| // SPDX-License-Identifier: GPL-2.0 | 
 | /* | 
 |  * Thunderbolt driver - Tunneling support | 
 |  * | 
 |  * Copyright (c) 2014 Andreas Noever <andreas.noever@gmail.com> | 
 |  * Copyright (C) 2019, Intel Corporation | 
 |  */ | 
 |  | 
 | #include <linux/delay.h> | 
 | #include <linux/slab.h> | 
 | #include <linux/list.h> | 
 | #include <linux/ktime.h> | 
 | #include <linux/string_helpers.h> | 
 |  | 
 | #include "tunnel.h" | 
 | #include "tb.h" | 
 |  | 
 | /* PCIe adapters use always HopID of 8 for both directions */ | 
 | #define TB_PCI_HOPID			8 | 
 |  | 
 | #define TB_PCI_PATH_DOWN		0 | 
 | #define TB_PCI_PATH_UP			1 | 
 |  | 
 | #define TB_PCI_PRIORITY			3 | 
 | #define TB_PCI_WEIGHT			1 | 
 |  | 
 | /* USB3 adapters use always HopID of 8 for both directions */ | 
 | #define TB_USB3_HOPID			8 | 
 |  | 
 | #define TB_USB3_PATH_DOWN		0 | 
 | #define TB_USB3_PATH_UP			1 | 
 |  | 
 | #define TB_USB3_PRIORITY		3 | 
 | #define TB_USB3_WEIGHT			2 | 
 |  | 
 | /* DP adapters use HopID 8 for AUX and 9 for Video */ | 
 | #define TB_DP_AUX_TX_HOPID		8 | 
 | #define TB_DP_AUX_RX_HOPID		8 | 
 | #define TB_DP_VIDEO_HOPID		9 | 
 |  | 
 | #define TB_DP_VIDEO_PATH_OUT		0 | 
 | #define TB_DP_AUX_PATH_OUT		1 | 
 | #define TB_DP_AUX_PATH_IN		2 | 
 |  | 
 | #define TB_DP_VIDEO_PRIORITY		1 | 
 | #define TB_DP_VIDEO_WEIGHT		1 | 
 |  | 
 | #define TB_DP_AUX_PRIORITY		2 | 
 | #define TB_DP_AUX_WEIGHT		1 | 
 |  | 
 | /* Minimum number of credits needed for PCIe path */ | 
 | #define TB_MIN_PCIE_CREDITS		6U | 
 | /* | 
 |  * Number of credits we try to allocate for each DMA path if not limited | 
 |  * by the host router baMaxHI. | 
 |  */ | 
 | #define TB_DMA_CREDITS			14 | 
 | /* Minimum number of credits for DMA path */ | 
 | #define TB_MIN_DMA_CREDITS		1 | 
 |  | 
 | #define TB_DMA_PRIORITY			5 | 
 | #define TB_DMA_WEIGHT			1 | 
 |  | 
 | /* | 
 |  * Reserve additional bandwidth for USB 3.x and PCIe bulk traffic | 
 |  * according to USB4 v2 Connection Manager guide. This ends up reserving | 
 |  * 1500 Mb/s for PCIe and 3000 Mb/s for USB 3.x taking weights into | 
 |  * account. | 
 |  */ | 
 | #define USB4_V2_PCI_MIN_BANDWIDTH	(1500 * TB_PCI_WEIGHT) | 
 | #define USB4_V2_USB3_MIN_BANDWIDTH	(1500 * TB_USB3_WEIGHT) | 
 |  | 
 | static unsigned int dma_credits = TB_DMA_CREDITS; | 
 | module_param(dma_credits, uint, 0444); | 
 | MODULE_PARM_DESC(dma_credits, "specify custom credits for DMA tunnels (default: " | 
 |                 __MODULE_STRING(TB_DMA_CREDITS) ")"); | 
 |  | 
 | static bool bw_alloc_mode = true; | 
 | module_param(bw_alloc_mode, bool, 0444); | 
 | MODULE_PARM_DESC(bw_alloc_mode, | 
 | 		 "enable bandwidth allocation mode if supported (default: true)"); | 
 |  | 
 | static const char * const tb_tunnel_names[] = { "PCI", "DP", "DMA", "USB3" }; | 
 |  | 
 | static inline unsigned int tb_usable_credits(const struct tb_port *port) | 
 | { | 
 | 	return port->total_credits - port->ctl_credits; | 
 | } | 
 |  | 
