbalock); | 
 | 			goto read_next_fcf; | 
 | 		} | 
 | 	} | 
 | 	/* | 
 | 	 * Update on failover FCF record only if it's in FCF fast-failover | 
 | 	 * period; otherwise, update on current FCF record. | 
 | 	 */ | 
 | 	if (phba->fcf.fcf_flag & FCF_REDISC_FOV) | 
 | 		fcf_rec = &phba->fcf.failover_rec; | 
 | 	else | 
 | 		fcf_rec = &phba->fcf.current_rec; | 
 |  | 
 | 	if (phba->fcf.fcf_flag & FCF_AVAILABLE) { | 
 | 		/* | 
 | 		 * If the driver FCF record does not have boot flag | 
 | 		 * set and new hba fcf record has boot flag set, use | 
 | 		 * the new hba fcf record. | 
 | 		 */ | 
 | 		if (boot_flag && !(fcf_rec->flag & BOOT_ENABLE)) { | 
 | 			/* Choose this FCF record */ | 
 | 			lpfc_printf_log(phba, KERN_INFO, LOG_FIP, | 
 | 					"2837 Update current FCF record " | 
 | 					"(x%x) with new FCF record (x%x)\n", | 
 | 					fcf_rec->fcf_indx, | 
 | 					bf_get(lpfc_fcf_record_fcf_index, | 
 | 					new_fcf_record)); | 
 | 			__lpfc_update_fcf_record(phba, fcf_rec, new_fcf_record, | 
 | 					addr_mode, vlan_id, BOOT_ENABLE); | 
 | 			spin_unlock_irq(&phba->hbalock); | 
 | 			goto read_next_fcf; | 
 | 		} | 
 | 		/* | 
 | 		 * If the driver FCF record has boot flag set and the | 
 | 		 * new hba FCF record does not have boot flag, read | 
 | 		 * the next FCF record. | 
 | 		 */ | 
 | 		if (!boot_flag && (fcf_rec->flag & BOOT_ENABLE)) { | 
 | 			spin_unlock_irq(&phba->hbalock); | 
 | 			goto read_next_fcf; | 
 | 		} | 
 | 		/* | 
 | 		 * If the new hba FCF record has lower priority value | 
 | 		 * than the driver FCF record, use the new record. | 
 | 		 */ | 
 | 		if (new_fcf_record->fip_priority < fcf_rec->priority) { | 
 | 			/* Choose the new FCF record with lower priority */ | 
 | 			lpfc_printf_log(phba, KERN_INFO, LOG_FIP, | 
 | 					"2838 Update current FCF record " | 
 | 					"(x%x) with new FCF record (x%x)\n", | 
 | 					fcf_rec->fcf_indx, | 
 | 					bf_get(lpfc_fcf_record_fcf_index, | 
 | 					       new_fcf_record)); | 
 | 			__lpfc_update_fcf_record(phba, fcf_rec, new_fcf_record, | 
 | 					addr_mode, vlan_id, 0); | 
 | 			/* Reset running random FCF selection count */ | 
 | 			phba->fcf.eligible_fcf_cnt = 1; | 
 | 		} else if (new_fcf_record->fip_priority == fcf_rec->priority) { | 
 | 			/* Update running random FCF selection count */ | 
 | 			phba->fcf.eligible_fcf_cnt++; | 
 | 			select_new_fcf = lpfc_sli4_new_fcf_random_select(phba, | 
 | 						phba->fcf.eligible_fcf_cnt); | 
 | 			if (select_new_fcf) { | 
 | 				lpfc_printf_log(phba, KERN_INFO, LOG_FIP, | 
 | 					"2839 Update current FCF record " | 
 | 					"(x%x) with new FCF record (x%x)\n", | 
 | 					fcf_rec->fcf_indx, | 
 | 					bf_get(lpfc_fcf_record_fcf_index, | 
 | 					       new_fcf_record)); | 
 | 				/* Choose the new FCF by random selection */ | 
 | 				__lpfc_update_fcf_record(phba, fcf_rec, | 
 | 							 new_fcf_record, | 
 | 							 addr_mode, vlan_id, 0); | 
 | 			} | 
 | 		} | 
 | 		spin_unlock_irq(&phba->hbalock); | 
 | 		goto read_next_fcf; | 
 | 	} | 
 | 	/* | 
 | 	 * This is the first suitable FCF record, choose this record for | 
 | 	 * initial best-fit FCF. | 
 | 	 */ | 
 | 	if (fcf_rec) { | 
 | 		lpfc_printf_log(phba, KERN_INFO, LOG_FIP, | 
 | 				"2840 Update initial FCF candidate " | 
 | 				"with FCF (x%x)\n", | 
 | 				bf_get(lpfc_fcf_record_fcf_index, | 
 | 				       new_fcf_record)); | 
 | 		__lpfc_update_fcf_record(phba, fcf_rec, new_fcf_record, | 
 | 					 addr_mode, vlan_id, (boot_flag ? | 
 | 					 BOOT_ENABLE : 0)); | 
 | 		phba->fcf.fcf_flag |= FCF_AVAILABLE; | 
 | 		/* Setup initial running random FCF selection count */ | 
 | 		phba->fcf.eligible_fcf_cnt = 1; | 
 | 	} | 
 | 	spin_unlock_irq(&phba->hbalock); | 
 | 	goto read_next_fcf; | 
 |  | 
 | read_next_fcf: | 
 | 	lpfc_sli4_mbox_cmd_free(phba, mboxq); | 
 | 	if (next_fcf_index == LPFC_FCOE_FCF_NEXT_NONE || next_fcf_index == 0) { | 
 | 		if (phba->fcf.fcf_flag & FCF_REDISC_FOV) { | 
 | 			/* | 
 | 			 * Case of FCF fast failover scan | 
 | 			 */ | 
 |  | 
 | 			/* | 
 | 			 * It has not found any suitable FCF record, cancel | 
 | 			 * FCF scan inprogress, and do nothing | 
 | 			 */ | 
 | 			if (!(phba->fcf.failover_rec.flag & RECORD_VALID)) { | 
 | 				lpfc_printf_log(phba, KERN_WARNING, LOG_FIP, | 
 | 					       "2782 No suitable FCF found: " | 
 | 					       "(x%x/x%x)\n", | 
 | 					       phba->fcoe_eventtag_at_fcf_scan, | 
 | 					       bf_get(lpfc_fcf_record_fcf_index, | 
 | 						      new_fcf_record)); | 
 | 				if (test_bit(HBA_DEVLOSS_TMO, | 
 | 					     &phba->hba_flag)) { | 
 | 					clear_bit(FCF_TS_INPROG, | 
 | 						  &phba->hba_flag); | 
 | 					/* Unregister in-use FCF and rescan */ | 
 | 					lpfc_printf_log(phba, KERN_INFO, | 
 | 							LOG_FIP, | 
 | 							"2864 On devloss tmo " | 
 | 							"unreg in-use FCF and " | 
 | 							"rescan FCF table\n"); | 
 | 					lpfc_unregister_fcf_rescan(phba); | 
 | 					return; | 
 | 				} | 
 | 				/* | 
 | 				 * Let next new FCF event trigger fast failover | 
 | 				 */ | 
 | 				clear_bit(FCF_TS_INPROG, &phba->hba_flag); | 
 | 				return; | 
 | 			} | 
 | 			/* | 
 | 			 * It has found a suitable FCF record that is not | 
 | 			 * the same as in-use FCF record, unregister the | 
 | 			 * in-use FCF record, replace the in-use FCF record | 
 | 			 * with the new FCF record, mark FCF fast failover | 
 | 			 * completed, and then start register the new FCF | 
 | 			 * record. | 
 | 			 */ | 
 |  | 
 | 			/* Unregister the current in-use FCF record */ | 
 | 			lpfc_unregister_fcf(phba); | 
 |  | 
 | 			/* Replace in-use record with the new record */ | 
 | 			lpfc_printf_log(phba, KERN_INFO, LOG_FIP, | 
 | 					"2842 Replace in-use FCF (x%x) " | 
 | 					"with failover FCF (x%x)\n", | 
 | 					phba->fcf.current_rec.fcf_indx, | 
 | 					phba->fcf.failover_rec.fcf_indx); | 
 | 			memcpy(&phba->fcf.current_rec, | 
 | 			       &phba->fcf.failover_rec, | 
 | 			       sizeof(struct lpfc_fcf_rec)); | 
 | 			/* | 
 | 			 * Mark the fast FCF failover rediscovery completed | 
 | 			 * and the start of the first round of the roundrobin | 
 | 			 * FCF failover. | 
 | 			 */ | 
 | 			spin_lock_irq(&phba->hbalock); | 
 | 			phba->fcf.fcf_flag &= ~FCF_REDISC_FOV; | 
 | 			spin_unlock_irq(&phba->hbalock); | 
 | 			/* Register to the new FCF record */ | 
 | 			lpfc_register_fcf(phba); | 
 | 		} else { | 
 | 			/* | 
 | 			 * In case of transaction period to fast FCF failover, | 
 | 			 * do nothing when search to the end of the FCF table. | 
 | 			 */ | 
 | 			if ((phba->fcf.fcf_flag & FCF_REDISC_EVT) || | 
 | 			    (phba->fcf.fcf_flag & FCF_REDISC_PEND)) | 
 | 				return; | 
 |  | 
 | 			if (phba->cfg_fcf_failover_policy == LPFC_FCF_FOV && | 
 | 				phba->fcf.fcf_flag & FCF_IN_USE) { | 
 | 				/* | 
 | 				 * In case the current in-use FCF record no | 
 | 				 * longer existed during FCF discovery that | 
 | 				 * was not triggered by fast FCF failover | 
 | 				 * process, treat it as fast FCF failover. | 
 | 				 */ | 
 | 				lpfc_printf_log(phba, KERN_INFO, LOG_FIP, | 
 | 						"2841 In-use FCF record (x%x) " | 
 | 						"not reported, entering fast " | 
 | 						"FCF failover mode scanning.\n", | 
 | 						phba->fcf.current_rec.fcf_indx); | 
 | 				spin_lock_irq(&phba->hbalock); | 
 | 				phba->fcf.fcf_flag |= FCF_REDISC_FOV; | 
 | 				spin_unlock_irq(&phba->hbalock); | 
 | 				lpfc_sli4_fcf_scan_read_fcf_rec(phba, | 
 | 						LPFC_FCOE_FCF_GET_FIRST); | 
 | 				return; | 
 | 			} | 
 | 			/* Register to the new FCF record */ | 
 | 			lpfc_register_fcf(phba); | 
 | 		} | 
 | 	} else | 
 | 		lpfc_sli4_fcf_scan_read_fcf_rec(phba, next_fcf_index); | 
 | 	return; | 
 |  | 
 | out: | 
 | 	lpfc_sli4_mbox_cmd_free(phba, mboxq); | 
 | 	lpfc_register_fcf(phba); | 
 |  | 
 | 	return; | 
 | } | 
 |  | 
 | /** | 
 |  * lpfc_mbx_cmpl_fcf_rr_read_fcf_rec - fcf roundrobin read_fcf mbox cmpl hdler | 
 |  * @phba: pointer to lpfc hba data structure. | 
 |  * @mboxq: pointer to mailbox object. | 
 |  * | 
 |  * This is the callback function for FLOGI failure roundrobin FCF failover | 
 |  * read FCF record mailbox command from the eligible FCF record bmask for | 
 |  * performing the failover. If the FCF read back is not valid/available, it | 
 |  * fails through to retrying FLOGI to the currently registered FCF again. | 
 |  * Otherwise, if the FCF read back is valid and available, it will set the | 
 |  * newly read FCF record to the failover FCF record, unregister currently | 
 |  * registered FCF record, copy the failover FCF record to the current | 
 |  * FCF record, and then register the current FCF record before proceeding | 
 |  * to trying FLOGI on the new failover FCF. | 
 |  */ | 
 | void | 
 | lpfc_mbx_cmpl_fcf_rr_read_fcf_rec(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq) | 
 | { | 
 | 	struct fcf_record *new_fcf_record; | 
 | 	uint32_t boot_flag, addr_mode; | 
 | 	uint16_t next_fcf_index, fcf_index; | 
 | 	uint16_t current_fcf_index; | 
 | 	uint16_t vlan_id = LPFC_FCOE_NULL_VID; | 
 | 	int rc; | 
 |  | 
 | 	/* If link state is not up, stop the roundrobin failover process */ | 
 | 	if (phba->link_state < LPFC_LINK_UP) { | 
 | 		spin_lock_irq(&phba->hbalock); | 
 | 		phba->fcf.fcf_flag &= ~FCF_DISCOVERY; | 
 | 		spin_unlock_irq(&phba->hbalock); | 
 | 		clear_bit(FCF_RR_INPROG, &phba->hba_flag); | 
 | 		goto out; | 
 | 	} | 
 |  | 
 | 	/* Parse the FCF record from the non-embedded mailbox command */ | 
 | 	new_fcf_record = lpfc_sli4_fcf_rec_mbox_parse(phba, mboxq, | 
 | 						      &next_fcf_index); | 
 | 	if (!new_fcf_record) { | 
 | 		lpfc_printf_log(phba, KERN_WARNING, LOG_FIP, | 
 | 				"2766 Mailbox command READ_FCF_RECORD " | 
 | 				"failed to retrieve a FCF record. " | 
 | 				"hba_flg x%lx fcf_flg x%x\n", phba->hba_flag, | 
 | 				phba->fcf.fcf_flag); | 
 | 		lpfc_unregister_fcf_rescan(phba); | 
 | 		goto out; | 
 | 	} | 
 |  | 
 | 	/* Get the needed parameters from FCF record */ | 
 | 	rc = lpfc_match_fcf_conn_list(phba, new_fcf_record, &boot_flag, | 
 | 				      &addr_mode, &vlan_id); | 
 |  | 
 | 	/* Log the FCF record information if turned on */ | 
 | 	lpfc_sli4_log_fcf_record_info(phba, new_fcf_record, vlan_id, | 
 | 				      next_fcf_index); | 
 |  | 
 | 	fcf_index = bf_get(lpfc_fcf_record_fcf_index, new_fcf_record); | 
 | 	if (!rc) { | 
 | 		lpfc_printf_log(phba, KERN_INFO, LOG_FIP, | 
 | 				"2848 Remove ineligible FCF (x%x) from " | 
 | 				"from roundrobin bmask\n", fcf_index); | 
 | 		/* Clear roundrobin bmask bit for ineligible FCF */ | 
 | 		lpfc_sli4_fcf_rr_index_clear(phba, fcf_index); | 
 | 		/* Perform next round of roundrobin FCF failover */ | 
 | 		fcf_index = lpfc_sli4_fcf_rr_next_index_get(phba); | 
 | 		rc = lpfc_sli4_fcf_rr_next_proc(phba->pport, fcf_index); | 
 | 		if (rc) | 
 | 			goto out; | 
 | 		goto error_out; | 
 | 	} | 
 |  | 
 | 	if (fcf_index == phba->fcf.current_rec.fcf_indx) { | 
 | 		lpfc_printf_log(phba, KERN_INFO, LOG_FIP, | 
 | 				"2760 Perform FLOGI roundrobin FCF failover: " | 
 | 				"FCF (x%x) back to FCF (x%x)\n", | 
 | 				phba->fcf.current_rec.fcf_indx, fcf_index); | 
 | 		/* Wait 500 ms before retrying FLOGI to current FCF */ | 
 | 		msleep(500); | 
 | 		lpfc_issue_init_vfi(phba->pport); | 
 | 		goto out; | 
 | 	} | 
 |  | 
 | 	/* Upload new FCF record to the failover FCF record */ | 
 | 	lpfc_printf_log(phba, KERN_INFO, LOG_FIP, | 
 | 			"2834 Update current FCF (x%x) with new FCF (x%x)\n", | 
 | 			phba->fcf.failover_rec.fcf_indx, fcf_index); | 
 | 	spin_lock_irq(&phba->hbalock); | 
 | 	__lpfc_update_fcf_record(phba, &phba->fcf.failover_rec, | 
 | 				 new_fcf_record, addr_mode, vlan_id, | 
 | 				 (boot_flag ? BOOT_ENABLE : 0)); | 
 | 	spin_unlock_irq(&phba->hbalock); | 
 |  | 
 | 	current_fcf_index = phba->fcf.current_rec.fcf_indx; | 
 |  | 
 | 	/* Unregister the current in-use FCF record */ | 
 | 	lpfc_unregister_fcf(phba); | 
 |  | 
 | 	/* Replace in-use record with the new record */ | 
 | 	memcpy(&phba->fcf.current_rec, &phba->fcf.failover_rec, | 
 | 	       sizeof(struct lpfc_fcf_rec)); | 
 |  | 
 | 	lpfc_printf_log(phba, KERN_INFO, LOG_FIP, | 
 | 			"2783 Perform FLOGI roundrobin FCF failover: FCF " | 
 | 			"(x%x) to FCF (x%x)\n", current_fcf_index, fcf_index); | 
 |  | 
 | error_out: | 
 | 	lpfc_register_fcf(phba); | 
 | out: | 
 | 	lpfc_sli4_mbox_cmd_free(phba, mboxq); | 
 | } | 
 |  | 
 | /** | 
 |  * lpfc_mbx_cmpl_read_fcf_rec - read fcf completion handler. | 
 |  * @phba: pointer to lpfc hba data structure. | 
 |  * @mboxq: pointer to mailbox object. | 
 |  * | 
 |  * This is the callback function of read FCF record mailbox command for | 
 |  * updating the eligible FCF bmask for FLOGI failure roundrobin FCF | 
 |  * failover when a new FCF event happened. If the FCF read back is | 
 |  * valid/available and it passes the connection list check, it updates | 
 |  * the bmask for the eligible FCF record for roundrobin failover. | 
 |  */ | 
 | void | 
 | lpfc_mbx_cmpl_read_fcf_rec(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq) | 
 | { | 
 | 	struct fcf_record *new_fcf_record; | 
 | 	uint32_t boot_flag, addr_mode; | 
 | 	uint16_t fcf_index, next_fcf_index; | 
 | 	uint16_t vlan_id =  LPFC_FCOE_NULL_VID; | 
 | 	int rc; | 
 |  | 
 | 	/* If link state is not up, no need to proceed */ | 
 | 	if (phba->link_state < LPFC_LINK_UP) | 
 | 		goto out; | 
 |  | 
 | 	/* If FCF discovery period is over, no need to proceed */ | 
 | 	if (!(phba->fcf.fcf_flag & FCF_DISCOVERY)) | 
 | 		goto out; | 
 |  | 
 | 	/* Parse the FCF record from the non-embedded mailbox command */ | 
 | 	new_fcf_record = lpfc_sli4_fcf_rec_mbox_parse(phba, mboxq, | 
 | 						      &next_fcf_index); | 
 | 	if (!new_fcf_record) { | 
 | 		lpfc_printf_log(phba, KERN_INFO, LOG_FIP, | 
 | 				"2767 Mailbox command READ_FCF_RECORD " | 
 | 				"failed to retrieve a FCF record.\n"); | 
 | 		goto out; | 
 | 	} | 
 |  | 
 | 	/* Check the connection list for eligibility */ | 
 | 	rc = lpfc_match_fcf_conn_list(phba, new_fcf_record, &boot_flag, | 
 | 				      &addr_mode, &vlan_id); | 
 |  | 
 | 	/* Log the FCF record information if turned on */ | 
 | 	lpfc_sli4_log_fcf_record_info(phba, new_fcf_record, vlan_id, | 
 | 				      next_fcf_index); | 
 |  | 
 | 	if (!rc) | 
 | 		goto out; | 
 |  | 
 | 	/* Update the eligible FCF record index bmask */ | 
 | 	fcf_index = bf_get(lpfc_fcf_record_fcf_index, new_fcf_record); | 
 |  | 
 | 	rc = lpfc_sli4_fcf_pri_list_add(phba, fcf_index, new_fcf_record); | 
 |  | 
 | out: | 
 | 	lpfc_sli4_mbox_cmd_free(phba, mboxq); | 
 | } | 
 |  | 
 | /** | 
 |  * lpfc_init_vfi_cmpl - Completion handler for init_vfi mbox command. | 
 |  * @phba: pointer to lpfc hba data structure. | 
 |  * @mboxq: pointer to mailbox data structure. | 
 |  * | 
 |  * This function handles completion of init vfi mailbox command. | 
 |  */ | 
 | static void | 
 | lpfc_init_vfi_cmpl(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq) | 
 | { | 
 | 	struct lpfc_vport *vport = mboxq->vport; | 
 |  | 
 | 	/* | 
 | 	 * VFI not supported on interface type 0, just do the flogi | 
 | 	 * Also continue if the VFI is in use - just use the same one. | 
 | 	 */ | 
 | 	if (mboxq->u.mb.mbxStatus && | 
 | 	    (bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) != | 
 | 			LPFC_SLI_INTF_IF_TYPE_0) && | 
 | 	    mboxq->u.mb.mbxStatus != MBX_VFI_IN_USE) { | 
 | 		lpfc_printf_vlog(vport, KERN_ERR, LOG_TRACE_EVENT, | 
 | 				 "2891 Init VFI mailbox failed 0x%x\n", | 
 | 				 mboxq->u.mb.mbxStatus); | 
 | 		mempool_free(mboxq, phba->mbox_mem_pool); | 
 | 		lpfc_vport_set_state(vport, FC_VPORT_FAILED); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	lpfc_initial_flogi(vport); | 
 | 	mempool_free(mboxq, phba->mbox_mem_pool); | 
 | 	return; | 
 | } | 
 |  | 
 | /** | 
 |  * lpfc_issue_init_vfi - Issue init_vfi mailbox command. | 
 |  * @vport: pointer to lpfc_vport data structure. | 
 |  * | 
 |  * This function issue a init_vfi mailbox command to initialize the VFI and | 
 |  * VPI for the physical port. | 
 |  */ | 
 | void | 
 | lpfc_issue_init_vfi(struct lpfc_vport *vport) | 
 | { | 
 | 	LPFC_MBOXQ_t *mboxq; | 
 | 	int rc; | 
 | 	struct lpfc_hba *phba = vport->phba; | 
 |  | 
 | 	mboxq = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); | 
 | 	if (!mboxq) { | 
 | 		lpfc_printf_vlog(vport, KERN_ERR, | 
 | 			LOG_TRACE_EVENT, "2892 Failed to allocate " | 
 | 			"init_vfi mailbox\n"); | 
 | 		return; | 
 | 	} | 
 | 	lpfc_init_vfi(mboxq, vport); | 
 | 	mboxq->mbox_cmpl = lpfc_init_vfi_cmpl; | 
 | 	rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_NOWAIT); | 
 | 	if (rc == MBX_NOT_FINISHED) { | 
 | 		lpfc_printf_vlog(vport, KERN_ERR, LOG_TRACE_EVENT, | 
 | 				 "2893 Failed to issue init_vfi mailbox\n"); | 
 | 		mempool_free(mboxq, vport->phba->mbox_mem_pool); | 
 | 	} | 
 | } | 
 |  | 
 | /** | 
 |  * lpfc_init_vpi_cmpl - Completion handler for init_vpi mbox command. | 
 |  * @phba: pointer to lpfc hba data structure. | 
 |  * @mboxq: pointer to mailbox data structure. | 
 |  * | 
 |  * This function handles completion of init vpi mailbox command. | 
 |  */ | 
 | void | 
 | lpfc_init_vpi_cmpl(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq) | 
 | { | 
 | 	struct lpfc_vport *vport = mboxq->vport; | 
 | 	struct lpfc_nodelist *ndlp; | 
 |  | 
 | 	if (mboxq->u.mb.mbxStatus) { | 
 | 		lpfc_printf_vlog(vport, KERN_ERR, LOG_TRACE_EVENT, | 
 | 				 "2609 Init VPI mailbox failed 0x%x\n", | 
 | 				 mboxq->u.mb.mbxStatus); | 
 | 		mempool_free(mboxq, phba->mbox_mem_pool); | 
 | 		lpfc_vport_set_state(vport, FC_VPORT_FAILED); | 
 | 		return; | 
 | 	} | 
 | 	clear_bit(FC_VPORT_NEEDS_INIT_VPI, &vport->fc_flag); | 
 |  | 
 | 	/* If this port is physical port or FDISC is done, do reg_vpi */ | 
 | 	if ((phba->pport == vport) || (vport->port_state == LPFC_FDISC)) { | 
 | 			ndlp = lpfc_findnode_did(vport, Fabric_DID); | 
 | 			if (!ndlp) | 
 | 				lpfc_printf_vlog(vport, KERN_ERR, | 
 | 					LOG_TRACE_EVENT, | 
 | 					"2731 Cannot find fabric " | 
 | 					"controller node\n"); | 
 | 			else | 
 | 				lpfc_register_new_vport(phba, vport, ndlp); | 
 | 			mempool_free(mboxq, phba->mbox_mem_pool); | 
 | 			return; | 
 | 	} | 
 |  | 
 | 	if (phba->link_flag & LS_NPIV_FAB_SUPPORTED) | 
 | 		lpfc_initial_fdisc(vport); | 
 | 	else { | 
 | 		lpfc_vport_set_state(vport, FC_VPORT_NO_FABRIC_SUPP); | 
 | 		lpfc_printf_vlog(vport, KERN_ERR, LOG_TRACE_EVENT, | 
 | 				 "2606 No NPIV Fabric support\n"); | 
 | 	} | 
 | 	mempool_free(mboxq, phba->mbox_mem_pool); | 
 | 	return; | 
 | } | 
 |  | 
 | /** | 
 |  * lpfc_issue_init_vpi - Issue init_vpi mailbox command. | 
 |  * @vport: pointer to lpfc_vport data structure. | 
 |  * | 
 |  * This function issue a init_vpi mailbox command to initialize | 
 |  * VPI for the vport. | 
 |  */ | 
 | void | 
 | lpfc_issue_init_vpi(struct lpfc_vport *vport) | 
 | { | 
 | 	LPFC_MBOXQ_t *mboxq; | 
 | 	int rc, vpi; | 
 |  | 
 | 	if ((vport->port_type != LPFC_PHYSICAL_PORT) && (!vport->vpi)) { | 
 | 		vpi = lpfc_alloc_vpi(vport->phba); | 
 | 		if (!vpi) { | 
 | 			lpfc_printf_vlog(vport, KERN_ERR, LOG_TRACE_EVENT, | 
 | 					 "3303 Failed to obtain vport vpi\n"); | 
 | 			lpfc_vport_set_state(vport, FC_VPORT_FAILED); | 
 | 			return; | 
 | 		} | 
 | 		vport->vpi = vpi; | 
 | 	} | 
 |  | 
 | 	mboxq = mempool_alloc(vport->phba->mbox_mem_pool, GFP_KERNEL); | 
 | 	if (!mboxq) { | 
 | 		lpfc_printf_vlog(vport, KERN_ERR, | 
 | 			LOG_TRACE_EVENT, "2607 Failed to allocate " | 
 | 			"init_vpi mailbox\n"); | 
 | 		return; | 
 | 	} | 
 | 	lpfc_init_vpi(vport->phba, mboxq, vport->vpi); | 
 | 	mboxq->vport = vport; | 
 | 	mboxq->mbox_cmpl = lpfc_init_vpi_cmpl; | 
