|  | // SPDX-License-Identifier: GPL-2.0-only | 
|  | /* | 
|  | *  GPIO driven matrix keyboard driver | 
|  | * | 
|  | *  Copyright (c) 2008 Marek Vasut <marek.vasut@gmail.com> | 
|  | * | 
|  | *  Based on corgikbd.c | 
|  | */ | 
|  |  | 
|  | #include <linux/types.h> | 
|  | #include <linux/delay.h> | 
|  | #include <linux/gpio/consumer.h> | 
|  | #include <linux/platform_device.h> | 
|  | #include <linux/input.h> | 
|  | #include <linux/irq.h> | 
|  | #include <linux/interrupt.h> | 
|  | #include <linux/jiffies.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/gpio.h> | 
|  | #include <linux/input/matrix_keypad.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/of.h> | 
|  | #include <linux/of_gpio.h> | 
|  | #include <linux/of_platform.h> | 
|  |  | 
|  | struct matrix_keypad { | 
|  | const struct matrix_keypad_platform_data *pdata; | 
|  | struct input_dev *input_dev; | 
|  | unsigned int row_shift; | 
|  |  | 
|  | DECLARE_BITMAP(disabled_gpios, MATRIX_MAX_ROWS); | 
|  |  | 
|  | uint32_t last_key_state[MATRIX_MAX_COLS]; | 
|  | struct delayed_work work; | 
|  | spinlock_t lock; | 
|  | bool scan_pending; | 
|  | bool stopped; | 
|  | bool gpio_all_disabled; | 
|  | }; | 
|  |  | 
|  | /* | 
|  | * NOTE: If drive_inactive_cols is false, then the GPIO has to be put into | 
|  | * HiZ when de-activated to cause minmal side effect when scanning other | 
|  | * columns. In that case it is configured here to be input, otherwise it is | 
|  | * driven with the inactive value. | 
|  | */ | 
|  | static void __activate_col(const struct matrix_keypad_platform_data *pdata, | 
|  | int col, bool on) | 
|  | { | 
|  | bool level_on = !pdata->active_low; | 
|  |  | 
|  | if (on) { | 
|  | gpio_direction_output(pdata->col_gpios[col], level_on); | 
|  | } else { | 
|  | gpio_set_value_cansleep(pdata->col_gpios[col], !level_on); | 
|  | if (!pdata->drive_inactive_cols) | 
|  | gpio_direction_input(pdata->col_gpios[col]); | 
|  | } | 
|  | } | 
|  |  | 
|  | static void activate_col(const struct matrix_keypad_platform_data *pdata, | 
|  | int col, bool on) | 
|  | { | 
|  | __activate_col(pdata, col, on); | 
|  |  | 
|  | if (on && pdata->col_scan_delay_us) | 
|  | udelay(pdata->col_scan_delay_us); | 
|  | } | 
|  |  | 
|  | static void activate_all_cols(const struct matrix_keypad_platform_data *pdata, | 
|  | bool on) | 
|  | { | 
|  | int col; | 
|  |  | 
|  | for (col = 0; col < pdata->num_col_gpios; col++) | 
|  | __activate_col(pdata, col, on); | 
|  | } | 
|  |  | 
|  | static bool row_asserted(const struct matrix_keypad_platform_data *pdata, | 
|  | int row) | 
|  | { | 
|  | return gpio_get_value_cansleep(pdata->row_gpios[row]) ? | 
|  | !pdata->active_low : pdata->active_low; | 
|  | } | 
|  |  | 
|  | static void enable_row_irqs(struct matrix_keypad *keypad) | 
|  | { | 
|  | const struct matrix_keypad_platform_data *pdata = keypad->pdata; | 
|  | int i; | 
|  |  | 
|  | if (pdata->clustered_irq > 0) | 
|  | enable_irq(pdata->clustered_irq); | 
|  | else { | 
|  | for (i = 0; i < pdata->num_row_gpios; i++) | 
|  | enable_irq(gpio_to_irq(pdata->row_gpios[i])); | 