 | /** | 
 |  * tb_available_credits() - Available credits for PCIe and DMA | 
 |  * @port: Lane adapter to check | 
 |  * @max_dp_streams: If non-%NULL stores maximum number of simultaneous DP | 
 |  *		    streams possible through this lane adapter | 
 |  */ | 
 | static unsigned int tb_available_credits(const struct tb_port *port, | 
 | 					 size_t *max_dp_streams) | 
 | { | 
 | 	const struct tb_switch *sw = port->sw; | 
 | 	int credits, usb3, pcie, spare; | 
 | 	size_t ndp; | 
 |  | 
 | 	usb3 = tb_acpi_may_tunnel_usb3() ? sw->max_usb3_credits : 0; | 
 | 	pcie = tb_acpi_may_tunnel_pcie() ? sw->max_pcie_credits : 0; | 
 |  | 
 | 	if (tb_acpi_is_xdomain_allowed()) { | 
 | 		spare = min_not_zero(sw->max_dma_credits, dma_credits); | 
 | 		/* Add some credits for potential second DMA tunnel */ | 
 | 		spare += TB_MIN_DMA_CREDITS; | 
 | 	} else { | 
 | 		spare = 0; | 
 | 	} | 
 |  | 
 | 	credits = tb_usable_credits(port); | 
 | 	if (tb_acpi_may_tunnel_dp()) { | 
 | 		/* | 
 | 		 * Maximum number of DP streams possible through the | 
 | 		 * lane adapter. | 
 | 		 */ | 
 | 		if (sw->min_dp_aux_credits + sw->min_dp_main_credits) | 
 | 			ndp = (credits - (usb3 + pcie + spare)) / | 
 | 			      (sw->min_dp_aux_credits + sw->min_dp_main_credits); | 
 | 		else | 
 | 			ndp = 0; | 
 | 	} else { | 
 | 		ndp = 0; | 
 | 	} | 
 | 	credits -= ndp * (sw->min_dp_aux_credits + sw->min_dp_main_credits); | 
 | 	credits -= usb3; | 
 |  | 
 | 	if (max_dp_streams) | 
 | 		*max_dp_streams = ndp; | 
 |  | 
 | 	return credits > 0 ? credits : 0; | 
 | } | 
 |  | 
 | static void tb_init_pm_support(struct tb_path_hop *hop) | 
 | { | 
 | 	struct tb_port *out_port = hop->out_port; | 
 | 	struct tb_port *in_port = hop->in_port; | 
 |  | 
 | 	if (tb_port_is_null(in_port) && tb_port_is_null(out_port) && | 
 | 	    usb4_switch_version(in_port->sw) >= 2) | 
 | 		hop->pm_support = true; | 
 | } | 
 |  | 
 | static struct tb_tunnel *tb_tunnel_alloc(struct tb *tb, size_t npaths, | 
 | 					 enum tb_tunnel_type type) | 
 | { | 
 | 	struct tb_tunnel *tunnel; | 
 |  | 
 | 	tunnel = kzalloc(sizeof(*tunnel), GFP_KERNEL); | 
 | 	if (!tunnel) | 
 | 		return NULL; | 
 |  | 
 | 	tunnel->paths = kcalloc(npaths, sizeof(tunnel->paths[0]), GFP_KERNEL); | 
 | 	if (!tunnel->paths) { | 
 | 		tb_tunnel_free(tunnel); | 
 | 		return NULL; | 
 | 	} | 
 |  | 
 | 	INIT_LIST_HEAD(&tunnel->list); | 
 | 	tunnel->tb = tb; | 
 | 	tunnel->npaths = npaths; | 
 | 	tunnel->type = type; | 
 |  | 
 | 	return tunnel; | 
 | } | 
 |  | 
 | static int tb_pci_set_ext_encapsulation(struct tb_tunnel *tunnel, bool enable) | 
 | { | 
 | 	struct tb_port *port = tb_upstream_port(tunnel->dst_port->sw); | 
 | 	int ret; | 
 |  | 
 | 	/* Only supported of both routers are at least USB4 v2 */ | 
 | 	if ((usb4_switch_version(tunnel->src_port->sw) < 2) || | 
 | 	   (usb4_switch_version(tunnel->dst_port->sw) < 2)) | 
 | 		return 0; | 
 |  | 
 | 	if (enable && tb_port_get_link_generation(port) < 4) | 