 | 	rc = lpfc_sli_issue_mbox(vport->phba, mboxq, MBX_NOWAIT); | 
 | 	if (rc == MBX_NOT_FINISHED) { | 
 | 		lpfc_printf_vlog(vport, KERN_ERR, LOG_TRACE_EVENT, | 
 | 				 "2608 Failed to issue init_vpi mailbox\n"); | 
 | 		mempool_free(mboxq, vport->phba->mbox_mem_pool); | 
 | 	} | 
 | } | 
 |  | 
 | /** | 
 |  * lpfc_start_fdiscs - send fdiscs for each vports on this port. | 
 |  * @phba: pointer to lpfc hba data structure. | 
 |  * | 
 |  * This function loops through the list of vports on the @phba and issues an | 
 |  * FDISC if possible. | 
 |  */ | 
 | void | 
 | lpfc_start_fdiscs(struct lpfc_hba *phba) | 
 | { | 
 | 	struct lpfc_vport **vports; | 
 | 	int i; | 
 |  | 
 | 	vports = lpfc_create_vport_work_array(phba); | 
 | 	if (vports != NULL) { | 
 | 		for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) { | 
 | 			if (vports[i]->port_type == LPFC_PHYSICAL_PORT) | 
 | 				continue; | 
 | 			/* There are no vpi for this vport */ | 
 | 			if (vports[i]->vpi > phba->max_vpi) { | 
 | 				lpfc_vport_set_state(vports[i], | 
 | 						     FC_VPORT_FAILED); | 
 | 				continue; | 
 | 			} | 
 | 			if (phba->fc_topology == LPFC_TOPOLOGY_LOOP) { | 
 | 				lpfc_vport_set_state(vports[i], | 
 | 						     FC_VPORT_LINKDOWN); | 
 | 				continue; | 
 | 			} | 
 | 			if (test_bit(FC_VPORT_NEEDS_INIT_VPI, | 
 | 				     &vports[i]->fc_flag)) { | 
 | 				lpfc_issue_init_vpi(vports[i]); | 
 | 				continue; | 
 | 			} | 
 | 			if (phba->link_flag & LS_NPIV_FAB_SUPPORTED) | 
 | 				lpfc_initial_fdisc(vports[i]); | 
 | 			else { | 
 | 				lpfc_vport_set_state(vports[i], | 
 | 						     FC_VPORT_NO_FABRIC_SUPP); | 
 | 				lpfc_printf_vlog(vports[i], KERN_ERR, | 
 | 						 LOG_TRACE_EVENT, | 
 | 						 "0259 No NPIV " | 
 | 						 "Fabric support\n"); | 
 | 			} | 
 | 		} | 
 | 	} | 
 | 	lpfc_destroy_vport_work_array(phba, vports); | 
 | } | 
 |  | 
 | void | 
 | lpfc_mbx_cmpl_reg_vfi(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq) | 
 | { | 
 | 	struct lpfc_vport *vport = mboxq->vport; | 
 | 	struct Scsi_Host *shost = lpfc_shost_from_vport(vport); | 
 |  | 
 | 	/* | 
 | 	 * VFI not supported for interface type 0, so ignore any mailbox | 
 | 	 * error (except VFI in use) and continue with the discovery. | 
 | 	 */ | 
 | 	if (mboxq->u.mb.mbxStatus && | 
 | 	    (bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) != | 
 | 			LPFC_SLI_INTF_IF_TYPE_0) && | 
 | 	    mboxq->u.mb.mbxStatus != MBX_VFI_IN_USE) { | 
 | 		lpfc_printf_vlog(vport, KERN_ERR, LOG_TRACE_EVENT, | 
 | 				 "2018 REG_VFI mbxStatus error x%x " | 
 | 				 "HBA state x%x\n", | 
 | 				 mboxq->u.mb.mbxStatus, vport->port_state); | 
 | 		if (phba->fc_topology == LPFC_TOPOLOGY_LOOP) { | 
 | 			/* FLOGI failed, use loop map to make discovery list */ | 
 | 			lpfc_disc_list_loopmap(vport); | 
 | 			/* Start discovery */ | 
 | 			lpfc_disc_start(vport); | 
 | 			goto out_free_mem; | 
 | 		} | 
 | 		lpfc_vport_set_state(vport, FC_VPORT_FAILED); | 
 | 		goto out_free_mem; | 
 | 	} | 
 |  | 
 | 	/* If the VFI is already registered, there is nothing else to do | 
 | 	 * Unless this was a VFI update and we are in PT2PT mode, then | 
 | 	 * we should drop through to set the port state to ready. | 
 | 	 */ | 
 | 	if (test_bit(FC_VFI_REGISTERED, &vport->fc_flag)) | 
 | 		if (!(phba->sli_rev == LPFC_SLI_REV4 && | 
 | 		      test_bit(FC_PT2PT, &vport->fc_flag))) | 
 | 			goto out_free_mem; | 
 |  | 
 | 	/* The VPI is implicitly registered when the VFI is registered */ | 
 | 	set_bit(FC_VFI_REGISTERED, &vport->fc_flag); | 
 | 	clear_bit(FC_VPORT_NEEDS_REG_VPI, &vport->fc_flag); | 
 | 	clear_bit(FC_VPORT_NEEDS_INIT_VPI, &vport->fc_flag); | 
 | 	spin_lock_irq(shost->host_lock); | 
 | 	vport->vpi_state |= LPFC_VPI_REGISTERED; | 
 | 	spin_unlock_irq(shost->host_lock); | 
 |  | 
 | 	/* In case SLI4 FC loopback test, we are ready */ | 
 | 	if ((phba->sli_rev == LPFC_SLI_REV4) && | 
 | 	    (phba->link_flag & LS_LOOPBACK_MODE)) { | 
 | 		phba->link_state = LPFC_HBA_READY; | 
 | 		goto out_free_mem; | 
 | 	} | 
 |  | 
 | 	lpfc_printf_vlog(vport, KERN_INFO, LOG_SLI, | 
 | 			 "3313 cmpl reg vfi  port_state:%x fc_flag:%lx " | 
 | 			 "myDid:%x alpacnt:%d LinkState:%x topology:%x\n", | 
 | 			 vport->port_state, vport->fc_flag, vport->fc_myDID, | 
 | 			 vport->phba->alpa_map[0], | 
 | 			 phba->link_state, phba->fc_topology); | 
 |  | 
 | 	if (vport->port_state == LPFC_FABRIC_CFG_LINK) { | 
 | 		/* | 
 | 		 * For private loop or for NPort pt2pt, | 
 | 		 * just start discovery and we are done. | 
 | 		 */ | 
 | 		if (test_bit(FC_PT2PT, &vport->fc_flag) || | 
 | 		    (phba->fc_topology == LPFC_TOPOLOGY_LOOP && | 
 | 		    !test_bit(FC_PUBLIC_LOOP, &vport->fc_flag))) { | 
 |  | 
 | 			/* Use loop map to make discovery list */ | 
 | 			lpfc_disc_list_loopmap(vport); | 
 | 			/* Start discovery */ | 
 | 			if (test_bit(FC_PT2PT, &vport->fc_flag)) | 
 | 				vport->port_state = LPFC_VPORT_READY; | 
 | 			else | 
 | 				lpfc_disc_start(vport); | 
 | 		} else { | 
 | 			lpfc_start_fdiscs(phba); | 
 | 			lpfc_do_scr_ns_plogi(phba, vport); | 
 | 		} | 
 | 	} | 
 |  | 
 | out_free_mem: | 
 | 	lpfc_mbox_rsrc_cleanup(phba, mboxq, MBOX_THD_UNLOCKED); | 
 | } | 
 |  | 
 | static void | 
 | lpfc_mbx_cmpl_read_sparam(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) | 
 | { | 
 | 	MAILBOX_t *mb = &pmb->u.mb; | 
 | 	struct lpfc_dmabuf *mp = pmb->ctx_buf; | 
 | 	struct lpfc_vport  *vport = pmb->vport; | 
 | 	struct Scsi_Host *shost = lpfc_shost_from_vport(vport); | 
 | 	struct serv_parm *sp = &vport->fc_sparam; | 
 | 	uint32_t ed_tov; | 
 |  | 
 | 	/* Check for error */ | 
 | 	if (mb->mbxStatus) { | 
 | 		/* READ_SPARAM mbox error <mbxStatus> state <hba_state> */ | 
 | 		lpfc_printf_vlog(vport, KERN_ERR, LOG_TRACE_EVENT, | 
 | 				 "0319 READ_SPARAM mbxStatus error x%x " | 
 | 				 "hba state x%x>\n", | 
 | 				 mb->mbxStatus, vport->port_state); | 
 | 		lpfc_linkdown(phba); | 
 | 		goto out; | 
 | 	} | 
 |  | 
 | 	memcpy((uint8_t *) &vport->fc_sparam, (uint8_t *) mp->virt, | 
 | 	       sizeof (struct serv_parm)); | 
 |  | 
 | 	ed_tov = be32_to_cpu(sp->cmn.e_d_tov); | 
 | 	if (sp->cmn.edtovResolution)	/* E_D_TOV ticks are in nanoseconds */ | 
 | 		ed_tov = (ed_tov + 999999) / 1000000; | 
 |  | 
 | 	phba->fc_edtov = ed_tov; | 
 | 	phba->fc_ratov = (2 * ed_tov) / 1000; | 
 | 	if (phba->fc_ratov < FF_DEF_RATOV) { | 
 | 		/* RA_TOV should be atleast 10sec for initial flogi */ | 
 | 		phba->fc_ratov = FF_DEF_RATOV; | 
 | 	} | 
 |  | 
 | 	lpfc_update_vport_wwn(vport); | 
 | 	fc_host_port_name(shost) = wwn_to_u64(vport->fc_portname.u.wwn); | 
 | 	if (vport->port_type == LPFC_PHYSICAL_PORT) { | 
 | 		memcpy(&phba->wwnn, &vport->fc_nodename, sizeof(phba->wwnn)); | 
 | 		memcpy(&phba->wwpn, &vport->fc_portname, sizeof(phba->wwnn)); | 
 | 	} | 
 |  | 
 | 	lpfc_mbox_rsrc_cleanup(phba, pmb, MBOX_THD_UNLOCKED); | 
 |  | 
 | 	/* Check if sending the FLOGI is being deferred to after we get | 
 | 	 * up to date CSPs from MBX_READ_SPARAM. | 
 | 	 */ | 
 | 	if (test_bit(HBA_DEFER_FLOGI, &phba->hba_flag)) { | 
 | 		lpfc_initial_flogi(vport); | 
 | 		clear_bit(HBA_DEFER_FLOGI, &phba->hba_flag); | 
 | 	} | 
 | 	return; | 
 |  | 
 | out: | 
 | 	lpfc_mbox_rsrc_cleanup(phba, pmb, MBOX_THD_UNLOCKED); | 
 | 	lpfc_issue_clear_la(phba, vport); | 
 | } | 
 |  | 
 | static void | 
 | lpfc_mbx_process_link_up(struct lpfc_hba *phba, struct lpfc_mbx_read_top *la) | 
 | { | 
 | 	struct lpfc_vport *vport = phba->pport; | 
 | 	LPFC_MBOXQ_t *sparam_mbox, *cfglink_mbox = NULL; | 
 | 	int i; | 
 | 	int rc; | 
 | 	struct fcf_record *fcf_record; | 
 | 	unsigned long iflags; | 
 |  | 
 | 	spin_lock_irqsave(&phba->hbalock, iflags); | 
 | 	phba->fc_linkspeed = bf_get(lpfc_mbx_read_top_link_spd, la); | 
 |  | 
 | 	if (!test_bit(HBA_FCOE_MODE, &phba->hba_flag)) { | 
 | 		switch (bf_get(lpfc_mbx_read_top_link_spd, la)) { | 
 | 		case LPFC_LINK_SPEED_1GHZ: | 
 | 		case LPFC_LINK_SPEED_2GHZ: | 
 | 		case LPFC_LINK_SPEED_4GHZ: | 
 | 		case LPFC_LINK_SPEED_8GHZ: | 
 | 		case LPFC_LINK_SPEED_10GHZ: | 
 | 		case LPFC_LINK_SPEED_16GHZ: | 
 | 		case LPFC_LINK_SPEED_32GHZ: | 
 | 		case LPFC_LINK_SPEED_64GHZ: | 
 | 		case LPFC_LINK_SPEED_128GHZ: | 
 | 		case LPFC_LINK_SPEED_256GHZ: | 
 | 			break; | 
 | 		default: | 
 | 			phba->fc_linkspeed = LPFC_LINK_SPEED_UNKNOWN; | 
 | 			break; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	if (phba->fc_topology && | 
 | 	    phba->fc_topology != bf_get(lpfc_mbx_read_top_topology, la)) { | 
 | 		lpfc_printf_log(phba, KERN_WARNING, LOG_SLI, | 
 | 				"3314 Toplogy changed was 0x%x is 0x%x\n", | 
 | 				phba->fc_topology, | 
 | 				bf_get(lpfc_mbx_read_top_topology, la)); | 
 | 		phba->fc_topology_changed = 1; | 
 | 	} | 
 |  | 
 | 	phba->fc_topology = bf_get(lpfc_mbx_read_top_topology, la); | 
 | 	phba->link_flag &= ~(LS_NPIV_FAB_SUPPORTED | LS_CT_VEN_RPA); | 
 |  | 
 | 	if (phba->fc_topology == LPFC_TOPOLOGY_LOOP) { | 
 | 		phba->sli3_options &= ~LPFC_SLI3_NPIV_ENABLED; | 
 |  | 
 | 		/* if npiv is enabled and this adapter supports npiv log | 
 | 		 * a message that npiv is not supported in this topology | 
 | 		 */ | 
 | 		if (phba->cfg_enable_npiv && phba->max_vpi) | 
 | 			lpfc_printf_log(phba, KERN_ERR, LOG_LINK_EVENT, | 
 | 				"1309 Link Up Event npiv not supported in loop " | 
 | 				"topology\n"); | 
 | 				/* Get Loop Map information */ | 
 | 		if (bf_get(lpfc_mbx_read_top_il, la)) | 
 | 			set_bit(FC_LBIT, &vport->fc_flag); | 
 |  | 
 | 		vport->fc_myDID = bf_get(lpfc_mbx_read_top_alpa_granted, la); | 
 | 		i = la->lilpBde64.tus.f.bdeSize; | 
 |  | 
 | 		if (i == 0) { | 
 | 			phba->alpa_map[0] = 0; | 
 | 		} else { | 
 | 			if (vport->cfg_log_verbose & LOG_LINK_EVENT) { | 
 | 				int numalpa, j, k; | 
 | 				union { | 
 | 					uint8_t pamap[16]; | 
 | 					struct { | 
 | 						uint32_t wd1; | 
 | 						uint32_t wd2; | 
 | 						uint32_t wd3; | 
 | 						uint32_t wd4; | 
 | 					} pa; | 
 | 				} un; | 
 | 				numalpa = phba->alpa_map[0]; | 
 | 				j = 0; | 
 | 				while (j < numalpa) { | 
 | 					memset(un.pamap, 0, 16); | 
 | 					for (k = 1; j < numalpa; k++) { | 
 | 						un.pamap[k - 1] = | 
 | 							phba->alpa_map[j + 1]; | 
 | 						j++; | 
 | 						if (k == 16) | 
 | 							break; | 
 | 					} | 
 | 					/* Link Up Event ALPA map */ | 
 | 					lpfc_printf_log(phba, | 
 | 							KERN_WARNING, | 
 | 							LOG_LINK_EVENT, | 
 | 							"1304 Link Up Event " | 
 | 							"ALPA map Data: x%x " | 
 | 							"x%x x%x x%x\n", | 
 | 							un.pa.wd1, un.pa.wd2, | 
 | 							un.pa.wd3, un.pa.wd4); | 
 | 				} | 
 | 			} | 
 | 		} | 
 | 	} else { | 
 | 		if (!(phba->sli3_options & LPFC_SLI3_NPIV_ENABLED)) { | 
 | 			if (phba->max_vpi && phba->cfg_enable_npiv && | 
 | 			   (phba->sli_rev >= LPFC_SLI_REV3)) | 
 | 				phba->sli3_options |= LPFC_SLI3_NPIV_ENABLED; | 
 | 		} | 
 | 		vport->fc_myDID = phba->fc_pref_DID; | 
 | 		set_bit(FC_LBIT, &vport->fc_flag); | 
 | 	} | 
 | 	spin_unlock_irqrestore(&phba->hbalock, iflags); | 
 |  | 
 | 	lpfc_linkup(phba); | 
 | 	sparam_mbox = NULL; | 
 |  | 
 | 	sparam_mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); | 
 | 	if (!sparam_mbox) | 
 | 		goto out; | 
 |  | 
 | 	rc = lpfc_read_sparam(phba, sparam_mbox, 0); | 
 | 	if (rc) { | 
 | 		mempool_free(sparam_mbox, phba->mbox_mem_pool); | 
 | 		goto out; | 
 | 	} | 
 | 	sparam_mbox->vport = vport; | 
 | 	sparam_mbox->mbox_cmpl = lpfc_mbx_cmpl_read_sparam; | 
 | 	rc = lpfc_sli_issue_mbox(phba, sparam_mbox, MBX_NOWAIT); | 
 | 	if (rc == MBX_NOT_FINISHED) { | 
 | 		lpfc_mbox_rsrc_cleanup(phba, sparam_mbox, MBOX_THD_UNLOCKED); | 
 | 		goto out; | 
 | 	} | 
 |  | 
 | 	if (!test_bit(HBA_FCOE_MODE, &phba->hba_flag)) { | 
 | 		cfglink_mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); | 
 | 		if (!cfglink_mbox) | 
 | 			goto out; | 
 | 		vport->port_state = LPFC_LOCAL_CFG_LINK; | 
 | 		lpfc_config_link(phba, cfglink_mbox); | 
 | 		cfglink_mbox->vport = vport; | 
 | 		cfglink_mbox->mbox_cmpl = lpfc_mbx_cmpl_local_config_link; | 
 | 		rc = lpfc_sli_issue_mbox(phba, cfglink_mbox, MBX_NOWAIT); | 
 | 		if (rc == MBX_NOT_FINISHED) { | 
 | 			mempool_free(cfglink_mbox, phba->mbox_mem_pool); | 
 | 			goto out; | 
 | 		} | 
 | 	} else { | 
 | 		vport->port_state = LPFC_VPORT_UNKNOWN; | 
 | 		/* | 
 | 		 * Add the driver's default FCF record at FCF index 0 now. This | 
 | 		 * is phase 1 implementation that support FCF index 0 and driver | 
 | 		 * defaults. | 
 | 		 */ | 
 | 		if (!test_bit(HBA_FIP_SUPPORT, &phba->hba_flag)) { | 
 | 			fcf_record = kzalloc(sizeof(struct fcf_record), | 
 | 					GFP_KERNEL); | 
 | 			if (unlikely(!fcf_record)) { | 
 | 				lpfc_printf_log(phba, KERN_ERR, | 
 | 					LOG_TRACE_EVENT, | 
 | 					"2554 Could not allocate memory for " | 
 | 					"fcf record\n"); | 
 | 				rc = -ENODEV; | 
 | 				goto out; | 
 | 			} | 
 |  | 
 | 			lpfc_sli4_build_dflt_fcf_record(phba, fcf_record, | 
 | 						LPFC_FCOE_FCF_DEF_INDEX); | 
 | 			rc = lpfc_sli4_add_fcf_record(phba, fcf_record); | 
 | 			if (unlikely(rc)) { | 
 | 				lpfc_printf_log(phba, KERN_ERR, | 
 | 					LOG_TRACE_EVENT, | 
 | 					"2013 Could not manually add FCF " | 
 | 					"record 0, status %d\n", rc); | 
 | 				rc = -ENODEV; | 
 | 				kfree(fcf_record); | 
 | 				goto out; | 
 | 			} | 
 | 			kfree(fcf_record); | 
 | 		} | 
 | 		/* | 
 | 		 * The driver is expected to do FIP/FCF. Call the port | 
 | 		 * and get the FCF Table. | 
 | 		 */ | 
 | 		if (test_bit(FCF_TS_INPROG, &phba->hba_flag)) | 
 | 			return; | 
 | 		/* This is the initial FCF discovery scan */ | 
 | 		spin_lock_irqsave(&phba->hbalock, iflags); | 
 | 		phba->fcf.fcf_flag |= FCF_INIT_DISC; | 
 | 		spin_unlock_irqrestore(&phba->hbalock, iflags); | 
 | 		lpfc_printf_log(phba, KERN_INFO, LOG_FIP | LOG_DISCOVERY, | 
 | 				"2778 Start FCF table scan at linkup\n"); | 
 | 		rc = lpfc_sli4_fcf_scan_read_fcf_rec(phba, | 
 | 						     LPFC_FCOE_FCF_GET_FIRST); | 
 | 		if (rc) { | 
 | 			spin_lock_irqsave(&phba->hbalock, iflags); | 
 | 			phba->fcf.fcf_flag &= ~FCF_INIT_DISC; | 
 | 			spin_unlock_irqrestore(&phba->hbalock, iflags); | 
 | 			goto out; | 
 | 		} | 
 | 		/* Reset FCF roundrobin bmask for new discovery */ | 
 | 		lpfc_sli4_clear_fcf_rr_bmask(phba); | 
 | 	} | 
 |  | 
 | 	/* Prepare for LINK up registrations */ | 
 | 	memset(phba->os_host_name, 0, sizeof(phba->os_host_name)); | 
 | 	scnprintf(phba->os_host_name, sizeof(phba->os_host_name), "%s", | 
 | 		  init_utsname()->nodename); | 
 | 	return; | 
 | out: | 
 | 	lpfc_vport_set_state(vport, FC_VPORT_FAILED); | 
 | 	lpfc_printf_vlog(vport, KERN_ERR, LOG_TRACE_EVENT, | 
 | 			 "0263 Discovery Mailbox error: state: 0x%x : x%px x%px\n", | 
 | 			 vport->port_state, sparam_mbox, cfglink_mbox); | 
 | 	lpfc_issue_clear_la(phba, vport); | 
 | 	return; | 
 | } | 
 |  | 
 | static void | 
 | lpfc_enable_la(struct lpfc_hba *phba) | 
 | { | 
 | 	uint32_t control; | 
 | 	struct lpfc_sli *psli = &phba->sli; | 
 | 	spin_lock_irq(&phba->hbalock); | 
 | 	psli->sli_flag |= LPFC_PROCESS_LA; | 
 | 	if (phba->sli_rev <= LPFC_SLI_REV3) { | 
 | 		control = readl(phba->HCregaddr); | 
 | 		control |= HC_LAINT_ENA; | 
 | 		writel(control, phba->HCregaddr); | 
 | 		readl(phba->HCregaddr); /* flush */ | 
 | 	} | 
 | 	spin_unlock_irq(&phba->hbalock); | 
 | } | 
 |  | 
 | static void | 
 | lpfc_mbx_issue_link_down(struct lpfc_hba *phba) | 
 | { | 
 | 	lpfc_linkdown(phba); | 
 | 	lpfc_enable_la(phba); | 
 | 	lpfc_unregister_unused_fcf(phba); | 
 | 	/* turn on Link Attention interrupts - no CLEAR_LA needed */ | 
 | } | 
 |  | 
 |  | 
 | /* | 
 |  * This routine handles processing a READ_TOPOLOGY mailbox | 
 |  * command upon completion. It is setup in the LPFC_MBOXQ | 
 |  * as the completion routine when the command is | 
 |  * handed off to the SLI layer. SLI4 only. | 
 |  */ | 
 | void | 
 | lpfc_mbx_cmpl_read_topology(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) | 
 | { | 
 | 	struct lpfc_vport *vport = pmb->vport; | 
 | 	struct lpfc_mbx_read_top *la; | 
 | 	struct lpfc_sli_ring *pring; | 
 | 	MAILBOX_t *mb = &pmb->u.mb; | 
 | 	struct lpfc_dmabuf *mp = pmb->ctx_buf; | 
 | 	uint8_t attn_type; | 
 |  | 
 | 	/* Unblock ELS traffic */ | 
 | 	pring = lpfc_phba_elsring(phba); | 
 | 	if (pring) | 
 | 		pring->flag &= ~LPFC_STOP_IOCB_EVENT; | 
 |  | 
 | 	/* Check for error */ | 
 | 	if (mb->mbxStatus) { | 
 | 		lpfc_printf_log(phba, KERN_INFO, LOG_LINK_EVENT, | 
 | 				"1307 READ_LA mbox error x%x state x%x\n", | 
 | 				mb->mbxStatus, vport->port_state); | 
 | 		lpfc_mbx_issue_link_down(phba); | 
 | 		phba->link_state = LPFC_HBA_ERROR; | 
 | 		goto lpfc_mbx_cmpl_read_topology_free_mbuf; | 
 | 	} | 
 |  | 
 | 	la = (struct lpfc_mbx_read_top *) &pmb->u.mb.un.varReadTop; | 
 | 	attn_type = bf_get(lpfc_mbx_read_top_att_type, la); | 
 |  | 
 | 	memcpy(&phba->alpa_map[0], mp->virt, 128); | 
 |  | 
 | 	if (bf_get(lpfc_mbx_read_top_pb, la)) | 
 | 		set_bit(FC_BYPASSED_MODE, &vport->fc_flag); | 
 | 	else | 
 | 		clear_bit(FC_BYPASSED_MODE, &vport->fc_flag); | 
 |  | 
 | 	if (phba->fc_eventTag <= la->eventTag) { | 
 | 		phba->fc_stat.LinkMultiEvent++; | 
 | 		if (attn_type == LPFC_ATT_LINK_UP) | 
 | 			if (phba->fc_eventTag != 0) | 
 | 				lpfc_linkdown(phba); | 
 | 	} | 
 |  | 
 | 	phba->fc_eventTag = la->eventTag; | 
 | 	phba->link_events++; | 
 | 	if (attn_type == LPFC_ATT_LINK_UP) { | 
 | 		phba->fc_stat.LinkUp++; | 
 | 		if (phba->link_flag & LS_LOOPBACK_MODE) { | 
 | 			lpfc_printf_log(phba, KERN_ERR, LOG_LINK_EVENT, | 
 | 					"1306 Link Up Event in loop back mode " | 
 | 					"x%x received Data: x%x x%x x%x x%x\n", | 
 | 					la->eventTag, phba->fc_eventTag, | 
 | 					bf_get(lpfc_mbx_read_top_alpa_granted, | 
 | 					       la), | 
 | 					bf_get(lpfc_mbx_read_top_link_spd, la), | 
 | 					phba->alpa_map[0]); | 
 | 		} else { | 
 | 			lpfc_printf_log(phba, KERN_ERR, LOG_LINK_EVENT, | 
 | 					"1303 Link Up Event x%x received " | 
 | 					"Data: x%x x%x x%x x%x x%x\n", | 
 | 					la->eventTag, phba->fc_eventTag, | 
 | 					bf_get(lpfc_mbx_read_top_alpa_granted, | 
 | 					       la), | 
 | 					bf_get(lpfc_mbx_read_top_link_spd, la), | 
 | 					phba->alpa_map[0], | 
 | 					bf_get(lpfc_mbx_read_top_fa, la)); | 
 | 		} | 
 | 		lpfc_mbx_process_link_up(phba, la); | 
 |  | 
 | 		if (phba->cmf_active_mode != LPFC_CFG_OFF) | 
 | 			lpfc_cmf_signal_init(phba); | 
 |  | 
 | 		if (phba->lmt & LMT_64Gb) | 
 | 			lpfc_read_lds_params(phba); | 
 |  | 
 | 	} else if (attn_type == LPFC_ATT_LINK_DOWN || | 
 | 		   attn_type == LPFC_ATT_UNEXP_WWPN) { | 
 | 		phba->fc_stat.LinkDown++; | 
 | 		if (phba->link_flag & LS_LOOPBACK_MODE) | 
 | 			lpfc_printf_log(phba, KERN_ERR, LOG_LINK_EVENT, | 
 | 				"1308 Link Down Event in loop back mode " | 
 | 				"x%x received " | 
 | 				"Data: x%x x%x x%lx\n", | 
 | 				la->eventTag, phba->fc_eventTag, | 
 | 				phba->pport->port_state, vport->fc_flag); | 
 | 		else if (attn_type == LPFC_ATT_UNEXP_WWPN) | 
 | 			lpfc_printf_log(phba, KERN_ERR, LOG_LINK_EVENT, | 
 | 				"1313 Link Down Unexpected FA WWPN Event x%x " | 
 | 				"received Data: x%x x%x x%lx x%x\n", | 
 | 				la->eventTag, phba->fc_eventTag, | 
 | 				phba->pport->port_state, vport->fc_flag, | 
 | 				bf_get(lpfc_mbx_read_top_fa, la)); | 
 | 		else | 
 | 			lpfc_printf_log(phba, KERN_ERR, LOG_LINK_EVENT, | 
 | 				"1305 Link Down Event x%x received " | 
 | 				"Data: x%x x%x x%lx x%x\n", | 
 | 				la->eventTag, phba->fc_eventTag, | 
 | 				phba->pport->port_state, vport->fc_flag, | 
 | 				bf_get(lpfc_mbx_read_top_fa, la)); | 
 | 		lpfc_mbx_issue_link_down(phba); | 
 | 	} | 
 |  | 
 | 	if ((phba->sli_rev < LPFC_SLI_REV4) && | 