|  | } | 
|  | } | 
|  |  | 
|  | static void disable_row_irqs(struct matrix_keypad *keypad) | 
|  | { | 
|  | const struct matrix_keypad_platform_data *pdata = keypad->pdata; | 
|  | int i; | 
|  |  | 
|  | if (pdata->clustered_irq > 0) | 
|  | disable_irq_nosync(pdata->clustered_irq); | 
|  | else { | 
|  | for (i = 0; i < pdata->num_row_gpios; i++) | 
|  | disable_irq_nosync(gpio_to_irq(pdata->row_gpios[i])); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | * This gets the keys from keyboard and reports it to input subsystem | 
|  | */ | 
|  | static void matrix_keypad_scan(struct work_struct *work) | 
|  | { | 
|  | struct matrix_keypad *keypad = | 
|  | container_of(work, struct matrix_keypad, work.work); | 
|  | struct input_dev *input_dev = keypad->input_dev; | 
|  | const unsigned short *keycodes = input_dev->keycode; | 
|  | const struct matrix_keypad_platform_data *pdata = keypad->pdata; | 
|  | uint32_t new_state[MATRIX_MAX_COLS]; | 
|  | int row, col, code; | 
|  |  | 
|  | /* de-activate all columns for scanning */ | 
|  | activate_all_cols(pdata, false); | 
|  |  | 
|  | memset(new_state, 0, sizeof(new_state)); | 
|  |  | 
|  | for (row = 0; row < pdata->num_row_gpios; row++) | 
|  | gpio_direction_input(pdata->row_gpios[row]); | 
|  |  | 
|  | /* assert each column and read the row status out */ | 
|  | for (col = 0; col < pdata->num_col_gpios; col++) { | 
|  |  | 
|  | activate_col(pdata, col, true); | 
|  |  | 
|  | for (row = 0; row < pdata->num_row_gpios; row++) | 
|  | new_state[col] |= | 
|  | row_asserted(pdata, row) ? (1 << row) : 0; | 
|  |  | 
|  | activate_col(pdata, col, false); | 
|  | } | 
|  |  | 
|  | for (col = 0; col < pdata->num_col_gpios; col++) { | 
|  | uint32_t bits_changed; | 
|  |  | 
|  | bits_changed = keypad->last_key_state[col] ^ new_state[col]; | 
|  | if (bits_changed == 0) | 
|  | continue; | 
|  |  | 
|  | for (row = 0; row < pdata->num_row_gpios; row++) { | 
|  | if ((bits_changed & (1 << row)) == 0) | 
|  | continue; | 
|  |  | 
|  | code = MATRIX_SCAN_CODE(row, col, keypad->row_shift); | 
|  | input_event(input_dev, EV_MSC, MSC_SCAN, code); | 
|  | input_report_key(input_dev, | 
|  | keycodes[code], | 
|  | new_state[col] & (1 << row)); | 
|  | } | 
|  | } | 
|  | input_sync(input_dev); | 
|  |  | 
|  | memcpy(keypad->last_key_state, new_state, sizeof(new_state)); | 
|  |  | 
|  | activate_all_cols(pdata, true); | 
|  |  | 
|  | /* Enable IRQs again */ | 
|  | spin_lock_irq(&keypad->lock); | 
|  | keypad->scan_pending = false; | 
|  | enable_row_irqs(keypad); | 
|  | spin_unlock_irq(&keypad->lock); | 
|  | } | 
|  |  | 
|  | static irqreturn_t matrix_keypad_interrupt(int irq, void *id) | 
|  | { | 
|  | struct matrix_keypad *keypad = id; | 
|  | unsigned long flags; | 
|  |  | 
|  | spin_lock_irqsave(&keypad->lock, flags); | 
|  |  | 
|  | /* | 
|  | * See if another IRQ beaten us to it and scheduled the | 
|  | * scan already. In that case we should not try to | 
|  | * disable IRQs again. | 
|  | */ | 
|  | if (unlikely(keypad->scan_pending || keypad->stopped)) | 
|  | goto out; | 
|  |  | 
|  | disable_row_irqs(keypad); | 
