arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts - linux - Git at Google

 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Copyright (c) 2016 Andreas Färber
  * Copyright (c) 2016 BayLibre, Inc.
  * Author: Kevin Hilman <khilman@kernel.org>
  */

 /dts-v1/;

 #include "meson-gxbb.dtsi"
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/sound/meson-aiu.h>

 / {
 	compatible = "hardkernel,odroid-c2", "amlogic,meson-gxbb";
 	model = "Hardkernel ODROID-C2";

 	aliases {
 		serial0 = &uart_AO;
 		ethernet0 = &ethmac;
 	};

 	chosen {
 		stdout-path = "serial0:115200n8";
 	};

 	memory@0 {
 		device_type = "memory";
 		reg = <0x0 0x0 0x0 0x80000000>;
 	};

 	usb_otg_pwr: regulator-usb-pwrs {
 		compatible = "regulator-fixed";

 		regulator-name = "USB_OTG_PWR";

 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;

 		/*
 		 * signal name from schematics: PWREN
 		 */
 		gpio = <&gpio_ao GPIOAO_5 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 		/*
 		 * signal name from schematics: USB_POWER
 		 */
 		vin-supply = <&p5v0>;
 	};

 	leds {
 		compatible = "gpio-leds";
 		led-blue {
 			label = "c2:blue:alive";
 			gpios = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "heartbeat";
 			default-state = "off";
 		};
 	};

 	p5v0: regulator-p5v0 {
 		compatible = "regulator-fixed";

 		regulator-name = "P5V0";
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
 		regulator-always-on;
 	};

 	hdmi_p5v0: regulator-hdmi-p5v0 {
 		compatible = "regulator-fixed";
 		regulator-name = "HDMI_P5V0";
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
 		/* AP2331SA-7 */
 		vin-supply = <&p5v0>;
 	};

 	tflash_vdd: regulator-tflash-vdd {
 		compatible = "regulator-fixed";

 		regulator-name = "TFLASH_VDD";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;

 		/*
 		 * signal name from schematics: TFLASH_VDD_EN
 		 */
 		gpio = <&gpio GPIOY_12 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 		/* U16 RT9179GB */
 		vin-supply = <&vddio_ao3v3>;
 	};

 	tf_io: gpio-regulator-tf-io {
 		compatible = "regulator-gpio";

 		regulator-name = "TF_IO";
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <3300000>;

 		/*
 		 * signal name from schematics: TF_3V3N_1V8_EN
 		 */
 		gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_HIGH>;
 		gpios-states = <0>;

 		states = <3300000 0>,
 			 <1800000 1>;
 		/* U12/U13 RT9179GB */
 		vin-supply = <&vddio_ao3v3>;
 	};

 	vcc1v8: regulator-vcc1v8 {
 		compatible = "regulator-fixed";
 		regulator-name = "VCC1V8";
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <1800000>;
 		regulator-always-on;
 		/* U18 RT9179GB */
 		vin-supply = <&vddio_ao3v3>;
 	};

 	vcc3v3: regulator-vcc3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VCC3V3";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 	};

 	vddio_ao1v8: regulator-vddio-ao1v8 {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDIO_AO1V8";
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <1800000>;
 		regulator-always-on;
 		/* U17 RT9179GB */
 		vin-supply = <&p5v0>;
 	};

 	vddio_ao3v3: regulator-vddio-ao3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDIO_AO3V3";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 		regulator-always-on;
 		/* U11 MP2161GJ-C499 */
 		vin-supply = <&p5v0>;
 	};

 	ddr3_1v5: regulator-ddr3-1v5 {
 		compatible = "regulator-fixed";
 		regulator-name = "DDR3_1V5";
 		regulator-min-microvolt = <1500000>;
 		regulator-max-microvolt = <1500000>;
 		regulator-always-on;
 		/* U15 MP2161GJ-C499 */
 		vin-supply = <&p5v0>;
 	};

 	emmc_pwrseq: emmc-pwrseq {
 		compatible = "mmc-pwrseq-emmc";
 		reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
 	};

 	hdmi-connector {
 		compatible = "hdmi-connector";
 		type = "a";

 		port {
 			hdmi_connector_in: endpoint {
 				remote-endpoint = <&hdmi_tx_tmds_out>;
 			};
 		};
 	};