 | 	    bf_get(lpfc_mbx_read_top_fa, la)) | 
 | 		lpfc_printf_log(phba, KERN_INFO, LOG_LINK_EVENT, | 
 | 				"1311 fa %d\n", | 
 | 				bf_get(lpfc_mbx_read_top_fa, la)); | 
 |  | 
 | lpfc_mbx_cmpl_read_topology_free_mbuf: | 
 | 	lpfc_mbox_rsrc_cleanup(phba, pmb, MBOX_THD_UNLOCKED); | 
 | } | 
 |  | 
 | /* | 
 |  * This routine handles processing a REG_LOGIN mailbox | 
 |  * command upon completion. It is setup in the LPFC_MBOXQ | 
 |  * as the completion routine when the command is | 
 |  * handed off to the SLI layer. | 
 |  */ | 
 | void | 
 | lpfc_mbx_cmpl_reg_login(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) | 
 | { | 
 | 	struct lpfc_vport  *vport = pmb->vport; | 
 | 	struct lpfc_dmabuf *mp = pmb->ctx_buf; | 
 | 	struct lpfc_nodelist *ndlp = pmb->ctx_ndlp; | 
 |  | 
 | 	/* The driver calls the state machine with the pmb pointer | 
 | 	 * but wants to make sure a stale ctx_buf isn't acted on. | 
 | 	 * The ctx_buf is restored later and cleaned up. | 
 | 	 */ | 
 | 	pmb->ctx_buf = NULL; | 
 | 	pmb->ctx_ndlp = NULL; | 
 |  | 
 | 	lpfc_printf_vlog(vport, KERN_INFO, LOG_SLI | LOG_NODE | LOG_DISCOVERY, | 
 | 			 "0002 rpi:%x DID:%x flg:%x %d x%px\n", | 
 | 			 ndlp->nlp_rpi, ndlp->nlp_DID, ndlp->nlp_flag, | 
 | 			 kref_read(&ndlp->kref), | 
 | 			 ndlp); | 
 | 	if (ndlp->nlp_flag & NLP_REG_LOGIN_SEND) | 
 | 		ndlp->nlp_flag &= ~NLP_REG_LOGIN_SEND; | 
 |  | 
 | 	if (ndlp->nlp_flag & NLP_IGNR_REG_CMPL || | 
 | 	    ndlp->nlp_state != NLP_STE_REG_LOGIN_ISSUE) { | 
 | 		/* We rcvd a rscn after issuing this | 
 | 		 * mbox reg login, we may have cycled | 
 | 		 * back through the state and be | 
 | 		 * back at reg login state so this | 
 | 		 * mbox needs to be ignored becase | 
 | 		 * there is another reg login in | 
 | 		 * process. | 
 | 		 */ | 
 | 		spin_lock_irq(&ndlp->lock); | 
 | 		ndlp->nlp_flag &= ~NLP_IGNR_REG_CMPL; | 
 | 		spin_unlock_irq(&ndlp->lock); | 
 |  | 
 | 		/* | 
 | 		 * We cannot leave the RPI registered because | 
 | 		 * if we go thru discovery again for this ndlp | 
 | 		 * a subsequent REG_RPI will fail. | 
 | 		 */ | 
 | 		ndlp->nlp_flag |= NLP_RPI_REGISTERED; | 
 | 		lpfc_unreg_rpi(vport, ndlp); | 
 | 	} | 
 |  | 
 | 	/* Call state machine */ | 
 | 	lpfc_disc_state_machine(vport, ndlp, pmb, NLP_EVT_CMPL_REG_LOGIN); | 
 | 	pmb->ctx_buf = mp; | 
 | 	lpfc_mbox_rsrc_cleanup(phba, pmb, MBOX_THD_UNLOCKED); | 
 |  | 
 | 	/* decrement the node reference count held for this callback | 
 | 	 * function. | 
 | 	 */ | 
 | 	lpfc_nlp_put(ndlp); | 
 |  | 
 | 	return; | 
 | } | 
 |  | 
 | static void | 
 | lpfc_mbx_cmpl_unreg_vpi(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) | 
 | { | 
 | 	MAILBOX_t *mb = &pmb->u.mb; | 
 | 	struct lpfc_vport *vport = pmb->vport; | 
 | 	struct Scsi_Host  *shost = lpfc_shost_from_vport(vport); | 
 |  | 
 | 	switch (mb->mbxStatus) { | 
 | 	case 0x0011: | 
 | 	case 0x0020: | 
 | 		lpfc_printf_vlog(vport, KERN_INFO, LOG_NODE, | 
 | 				 "0911 cmpl_unreg_vpi, mb status = 0x%x\n", | 
 | 				 mb->mbxStatus); | 
 | 		break; | 
 | 	/* If VPI is busy, reset the HBA */ | 
 | 	case 0x9700: | 
 | 		lpfc_printf_vlog(vport, KERN_ERR, LOG_TRACE_EVENT, | 
 | 			"2798 Unreg_vpi failed vpi 0x%x, mb status = 0x%x\n", | 
 | 			vport->vpi, mb->mbxStatus); | 
 | 		if (!test_bit(FC_UNLOADING, &phba->pport->load_flag)) | 
 | 			lpfc_workq_post_event(phba, NULL, NULL, | 
 | 				LPFC_EVT_RESET_HBA); | 
 | 	} | 
 |  | 
 | 	set_bit(FC_VPORT_NEEDS_REG_VPI, &vport->fc_flag); | 
 | 	spin_lock_irq(shost->host_lock); | 
 | 	vport->vpi_state &= ~LPFC_VPI_REGISTERED; | 
 | 	spin_unlock_irq(shost->host_lock); | 
 | 	mempool_free(pmb, phba->mbox_mem_pool); | 
 | 	lpfc_cleanup_vports_rrqs(vport, NULL); | 
 | 	/* | 
 | 	 * This shost reference might have been taken at the beginning of | 
 | 	 * lpfc_vport_delete() | 
 | 	 */ | 
 | 	if (test_bit(FC_UNLOADING, &vport->load_flag) && vport != phba->pport) | 
 | 		scsi_host_put(shost); | 
 | } | 
 |  | 
 | int | 
 | lpfc_mbx_unreg_vpi(struct lpfc_vport *vport) | 
 | { | 
 | 	struct lpfc_hba  *phba = vport->phba; | 
 | 	LPFC_MBOXQ_t *mbox; | 
 | 	int rc; | 
 |  | 
 | 	mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); | 
 | 	if (!mbox) | 
 | 		return 1; | 
 |  | 
 | 	lpfc_unreg_vpi(phba, vport->vpi, mbox); | 
 | 	mbox->vport = vport; | 
 | 	mbox->mbox_cmpl = lpfc_mbx_cmpl_unreg_vpi; | 
 | 	rc = lpfc_sli_issue_mbox(phba, mbox, MBX_NOWAIT); | 
 | 	if (rc == MBX_NOT_FINISHED) { | 
 | 		lpfc_printf_vlog(vport, KERN_ERR, LOG_TRACE_EVENT, | 
 | 				 "1800 Could not issue unreg_vpi\n"); | 
 | 		mempool_free(mbox, phba->mbox_mem_pool); | 
 | 		return rc; | 
 | 	} | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void | 
 | lpfc_mbx_cmpl_reg_vpi(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) | 
 | { | 
 | 	struct lpfc_vport *vport = pmb->vport; | 
 | 	struct Scsi_Host  *shost = lpfc_shost_from_vport(vport); | 
 | 	MAILBOX_t *mb = &pmb->u.mb; | 
 |  | 
 | 	switch (mb->mbxStatus) { | 
 | 	case 0x0011: | 
 | 	case 0x9601: | 
 | 	case 0x9602: | 
 | 		lpfc_printf_vlog(vport, KERN_INFO, LOG_NODE, | 
 | 				 "0912 cmpl_reg_vpi, mb status = 0x%x\n", | 
 | 				 mb->mbxStatus); | 
 | 		lpfc_vport_set_state(vport, FC_VPORT_FAILED); | 
 | 		clear_bit(FC_FABRIC, &vport->fc_flag); | 
 | 		clear_bit(FC_PUBLIC_LOOP, &vport->fc_flag); | 
 | 		vport->fc_myDID = 0; | 
 |  | 
 | 		if ((vport->cfg_enable_fc4_type == LPFC_ENABLE_BOTH) || | 
 | 		    (vport->cfg_enable_fc4_type == LPFC_ENABLE_NVME)) { | 
 | 			if (phba->nvmet_support) | 
 | 				lpfc_nvmet_update_targetport(phba); | 
 | 			else | 
 | 				lpfc_nvme_update_localport(vport); | 
 | 		} | 
 | 		goto out; | 
 | 	} | 
 |  | 
 | 	clear_bit(FC_VPORT_NEEDS_REG_VPI, &vport->fc_flag); | 
 | 	spin_lock_irq(shost->host_lock); | 
 | 	vport->vpi_state |= LPFC_VPI_REGISTERED; | 
 | 	spin_unlock_irq(shost->host_lock); | 
 | 	vport->num_disc_nodes = 0; | 
 | 	/* go thru NPR list and issue ELS PLOGIs */ | 
 | 	if (atomic_read(&vport->fc_npr_cnt)) | 
 | 		lpfc_els_disc_plogi(vport); | 
 |  | 
 | 	if (!vport->num_disc_nodes) { | 
 | 		clear_bit(FC_NDISC_ACTIVE, &vport->fc_flag); | 
 | 		lpfc_can_disctmo(vport); | 
 | 	} | 
 | 	vport->port_state = LPFC_VPORT_READY; | 
 |  | 
 | out: | 
 | 	mempool_free(pmb, phba->mbox_mem_pool); | 
 | 	return; | 
 | } | 
 |  | 
 | /** | 
 |  * lpfc_create_static_vport - Read HBA config region to create static vports. | 
 |  * @phba: pointer to lpfc hba data structure. | 
 |  * | 
 |  * This routine issue a DUMP mailbox command for config region 22 to get | 
 |  * the list of static vports to be created. The function create vports | 
 |  * based on the information returned from the HBA. | 
 |  **/ | 
 | void | 
 | lpfc_create_static_vport(struct lpfc_hba *phba) | 
 | { | 
 | 	LPFC_MBOXQ_t *pmb = NULL; | 
 | 	MAILBOX_t *mb; | 
 | 	struct static_vport_info *vport_info; | 
 | 	int mbx_wait_rc = 0, i; | 
 | 	struct fc_vport_identifiers vport_id; | 
 | 	struct fc_vport *new_fc_vport; | 
 | 	struct Scsi_Host *shost; | 
 | 	struct lpfc_vport *vport; | 
 | 	uint16_t offset = 0; | 
 | 	uint8_t *vport_buff; | 
 | 	struct lpfc_dmabuf *mp; | 
 | 	uint32_t byte_count = 0; | 
 |  | 
 | 	pmb = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); | 
 | 	if (!pmb) { | 
 | 		lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, | 
 | 				"0542 lpfc_create_static_vport failed to" | 
 | 				" allocate mailbox memory\n"); | 
 | 		return; | 
 | 	} | 
 | 	memset(pmb, 0, sizeof(LPFC_MBOXQ_t)); | 
 | 	mb = &pmb->u.mb; | 
 |  | 
 | 	vport_info = kzalloc(sizeof(struct static_vport_info), GFP_KERNEL); | 
 | 	if (!vport_info) { | 
 | 		lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, | 
 | 				"0543 lpfc_create_static_vport failed to" | 
 | 				" allocate vport_info\n"); | 
 | 		mempool_free(pmb, phba->mbox_mem_pool); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	vport_buff = (uint8_t *) vport_info; | 
 | 	do { | 
 | 		/* While loop iteration forces a free dma buffer from | 
 | 		 * the previous loop because the mbox is reused and | 
 | 		 * the dump routine is a single-use construct. | 
 | 		 */ | 
 | 		if (pmb->ctx_buf) { | 
 | 			mp = pmb->ctx_buf; | 
 | 			lpfc_mbuf_free(phba, mp->virt, mp->phys); | 
 | 			kfree(mp); | 
 | 			pmb->ctx_buf = NULL; | 
 | 		} | 
 | 		if (lpfc_dump_static_vport(phba, pmb, offset)) | 
 | 			goto out; | 
 |  | 
 | 		pmb->vport = phba->pport; | 
 | 		mbx_wait_rc = lpfc_sli_issue_mbox_wait(phba, pmb, | 
 | 							LPFC_MBOX_TMO); | 
 |  | 
 | 		if ((mbx_wait_rc != MBX_SUCCESS) || mb->mbxStatus) { | 
 | 			lpfc_printf_log(phba, KERN_WARNING, LOG_INIT, | 
 | 				"0544 lpfc_create_static_vport failed to" | 
 | 				" issue dump mailbox command ret 0x%x " | 
 | 				"status 0x%x\n", | 
 | 				mbx_wait_rc, mb->mbxStatus); | 
 | 			goto out; | 
 | 		} | 
 |  | 
 | 		if (phba->sli_rev == LPFC_SLI_REV4) { | 
 | 			byte_count = pmb->u.mqe.un.mb_words[5]; | 
 | 			mp = pmb->ctx_buf; | 
 | 			if (byte_count > sizeof(struct static_vport_info) - | 
 | 					offset) | 
 | 				byte_count = sizeof(struct static_vport_info) | 
 | 					- offset; | 
 | 			memcpy(vport_buff + offset, mp->virt, byte_count); | 
 | 			offset += byte_count; | 
 | 		} else { | 
 | 			if (mb->un.varDmp.word_cnt > | 
 | 				sizeof(struct static_vport_info) - offset) | 
 | 				mb->un.varDmp.word_cnt = | 
 | 					sizeof(struct static_vport_info) | 
 | 						- offset; | 
 | 			byte_count = mb->un.varDmp.word_cnt; | 
 | 			lpfc_sli_pcimem_bcopy(((uint8_t *)mb) + DMP_RSP_OFFSET, | 
 | 				vport_buff + offset, | 
 | 				byte_count); | 
 |  | 
 | 			offset += byte_count; | 
 | 		} | 
 |  | 
 | 	} while (byte_count && | 
 | 		offset < sizeof(struct static_vport_info)); | 
 |  | 
 |  | 
 | 	if ((le32_to_cpu(vport_info->signature) != VPORT_INFO_SIG) || | 
 | 		((le32_to_cpu(vport_info->rev) & VPORT_INFO_REV_MASK) | 
 | 			!= VPORT_INFO_REV)) { | 
 | 		lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, | 
 | 				"0545 lpfc_create_static_vport bad" | 
 | 				" information header 0x%x 0x%x\n", | 
 | 				le32_to_cpu(vport_info->signature), | 
 | 				le32_to_cpu(vport_info->rev) & | 
 | 				VPORT_INFO_REV_MASK); | 
 |  | 
 | 		goto out; | 
 | 	} | 
 |  | 
 | 	shost = lpfc_shost_from_vport(phba->pport); | 
 |  | 
 | 	for (i = 0; i < MAX_STATIC_VPORT_COUNT; i++) { | 
 | 		memset(&vport_id, 0, sizeof(vport_id)); | 
 | 		vport_id.port_name = wwn_to_u64(vport_info->vport_list[i].wwpn); | 
 | 		vport_id.node_name = wwn_to_u64(vport_info->vport_list[i].wwnn); | 
 | 		if (!vport_id.port_name || !vport_id.node_name) | 
 | 			continue; | 
 |  | 
 | 		vport_id.roles = FC_PORT_ROLE_FCP_INITIATOR; | 
 | 		vport_id.vport_type = FC_PORTTYPE_NPIV; | 
 | 		vport_id.disable = false; | 
 | 		new_fc_vport = fc_vport_create(shost, 0, &vport_id); | 
 |  | 
 | 		if (!new_fc_vport) { | 
 | 			lpfc_printf_log(phba, KERN_WARNING, LOG_INIT, | 
 | 				"0546 lpfc_create_static_vport failed to" | 
 | 				" create vport\n"); | 
 | 			continue; | 
 | 		} | 
 |  | 
 | 		vport = *(struct lpfc_vport **)new_fc_vport->dd_data; | 
 | 		vport->vport_flag |= STATIC_VPORT; | 
 | 	} | 
 |  | 
 | out: | 
 | 	kfree(vport_info); | 
 | 	if (mbx_wait_rc != MBX_TIMEOUT) | 
 | 		lpfc_mbox_rsrc_cleanup(phba, pmb, MBOX_THD_UNLOCKED); | 
 | } | 
 |  | 
 | /* | 
 |  * This routine handles processing a Fabric REG_LOGIN mailbox | 
 |  * command upon completion. It is setup in the LPFC_MBOXQ | 
 |  * as the completion routine when the command is | 
 |  * handed off to the SLI layer. | 
 |  */ | 
 | void | 
 | lpfc_mbx_cmpl_fabric_reg_login(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) | 
 | { | 
 | 	struct lpfc_vport *vport = pmb->vport; | 
 | 	MAILBOX_t *mb = &pmb->u.mb; | 
 | 	struct lpfc_nodelist *ndlp = pmb->ctx_ndlp; | 
 |  | 
 | 	pmb->ctx_ndlp = NULL; | 
 |  | 
 | 	if (mb->mbxStatus) { | 
 | 		lpfc_printf_vlog(vport, KERN_ERR, LOG_TRACE_EVENT, | 
 | 				 "0258 Register Fabric login error: 0x%x\n", | 
 | 				 mb->mbxStatus); | 
 | 		lpfc_mbox_rsrc_cleanup(phba, pmb, MBOX_THD_UNLOCKED); | 
 | 		if (phba->fc_topology == LPFC_TOPOLOGY_LOOP) { | 
 | 			/* FLOGI failed, use loop map to make discovery list */ | 
 | 			lpfc_disc_list_loopmap(vport); | 
 |  | 
 | 			/* Start discovery */ | 
 | 			lpfc_disc_start(vport); | 
 | 			/* Decrement the reference count to ndlp after the | 
 | 			 * reference to the ndlp are done. | 
 | 			 */ | 
 | 			lpfc_nlp_put(ndlp); | 
 | 			return; | 
 | 		} | 
 |  | 
 | 		lpfc_vport_set_state(vport, FC_VPORT_FAILED); | 
 | 		/* Decrement the reference count to ndlp after the reference | 
 | 		 * to the ndlp are done. | 
 | 		 */ | 
 | 		lpfc_nlp_put(ndlp); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	if (phba->sli_rev < LPFC_SLI_REV4) | 
 | 		ndlp->nlp_rpi = mb->un.varWords[0]; | 
 | 	ndlp->nlp_flag |= NLP_RPI_REGISTERED; | 
 | 	ndlp->nlp_type |= NLP_FABRIC; | 
 | 	lpfc_nlp_set_state(vport, ndlp, NLP_STE_UNMAPPED_NODE); | 
 |  | 
 | 	if (vport->port_state == LPFC_FABRIC_CFG_LINK) { | 
 | 		/* when physical port receive logo donot start | 
 | 		 * vport discovery */ | 
 | 		if (!test_and_clear_bit(FC_LOGO_RCVD_DID_CHNG, &vport->fc_flag)) | 
 | 			lpfc_start_fdiscs(phba); | 
 | 		lpfc_do_scr_ns_plogi(phba, vport); | 
 | 	} | 
 |  | 
 | 	lpfc_mbox_rsrc_cleanup(phba, pmb, MBOX_THD_UNLOCKED); | 
 |  | 
 | 	/* Drop the reference count from the mbox at the end after | 
 | 	 * all the current reference to the ndlp have been done. | 
 | 	 */ | 
 | 	lpfc_nlp_put(ndlp); | 
 | 	return; | 
 | } | 
 |  | 
 |  /* | 
 |   * This routine will issue a GID_FT for each FC4 Type supported | 
 |   * by the driver. ALL GID_FTs must complete before discovery is started. | 
 |   */ | 
 | int | 
 | lpfc_issue_gidft(struct lpfc_vport *vport) | 
 | { | 
 | 	/* Good status, issue CT Request to NameServer */ | 
 | 	if ((vport->cfg_enable_fc4_type == LPFC_ENABLE_BOTH) || | 
 | 	    (vport->cfg_enable_fc4_type == LPFC_ENABLE_FCP)) { | 
 | 		if (lpfc_ns_cmd(vport, SLI_CTNS_GID_FT, 0, SLI_CTPT_FCP)) { | 
 | 			/* Cannot issue NameServer FCP Query, so finish up | 
 | 			 * discovery | 
 | 			 */ | 
 | 			lpfc_printf_vlog(vport, KERN_ERR, | 
 | 					 LOG_TRACE_EVENT, | 
 | 					 "0604 %s FC TYPE %x %s\n", | 
 | 					 "Failed to issue GID_FT to ", | 
 | 					 FC_TYPE_FCP, | 
 | 					 "Finishing discovery."); | 
 | 			return 0; | 
 | 		} | 
 | 		vport->gidft_inp++; | 
 | 	} | 
 |  | 
 | 	if ((vport->cfg_enable_fc4_type == LPFC_ENABLE_BOTH) || | 
 | 	    (vport->cfg_enable_fc4_type == LPFC_ENABLE_NVME)) { | 
 | 		if (lpfc_ns_cmd(vport, SLI_CTNS_GID_FT, 0, SLI_CTPT_NVME)) { | 
 | 			/* Cannot issue NameServer NVME Query, so finish up | 
 | 			 * discovery | 
 | 			 */ | 
 | 			lpfc_printf_vlog(vport, KERN_ERR, | 
 | 					 LOG_TRACE_EVENT, | 
 | 					 "0605 %s FC_TYPE %x %s %d\n", | 
 | 					 "Failed to issue GID_FT to ", | 
 | 					 FC_TYPE_NVME, | 
 | 					 "Finishing discovery: gidftinp ", | 
 | 					 vport->gidft_inp); | 
 | 			if (vport->gidft_inp == 0) | 
 | 				return 0; | 
 | 		} else | 
 | 			vport->gidft_inp++; | 
 | 	} | 
 | 	return vport->gidft_inp; | 
 | } | 
 |  | 
 | /** | 
 |  * lpfc_issue_gidpt - issue a GID_PT for all N_Ports | 
 |  * @vport: The virtual port for which this call is being executed. | 
 |  * | 
 |  * This routine will issue a GID_PT to get a list of all N_Ports | 
 |  * | 
 |  * Return value : | 
 |  *   0 - Failure to issue a GID_PT | 
 |  *   1 - GID_PT issued | 
 |  **/ | 
 | int | 
 | lpfc_issue_gidpt(struct lpfc_vport *vport) | 
 | { | 
 | 	/* Good status, issue CT Request to NameServer */ | 
 | 	if (lpfc_ns_cmd(vport, SLI_CTNS_GID_PT, 0, GID_PT_N_PORT)) { | 
 | 		/* Cannot issue NameServer FCP Query, so finish up | 
 | 		 * discovery | 
 | 		 */ | 
 | 		lpfc_printf_vlog(vport, KERN_ERR, LOG_TRACE_EVENT, | 
 | 				 "0606 %s Port TYPE %x %s\n", | 
 | 				 "Failed to issue GID_PT to ", | 
 | 				 GID_PT_N_PORT, | 
 | 				 "Finishing discovery."); | 
 | 		return 0; | 
 | 	} | 
 | 	vport->gidft_inp++; | 
 | 	return 1; | 
 | } | 
 |  | 
 | /* | 
 |  * This routine handles processing a NameServer REG_LOGIN mailbox | 
 |  * command upon completion. It is setup in the LPFC_MBOXQ | 
 |  * as the completion routine when the command is | 
 |  * handed off to the SLI layer. | 
 |  */ | 
 | void | 
 | lpfc_mbx_cmpl_ns_reg_login(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) | 
 | { | 
 | 	MAILBOX_t *mb = &pmb->u.mb; | 
 | 	struct lpfc_nodelist *ndlp = pmb->ctx_ndlp; | 
 | 	struct lpfc_vport *vport = pmb->vport; | 
 | 	int rc; | 
 |  | 
 | 	pmb->ctx_ndlp = NULL; | 
 | 	vport->gidft_inp = 0; | 
 |  | 
 | 	if (mb->mbxStatus) { | 
 | 		lpfc_printf_vlog(vport, KERN_ERR, LOG_TRACE_EVENT, | 
 | 				 "0260 Register NameServer error: 0x%x\n", | 
 | 				 mb->mbxStatus); | 
 |  | 
 | out: | 
 | 		/* decrement the node reference count held for this | 
 | 		 * callback function. | 
 | 		 */ | 
 | 		lpfc_nlp_put(ndlp); | 
 | 		lpfc_mbox_rsrc_cleanup(phba, pmb, MBOX_THD_UNLOCKED); | 
 |  | 
 | 		/* If the node is not registered with the scsi or nvme | 
 | 		 * transport, remove the fabric node.  The failed reg_login | 
 | 		 * is terminal and forces the removal of the last node | 
 | 		 * reference. | 
 | 		 */ | 
 | 		if (!(ndlp->fc4_xpt_flags & (SCSI_XPT_REGD | NVME_XPT_REGD))) { | 
 | 			spin_lock_irq(&ndlp->lock); | 
 | 			ndlp->nlp_flag &= ~NLP_NPR_2B_DISC; | 
 | 			spin_unlock_irq(&ndlp->lock); | 
 | 			lpfc_nlp_put(ndlp); | 
 | 		} | 
 |  | 
 | 		if (phba->fc_topology == LPFC_TOPOLOGY_LOOP) { | 
 | 			/* | 
 | 			 * RegLogin failed, use loop map to make discovery | 
 | 			 * list | 
 | 			 */ | 
 | 			lpfc_disc_list_loopmap(vport); | 
 |  | 
 | 			/* Start discovery */ | 
 | 			lpfc_disc_start(vport); | 
 | 			return; | 
 | 		} | 
 | 		lpfc_vport_set_state(vport, FC_VPORT_FAILED); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	if (phba->sli_rev < LPFC_SLI_REV4) | 
 | 		ndlp->nlp_rpi = mb->un.varWords[0]; | 
 | 	ndlp->nlp_flag |= NLP_RPI_REGISTERED; | 
 | 	ndlp->nlp_type |= NLP_FABRIC; | 
 | 	lpfc_nlp_set_state(vport, ndlp, NLP_STE_UNMAPPED_NODE); | 
 | 	lpfc_printf_vlog(vport, KERN_INFO, LOG_NODE | LOG_DISCOVERY, | 
 | 			 "0003 rpi:%x DID:%x flg:%x %d x%px\n", | 
 | 			 ndlp->nlp_rpi, ndlp->nlp_DID, ndlp->nlp_flag, | 
 | 			 kref_read(&ndlp->kref), | 
 | 			 ndlp); | 
 |  | 
 | 	if (vport->port_state < LPFC_VPORT_READY) { | 
 | 		/* Link up discovery requires Fabric registration. */ | 
 | 		lpfc_ns_cmd(vport, SLI_CTNS_RNN_ID, 0, 0); | 
 | 		lpfc_ns_cmd(vport, SLI_CTNS_RSNN_NN, 0, 0); | 
 | 		lpfc_ns_cmd(vport, SLI_CTNS_RSPN_ID, 0, 0); | 
 | 		lpfc_ns_cmd(vport, SLI_CTNS_RFT_ID, 0, 0); | 
 |  | 
 | 		if ((vport->cfg_enable_fc4_type == LPFC_ENABLE_BOTH) || | 
 | 		    (vport->cfg_enable_fc4_type == LPFC_ENABLE_FCP)) | 
 | 			lpfc_ns_cmd(vport, SLI_CTNS_RFF_ID, 0, FC_TYPE_FCP); | 
 |  | 
 | 		if ((vport->cfg_enable_fc4_type == LPFC_ENABLE_BOTH) || | 
 | 		    (vport->cfg_enable_fc4_type == LPFC_ENABLE_NVME)) | 
 | 			lpfc_ns_cmd(vport, SLI_CTNS_RFF_ID, 0, | 
 | 				    FC_TYPE_NVME); | 
 |  | 
 | 		/* Issue SCR just before NameServer GID_FT Query */ | 
 | 		lpfc_issue_els_scr(vport, 0); | 
 |  | 
 | 		/* Link was bounced or a Fabric LOGO occurred.  Start EDC | 
 | 		 * with initial FW values provided the congestion mode is | 
 | 		 * not off.  Note that signals may or may not be supported | 
 | 		 * by the adapter but FPIN is provided by default for 1 | 
 | 		 * or both missing signals support. | 
 | 		 */ | 
 | 		if (phba->cmf_active_mode != LPFC_CFG_OFF) { | 
 | 			phba->cgn_reg_fpin = phba->cgn_init_reg_fpin; | 
 | 			phba->cgn_reg_signal = phba->cgn_init_reg_signal; | 
 | 			rc = lpfc_issue_els_edc(vport, 0); | 