 | 		return 0; | 
 |  | 
 | 	ret = usb4_pci_port_set_ext_encapsulation(tunnel->src_port, enable); | 
 | 	if (ret) | 
 | 		return ret; | 
 |  | 
 | 	/* | 
 | 	 * Downstream router could be unplugged so disable of encapsulation | 
 | 	 * in upstream router is still possible. | 
 | 	 */ | 
 | 	ret = usb4_pci_port_set_ext_encapsulation(tunnel->dst_port, enable); | 
 | 	if (ret) { | 
 | 		if (enable) | 
 | 			return ret; | 
 | 		if (ret != -ENODEV) | 
 | 			return ret; | 
 | 	} | 
 |  | 
 | 	tb_tunnel_dbg(tunnel, "extended encapsulation %s\n", | 
 | 		      str_enabled_disabled(enable)); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int tb_pci_activate(struct tb_tunnel *tunnel, bool activate) | 
 | { | 
 | 	int res; | 
 |  | 
 | 	if (activate) { | 
 | 		res = tb_pci_set_ext_encapsulation(tunnel, activate); | 
 | 		if (res) | 
 | 			return res; | 
 | 	} | 
 |  | 
 | 	if (activate) | 
 | 		res = tb_pci_port_enable(tunnel->dst_port, activate); | 
 | 	else | 
 | 		res = tb_pci_port_enable(tunnel->src_port, activate); | 
 | 	if (res) | 
 | 		return res; | 
 |  | 
 |  | 
 | 	if (activate) { | 
 | 		res = tb_pci_port_enable(tunnel->src_port, activate); | 
 | 		if (res) | 
 | 			return res; | 
 | 	} else { | 
 | 		/* Downstream router could be unplugged */ | 
 | 		tb_pci_port_enable(tunnel->dst_port, activate); | 
 | 	} | 
 |  | 
 | 	return activate ? 0 : tb_pci_set_ext_encapsulation(tunnel, activate); | 
 | } | 
 |  | 
 | static int tb_pci_init_credits(struct tb_path_hop *hop) | 
 | { | 
 | 	struct tb_port *port = hop->in_port; | 
 | 	struct tb_switch *sw = port->sw; | 
 | 	unsigned int credits; | 
 |  | 
 | 	if (tb_port_use_credit_allocation(port)) { | 
 | 		unsigned int available; | 
 |  | 
 | 		available = tb_available_credits(port, NULL); | 
 | 		credits = min(sw->max_pcie_credits, available); | 
 |  | 
 | 		if (credits < TB_MIN_PCIE_CREDITS) | 
 | 			return -ENOSPC; | 
 |  | 
 | 		credits = max(TB_MIN_PCIE_CREDITS, credits); | 
 | 	} else { | 
 | 		if (tb_port_is_null(port)) | 
 | 			credits = port->bonded ? 32 : 16; | 
 | 		else | 
 | 			credits = 7; | 
 | 	} | 
 |  | 
 | 	hop->initial_credits = credits; | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int tb_pci_init_path(struct tb_path *path) | 
 | { | 
 | 	struct tb_path_hop *hop; | 
 |  | 
 | 	path->egress_fc_enable = TB_PATH_SOURCE | TB_PATH_INTERNAL; | 
 | 	path->egress_shared_buffer = TB_PATH_NONE; | 
 | 	path->ingress_fc_enable = TB_PATH_ALL; | 
 | 	path->ingress_shared_buffer = TB_PATH_NONE; | 
 | 	path->priority = TB_PCI_PRIORITY; | 
 | 	path->weight = TB_PCI_WEIGHT; | 
 | 	path->drop_packages = 0; | 
 |  | 
 | 	tb_path_for_each_hop(path, hop) { | 
 | 		int ret; | 
 |  | 
 | 		ret = tb_pci_init_credits(hop); | 
 | 		if (ret) | 
 | 			return ret; | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | /** | 
 |  * tb_tunnel_discover_pci() - Discover existing PCIe tunnels | 
 |  * @tb: Pointer to the domain structure | 
 |  * @down: PCIe downstream adapter | 
