|  | // SPDX-License-Identifier: GPL-2.0-or-later | 
|  | /* | 
|  | * Codec driver for ST STA350 2.1-channel high-efficiency digital audio system | 
|  | * | 
|  | * Copyright: 2014 Raumfeld GmbH | 
|  | * Author: Sven Brandau <info@brandau.biz> | 
|  | * | 
|  | * based on code from: | 
|  | *	Raumfeld GmbH | 
|  | *	  Johannes Stezenbach <js@sig21.net> | 
|  | *	Wolfson Microelectronics PLC. | 
|  | *	  Mark Brown <broonie@opensource.wolfsonmicro.com> | 
|  | *	Freescale Semiconductor, Inc. | 
|  | *	  Timur Tabi <timur@freescale.com> | 
|  | */ | 
|  |  | 
|  | #define pr_fmt(fmt) KBUILD_MODNAME ":%s:%d: " fmt, __func__, __LINE__ | 
|  |  | 
|  | #include <linux/module.h> | 
|  | #include <linux/moduleparam.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/delay.h> | 
|  | #include <linux/pm.h> | 
|  | #include <linux/i2c.h> | 
|  | #include <linux/of.h> | 
|  | #include <linux/regmap.h> | 
|  | #include <linux/regulator/consumer.h> | 
|  | #include <linux/gpio/consumer.h> | 
|  | #include <linux/slab.h> | 
|  | #include <sound/core.h> | 
|  | #include <sound/pcm.h> | 
|  | #include <sound/pcm_params.h> | 
|  | #include <sound/soc.h> | 
|  | #include <sound/soc-dapm.h> | 
|  | #include <sound/initval.h> | 
|  | #include <sound/tlv.h> | 
|  |  | 
|  | #include <sound/sta350.h> | 
|  | #include "sta350.h" | 
|  |  | 
|  | #define STA350_RATES (SNDRV_PCM_RATE_32000 | \ | 
|  | SNDRV_PCM_RATE_44100 | \ | 
|  | SNDRV_PCM_RATE_48000 | \ | 
|  | SNDRV_PCM_RATE_88200 | \ | 
|  | SNDRV_PCM_RATE_96000 | \ | 
|  | SNDRV_PCM_RATE_176400 | \ | 
|  | SNDRV_PCM_RATE_192000) | 
|  |  | 
|  | #define STA350_FORMATS \ | 
|  | (SNDRV_PCM_FMTBIT_S16_LE  | SNDRV_PCM_FMTBIT_S18_3LE | \ | 
|  | SNDRV_PCM_FMTBIT_S20_3LE | SNDRV_PCM_FMTBIT_S24_3LE | \ | 
|  | SNDRV_PCM_FMTBIT_S24_LE  | SNDRV_PCM_FMTBIT_S32_LE) | 
|  |  | 
|  | /* Power-up register defaults */ | 
|  | static const struct reg_default sta350_regs[] = { | 
|  | {  0x0, 0x63 }, | 
|  | {  0x1, 0x80 }, | 
|  | {  0x2, 0xdf }, | 
|  | {  0x3, 0x40 }, | 
|  | {  0x4, 0xc2 }, | 
|  | {  0x5, 0x5c }, | 
|  | {  0x6, 0x00 }, | 
|  | {  0x7, 0xff }, | 
|  | {  0x8, 0x60 }, | 
|  | {  0x9, 0x60 }, | 
|  | {  0xa, 0x60 }, | 
|  | {  0xb, 0x00 }, | 
|  | {  0xc, 0x00 }, | 
|  | {  0xd, 0x00 }, | 
|  | {  0xe, 0x00 }, | 
|  | {  0xf, 0x40 }, | 
|  | { 0x10, 0x80 }, | 
|  | { 0x11, 0x77 }, | 
|  | { 0x12, 0x6a }, | 
|  | { 0x13, 0x69 }, | 
|  | { 0x14, 0x6a }, | 
|  | { 0x15, 0x69 }, | 
|  | { 0x16, 0x00 }, | 
|  | { 0x17, 0x00 }, | 
|  | { 0x18, 0x00 }, | 
|  | { 0x19, 0x00 }, | 
|  | { 0x1a, 0x00 }, | 
|  | { 0x1b, 0x00 }, | 
|  | { 0x1c, 0x00 }, | 
|  | { 0x1d, 0x00 }, | 
|  | { 0x1e, 0x00 }, | 
|  | { 0x1f, 0x00 }, | 
|  | { 0x20, 0x00 }, | 
|  | { 0x21, 0x00 }, | 
|  | { 0x22, 0x00 }, | 
|  | { 0x23, 0x00 }, | 
|  | { 0x24, 0x00 }, | 
|  | { 0x25, 0x00 }, | 
|  | { 0x26, 0x00 }, | 
|  | { 0x27, 0x2a }, | 
|  | { 0x28, 0xc0 }, | 
|  | { 0x29, 0xf3 }, | 
|  | { 0x2a, 0x33 }, | 
|  | { 0x2b, 0x00 }, | 
|  | { 0x2c, 0x0c }, | 
|  | { 0x31, 0x00 }, | 
|  | { 0x36, 0x00 }, | 
|  | { 0x37, 0x00 }, | 
|  | { 0x38, 0x00 }, | 
|  | { 0x39, 0x01 }, | 
|  | { 0x3a, 0xee }, | 
|  | { 0x3b, 0xff }, | 
|  | { 0x3c, 0x7e }, | 
|  | { 0x3d, 0xc0 }, | 
|  | { 0x3e, 0x26 }, | 
|  | { 0x3f, 0x00 }, | 
|  | { 0x48, 0x00 }, | 
|  | { 0x49, 0x00 }, | 
|  | { 0x4a, 0x00 }, | 
|  | { 0x4b, 0x04 }, | 
|  | { 0x4c, 0x00 }, | 
|  | }; | 
|  |  | 
|  | static const struct regmap_range sta350_write_regs_range[] = { | 
|  | regmap_reg_range(STA350_CONFA,  STA350_AUTO2), | 
|  | regmap_reg_range(STA350_C1CFG,  STA350_FDRC2), | 
|  | regmap_reg_range(STA350_EQCFG,  STA350_EVOLRES), | 
|  | regmap_reg_range(STA350_NSHAPE, STA350_MISC2), | 
|  | }; | 
|  |  | 
|  | static const struct regmap_range sta350_read_regs_range[] = { | 
|  | regmap_reg_range(STA350_CONFA,  STA350_AUTO2), | 
|  | regmap_reg_range(STA350_C1CFG,  STA350_STATUS), | 
|  | regmap_reg_range(STA350_EQCFG,  STA350_EVOLRES), | 
|  | regmap_reg_range(STA350_NSHAPE, STA350_MISC2), | 
|  | }; | 
|  |  | 
|  | static const struct regmap_range sta350_volatile_regs_range[] = { | 
|  | regmap_reg_range(STA350_CFADDR2, STA350_CFUD), | 
|  | regmap_reg_range(STA350_STATUS,  STA350_STATUS), | 
|  | }; | 
|  |  | 
|  | static const struct regmap_access_table sta350_write_regs = { | 
|  | .yes_ranges =	sta350_write_regs_range, | 
|  | .n_yes_ranges =	ARRAY_SIZE(sta350_write_regs_range), | 
|  | }; | 
|  |  | 
|  | static const struct regmap_access_table sta350_read_regs = { | 
|  | .yes_ranges =	sta350_read_regs_range, | 
|  | .n_yes_ranges =	ARRAY_SIZE(sta350_read_regs_range), | 
|  | }; | 
|  |  | 
|  | static const struct regmap_access_table sta350_volatile_regs = { | 
|  | .yes_ranges =	sta350_volatile_regs_range, | 
|  | .n_yes_ranges =	ARRAY_SIZE(sta350_volatile_regs_range), | 
|  | }; | 
|  |  | 
|  | /* regulator power supply names */ | 
|  | static const char * const sta350_supply_names[] = { | 
|  | "vdd-dig",	/* digital supply, 3.3V */ | 
|  | "vdd-pll",	/* pll supply, 3.3V */ | 
|  | "vcc"		/* power amp supply, 5V - 26V */ | 
|  | }; | 
|  |  | 
|  | /* codec private data */ | 
|  | struct sta350_priv { | 
|  | struct regmap *regmap; | 
|  | struct regulator_bulk_data supplies[ARRAY_SIZE(sta350_supply_names)]; | 
|  | struct sta350_platform_data *pdata; | 
|  |  | 
|  | unsigned int mclk; | 
|  | unsigned int format; | 
|  |  | 
|  | u32 coef_shadow[STA350_COEF_COUNT]; | 
|  | int shutdown; | 
|  |  | 
|  | struct gpio_desc *gpiod_nreset; | 
|  | struct gpio_desc *gpiod_power_down; | 
|  |  | 
|  | struct mutex coeff_lock; | 
|  | }; | 
|  |  | 
|  | static const DECLARE_TLV_DB_SCALE(mvol_tlv, -12750, 50, 1); | 