 | 			lpfc_printf_log(phba, KERN_INFO, | 
 | 					LOG_INIT | LOG_ELS | LOG_DISCOVERY, | 
 | 					"4220 Issue EDC status x%x Data x%x\n", | 
 | 					rc, phba->cgn_init_reg_signal); | 
 | 		} else if (phba->lmt & LMT_64Gb) { | 
 | 			/* may send link fault capability descriptor */ | 
 | 			lpfc_issue_els_edc(vport, 0); | 
 | 		} else { | 
 | 			lpfc_issue_els_rdf(vport, 0); | 
 | 		} | 
 | 	} | 
 |  | 
 | 	vport->fc_ns_retry = 0; | 
 | 	if (lpfc_issue_gidft(vport) == 0) | 
 | 		goto out; | 
 |  | 
 | 	/* | 
 | 	 * At this point in time we may need to wait for multiple | 
 | 	 * SLI_CTNS_GID_FT CT commands to complete before we start discovery. | 
 | 	 * | 
 | 	 * decrement the node reference count held for this | 
 | 	 * callback function. | 
 | 	 */ | 
 | 	lpfc_nlp_put(ndlp); | 
 | 	lpfc_mbox_rsrc_cleanup(phba, pmb, MBOX_THD_UNLOCKED); | 
 | 	return; | 
 | } | 
 |  | 
 | /* | 
 |  * This routine handles processing a Fabric Controller REG_LOGIN mailbox | 
 |  * command upon completion. It is setup in the LPFC_MBOXQ | 
 |  * as the completion routine when the command is handed off to the SLI layer. | 
 |  */ | 
 | void | 
 | lpfc_mbx_cmpl_fc_reg_login(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) | 
 | { | 
 | 	struct lpfc_vport *vport = pmb->vport; | 
 | 	MAILBOX_t *mb = &pmb->u.mb; | 
 | 	struct lpfc_nodelist *ndlp = pmb->ctx_ndlp; | 
 |  | 
 | 	pmb->ctx_ndlp = NULL; | 
 | 	if (mb->mbxStatus) { | 
 | 		lpfc_printf_vlog(vport, KERN_ERR, LOG_TRACE_EVENT, | 
 | 				 "0933 %s: Register FC login error: 0x%x\n", | 
 | 				 __func__, mb->mbxStatus); | 
 | 		goto out; | 
 | 	} | 
 |  | 
 | 	lpfc_check_nlp_post_devloss(vport, ndlp); | 
 |  | 
 | 	if (phba->sli_rev < LPFC_SLI_REV4) | 
 | 		ndlp->nlp_rpi = mb->un.varWords[0]; | 
 |  | 
 | 	lpfc_printf_vlog(vport, KERN_INFO, LOG_NODE, | 
 | 			 "0934 %s: Complete FC x%x RegLogin rpi x%x ste x%x\n", | 
 | 			 __func__, ndlp->nlp_DID, ndlp->nlp_rpi, | 
 | 			 ndlp->nlp_state); | 
 |  | 
 | 	ndlp->nlp_flag |= NLP_RPI_REGISTERED; | 
 | 	ndlp->nlp_flag &= ~NLP_REG_LOGIN_SEND; | 
 | 	ndlp->nlp_type |= NLP_FABRIC; | 
 | 	lpfc_nlp_set_state(vport, ndlp, NLP_STE_UNMAPPED_NODE); | 
 |  | 
 |  out: | 
 | 	lpfc_mbox_rsrc_cleanup(phba, pmb, MBOX_THD_UNLOCKED); | 
 |  | 
 | 	/* Drop the reference count from the mbox at the end after | 
 | 	 * all the current reference to the ndlp have been done. | 
 | 	 */ | 
 | 	lpfc_nlp_put(ndlp); | 
 | } | 
 |  | 
 | static void | 
 | lpfc_register_remote_port(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp) | 
 | { | 
 | 	struct Scsi_Host *shost = lpfc_shost_from_vport(vport); | 
 | 	struct fc_rport  *rport; | 
 | 	struct lpfc_rport_data *rdata; | 
 | 	struct fc_rport_identifiers rport_ids; | 
 | 	struct lpfc_hba  *phba = vport->phba; | 
 | 	unsigned long flags; | 
 |  | 
 | 	if (vport->cfg_enable_fc4_type == LPFC_ENABLE_NVME) | 
 | 		return; | 
 |  | 
 | 	/* Remote port has reappeared. Re-register w/ FC transport */ | 
 | 	rport_ids.node_name = wwn_to_u64(ndlp->nlp_nodename.u.wwn); | 
 | 	rport_ids.port_name = wwn_to_u64(ndlp->nlp_portname.u.wwn); | 
 | 	rport_ids.port_id = ndlp->nlp_DID; | 
 | 	rport_ids.roles = FC_RPORT_ROLE_UNKNOWN; | 
 |  | 
 |  | 
 | 	lpfc_debugfs_disc_trc(vport, LPFC_DISC_TRC_RPORT, | 
 | 			      "rport add:       did:x%x flg:x%x type x%x", | 
 | 			      ndlp->nlp_DID, ndlp->nlp_flag, ndlp->nlp_type); | 
 |  | 
 | 	/* Don't add the remote port if unloading. */ | 
 | 	if (test_bit(FC_UNLOADING, &vport->load_flag)) | 
 | 		return; | 
 |  | 
 | 	ndlp->rport = rport = fc_remote_port_add(shost, 0, &rport_ids); | 
 | 	if (!rport) { | 
 | 		dev_printk(KERN_WARNING, &phba->pcidev->dev, | 
 | 			   "Warning: fc_remote_port_add failed\n"); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	/* Successful port add.  Complete initializing node data */ | 
 | 	rport->maxframe_size = ndlp->nlp_maxframe; | 
 | 	rport->supported_classes = ndlp->nlp_class_sup; | 
 | 	rdata = rport->dd_data; | 
 | 	rdata->pnode = lpfc_nlp_get(ndlp); | 
 | 	if (!rdata->pnode) { | 
 | 		dev_warn(&phba->pcidev->dev, | 
 | 			 "Warning - node ref failed. Unreg rport\n"); | 
 | 		fc_remote_port_delete(rport); | 
 | 		ndlp->rport = NULL; | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	spin_lock_irqsave(&ndlp->lock, flags); | 
 | 	ndlp->fc4_xpt_flags |= SCSI_XPT_REGD; | 
 | 	spin_unlock_irqrestore(&ndlp->lock, flags); | 
 |  | 
 | 	if (ndlp->nlp_type & NLP_FCP_TARGET) | 
 | 		rport_ids.roles |= FC_PORT_ROLE_FCP_TARGET; | 
 | 	if (ndlp->nlp_type & NLP_FCP_INITIATOR) | 
 | 		rport_ids.roles |= FC_PORT_ROLE_FCP_INITIATOR; | 
 | 	if (ndlp->nlp_type & NLP_NVME_INITIATOR) | 
 | 		rport_ids.roles |= FC_PORT_ROLE_NVME_INITIATOR; | 
 | 	if (ndlp->nlp_type & NLP_NVME_TARGET) | 
 | 		rport_ids.roles |= FC_PORT_ROLE_NVME_TARGET; | 
 | 	if (ndlp->nlp_type & NLP_NVME_DISCOVERY) | 
 | 		rport_ids.roles |= FC_PORT_ROLE_NVME_DISCOVERY; | 
 |  | 
 | 	if (rport_ids.roles !=  FC_RPORT_ROLE_UNKNOWN) | 
 | 		fc_remote_port_rolechg(rport, rport_ids.roles); | 
 |  | 
 | 	lpfc_printf_vlog(ndlp->vport, KERN_INFO, LOG_NODE, | 
 | 			 "3183 %s rport x%px DID x%x, role x%x refcnt %d\n", | 
 | 			 __func__, rport, rport->port_id, rport->roles, | 
 | 			 kref_read(&ndlp->kref)); | 
 |  | 
 | 	if ((rport->scsi_target_id != -1) && | 
 | 	    (rport->scsi_target_id < LPFC_MAX_TARGET)) { | 
 | 		ndlp->nlp_sid = rport->scsi_target_id; | 
 | 	} | 
 |  | 
 | 	return; | 
 | } | 
 |  | 
 | static void | 
 | lpfc_unregister_remote_port(struct lpfc_nodelist *ndlp) | 
 | { | 
 | 	struct fc_rport *rport = ndlp->rport; | 
 | 	struct lpfc_vport *vport = ndlp->vport; | 
 |  | 
 | 	if (vport->cfg_enable_fc4_type == LPFC_ENABLE_NVME) | 
 | 		return; | 
 |  | 
 | 	lpfc_debugfs_disc_trc(vport, LPFC_DISC_TRC_RPORT, | 
 | 		"rport delete:    did:x%x flg:x%x type x%x", | 
 | 		ndlp->nlp_DID, ndlp->nlp_flag, ndlp->nlp_type); | 
 |  | 
 | 	lpfc_printf_vlog(vport, KERN_INFO, LOG_NODE, | 
 | 			 "3184 rport unregister x%06x, rport x%px " | 
 | 			 "xptflg x%x refcnt %d\n", | 
 | 			 ndlp->nlp_DID, rport, ndlp->fc4_xpt_flags, | 
 | 			 kref_read(&ndlp->kref)); | 
 |  | 
 | 	fc_remote_port_delete(rport); | 
 | 	lpfc_nlp_put(ndlp); | 
 | } | 
 |  | 
 | static void | 
 | lpfc_nlp_counters(struct lpfc_vport *vport, int state, int count) | 
 | { | 
 | 	switch (state) { | 
 | 	case NLP_STE_UNUSED_NODE: | 
 | 		atomic_add(count, &vport->fc_unused_cnt); | 
 | 		break; | 
 | 	case NLP_STE_PLOGI_ISSUE: | 
 | 		atomic_add(count, &vport->fc_plogi_cnt); | 
 | 		break; | 
 | 	case NLP_STE_ADISC_ISSUE: | 
 | 		atomic_add(count, &vport->fc_adisc_cnt); | 
 | 		break; | 
 | 	case NLP_STE_REG_LOGIN_ISSUE: | 
 | 		atomic_add(count, &vport->fc_reglogin_cnt); | 
 | 		break; | 
 | 	case NLP_STE_PRLI_ISSUE: | 
 | 		atomic_add(count, &vport->fc_prli_cnt); | 
 | 		break; | 
 | 	case NLP_STE_UNMAPPED_NODE: | 
 | 		atomic_add(count, &vport->fc_unmap_cnt); | 
 | 		break; | 
 | 	case NLP_STE_MAPPED_NODE: | 
 | 		atomic_add(count, &vport->fc_map_cnt); | 
 | 		break; | 
 | 	case NLP_STE_NPR_NODE: | 
 | 		if (!atomic_read(&vport->fc_npr_cnt) && count == -1) | 
 | 			atomic_set(&vport->fc_npr_cnt, 0); | 
 | 		else | 
 | 			atomic_add(count, &vport->fc_npr_cnt); | 
 | 		break; | 
 | 	} | 
 | } | 
 |  | 
 | /* Register a node with backend if not already done */ | 
 | void | 
 | lpfc_nlp_reg_node(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp) | 
 | { | 
 | 	unsigned long iflags; | 
 |  | 
 | 	lpfc_check_nlp_post_devloss(vport, ndlp); | 
 |  | 
 | 	spin_lock_irqsave(&ndlp->lock, iflags); | 
 | 	if (ndlp->fc4_xpt_flags & NLP_XPT_REGD) { | 
 | 		/* Already registered with backend, trigger rescan */ | 
 | 		spin_unlock_irqrestore(&ndlp->lock, iflags); | 
 |  | 
 | 		if (ndlp->fc4_xpt_flags & NVME_XPT_REGD && | 
 | 		    ndlp->nlp_type & (NLP_NVME_TARGET | NLP_NVME_DISCOVERY)) { | 
 | 			lpfc_nvme_rescan_port(vport, ndlp); | 
 | 		} | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	ndlp->fc4_xpt_flags |= NLP_XPT_REGD; | 
 | 	spin_unlock_irqrestore(&ndlp->lock, iflags); | 
 |  | 
 | 	if (lpfc_valid_xpt_node(ndlp)) { | 
 | 		vport->phba->nport_event_cnt++; | 
 | 		/* | 
 | 		 * Tell the fc transport about the port, if we haven't | 
 | 		 * already. If we have, and it's a scsi entity, be | 
 | 		 */ | 
 | 		lpfc_register_remote_port(vport, ndlp); | 
 | 	} | 
 |  | 
 | 	/* We are done if we do not have any NVME remote node */ | 
 | 	if (!(ndlp->nlp_fc4_type & NLP_FC4_NVME)) | 
 | 		return; | 
 |  | 
 | 	/* Notify the NVME transport of this new rport. */ | 
 | 	if (vport->phba->sli_rev >= LPFC_SLI_REV4 && | 
 | 			ndlp->nlp_fc4_type & NLP_FC4_NVME) { | 
 | 		if (vport->phba->nvmet_support == 0) { | 
 | 			/* Register this rport with the transport. | 
 | 			 * Only NVME Target Rports are registered with | 
 | 			 * the transport. | 
 | 			 */ | 
 | 			if (ndlp->nlp_type & NLP_NVME_TARGET) { | 
 | 				vport->phba->nport_event_cnt++; | 
 | 				lpfc_nvme_register_port(vport, ndlp); | 
 | 			} | 
 | 		} else { | 
 | 			/* Just take an NDLP ref count since the | 
 | 			 * target does not register rports. | 
 | 			 */ | 
 | 			lpfc_nlp_get(ndlp); | 
 | 		} | 
 | 	} | 
 | } | 
 |  | 
 | /* Unregister a node with backend if not already done */ | 
 | void | 
 | lpfc_nlp_unreg_node(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp) | 
 | { | 
 | 	unsigned long iflags; | 
 |  | 
 | 	spin_lock_irqsave(&ndlp->lock, iflags); | 
 | 	if (!(ndlp->fc4_xpt_flags & NLP_XPT_REGD)) { | 
 | 		spin_unlock_irqrestore(&ndlp->lock, iflags); | 
 | 		lpfc_printf_vlog(vport, KERN_INFO, | 
 | 				 LOG_ELS | LOG_NODE | LOG_DISCOVERY, | 
 | 				 "0999 %s Not regd: ndlp x%px rport x%px DID " | 
 | 				 "x%x FLG x%x XPT x%x\n", | 
 | 				  __func__, ndlp, ndlp->rport, ndlp->nlp_DID, | 
 | 				  ndlp->nlp_flag, ndlp->fc4_xpt_flags); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	ndlp->fc4_xpt_flags &= ~NLP_XPT_REGD; | 
 | 	spin_unlock_irqrestore(&ndlp->lock, iflags); | 
 |  | 
 | 	if (ndlp->rport && | 
 | 	    ndlp->fc4_xpt_flags & SCSI_XPT_REGD) { | 
 | 		vport->phba->nport_event_cnt++; | 
 | 		lpfc_unregister_remote_port(ndlp); | 
 | 	} else if (!ndlp->rport) { | 
 | 		lpfc_printf_vlog(vport, KERN_INFO, | 
 | 				 LOG_ELS | LOG_NODE | LOG_DISCOVERY, | 
 | 				 "1999 %s NDLP in devloss x%px DID x%x FLG x%x" | 
 | 				 " XPT x%x refcnt %u\n", | 
 | 				 __func__, ndlp, ndlp->nlp_DID, ndlp->nlp_flag, | 
 | 				 ndlp->fc4_xpt_flags, | 
 | 				 kref_read(&ndlp->kref)); | 
 | 	} | 
 |  | 
 | 	if (ndlp->fc4_xpt_flags & NVME_XPT_REGD) { | 
 | 		vport->phba->nport_event_cnt++; | 
 | 		if (vport->phba->nvmet_support == 0) { | 
 | 			/* Start devloss if target. */ | 
 | 			if (ndlp->nlp_type & NLP_NVME_TARGET) | 
 | 				lpfc_nvme_unregister_port(vport, ndlp); | 
 | 		} else { | 
 | 			/* NVMET has no upcall. */ | 
 | 			lpfc_nlp_put(ndlp); | 
 | 		} | 
 | 	} | 
 |  | 
 | } | 
 |  | 
 | /* | 
 |  * Adisc state change handling | 
 |  */ | 
 | static void | 
 | lpfc_handle_adisc_state(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp, | 
 | 		int new_state) | 
 | { | 
 | 	switch (new_state) { | 
 | 	/* | 
 | 	 * Any state to ADISC_ISSUE | 
 | 	 * Do nothing, adisc cmpl handling will trigger state changes | 
 | 	 */ | 
 | 	case NLP_STE_ADISC_ISSUE: | 
 | 		break; | 
 |  | 
 | 	/* | 
 | 	 * ADISC_ISSUE to mapped states | 
 | 	 * Trigger a registration with backend, it will be nop if | 
 | 	 * already registered | 
 | 	 */ | 
 | 	case NLP_STE_UNMAPPED_NODE: | 
 | 		ndlp->nlp_type |= NLP_FC_NODE; | 
 | 		fallthrough; | 
 | 	case NLP_STE_MAPPED_NODE: | 
 | 		ndlp->nlp_flag &= ~NLP_NODEV_REMOVE; | 
 | 		lpfc_nlp_reg_node(vport, ndlp); | 
 | 		break; | 
 |  | 
 | 	/* | 
 | 	 * ADISC_ISSUE to non-mapped states | 
 | 	 * We are moving from ADISC_ISSUE to a non-mapped state because | 
 | 	 * ADISC failed, we would have skipped unregistering with | 
 | 	 * backend, attempt it now | 
 | 	 */ | 
 | 	case NLP_STE_NPR_NODE: | 
 | 		ndlp->nlp_flag &= ~NLP_RCV_PLOGI; | 
 | 		fallthrough; | 
 | 	default: | 
 | 		lpfc_nlp_unreg_node(vport, ndlp); | 
 | 		break; | 
 | 	} | 
 |  | 
 | } | 
 |  | 
 | static void | 
 | lpfc_nlp_state_cleanup(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp, | 
 | 		       int old_state, int new_state) | 
 | { | 
 | 	/* Trap ADISC changes here */ | 
 | 	if (new_state == NLP_STE_ADISC_ISSUE || | 
 | 	    old_state == NLP_STE_ADISC_ISSUE) { | 
 | 		lpfc_handle_adisc_state(vport, ndlp, new_state); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	if (new_state == NLP_STE_UNMAPPED_NODE) { | 
 | 		ndlp->nlp_flag &= ~NLP_NODEV_REMOVE; | 
 | 		ndlp->nlp_type |= NLP_FC_NODE; | 
 | 	} | 
 | 	if (new_state == NLP_STE_MAPPED_NODE) | 
 | 		ndlp->nlp_flag &= ~NLP_NODEV_REMOVE; | 
 | 	if (new_state == NLP_STE_NPR_NODE) | 
 | 		ndlp->nlp_flag &= ~NLP_RCV_PLOGI; | 
 |  | 
 | 	/* Reg/Unreg for FCP and NVME Transport interface */ | 
 | 	if ((old_state == NLP_STE_MAPPED_NODE || | 
 | 	     old_state == NLP_STE_UNMAPPED_NODE)) { | 
 | 		/* For nodes marked for ADISC, Handle unreg in ADISC cmpl | 
 | 		 * if linkup. In linkdown do unreg_node | 
 | 		 */ | 
 | 		if (!(ndlp->nlp_flag & NLP_NPR_ADISC) || | 
 | 		    !lpfc_is_link_up(vport->phba)) | 
 | 			lpfc_nlp_unreg_node(vport, ndlp); | 
 | 	} | 
 |  | 
 | 	if (new_state ==  NLP_STE_MAPPED_NODE || | 
 | 	    new_state == NLP_STE_UNMAPPED_NODE) | 
 | 		lpfc_nlp_reg_node(vport, ndlp); | 
 |  | 
 | 	/* | 
 | 	 * If the node just added to Mapped list was an FCP target, | 
 | 	 * but the remote port registration failed or assigned a target | 
 | 	 * id outside the presentable range - move the node to the | 
 | 	 * Unmapped List. | 
 | 	 */ | 
 | 	if ((new_state == NLP_STE_MAPPED_NODE) && | 
 | 	    (ndlp->nlp_type & NLP_FCP_TARGET) && | 
 | 	    (!ndlp->rport || | 
 | 	     ndlp->rport->scsi_target_id == -1 || | 
 | 	     ndlp->rport->scsi_target_id >= LPFC_MAX_TARGET)) { | 
 | 		spin_lock_irq(&ndlp->lock); | 
 | 		ndlp->nlp_flag |= NLP_TGT_NO_SCSIID; | 
 | 		spin_unlock_irq(&ndlp->lock); | 
 | 		lpfc_nlp_set_state(vport, ndlp, NLP_STE_UNMAPPED_NODE); | 
 | 	} | 
 | } | 
 |  | 
 | static char * | 
 | lpfc_nlp_state_name(char *buffer, size_t size, int state) | 
 | { | 
 | 	static char *states[] = { | 
 | 		[NLP_STE_UNUSED_NODE] = "UNUSED", | 
 | 		[NLP_STE_PLOGI_ISSUE] = "PLOGI", | 
 | 		[NLP_STE_ADISC_ISSUE] = "ADISC", | 
 | 		[NLP_STE_REG_LOGIN_ISSUE] = "REGLOGIN", | 
 | 		[NLP_STE_PRLI_ISSUE] = "PRLI", | 
 | 		[NLP_STE_LOGO_ISSUE] = "LOGO", | 
 | 		[NLP_STE_UNMAPPED_NODE] = "UNMAPPED", | 
 | 		[NLP_STE_MAPPED_NODE] = "MAPPED", | 
 | 		[NLP_STE_NPR_NODE] = "NPR", | 
 | 	}; | 
 |  | 
 | 	if (state < NLP_STE_MAX_STATE && states[state]) | 
 | 		strscpy(buffer, states[state], size); | 
 | 	else | 
 | 		snprintf(buffer, size, "unknown (%d)", state); | 
 | 	return buffer; | 
 | } | 
 |  | 
 | void | 
 | lpfc_nlp_set_state(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp, | 
 | 		   int state) | 
 | { | 
 | 	int  old_state = ndlp->nlp_state; | 
 | 	int node_dropped = ndlp->nlp_flag & NLP_DROPPED; | 
 | 	char name1[16], name2[16]; | 
 | 	unsigned long iflags; | 
 |  | 
 | 	lpfc_printf_vlog(vport, KERN_INFO, LOG_NODE, | 
 | 			 "0904 NPort state transition x%06x, %s -> %s\n", | 
 | 			 ndlp->nlp_DID, | 
 | 			 lpfc_nlp_state_name(name1, sizeof(name1), old_state), | 
 | 			 lpfc_nlp_state_name(name2, sizeof(name2), state)); | 
 |  | 
 | 	lpfc_debugfs_disc_trc(vport, LPFC_DISC_TRC_NODE, | 
 | 		"node statechg    did:x%x old:%d ste:%d", | 
 | 		ndlp->nlp_DID, old_state, state); | 
 |  | 
 | 	if (node_dropped && old_state == NLP_STE_UNUSED_NODE && | 
 | 	    state != NLP_STE_UNUSED_NODE) { | 
 | 		ndlp->nlp_flag &= ~NLP_DROPPED; | 
 | 		lpfc_nlp_get(ndlp); | 
 | 	} | 
 |  | 
 | 	if (old_state == NLP_STE_NPR_NODE && | 
 | 	    state != NLP_STE_NPR_NODE) | 
 | 		lpfc_cancel_retry_delay_tmo(vport, ndlp); | 
 | 	if (old_state == NLP_STE_UNMAPPED_NODE) { | 
 | 		ndlp->nlp_flag &= ~NLP_TGT_NO_SCSIID; | 
 | 		ndlp->nlp_type &= ~NLP_FC_NODE; | 
 | 	} | 
 |  | 
 | 	if (list_empty(&ndlp->nlp_listp)) { | 
 | 		spin_lock_irqsave(&vport->fc_nodes_list_lock, iflags); | 
 | 		list_add_tail(&ndlp->nlp_listp, &vport->fc_nodes); | 
 | 		spin_unlock_irqrestore(&vport->fc_nodes_list_lock, iflags); | 
 | 	} else if (old_state) | 
 | 		lpfc_nlp_counters(vport, old_state, -1); | 
 |  | 
 | 	ndlp->nlp_state = state; | 
 | 	lpfc_nlp_counters(vport, state, 1); | 
 | 	lpfc_nlp_state_cleanup(vport, ndlp, old_state, state); | 
 | } | 
 |  | 
 | void | 
 | lpfc_enqueue_node(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp) | 
 | { | 
 | 	unsigned long iflags; | 
 |  | 
 | 	if (list_empty(&ndlp->nlp_listp)) { | 
 | 		spin_lock_irqsave(&vport->fc_nodes_list_lock, iflags); | 
 | 		list_add_tail(&ndlp->nlp_listp, &vport->fc_nodes); | 
 | 		spin_unlock_irqrestore(&vport->fc_nodes_list_lock, iflags); | 
 | 	} | 
 | } | 
 |  | 
 | void | 
 | lpfc_dequeue_node(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp) | 
 | { | 
 | 	unsigned long iflags; | 
 |  | 
 | 	lpfc_cancel_retry_delay_tmo(vport, ndlp); | 
 | 	if (ndlp->nlp_state && !list_empty(&ndlp->nlp_listp)) | 
 | 		lpfc_nlp_counters(vport, ndlp->nlp_state, -1); | 
 | 	spin_lock_irqsave(&vport->fc_nodes_list_lock, iflags); | 
 | 	list_del_init(&ndlp->nlp_listp); | 
 | 	spin_unlock_irqrestore(&vport->fc_nodes_list_lock, iflags); | 
 | 	lpfc_nlp_state_cleanup(vport, ndlp, ndlp->nlp_state, | 
 | 				NLP_STE_UNUSED_NODE); | 
 | } | 
 |  | 
 | /** | 
 |  * lpfc_initialize_node - Initialize all fields of node object | 
 |  * @vport: Pointer to Virtual Port object. | 
 |  * @ndlp: Pointer to FC node object. | 
 |  * @did: FC_ID of the node. | 
 |  * | 
 |  * This function is always called when node object need to be initialized. | 
 |  * It initializes all the fields of the node object. Although the reference | 
 |  * to phba from @ndlp can be obtained indirectly through it's reference to | 
 |  * @vport, a direct reference to phba is taken here by @ndlp. This is due | 
 |  * to the life-span of the @ndlp might go beyond the existence of @vport as | 
 |  * the final release of ndlp is determined by its reference count. And, the | 
 |  * operation on @ndlp needs the reference to phba. | 
 |  **/ | 
 | static inline void | 
 | lpfc_initialize_node(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp, | 
 | 	uint32_t did) | 
 | { | 
 | 	INIT_LIST_HEAD(&ndlp->els_retry_evt.evt_listp); | 
 | 	INIT_LIST_HEAD(&ndlp->dev_loss_evt.evt_listp); | 
 | 	timer_setup(&ndlp->nlp_delayfunc, lpfc_els_retry_delay, 0); | 
 | 	INIT_LIST_HEAD(&ndlp->recovery_evt.evt_listp); | 
 |  | 
 | 	ndlp->nlp_DID = did; | 
 | 	ndlp->vport = vport; | 
 | 	ndlp->phba = vport->phba; | 
 | 	ndlp->nlp_sid = NLP_NO_SID; | 
 | 	ndlp->nlp_fc4_type = NLP_FC4_NONE; | 
 | 	kref_init(&ndlp->kref); | 
 | 	atomic_set(&ndlp->cmd_pending, 0); | 
 | 	ndlp->cmd_qdepth = vport->cfg_tgt_queue_depth; | 
 | 	ndlp->nlp_defer_did = NLP_EVT_NOTHING_PENDING; | 
 | } | 
 |  | 
 | void | 
 | lpfc_drop_node(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp) | 
 | { | 
 | 	/* | 
 | 	 * Use of lpfc_drop_node and UNUSED list: lpfc_drop_node should | 
 | 	 * be used when lpfc wants to remove the "last" lpfc_nlp_put() to | 
 | 	 * release the ndlp from the vport when conditions are correct. | 
 | 	 */ | 
 | 	if (ndlp->nlp_state == NLP_STE_UNUSED_NODE) | 
 | 		return; | 
 | 	lpfc_nlp_set_state(vport, ndlp, NLP_STE_UNUSED_NODE); | 
 | 	if (vport->phba->sli_rev == LPFC_SLI_REV4) { | 
 | 		lpfc_cleanup_vports_rrqs(vport, ndlp); | 
 | 		lpfc_unreg_rpi(vport, ndlp); | 
 | 	} | 
 |  | 
 | 	/* NLP_DROPPED means another thread already removed the initial | 