|  | keypad->scan_pending = true; | 
|  | schedule_delayed_work(&keypad->work, | 
|  | msecs_to_jiffies(keypad->pdata->debounce_ms)); | 
|  |  | 
|  | out: | 
|  | spin_unlock_irqrestore(&keypad->lock, flags); | 
|  | return IRQ_HANDLED; | 
|  | } | 
|  |  | 
|  | static int matrix_keypad_start(struct input_dev *dev) | 
|  | { | 
|  | struct matrix_keypad *keypad = input_get_drvdata(dev); | 
|  |  | 
|  | keypad->stopped = false; | 
|  | mb(); | 
|  |  | 
|  | /* | 
|  | * Schedule an immediate key scan to capture current key state; | 
|  | * columns will be activated and IRQs be enabled after the scan. | 
|  | */ | 
|  | schedule_delayed_work(&keypad->work, 0); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void matrix_keypad_stop(struct input_dev *dev) | 
|  | { | 
|  | struct matrix_keypad *keypad = input_get_drvdata(dev); | 
|  |  | 
|  | spin_lock_irq(&keypad->lock); | 
|  | keypad->stopped = true; | 
|  | spin_unlock_irq(&keypad->lock); | 
|  |  | 
|  | flush_delayed_work(&keypad->work); | 
|  | /* | 
|  | * matrix_keypad_scan() will leave IRQs enabled; | 
|  | * we should disable them now. | 
|  | */ | 
|  | disable_row_irqs(keypad); | 
|  | } | 
|  |  | 
|  | static void matrix_keypad_enable_wakeup(struct matrix_keypad *keypad) | 
|  | { | 
|  | const struct matrix_keypad_platform_data *pdata = keypad->pdata; | 
|  | unsigned int gpio; | 
|  | int i; | 
|  |  | 
|  | if (pdata->clustered_irq > 0) { | 
|  | if (enable_irq_wake(pdata->clustered_irq) == 0) | 
|  | keypad->gpio_all_disabled = true; | 
|  | } else { | 
|  |  | 
|  | for (i = 0; i < pdata->num_row_gpios; i++) { | 
|  | if (!test_bit(i, keypad->disabled_gpios)) { | 
|  | gpio = pdata->row_gpios[i]; | 
|  |  | 
|  | if (enable_irq_wake(gpio_to_irq(gpio)) == 0) | 
|  | __set_bit(i, keypad->disabled_gpios); | 
|  | } | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | static void matrix_keypad_disable_wakeup(struct matrix_keypad *keypad) | 
|  | { | 
|  | const struct matrix_keypad_platform_data *pdata = keypad->pdata; | 
|  | unsigned int gpio; | 
|  | int i; | 
|  |  | 
|  | if (pdata->clustered_irq > 0) { | 
|  | if (keypad->gpio_all_disabled) { | 
|  | disable_irq_wake(pdata->clustered_irq); | 
|  | keypad->gpio_all_disabled = false; | 
|  | } | 
|  | } else { | 
|  | for (i = 0; i < pdata->num_row_gpios; i++) { | 
|  | if (test_and_clear_bit(i, keypad->disabled_gpios)) { | 
|  | gpio = pdata->row_gpios[i]; | 
|  | disable_irq_wake(gpio_to_irq(gpio)); | 
|  | } | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | static int matrix_keypad_suspend(struct device *dev) | 
|  | { | 
|  | struct platform_device *pdev = to_platform_device(dev); | 
|  | struct matrix_keypad *keypad = platform_get_drvdata(pdev); | 
|  |  | 
|  | matrix_keypad_stop(keypad->input_dev); | 
|  |  | 
|  | if (device_may_wakeup(&pdev->dev)) | 
|  | matrix_keypad_enable_wakeup(keypad); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int matrix_keypad_resume(struct device *dev) | 
|  | { | 
|  | struct platform_device *pdev = to_platform_device(dev); | 
|  | struct matrix_keypad *keypad = platform_get_drvdata(pdev); | 