 	sound {
 		compatible = "amlogic,gx-sound-card";
 		model = "ODROID-C2";
 		clocks = <&clkc CLKID_MPLL0>,
 			 <&clkc CLKID_MPLL1>,
 			 <&clkc CLKID_MPLL2>;

 		assigned-clocks = <&clkc CLKID_MPLL0>,
 				  <&clkc CLKID_MPLL1>,
 				  <&clkc CLKID_MPLL2>;
 		assigned-clock-parents = <0>, <0>, <0>;
 		assigned-clock-rates = <294912000>,
 				       <270950400>,
 				       <393216000>;

 		dai-link-0 {
 			sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>;
 		};

 		dai-link-1 {
 			sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>;
 			dai-format = "i2s";
 			mclk-fs = <256>;

 			codec-0 {
 				sound-dai = <&aiu AIU_HDMI CTRL_I2S>;
 			};
 		};

 		dai-link-2 {
 			sound-dai = <&aiu AIU_HDMI CTRL_OUT>;

 			codec-0 {
 				sound-dai = <&hdmi_tx>;
 			};
 		};
 	};
 };

 &aiu {
 	status = "okay";
 };

 &cec_AO {
 	status = "okay";
 	pinctrl-0 = <&ao_cec_pins>;
 	pinctrl-names = "default";
 	hdmi-phandle = <&hdmi_tx>;
 };

 &ethmac {
 	status = "okay";
 	pinctrl-0 = <&eth_rgmii_pins>;
 	pinctrl-names = "default";
 	phy-handle = <&eth_phy0>;
 	phy-mode = "rgmii";

 	amlogic,tx-delay-ns = <2>;

 	mdio {
 		compatible = "snps,dwmac-mdio";
 		#address-cells = <1>;
 		#size-cells = <0>;

 		eth_phy0: ethernet-phy@0 {
 			/* Realtek RTL8211F (0x001cc916) */
 			reg = <0>;

 			reset-assert-us = <10000>;
 			reset-deassert-us = <80000>;
 			reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>;

 			interrupt-parent = <&gpio_intc>;
 			/* MAC_INTR on GPIOZ_15 */
 			interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
 		};
 	};
 };

 &hdmi_tx {
 	status = "okay";
 	pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
 	pinctrl-names = "default";
 	hdmi-supply = <&hdmi_p5v0>;
 };

 &hdmi_tx_tmds_port {
 	hdmi_tx_tmds_out: endpoint {
 		remote-endpoint = <&hdmi_connector_in>;
 	};
 };

 &i2c_A {
 	status = "okay";
 	pinctrl-0 = <&i2c_a_pins>;
 	pinctrl-names = "default";
 };

 &ir {
 	status = "okay";
 	pinctrl-0 = <&remote_input_ao_pins>;
 	pinctrl-names = "default";
 	linux,rc-map-name = "rc-odroid";
 };

 &gpio_ao {
 	gpio-line-names = "UART TX", "UART RX", "VCCK En", "TF 3V3/1V8 En",
 			  "USB HUB nRESET", "USB OTG Power En",
 			  "J7 Header Pin2", "IR In", "J7 Header Pin4",
 			  "J7 Header Pin6", "J7 Header Pin5", "J7 Header Pin7",
 			  "HDMI CEC", "SYS LED",
 			  /* GPIO_TEST_N */
 			  "";
 };