 | 	 * reference from lpfc_nlp_init.  If set, don't drop it again and | 
 | 	 * introduce an imbalance. | 
 | 	 */ | 
 | 	spin_lock_irq(&ndlp->lock); | 
 | 	if (!(ndlp->nlp_flag & NLP_DROPPED)) { | 
 | 		ndlp->nlp_flag |= NLP_DROPPED; | 
 | 		spin_unlock_irq(&ndlp->lock); | 
 | 		lpfc_nlp_put(ndlp); | 
 | 		return; | 
 | 	} | 
 | 	spin_unlock_irq(&ndlp->lock); | 
 | } | 
 |  | 
 | /* | 
 |  * Start / ReStart rescue timer for Discovery / RSCN handling | 
 |  */ | 
 | void | 
 | lpfc_set_disctmo(struct lpfc_vport *vport) | 
 | { | 
 | 	struct lpfc_hba  *phba = vport->phba; | 
 | 	uint32_t tmo; | 
 |  | 
 | 	if (vport->port_state == LPFC_LOCAL_CFG_LINK) { | 
 | 		/* For FAN, timeout should be greater than edtov */ | 
 | 		tmo = (((phba->fc_edtov + 999) / 1000) + 1); | 
 | 	} else { | 
 | 		/* Normal discovery timeout should be > than ELS/CT timeout | 
 | 		 * FC spec states we need 3 * ratov for CT requests | 
 | 		 */ | 
 | 		tmo = ((phba->fc_ratov * 3) + 3); | 
 | 	} | 
 |  | 
 |  | 
 | 	if (!timer_pending(&vport->fc_disctmo)) { | 
 | 		lpfc_debugfs_disc_trc(vport, LPFC_DISC_TRC_ELS_CMD, | 
 | 			"set disc timer:  tmo:x%x state:x%x flg:x%x", | 
 | 			tmo, vport->port_state, vport->fc_flag); | 
 | 	} | 
 |  | 
 | 	mod_timer(&vport->fc_disctmo, jiffies + msecs_to_jiffies(1000 * tmo)); | 
 | 	set_bit(FC_DISC_TMO, &vport->fc_flag); | 
 |  | 
 | 	/* Start Discovery Timer state <hba_state> */ | 
 | 	lpfc_printf_vlog(vport, KERN_INFO, LOG_DISCOVERY, | 
 | 			 "0247 Start Discovery Timer state x%x " | 
 | 			 "Data: x%x x%lx x%x x%x\n", | 
 | 			 vport->port_state, tmo, | 
 | 			 (unsigned long)&vport->fc_disctmo, | 
 | 			 atomic_read(&vport->fc_plogi_cnt), | 
 | 			 atomic_read(&vport->fc_adisc_cnt)); | 
 |  | 
 | 	return; | 
 | } | 
 |  | 
 | /* | 
 |  * Cancel rescue timer for Discovery / RSCN handling | 
 |  */ | 
 | int | 
 | lpfc_can_disctmo(struct lpfc_vport *vport) | 
 | { | 
 | 	unsigned long iflags; | 
 |  | 
 | 	lpfc_debugfs_disc_trc(vport, LPFC_DISC_TRC_ELS_CMD, | 
 | 		"can disc timer:  state:x%x rtry:x%x flg:x%x", | 
 | 		vport->port_state, vport->fc_ns_retry, vport->fc_flag); | 
 |  | 
 | 	/* Turn off discovery timer if its running */ | 
 | 	if (test_bit(FC_DISC_TMO, &vport->fc_flag) || | 
 | 	    timer_pending(&vport->fc_disctmo)) { | 
 | 		clear_bit(FC_DISC_TMO, &vport->fc_flag); | 
 | 		del_timer_sync(&vport->fc_disctmo); | 
 | 		spin_lock_irqsave(&vport->work_port_lock, iflags); | 
 | 		vport->work_port_events &= ~WORKER_DISC_TMO; | 
 | 		spin_unlock_irqrestore(&vport->work_port_lock, iflags); | 
 | 	} | 
 |  | 
 | 	/* Cancel Discovery Timer state <hba_state> */ | 
 | 	lpfc_printf_vlog(vport, KERN_INFO, LOG_DISCOVERY, | 
 | 			 "0248 Cancel Discovery Timer state x%x " | 
 | 			 "Data: x%lx x%x x%x\n", | 
 | 			 vport->port_state, vport->fc_flag, | 
 | 			 atomic_read(&vport->fc_plogi_cnt), | 
 | 			 atomic_read(&vport->fc_adisc_cnt)); | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* | 
 |  * Check specified ring for outstanding IOCB on the SLI queue | 
 |  * Return true if iocb matches the specified nport | 
 |  */ | 
 | int | 
 | lpfc_check_sli_ndlp(struct lpfc_hba *phba, | 
 | 		    struct lpfc_sli_ring *pring, | 
 | 		    struct lpfc_iocbq *iocb, | 
 | 		    struct lpfc_nodelist *ndlp) | 
 | { | 
 | 	struct lpfc_vport *vport = ndlp->vport; | 
 | 	u8 ulp_command; | 
 | 	u16 ulp_context; | 
 | 	u32 remote_id; | 
 |  | 
 | 	if (iocb->vport != vport) | 
 | 		return 0; | 
 |  | 
 | 	ulp_command = get_job_cmnd(phba, iocb); | 
 | 	ulp_context = get_job_ulpcontext(phba, iocb); | 
 | 	remote_id = get_job_els_rsp64_did(phba, iocb); | 
 |  | 
 | 	if (pring->ringno == LPFC_ELS_RING) { | 
 | 		switch (ulp_command) { | 
 | 		case CMD_GEN_REQUEST64_CR: | 
 | 			if (iocb->ndlp == ndlp) | 
 | 				return 1; | 
 | 			fallthrough; | 
 | 		case CMD_ELS_REQUEST64_CR: | 
 | 			if (remote_id == ndlp->nlp_DID) | 
 | 				return 1; | 
 | 			fallthrough; | 
 | 		case CMD_XMIT_ELS_RSP64_CX: | 
 | 			if (iocb->ndlp == ndlp) | 
 | 				return 1; | 
 | 		} | 
 | 	} else if (pring->ringno == LPFC_FCP_RING) { | 
 | 		/* Skip match check if waiting to relogin to FCP target */ | 
 | 		if ((ndlp->nlp_type & NLP_FCP_TARGET) && | 
 | 		    (ndlp->nlp_flag & NLP_DELAY_TMO)) { | 
 | 			return 0; | 
 | 		} | 
 | 		if (ulp_context == ndlp->nlp_rpi) | 
 | 			return 1; | 
 | 	} | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void | 
 | __lpfc_dequeue_nport_iocbs(struct lpfc_hba *phba, | 
 | 		struct lpfc_nodelist *ndlp, struct lpfc_sli_ring *pring, | 
 | 		struct list_head *dequeue_list) | 
 | { | 
 | 	struct lpfc_iocbq *iocb, *next_iocb; | 
 |  | 
 | 	list_for_each_entry_safe(iocb, next_iocb, &pring->txq, list) { | 
 | 		/* Check to see if iocb matches the nport */ | 
 | 		if (lpfc_check_sli_ndlp(phba, pring, iocb, ndlp)) | 
 | 			/* match, dequeue */ | 
 | 			list_move_tail(&iocb->list, dequeue_list); | 
 | 	} | 
 | } | 
 |  | 
 | static void | 
 | lpfc_sli3_dequeue_nport_iocbs(struct lpfc_hba *phba, | 
 | 		struct lpfc_nodelist *ndlp, struct list_head *dequeue_list) | 
 | { | 
 | 	struct lpfc_sli *psli = &phba->sli; | 
 | 	uint32_t i; | 
 |  | 
 | 	spin_lock_irq(&phba->hbalock); | 
 | 	for (i = 0; i < psli->num_rings; i++) | 
 | 		__lpfc_dequeue_nport_iocbs(phba, ndlp, &psli->sli3_ring[i], | 
 | 						dequeue_list); | 
 | 	spin_unlock_irq(&phba->hbalock); | 
 | } | 
 |  | 
 | static void | 
 | lpfc_sli4_dequeue_nport_iocbs(struct lpfc_hba *phba, | 
 | 		struct lpfc_nodelist *ndlp, struct list_head *dequeue_list) | 
 | { | 
 | 	struct lpfc_sli_ring *pring; | 
 | 	struct lpfc_queue *qp = NULL; | 
 |  | 
 | 	spin_lock_irq(&phba->hbalock); | 
 | 	list_for_each_entry(qp, &phba->sli4_hba.lpfc_wq_list, wq_list) { | 
 | 		pring = qp->pring; | 
 | 		if (!pring) | 
 | 			continue; | 
 | 		spin_lock(&pring->ring_lock); | 
 | 		__lpfc_dequeue_nport_iocbs(phba, ndlp, pring, dequeue_list); | 
 | 		spin_unlock(&pring->ring_lock); | 
 | 	} | 
 | 	spin_unlock_irq(&phba->hbalock); | 
 | } | 
 |  | 
 | /* | 
 |  * Free resources / clean up outstanding I/Os | 
 |  * associated with nlp_rpi in the LPFC_NODELIST entry. | 
 |  */ | 
 | static int | 
 | lpfc_no_rpi(struct lpfc_hba *phba, struct lpfc_nodelist *ndlp) | 
 | { | 
 | 	LIST_HEAD(completions); | 
 |  | 
 | 	lpfc_fabric_abort_nport(ndlp); | 
 |  | 
 | 	/* | 
 | 	 * Everything that matches on txcmplq will be returned | 
 | 	 * by firmware with a no rpi error. | 
 | 	 */ | 
 | 	if (ndlp->nlp_flag & NLP_RPI_REGISTERED) { | 
 | 		if (phba->sli_rev != LPFC_SLI_REV4) | 
 | 			lpfc_sli3_dequeue_nport_iocbs(phba, ndlp, &completions); | 
 | 		else | 
 | 			lpfc_sli4_dequeue_nport_iocbs(phba, ndlp, &completions); | 
 | 	} | 
 |  | 
 | 	/* Cancel all the IOCBs from the completions list */ | 
 | 	lpfc_sli_cancel_iocbs(phba, &completions, IOSTAT_LOCAL_REJECT, | 
 | 			      IOERR_SLI_ABORTED); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | /** | 
 |  * lpfc_nlp_logo_unreg - Unreg mailbox completion handler before LOGO | 
 |  * @phba: Pointer to HBA context object. | 
 |  * @pmb: Pointer to mailbox object. | 
 |  * | 
 |  * This function will issue an ELS LOGO command after completing | 
 |  * the UNREG_RPI. | 
 |  **/ | 
 | static void | 
 | lpfc_nlp_logo_unreg(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) | 
 | { | 
 | 	struct lpfc_vport  *vport = pmb->vport; | 
 | 	struct lpfc_nodelist *ndlp; | 
 |  | 
 | 	ndlp = pmb->ctx_ndlp; | 
 | 	if (!ndlp) | 
 | 		return; | 
 | 	lpfc_issue_els_logo(vport, ndlp, 0); | 
 |  | 
 | 	/* Check to see if there are any deferred events to process */ | 
 | 	if ((ndlp->nlp_flag & NLP_UNREG_INP) && | 
 | 	    (ndlp->nlp_defer_did != NLP_EVT_NOTHING_PENDING)) { | 
 | 		lpfc_printf_vlog(vport, KERN_INFO, LOG_DISCOVERY, | 
 | 				 "1434 UNREG cmpl deferred logo x%x " | 
 | 				 "on NPort x%x Data: x%x x%px\n", | 
 | 				 ndlp->nlp_rpi, ndlp->nlp_DID, | 
 | 				 ndlp->nlp_defer_did, ndlp); | 
 |  | 
 | 		ndlp->nlp_flag &= ~NLP_UNREG_INP; | 
 | 		ndlp->nlp_defer_did = NLP_EVT_NOTHING_PENDING; | 
 | 		lpfc_issue_els_plogi(vport, ndlp->nlp_DID, 0); | 
 | 	} else { | 
 | 		/* NLP_RELEASE_RPI is only set for SLI4 ports. */ | 
 | 		if (ndlp->nlp_flag & NLP_RELEASE_RPI) { | 
 | 			lpfc_sli4_free_rpi(vport->phba, ndlp->nlp_rpi); | 
 | 			spin_lock_irq(&ndlp->lock); | 
 | 			ndlp->nlp_flag &= ~NLP_RELEASE_RPI; | 
 | 			ndlp->nlp_rpi = LPFC_RPI_ALLOC_ERROR; | 
 | 			spin_unlock_irq(&ndlp->lock); | 
 | 		} | 
 | 		spin_lock_irq(&ndlp->lock); | 
 | 		ndlp->nlp_flag &= ~NLP_UNREG_INP; | 
 | 		spin_unlock_irq(&ndlp->lock); | 
 | 	} | 
 |  | 
 | 	/* The node has an outstanding reference for the unreg. Now | 
 | 	 * that the LOGO action and cleanup are finished, release | 
 | 	 * resources. | 
 | 	 */ | 
 | 	lpfc_nlp_put(ndlp); | 
 | 	mempool_free(pmb, phba->mbox_mem_pool); | 
 | } | 
 |  | 
 | /* | 
 |  * Sets the mailbox completion handler to be used for the | 
 |  * unreg_rpi command. The handler varies based on the state of | 
 |  * the port and what will be happening to the rpi next. | 
 |  */ | 
 | static void | 
 | lpfc_set_unreg_login_mbx_cmpl(struct lpfc_hba *phba, struct lpfc_vport *vport, | 
 | 	struct lpfc_nodelist *ndlp, LPFC_MBOXQ_t *mbox) | 
 | { | 
 | 	unsigned long iflags; | 
 |  | 
 | 	/* Driver always gets a reference on the mailbox job | 
 | 	 * in support of async jobs. | 
 | 	 */ | 
 | 	mbox->ctx_ndlp = lpfc_nlp_get(ndlp); | 
 | 	if (!mbox->ctx_ndlp) | 
 | 		return; | 
 |  | 
 | 	if (ndlp->nlp_flag & NLP_ISSUE_LOGO) { | 
 | 		mbox->mbox_cmpl = lpfc_nlp_logo_unreg; | 
 |  | 
 | 	} else if (phba->sli_rev == LPFC_SLI_REV4 && | 
 | 		   !test_bit(FC_UNLOADING, &vport->load_flag) && | 
 | 		    (bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) >= | 
 | 				      LPFC_SLI_INTF_IF_TYPE_2) && | 
 | 		    (kref_read(&ndlp->kref) > 0)) { | 
 | 		mbox->mbox_cmpl = lpfc_sli4_unreg_rpi_cmpl_clr; | 
 | 	} else { | 
 | 		if (test_bit(FC_UNLOADING, &vport->load_flag)) { | 
 | 			if (phba->sli_rev == LPFC_SLI_REV4) { | 
 | 				spin_lock_irqsave(&ndlp->lock, iflags); | 
 | 				ndlp->nlp_flag |= NLP_RELEASE_RPI; | 
 | 				spin_unlock_irqrestore(&ndlp->lock, iflags); | 
 | 			} | 
 | 		} | 
 | 		mbox->mbox_cmpl = lpfc_sli_def_mbox_cmpl; | 
 | 	} | 
 | } | 
 |  | 
 | /* | 
 |  * Free rpi associated with LPFC_NODELIST entry. | 
 |  * This routine is called from lpfc_freenode(), when we are removing | 
 |  * a LPFC_NODELIST entry. It is also called if the driver initiates a | 
 |  * LOGO that completes successfully, and we are waiting to PLOGI back | 
 |  * to the remote NPort. In addition, it is called after we receive | 
 |  * and unsolicated ELS cmd, send back a rsp, the rsp completes and | 
 |  * we are waiting to PLOGI back to the remote NPort. | 
 |  */ | 
 | int | 
 | lpfc_unreg_rpi(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp) | 
 | { | 
 | 	struct lpfc_hba *phba = vport->phba; | 
 | 	LPFC_MBOXQ_t    *mbox; | 
 | 	int rc, acc_plogi = 1; | 
 | 	uint16_t rpi; | 
 |  | 
 | 	if (ndlp->nlp_flag & NLP_RPI_REGISTERED || | 
 | 	    ndlp->nlp_flag & NLP_REG_LOGIN_SEND) { | 
 | 		if (ndlp->nlp_flag & NLP_REG_LOGIN_SEND) | 
 | 			lpfc_printf_vlog(vport, KERN_INFO, | 
 | 					 LOG_NODE | LOG_DISCOVERY, | 
 | 					 "3366 RPI x%x needs to be " | 
 | 					 "unregistered nlp_flag x%x " | 
 | 					 "did x%x\n", | 
 | 					 ndlp->nlp_rpi, ndlp->nlp_flag, | 
 | 					 ndlp->nlp_DID); | 
 |  | 
 | 		/* If there is already an UNREG in progress for this ndlp, | 
 | 		 * no need to queue up another one. | 
 | 		 */ | 
 | 		if (ndlp->nlp_flag & NLP_UNREG_INP) { | 
 | 			lpfc_printf_vlog(vport, KERN_INFO, | 
 | 					 LOG_NODE | LOG_DISCOVERY, | 
 | 					 "1436 unreg_rpi SKIP UNREG x%x on " | 
 | 					 "NPort x%x deferred x%x  flg x%x " | 
 | 					 "Data: x%px\n", | 
 | 					 ndlp->nlp_rpi, ndlp->nlp_DID, | 
 | 					 ndlp->nlp_defer_did, | 
 | 					 ndlp->nlp_flag, ndlp); | 
 | 			goto out; | 
 | 		} | 
 |  | 
 | 		mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); | 
 | 		if (mbox) { | 
 | 			/* SLI4 ports require the physical rpi value. */ | 
 | 			rpi = ndlp->nlp_rpi; | 
 | 			if (phba->sli_rev == LPFC_SLI_REV4) | 
 | 				rpi = phba->sli4_hba.rpi_ids[ndlp->nlp_rpi]; | 
 |  | 
 | 			lpfc_unreg_login(phba, vport->vpi, rpi, mbox); | 
 | 			mbox->vport = vport; | 
 | 			lpfc_set_unreg_login_mbx_cmpl(phba, vport, ndlp, mbox); | 
 | 			if (!mbox->ctx_ndlp) { | 
 | 				mempool_free(mbox, phba->mbox_mem_pool); | 
 | 				return 1; | 
 | 			} | 
 |  | 
 | 			if (mbox->mbox_cmpl == lpfc_sli4_unreg_rpi_cmpl_clr) | 
 | 				/* | 
 | 				 * accept PLOGIs after unreg_rpi_cmpl | 
 | 				 */ | 
 | 				acc_plogi = 0; | 
 | 			if (((ndlp->nlp_DID & Fabric_DID_MASK) != | 
 | 			    Fabric_DID_MASK) && | 
 | 			    (!test_bit(FC_OFFLINE_MODE, &vport->fc_flag))) | 
 | 				ndlp->nlp_flag |= NLP_UNREG_INP; | 
 |  | 
 | 			lpfc_printf_vlog(vport, KERN_INFO, | 
 | 					 LOG_NODE | LOG_DISCOVERY, | 
 | 					 "1433 unreg_rpi UNREG x%x on " | 
 | 					 "NPort x%x deferred flg x%x " | 
 | 					 "Data:x%px\n", | 
 | 					 ndlp->nlp_rpi, ndlp->nlp_DID, | 
 | 					 ndlp->nlp_flag, ndlp); | 
 |  | 
 | 			rc = lpfc_sli_issue_mbox(phba, mbox, MBX_NOWAIT); | 
 | 			if (rc == MBX_NOT_FINISHED) { | 
 | 				ndlp->nlp_flag &= ~NLP_UNREG_INP; | 
 | 				mempool_free(mbox, phba->mbox_mem_pool); | 
 | 				acc_plogi = 1; | 
 | 				lpfc_nlp_put(ndlp); | 
 | 			} | 
 | 		} else { | 
 | 			lpfc_printf_vlog(vport, KERN_INFO, | 
 | 					 LOG_NODE | LOG_DISCOVERY, | 
 | 					 "1444 Failed to allocate mempool " | 
 | 					 "unreg_rpi UNREG x%x, " | 
 | 					 "DID x%x, flag x%x, " | 
 | 					 "ndlp x%px\n", | 
 | 					 ndlp->nlp_rpi, ndlp->nlp_DID, | 
 | 					 ndlp->nlp_flag, ndlp); | 
 |  | 
 | 			/* Because mempool_alloc failed, we | 
 | 			 * will issue a LOGO here and keep the rpi alive if | 
 | 			 * not unloading. | 
 | 			 */ | 
 | 			if (!test_bit(FC_UNLOADING, &vport->load_flag)) { | 
 | 				ndlp->nlp_flag &= ~NLP_UNREG_INP; | 
 | 				lpfc_issue_els_logo(vport, ndlp, 0); | 
 | 				ndlp->nlp_prev_state = ndlp->nlp_state; | 
 | 				lpfc_nlp_set_state(vport, ndlp, | 
 | 						   NLP_STE_NPR_NODE); | 
 | 			} | 
 |  | 
 | 			return 1; | 
 | 		} | 
 | 		lpfc_no_rpi(phba, ndlp); | 
 | out: | 
 | 		if (phba->sli_rev != LPFC_SLI_REV4) | 
 | 			ndlp->nlp_rpi = 0; | 
 | 		ndlp->nlp_flag &= ~NLP_RPI_REGISTERED; | 
 | 		ndlp->nlp_flag &= ~NLP_NPR_ADISC; | 
 | 		if (acc_plogi) | 
 | 			ndlp->nlp_flag &= ~NLP_LOGO_ACC; | 
 | 		return 1; | 
 | 	} | 
 | 	ndlp->nlp_flag &= ~NLP_LOGO_ACC; | 
 | 	return 0; | 
 | } | 
 |  | 
 | /** | 
 |  * lpfc_unreg_hba_rpis - Unregister rpis registered to the hba. | 
 |  * @phba: pointer to lpfc hba data structure. | 
 |  * | 
 |  * This routine is invoked to unregister all the currently registered RPIs | 
 |  * to the HBA. | 
 |  **/ | 
 | void | 
 | lpfc_unreg_hba_rpis(struct lpfc_hba *phba) | 
 | { | 
 | 	struct lpfc_vport **vports; | 
 | 	struct lpfc_nodelist *ndlp; | 
 | 	int i; | 
 | 	unsigned long iflags; | 
 |  | 
 | 	vports = lpfc_create_vport_work_array(phba); | 
 | 	if (!vports) { | 
 | 		lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, | 
 | 				"2884 Vport array allocation failed \n"); | 
 | 		return; | 
 | 	} | 
 | 	for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) { | 
 | 		spin_lock_irqsave(&vports[i]->fc_nodes_list_lock, iflags); | 
 | 		list_for_each_entry(ndlp, &vports[i]->fc_nodes, nlp_listp) { | 
 | 			if (ndlp->nlp_flag & NLP_RPI_REGISTERED) { | 
 | 				/* The mempool_alloc might sleep */ | 
 | 				spin_unlock_irqrestore(&vports[i]->fc_nodes_list_lock, | 
 | 						       iflags); | 
 | 				lpfc_unreg_rpi(vports[i], ndlp); | 
 | 				spin_lock_irqsave(&vports[i]->fc_nodes_list_lock, | 
 | 						  iflags); | 
 | 			} | 
 | 		} | 
 | 		spin_unlock_irqrestore(&vports[i]->fc_nodes_list_lock, iflags); | 
 | 	} | 
 | 	lpfc_destroy_vport_work_array(phba, vports); | 
 | } | 
 |  | 
 | void | 
 | lpfc_unreg_all_rpis(struct lpfc_vport *vport) | 
 | { | 
 | 	struct lpfc_hba  *phba  = vport->phba; | 
 | 	LPFC_MBOXQ_t     *mbox; | 
 | 	int rc; | 
 |  | 
 | 	if (phba->sli_rev == LPFC_SLI_REV4) { | 
 | 		lpfc_sli4_unreg_all_rpis(vport); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); | 
 | 	if (mbox) { | 
 | 		lpfc_unreg_login(phba, vport->vpi, LPFC_UNREG_ALL_RPIS_VPORT, | 
 | 				 mbox); | 
 | 		mbox->vport = vport; | 
 | 		mbox->mbox_cmpl = lpfc_sli_def_mbox_cmpl; | 
 | 		mbox->ctx_ndlp = NULL; | 
 | 		rc = lpfc_sli_issue_mbox_wait(phba, mbox, LPFC_MBOX_TMO); | 
 | 		if (rc != MBX_TIMEOUT) | 
 | 			mempool_free(mbox, phba->mbox_mem_pool); | 
 |  | 
 | 		if ((rc == MBX_TIMEOUT) || (rc == MBX_NOT_FINISHED)) | 
 | 			lpfc_printf_vlog(vport, KERN_ERR, LOG_TRACE_EVENT, | 
 | 					 "1836 Could not issue " | 
 | 					 "unreg_login(all_rpis) status %d\n", | 
 | 					 rc); | 
 | 	} | 
 | } | 
 |  | 
 | void | 
 | lpfc_unreg_default_rpis(struct lpfc_vport *vport) | 
 | { | 
 | 	struct lpfc_hba  *phba  = vport->phba; | 
 | 	LPFC_MBOXQ_t     *mbox; | 
 | 	int rc; | 
 |  | 
 | 	/* Unreg DID is an SLI3 operation. */ | 
 | 	if (phba->sli_rev > LPFC_SLI_REV3) | 
 | 		return; | 
 |  | 
 | 	mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); | 
 | 	if (mbox) { | 
 | 		lpfc_unreg_did(phba, vport->vpi, LPFC_UNREG_ALL_DFLT_RPIS, | 
 | 			       mbox); | 
 | 		mbox->vport = vport; | 
 | 		mbox->mbox_cmpl = lpfc_sli_def_mbox_cmpl; | 
 | 		mbox->ctx_ndlp = NULL; | 
 | 		rc = lpfc_sli_issue_mbox_wait(phba, mbox, LPFC_MBOX_TMO); | 
 | 		if (rc != MBX_TIMEOUT) | 
 | 			mempool_free(mbox, phba->mbox_mem_pool); | 
 |  | 
 | 		if ((rc == MBX_TIMEOUT) || (rc == MBX_NOT_FINISHED)) | 
 | 			lpfc_printf_vlog(vport, KERN_ERR, LOG_TRACE_EVENT, | 
 | 					 "1815 Could not issue " | 
 | 					 "unreg_did (default rpis) status %d\n", | 
 | 					 rc); | 
 | 	} | 
 | } | 
 |  | 
 | /* | 
 |  * Free resources associated with LPFC_NODELIST entry | 
 |  * so it can be freed. | 
 |  */ | 
 | static int | 
 | lpfc_cleanup_node(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp) | 
 | { | 
 | 	struct lpfc_hba  *phba = vport->phba; | 
 | 	LPFC_MBOXQ_t *mb, *nextmb; | 
 |  | 
 | 	/* Cleanup node for NPort <nlp_DID> */ | 
 | 	lpfc_printf_vlog(vport, KERN_INFO, LOG_NODE, | 
 | 			 "0900 Cleanup node for NPort x%x " | 
 | 			 "Data: x%x x%x x%x\n", | 
 | 			 ndlp->nlp_DID, ndlp->nlp_flag, | 
 | 			 ndlp->nlp_state, ndlp->nlp_rpi); | 
 | 	lpfc_dequeue_node(vport, ndlp); | 
 |  | 
 | 	/* Don't need to clean up REG_LOGIN64 cmds for Default RPI cleanup */ | 
 |  | 
 | 	/* cleanup any ndlp on mbox q waiting for reglogin cmpl */ | 
 | 	if ((mb = phba->sli.mbox_active)) { | 
 | 		if ((mb->u.mb.mbxCommand == MBX_REG_LOGIN64) && | 
 | 		   !(mb->mbox_flag & LPFC_MBX_IMED_UNREG) && | 
 | 		   (ndlp == mb->ctx_ndlp)) { | 
 | 			mb->ctx_ndlp = NULL; | 
 | 			mb->mbox_cmpl = lpfc_sli_def_mbox_cmpl; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	spin_lock_irq(&phba->hbalock); | 
 | 	/* Cleanup REG_LOGIN completions which are not yet processed */ | 
 | 	list_for_each_entry(mb, &phba->sli.mboxq_cmpl, list) { | 
 | 		if ((mb->u.mb.mbxCommand != MBX_REG_LOGIN64) || | 
 | 			(mb->mbox_flag & LPFC_MBX_IMED_UNREG) || | 
 | 			(ndlp != mb->ctx_ndlp)) | 
 | 			continue; | 
 |  | 
 | 		mb->ctx_ndlp = NULL; | 
 | 		mb->mbox_cmpl = lpfc_sli_def_mbox_cmpl; | 
 | 	} | 
 |  | 
 | 	list_for_each_entry_safe(mb, nextmb, &phba->sli.mboxq, list) { | 
 | 		if ((mb->u.mb.mbxCommand == MBX_REG_LOGIN64) && | 
 | 		   !(mb->mbox_flag & LPFC_MBX_IMED_UNREG) && | 
 | 		    (ndlp == mb->ctx_ndlp)) { | 
 | 			list_del(&mb->list); | 
 | 			lpfc_mbox_rsrc_cleanup(phba, mb, MBOX_THD_LOCKED); | 
 |  | 
 | 			/* Don't invoke lpfc_nlp_put. The driver is in | 