|  |  | 
|  | if (device_may_wakeup(&pdev->dev)) | 
|  | matrix_keypad_disable_wakeup(keypad); | 
|  |  | 
|  | matrix_keypad_start(keypad->input_dev); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static DEFINE_SIMPLE_DEV_PM_OPS(matrix_keypad_pm_ops, | 
|  | matrix_keypad_suspend, matrix_keypad_resume); | 
|  |  | 
|  | static int matrix_keypad_init_gpio(struct platform_device *pdev, | 
|  | struct matrix_keypad *keypad) | 
|  | { | 
|  | const struct matrix_keypad_platform_data *pdata = keypad->pdata; | 
|  | int i, err; | 
|  |  | 
|  | /* initialized strobe lines as outputs, activated */ | 
|  | for (i = 0; i < pdata->num_col_gpios; i++) { | 
|  | err = gpio_request(pdata->col_gpios[i], "matrix_kbd_col"); | 
|  | if (err) { | 
|  | dev_err(&pdev->dev, | 
|  | "failed to request GPIO%d for COL%d\n", | 
|  | pdata->col_gpios[i], i); | 
|  | goto err_free_cols; | 
|  | } | 
|  |  | 
|  | gpio_direction_output(pdata->col_gpios[i], !pdata->active_low); | 
|  | } | 
|  |  | 
|  | for (i = 0; i < pdata->num_row_gpios; i++) { | 
|  | err = gpio_request(pdata->row_gpios[i], "matrix_kbd_row"); | 
|  | if (err) { | 
|  | dev_err(&pdev->dev, | 
|  | "failed to request GPIO%d for ROW%d\n", | 
|  | pdata->row_gpios[i], i); | 
|  | goto err_free_rows; | 
|  | } | 
|  |  | 
|  | gpio_direction_input(pdata->row_gpios[i]); | 
|  | } | 
|  |  | 
|  | if (pdata->clustered_irq > 0) { | 
|  | err = request_any_context_irq(pdata->clustered_irq, | 
|  | matrix_keypad_interrupt, | 
|  | pdata->clustered_irq_flags, | 
|  | "matrix-keypad", keypad); | 
|  | if (err < 0) { | 
|  | dev_err(&pdev->dev, | 
|  | "Unable to acquire clustered interrupt\n"); | 
|  | goto err_free_rows; | 
|  | } | 
|  | } else { | 
|  | for (i = 0; i < pdata->num_row_gpios; i++) { | 
|  | err = request_any_context_irq( | 
|  | gpio_to_irq(pdata->row_gpios[i]), | 
|  | matrix_keypad_interrupt, | 
|  | IRQF_TRIGGER_RISING | | 
|  | IRQF_TRIGGER_FALLING, | 
|  | "matrix-keypad", keypad); | 
|  | if (err < 0) { | 
|  | dev_err(&pdev->dev, | 
|  | "Unable to acquire interrupt for GPIO line %i\n", | 
|  | pdata->row_gpios[i]); | 
|  | goto err_free_irqs; | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | /* initialized as disabled - enabled by input->open */ | 
|  | disable_row_irqs(keypad); | 
|  | return 0; | 
|  |  | 
|  | err_free_irqs: | 
|  | while (--i >= 0) | 
|  | free_irq(gpio_to_irq(pdata->row_gpios[i]), keypad); | 
|  | i = pdata->num_row_gpios; | 
|  | err_free_rows: | 
|  | while (--i >= 0) | 
|  | gpio_free(pdata->row_gpios[i]); | 
|  | i = pdata->num_col_gpios; | 
|  | err_free_cols: | 
|  | while (--i >= 0) | 
|  | gpio_free(pdata->col_gpios[i]); | 
|  |  | 
|  | return err; | 
|  | } | 
|  |  | 
|  | static void matrix_keypad_free_gpio(struct matrix_keypad *keypad) | 
|  | { | 
|  | const struct matrix_keypad_platform_data *pdata = keypad->pdata; | 
|  | int i; | 
|  |  | 
|  | if (pdata->clustered_irq > 0) { | 
|  | free_irq(pdata->clustered_irq, keypad); | 
|  | } else { | 
|  | for (i = 0; i < pdata->num_row_gpios; i++) | 
|  | free_irq(gpio_to_irq(pdata->row_gpios[i]), keypad); | 
|  | } | 
