| // SPDX-License-Identifier: GPL-2.0-only | 
 | /* | 
 |  * fpu.c - save/restore of Floating Point Unit Registers on task switch | 
 |  * | 
 |  * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com) | 
 |  */ | 
 |  | 
 | #include <linux/sched.h> | 
 | #include <asm/fpu.h> | 
 |  | 
 | #ifdef CONFIG_ISA_ARCOMPACT | 
 |  | 
 | /* | 
 |  * To save/restore FPU regs, simplest scheme would use LR/SR insns. | 
 |  * However since SR serializes the pipeline, an alternate "hack" can be used | 
 |  * which uses the FPU Exchange insn (DEXCL) to r/w FPU regs. | 
 |  * | 
 |  * Store to 64bit dpfp1 reg from a pair of core regs: | 
 |  *   dexcl1 0, r1, r0  ; where r1:r0 is the 64 bit val | 
 |  * | 
 |  * Read from dpfp1 into pair of core regs (w/o clobbering dpfp1) | 
 |  *   mov_s    r3, 0 | 
 |  *   daddh11  r1, r3, r3   ; get "hi" into r1 (dpfp1 unchanged) | 
 |  *   dexcl1   r0, r1, r3   ; get "low" into r0 (dpfp1 low clobbered) | 
 |  *   dexcl1    0, r1, r0   ; restore dpfp1 to orig value | 
 |  * | 
 |  * However we can tweak the read, so that read-out of outgoing task's FPU regs | 
 |  * and write of incoming task's regs happen in one shot. So all the work is | 
 |  * done before context switch | 
 |  */ | 
 |  | 
 | void fpu_save_restore(struct task_struct *prev, struct task_struct *next) | 
 | { | 
 | 	unsigned int *saveto = &prev->thread.fpu.aux_dpfp[0].l; | 
 | 	unsigned int *readfrom = &next->thread.fpu.aux_dpfp[0].l; | 
 |  | 
 | 	const unsigned int zero = 0; | 
 |  | 
 | 	__asm__ __volatile__( | 
 | 		"daddh11  %0, %2, %2\n" | 
 | 		"dexcl1   %1, %3, %4\n" | 
 | 		: "=&r" (*(saveto + 1)), /* early clobber must here */ | 
 | 		  "=&r" (*(saveto)) | 
 | 		: "r" (zero), "r" (*(readfrom + 1)), "r" (*(readfrom)) | 
 | 	); | 
 |  | 
 | 	__asm__ __volatile__( | 
 | 		"daddh22  %0, %2, %2\n" | 
 | 		"dexcl2   %1, %3, %4\n" | 
 | 		: "=&r"(*(saveto + 3)),	/* early clobber must here */ | 
 | 		  "=&r"(*(saveto + 2)) | 
 | 		: "r" (zero), "r" (*(readfrom + 3)), "r" (*(readfrom + 2)) | 
 | 	); | 
 | } | 
 |  | 
 | #else | 
 |  | 
 | void fpu_init_task(struct pt_regs *regs) | 
 | { | 
 | 	const unsigned int fwe = 0x80000000; | 
 |  | 
 | 	/* default rounding mode */ | 
 | 	write_aux_reg(ARC_REG_FPU_CTRL, 0x100); | 
 |  | 
 | 	/* Initialize to zero: setting requires FWE be set */ | 
 | 	write_aux_reg(ARC_REG_FPU_STATUS, fwe); | 
 | } | 
 |  | 
 | void fpu_save_restore(struct task_struct *prev, struct task_struct *next) | 
 | { | 
 | 	struct arc_fpu *save = &prev->thread.fpu; | 
 | 	struct arc_fpu *restore = &next->thread.fpu; | 
 | 	const unsigned int fwe = 0x80000000; | 
 |  | 
 | 	save->ctrl = read_aux_reg(ARC_REG_FPU_CTRL); | 
 | 	save->status = read_aux_reg(ARC_REG_FPU_STATUS); | 
 |  | 
 | 	write_aux_reg(ARC_REG_FPU_CTRL, restore->ctrl); | 
 | 	write_aux_reg(ARC_REG_FPU_STATUS, (fwe | restore->status)); | 
 | } | 
 |  | 
 | #endif |