 &gpio {
 	gpio-line-names = /* Bank GPIOZ */
 			  "Eth MDIO", "Eth MDC", "Eth RGMII RX Clk",
 			  "Eth RX DV", "Eth RX D0", "Eth RX D1", "Eth RX D2",
 			  "Eth RX D3", "Eth RGMII TX Clk", "Eth TX En",
 			  "Eth TX D0", "Eth TX D1", "Eth TX D2", "Eth TX D3",
 			  "Eth PHY nRESET", "Eth PHY Intc",
 			  /* Bank GPIOH */
 			  "HDMI HPD", "HDMI DDC SDA", "HDMI DDC SCL", "",
 			  /* Bank BOOT */
 			  "eMMC D0", "eMMC D1", "eMMC D2", "eMMC D3", "eMMC D4",
 			  "eMMC D5", "eMMC D6", "eMMC D7", "eMMC Clk",
 			  "eMMC Reset", "eMMC CMD",
 			  "", "", "", "", "", "", "",
 			  /* Bank CARD */
 			  "SDCard D1", "SDCard D0", "SDCard CLK", "SDCard CMD",
 			  "SDCard D3", "SDCard D2", "SDCard Det",
 			  /* Bank GPIODV */
 			  "", "", "", "", "", "", "", "", "", "", "", "", "",
 			  "", "", "", "", "", "", "", "", "", "", "",
 			  "I2C A SDA", "I2C A SCK", "I2C B SDA", "I2C B SCK",
 			  "PWM D", "PWM B",
 			  /* Bank GPIOY */
 			  "Revision Bit0", "Revision Bit1", "",
 			  "J2 Header Pin35", "", "", "", "J2 Header Pin36",
 			  "J2 Header Pin31", "", "", "", "TF VDD En",
 			  "J2 Header Pin32", "J2 Header Pin26", "", "",
 			  /* Bank GPIOX */
 			  "J2 Header Pin29", "J2 Header Pin24",
 			  "J2 Header Pin23", "J2 Header Pin22",
 			  "J2 Header Pin21", "J2 Header Pin18",
 			  "J2 Header Pin33", "J2 Header Pin19",
 			  "J2 Header Pin16", "J2 Header Pin15",
 			  "J2 Header Pin12", "J2 Header Pin13",
 			  "J2 Header Pin8", "J2 Header Pin10",
 			  "", "", "", "", "",
 			  "J2 Header Pin11", "", "J2 Header Pin7", "",
 			  /* Bank GPIOCLK */
 			  "", "", "", "";
 };

 &saradc {
 	status = "okay";
 	vref-supply = <&vcc1v8>;
 };

 &scpi_clocks {
 	status = "disabled";
 };

 /* SD */
 &sd_emmc_b {
 	status = "okay";
 	pinctrl-0 = <&sdcard_pins>;
 	pinctrl-1 = <&sdcard_clk_gate_pins>;
 	pinctrl-names = "default", "clk-gate";

 	bus-width = <4>;
 	cap-sd-highspeed;
 	sd-uhs-sdr12;
 	sd-uhs-sdr25;
 	sd-uhs-sdr50;
 	sd-uhs-ddr50;
 	max-frequency = <100000000>;
 	disable-wp;

 	cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;

 	vmmc-supply = <&tflash_vdd>;
 	vqmmc-supply = <&tf_io>;
 };

 /* eMMC */
 &sd_emmc_c {
 	status = "okay";
 	pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
 	pinctrl-1 = <&emmc_clk_gate_pins>;
 	pinctrl-names = "default", "clk-gate";

 	bus-width = <8>;
 	max-frequency = <200000000>;
 	non-removable;
 	disable-wp;
 	cap-mmc-highspeed;
 	mmc-ddr-1_8v;
 	mmc-hs200-1_8v;

 	mmc-pwrseq = <&emmc_pwrseq>;
 	vmmc-supply = <&vcc3v3>;
 	vqmmc-supply = <&vcc1v8>;
 };

 &uart_AO {
 	status = "okay";
 	pinctrl-0 = <&uart_ao_a_pins>;
 	pinctrl-names = "default";
 };

 &usb0_phy {
 	status = "disabled";
 	phy-supply = <&usb_otg_pwr>;
 };

 &usb1_phy {
 	status = "okay";
 	phy-supply = <&usb_otg_pwr>;
 };

 &usb0 {
 	status = "disabled";
 };

 &usb1 {
 	dr_mode = "host";
 	#address-cells = <1>;
 	#size-cells = <0>;
 	status = "okay";

 	hub@1 {
 		/* Genesys Logic GL852G USB 2.0 hub */
 		compatible = "usb5e3,610";
 		reg = <1>;
 		vdd-supply = <&p5v0>;
 		reset-gpios = <&gpio_ao GPIOAO_4 GPIO_ACTIVE_LOW>;
 	};
 };
	// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
	/*
	* Copyright (c) 2016 Andreas Färber
	* Copyright (c) 2016 BayLibre, Inc.
	* Author: Kevin Hilman <khilman@kernel.org>
	*/