|  | static const DECLARE_TLV_DB_SCALE(chvol_tlv, -7950, 50, 1); | 
|  | static const DECLARE_TLV_DB_SCALE(tone_tlv, -1200, 200, 0); | 
|  |  | 
|  | static const char * const sta350_drc_ac[] = { | 
|  | "Anti-Clipping", "Dynamic Range Compression" | 
|  | }; | 
|  | static const char * const sta350_auto_gc_mode[] = { | 
|  | "User", "AC no clipping", "AC limited clipping (10%)", | 
|  | "DRC nighttime listening mode" | 
|  | }; | 
|  | static const char * const sta350_auto_xo_mode[] = { | 
|  | "User", "80Hz", "100Hz", "120Hz", "140Hz", "160Hz", "180Hz", | 
|  | "200Hz", "220Hz", "240Hz", "260Hz", "280Hz", "300Hz", "320Hz", | 
|  | "340Hz", "360Hz" | 
|  | }; | 
|  | static const char * const sta350_binary_output[] = { | 
|  | "FFX 3-state output - normal operation", "Binary output" | 
|  | }; | 
|  | static const char * const sta350_limiter_select[] = { | 
|  | "Limiter Disabled", "Limiter #1", "Limiter #2" | 
|  | }; | 
|  | static const char * const sta350_limiter_attack_rate[] = { | 
|  | "3.1584", "2.7072", "2.2560", "1.8048", "1.3536", "0.9024", | 
|  | "0.4512", "0.2256", "0.1504", "0.1123", "0.0902", "0.0752", | 
|  | "0.0645", "0.0564", "0.0501", "0.0451" | 
|  | }; | 
|  | static const char * const sta350_limiter_release_rate[] = { | 
|  | "0.5116", "0.1370", "0.0744", "0.0499", "0.0360", "0.0299", | 
|  | "0.0264", "0.0208", "0.0198", "0.0172", "0.0147", "0.0137", | 
|  | "0.0134", "0.0117", "0.0110", "0.0104" | 
|  | }; | 
|  | static const char * const sta350_noise_shaper_type[] = { | 
|  | "Third order", "Fourth order" | 
|  | }; | 
|  |  | 
|  | static DECLARE_TLV_DB_RANGE(sta350_limiter_ac_attack_tlv, | 
|  | 0, 7, TLV_DB_SCALE_ITEM(-1200, 200, 0), | 
|  | 8, 16, TLV_DB_SCALE_ITEM(300, 100, 0), | 
|  | ); | 
|  |  | 
|  | static DECLARE_TLV_DB_RANGE(sta350_limiter_ac_release_tlv, | 
|  | 0, 0, TLV_DB_SCALE_ITEM(TLV_DB_GAIN_MUTE, 0, 0), | 
|  | 1, 1, TLV_DB_SCALE_ITEM(-2900, 0, 0), | 
|  | 2, 2, TLV_DB_SCALE_ITEM(-2000, 0, 0), | 
|  | 3, 8, TLV_DB_SCALE_ITEM(-1400, 200, 0), | 
|  | 8, 16, TLV_DB_SCALE_ITEM(-700, 100, 0), | 
|  | ); | 
|  |  | 
|  | static DECLARE_TLV_DB_RANGE(sta350_limiter_drc_attack_tlv, | 
|  | 0, 7, TLV_DB_SCALE_ITEM(-3100, 200, 0), | 
|  | 8, 13, TLV_DB_SCALE_ITEM(-1600, 100, 0), | 
|  | 14, 16, TLV_DB_SCALE_ITEM(-1000, 300, 0), | 
|  | ); | 
|  |  | 
|  | static DECLARE_TLV_DB_RANGE(sta350_limiter_drc_release_tlv, | 
|  | 0, 0, TLV_DB_SCALE_ITEM(TLV_DB_GAIN_MUTE, 0, 0), | 
|  | 1, 2, TLV_DB_SCALE_ITEM(-3800, 200, 0), | 
|  | 3, 4, TLV_DB_SCALE_ITEM(-3300, 200, 0), | 
|  | 5, 12, TLV_DB_SCALE_ITEM(-3000, 200, 0), | 
|  | 13, 16, TLV_DB_SCALE_ITEM(-1500, 300, 0), | 
|  | ); | 
|  |  | 
|  | static SOC_ENUM_SINGLE_DECL(sta350_drc_ac_enum, | 
|  | STA350_CONFD, STA350_CONFD_DRC_SHIFT, | 
|  | sta350_drc_ac); | 
|  | static SOC_ENUM_SINGLE_DECL(sta350_noise_shaper_enum, | 
|  | STA350_CONFE, STA350_CONFE_NSBW_SHIFT, | 
|  | sta350_noise_shaper_type); | 
|  | static SOC_ENUM_SINGLE_DECL(sta350_auto_gc_enum, | 
|  | STA350_AUTO1, STA350_AUTO1_AMGC_SHIFT, | 
|  | sta350_auto_gc_mode); | 
|  | static SOC_ENUM_SINGLE_DECL(sta350_auto_xo_enum, | 
|  | STA350_AUTO2, STA350_AUTO2_XO_SHIFT, | 
|  | sta350_auto_xo_mode); | 
|  | static SOC_ENUM_SINGLE_DECL(sta350_binary_output_ch1_enum, | 
|  | STA350_C1CFG, STA350_CxCFG_BO_SHIFT, | 
|  | sta350_binary_output); | 
|  | static SOC_ENUM_SINGLE_DECL(sta350_binary_output_ch2_enum, | 
|  | STA350_C2CFG, STA350_CxCFG_BO_SHIFT, | 
|  | sta350_binary_output); | 
|  | static SOC_ENUM_SINGLE_DECL(sta350_binary_output_ch3_enum, | 
|  | STA350_C3CFG, STA350_CxCFG_BO_SHIFT, | 
|  | sta350_binary_output); | 
|  | static SOC_ENUM_SINGLE_DECL(sta350_limiter_ch1_enum, | 
|  | STA350_C1CFG, STA350_CxCFG_LS_SHIFT, | 
|  | sta350_limiter_select); | 
|  | static SOC_ENUM_SINGLE_DECL(sta350_limiter_ch2_enum, | 
|  | STA350_C2CFG, STA350_CxCFG_LS_SHIFT, | 
|  | sta350_limiter_select); | 
|  | static SOC_ENUM_SINGLE_DECL(sta350_limiter_ch3_enum, | 
|  | STA350_C3CFG, STA350_CxCFG_LS_SHIFT, | 
|  | sta350_limiter_select); | 
|  | static SOC_ENUM_SINGLE_DECL(sta350_limiter1_attack_rate_enum, | 
|  | STA350_L1AR, STA350_LxA_SHIFT, | 
|  | sta350_limiter_attack_rate); | 
|  | static SOC_ENUM_SINGLE_DECL(sta350_limiter2_attack_rate_enum, | 
|  | STA350_L2AR, STA350_LxA_SHIFT, | 
|  | sta350_limiter_attack_rate); | 
|  | static SOC_ENUM_SINGLE_DECL(sta350_limiter1_release_rate_enum, | 
|  | STA350_L1AR, STA350_LxR_SHIFT, | 
|  | sta350_limiter_release_rate); | 
|  | static SOC_ENUM_SINGLE_DECL(sta350_limiter2_release_rate_enum, | 
|  | STA350_L2AR, STA350_LxR_SHIFT, | 
|  | sta350_limiter_release_rate); | 
|  |  | 
|  | /* | 
|  | * byte array controls for setting biquad, mixer, scaling coefficients; | 
|  | * for biquads all five coefficients need to be set in one go, | 
|  | * mixer and pre/postscale coefs can be set individually; | 
|  | * each coef is 24bit, the bytes are ordered in the same way | 
|  | * as given in the STA350 data sheet (big endian; b1, b2, a1, a2, b0) | 
|  | */ | 
|  |  | 
|  | static int sta350_coefficient_info(struct snd_kcontrol *kcontrol, | 
|  | struct snd_ctl_elem_info *uinfo) | 
|  | { | 
|  | int numcoef = kcontrol->private_value >> 16; | 
|  | uinfo->type = SNDRV_CTL_ELEM_TYPE_BYTES; | 
|  | uinfo->count = 3 * numcoef; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int sta350_coefficient_get(struct snd_kcontrol *kcontrol, | 
|  | struct snd_ctl_elem_value *ucontrol) | 
|  | { | 
|  | struct snd_soc_component *component = snd_soc_kcontrol_component(kcontrol); | 
|  | struct sta350_priv *sta350 = snd_soc_component_get_drvdata(component); | 