 | 			 * lpfc_nlp_release context. | 
 | 			 */ | 
 | 		} | 
 | 	} | 
 | 	spin_unlock_irq(&phba->hbalock); | 
 |  | 
 | 	lpfc_els_abort(phba, ndlp); | 
 |  | 
 | 	spin_lock_irq(&ndlp->lock); | 
 | 	ndlp->nlp_flag &= ~NLP_DELAY_TMO; | 
 | 	spin_unlock_irq(&ndlp->lock); | 
 |  | 
 | 	ndlp->nlp_last_elscmd = 0; | 
 | 	del_timer_sync(&ndlp->nlp_delayfunc); | 
 |  | 
 | 	list_del_init(&ndlp->els_retry_evt.evt_listp); | 
 | 	list_del_init(&ndlp->dev_loss_evt.evt_listp); | 
 | 	list_del_init(&ndlp->recovery_evt.evt_listp); | 
 | 	lpfc_cleanup_vports_rrqs(vport, ndlp); | 
 |  | 
 | 	if (phba->sli_rev == LPFC_SLI_REV4) | 
 | 		ndlp->nlp_flag |= NLP_RELEASE_RPI; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int | 
 | lpfc_matchdid(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp, | 
 | 	      uint32_t did) | 
 | { | 
 | 	D_ID mydid, ndlpdid, matchdid; | 
 |  | 
 | 	if (did == Bcast_DID) | 
 | 		return 0; | 
 |  | 
 | 	/* First check for Direct match */ | 
 | 	if (ndlp->nlp_DID == did) | 
 | 		return 1; | 
 |  | 
 | 	/* Next check for area/domain identically equals 0 match */ | 
 | 	mydid.un.word = vport->fc_myDID; | 
 | 	if ((mydid.un.b.domain == 0) && (mydid.un.b.area == 0)) { | 
 | 		return 0; | 
 | 	} | 
 |  | 
 | 	matchdid.un.word = did; | 
 | 	ndlpdid.un.word = ndlp->nlp_DID; | 
 | 	if (matchdid.un.b.id == ndlpdid.un.b.id) { | 
 | 		if ((mydid.un.b.domain == matchdid.un.b.domain) && | 
 | 		    (mydid.un.b.area == matchdid.un.b.area)) { | 
 | 			/* This code is supposed to match the ID | 
 | 			 * for a private loop device that is | 
 | 			 * connect to fl_port. But we need to | 
 | 			 * check that the port did not just go | 
 | 			 * from pt2pt to fabric or we could end | 
 | 			 * up matching ndlp->nlp_DID 000001 to | 
 | 			 * fabric DID 0x20101 | 
 | 			 */ | 
 | 			if ((ndlpdid.un.b.domain == 0) && | 
 | 			    (ndlpdid.un.b.area == 0)) { | 
 | 				if (ndlpdid.un.b.id && | 
 | 				    vport->phba->fc_topology == | 
 | 				    LPFC_TOPOLOGY_LOOP) | 
 | 					return 1; | 
 | 			} | 
 | 			return 0; | 
 | 		} | 
 |  | 
 | 		matchdid.un.word = ndlp->nlp_DID; | 
 | 		if ((mydid.un.b.domain == ndlpdid.un.b.domain) && | 
 | 		    (mydid.un.b.area == ndlpdid.un.b.area)) { | 
 | 			if ((matchdid.un.b.domain == 0) && | 
 | 			    (matchdid.un.b.area == 0)) { | 
 | 				if (matchdid.un.b.id) | 
 | 					return 1; | 
 | 			} | 
 | 		} | 
 | 	} | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* Search for a nodelist entry */ | 
 | static struct lpfc_nodelist * | 
 | __lpfc_findnode_did(struct lpfc_vport *vport, uint32_t did) | 
 | { | 
 | 	struct lpfc_nodelist *ndlp; | 
 | 	uint32_t data1; | 
 |  | 
 | 	list_for_each_entry(ndlp, &vport->fc_nodes, nlp_listp) { | 
 | 		if (lpfc_matchdid(vport, ndlp, did)) { | 
 | 			data1 = (((uint32_t)ndlp->nlp_state << 24) | | 
 | 				 ((uint32_t)ndlp->nlp_xri << 16) | | 
 | 				 ((uint32_t)ndlp->nlp_type << 8) | 
 | 				 ); | 
 | 			lpfc_printf_vlog(vport, KERN_INFO, LOG_NODE_VERBOSE, | 
 | 					 "0929 FIND node DID " | 
 | 					 "Data: x%px x%x x%x x%x x%x x%px\n", | 
 | 					 ndlp, ndlp->nlp_DID, | 
 | 					 ndlp->nlp_flag, data1, ndlp->nlp_rpi, | 
 | 					 ndlp->active_rrqs_xri_bitmap); | 
 | 			return ndlp; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	/* FIND node did <did> NOT FOUND */ | 
 | 	lpfc_printf_vlog(vport, KERN_INFO, LOG_NODE, | 
 | 			 "0932 FIND node did x%x NOT FOUND.\n", did); | 
 | 	return NULL; | 
 | } | 
 |  | 
 | struct lpfc_nodelist * | 
 | lpfc_findnode_did(struct lpfc_vport *vport, uint32_t did) | 
 | { | 
 | 	struct Scsi_Host *shost = lpfc_shost_from_vport(vport); | 
 | 	struct lpfc_nodelist *ndlp; | 
 | 	unsigned long iflags; | 
 |  | 
 | 	spin_lock_irqsave(shost->host_lock, iflags); | 
 | 	ndlp = __lpfc_findnode_did(vport, did); | 
 | 	spin_unlock_irqrestore(shost->host_lock, iflags); | 
 | 	return ndlp; | 
 | } | 
 |  | 
 | struct lpfc_nodelist * | 
 | lpfc_findnode_mapped(struct lpfc_vport *vport) | 
 | { | 
 | 	struct lpfc_nodelist *ndlp; | 
 | 	uint32_t data1; | 
 | 	unsigned long iflags; | 
 |  | 
 | 	spin_lock_irqsave(&vport->fc_nodes_list_lock, iflags); | 
 |  | 
 | 	list_for_each_entry(ndlp, &vport->fc_nodes, nlp_listp) { | 
 | 		if (ndlp->nlp_state == NLP_STE_UNMAPPED_NODE || | 
 | 		    ndlp->nlp_state == NLP_STE_MAPPED_NODE) { | 
 | 			data1 = (((uint32_t)ndlp->nlp_state << 24) | | 
 | 				 ((uint32_t)ndlp->nlp_xri << 16) | | 
 | 				 ((uint32_t)ndlp->nlp_type << 8) | | 
 | 				 ((uint32_t)ndlp->nlp_rpi & 0xff)); | 
 | 			spin_unlock_irqrestore(&vport->fc_nodes_list_lock, | 
 | 					       iflags); | 
 | 			lpfc_printf_vlog(vport, KERN_INFO, LOG_NODE_VERBOSE, | 
 | 					 "2025 FIND node DID MAPPED " | 
 | 					 "Data: x%px x%x x%x x%x x%px\n", | 
 | 					 ndlp, ndlp->nlp_DID, | 
 | 					 ndlp->nlp_flag, data1, | 
 | 					 ndlp->active_rrqs_xri_bitmap); | 
 | 			return ndlp; | 
 | 		} | 
 | 	} | 
 | 	spin_unlock_irqrestore(&vport->fc_nodes_list_lock, iflags); | 
 |  | 
 | 	/* FIND node did <did> NOT FOUND */ | 
 | 	lpfc_printf_vlog(vport, KERN_INFO, LOG_NODE, | 
 | 			 "2026 FIND mapped did NOT FOUND.\n"); | 
 | 	return NULL; | 
 | } | 
 |  | 
 | struct lpfc_nodelist * | 
 | lpfc_setup_disc_node(struct lpfc_vport *vport, uint32_t did) | 
 | { | 
 | 	struct lpfc_nodelist *ndlp; | 
 |  | 
 | 	ndlp = lpfc_findnode_did(vport, did); | 
 | 	if (!ndlp) { | 
 | 		if (vport->phba->nvmet_support) | 
 | 			return NULL; | 
 | 		if (test_bit(FC_RSCN_MODE, &vport->fc_flag) && | 
 | 		    lpfc_rscn_payload_check(vport, did) == 0) | 
 | 			return NULL; | 
 | 		ndlp = lpfc_nlp_init(vport, did); | 
 | 		if (!ndlp) | 
 | 			return NULL; | 
 | 		lpfc_nlp_set_state(vport, ndlp, NLP_STE_NPR_NODE); | 
 |  | 
 | 		lpfc_printf_vlog(vport, KERN_INFO, LOG_DISCOVERY, | 
 | 				 "6453 Setup New Node 2B_DISC x%x " | 
 | 				 "Data:x%x x%x x%lx\n", | 
 | 				 ndlp->nlp_DID, ndlp->nlp_flag, | 
 | 				 ndlp->nlp_state, vport->fc_flag); | 
 |  | 
 | 		spin_lock_irq(&ndlp->lock); | 
 | 		ndlp->nlp_flag |= NLP_NPR_2B_DISC; | 
 | 		spin_unlock_irq(&ndlp->lock); | 
 | 		return ndlp; | 
 | 	} | 
 |  | 
 | 	/* The NVME Target does not want to actively manage an rport. | 
 | 	 * The goal is to allow the target to reset its state and clear | 
 | 	 * pending IO in preparation for the initiator to recover. | 
 | 	 */ | 
 | 	if (test_bit(FC_RSCN_MODE, &vport->fc_flag) && | 
 | 	    !test_bit(FC_NDISC_ACTIVE, &vport->fc_flag)) { | 
 | 		if (lpfc_rscn_payload_check(vport, did)) { | 
 |  | 
 | 			/* Since this node is marked for discovery, | 
 | 			 * delay timeout is not needed. | 
 | 			 */ | 
 | 			lpfc_cancel_retry_delay_tmo(vport, ndlp); | 
 |  | 
 | 			lpfc_printf_vlog(vport, KERN_INFO, LOG_DISCOVERY, | 
 | 					 "6455 Setup RSCN Node 2B_DISC x%x " | 
 | 					 "Data:x%x x%x x%lx\n", | 
 | 					 ndlp->nlp_DID, ndlp->nlp_flag, | 
 | 					 ndlp->nlp_state, vport->fc_flag); | 
 |  | 
 | 			/* NVME Target mode waits until rport is known to be | 
 | 			 * impacted by the RSCN before it transitions.  No | 
 | 			 * active management - just go to NPR provided the | 
 | 			 * node had a valid login. | 
 | 			 */ | 
 | 			if (vport->phba->nvmet_support) | 
 | 				return ndlp; | 
 |  | 
 | 			if (ndlp->nlp_state > NLP_STE_UNUSED_NODE && | 
 | 			    ndlp->nlp_state <= NLP_STE_PRLI_ISSUE) { | 
 | 				lpfc_disc_state_machine(vport, ndlp, NULL, | 
 | 							NLP_EVT_DEVICE_RECOVERY); | 
 | 			} | 
 |  | 
 | 			spin_lock_irq(&ndlp->lock); | 
 | 			ndlp->nlp_flag |= NLP_NPR_2B_DISC; | 
 | 			spin_unlock_irq(&ndlp->lock); | 
 | 		} else { | 
 | 			lpfc_printf_vlog(vport, KERN_INFO, LOG_DISCOVERY, | 
 | 					 "6456 Skip Setup RSCN Node x%x " | 
 | 					 "Data:x%x x%x x%lx\n", | 
 | 					 ndlp->nlp_DID, ndlp->nlp_flag, | 
 | 					 ndlp->nlp_state, vport->fc_flag); | 
 | 			ndlp = NULL; | 
 | 		} | 
 | 	} else { | 
 | 		lpfc_printf_vlog(vport, KERN_INFO, LOG_DISCOVERY, | 
 | 				 "6457 Setup Active Node 2B_DISC x%x " | 
 | 				 "Data:x%x x%x x%lx\n", | 
 | 				 ndlp->nlp_DID, ndlp->nlp_flag, | 
 | 				 ndlp->nlp_state, vport->fc_flag); | 
 |  | 
 | 		/* If the initiator received a PLOGI from this NPort or if the | 
 | 		 * initiator is already in the process of discovery on it, | 
 | 		 * there's no need to try to discover it again. | 
 | 		 */ | 
 | 		if (ndlp->nlp_state == NLP_STE_ADISC_ISSUE || | 
 | 		    ndlp->nlp_state == NLP_STE_PLOGI_ISSUE || | 
 | 		    (!vport->phba->nvmet_support && | 
 | 		     ndlp->nlp_flag & NLP_RCV_PLOGI)) | 
 | 			return NULL; | 
 |  | 
 | 		if (vport->phba->nvmet_support) | 
 | 			return ndlp; | 
 |  | 
 | 		/* Moving to NPR state clears unsolicited flags and | 
 | 		 * allows for rediscovery | 
 | 		 */ | 
 | 		lpfc_nlp_set_state(vport, ndlp, NLP_STE_NPR_NODE); | 
 |  | 
 | 		spin_lock_irq(&ndlp->lock); | 
 | 		ndlp->nlp_flag |= NLP_NPR_2B_DISC; | 
 | 		spin_unlock_irq(&ndlp->lock); | 
 | 	} | 
 | 	return ndlp; | 
 | } | 
 |  | 
 | /* Build a list of nodes to discover based on the loopmap */ | 
 | void | 
 | lpfc_disc_list_loopmap(struct lpfc_vport *vport) | 
 | { | 
 | 	struct lpfc_hba  *phba = vport->phba; | 
 | 	int j; | 
 | 	uint32_t alpa, index; | 
 |  | 
 | 	if (!lpfc_is_link_up(phba)) | 
 | 		return; | 
 |  | 
 | 	if (phba->fc_topology != LPFC_TOPOLOGY_LOOP) | 
 | 		return; | 
 |  | 
 | 	/* Check for loop map present or not */ | 
 | 	if (phba->alpa_map[0]) { | 
 | 		for (j = 1; j <= phba->alpa_map[0]; j++) { | 
 | 			alpa = phba->alpa_map[j]; | 
 | 			if (((vport->fc_myDID & 0xff) == alpa) || (alpa == 0)) | 
 | 				continue; | 
 | 			lpfc_setup_disc_node(vport, alpa); | 
 | 		} | 
 | 	} else { | 
 | 		/* No alpamap, so try all alpa's */ | 
 | 		for (j = 0; j < FC_MAXLOOP; j++) { | 
 | 			/* If cfg_scan_down is set, start from highest | 
 | 			 * ALPA (0xef) to lowest (0x1). | 
 | 			 */ | 
 | 			if (vport->cfg_scan_down) | 
 | 				index = j; | 
 | 			else | 
 | 				index = FC_MAXLOOP - j - 1; | 
 | 			alpa = lpfcAlpaArray[index]; | 
 | 			if ((vport->fc_myDID & 0xff) == alpa) | 
 | 				continue; | 
 | 			lpfc_setup_disc_node(vport, alpa); | 
 | 		} | 
 | 	} | 
 | 	return; | 
 | } | 
 |  | 
 | /* SLI3 only */ | 
 | void | 
 | lpfc_issue_clear_la(struct lpfc_hba *phba, struct lpfc_vport *vport) | 
 | { | 
 | 	LPFC_MBOXQ_t *mbox; | 
 | 	struct lpfc_sli *psli = &phba->sli; | 
 | 	struct lpfc_sli_ring *extra_ring = &psli->sli3_ring[LPFC_EXTRA_RING]; | 
 | 	struct lpfc_sli_ring *fcp_ring   = &psli->sli3_ring[LPFC_FCP_RING]; | 
 | 	int  rc; | 
 |  | 
 | 	/* | 
 | 	 * if it's not a physical port or if we already send | 
 | 	 * clear_la then don't send it. | 
 | 	 */ | 
 | 	if ((phba->link_state >= LPFC_CLEAR_LA) || | 
 | 	    (vport->port_type != LPFC_PHYSICAL_PORT) || | 
 | 		(phba->sli_rev == LPFC_SLI_REV4)) | 
 | 		return; | 
 |  | 
 | 			/* Link up discovery */ | 
 | 	if ((mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL)) != NULL) { | 
 | 		phba->link_state = LPFC_CLEAR_LA; | 
 | 		lpfc_clear_la(phba, mbox); | 
 | 		mbox->mbox_cmpl = lpfc_mbx_cmpl_clear_la; | 
 | 		mbox->vport = vport; | 
 | 		rc = lpfc_sli_issue_mbox(phba, mbox, MBX_NOWAIT); | 
 | 		if (rc == MBX_NOT_FINISHED) { | 
 | 			mempool_free(mbox, phba->mbox_mem_pool); | 
 | 			lpfc_disc_flush_list(vport); | 
 | 			extra_ring->flag &= ~LPFC_STOP_IOCB_EVENT; | 
 | 			fcp_ring->flag &= ~LPFC_STOP_IOCB_EVENT; | 
 | 			phba->link_state = LPFC_HBA_ERROR; | 
 | 		} | 
 | 	} | 
 | } | 
 |  | 
 | /* Reg_vpi to tell firmware to resume normal operations */ | 
 | void | 
 | lpfc_issue_reg_vpi(struct lpfc_hba *phba, struct lpfc_vport *vport) | 
 | { | 
 | 	LPFC_MBOXQ_t *regvpimbox; | 
 |  | 
 | 	regvpimbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); | 
 | 	if (regvpimbox) { | 
 | 		lpfc_reg_vpi(vport, regvpimbox); | 
 | 		regvpimbox->mbox_cmpl = lpfc_mbx_cmpl_reg_vpi; | 
 | 		regvpimbox->vport = vport; | 
 | 		if (lpfc_sli_issue_mbox(phba, regvpimbox, MBX_NOWAIT) | 
 | 					== MBX_NOT_FINISHED) { | 
 | 			mempool_free(regvpimbox, phba->mbox_mem_pool); | 
 | 		} | 
 | 	} | 
 | } | 
 |  | 
 | /* Start Link up / RSCN discovery on NPR nodes */ | 
 | void | 
 | lpfc_disc_start(struct lpfc_vport *vport) | 
 | { | 
 | 	struct lpfc_hba  *phba = vport->phba; | 
 | 	uint32_t num_sent; | 
 | 	uint32_t clear_la_pending; | 
 |  | 
 | 	if (!lpfc_is_link_up(phba)) { | 
 | 		lpfc_printf_vlog(vport, KERN_INFO, LOG_SLI, | 
 | 				 "3315 Link is not up %x\n", | 
 | 				 phba->link_state); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	if (phba->link_state == LPFC_CLEAR_LA) | 
 | 		clear_la_pending = 1; | 
 | 	else | 
 | 		clear_la_pending = 0; | 
 |  | 
 | 	if (vport->port_state < LPFC_VPORT_READY) | 
 | 		vport->port_state = LPFC_DISC_AUTH; | 
 |  | 
 | 	lpfc_set_disctmo(vport); | 
 |  | 
 | 	vport->fc_prevDID = vport->fc_myDID; | 
 | 	vport->num_disc_nodes = 0; | 
 |  | 
 | 	/* Start Discovery state <hba_state> */ | 
 | 	lpfc_printf_vlog(vport, KERN_INFO, LOG_DISCOVERY, | 
 | 			 "0202 Start Discovery port state x%x " | 
 | 			 "flg x%lx Data: x%x x%x x%x\n", | 
 | 			 vport->port_state, vport->fc_flag, | 
 | 			 atomic_read(&vport->fc_plogi_cnt), | 
 | 			 atomic_read(&vport->fc_adisc_cnt), | 
 | 			 atomic_read(&vport->fc_npr_cnt)); | 
 |  | 
 | 	/* First do ADISCs - if any */ | 
 | 	num_sent = lpfc_els_disc_adisc(vport); | 
 |  | 
 | 	if (num_sent) | 
 | 		return; | 
 |  | 
 | 	/* Register the VPI for SLI3, NPIV only. */ | 
 | 	if ((phba->sli3_options & LPFC_SLI3_NPIV_ENABLED) && | 
 | 	    !test_bit(FC_PT2PT, &vport->fc_flag) && | 
 | 	    !test_bit(FC_RSCN_MODE, &vport->fc_flag) && | 
 | 	    (phba->sli_rev < LPFC_SLI_REV4)) { | 
 | 		lpfc_issue_clear_la(phba, vport); | 
 | 		lpfc_issue_reg_vpi(phba, vport); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * For SLI2, we need to set port_state to READY and continue | 
 | 	 * discovery. | 
 | 	 */ | 
 | 	if (vport->port_state < LPFC_VPORT_READY && !clear_la_pending) { | 
 | 		/* If we get here, there is nothing to ADISC */ | 
 | 		lpfc_issue_clear_la(phba, vport); | 
 |  | 
 | 		if (!test_bit(FC_ABORT_DISCOVERY, &vport->fc_flag)) { | 
 | 			vport->num_disc_nodes = 0; | 
 | 			/* go thru NPR nodes and issue ELS PLOGIs */ | 
 | 			if (atomic_read(&vport->fc_npr_cnt)) | 
 | 				lpfc_els_disc_plogi(vport); | 
 |  | 
 | 			if (!vport->num_disc_nodes) { | 
 | 				clear_bit(FC_NDISC_ACTIVE, &vport->fc_flag); | 
 | 				lpfc_can_disctmo(vport); | 
 | 			} | 
 | 		} | 
 | 		vport->port_state = LPFC_VPORT_READY; | 
 | 	} else { | 
 | 		/* Next do PLOGIs - if any */ | 
 | 		num_sent = lpfc_els_disc_plogi(vport); | 
 |  | 
 | 		if (num_sent) | 
 | 			return; | 
 |  | 
 | 		if (test_bit(FC_RSCN_MODE, &vport->fc_flag)) { | 
 | 			/* Check to see if more RSCNs came in while we | 
 | 			 * were processing this one. | 
 | 			 */ | 
 | 			if (vport->fc_rscn_id_cnt == 0 && | 
 | 			    !test_bit(FC_RSCN_DISCOVERY, &vport->fc_flag)) { | 
 | 				clear_bit(FC_RSCN_MODE, &vport->fc_flag); | 
 | 				lpfc_can_disctmo(vport); | 
 | 			} else { | 
 | 				lpfc_els_handle_rscn(vport); | 
 | 			} | 
 | 		} | 
 | 	} | 
 | 	return; | 
 | } | 
 |  | 
 | /* | 
 |  *  Ignore completion for all IOCBs on tx and txcmpl queue for ELS | 
 |  *  ring the match the sppecified nodelist. | 
 |  */ | 
 | static void | 
 | lpfc_free_tx(struct lpfc_hba *phba, struct lpfc_nodelist *ndlp) | 
 | { | 
 | 	LIST_HEAD(completions); | 
 | 	struct lpfc_iocbq    *iocb, *next_iocb; | 
 | 	struct lpfc_sli_ring *pring; | 
 | 	u32 ulp_command; | 
 |  | 
 | 	pring = lpfc_phba_elsring(phba); | 
 | 	if (unlikely(!pring)) | 
 | 		return; | 
 |  | 
 | 	/* Error matching iocb on txq or txcmplq | 
 | 	 * First check the txq. | 
 | 	 */ | 
 | 	spin_lock_irq(&phba->hbalock); | 
 | 	list_for_each_entry_safe(iocb, next_iocb, &pring->txq, list) { | 
 | 		if (iocb->ndlp != ndlp) | 
 | 			continue; | 
 |  | 
 | 		ulp_command = get_job_cmnd(phba, iocb); | 
 |  | 
 | 		if (ulp_command == CMD_ELS_REQUEST64_CR || | 
 | 		    ulp_command == CMD_XMIT_ELS_RSP64_CX) { | 
 |  | 
 | 			list_move_tail(&iocb->list, &completions); | 
 | 		} | 
 | 	} | 
 |  | 
 | 	/* Next check the txcmplq */ | 
 | 	list_for_each_entry_safe(iocb, next_iocb, &pring->txcmplq, list) { | 
 | 		if (iocb->ndlp != ndlp) | 
 | 			continue; | 
 |  | 
 | 		ulp_command = get_job_cmnd(phba, iocb); | 
 |  | 
 | 		if (ulp_command == CMD_ELS_REQUEST64_CR || | 
 | 		    ulp_command == CMD_XMIT_ELS_RSP64_CX) { | 
 | 			lpfc_sli_issue_abort_iotag(phba, pring, iocb, NULL); | 
 | 		} | 
 | 	} | 
 | 	spin_unlock_irq(&phba->hbalock); | 
 |  | 
 | 	/* Make sure HBA is alive */ | 
 | 	lpfc_issue_hb_tmo(phba); | 
 |  | 
 | 	/* Cancel all the IOCBs from the completions list */ | 
 | 	lpfc_sli_cancel_iocbs(phba, &completions, IOSTAT_LOCAL_REJECT, | 
 | 			      IOERR_SLI_ABORTED); | 
 | } | 
 |  | 
 | static void | 
 | lpfc_disc_flush_list(struct lpfc_vport *vport) | 
 | { | 
 | 	struct lpfc_nodelist *ndlp, *next_ndlp; | 
 | 	struct lpfc_hba *phba = vport->phba; | 
 |  | 
 | 	if (atomic_read(&vport->fc_plogi_cnt) || | 
 | 	    atomic_read(&vport->fc_adisc_cnt)) { | 
 | 		list_for_each_entry_safe(ndlp, next_ndlp, &vport->fc_nodes, | 
 | 					 nlp_listp) { | 
 | 			if (ndlp->nlp_state == NLP_STE_PLOGI_ISSUE || | 
 | 			    ndlp->nlp_state == NLP_STE_ADISC_ISSUE) { | 
 | 				lpfc_free_tx(phba, ndlp); | 
 | 			} | 
 | 		} | 
 | 	} | 
 | } | 
 |  | 
 | /* | 
 |  * lpfc_notify_xport_npr - notifies xport of node disappearance | 
 |  * @vport: Pointer to Virtual Port object. | 
 |  * | 
 |  * Transitions all ndlps to NPR state.  When lpfc_nlp_set_state | 
 |  * calls lpfc_nlp_state_cleanup, the ndlp->rport is unregistered | 
 |  * and transport notified that the node is gone. | 
 |  * Return Code: | 
 |  *	none | 
 |  */ | 
 | static void | 
 | lpfc_notify_xport_npr(struct lpfc_vport *vport) | 
 | { | 
 | 	struct lpfc_nodelist *ndlp, *next_ndlp; | 
 |  | 
 | 	list_for_each_entry_safe(ndlp, next_ndlp, &vport->fc_nodes, | 
 | 				 nlp_listp) { | 
 | 		lpfc_nlp_set_state(vport, ndlp, NLP_STE_NPR_NODE); | 
 | 	} | 
 | } | 
 | void | 
 | lpfc_cleanup_discovery_resources(struct lpfc_vport *vport) | 
 | { | 
 | 	lpfc_els_flush_rscn(vport); | 
 | 	lpfc_els_flush_cmd(vport); | 
 | 	lpfc_disc_flush_list(vport); | 
 | 	if (pci_channel_offline(vport->phba->pcidev)) | 
 | 		lpfc_notify_xport_npr(vport); | 
 | } | 
 |  | 
 | /*****************************************************************************/ | 
 | /* | 
 |  * NAME:     lpfc_disc_timeout | 
 |  * | 
 |  * FUNCTION: Fibre Channel driver discovery timeout routine. | 
 |  * | 
 |  * EXECUTION ENVIRONMENT: interrupt only | 
 |  * | 
 |  * CALLED FROM: | 
 |  *      Timer function | 
 |  * | 
 |  * RETURNS: | 
 |  *      none | 
 |  */ | 
 | /*****************************************************************************/ | 
 | void | 
 | lpfc_disc_timeout(struct timer_list *t) | 
 | { | 
 | 	struct lpfc_vport *vport = from_timer(vport, t, fc_disctmo); | 
 | 	struct lpfc_hba   *phba = vport->phba; | 
 | 	uint32_t tmo_posted; | 
 | 	unsigned long flags = 0; | 
 |  | 
 | 	if (unlikely(!phba)) | 
 | 		return; | 
 |  | 
 | 	spin_lock_irqsave(&vport->work_port_lock, flags); | 
 | 	tmo_posted = vport->work_port_events & WORKER_DISC_TMO; | 
 | 	if (!tmo_posted) | 
 | 		vport->work_port_events |= WORKER_DISC_TMO; | 
 | 	spin_unlock_irqrestore(&vport->work_port_lock, flags); | 
 |  | 
 | 	if (!tmo_posted) | 
 | 		lpfc_worker_wake_up(phba); | 
 | 	return; | 
 | } | 
 |  | 
 | static void | 
 | lpfc_disc_timeout_handler(struct lpfc_vport *vport) | 
 | { | 
 | 	struct lpfc_hba  *phba = vport->phba; | 
 | 	struct lpfc_sli  *psli = &phba->sli; | 
 | 	struct lpfc_nodelist *ndlp, *next_ndlp; | 
 | 	LPFC_MBOXQ_t *initlinkmbox; | 