|  |  | 
|  | for (i = 0; i < pdata->num_row_gpios; i++) | 
|  | gpio_free(pdata->row_gpios[i]); | 
|  |  | 
|  | for (i = 0; i < pdata->num_col_gpios; i++) | 
|  | gpio_free(pdata->col_gpios[i]); | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_OF | 
|  | static struct matrix_keypad_platform_data * | 
|  | matrix_keypad_parse_dt(struct device *dev) | 
|  | { | 
|  | struct matrix_keypad_platform_data *pdata; | 
|  | struct device_node *np = dev->of_node; | 
|  | unsigned int *gpios; | 
|  | int ret, i, nrow, ncol; | 
|  |  | 
|  | if (!np) { | 
|  | dev_err(dev, "device lacks DT data\n"); | 
|  | return ERR_PTR(-ENODEV); | 
|  | } | 
|  |  | 
|  | pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL); | 
|  | if (!pdata) { | 
|  | dev_err(dev, "could not allocate memory for platform data\n"); | 
|  | return ERR_PTR(-ENOMEM); | 
|  | } | 
|  |  | 
|  | pdata->num_row_gpios = nrow = gpiod_count(dev, "row"); | 
|  | pdata->num_col_gpios = ncol = gpiod_count(dev, "col"); | 
|  | if (nrow < 0 || ncol < 0) { | 
|  | dev_err(dev, "number of keypad rows/columns not specified\n"); | 
|  | return ERR_PTR(-EINVAL); | 
|  | } | 
|  |  | 
|  | pdata->no_autorepeat = of_property_read_bool(np, "linux,no-autorepeat"); | 
|  |  | 
|  | pdata->wakeup = of_property_read_bool(np, "wakeup-source") || | 
|  | of_property_read_bool(np, "linux,wakeup"); /* legacy */ | 
|  |  | 
|  | pdata->active_low = of_property_read_bool(np, "gpio-activelow"); | 
|  |  | 
|  | pdata->drive_inactive_cols = | 
|  | of_property_read_bool(np, "drive-inactive-cols"); | 
|  |  | 
|  | of_property_read_u32(np, "debounce-delay-ms", &pdata->debounce_ms); | 
|  | of_property_read_u32(np, "col-scan-delay-us", | 
|  | &pdata->col_scan_delay_us); | 
|  |  | 
|  | gpios = devm_kcalloc(dev, | 
|  | pdata->num_row_gpios + pdata->num_col_gpios, | 
|  | sizeof(unsigned int), | 
|  | GFP_KERNEL); | 
|  | if (!gpios) { | 
|  | dev_err(dev, "could not allocate memory for gpios\n"); | 
|  | return ERR_PTR(-ENOMEM); | 
|  | } | 
|  |  | 
|  | for (i = 0; i < nrow; i++) { | 
|  | ret = of_get_named_gpio(np, "row-gpios", i); | 
|  | if (ret < 0) | 
|  | return ERR_PTR(ret); | 
|  | gpios[i] = ret; | 
|  | } | 
|  |  | 
|  | for (i = 0; i < ncol; i++) { | 
|  | ret = of_get_named_gpio(np, "col-gpios", i); | 
|  | if (ret < 0) | 
|  | return ERR_PTR(ret); | 
|  | gpios[nrow + i] = ret; | 
|  | } | 
|  |  | 
|  | pdata->row_gpios = gpios; | 
|  | pdata->col_gpios = &gpios[pdata->num_row_gpios]; | 
|  |  | 
|  | return pdata; | 
|  | } | 
|  | #else | 
|  | static inline struct matrix_keypad_platform_data * | 
|  | matrix_keypad_parse_dt(struct device *dev) | 
|  | { | 
|  | dev_err(dev, "no platform data defined\n"); | 
|  |  | 
|  | return ERR_PTR(-EINVAL); | 
|  | } | 
|  | #endif | 
|  |  | 
|  | static int matrix_keypad_probe(struct platform_device *pdev) | 
|  | { | 
|  | const struct matrix_keypad_platform_data *pdata; | 
|  | struct matrix_keypad *keypad; | 
|  | struct input_dev *input_dev; | 
|  | int err; | 
|  |  | 
|  | pdata = dev_get_platdata(&pdev->dev); | 
|  | if (!pdata) { | 
|  | pdata = matrix_keypad_parse_dt(&pdev->dev); | 