 |  * @alloc_hopid: Allocate HopIDs from visited ports | 
 |  * | 
 |  * If @down adapter is active, follows the tunnel to the PCIe upstream | 
 |  * adapter and back. Returns the discovered tunnel or %NULL if there was | 
 |  * no tunnel. | 
 |  */ | 
 | struct tb_tunnel *tb_tunnel_discover_pci(struct tb *tb, struct tb_port *down, | 
 | 					 bool alloc_hopid) | 
 | { | 
 | 	struct tb_tunnel *tunnel; | 
 | 	struct tb_path *path; | 
 |  | 
 | 	if (!tb_pci_port_is_enabled(down)) | 
 | 		return NULL; | 
 |  | 
 | 	tunnel = tb_tunnel_alloc(tb, 2, TB_TUNNEL_PCI); | 
 | 	if (!tunnel) | 
 | 		return NULL; | 
 |  | 
 | 	tunnel->activate = tb_pci_activate; | 
 | 	tunnel->src_port = down; | 
 |  | 
 | 	/* | 
 | 	 * Discover both paths even if they are not complete. We will | 
 | 	 * clean them up by calling tb_tunnel_deactivate() below in that | 
 | 	 * case. | 
 | 	 */ | 
 | 	path = tb_path_discover(down, TB_PCI_HOPID, NULL, -1, | 
 | 				&tunnel->dst_port, "PCIe Up", alloc_hopid); | 
 | 	if (!path) { | 
 | 		/* Just disable the downstream port */ | 
 | 		tb_pci_port_enable(down, false); | 
 | 		goto err_free; | 
 | 	} | 
 | 	tunnel->paths[TB_PCI_PATH_UP] = path; | 
 | 	if (tb_pci_init_path(tunnel->paths[TB_PCI_PATH_UP])) | 
 | 		goto err_free; | 
 |  | 
 | 	path = tb_path_discover(tunnel->dst_port, -1, down, TB_PCI_HOPID, NULL, | 
 | 				"PCIe Down", alloc_hopid); | 
 | 	if (!path) | 
 | 		goto err_deactivate; | 
 | 	tunnel->paths[TB_PCI_PATH_DOWN] = path; | 
 | 	if (tb_pci_init_path(tunnel->paths[TB_PCI_PATH_DOWN])) | 
 | 		goto err_deactivate; | 
 |  | 
 | 	/* Validate that the tunnel is complete */ | 
 | 	if (!tb_port_is_pcie_up(tunnel->dst_port)) { | 
 | 		tb_port_warn(tunnel->dst_port, | 
 | 			     "path does not end on a PCIe adapter, cleaning up\n"); | 
 | 		goto err_deactivate; | 
 | 	} | 
 |  | 
 | 	if (down != tunnel->src_port) { | 
 | 		tb_tunnel_warn(tunnel, "path is not complete, cleaning up\n"); | 
 | 		goto err_deactivate; | 
 | 	} | 
 |  | 
 | 	if (!tb_pci_port_is_enabled(tunnel->dst_port)) { | 
 | 		tb_tunnel_warn(tunnel, | 
 | 			       "tunnel is not fully activated, cleaning up\n"); | 
 | 		goto err_deactivate; | 
 | 	} | 
 |  | 
 | 	tb_tunnel_dbg(tunnel, "discovered\n"); | 
 | 	return tunnel; | 
 |  | 
 | err_deactivate: | 
 | 	tb_tunnel_deactivate(tunnel); | 
 | err_free: | 
 | 	tb_tunnel_free(tunnel); | 
 |  | 
 | 	return NULL; | 
 | } | 
 |  | 
 | /** | 
 |  * tb_tunnel_alloc_pci() - allocate a pci tunnel | 
 |  * @tb: Pointer to the domain structure | 
 |  * @up: PCIe upstream adapter port | 
 |  * @down: PCIe downstream adapter port | 
 |  * | 
 |  * Allocate a PCI tunnel. The ports must be of type TB_TYPE_PCIE_UP and | 
 |  * TB_TYPE_PCIE_DOWN. | 
 |  * | 
 |  * Return: Returns a tb_tunnel on success or NULL on failure. | 
 |  */ | 
 | struct tb_tunnel *tb_tunnel_alloc_pci(struct tb *tb, struct tb_port *up, | 
 | 				      struct tb_port *down) | 
 | { | 
 | 	struct tb_tunnel *tunnel; | 