|  | int numcoef = kcontrol->private_value >> 16; | 
|  | int index = kcontrol->private_value & 0xffff; | 
|  | unsigned int cfud, val; | 
|  | int i, ret = 0; | 
|  |  | 
|  | mutex_lock(&sta350->coeff_lock); | 
|  |  | 
|  | /* preserve reserved bits in STA350_CFUD */ | 
|  | regmap_read(sta350->regmap, STA350_CFUD, &cfud); | 
|  | cfud &= 0xf0; | 
|  | /* | 
|  | * chip documentation does not say if the bits are self clearing, | 
|  | * so do it explicitly | 
|  | */ | 
|  | regmap_write(sta350->regmap, STA350_CFUD, cfud); | 
|  |  | 
|  | regmap_write(sta350->regmap, STA350_CFADDR2, index); | 
|  | if (numcoef == 1) { | 
|  | regmap_write(sta350->regmap, STA350_CFUD, cfud | 0x04); | 
|  | } else if (numcoef == 5) { | 
|  | regmap_write(sta350->regmap, STA350_CFUD, cfud | 0x08); | 
|  | } else { | 
|  | ret = -EINVAL; | 
|  | goto exit_unlock; | 
|  | } | 
|  |  | 
|  | for (i = 0; i < 3 * numcoef; i++) { | 
|  | regmap_read(sta350->regmap, STA350_B1CF1 + i, &val); | 
|  | ucontrol->value.bytes.data[i] = val; | 
|  | } | 
|  |  | 
|  | exit_unlock: | 
|  | mutex_unlock(&sta350->coeff_lock); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int sta350_coefficient_put(struct snd_kcontrol *kcontrol, | 
|  | struct snd_ctl_elem_value *ucontrol) | 
|  | { | 
|  | struct snd_soc_component *component = snd_soc_kcontrol_component(kcontrol); | 
|  | struct sta350_priv *sta350 = snd_soc_component_get_drvdata(component); | 
|  | int numcoef = kcontrol->private_value >> 16; | 
|  | int index = kcontrol->private_value & 0xffff; | 
|  | unsigned int cfud; | 
|  | int i; | 
|  |  | 
|  | /* preserve reserved bits in STA350_CFUD */ | 
|  | regmap_read(sta350->regmap, STA350_CFUD, &cfud); | 
|  | cfud &= 0xf0; | 
|  | /* | 
|  | * chip documentation does not say if the bits are self clearing, | 
|  | * so do it explicitly | 
|  | */ | 
|  | regmap_write(sta350->regmap, STA350_CFUD, cfud); | 
|  |  | 
|  | regmap_write(sta350->regmap, STA350_CFADDR2, index); | 
|  | for (i = 0; i < numcoef && (index + i < STA350_COEF_COUNT); i++) | 
|  | sta350->coef_shadow[index + i] = | 
|  | (ucontrol->value.bytes.data[3 * i] << 16) | 
|  | | (ucontrol->value.bytes.data[3 * i + 1] << 8) | 
|  | | (ucontrol->value.bytes.data[3 * i + 2]); | 
|  | for (i = 0; i < 3 * numcoef; i++) | 
|  | regmap_write(sta350->regmap, STA350_B1CF1 + i, | 
|  | ucontrol->value.bytes.data[i]); | 
|  | if (numcoef == 1) | 
|  | regmap_write(sta350->regmap, STA350_CFUD, cfud | 0x01); | 
|  | else if (numcoef == 5) | 
|  | regmap_write(sta350->regmap, STA350_CFUD, cfud | 0x02); | 
|  | else | 
|  | return -EINVAL; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int sta350_sync_coef_shadow(struct snd_soc_component *component) | 
|  | { | 
|  | struct sta350_priv *sta350 = snd_soc_component_get_drvdata(component); | 
|  | unsigned int cfud; | 
|  | int i; | 
|  |  | 
|  | /* preserve reserved bits in STA350_CFUD */ | 
|  | regmap_read(sta350->regmap, STA350_CFUD, &cfud); | 
|  | cfud &= 0xf0; | 
|  |  | 
|  | for (i = 0; i < STA350_COEF_COUNT; i++) { | 
|  | regmap_write(sta350->regmap, STA350_CFADDR2, i); | 
|  | regmap_write(sta350->regmap, STA350_B1CF1, | 
|  | (sta350->coef_shadow[i] >> 16) & 0xff); | 
|  | regmap_write(sta350->regmap, STA350_B1CF2, | 
|  | (sta350->coef_shadow[i] >> 8) & 0xff); | 
|  | regmap_write(sta350->regmap, STA350_B1CF3, | 
|  | (sta350->coef_shadow[i]) & 0xff); | 
|  | /* | 
|  | * chip documentation does not say if the bits are | 
|  | * self-clearing, so do it explicitly | 
|  | */ | 
|  | regmap_write(sta350->regmap, STA350_CFUD, cfud); | 
|  | regmap_write(sta350->regmap, STA350_CFUD, cfud | 0x01); | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int sta350_cache_sync(struct snd_soc_component *component) | 
|  | { | 
|  | struct sta350_priv *sta350 = snd_soc_component_get_drvdata(component); | 
|  | unsigned int mute; | 
|  | int rc; | 
|  |  | 
|  | /* mute during register sync */ | 
|  | regmap_read(sta350->regmap, STA350_CFUD, &mute); | 
|  | regmap_write(sta350->regmap, STA350_MMUTE, mute | STA350_MMUTE_MMUTE); | 
|  | sta350_sync_coef_shadow(component); | 
|  | rc = regcache_sync(sta350->regmap); | 
|  | regmap_write(sta350->regmap, STA350_MMUTE, mute); | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | #define SINGLE_COEF(xname, index) \ | 
|  | {	.iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \ | 
|  | .info = sta350_coefficient_info, \ | 
|  | .get = sta350_coefficient_get,\ | 
|  | .put = sta350_coefficient_put, \ | 
|  | .private_value = index | (1 << 16) } | 
|  |  | 
|  | #define BIQUAD_COEFS(xname, index) \ | 
|  | {	.iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \ | 
|  | .info = sta350_coefficient_info, \ | 
|  | .get = sta350_coefficient_get,\ | 
|  | .put = sta350_coefficient_put, \ | 
|  | .private_value = index | (5 << 16) } | 
|  |  | 
|  | static const struct snd_kcontrol_new sta350_snd_controls[] = { | 
|  | SOC_SINGLE_TLV("Master Volume", STA350_MVOL, 0, 0xff, 1, mvol_tlv), | 
|  | /* VOL */ | 
|  | SOC_SINGLE_TLV("Ch1 Volume", STA350_C1VOL, 0, 0xff, 1, chvol_tlv), | 
|  | SOC_SINGLE_TLV("Ch2 Volume", STA350_C2VOL, 0, 0xff, 1, chvol_tlv), | 
|  | SOC_SINGLE_TLV("Ch3 Volume", STA350_C3VOL, 0, 0xff, 1, chvol_tlv), | 
|  | /* CONFD */ | 
|  | SOC_SINGLE("High Pass Filter Bypass Switch", | 
|  | STA350_CONFD, STA350_CONFD_HPB_SHIFT, 1, 1), | 
|  | SOC_SINGLE("De-emphasis Filter Switch", | 
|  | STA350_CONFD, STA350_CONFD_DEMP_SHIFT, 1, 0), | 
|  | SOC_SINGLE("DSP Bypass Switch", | 
|  | STA350_CONFD, STA350_CONFD_DSPB_SHIFT, 1, 0), | 
|  | SOC_SINGLE("Post-scale Link Switch", | 
|  | STA350_CONFD, STA350_CONFD_PSL_SHIFT, 1, 0), | 