 | 	int rc, clrlaerr = 0; | 
 |  | 
 | 	if (!test_and_clear_bit(FC_DISC_TMO, &vport->fc_flag)) | 
 | 		return; | 
 |  | 
 | 	lpfc_debugfs_disc_trc(vport, LPFC_DISC_TRC_ELS_CMD, | 
 | 		"disc timeout:    state:x%x rtry:x%x flg:x%x", | 
 | 		vport->port_state, vport->fc_ns_retry, vport->fc_flag); | 
 |  | 
 | 	switch (vport->port_state) { | 
 |  | 
 | 	case LPFC_LOCAL_CFG_LINK: | 
 | 		/* | 
 | 		 * port_state is identically  LPFC_LOCAL_CFG_LINK while | 
 | 		 * waiting for FAN timeout | 
 | 		 */ | 
 | 		lpfc_printf_vlog(vport, KERN_WARNING, LOG_DISCOVERY, | 
 | 				 "0221 FAN timeout\n"); | 
 |  | 
 | 		/* Start discovery by sending FLOGI, clean up old rpis */ | 
 | 		list_for_each_entry_safe(ndlp, next_ndlp, &vport->fc_nodes, | 
 | 					 nlp_listp) { | 
 | 			if (ndlp->nlp_state != NLP_STE_NPR_NODE) | 
 | 				continue; | 
 | 			if (ndlp->nlp_type & NLP_FABRIC) { | 
 | 				/* Clean up the ndlp on Fabric connections */ | 
 | 				lpfc_drop_node(vport, ndlp); | 
 |  | 
 | 			} else if (!(ndlp->nlp_flag & NLP_NPR_ADISC)) { | 
 | 				/* Fail outstanding IO now since device | 
 | 				 * is marked for PLOGI. | 
 | 				 */ | 
 | 				lpfc_unreg_rpi(vport, ndlp); | 
 | 			} | 
 | 		} | 
 | 		if (vport->port_state != LPFC_FLOGI) { | 
 | 			if (phba->sli_rev <= LPFC_SLI_REV3) | 
 | 				lpfc_initial_flogi(vport); | 
 | 			else | 
 | 				lpfc_issue_init_vfi(vport); | 
 | 			return; | 
 | 		} | 
 | 		break; | 
 |  | 
 | 	case LPFC_FDISC: | 
 | 	case LPFC_FLOGI: | 
 | 	/* port_state is identically LPFC_FLOGI while waiting for FLOGI cmpl */ | 
 | 		/* Initial FLOGI timeout */ | 
 | 		lpfc_printf_vlog(vport, KERN_ERR, | 
 | 				 LOG_TRACE_EVENT, | 
 | 				 "0222 Initial %s timeout\n", | 
 | 				 vport->vpi ? "FDISC" : "FLOGI"); | 
 |  | 
 | 		/* Assume no Fabric and go on with discovery. | 
 | 		 * Check for outstanding ELS FLOGI to abort. | 
 | 		 */ | 
 |  | 
 | 		/* FLOGI failed, so just use loop map to make discovery list */ | 
 | 		lpfc_disc_list_loopmap(vport); | 
 |  | 
 | 		/* Start discovery */ | 
 | 		lpfc_disc_start(vport); | 
 | 		break; | 
 |  | 
 | 	case LPFC_FABRIC_CFG_LINK: | 
 | 	/* hba_state is identically LPFC_FABRIC_CFG_LINK while waiting for | 
 | 	   NameServer login */ | 
 | 		lpfc_printf_vlog(vport, KERN_ERR, | 
 | 				 LOG_TRACE_EVENT, | 
 | 				 "0223 Timeout while waiting for " | 
 | 				 "NameServer login\n"); | 
 | 		/* Next look for NameServer ndlp */ | 
 | 		ndlp = lpfc_findnode_did(vport, NameServer_DID); | 
 | 		if (ndlp) | 
 | 			lpfc_els_abort(phba, ndlp); | 
 |  | 
 | 		/* ReStart discovery */ | 
 | 		goto restart_disc; | 
 |  | 
 | 	case LPFC_NS_QRY: | 
 | 	/* Check for wait for NameServer Rsp timeout */ | 
 | 		lpfc_printf_vlog(vport, KERN_ERR, | 
 | 				 LOG_TRACE_EVENT, | 
 | 				 "0224 NameServer Query timeout " | 
 | 				 "Data: x%x x%x\n", | 
 | 				 vport->fc_ns_retry, LPFC_MAX_NS_RETRY); | 
 |  | 
 | 		if (vport->fc_ns_retry < LPFC_MAX_NS_RETRY) { | 
 | 			/* Try it one more time */ | 
 | 			vport->fc_ns_retry++; | 
 | 			vport->gidft_inp = 0; | 
 | 			rc = lpfc_issue_gidft(vport); | 
 | 			if (rc == 0) | 
 | 				break; | 
 | 		} | 
 | 		vport->fc_ns_retry = 0; | 
 |  | 
 | restart_disc: | 
 | 		/* | 
 | 		 * Discovery is over. | 
 | 		 * set port_state to PORT_READY if SLI2. | 
 | 		 * cmpl_reg_vpi will set port_state to READY for SLI3. | 
 | 		 */ | 
 | 		if (phba->sli_rev < LPFC_SLI_REV4) { | 
 | 			if (phba->sli3_options & LPFC_SLI3_NPIV_ENABLED) | 
 | 				lpfc_issue_reg_vpi(phba, vport); | 
 | 			else  { | 
 | 				lpfc_issue_clear_la(phba, vport); | 
 | 				vport->port_state = LPFC_VPORT_READY; | 
 | 			} | 
 | 		} | 
 |  | 
 | 		/* Setup and issue mailbox INITIALIZE LINK command */ | 
 | 		initlinkmbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); | 
 | 		if (!initlinkmbox) { | 
 | 			lpfc_printf_vlog(vport, KERN_ERR, | 
 | 					 LOG_TRACE_EVENT, | 
 | 					 "0206 Device Discovery " | 
 | 					 "completion error\n"); | 
 | 			phba->link_state = LPFC_HBA_ERROR; | 
 | 			break; | 
 | 		} | 
 |  | 
 | 		lpfc_linkdown(phba); | 
 | 		lpfc_init_link(phba, initlinkmbox, phba->cfg_topology, | 
 | 			       phba->cfg_link_speed); | 
 | 		initlinkmbox->u.mb.un.varInitLnk.lipsr_AL_PA = 0; | 
 | 		initlinkmbox->vport = vport; | 
 | 		initlinkmbox->mbox_cmpl = lpfc_sli_def_mbox_cmpl; | 
 | 		rc = lpfc_sli_issue_mbox(phba, initlinkmbox, MBX_NOWAIT); | 
 | 		lpfc_set_loopback_flag(phba); | 
 | 		if (rc == MBX_NOT_FINISHED) | 
 | 			mempool_free(initlinkmbox, phba->mbox_mem_pool); | 
 |  | 
 | 		break; | 
 |  | 
 | 	case LPFC_DISC_AUTH: | 
 | 	/* Node Authentication timeout */ | 
 | 		lpfc_printf_vlog(vport, KERN_ERR, | 
 | 				 LOG_TRACE_EVENT, | 
 | 				 "0227 Node Authentication timeout\n"); | 
 | 		lpfc_disc_flush_list(vport); | 
 |  | 
 | 		/* | 
 | 		 * set port_state to PORT_READY if SLI2. | 
 | 		 * cmpl_reg_vpi will set port_state to READY for SLI3. | 
 | 		 */ | 
 | 		if (phba->sli_rev < LPFC_SLI_REV4) { | 
 | 			if (phba->sli3_options & LPFC_SLI3_NPIV_ENABLED) | 
 | 				lpfc_issue_reg_vpi(phba, vport); | 
 | 			else  {	/* NPIV Not enabled */ | 
 | 				lpfc_issue_clear_la(phba, vport); | 
 | 				vport->port_state = LPFC_VPORT_READY; | 
 | 			} | 
 | 		} | 
 | 		break; | 
 |  | 
 | 	case LPFC_VPORT_READY: | 
 | 		if (test_bit(FC_RSCN_MODE, &vport->fc_flag)) { | 
 | 			lpfc_printf_vlog(vport, KERN_ERR, | 
 | 					 LOG_TRACE_EVENT, | 
 | 					 "0231 RSCN timeout Data: x%x " | 
 | 					 "x%x x%x x%x\n", | 
 | 					 vport->fc_ns_retry, LPFC_MAX_NS_RETRY, | 
 | 					 vport->port_state, vport->gidft_inp); | 
 |  | 
 | 			/* Cleanup any outstanding ELS commands */ | 
 | 			lpfc_els_flush_cmd(vport); | 
 |  | 
 | 			lpfc_els_flush_rscn(vport); | 
 | 			lpfc_disc_flush_list(vport); | 
 | 		} | 
 | 		break; | 
 |  | 
 | 	default: | 
 | 		lpfc_printf_vlog(vport, KERN_ERR, | 
 | 				 LOG_TRACE_EVENT, | 
 | 				 "0273 Unexpected discovery timeout, " | 
 | 				 "vport State x%x\n", vport->port_state); | 
 | 		break; | 
 | 	} | 
 |  | 
 | 	switch (phba->link_state) { | 
 | 	case LPFC_CLEAR_LA: | 
 | 				/* CLEAR LA timeout */ | 
 | 		lpfc_printf_vlog(vport, KERN_ERR, | 
 | 				 LOG_TRACE_EVENT, | 
 | 				 "0228 CLEAR LA timeout\n"); | 
 | 		clrlaerr = 1; | 
 | 		break; | 
 |  | 
 | 	case LPFC_LINK_UP: | 
 | 		lpfc_issue_clear_la(phba, vport); | 
 | 		fallthrough; | 
 | 	case LPFC_LINK_UNKNOWN: | 
 | 	case LPFC_WARM_START: | 
 | 	case LPFC_INIT_START: | 
 | 	case LPFC_INIT_MBX_CMDS: | 
 | 	case LPFC_LINK_DOWN: | 
 | 	case LPFC_HBA_ERROR: | 
 | 		lpfc_printf_vlog(vport, KERN_ERR, | 
 | 				 LOG_TRACE_EVENT, | 
 | 				 "0230 Unexpected timeout, hba link " | 
 | 				 "state x%x\n", phba->link_state); | 
 | 		clrlaerr = 1; | 
 | 		break; | 
 |  | 
 | 	case LPFC_HBA_READY: | 
 | 		break; | 
 | 	} | 
 |  | 
 | 	if (clrlaerr) { | 
 | 		lpfc_disc_flush_list(vport); | 
 | 		if (phba->sli_rev != LPFC_SLI_REV4) { | 
 | 			psli->sli3_ring[(LPFC_EXTRA_RING)].flag &= | 
 | 				~LPFC_STOP_IOCB_EVENT; | 
 | 			psli->sli3_ring[LPFC_FCP_RING].flag &= | 
 | 				~LPFC_STOP_IOCB_EVENT; | 
 | 		} | 
 | 		vport->port_state = LPFC_VPORT_READY; | 
 | 	} | 
 | 	return; | 
 | } | 
 |  | 
 | /* | 
 |  * This routine handles processing a NameServer REG_LOGIN mailbox | 
 |  * command upon completion. It is setup in the LPFC_MBOXQ | 
 |  * as the completion routine when the command is | 
 |  * handed off to the SLI layer. | 
 |  */ | 
 | void | 
 | lpfc_mbx_cmpl_fdmi_reg_login(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) | 
 | { | 
 | 	MAILBOX_t *mb = &pmb->u.mb; | 
 | 	struct lpfc_nodelist *ndlp = pmb->ctx_ndlp; | 
 | 	struct lpfc_vport    *vport = pmb->vport; | 
 |  | 
 | 	pmb->ctx_ndlp = NULL; | 
 |  | 
 | 	if (phba->sli_rev < LPFC_SLI_REV4) | 
 | 		ndlp->nlp_rpi = mb->un.varWords[0]; | 
 | 	ndlp->nlp_flag |= NLP_RPI_REGISTERED; | 
 | 	ndlp->nlp_type |= NLP_FABRIC; | 
 | 	lpfc_nlp_set_state(vport, ndlp, NLP_STE_UNMAPPED_NODE); | 
 | 	lpfc_printf_vlog(vport, KERN_INFO, LOG_NODE | LOG_DISCOVERY, | 
 | 			 "0004 rpi:%x DID:%x flg:%x %d x%px\n", | 
 | 			 ndlp->nlp_rpi, ndlp->nlp_DID, ndlp->nlp_flag, | 
 | 			 kref_read(&ndlp->kref), | 
 | 			 ndlp); | 
 | 	/* | 
 | 	 * Start issuing Fabric-Device Management Interface (FDMI) command to | 
 | 	 * 0xfffffa (FDMI well known port). | 
 | 	 * DHBA -> DPRT -> RHBA -> RPA  (physical port) | 
 | 	 * DPRT -> RPRT (vports) | 
 | 	 */ | 
 | 	if (vport->port_type == LPFC_PHYSICAL_PORT) { | 
 | 		phba->link_flag &= ~LS_CT_VEN_RPA; /* For extra Vendor RPA */ | 
 | 		lpfc_fdmi_cmd(vport, ndlp, SLI_MGMT_DHBA, 0); | 
 | 	} else { | 
 | 		lpfc_fdmi_cmd(vport, ndlp, SLI_MGMT_DPRT, 0); | 
 | 	} | 
 |  | 
 |  | 
 | 	/* decrement the node reference count held for this callback | 
 | 	 * function. | 
 | 	 */ | 
 | 	lpfc_nlp_put(ndlp); | 
 | 	lpfc_mbox_rsrc_cleanup(phba, pmb, MBOX_THD_UNLOCKED); | 
 | 	return; | 
 | } | 
 |  | 
 | static int | 
 | lpfc_filter_by_rpi(struct lpfc_nodelist *ndlp, void *param) | 
 | { | 
 | 	uint16_t *rpi = param; | 
 |  | 
 | 	return ndlp->nlp_rpi == *rpi; | 
 | } | 
 |  | 
 | static int | 
 | lpfc_filter_by_wwpn(struct lpfc_nodelist *ndlp, void *param) | 
 | { | 
 | 	return memcmp(&ndlp->nlp_portname, param, | 
 | 		      sizeof(ndlp->nlp_portname)) == 0; | 
 | } | 
 |  | 
 | static struct lpfc_nodelist * | 
 | __lpfc_find_node(struct lpfc_vport *vport, node_filter filter, void *param) | 
 | { | 
 | 	struct lpfc_nodelist *ndlp; | 
 |  | 
 | 	list_for_each_entry(ndlp, &vport->fc_nodes, nlp_listp) { | 
 | 		if (filter(ndlp, param)) { | 
 | 			lpfc_printf_vlog(vport, KERN_INFO, LOG_NODE_VERBOSE, | 
 | 					 "3185 FIND node filter %ps DID " | 
 | 					 "ndlp x%px did x%x flg x%x st x%x " | 
 | 					 "xri x%x type x%x rpi x%x\n", | 
 | 					 filter, ndlp, ndlp->nlp_DID, | 
 | 					 ndlp->nlp_flag, ndlp->nlp_state, | 
 | 					 ndlp->nlp_xri, ndlp->nlp_type, | 
 | 					 ndlp->nlp_rpi); | 
 | 			return ndlp; | 
 | 		} | 
 | 	} | 
 | 	lpfc_printf_vlog(vport, KERN_INFO, LOG_NODE, | 
 | 			 "3186 FIND node filter %ps NOT FOUND.\n", filter); | 
 | 	return NULL; | 
 | } | 
 |  | 
 | /* | 
 |  * This routine looks up the ndlp lists for the given RPI. If rpi found it | 
 |  * returns the node list element pointer else return NULL. | 
 |  */ | 
 | struct lpfc_nodelist * | 
 | __lpfc_findnode_rpi(struct lpfc_vport *vport, uint16_t rpi) | 
 | { | 
 | 	return __lpfc_find_node(vport, lpfc_filter_by_rpi, &rpi); | 
 | } | 
 |  | 
 | /* | 
 |  * This routine looks up the ndlp lists for the given WWPN. If WWPN found it | 
 |  * returns the node element list pointer else return NULL. | 
 |  */ | 
 | struct lpfc_nodelist * | 
 | lpfc_findnode_wwpn(struct lpfc_vport *vport, struct lpfc_name *wwpn) | 
 | { | 
 | 	struct Scsi_Host *shost = lpfc_shost_from_vport(vport); | 
 | 	struct lpfc_nodelist *ndlp; | 
 |  | 
 | 	spin_lock_irq(shost->host_lock); | 
 | 	ndlp = __lpfc_find_node(vport, lpfc_filter_by_wwpn, wwpn); | 
 | 	spin_unlock_irq(shost->host_lock); | 
 | 	return ndlp; | 
 | } | 
 |  | 
 | /* | 
 |  * This routine looks up the ndlp lists for the given RPI. If the rpi | 
 |  * is found, the routine returns the node element list pointer else | 
 |  * return NULL. | 
 |  */ | 
 | struct lpfc_nodelist * | 
 | lpfc_findnode_rpi(struct lpfc_vport *vport, uint16_t rpi) | 
 | { | 
 | 	struct Scsi_Host *shost = lpfc_shost_from_vport(vport); | 
 | 	struct lpfc_nodelist *ndlp; | 
 | 	unsigned long flags; | 
 |  | 
 | 	spin_lock_irqsave(shost->host_lock, flags); | 
 | 	ndlp = __lpfc_findnode_rpi(vport, rpi); | 
 | 	spin_unlock_irqrestore(shost->host_lock, flags); | 
 | 	return ndlp; | 
 | } | 
 |  | 
 | /** | 
 |  * lpfc_find_vport_by_vpid - Find a vport on a HBA through vport identifier | 
 |  * @phba: pointer to lpfc hba data structure. | 
 |  * @vpi: the physical host virtual N_Port identifier. | 
 |  * | 
 |  * This routine finds a vport on a HBA (referred by @phba) through a | 
 |  * @vpi. The function walks the HBA's vport list and returns the address | 
 |  * of the vport with the matching @vpi. | 
 |  * | 
 |  * Return code | 
 |  *    NULL - No vport with the matching @vpi found | 
 |  *    Otherwise - Address to the vport with the matching @vpi. | 
 |  **/ | 
 | struct lpfc_vport * | 
 | lpfc_find_vport_by_vpid(struct lpfc_hba *phba, uint16_t vpi) | 
 | { | 
 | 	struct lpfc_vport *vport; | 
 | 	unsigned long flags; | 
 | 	int i = 0; | 
 |  | 
 | 	/* The physical ports are always vpi 0 - translate is unnecessary. */ | 
 | 	if (vpi > 0) { | 
 | 		/* | 
 | 		 * Translate the physical vpi to the logical vpi.  The | 
 | 		 * vport stores the logical vpi. | 
 | 		 */ | 
 | 		for (i = 0; i <= phba->max_vpi; i++) { | 
 | 			if (vpi == phba->vpi_ids[i]) | 
 | 				break; | 
 | 		} | 
 |  | 
 | 		if (i > phba->max_vpi) { | 
 | 			lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, | 
 | 					"2936 Could not find Vport mapped " | 
 | 					"to vpi %d\n", vpi); | 
 | 			return NULL; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	spin_lock_irqsave(&phba->port_list_lock, flags); | 
 | 	list_for_each_entry(vport, &phba->port_list, listentry) { | 
 | 		if (vport->vpi == i) { | 
 | 			spin_unlock_irqrestore(&phba->port_list_lock, flags); | 
 | 			return vport; | 
 | 		} | 
 | 	} | 
 | 	spin_unlock_irqrestore(&phba->port_list_lock, flags); | 
 | 	return NULL; | 
 | } | 
 |  | 
 | struct lpfc_nodelist * | 
 | lpfc_nlp_init(struct lpfc_vport *vport, uint32_t did) | 
 | { | 
 | 	struct lpfc_nodelist *ndlp; | 
 | 	int rpi = LPFC_RPI_ALLOC_ERROR; | 
 |  | 
 | 	if (vport->phba->sli_rev == LPFC_SLI_REV4) { | 
 | 		rpi = lpfc_sli4_alloc_rpi(vport->phba); | 
 | 		if (rpi == LPFC_RPI_ALLOC_ERROR) | 
 | 			return NULL; | 
 | 	} | 
 |  | 
 | 	ndlp = mempool_alloc(vport->phba->nlp_mem_pool, GFP_KERNEL); | 
 | 	if (!ndlp) { | 
 | 		if (vport->phba->sli_rev == LPFC_SLI_REV4) | 
 | 			lpfc_sli4_free_rpi(vport->phba, rpi); | 
 | 		return NULL; | 
 | 	} | 
 |  | 
 | 	memset(ndlp, 0, sizeof (struct lpfc_nodelist)); | 
 |  | 
 | 	spin_lock_init(&ndlp->lock); | 
 |  | 
 | 	lpfc_initialize_node(vport, ndlp, did); | 
 | 	INIT_LIST_HEAD(&ndlp->nlp_listp); | 
 | 	if (vport->phba->sli_rev == LPFC_SLI_REV4) { | 
 | 		ndlp->nlp_rpi = rpi; | 
 | 		lpfc_printf_vlog(vport, KERN_INFO, LOG_NODE | LOG_DISCOVERY, | 
 | 				 "0007 Init New ndlp x%px, rpi:x%x DID:%x " | 
 | 				 "flg:x%x refcnt:%d\n", | 
 | 				 ndlp, ndlp->nlp_rpi, ndlp->nlp_DID, | 
 | 				 ndlp->nlp_flag, kref_read(&ndlp->kref)); | 
 |  | 
 | 		ndlp->active_rrqs_xri_bitmap = | 
 | 				mempool_alloc(vport->phba->active_rrq_pool, | 
 | 					      GFP_KERNEL); | 
 | 		if (ndlp->active_rrqs_xri_bitmap) | 
 | 			memset(ndlp->active_rrqs_xri_bitmap, 0, | 
 | 			       ndlp->phba->cfg_rrq_xri_bitmap_sz); | 
 | 	} | 
 |  | 
 |  | 
 |  | 
 | 	lpfc_debugfs_disc_trc(vport, LPFC_DISC_TRC_NODE, | 
 | 		"node init:       did:x%x", | 
 | 		ndlp->nlp_DID, 0, 0); | 
 |  | 
 | 	return ndlp; | 
 | } | 
 |  | 
 | /* This routine releases all resources associated with a specifc NPort's ndlp | 
 |  * and mempool_free's the nodelist. | 
 |  */ | 
 | static void | 
 | lpfc_nlp_release(struct kref *kref) | 
 | { | 
 | 	struct lpfc_nodelist *ndlp = container_of(kref, struct lpfc_nodelist, | 
 | 						  kref); | 
 | 	struct lpfc_vport *vport = ndlp->vport; | 
 |  | 
 | 	lpfc_debugfs_disc_trc(ndlp->vport, LPFC_DISC_TRC_NODE, | 
 | 		"node release:    did:x%x flg:x%x type:x%x", | 
 | 		ndlp->nlp_DID, ndlp->nlp_flag, ndlp->nlp_type); | 
 |  | 
 | 	lpfc_printf_vlog(vport, KERN_INFO, LOG_NODE, | 
 | 			 "0279 %s: ndlp: x%px did %x refcnt:%d rpi:%x\n", | 
 | 			 __func__, ndlp, ndlp->nlp_DID, | 
 | 			 kref_read(&ndlp->kref), ndlp->nlp_rpi); | 
 |  | 
 | 	/* remove ndlp from action. */ | 
 | 	lpfc_cancel_retry_delay_tmo(vport, ndlp); | 
 | 	lpfc_cleanup_node(vport, ndlp); | 
 |  | 
 | 	/* Not all ELS transactions have registered the RPI with the port. | 
 | 	 * In these cases the rpi usage is temporary and the node is | 
 | 	 * released when the WQE is completed.  Catch this case to free the | 
 | 	 * RPI to the pool.  Because this node is in the release path, a lock | 
 | 	 * is unnecessary.  All references are gone and the node has been | 
 | 	 * dequeued. | 
 | 	 */ | 
 | 	if (ndlp->nlp_flag & NLP_RELEASE_RPI) { | 
 | 		if (ndlp->nlp_rpi != LPFC_RPI_ALLOC_ERROR && | 
 | 		    !(ndlp->nlp_flag & (NLP_RPI_REGISTERED | NLP_UNREG_INP))) { | 
 | 			lpfc_sli4_free_rpi(vport->phba, ndlp->nlp_rpi); | 
 | 			ndlp->nlp_rpi = LPFC_RPI_ALLOC_ERROR; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	/* The node is not freed back to memory, it is released to a pool so | 
 | 	 * the node fields need to be cleaned up. | 
 | 	 */ | 
 | 	ndlp->vport = NULL; | 
 | 	ndlp->nlp_state = NLP_STE_FREED_NODE; | 
 | 	ndlp->nlp_flag = 0; | 
 | 	ndlp->fc4_xpt_flags = 0; | 
 |  | 
 | 	/* free ndlp memory for final ndlp release */ | 
 | 	if (ndlp->phba->sli_rev == LPFC_SLI_REV4) | 
 | 		mempool_free(ndlp->active_rrqs_xri_bitmap, | 
 | 				ndlp->phba->active_rrq_pool); | 
 | 	mempool_free(ndlp, ndlp->phba->nlp_mem_pool); | 
 | } | 
 |  | 
 | /* This routine bumps the reference count for a ndlp structure to ensure | 
 |  * that one discovery thread won't free a ndlp while another discovery thread | 
 |  * is using it. | 
 |  */ | 
 | struct lpfc_nodelist * | 
 | lpfc_nlp_get(struct lpfc_nodelist *ndlp) | 
 | { | 
 | 	unsigned long flags; | 
 |  | 
 | 	if (ndlp) { | 
 | 		lpfc_debugfs_disc_trc(ndlp->vport, LPFC_DISC_TRC_NODE, | 
 | 			"node get:        did:x%x flg:x%x refcnt:x%x", | 
 | 			ndlp->nlp_DID, ndlp->nlp_flag, | 
 | 			kref_read(&ndlp->kref)); | 
 |  | 
 | 		/* The check of ndlp usage to prevent incrementing the | 
 | 		 * ndlp reference count that is in the process of being | 
 | 		 * released. | 
 | 		 */ | 
 | 		spin_lock_irqsave(&ndlp->lock, flags); | 
 | 		if (!kref_get_unless_zero(&ndlp->kref)) { | 
 | 			spin_unlock_irqrestore(&ndlp->lock, flags); | 
 | 			lpfc_printf_vlog(ndlp->vport, KERN_WARNING, LOG_NODE, | 
 | 				"0276 %s: ndlp:x%px refcnt:%d\n", | 
 | 				__func__, (void *)ndlp, kref_read(&ndlp->kref)); | 
 | 			return NULL; | 
 | 		} | 
 | 		spin_unlock_irqrestore(&ndlp->lock, flags); | 
 | 	} else { | 
 | 		WARN_ONCE(!ndlp, "**** %s, get ref on NULL ndlp!", __func__); | 
 | 	} | 
 |  | 
 | 	return ndlp; | 
 | } | 
 |  | 
 | /* This routine decrements the reference count for a ndlp structure. If the | 
 |  * count goes to 0, this indicates the associated nodelist should be freed. | 
 |  */ | 
 | int | 
 | lpfc_nlp_put(struct lpfc_nodelist *ndlp) | 
 | { | 
 | 	if (ndlp) { | 
 | 		lpfc_debugfs_disc_trc(ndlp->vport, LPFC_DISC_TRC_NODE, | 
 | 				"node put:        did:x%x flg:x%x refcnt:x%x", | 
 | 				ndlp->nlp_DID, ndlp->nlp_flag, | 
 | 				kref_read(&ndlp->kref)); | 
 | 	} else { | 
 | 		WARN_ONCE(!ndlp, "**** %s, put ref on NULL ndlp!", __func__); | 
 | 	} | 
 |  | 
 | 	return ndlp ? kref_put(&ndlp->kref, lpfc_nlp_release) : 0; | 
 | } | 
 |  | 
 | /** | 
 |  * lpfc_fcf_inuse - Check if FCF can be unregistered. | 
 |  * @phba: Pointer to hba context object. | 
 |  * | 
 |  * This function iterate through all FC nodes associated | 
 |  * will all vports to check if there is any node with | 
 |  * fc_rports associated with it. If there is an fc_rport | 
 |  * associated with the node, then the node is either in | 
 |  * discovered state or its devloss_timer is pending. | 
 |  */ | 
 | static int | 
 | lpfc_fcf_inuse(struct lpfc_hba *phba) | 
 | { | 
 | 	struct lpfc_vport **vports; | 
 | 	int i, ret = 0; | 
 | 	struct lpfc_nodelist *ndlp; | 
 | 	unsigned long iflags; | 
 |  | 
 | 	vports = lpfc_create_vport_work_array(phba); | 
 |  | 