|  | if (IS_ERR(pdata)) | 
|  | return PTR_ERR(pdata); | 
|  | } else if (!pdata->keymap_data) { | 
|  | dev_err(&pdev->dev, "no keymap data defined\n"); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | keypad = kzalloc(sizeof(struct matrix_keypad), GFP_KERNEL); | 
|  | input_dev = input_allocate_device(); | 
|  | if (!keypad || !input_dev) { | 
|  | err = -ENOMEM; | 
|  | goto err_free_mem; | 
|  | } | 
|  |  | 
|  | keypad->input_dev = input_dev; | 
|  | keypad->pdata = pdata; | 
|  | keypad->row_shift = get_count_order(pdata->num_col_gpios); | 
|  | keypad->stopped = true; | 
|  | INIT_DELAYED_WORK(&keypad->work, matrix_keypad_scan); | 
|  | spin_lock_init(&keypad->lock); | 
|  |  | 
|  | input_dev->name		= pdev->name; | 
|  | input_dev->id.bustype	= BUS_HOST; | 
|  | input_dev->dev.parent	= &pdev->dev; | 
|  | input_dev->open		= matrix_keypad_start; | 
|  | input_dev->close	= matrix_keypad_stop; | 
|  |  | 
|  | err = matrix_keypad_build_keymap(pdata->keymap_data, NULL, | 
|  | pdata->num_row_gpios, | 
|  | pdata->num_col_gpios, | 
|  | NULL, input_dev); | 
|  | if (err) { | 
|  | dev_err(&pdev->dev, "failed to build keymap\n"); | 
|  | goto err_free_mem; | 
|  | } | 
|  |  | 
|  | if (!pdata->no_autorepeat) | 
|  | __set_bit(EV_REP, input_dev->evbit); | 
|  | input_set_capability(input_dev, EV_MSC, MSC_SCAN); | 
|  | input_set_drvdata(input_dev, keypad); | 
|  |  | 
|  | err = matrix_keypad_init_gpio(pdev, keypad); | 
|  | if (err) | 
|  | goto err_free_mem; | 
|  |  | 
|  | err = input_register_device(keypad->input_dev); | 
|  | if (err) | 
|  | goto err_free_gpio; | 
|  |  | 
|  | device_init_wakeup(&pdev->dev, pdata->wakeup); | 
|  | platform_set_drvdata(pdev, keypad); | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | err_free_gpio: | 
|  | matrix_keypad_free_gpio(keypad); | 
|  | err_free_mem: | 
|  | input_free_device(input_dev); | 
|  | kfree(keypad); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | static void matrix_keypad_remove(struct platform_device *pdev) | 
|  | { | 
|  | struct matrix_keypad *keypad = platform_get_drvdata(pdev); | 
|  |  | 
|  | matrix_keypad_free_gpio(keypad); | 
|  | input_unregister_device(keypad->input_dev); | 
|  | kfree(keypad); | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_OF | 
|  | static const struct of_device_id matrix_keypad_dt_match[] = { | 
|  | { .compatible = "gpio-matrix-keypad" }, | 
|  | { } | 
|  | }; | 
|  | MODULE_DEVICE_TABLE(of, matrix_keypad_dt_match); | 
|  | #endif | 
|  |  | 
|  | static struct platform_driver matrix_keypad_driver = { | 
|  | .probe		= matrix_keypad_probe, | 
|  | .remove_new	= matrix_keypad_remove, | 
|  | .driver		= { | 
|  | .name	= "matrix-keypad", | 
|  | .pm	= pm_sleep_ptr(&matrix_keypad_pm_ops), | 
|  | .of_match_table = of_match_ptr(matrix_keypad_dt_match), | 
|  | }, | 
|  | }; | 
|  | module_platform_driver(matrix_keypad_driver); | 
|  |  | 
|  | MODULE_AUTHOR("Marek Vasut <marek.vasut@gmail.com>"); | 
|  | MODULE_DESCRIPTION("GPIO Driven Matrix Keypad Driver"); | 
|  | MODULE_LICENSE("GPL v2"); | 
|  | MODULE_ALIAS("platform:matrix-keypad"); |