|  | SOC_SINGLE("Biquad Coefficient Link Switch", | 
|  | STA350_CONFD, STA350_CONFD_BQL_SHIFT, 1, 0), | 
|  | SOC_ENUM("Compressor/Limiter Switch", sta350_drc_ac_enum), | 
|  | SOC_ENUM("Noise Shaper Bandwidth", sta350_noise_shaper_enum), | 
|  | SOC_SINGLE("Zero-detect Mute Enable Switch", | 
|  | STA350_CONFD, STA350_CONFD_ZDE_SHIFT, 1, 0), | 
|  | SOC_SINGLE("Submix Mode Switch", | 
|  | STA350_CONFD, STA350_CONFD_SME_SHIFT, 1, 0), | 
|  | /* CONFE */ | 
|  | SOC_SINGLE("Zero Cross Switch", STA350_CONFE, STA350_CONFE_ZCE_SHIFT, 1, 0), | 
|  | SOC_SINGLE("Soft Ramp Switch", STA350_CONFE, STA350_CONFE_SVE_SHIFT, 1, 0), | 
|  | /* MUTE */ | 
|  | SOC_SINGLE("Master Switch", STA350_MMUTE, STA350_MMUTE_MMUTE_SHIFT, 1, 1), | 
|  | SOC_SINGLE("Ch1 Switch", STA350_MMUTE, STA350_MMUTE_C1M_SHIFT, 1, 1), | 
|  | SOC_SINGLE("Ch2 Switch", STA350_MMUTE, STA350_MMUTE_C2M_SHIFT, 1, 1), | 
|  | SOC_SINGLE("Ch3 Switch", STA350_MMUTE, STA350_MMUTE_C3M_SHIFT, 1, 1), | 
|  | /* AUTOx */ | 
|  | SOC_ENUM("Automode GC", sta350_auto_gc_enum), | 
|  | SOC_ENUM("Automode XO", sta350_auto_xo_enum), | 
|  | /* CxCFG */ | 
|  | SOC_SINGLE("Ch1 Tone Control Bypass Switch", | 
|  | STA350_C1CFG, STA350_CxCFG_TCB_SHIFT, 1, 0), | 
|  | SOC_SINGLE("Ch2 Tone Control Bypass Switch", | 
|  | STA350_C2CFG, STA350_CxCFG_TCB_SHIFT, 1, 0), | 
|  | SOC_SINGLE("Ch1 EQ Bypass Switch", | 
|  | STA350_C1CFG, STA350_CxCFG_EQBP_SHIFT, 1, 0), | 
|  | SOC_SINGLE("Ch2 EQ Bypass Switch", | 
|  | STA350_C2CFG, STA350_CxCFG_EQBP_SHIFT, 1, 0), | 
|  | SOC_SINGLE("Ch1 Master Volume Bypass Switch", | 
|  | STA350_C1CFG, STA350_CxCFG_VBP_SHIFT, 1, 0), | 
|  | SOC_SINGLE("Ch2 Master Volume Bypass Switch", | 
|  | STA350_C1CFG, STA350_CxCFG_VBP_SHIFT, 1, 0), | 
|  | SOC_SINGLE("Ch3 Master Volume Bypass Switch", | 
|  | STA350_C1CFG, STA350_CxCFG_VBP_SHIFT, 1, 0), | 
|  | SOC_ENUM("Ch1 Binary Output Select", sta350_binary_output_ch1_enum), | 
|  | SOC_ENUM("Ch2 Binary Output Select", sta350_binary_output_ch2_enum), | 
|  | SOC_ENUM("Ch3 Binary Output Select", sta350_binary_output_ch3_enum), | 
|  | SOC_ENUM("Ch1 Limiter Select", sta350_limiter_ch1_enum), | 
|  | SOC_ENUM("Ch2 Limiter Select", sta350_limiter_ch2_enum), | 
|  | SOC_ENUM("Ch3 Limiter Select", sta350_limiter_ch3_enum), | 
|  | /* TONE */ | 
|  | SOC_SINGLE_RANGE_TLV("Bass Tone Control Volume", | 
|  | STA350_TONE, STA350_TONE_BTC_SHIFT, 1, 13, 0, tone_tlv), | 
|  | SOC_SINGLE_RANGE_TLV("Treble Tone Control Volume", | 
|  | STA350_TONE, STA350_TONE_TTC_SHIFT, 1, 13, 0, tone_tlv), | 
|  | SOC_ENUM("Limiter1 Attack Rate (dB/ms)", sta350_limiter1_attack_rate_enum), | 
|  | SOC_ENUM("Limiter2 Attack Rate (dB/ms)", sta350_limiter2_attack_rate_enum), | 
|  | SOC_ENUM("Limiter1 Release Rate (dB/ms)", sta350_limiter1_release_rate_enum), | 
|  | SOC_ENUM("Limiter2 Release Rate (dB/ms)", sta350_limiter2_release_rate_enum), | 
|  |  | 
|  | /* | 
|  | * depending on mode, the attack/release thresholds have | 
|  | * two different enum definitions; provide both | 
|  | */ | 
|  | SOC_SINGLE_TLV("Limiter1 Attack Threshold (AC Mode)", | 
|  | STA350_L1ATRT, STA350_LxA_SHIFT, | 
|  | 16, 0, sta350_limiter_ac_attack_tlv), | 
|  | SOC_SINGLE_TLV("Limiter2 Attack Threshold (AC Mode)", | 
|  | STA350_L2ATRT, STA350_LxA_SHIFT, | 
|  | 16, 0, sta350_limiter_ac_attack_tlv), | 
|  | SOC_SINGLE_TLV("Limiter1 Release Threshold (AC Mode)", | 
|  | STA350_L1ATRT, STA350_LxR_SHIFT, | 
|  | 16, 0, sta350_limiter_ac_release_tlv), | 
|  | SOC_SINGLE_TLV("Limiter2 Release Threshold (AC Mode)", | 
|  | STA350_L2ATRT, STA350_LxR_SHIFT, | 
|  | 16, 0, sta350_limiter_ac_release_tlv), | 
|  | SOC_SINGLE_TLV("Limiter1 Attack Threshold (DRC Mode)", | 
|  | STA350_L1ATRT, STA350_LxA_SHIFT, | 
|  | 16, 0, sta350_limiter_drc_attack_tlv), | 
|  | SOC_SINGLE_TLV("Limiter2 Attack Threshold (DRC Mode)", | 
|  | STA350_L2ATRT, STA350_LxA_SHIFT, | 
|  | 16, 0, sta350_limiter_drc_attack_tlv), | 
|  | SOC_SINGLE_TLV("Limiter1 Release Threshold (DRC Mode)", | 
|  | STA350_L1ATRT, STA350_LxR_SHIFT, | 
|  | 16, 0, sta350_limiter_drc_release_tlv), | 
|  | SOC_SINGLE_TLV("Limiter2 Release Threshold (DRC Mode)", | 
|  | STA350_L2ATRT, STA350_LxR_SHIFT, | 
|  | 16, 0, sta350_limiter_drc_release_tlv), | 
|  |  | 
|  | BIQUAD_COEFS("Ch1 - Biquad 1", 0), | 
|  | BIQUAD_COEFS("Ch1 - Biquad 2", 5), | 
|  | BIQUAD_COEFS("Ch1 - Biquad 3", 10), | 
|  | BIQUAD_COEFS("Ch1 - Biquad 4", 15), | 
|  | BIQUAD_COEFS("Ch2 - Biquad 1", 20), | 
|  | BIQUAD_COEFS("Ch2 - Biquad 2", 25), | 
|  | BIQUAD_COEFS("Ch2 - Biquad 3", 30), | 
|  | BIQUAD_COEFS("Ch2 - Biquad 4", 35), | 
|  | BIQUAD_COEFS("High-pass", 40), | 
|  | BIQUAD_COEFS("Low-pass", 45), | 
|  | SINGLE_COEF("Ch1 - Prescale", 50), | 
|  | SINGLE_COEF("Ch2 - Prescale", 51), | 
|  | SINGLE_COEF("Ch1 - Postscale", 52), | 
|  | SINGLE_COEF("Ch2 - Postscale", 53), | 
|  | SINGLE_COEF("Ch3 - Postscale", 54), | 
|  | SINGLE_COEF("Thermal warning - Postscale", 55), | 
|  | SINGLE_COEF("Ch1 - Mix 1", 56), | 
|  | SINGLE_COEF("Ch1 - Mix 2", 57), | 
|  | SINGLE_COEF("Ch2 - Mix 1", 58), | 
|  | SINGLE_COEF("Ch2 - Mix 2", 59), | 
|  | SINGLE_COEF("Ch3 - Mix 1", 60), | 
|  | SINGLE_COEF("Ch3 - Mix 2", 61), | 
|  | }; | 
|  |  | 
|  | static const struct snd_soc_dapm_widget sta350_dapm_widgets[] = { | 
|  | SND_SOC_DAPM_DAC("DAC", NULL, SND_SOC_NOPM, 0, 0), | 
|  | SND_SOC_DAPM_OUTPUT("LEFT"), | 
|  | SND_SOC_DAPM_OUTPUT("RIGHT"), | 
|  | SND_SOC_DAPM_OUTPUT("SUB"), | 
|  | }; | 
|  |  | 
|  | static const struct snd_soc_dapm_route sta350_dapm_routes[] = { | 
|  | { "LEFT", NULL, "DAC" }, | 
|  | { "RIGHT", NULL, "DAC" }, | 
|  | { "SUB", NULL, "DAC" }, | 
|  | { "DAC", NULL, "Playback" }, | 
|  | }; | 