 | 	struct tb_path *path; | 
 |  | 
 | 	tunnel = tb_tunnel_alloc(tb, 2, TB_TUNNEL_PCI); | 
 | 	if (!tunnel) | 
 | 		return NULL; | 
 |  | 
 | 	tunnel->activate = tb_pci_activate; | 
 | 	tunnel->src_port = down; | 
 | 	tunnel->dst_port = up; | 
 |  | 
 | 	path = tb_path_alloc(tb, down, TB_PCI_HOPID, up, TB_PCI_HOPID, 0, | 
 | 			     "PCIe Down"); | 
 | 	if (!path) | 
 | 		goto err_free; | 
 | 	tunnel->paths[TB_PCI_PATH_DOWN] = path; | 
 | 	if (tb_pci_init_path(path)) | 
 | 		goto err_free; | 
 |  | 
 | 	path = tb_path_alloc(tb, up, TB_PCI_HOPID, down, TB_PCI_HOPID, 0, | 
 | 			     "PCIe Up"); | 
 | 	if (!path) | 
 | 		goto err_free; | 
 | 	tunnel->paths[TB_PCI_PATH_UP] = path; | 
 | 	if (tb_pci_init_path(path)) | 
 | 		goto err_free; | 
 |  | 
 | 	return tunnel; | 
 |  | 
 | err_free: | 
 | 	tb_tunnel_free(tunnel); | 
 | 	return NULL; | 
 | } | 
 |  | 
 | /** | 
 |  * tb_tunnel_reserved_pci() - Amount of bandwidth to reserve for PCIe | 
 |  * @port: Lane 0 adapter | 
 |  * @reserved_up: Upstream bandwidth in Mb/s to reserve | 
 |  * @reserved_down: Downstream bandwidth in Mb/s to reserve | 
 |  * | 
 |  * Can be called to any connected lane 0 adapter to find out how much | 
 |  * bandwidth needs to be left in reserve for possible PCIe bulk traffic. | 
 |  * Returns true if there is something to be reserved and writes the | 
 |  * amount to @reserved_down/@reserved_up. Otherwise returns false and | 
 |  * does not touch the parameters. | 
 |  */ | 
 | bool tb_tunnel_reserved_pci(struct tb_port *port, int *reserved_up, | 
 | 			    int *reserved_down) | 
 | { | 
 | 	if (WARN_ON_ONCE(!port->remote)) | 
 | 		return false; | 
 |  | 
 | 	if (!tb_acpi_may_tunnel_pcie()) | 
 | 		return false; | 
 |  | 
 | 	if (tb_port_get_link_generation(port) < 4) | 
 | 		return false; | 
 |  | 
 | 	/* Must have PCIe adapters */ | 
 | 	if (tb_is_upstream_port(port)) { | 
 | 		if (!tb_switch_find_port(port->sw, TB_TYPE_PCIE_UP)) | 
 | 			return false; | 
 | 		if (!tb_switch_find_port(port->remote->sw, TB_TYPE_PCIE_DOWN)) | 
 | 			return false; | 
 | 	} else { | 
 | 		if (!tb_switch_find_port(port->sw, TB_TYPE_PCIE_DOWN)) | 
 | 			return false; | 
 | 		if (!tb_switch_find_port(port->remote->sw, TB_TYPE_PCIE_UP)) | 
 | 			return false; | 
 | 	} | 
 |  | 
 | 	*reserved_up = USB4_V2_PCI_MIN_BANDWIDTH; | 
 | 	*reserved_down = USB4_V2_PCI_MIN_BANDWIDTH; | 
 |  | 
 | 	tb_port_dbg(port, "reserving %u/%u Mb/s for PCIe\n", *reserved_up, | 
 | 		    *reserved_down); | 
 | 	return true; | 
 | } | 
 |  | 
 | static bool tb_dp_is_usb4(const struct tb_switch *sw) | 
 | { | 
 | 	/* Titan Ridge DP adapters need the same treatment as USB4 */ | 
 | 	return tb_switch_is_usb4(sw) || tb_switch_is_titan_ridge(sw); | 
 | } | 
 |  | 
 | static int tb_dp_cm_handshake(struct tb_port *in, struct tb_port *out, | 
 | 			      int timeout_msec) | 
 | { | 
 | 	ktime_t timeout = ktime_add_ms(ktime_get(), timeout_msec); | 
 | 	u32 val; | 
 | 	int ret; | 