	/dts-v1/;

	#include "meson-gxbb.dtsi"
	#include <dt-bindings/gpio/gpio.h>
	#include <dt-bindings/sound/meson-aiu.h>

	/ {
	compatible = "hardkernel,odroid-c2", "amlogic,meson-gxbb";
	model = "Hardkernel ODROID-C2";

	aliases {
	serial0 = &uart_AO;
	ethernet0 = &ethmac;
	};

	chosen {
	stdout-path = "serial0:115200n8";
	};

	memory@0 {
	device_type = "memory";
	reg = <0x0 0x0 0x0 0x80000000>;
	};

	usb_otg_pwr: regulator-usb-pwrs {
	compatible = "regulator-fixed";

	regulator-name = "USB_OTG_PWR";

	regulator-min-microvolt = <5000000>;
	regulator-max-microvolt = <5000000>;

	/*
	* signal name from schematics: PWREN
	*/
	gpio = <&gpio_ao GPIOAO_5 GPIO_ACTIVE_HIGH>;
	enable-active-high;
	/*
	* signal name from schematics: USB_POWER
	*/
	vin-supply = <&p5v0>;
	};

	leds {
	compatible = "gpio-leds";
	led-blue {
	label = "c2:blue:alive";
	gpios = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_LOW>;
	linux,default-trigger = "heartbeat";
	default-state = "off";
	};
	};

	p5v0: regulator-p5v0 {
	compatible = "regulator-fixed";

	regulator-name = "P5V0";
	regulator-min-microvolt = <5000000>;
	regulator-max-microvolt = <5000000>;
	regulator-always-on;
	};

	hdmi_p5v0: regulator-hdmi-p5v0 {
	compatible = "regulator-fixed";
	regulator-name = "HDMI_P5V0";
	regulator-min-microvolt = <5000000>;
	regulator-max-microvolt = <5000000>;
	/* AP2331SA-7 */
	vin-supply = <&p5v0>;
	};

	tflash_vdd: regulator-tflash-vdd {
	compatible = "regulator-fixed";

	regulator-name = "TFLASH_VDD";
	regulator-min-microvolt = <3300000>;
	regulator-max-microvolt = <3300000>;

	/*
	* signal name from schematics: TFLASH_VDD_EN
	*/
	gpio = <&gpio GPIOY_12 GPIO_ACTIVE_HIGH>;
	enable-active-high;
	/* U16 RT9179GB */
	vin-supply = <&vddio_ao3v3>;
	};

	tf_io: gpio-regulator-tf-io {
	compatible = "regulator-gpio";

	regulator-name = "TF_IO";
	regulator-min-microvolt = <1800000>;
	regulator-max-microvolt = <3300000>;

	/*
	* signal name from schematics: TF_3V3N_1V8_EN
	*/
	gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_HIGH>;
	gpios-states = <0>;

	states = <3300000 0>,
	<1800000 1>;
	/* U12/U13 RT9179GB */
	vin-supply = <&vddio_ao3v3>;
	};

	vcc1v8: regulator-vcc1v8 {
	compatible = "regulator-fixed";
	regulator-name = "VCC1V8";
	regulator-min-microvolt = <1800000>;
	regulator-max-microvolt = <1800000>;
	regulator-always-on;
	/* U18 RT9179GB */
	vin-supply = <&vddio_ao3v3>;
	};

	vcc3v3: regulator-vcc3v3 {
	compatible = "regulator-fixed";
	regulator-name = "VCC3V3";
	regulator-min-microvolt = <3300000>;
	regulator-max-microvolt = <3300000>;
	};

	vddio_ao1v8: regulator-vddio-ao1v8 {
	compatible = "regulator-fixed";
	regulator-name = "VDDIO_AO1V8";
	regulator-min-microvolt = <1800000>;
	regulator-max-microvolt = <1800000>;
	regulator-always-on;
	/* U17 RT9179GB */
	vin-supply = <&p5v0>;
	};

	vddio_ao3v3: regulator-vddio-ao3v3 {
	compatible = "regulator-fixed";
	regulator-name = "VDDIO_AO3V3";
	regulator-min-microvolt = <3300000>;
	regulator-max-microvolt = <3300000>;
	regulator-always-on;
	/* U11 MP2161GJ-C499 */
	vin-supply = <&p5v0>;
	};