|  |  | 
|  | /* MCLK interpolation ratio per fs */ | 
|  | static struct { | 
|  | int fs; | 
|  | int ir; | 
|  | } interpolation_ratios[] = { | 
|  | { 32000, 0 }, | 
|  | { 44100, 0 }, | 
|  | { 48000, 0 }, | 
|  | { 88200, 1 }, | 
|  | { 96000, 1 }, | 
|  | { 176400, 2 }, | 
|  | { 192000, 2 }, | 
|  | }; | 
|  |  | 
|  | /* MCLK to fs clock ratios */ | 
|  | static int mcs_ratio_table[3][6] = { | 
|  | { 768, 512, 384, 256, 128, 576 }, | 
|  | { 384, 256, 192, 128,  64,   0 }, | 
|  | { 192, 128,  96,  64,  32,   0 }, | 
|  | }; | 
|  |  | 
|  | /** | 
|  | * sta350_set_dai_sysclk - configure MCLK | 
|  | * @codec_dai: the codec DAI | 
|  | * @clk_id: the clock ID (ignored) | 
|  | * @freq: the MCLK input frequency | 
|  | * @dir: the clock direction (ignored) | 
|  | * | 
|  | * The value of MCLK is used to determine which sample rates are supported | 
|  | * by the STA350, based on the mcs_ratio_table. | 
|  | * | 
|  | * This function must be called by the machine driver's 'startup' function, | 
|  | * otherwise the list of supported sample rates will not be available in | 
|  | * time for ALSA. | 
|  | */ | 
|  | static int sta350_set_dai_sysclk(struct snd_soc_dai *codec_dai, | 
|  | int clk_id, unsigned int freq, int dir) | 
|  | { | 
|  | struct snd_soc_component *component = codec_dai->component; | 
|  | struct sta350_priv *sta350 = snd_soc_component_get_drvdata(component); | 
|  |  | 
|  | dev_dbg(component->dev, "mclk=%u\n", freq); | 
|  | sta350->mclk = freq; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * sta350_set_dai_fmt - configure the codec for the selected audio format | 
|  | * @codec_dai: the codec DAI | 
|  | * @fmt: a SND_SOC_DAIFMT_x value indicating the data format | 
|  | * | 
|  | * This function takes a bitmask of SND_SOC_DAIFMT_x bits and programs the | 
|  | * codec accordingly. | 
|  | */ | 
|  | static int sta350_set_dai_fmt(struct snd_soc_dai *codec_dai, | 
|  | unsigned int fmt) | 
|  | { | 
|  | struct snd_soc_component *component = codec_dai->component; | 
|  | struct sta350_priv *sta350 = snd_soc_component_get_drvdata(component); | 
|  | unsigned int confb = 0; | 
|  |  | 
|  | switch (fmt & SND_SOC_DAIFMT_CLOCK_PROVIDER_MASK) { | 
|  | case SND_SOC_DAIFMT_CBC_CFC: | 
|  | break; | 
|  | default: | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { | 
|  | case SND_SOC_DAIFMT_I2S: | 
|  | case SND_SOC_DAIFMT_RIGHT_J: | 
|  | case SND_SOC_DAIFMT_LEFT_J: | 
|  | sta350->format = fmt & SND_SOC_DAIFMT_FORMAT_MASK; | 
|  | break; | 
|  | default: | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | switch (fmt & SND_SOC_DAIFMT_INV_MASK) { | 
|  | case SND_SOC_DAIFMT_NB_NF: | 
|  | confb |= STA350_CONFB_C2IM; | 
|  | break; | 
|  | case SND_SOC_DAIFMT_NB_IF: | 
|  | confb |= STA350_CONFB_C1IM; | 
|  | break; | 
|  | default: | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | return regmap_update_bits(sta350->regmap, STA350_CONFB, | 
|  | STA350_CONFB_C1IM | STA350_CONFB_C2IM, confb); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * sta350_hw_params - program the STA350 with the given hardware parameters. | 
|  | * @substream: the audio stream | 
|  | * @params: the hardware parameters to set | 
|  | * @dai: the SOC DAI (ignored) | 
|  | * | 
|  | * This function programs the hardware with the values provided. | 
|  | * Specifically, the sample rate and the data format. | 
|  | */ | 
|  | static int sta350_hw_params(struct snd_pcm_substream *substream, | 
|  | struct snd_pcm_hw_params *params, | 
|  | struct snd_soc_dai *dai) | 
|  | { | 
|  | struct snd_soc_component *component = dai->component; | 
|  | struct sta350_priv *sta350 = snd_soc_component_get_drvdata(component); | 
|  | int i, mcs = -EINVAL, ir = -EINVAL; | 
|  | unsigned int confa, confb; | 
|  | unsigned int rate, ratio; | 
|  | int ret; | 
|  |  | 
|  | if (!sta350->mclk) { | 
|  | dev_err(component->dev, | 
|  | "sta350->mclk is unset. Unable to determine ratio\n"); | 
|  | return -EIO; | 
|  | } | 
|  |  | 
|  | rate = params_rate(params); | 
|  | ratio = sta350->mclk / rate; | 
|  | dev_dbg(component->dev, "rate: %u, ratio: %u\n", rate, ratio); | 
|  |  | 
|  | for (i = 0; i < ARRAY_SIZE(interpolation_ratios); i++) { | 
|  | if (interpolation_ratios[i].fs == rate) { | 
|  | ir = interpolation_ratios[i].ir; | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (ir < 0) { | 
|  | dev_err(component->dev, "Unsupported samplerate: %u\n", rate); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | for (i = 0; i < 6; i++) { | 
|  | if (mcs_ratio_table[ir][i] == ratio) { | 
|  | mcs = i; | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (mcs < 0) { | 
|  | dev_err(component->dev, "Unresolvable ratio: %u\n", ratio); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | confa = (ir << STA350_CONFA_IR_SHIFT) | | 
|  | (mcs << STA350_CONFA_MCS_SHIFT); | 
|  | confb = 0; | 
|  |  | 
|  | switch (params_width(params)) { | 
|  | case 24: | 
|  | dev_dbg(component->dev, "24bit\n"); | 
|  | fallthrough; | 
|  | case 32: | 
|  | dev_dbg(component->dev, "24bit or 32bit\n"); | 
|  | switch (sta350->format) { | 
|  | case SND_SOC_DAIFMT_I2S: | 
|  | confb |= 0x0; | 
|  | break; | 
|  | case SND_SOC_DAIFMT_LEFT_J: | 
|  | confb |= 0x1; | 
|  | break; | 
|  | case SND_SOC_DAIFMT_RIGHT_J: | 
|  | confb |= 0x2; | 
|  | break; | 
|  | } | 
|  |  | 
|  | break; | 
|  | case 20: | 
|  | dev_dbg(component->dev, "20bit\n"); | 
|  | switch (sta350->format) { | 
|  | case SND_SOC_DAIFMT_I2S: | 
|  | confb |= 0x4; | 
|  | break; | 
|  | case SND_SOC_DAIFMT_LEFT_J: | 
|  | confb |= 0x5; | 
|  | break; | 
|  | case SND_SOC_DAIFMT_RIGHT_J: | 
|  | confb |= 0x6; | 
|  | break; | 