 |  | 
 | 	/* Both ends need to support this */ | 
 | 	if (!tb_dp_is_usb4(in->sw) || !tb_dp_is_usb4(out->sw)) | 
 | 		return 0; | 
 |  | 
 | 	ret = tb_port_read(out, &val, TB_CFG_PORT, | 
 | 			   out->cap_adap + DP_STATUS_CTRL, 1); | 
 | 	if (ret) | 
 | 		return ret; | 
 |  | 
 | 	val |= DP_STATUS_CTRL_UF | DP_STATUS_CTRL_CMHS; | 
 |  | 
 | 	ret = tb_port_write(out, &val, TB_CFG_PORT, | 
 | 			    out->cap_adap + DP_STATUS_CTRL, 1); | 
 | 	if (ret) | 
 | 		return ret; | 
 |  | 
 | 	do { | 
 | 		ret = tb_port_read(out, &val, TB_CFG_PORT, | 
 | 				   out->cap_adap + DP_STATUS_CTRL, 1); | 
 | 		if (ret) | 
 | 			return ret; | 
 | 		if (!(val & DP_STATUS_CTRL_CMHS)) | 
 | 			return 0; | 
 | 		usleep_range(100, 150); | 
 | 	} while (ktime_before(ktime_get(), timeout)); | 
 |  | 
 | 	return -ETIMEDOUT; | 
 | } | 
 |  | 
 | /* | 
 |  * Returns maximum possible rate from capability supporting only DP 2.0 | 
 |  * and below. Used when DP BW allocation mode is not enabled. | 
 |  */ | 
 | static inline u32 tb_dp_cap_get_rate(u32 val) | 
 | { | 
 | 	u32 rate = (val & DP_COMMON_CAP_RATE_MASK) >> DP_COMMON_CAP_RATE_SHIFT; | 
 |  | 
 | 	switch (rate) { | 
 | 	case DP_COMMON_CAP_RATE_RBR: | 
 | 		return 1620; | 
 | 	case DP_COMMON_CAP_RATE_HBR: | 
 | 		return 2700; | 
 | 	case DP_COMMON_CAP_RATE_HBR2: | 
 | 		return 5400; | 
 | 	case DP_COMMON_CAP_RATE_HBR3: | 
 | 		return 8100; | 
 | 	default: | 
 | 		return 0; | 
 | 	} | 
 | } | 
 |  | 
 | /* | 
 |  * Returns maximum possible rate from capability supporting DP 2.1 | 
 |  * UHBR20, 13.5 and 10 rates as well. Use only when DP BW allocation | 
 |  * mode is enabled. | 
 |  */ | 
 | static inline u32 tb_dp_cap_get_rate_ext(u32 val) | 
 | { | 
 | 	if (val & DP_COMMON_CAP_UHBR20) | 
 | 		return 20000; | 
 | 	else if (val & DP_COMMON_CAP_UHBR13_5) | 
 | 		return 13500; | 
 | 	else if (val & DP_COMMON_CAP_UHBR10) | 
 | 		return 10000; | 
 |  | 
 | 	return tb_dp_cap_get_rate(val); | 
 | } | 
 |  | 
 | static inline bool tb_dp_is_uhbr_rate(unsigned int rate) | 
 | { | 
 | 	return rate >= 10000; | 
 | } | 
 |  | 
 | static inline u32 tb_dp_cap_set_rate(u32 val, u32 rate) | 
 | { | 
 | 	val &= ~DP_COMMON_CAP_RATE_MASK; | 
 | 	switch (rate) { | 
 | 	default: | 
 | 		WARN(1, "invalid rate %u passed, defaulting to 1620 MB/s\n", rate); | 
 | 		fallthrough; | 
 | 	case 1620: | 
 | 		val |= DP_COMMON_CAP_RATE_RBR << DP_COMMON_CAP_RATE_SHIFT; | 
 | 		break; | 
 | 	case 2700: | 
 | 		val |= DP_COMMON_CAP_RATE_HBR << DP_COMMON_CAP_RATE_SHIFT; | 
 | 		break; | 
 | 	case 5400: | 
 | 		val |= DP_COMMON_CAP_RATE_HBR2 << DP_COMMON_CAP_RATE_SHIFT; | 
 | 		break; | 
 | 	case 8100: | 
 | 		val |= DP_COMMON_CAP_RATE_HBR3 << DP_COMMON_CAP_RATE_SHIFT; | 
 | 		break; | 
 | 	} | 
 | 	return val; | 
 | } | 
 |  | 
 | static inline u32 tb_dp_cap_get_lanes(u32 val) | 
 | { | 
 | 	u32 lanes = (val & DP_COMMON_CAP_LANES_MASK) >> DP_COMMON_CAP_LANES_SHIFT; | 
 |  | 
 | 	switch (lanes) { | 
 | 	case DP_COMMON_CAP_1_LANE: | 