	ddr3_1v5: regulator-ddr3-1v5 {
	compatible = "regulator-fixed";
	regulator-name = "DDR3_1V5";
	regulator-min-microvolt = <1500000>;
	regulator-max-microvolt = <1500000>;
	regulator-always-on;
	/* U15 MP2161GJ-C499 */
	vin-supply = <&p5v0>;
	};

	emmc_pwrseq: emmc-pwrseq {
	compatible = "mmc-pwrseq-emmc";
	reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
	};

	hdmi-connector {
	compatible = "hdmi-connector";
	type = "a";

	port {
	hdmi_connector_in: endpoint {
	remote-endpoint = <&hdmi_tx_tmds_out>;
	};
	};
	};

	sound {
	compatible = "amlogic,gx-sound-card";
	model = "ODROID-C2";
	clocks = <&clkc CLKID_MPLL0>,
	<&clkc CLKID_MPLL1>,
	<&clkc CLKID_MPLL2>;

	assigned-clocks = <&clkc CLKID_MPLL0>,
	<&clkc CLKID_MPLL1>,
	<&clkc CLKID_MPLL2>;
	assigned-clock-parents = <0>, <0>, <0>;
	assigned-clock-rates = <294912000>,
	<270950400>,
	<393216000>;

	dai-link-0 {
	sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>;
	};

	dai-link-1 {
	sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>;
	dai-format = "i2s";
	mclk-fs = <256>;

	codec-0 {
	sound-dai = <&aiu AIU_HDMI CTRL_I2S>;
	};
	};

	dai-link-2 {
	sound-dai = <&aiu AIU_HDMI CTRL_OUT>;

	codec-0 {
	sound-dai = <&hdmi_tx>;
	};
	};
	};
	};

	&aiu {
	status = "okay";
	};

	&cec_AO {
	status = "okay";
	pinctrl-0 = <&ao_cec_pins>;
	pinctrl-names = "default";
	hdmi-phandle = <&hdmi_tx>;
	};

	&ethmac {
	status = "okay";
	pinctrl-0 = <&eth_rgmii_pins>;
	pinctrl-names = "default";
	phy-handle = <&eth_phy0>;
	phy-mode = "rgmii";

	amlogic,tx-delay-ns = <2>;

	mdio {
	compatible = "snps,dwmac-mdio";
	#address-cells = <1>;
	#size-cells = <0>;

	eth_phy0: ethernet-phy@0 {
	/* Realtek RTL8211F (0x001cc916) */
	reg = <0>;

	reset-assert-us = <10000>;
	reset-deassert-us = <80000>;
	reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>;

	interrupt-parent = <&gpio_intc>;
	/* MAC_INTR on GPIOZ_15 */
	interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
	};
	};
	};

	&hdmi_tx {
	status = "okay";
	pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
	pinctrl-names = "default";
	hdmi-supply = <&hdmi_p5v0>;
	};

	&hdmi_tx_tmds_port {
	hdmi_tx_tmds_out: endpoint {
	remote-endpoint = <&hdmi_connector_in>;
	};
	};

	&i2c_A {
	status = "okay";
	pinctrl-0 = <&i2c_a_pins>;
	pinctrl-names = "default";
	};

	&ir {
	status = "okay";
	pinctrl-0 = <&remote_input_ao_pins>;
	pinctrl-names = "default";
	linux,rc-map-name = "rc-odroid";
	};

	&gpio_ao {
	gpio-line-names = "UART TX", "UART RX", "VCCK En", "TF 3V3/1V8 En",
	"USB HUB nRESET", "USB OTG Power En",
	"J7 Header Pin2", "IR In", "J7 Header Pin4",
	"J7 Header Pin6", "J7 Header Pin5", "J7 Header Pin7",
	"HDMI CEC", "SYS LED",
	/* GPIO_TEST_N */
	"";
	};