|  | } | 
|  |  | 
|  | break; | 
|  | case 18: | 
|  | dev_dbg(component->dev, "18bit\n"); | 
|  | switch (sta350->format) { | 
|  | case SND_SOC_DAIFMT_I2S: | 
|  | confb |= 0x8; | 
|  | break; | 
|  | case SND_SOC_DAIFMT_LEFT_J: | 
|  | confb |= 0x9; | 
|  | break; | 
|  | case SND_SOC_DAIFMT_RIGHT_J: | 
|  | confb |= 0xa; | 
|  | break; | 
|  | } | 
|  |  | 
|  | break; | 
|  | case 16: | 
|  | dev_dbg(component->dev, "16bit\n"); | 
|  | switch (sta350->format) { | 
|  | case SND_SOC_DAIFMT_I2S: | 
|  | confb |= 0x0; | 
|  | break; | 
|  | case SND_SOC_DAIFMT_LEFT_J: | 
|  | confb |= 0xd; | 
|  | break; | 
|  | case SND_SOC_DAIFMT_RIGHT_J: | 
|  | confb |= 0xe; | 
|  | break; | 
|  | } | 
|  |  | 
|  | break; | 
|  | default: | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | ret = regmap_update_bits(sta350->regmap, STA350_CONFA, | 
|  | STA350_CONFA_MCS_MASK | STA350_CONFA_IR_MASK, | 
|  | confa); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  |  | 
|  | ret = regmap_update_bits(sta350->regmap, STA350_CONFB, | 
|  | STA350_CONFB_SAI_MASK | STA350_CONFB_SAIFB, | 
|  | confb); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int sta350_startup_sequence(struct sta350_priv *sta350) | 
|  | { | 
|  | if (sta350->gpiod_power_down) | 
|  | gpiod_set_value(sta350->gpiod_power_down, 1); | 
|  |  | 
|  | if (sta350->gpiod_nreset) { | 
|  | gpiod_set_value(sta350->gpiod_nreset, 0); | 
|  | mdelay(1); | 
|  | gpiod_set_value(sta350->gpiod_nreset, 1); | 
|  | mdelay(1); | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * sta350_set_bias_level - DAPM callback | 
|  | * @component: the component device | 
|  | * @level: DAPM power level | 
|  | * | 
|  | * This is called by ALSA to put the component into low power mode | 
|  | * or to wake it up.  If the component is powered off completely | 
|  | * all registers must be restored after power on. | 
|  | */ | 
|  | static int sta350_set_bias_level(struct snd_soc_component *component, | 
|  | enum snd_soc_bias_level level) | 
|  | { | 
|  | struct sta350_priv *sta350 = snd_soc_component_get_drvdata(component); | 
|  | int ret; | 
|  |  | 
|  | dev_dbg(component->dev, "level = %d\n", level); | 
|  | switch (level) { | 
|  | case SND_SOC_BIAS_ON: | 
|  | break; | 
|  |  | 
|  | case SND_SOC_BIAS_PREPARE: | 
|  | /* Full power on */ | 
|  | regmap_update_bits(sta350->regmap, STA350_CONFF, | 
|  | STA350_CONFF_PWDN | STA350_CONFF_EAPD, | 
|  | STA350_CONFF_PWDN | STA350_CONFF_EAPD); | 
|  | break; | 
|  |  | 
|  | case SND_SOC_BIAS_STANDBY: | 
|  | if (snd_soc_component_get_bias_level(component) == SND_SOC_BIAS_OFF) { | 
|  | ret = regulator_bulk_enable( | 
|  | ARRAY_SIZE(sta350->supplies), | 
|  | sta350->supplies); | 
|  | if (ret < 0) { | 
|  | dev_err(component->dev, | 
|  | "Failed to enable supplies: %d\n", | 
|  | ret); | 
|  | return ret; | 
|  | } | 
|  | sta350_startup_sequence(sta350); | 
|  | sta350_cache_sync(component); | 
|  | } | 
|  |  | 
|  | /* Power down */ | 
|  | regmap_update_bits(sta350->regmap, STA350_CONFF, | 
|  | STA350_CONFF_PWDN | STA350_CONFF_EAPD, | 
|  | 0); | 
|  |  | 
|  | break; | 
|  |  | 
|  | case SND_SOC_BIAS_OFF: | 
|  | /* The chip runs through the power down sequence for us */ | 
|  | regmap_update_bits(sta350->regmap, STA350_CONFF, | 
|  | STA350_CONFF_PWDN | STA350_CONFF_EAPD, 0); | 
|  |  | 
|  | /* power down: low */ | 
|  | if (sta350->gpiod_power_down) | 
|  | gpiod_set_value(sta350->gpiod_power_down, 0); | 
|  |  | 
|  | if (sta350->gpiod_nreset) | 
|  | gpiod_set_value(sta350->gpiod_nreset, 0); | 
|  |  | 
|  | regulator_bulk_disable(ARRAY_SIZE(sta350->supplies), | 
|  | sta350->supplies); | 
|  | break; | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static const struct snd_soc_dai_ops sta350_dai_ops = { | 
|  | .hw_params	= sta350_hw_params, | 
|  | .set_sysclk	= sta350_set_dai_sysclk, | 
|  | .set_fmt	= sta350_set_dai_fmt, | 
|  | }; | 
|  |  | 
|  | static struct snd_soc_dai_driver sta350_dai = { | 
|  | .name = "sta350-hifi", | 
|  | .playback = { | 
|  | .stream_name = "Playback", | 
|  | .channels_min = 2, | 
|  | .channels_max = 2, | 
|  | .rates = STA350_RATES, | 
|  | .formats = STA350_FORMATS, | 
|  | }, | 
|  | .ops = &sta350_dai_ops, | 
|  | }; | 
|  |  | 
|  | static int sta350_probe(struct snd_soc_component *component) | 
|  | { | 
|  | struct sta350_priv *sta350 = snd_soc_component_get_drvdata(component); | 
|  | struct sta350_platform_data *pdata = sta350->pdata; | 
|  | int i, ret = 0, thermal = 0; | 
|  |  | 
|  | ret = regulator_bulk_enable(ARRAY_SIZE(sta350->supplies), | 
|  | sta350->supplies); | 
|  | if (ret < 0) { | 
|  | dev_err(component->dev, "Failed to enable supplies: %d\n", ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | ret = sta350_startup_sequence(sta350); | 
|  | if (ret < 0) { | 
|  | dev_err(component->dev, "Failed to startup device\n"); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* CONFA */ | 
|  | if (!pdata->thermal_warning_recovery) | 
|  | thermal |= STA350_CONFA_TWAB; | 
|  | if (!pdata->thermal_warning_adjustment) | 
|  | thermal |= STA350_CONFA_TWRB; | 
|  | if (!pdata->fault_detect_recovery) | 
|  | thermal |= STA350_CONFA_FDRB; | 
|  | regmap_update_bits(sta350->regmap, STA350_CONFA, | 
|  | STA350_CONFA_TWAB | STA350_CONFA_TWRB | | 
|  | STA350_CONFA_FDRB, | 
|  | thermal); | 
|  |  | 
|  | /* CONFC */ | 
|  | regmap_update_bits(sta350->regmap, STA350_CONFC, | 
|  | STA350_CONFC_OM_MASK, | 
|  | pdata->ffx_power_output_mode | 
|  | << STA350_CONFC_OM_SHIFT); | 
|  | regmap_update_bits(sta350->regmap, STA350_CONFC, | 
|  | STA350_CONFC_CSZ_MASK, | 
|  | pdata->drop_compensation_ns | 