 | 	/* If driver cannot allocate memory, indicate fcf is in use */ | 
 | 	if (!vports) | 
 | 		return 1; | 
 |  | 
 | 	for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) { | 
 | 		/* | 
 | 		 * IF the CVL_RCVD bit is not set then we have sent the | 
 | 		 * flogi. | 
 | 		 * If dev_loss fires while we are waiting we do not want to | 
 | 		 * unreg the fcf. | 
 | 		 */ | 
 | 		if (!test_bit(FC_VPORT_CVL_RCVD, &vports[i]->fc_flag)) { | 
 | 			ret =  1; | 
 | 			goto out; | 
 | 		} | 
 | 		spin_lock_irqsave(&vports[i]->fc_nodes_list_lock, iflags); | 
 | 		list_for_each_entry(ndlp, &vports[i]->fc_nodes, nlp_listp) { | 
 | 			if (ndlp->rport && | 
 | 			  (ndlp->rport->roles & FC_RPORT_ROLE_FCP_TARGET)) { | 
 | 				ret = 1; | 
 | 				spin_unlock_irqrestore(&vports[i]->fc_nodes_list_lock, | 
 | 						       iflags); | 
 | 				goto out; | 
 | 			} else if (ndlp->nlp_flag & NLP_RPI_REGISTERED) { | 
 | 				ret = 1; | 
 | 				lpfc_printf_log(phba, KERN_INFO, | 
 | 						LOG_NODE | LOG_DISCOVERY, | 
 | 						"2624 RPI %x DID %x flag %x " | 
 | 						"still logged in\n", | 
 | 						ndlp->nlp_rpi, ndlp->nlp_DID, | 
 | 						ndlp->nlp_flag); | 
 | 			} | 
 | 		} | 
 | 		spin_unlock_irqrestore(&vports[i]->fc_nodes_list_lock, iflags); | 
 | 	} | 
 | out: | 
 | 	lpfc_destroy_vport_work_array(phba, vports); | 
 | 	return ret; | 
 | } | 
 |  | 
 | /** | 
 |  * lpfc_unregister_vfi_cmpl - Completion handler for unreg vfi. | 
 |  * @phba: Pointer to hba context object. | 
 |  * @mboxq: Pointer to mailbox object. | 
 |  * | 
 |  * This function frees memory associated with the mailbox command. | 
 |  */ | 
 | void | 
 | lpfc_unregister_vfi_cmpl(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq) | 
 | { | 
 | 	struct lpfc_vport *vport = mboxq->vport; | 
 |  | 
 | 	if (mboxq->u.mb.mbxStatus) { | 
 | 		lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, | 
 | 				"2555 UNREG_VFI mbxStatus error x%x " | 
 | 				"HBA state x%x\n", | 
 | 				mboxq->u.mb.mbxStatus, vport->port_state); | 
 | 	} | 
 | 	clear_bit(FC_VFI_REGISTERED, &phba->pport->fc_flag); | 
 | 	mempool_free(mboxq, phba->mbox_mem_pool); | 
 | 	return; | 
 | } | 
 |  | 
 | /** | 
 |  * lpfc_unregister_fcfi_cmpl - Completion handler for unreg fcfi. | 
 |  * @phba: Pointer to hba context object. | 
 |  * @mboxq: Pointer to mailbox object. | 
 |  * | 
 |  * This function frees memory associated with the mailbox command. | 
 |  */ | 
 | static void | 
 | lpfc_unregister_fcfi_cmpl(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq) | 
 | { | 
 | 	struct lpfc_vport *vport = mboxq->vport; | 
 |  | 
 | 	if (mboxq->u.mb.mbxStatus) { | 
 | 		lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, | 
 | 				"2550 UNREG_FCFI mbxStatus error x%x " | 
 | 				"HBA state x%x\n", | 
 | 				mboxq->u.mb.mbxStatus, vport->port_state); | 
 | 	} | 
 | 	mempool_free(mboxq, phba->mbox_mem_pool); | 
 | 	return; | 
 | } | 
 |  | 
 | /** | 
 |  * lpfc_unregister_fcf_prep - Unregister fcf record preparation | 
 |  * @phba: Pointer to hba context object. | 
 |  * | 
 |  * This function prepare the HBA for unregistering the currently registered | 
 |  * FCF from the HBA. It performs unregistering, in order, RPIs, VPIs, and | 
 |  * VFIs. | 
 |  */ | 
 | int | 
 | lpfc_unregister_fcf_prep(struct lpfc_hba *phba) | 
 | { | 
 | 	struct lpfc_vport **vports; | 
 | 	struct lpfc_nodelist *ndlp; | 
 | 	struct Scsi_Host *shost; | 
 | 	int i = 0, rc; | 
 |  | 
 | 	/* Unregister RPIs */ | 
 | 	if (lpfc_fcf_inuse(phba)) | 
 | 		lpfc_unreg_hba_rpis(phba); | 
 |  | 
 | 	/* At this point, all discovery is aborted */ | 
 | 	phba->pport->port_state = LPFC_VPORT_UNKNOWN; | 
 |  | 
 | 	/* Unregister VPIs */ | 
 | 	vports = lpfc_create_vport_work_array(phba); | 
 | 	if (vports && (phba->sli3_options & LPFC_SLI3_NPIV_ENABLED)) | 
 | 		for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) { | 
 | 			/* Stop FLOGI/FDISC retries */ | 
 | 			ndlp = lpfc_findnode_did(vports[i], Fabric_DID); | 
 | 			if (ndlp) | 
 | 				lpfc_cancel_retry_delay_tmo(vports[i], ndlp); | 
 | 			lpfc_cleanup_pending_mbox(vports[i]); | 
 | 			if (phba->sli_rev == LPFC_SLI_REV4) | 
 | 				lpfc_sli4_unreg_all_rpis(vports[i]); | 
 | 			lpfc_mbx_unreg_vpi(vports[i]); | 
 | 			shost = lpfc_shost_from_vport(vports[i]); | 
 | 			spin_lock_irq(shost->host_lock); | 
 | 			vports[i]->vpi_state &= ~LPFC_VPI_REGISTERED; | 
 | 			spin_unlock_irq(shost->host_lock); | 
 | 			set_bit(FC_VPORT_NEEDS_INIT_VPI, &vports[i]->fc_flag); | 
 | 		} | 
 | 	lpfc_destroy_vport_work_array(phba, vports); | 
 | 	if (i == 0 && (!(phba->sli3_options & LPFC_SLI3_NPIV_ENABLED))) { | 
 | 		ndlp = lpfc_findnode_did(phba->pport, Fabric_DID); | 
 | 		if (ndlp) | 
 | 			lpfc_cancel_retry_delay_tmo(phba->pport, ndlp); | 
 | 		lpfc_cleanup_pending_mbox(phba->pport); | 
 | 		if (phba->sli_rev == LPFC_SLI_REV4) | 
 | 			lpfc_sli4_unreg_all_rpis(phba->pport); | 
 | 		lpfc_mbx_unreg_vpi(phba->pport); | 
 | 		shost = lpfc_shost_from_vport(phba->pport); | 
 | 		spin_lock_irq(shost->host_lock); | 
 | 		phba->pport->vpi_state &= ~LPFC_VPI_REGISTERED; | 
 | 		spin_unlock_irq(shost->host_lock); | 
 | 		set_bit(FC_VPORT_NEEDS_INIT_VPI, &phba->pport->fc_flag); | 
 | 	} | 
 |  | 
 | 	/* Cleanup any outstanding ELS commands */ | 
 | 	lpfc_els_flush_all_cmd(phba); | 
 |  | 
 | 	/* Unregister the physical port VFI */ | 
 | 	rc = lpfc_issue_unreg_vfi(phba->pport); | 
 | 	return rc; | 
 | } | 
 |  | 
 | /** | 
 |  * lpfc_sli4_unregister_fcf - Unregister currently registered FCF record | 
 |  * @phba: Pointer to hba context object. | 
 |  * | 
 |  * This function issues synchronous unregister FCF mailbox command to HBA to | 
 |  * unregister the currently registered FCF record. The driver does not reset | 
 |  * the driver FCF usage state flags. | 
 |  * | 
 |  * Return 0 if successfully issued, none-zero otherwise. | 
 |  */ | 
 | int | 
 | lpfc_sli4_unregister_fcf(struct lpfc_hba *phba) | 
 | { | 
 | 	LPFC_MBOXQ_t *mbox; | 
 | 	int rc; | 
 |  | 
 | 	mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); | 
 | 	if (!mbox) { | 
 | 		lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, | 
 | 				"2551 UNREG_FCFI mbox allocation failed" | 
 | 				"HBA state x%x\n", phba->pport->port_state); | 
 | 		return -ENOMEM; | 
 | 	} | 
 | 	lpfc_unreg_fcfi(mbox, phba->fcf.fcfi); | 
 | 	mbox->vport = phba->pport; | 
 | 	mbox->mbox_cmpl = lpfc_unregister_fcfi_cmpl; | 
 | 	rc = lpfc_sli_issue_mbox(phba, mbox, MBX_NOWAIT); | 
 |  | 
 | 	if (rc == MBX_NOT_FINISHED) { | 
 | 		lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, | 
 | 				"2552 Unregister FCFI command failed rc x%x " | 
 | 				"HBA state x%x\n", | 
 | 				rc, phba->pport->port_state); | 
 | 		return -EINVAL; | 
 | 	} | 
 | 	return 0; | 
 | } | 
 |  | 
 | /** | 
 |  * lpfc_unregister_fcf_rescan - Unregister currently registered fcf and rescan | 
 |  * @phba: Pointer to hba context object. | 
 |  * | 
 |  * This function unregisters the currently reigstered FCF. This function | 
 |  * also tries to find another FCF for discovery by rescan the HBA FCF table. | 
 |  */ | 
 | void | 
 | lpfc_unregister_fcf_rescan(struct lpfc_hba *phba) | 
 | { | 
 | 	int rc; | 
 |  | 
 | 	/* Preparation for unregistering fcf */ | 
 | 	rc = lpfc_unregister_fcf_prep(phba); | 
 | 	if (rc) { | 
 | 		lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, | 
 | 				"2748 Failed to prepare for unregistering " | 
 | 				"HBA's FCF record: rc=%d\n", rc); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	/* Now, unregister FCF record and reset HBA FCF state */ | 
 | 	rc = lpfc_sli4_unregister_fcf(phba); | 
 | 	if (rc) | 
 | 		return; | 
 | 	/* Reset HBA FCF states after successful unregister FCF */ | 
 | 	spin_lock_irq(&phba->hbalock); | 
 | 	phba->fcf.fcf_flag = 0; | 
 | 	spin_unlock_irq(&phba->hbalock); | 
 | 	phba->fcf.current_rec.flag = 0; | 
 |  | 
 | 	/* | 
 | 	 * If driver is not unloading, check if there is any other | 
 | 	 * FCF record that can be used for discovery. | 
 | 	 */ | 
 | 	if (test_bit(FC_UNLOADING, &phba->pport->load_flag) || | 
 | 	    phba->link_state < LPFC_LINK_UP) | 
 | 		return; | 
 |  | 
 | 	/* This is considered as the initial FCF discovery scan */ | 
 | 	spin_lock_irq(&phba->hbalock); | 
 | 	phba->fcf.fcf_flag |= FCF_INIT_DISC; | 
 | 	spin_unlock_irq(&phba->hbalock); | 
 |  | 
 | 	/* Reset FCF roundrobin bmask for new discovery */ | 
 | 	lpfc_sli4_clear_fcf_rr_bmask(phba); | 
 |  | 
 | 	rc = lpfc_sli4_fcf_scan_read_fcf_rec(phba, LPFC_FCOE_FCF_GET_FIRST); | 
 |  | 
 | 	if (rc) { | 
 | 		spin_lock_irq(&phba->hbalock); | 
 | 		phba->fcf.fcf_flag &= ~FCF_INIT_DISC; | 
 | 		spin_unlock_irq(&phba->hbalock); | 
 | 		lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, | 
 | 				"2553 lpfc_unregister_unused_fcf failed " | 
 | 				"to read FCF record HBA state x%x\n", | 
 | 				phba->pport->port_state); | 
 | 	} | 
 | } | 
 |  | 
 | /** | 
 |  * lpfc_unregister_fcf - Unregister the currently registered fcf record | 
 |  * @phba: Pointer to hba context object. | 
 |  * | 
 |  * This function just unregisters the currently reigstered FCF. It does not | 
 |  * try to find another FCF for discovery. | 
 |  */ | 
 | void | 
 | lpfc_unregister_fcf(struct lpfc_hba *phba) | 
 | { | 
 | 	int rc; | 
 |  | 
 | 	/* Preparation for unregistering fcf */ | 
 | 	rc = lpfc_unregister_fcf_prep(phba); | 
 | 	if (rc) { | 
 | 		lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, | 
 | 				"2749 Failed to prepare for unregistering " | 
 | 				"HBA's FCF record: rc=%d\n", rc); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	/* Now, unregister FCF record and reset HBA FCF state */ | 
 | 	rc = lpfc_sli4_unregister_fcf(phba); | 
 | 	if (rc) | 
 | 		return; | 
 | 	/* Set proper HBA FCF states after successful unregister FCF */ | 
 | 	spin_lock_irq(&phba->hbalock); | 
 | 	phba->fcf.fcf_flag &= ~FCF_REGISTERED; | 
 | 	spin_unlock_irq(&phba->hbalock); | 
 | } | 
 |  | 
 | /** | 
 |  * lpfc_unregister_unused_fcf - Unregister FCF if all devices are disconnected. | 
 |  * @phba: Pointer to hba context object. | 
 |  * | 
 |  * This function check if there are any connected remote port for the FCF and | 
 |  * if all the devices are disconnected, this function unregister FCFI. | 
 |  * This function also tries to use another FCF for discovery. | 
 |  */ | 
 | void | 
 | lpfc_unregister_unused_fcf(struct lpfc_hba *phba) | 
 | { | 
 | 	/* | 
 | 	 * If HBA is not running in FIP mode, if HBA does not support | 
 | 	 * FCoE, if FCF discovery is ongoing, or if FCF has not been | 
 | 	 * registered, do nothing. | 
 | 	 */ | 
 | 	spin_lock_irq(&phba->hbalock); | 
 | 	if (!test_bit(HBA_FCOE_MODE, &phba->hba_flag) || | 
 | 	    !(phba->fcf.fcf_flag & FCF_REGISTERED) || | 
 | 	    !test_bit(HBA_FIP_SUPPORT, &phba->hba_flag) || | 
 | 	    (phba->fcf.fcf_flag & FCF_DISCOVERY) || | 
 | 	    phba->pport->port_state == LPFC_FLOGI) { | 
 | 		spin_unlock_irq(&phba->hbalock); | 
 | 		return; | 
 | 	} | 
 | 	spin_unlock_irq(&phba->hbalock); | 
 |  | 
 | 	if (lpfc_fcf_inuse(phba)) | 
 | 		return; | 
 |  | 
 | 	lpfc_unregister_fcf_rescan(phba); | 
 | } | 
 |  | 
 | /** | 
 |  * lpfc_read_fcf_conn_tbl - Create driver FCF connection table. | 
 |  * @phba: Pointer to hba context object. | 
 |  * @buff: Buffer containing the FCF connection table as in the config | 
 |  *         region. | 
 |  * This function create driver data structure for the FCF connection | 
 |  * record table read from config region 23. | 
 |  */ | 
 | static void | 
 | lpfc_read_fcf_conn_tbl(struct lpfc_hba *phba, | 
 | 	uint8_t *buff) | 
 | { | 
 | 	struct lpfc_fcf_conn_entry *conn_entry, *next_conn_entry; | 
 | 	struct lpfc_fcf_conn_hdr *conn_hdr; | 
 | 	struct lpfc_fcf_conn_rec *conn_rec; | 
 | 	uint32_t record_count; | 
 | 	int i; | 
 |  | 
 | 	/* Free the current connect table */ | 
 | 	list_for_each_entry_safe(conn_entry, next_conn_entry, | 
 | 		&phba->fcf_conn_rec_list, list) { | 
 | 		list_del_init(&conn_entry->list); | 
 | 		kfree(conn_entry); | 
 | 	} | 
 |  | 
 | 	conn_hdr = (struct lpfc_fcf_conn_hdr *) buff; | 
 | 	record_count = conn_hdr->length * sizeof(uint32_t)/ | 
 | 		sizeof(struct lpfc_fcf_conn_rec); | 
 |  | 
 | 	conn_rec = (struct lpfc_fcf_conn_rec *) | 
 | 		(buff + sizeof(struct lpfc_fcf_conn_hdr)); | 
 |  | 
 | 	for (i = 0; i < record_count; i++) { | 
 | 		if (!(conn_rec[i].flags & FCFCNCT_VALID)) | 
 | 			continue; | 
 | 		conn_entry = kzalloc(sizeof(struct lpfc_fcf_conn_entry), | 
 | 			GFP_KERNEL); | 
 | 		if (!conn_entry) { | 
 | 			lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, | 
 | 					"2566 Failed to allocate connection" | 
 | 					" table entry\n"); | 
 | 			return; | 
 | 		} | 
 |  | 
 | 		memcpy(&conn_entry->conn_rec, &conn_rec[i], | 
 | 			sizeof(struct lpfc_fcf_conn_rec)); | 
 | 		list_add_tail(&conn_entry->list, | 
 | 			&phba->fcf_conn_rec_list); | 
 | 	} | 
 |  | 
 | 	if (!list_empty(&phba->fcf_conn_rec_list)) { | 
 | 		i = 0; | 
 | 		list_for_each_entry(conn_entry, &phba->fcf_conn_rec_list, | 
 | 				    list) { | 
 | 			conn_rec = &conn_entry->conn_rec; | 
 | 			lpfc_printf_log(phba, KERN_INFO, LOG_INIT, | 
 | 					"3345 FCF connection list rec[%02d]: " | 
 | 					"flags:x%04x, vtag:x%04x, " | 
 | 					"fabric_name:x%02x:%02x:%02x:%02x:" | 
 | 					"%02x:%02x:%02x:%02x, " | 
 | 					"switch_name:x%02x:%02x:%02x:%02x:" | 
 | 					"%02x:%02x:%02x:%02x\n", i++, | 
 | 					conn_rec->flags, conn_rec->vlan_tag, | 
 | 					conn_rec->fabric_name[0], | 
 | 					conn_rec->fabric_name[1], | 
 | 					conn_rec->fabric_name[2], | 
 | 					conn_rec->fabric_name[3], | 
 | 					conn_rec->fabric_name[4], | 
 | 					conn_rec->fabric_name[5], | 
 | 					conn_rec->fabric_name[6], | 
 | 					conn_rec->fabric_name[7], | 
 | 					conn_rec->switch_name[0], | 
 | 					conn_rec->switch_name[1], | 
 | 					conn_rec->switch_name[2], | 
 | 					conn_rec->switch_name[3], | 
 | 					conn_rec->switch_name[4], | 
 | 					conn_rec->switch_name[5], | 
 | 					conn_rec->switch_name[6], | 
 | 					conn_rec->switch_name[7]); | 
 | 		} | 
 | 	} | 
 | } | 
 |  | 
 | /** | 
 |  * lpfc_read_fcoe_param - Read FCoe parameters from conf region.. | 
 |  * @phba: Pointer to hba context object. | 
 |  * @buff: Buffer containing the FCoE parameter data structure. | 
 |  * | 
 |  *  This function update driver data structure with config | 
 |  *  parameters read from config region 23. | 
 |  */ | 
 | static void | 
 | lpfc_read_fcoe_param(struct lpfc_hba *phba, | 
 | 			uint8_t *buff) | 
 | { | 
 | 	struct lpfc_fip_param_hdr *fcoe_param_hdr; | 
 | 	struct lpfc_fcoe_params *fcoe_param; | 
 |  | 
 | 	fcoe_param_hdr = (struct lpfc_fip_param_hdr *) | 
 | 		buff; | 
 | 	fcoe_param = (struct lpfc_fcoe_params *) | 
 | 		(buff + sizeof(struct lpfc_fip_param_hdr)); | 
 |  | 
 | 	if ((fcoe_param_hdr->parm_version != FIPP_VERSION) || | 
 | 		(fcoe_param_hdr->length != FCOE_PARAM_LENGTH)) | 
 | 		return; | 
 |  | 
 | 	if (fcoe_param_hdr->parm_flags & FIPP_VLAN_VALID) { | 
 | 		phba->valid_vlan = 1; | 
 | 		phba->vlan_id = le16_to_cpu(fcoe_param->vlan_tag) & | 
 | 			0xFFF; | 
 | 	} | 
 |  | 
 | 	phba->fc_map[0] = fcoe_param->fc_map[0]; | 
 | 	phba->fc_map[1] = fcoe_param->fc_map[1]; | 
 | 	phba->fc_map[2] = fcoe_param->fc_map[2]; | 
 | 	return; | 
 | } | 
 |  | 
 | /** | 
 |  * lpfc_get_rec_conf23 - Get a record type in config region data. | 
 |  * @buff: Buffer containing config region 23 data. | 
 |  * @size: Size of the data buffer. | 
 |  * @rec_type: Record type to be searched. | 
 |  * | 
 |  * This function searches config region data to find the beginning | 
 |  * of the record specified by record_type. If record found, this | 
 |  * function return pointer to the record else return NULL. | 
 |  */ | 
 | static uint8_t * | 
 | lpfc_get_rec_conf23(uint8_t *buff, uint32_t size, uint8_t rec_type) | 
 | { | 
 | 	uint32_t offset = 0, rec_length; | 
 |  | 
 | 	if ((buff[0] == LPFC_REGION23_LAST_REC) || | 
 | 		(size < sizeof(uint32_t))) | 
 | 		return NULL; | 
 |  | 
 | 	rec_length = buff[offset + 1]; | 
 |  | 
 | 	/* | 
 | 	 * One TLV record has one word header and number of data words | 
 | 	 * specified in the rec_length field of the record header. | 
 | 	 */ | 
 | 	while ((offset + rec_length * sizeof(uint32_t) + sizeof(uint32_t)) | 
 | 		<= size) { | 
 | 		if (buff[offset] == rec_type) | 
 | 			return &buff[offset]; | 
 |  | 
 | 		if (buff[offset] == LPFC_REGION23_LAST_REC) | 
 | 			return NULL; | 
 |  | 
 | 		offset += rec_length * sizeof(uint32_t) + sizeof(uint32_t); | 
 | 		rec_length = buff[offset + 1]; | 
 | 	} | 
 | 	return NULL; | 
 | } | 
 |  | 
 | /** | 
 |  * lpfc_parse_fcoe_conf - Parse FCoE config data read from config region 23. | 
 |  * @phba: Pointer to lpfc_hba data structure. | 
 |  * @buff: Buffer containing config region 23 data. | 
 |  * @size: Size of the data buffer. | 
 |  * | 
 |  * This function parses the FCoE config parameters in config region 23 and | 
 |  * populate driver data structure with the parameters. | 
 |  */ | 
 | void | 
 | lpfc_parse_fcoe_conf(struct lpfc_hba *phba, | 
 | 		uint8_t *buff, | 
 | 		uint32_t size) | 
 | { | 
 | 	uint32_t offset = 0; | 
 | 	uint8_t *rec_ptr; | 
 |  | 
 | 	/* | 
 | 	 * If data size is less than 2 words signature and version cannot be | 
 | 	 * verified. | 
 | 	 */ | 
 | 	if (size < 2*sizeof(uint32_t)) | 
 | 		return; | 
 |  | 
 | 	/* Check the region signature first */ | 
 | 	if (memcmp(buff, LPFC_REGION23_SIGNATURE, 4)) { | 
 | 		lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, | 
 | 			"2567 Config region 23 has bad signature\n"); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	offset += 4; | 
 |  | 
 | 	/* Check the data structure version */ | 
 | 	if (buff[offset] != LPFC_REGION23_VERSION) { | 
 | 		lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, | 
 | 				"2568 Config region 23 has bad version\n"); | 
 | 		return; | 
 | 	} | 
 | 	offset += 4; | 
 |  | 
 | 	/* Read FCoE param record */ | 
 | 	rec_ptr = lpfc_get_rec_conf23(&buff[offset], | 
 | 			size - offset, FCOE_PARAM_TYPE); | 
 | 	if (rec_ptr) | 
 | 		lpfc_read_fcoe_param(phba, rec_ptr); | 
 |  | 
 | 	/* Read FCF connection table */ | 
 | 	rec_ptr = lpfc_get_rec_conf23(&buff[offset], | 
 | 		size - offset, FCOE_CONN_TBL_TYPE); | 
 | 	if (rec_ptr) | 
 | 		lpfc_read_fcf_conn_tbl(phba, rec_ptr); | 
 |  | 
 | } | 
 |  | 
 | /* | 
 |  * lpfc_error_lost_link - IO failure from link event or FW reset check. | 
 |  * | 
 |  * @vport: Pointer to lpfc_vport data structure. | 
 |  * @ulp_status: IO completion status. | 
 |  * @ulp_word4: Reason code for the ulp_status. | 
 |  * | 
 |  * This function evaluates the ulp_status and ulp_word4 values | 
 |  * for specific error values that indicate an internal link fault | 
 |  * or fw reset event for the completing IO.  Callers require this | 
 |  * common data to decide next steps on the IO. | 
 |  * | 
 |  * Return: | 
 |  * false - No link or reset error occurred. | 
 |  * true - A link or reset error occurred. | 
 |  */ | 
 | bool | 
 | lpfc_error_lost_link(struct lpfc_vport *vport, u32 ulp_status, u32 ulp_word4) | 
 | { | 
 | 	/* Mask off the extra port data to get just the reason code. */ | 
 | 	u32 rsn_code = IOERR_PARAM_MASK & ulp_word4; | 
 |  | 
 | 	if (ulp_status == IOSTAT_LOCAL_REJECT && | 
 | 	    (rsn_code == IOERR_SLI_ABORTED || | 
 | 	     rsn_code == IOERR_LINK_DOWN || | 
 | 	     rsn_code == IOERR_SLI_DOWN)) { | 
 | 		lpfc_printf_vlog(vport, KERN_WARNING, LOG_SLI | LOG_ELS, | 
 | 				 "0408 Report link error true: <x%x:x%x>\n", | 
 | 				 ulp_status, ulp_word4); | 
 | 		return true; | 
 | 	} | 
 |  | 
 | 	return false; | 
 | } |