	&gpio {
	gpio-line-names = /* Bank GPIOZ */
	"Eth MDIO", "Eth MDC", "Eth RGMII RX Clk",
	"Eth RX DV", "Eth RX D0", "Eth RX D1", "Eth RX D2",
	"Eth RX D3", "Eth RGMII TX Clk", "Eth TX En",
	"Eth TX D0", "Eth TX D1", "Eth TX D2", "Eth TX D3",
	"Eth PHY nRESET", "Eth PHY Intc",
	/* Bank GPIOH */
	"HDMI HPD", "HDMI DDC SDA", "HDMI DDC SCL", "",
	/* Bank BOOT */
	"eMMC D0", "eMMC D1", "eMMC D2", "eMMC D3", "eMMC D4",
	"eMMC D5", "eMMC D6", "eMMC D7", "eMMC Clk",
	"eMMC Reset", "eMMC CMD",
	"", "", "", "", "", "", "",
	/* Bank CARD */
	"SDCard D1", "SDCard D0", "SDCard CLK", "SDCard CMD",
	"SDCard D3", "SDCard D2", "SDCard Det",
	/* Bank GPIODV */
	"", "", "", "", "", "", "", "", "", "", "", "", "",
	"", "", "", "", "", "", "", "", "", "", "",
	"I2C A SDA", "I2C A SCK", "I2C B SDA", "I2C B SCK",
	"PWM D", "PWM B",
	/* Bank GPIOY */
	"Revision Bit0", "Revision Bit1", "",
	"J2 Header Pin35", "", "", "", "J2 Header Pin36",
	"J2 Header Pin31", "", "", "", "TF VDD En",
	"J2 Header Pin32", "J2 Header Pin26", "", "",
	/* Bank GPIOX */
	"J2 Header Pin29", "J2 Header Pin24",
	"J2 Header Pin23", "J2 Header Pin22",
	"J2 Header Pin21", "J2 Header Pin18",
	"J2 Header Pin33", "J2 Header Pin19",
	"J2 Header Pin16", "J2 Header Pin15",
	"J2 Header Pin12", "J2 Header Pin13",
	"J2 Header Pin8", "J2 Header Pin10",
	"", "", "", "", "",
	"J2 Header Pin11", "", "J2 Header Pin7", "",
	/* Bank GPIOCLK */
	"", "", "", "";
	};

	&saradc {
	status = "okay";
	vref-supply = <&vcc1v8>;
	};

	&scpi_clocks {
	status = "disabled";
	};

	/* SD */
	&sd_emmc_b {
	status = "okay";
	pinctrl-0 = <&sdcard_pins>;
	pinctrl-1 = <&sdcard_clk_gate_pins>;
	pinctrl-names = "default", "clk-gate";

	bus-width = <4>;
	cap-sd-highspeed;
	sd-uhs-sdr12;
	sd-uhs-sdr25;
	sd-uhs-sdr50;
	sd-uhs-ddr50;
	max-frequency = <100000000>;
	disable-wp;

	cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;

	vmmc-supply = <&tflash_vdd>;
	vqmmc-supply = <&tf_io>;
	};

	/* eMMC */
	&sd_emmc_c {
	status = "okay";
	pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
	pinctrl-1 = <&emmc_clk_gate_pins>;
	pinctrl-names = "default", "clk-gate";

	bus-width = <8>;
	max-frequency = <200000000>;
	non-removable;
	disable-wp;
	cap-mmc-highspeed;
	mmc-ddr-1_8v;
	mmc-hs200-1_8v;

	mmc-pwrseq = <&emmc_pwrseq>;
	vmmc-supply = <&vcc3v3>;
	vqmmc-supply = <&vcc1v8>;
	};

	&uart_AO {
	status = "okay";
	pinctrl-0 = <&uart_ao_a_pins>;
	pinctrl-names = "default";
	};

	&usb0_phy {
	status = "disabled";
	phy-supply = <&usb_otg_pwr>;
	};

	&usb1_phy {
	status = "okay";
	phy-supply = <&usb_otg_pwr>;
	};

	&usb0 {
	status = "disabled";
	};

	&usb1 {
	dr_mode = "host";
	#address-cells = <1>;
	#size-cells = <0>;
	status = "okay";

	hub@1 {
	/* Genesys Logic GL852G USB 2.0 hub */
	compatible = "usb5e3,610";
	reg = <1>;
	vdd-supply = <&p5v0>;
	reset-gpios = <&gpio_ao GPIOAO_4 GPIO_ACTIVE_LOW>;
	};
	};