|  | << STA350_CONFC_CSZ_SHIFT); | 
|  | regmap_update_bits(sta350->regmap, | 
|  | STA350_CONFC, | 
|  | STA350_CONFC_OCRB, | 
|  | pdata->oc_warning_adjustment ? | 
|  | STA350_CONFC_OCRB : 0); | 
|  |  | 
|  | /* CONFE */ | 
|  | regmap_update_bits(sta350->regmap, STA350_CONFE, | 
|  | STA350_CONFE_MPCV, | 
|  | pdata->max_power_use_mpcc ? | 
|  | STA350_CONFE_MPCV : 0); | 
|  | regmap_update_bits(sta350->regmap, STA350_CONFE, | 
|  | STA350_CONFE_MPC, | 
|  | pdata->max_power_correction ? | 
|  | STA350_CONFE_MPC : 0); | 
|  | regmap_update_bits(sta350->regmap, STA350_CONFE, | 
|  | STA350_CONFE_AME, | 
|  | pdata->am_reduction_mode ? | 
|  | STA350_CONFE_AME : 0); | 
|  | regmap_update_bits(sta350->regmap, STA350_CONFE, | 
|  | STA350_CONFE_PWMS, | 
|  | pdata->odd_pwm_speed_mode ? | 
|  | STA350_CONFE_PWMS : 0); | 
|  | regmap_update_bits(sta350->regmap, STA350_CONFE, | 
|  | STA350_CONFE_DCCV, | 
|  | pdata->distortion_compensation ? | 
|  | STA350_CONFE_DCCV : 0); | 
|  | /*  CONFF */ | 
|  | regmap_update_bits(sta350->regmap, STA350_CONFF, | 
|  | STA350_CONFF_IDE, | 
|  | pdata->invalid_input_detect_mute ? | 
|  | STA350_CONFF_IDE : 0); | 
|  | regmap_update_bits(sta350->regmap, STA350_CONFF, | 
|  | STA350_CONFF_OCFG_MASK, | 
|  | pdata->output_conf | 
|  | << STA350_CONFF_OCFG_SHIFT); | 
|  |  | 
|  | /* channel to output mapping */ | 
|  | regmap_update_bits(sta350->regmap, STA350_C1CFG, | 
|  | STA350_CxCFG_OM_MASK, | 
|  | pdata->ch1_output_mapping | 
|  | << STA350_CxCFG_OM_SHIFT); | 
|  | regmap_update_bits(sta350->regmap, STA350_C2CFG, | 
|  | STA350_CxCFG_OM_MASK, | 
|  | pdata->ch2_output_mapping | 
|  | << STA350_CxCFG_OM_SHIFT); | 
|  | regmap_update_bits(sta350->regmap, STA350_C3CFG, | 
|  | STA350_CxCFG_OM_MASK, | 
|  | pdata->ch3_output_mapping | 
|  | << STA350_CxCFG_OM_SHIFT); | 
|  |  | 
|  | /* miscellaneous registers */ | 
|  | regmap_update_bits(sta350->regmap, STA350_MISC1, | 
|  | STA350_MISC1_CPWMEN, | 
|  | pdata->activate_mute_output ? | 
|  | STA350_MISC1_CPWMEN : 0); | 
|  | regmap_update_bits(sta350->regmap, STA350_MISC1, | 
|  | STA350_MISC1_BRIDGOFF, | 
|  | pdata->bridge_immediate_off ? | 
|  | STA350_MISC1_BRIDGOFF : 0); | 
|  | regmap_update_bits(sta350->regmap, STA350_MISC1, | 
|  | STA350_MISC1_NSHHPEN, | 
|  | pdata->noise_shape_dc_cut ? | 
|  | STA350_MISC1_NSHHPEN : 0); | 
|  | regmap_update_bits(sta350->regmap, STA350_MISC1, | 
|  | STA350_MISC1_RPDNEN, | 
|  | pdata->powerdown_master_vol ? | 
|  | STA350_MISC1_RPDNEN: 0); | 
|  |  | 
|  | regmap_update_bits(sta350->regmap, STA350_MISC2, | 
|  | STA350_MISC2_PNDLSL_MASK, | 
|  | pdata->powerdown_delay_divider | 
|  | << STA350_MISC2_PNDLSL_SHIFT); | 
|  |  | 
|  | /* initialize coefficient shadow RAM with reset values */ | 
|  | for (i = 4; i <= 49; i += 5) | 
|  | sta350->coef_shadow[i] = 0x400000; | 
|  | for (i = 50; i <= 54; i++) | 
|  | sta350->coef_shadow[i] = 0x7fffff; | 
|  | sta350->coef_shadow[55] = 0x5a9df7; | 
|  | sta350->coef_shadow[56] = 0x7fffff; | 
|  | sta350->coef_shadow[59] = 0x7fffff; | 
|  | sta350->coef_shadow[60] = 0x400000; | 
|  | sta350->coef_shadow[61] = 0x400000; | 
|  |  | 
|  | snd_soc_component_force_bias_level(component, SND_SOC_BIAS_STANDBY); | 
|  | /* Bias level configuration will have done an extra enable */ | 
|  | regulator_bulk_disable(ARRAY_SIZE(sta350->supplies), sta350->supplies); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void sta350_remove(struct snd_soc_component *component) | 
|  | { | 
|  | struct sta350_priv *sta350 = snd_soc_component_get_drvdata(component); | 
|  |  | 
|  | regulator_bulk_disable(ARRAY_SIZE(sta350->supplies), sta350->supplies); | 
|  | } | 
|  |  | 
|  | static const struct snd_soc_component_driver sta350_component = { | 
|  | .probe			= sta350_probe, | 
|  | .remove			= sta350_remove, | 
|  | .set_bias_level		= sta350_set_bias_level, | 
|  | .controls		= sta350_snd_controls, | 
|  | .num_controls		= ARRAY_SIZE(sta350_snd_controls), | 
|  | .dapm_widgets		= sta350_dapm_widgets, | 
|  | .num_dapm_widgets	= ARRAY_SIZE(sta350_dapm_widgets), | 
|  | .dapm_routes		= sta350_dapm_routes, | 
|  | .num_dapm_routes	= ARRAY_SIZE(sta350_dapm_routes), | 
|  | .suspend_bias_off	= 1, | 
|  | .idle_bias_on		= 1, | 
|  | .use_pmdown_time	= 1, | 
|  | .endianness		= 1, | 
|  | }; | 
|  |  | 
|  | static const struct regmap_config sta350_regmap = { | 
|  | .reg_bits =		8, | 
|  | .val_bits =		8, | 
|  | .max_register =		STA350_MISC2, | 
|  | .reg_defaults =		sta350_regs, | 
|  | .num_reg_defaults =	ARRAY_SIZE(sta350_regs), | 
|  | .cache_type =		REGCACHE_MAPLE, | 
|  | .wr_table =		&sta350_write_regs, | 
|  | .rd_table =		&sta350_read_regs, | 
|  | .volatile_table =	&sta350_volatile_regs, | 
|  | }; | 
|  |  | 
|  | #ifdef CONFIG_OF | 
|  | static const struct of_device_id st350_dt_ids[] = { | 
|  | { .compatible = "st,sta350", }, | 
|  | { } | 
|  | }; | 
|  | MODULE_DEVICE_TABLE(of, st350_dt_ids); | 
|  |  | 
|  | static const char * const sta350_ffx_modes[] = { | 
|  | [STA350_FFX_PM_DROP_COMP]		= "drop-compensation", | 
|  | [STA350_FFX_PM_TAPERED_COMP]		= "tapered-compensation", | 
|  | [STA350_FFX_PM_FULL_POWER]		= "full-power-mode", | 
|  | [STA350_FFX_PM_VARIABLE_DROP_COMP]	= "variable-drop-compensation", | 
|  | }; | 
|  |  | 
|  | static int sta350_probe_dt(struct device *dev, struct sta350_priv *sta350) | 
|  | { | 
|  | struct device_node *np = dev->of_node; | 
|  | struct sta350_platform_data *pdata; | 
|  | const char *ffx_power_mode; | 
|  | u16 tmp; | 
|  | u8 tmp8; | 
|  |  | 
|  | pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL); | 
|  | if (!pdata) | 
|  | return -ENOMEM; | 