 | 		return 1; | 
 | 	case DP_COMMON_CAP_2_LANES: | 
 | 		return 2; | 
 | 	case DP_COMMON_CAP_4_LANES: | 
 | 		return 4; | 
 | 	default: | 
 | 		return 0; | 
 | 	} | 
 | } | 
 |  | 
 | static inline u32 tb_dp_cap_set_lanes(u32 val, u32 lanes) | 
 | { | 
 | 	val &= ~DP_COMMON_CAP_LANES_MASK; | 
 | 	switch (lanes) { | 
 | 	default: | 
 | 		WARN(1, "invalid number of lanes %u passed, defaulting to 1\n", | 
 | 		     lanes); | 
 | 		fallthrough; | 
 | 	case 1: | 
 | 		val |= DP_COMMON_CAP_1_LANE << DP_COMMON_CAP_LANES_SHIFT; | 
 | 		break; | 
 | 	case 2: | 
 | 		val |= DP_COMMON_CAP_2_LANES << DP_COMMON_CAP_LANES_SHIFT; | 
 | 		break; | 
 | 	case 4: | 
 | 		val |= DP_COMMON_CAP_4_LANES << DP_COMMON_CAP_LANES_SHIFT; | 
 | 		break; | 
 | 	} | 
 | 	return val; | 
 | } | 
 |  | 
 | static unsigned int tb_dp_bandwidth(unsigned int rate, unsigned int lanes) | 
 | { | 
 | 	/* Tunneling removes the DP 8b/10b 128/132b encoding */ | 
 | 	if (tb_dp_is_uhbr_rate(rate)) | 
 | 		return rate * lanes * 128 / 132; | 
 | 	return rate * lanes * 8 / 10; | 
 | } | 
 |  | 
 | static int tb_dp_reduce_bandwidth(int max_bw, u32 in_rate, u32 in_lanes, | 
 | 				  u32 out_rate, u32 out_lanes, u32 *new_rate, | 
 | 				  u32 *new_lanes) | 
 | { | 
 | 	static const u32 dp_bw[][2] = { | 
 | 		/* Mb/s, lanes */ | 
 | 		{ 8100, 4 }, /* 25920 Mb/s */ | 
 | 		{ 5400, 4 }, /* 17280 Mb/s */ | 
 | 		{ 8100, 2 }, /* 12960 Mb/s */ | 
 | 		{ 2700, 4 }, /* 8640 Mb/s */ | 
 | 		{ 5400, 2 }, /* 8640 Mb/s */ | 
 | 		{ 8100, 1 }, /* 6480 Mb/s */ | 
 | 		{ 1620, 4 }, /* 5184 Mb/s */ | 
 | 		{ 5400, 1 }, /* 4320 Mb/s */ | 
 | 		{ 2700, 2 }, /* 4320 Mb/s */ | 
 | 		{ 1620, 2 }, /* 2592 Mb/s */ | 
 | 		{ 2700, 1 }, /* 2160 Mb/s */ | 
 | 		{ 1620, 1 }, /* 1296 Mb/s */ | 
 | 	}; | 
 | 	unsigned int i; | 
 |  | 
 | 	/* | 
 | 	 * Find a combination that can fit into max_bw and does not | 
 | 	 * exceed the maximum rate and lanes supported by the DP OUT and | 
 | 	 * DP IN adapters. | 
 | 	 */ | 
 | 	for (i = 0; i < ARRAY_SIZE(dp_bw); i++) { | 
 | 		if (dp_bw[i][0] > out_rate || dp_bw[i][1] > out_lanes) | 
 | 			continue; | 
 |  | 
 | 		if (dp_bw[i][0] > in_rate || dp_bw[i][1] > in_lanes) | 
 | 			continue; | 
 |  | 
 | 		if (tb_dp_bandwidth(dp_bw[i][0], dp_bw[i][1]) <= max_bw) { | 
 | 			*new_rate = dp_bw[i][0]; | 
 | 			*new_lanes = dp_bw[i][1]; | 
 | 			return 0; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	return -ENOSR; | 
 | } | 
 |  | 
 | static int tb_dp_xchg_caps(struct tb_tunnel *tunnel) | 
 | { | 
 | 	u32 out_dp_cap, out_rate, out_lanes, in_dp_cap, in_rate, in_lanes, bw; | 
 | 	struct tb_port *out = tunnel->dst_port; | 
 | 	struct tb_port *in = tunnel->src_port; | 
 | 	int ret, max_bw; | 
 |  | 
 | 	/* | 
 | 	 * Copy DP_LOCAL_CAP register to DP_REMOTE_CAP register for | 
 | 	 * newer generation hardware. | 
 | 	 */ | 
 | 	if (in->sw->generation < 2 || out->sw->generation < 2) | 
 | 		return 0; | 
 |  | 
 | 	/* | 