|  |  | 
|  | of_property_read_u8(np, "st,output-conf", | 
|  | &pdata->output_conf); | 
|  | of_property_read_u8(np, "st,ch1-output-mapping", | 
|  | &pdata->ch1_output_mapping); | 
|  | of_property_read_u8(np, "st,ch2-output-mapping", | 
|  | &pdata->ch2_output_mapping); | 
|  | of_property_read_u8(np, "st,ch3-output-mapping", | 
|  | &pdata->ch3_output_mapping); | 
|  |  | 
|  | pdata->thermal_warning_recovery = | 
|  | of_property_read_bool(np, "st,thermal-warning-recovery"); | 
|  | pdata->thermal_warning_adjustment = | 
|  | of_property_read_bool(np, "st,thermal-warning-adjustment"); | 
|  | pdata->fault_detect_recovery = | 
|  | of_property_read_bool(np, "st,fault-detect-recovery"); | 
|  |  | 
|  | pdata->ffx_power_output_mode = STA350_FFX_PM_VARIABLE_DROP_COMP; | 
|  | if (!of_property_read_string(np, "st,ffx-power-output-mode", | 
|  | &ffx_power_mode)) { | 
|  | int i, mode = -EINVAL; | 
|  |  | 
|  | for (i = 0; i < ARRAY_SIZE(sta350_ffx_modes); i++) | 
|  | if (!strcasecmp(ffx_power_mode, sta350_ffx_modes[i])) | 
|  | mode = i; | 
|  |  | 
|  | if (mode < 0) | 
|  | dev_warn(dev, "Unsupported ffx output mode: %s\n", | 
|  | ffx_power_mode); | 
|  | else | 
|  | pdata->ffx_power_output_mode = mode; | 
|  | } | 
|  |  | 
|  | tmp = 140; | 
|  | of_property_read_u16(np, "st,drop-compensation-ns", &tmp); | 
|  | pdata->drop_compensation_ns = clamp_t(u16, tmp, 0, 300) / 20; | 
|  |  | 
|  | pdata->oc_warning_adjustment = | 
|  | of_property_read_bool(np, "st,overcurrent-warning-adjustment"); | 
|  |  | 
|  | /* CONFE */ | 
|  | pdata->max_power_use_mpcc = | 
|  | of_property_read_bool(np, "st,max-power-use-mpcc"); | 
|  | pdata->max_power_correction = | 
|  | of_property_read_bool(np, "st,max-power-correction"); | 
|  | pdata->am_reduction_mode = | 
|  | of_property_read_bool(np, "st,am-reduction-mode"); | 
|  | pdata->odd_pwm_speed_mode = | 
|  | of_property_read_bool(np, "st,odd-pwm-speed-mode"); | 
|  | pdata->distortion_compensation = | 
|  | of_property_read_bool(np, "st,distortion-compensation"); | 
|  |  | 
|  | /* CONFF */ | 
|  | pdata->invalid_input_detect_mute = | 
|  | of_property_read_bool(np, "st,invalid-input-detect-mute"); | 
|  |  | 
|  | /* MISC */ | 
|  | pdata->activate_mute_output = | 
|  | of_property_read_bool(np, "st,activate-mute-output"); | 
|  | pdata->bridge_immediate_off = | 
|  | of_property_read_bool(np, "st,bridge-immediate-off"); | 
|  | pdata->noise_shape_dc_cut = | 
|  | of_property_read_bool(np, "st,noise-shape-dc-cut"); | 
|  | pdata->powerdown_master_vol = | 
|  | of_property_read_bool(np, "st,powerdown-master-volume"); | 
|  |  | 
|  | if (!of_property_read_u8(np, "st,powerdown-delay-divider", &tmp8)) { | 
|  | if (is_power_of_2(tmp8) && tmp8 >= 1 && tmp8 <= 128) | 
|  | pdata->powerdown_delay_divider = ilog2(tmp8); | 
|  | else | 
|  | dev_warn(dev, "Unsupported powerdown delay divider %d\n", | 
|  | tmp8); | 
|  | } | 
|  |  | 
|  | sta350->pdata = pdata; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  | #endif | 
|  |  | 
|  | static int sta350_i2c_probe(struct i2c_client *i2c) | 
|  | { | 
|  | struct device *dev = &i2c->dev; | 
|  | struct sta350_priv *sta350; | 
|  | int ret, i; | 
|  |  | 
|  | sta350 = devm_kzalloc(dev, sizeof(struct sta350_priv), GFP_KERNEL); | 
|  | if (!sta350) | 
|  | return -ENOMEM; | 
|  |  | 
|  | mutex_init(&sta350->coeff_lock); | 
|  | sta350->pdata = dev_get_platdata(dev); | 
|  |  | 
|  | #ifdef CONFIG_OF | 
|  | if (dev->of_node) { | 
|  | ret = sta350_probe_dt(dev, sta350); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  | } | 
|  | #endif | 
|  |  | 
|  | /* GPIOs */ | 
|  | sta350->gpiod_nreset = devm_gpiod_get_optional(dev, "reset", | 
|  | GPIOD_OUT_LOW); | 
|  | if (IS_ERR(sta350->gpiod_nreset)) | 
|  | return PTR_ERR(sta350->gpiod_nreset); | 
|  |  | 
|  | sta350->gpiod_power_down = devm_gpiod_get_optional(dev, "power-down", | 
|  | GPIOD_OUT_LOW); | 
|  | if (IS_ERR(sta350->gpiod_power_down)) | 
|  | return PTR_ERR(sta350->gpiod_power_down); | 
|  |  | 
|  | /* regulators */ | 
|  | for (i = 0; i < ARRAY_SIZE(sta350->supplies); i++) | 
|  | sta350->supplies[i].supply = sta350_supply_names[i]; | 
|  |  | 
|  | ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(sta350->supplies), | 
|  | sta350->supplies); | 
|  | if (ret < 0) { | 
|  | dev_err(dev, "Failed to request supplies: %d\n", ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | sta350->regmap = devm_regmap_init_i2c(i2c, &sta350_regmap); | 
|  | if (IS_ERR(sta350->regmap)) { | 
|  | ret = PTR_ERR(sta350->regmap); | 
|  | dev_err(dev, "Failed to init regmap: %d\n", ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | i2c_set_clientdata(i2c, sta350); | 
|  |  | 
|  | ret = devm_snd_soc_register_component(dev, &sta350_component, &sta350_dai, 1); | 
|  | if (ret < 0) | 
|  | dev_err(dev, "Failed to register component (%d)\n", ret); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static void sta350_i2c_remove(struct i2c_client *client) | 
|  | {} | 
|  |  | 
|  | static const struct i2c_device_id sta350_i2c_id[] = { | 
|  | { "sta350" }, | 
|  | { } | 
|  | }; | 
|  | MODULE_DEVICE_TABLE(i2c, sta350_i2c_id); | 
|  |  | 
|  | static struct i2c_driver sta350_i2c_driver = { | 
|  | .driver = { | 
|  | .name = "sta350", | 
|  | .of_match_table = of_match_ptr(st350_dt_ids), | 
|  | }, | 
|  | .probe =    sta350_i2c_probe, | 
|  | .remove =   sta350_i2c_remove, | 
|  | .id_table = sta350_i2c_id, | 
|  | }; | 
|  |  | 
|  | module_i2c_driver(sta350_i2c_driver); | 
|  |  | 
|  | MODULE_DESCRIPTION("ASoC STA350 driver"); | 
|  | MODULE_AUTHOR("Sven Brandau <info@brandau.biz>"); | 
|  | MODULE_LICENSE("GPL"); |