 | 	 * Perform connection manager handshake between IN and OUT ports | 
 | 	 * before capabilities exchange can take place. | 
 | 	 */ | 
 | 	ret = tb_dp_cm_handshake(in, out, 3000); | 
 | 	if (ret) | 
 | 		return ret; | 
 |  | 
 | 	/* Read both DP_LOCAL_CAP registers */ | 
 | 	ret = tb_port_read(in, &in_dp_cap, TB_CFG_PORT, | 
 | 			   in->cap_adap + DP_LOCAL_CAP, 1); | 
 | 	if (ret) | 
 | 		return ret; | 
 |  | 
 | 	ret = tb_port_read(out, &out_dp_cap, TB_CFG_PORT, | 
 | 			   out->cap_adap + DP_LOCAL_CAP, 1); | 
 | 	if (ret) | 
 | 		return ret; | 
 |  | 
 | 	/* Write IN local caps to OUT remote caps */ | 
 | 	ret = tb_port_write(out, &in_dp_cap, TB_CFG_PORT, | 
 | 			    out->cap_adap + DP_REMOTE_CAP, 1); | 
 | 	if (ret) | 
 | 		return ret; | 
 |  | 
 | 	in_rate = tb_dp_cap_get_rate(in_dp_cap); | 
 | 	in_lanes = tb_dp_cap_get_lanes(in_dp_cap); | 
 | 	tb_tunnel_dbg(tunnel, | 
 | 		      "DP IN maximum supported bandwidth %u Mb/s x%u = %u Mb/s\n", | 
 | 		      in_rate, in_lanes, tb_dp_bandwidth(in_rate, in_lanes)); | 
 |  | 
 | 	/* | 
 | 	 * If the tunnel bandwidth is limited (max_bw is set) then see | 
 | 	 * if we need to reduce bandwidth to fit there. | 
 | 	 */ | 
 | 	out_rate = tb_dp_cap_get_rate(out_dp_cap); | 
 | 	out_lanes = tb_dp_cap_get_lanes(out_dp_cap); | 
 | 	bw = tb_dp_bandwidth(out_rate, out_lanes); | 
 | 	tb_tunnel_dbg(tunnel, | 
 | 		      "DP OUT maximum supported bandwidth %u Mb/s x%u = %u Mb/s\n", | 
 | 		      out_rate, out_lanes, bw); | 
 |  | 
 | 	if (tb_tunnel_direction_downstream(tunnel)) | 
 | 		max_bw = tunnel->max_down; | 
 | 	else | 
 | 		max_bw = tunnel->max_up; | 
 |  | 
 | 	if (max_bw && bw > max_bw) { | 
 | 		u32 new_rate, new_lanes, new_bw; | 
 |  | 
 | 		ret = tb_dp_reduce_bandwidth(max_bw, in_rate, in_lanes, | 
 | 					     out_rate, out_lanes, &new_rate, | 
 | 					     &new_lanes); | 
 | 		if (ret) { | 
 | 			tb_tunnel_info(tunnel, "not enough bandwidth\n"); | 
 | 			return ret; | 
 | 		} | 
 |  | 
 | 		new_bw = tb_dp_bandwidth(new_rate, new_lanes); | 
 | 		tb_tunnel_dbg(tunnel, | 
 | 			      "bandwidth reduced to %u Mb/s x%u = %u Mb/s\n", | 
 | 			      new_rate, new_lanes, new_bw); | 
 |  | 
 | 		/* | 
 | 		 * Set new rate and number of lanes before writing it to | 
 | 		 * the IN port remote caps. | 
 | 		 */ | 
 | 		out_dp_cap = tb_dp_cap_set_rate(out_dp_cap, new_rate); | 
 | 		out_dp_cap = tb_dp_cap_set_lanes(out_dp_cap, new_lanes); | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * Titan Ridge does not disable AUX timers when it gets | 
 | 	 * SET_CONFIG with SET_LTTPR_MODE set. This causes problems with | 
 | 	 * DP tunneling. | 
 | 	 */ | 
 | 	if (tb_route(out->sw) && tb_switch_is_titan_ridge(out->sw)) { | 
 | 		out_dp_cap |= DP_COMMON_CAP_LTTPR_NS; | 
 | 		tb_tunnel_dbg(tunnel, "disabling LTTPR\n"); | 
 | 	} | 
 |  | 
 | 	return tb_port_write(in, &out_dp_cap, TB_CFG_PORT, | 
 | 			     in->cap_adap + DP_REMOTE_CAP, 1); | 
 | } | 
 |  | 
 | static int tb_dp_bandwidth_alloc_mode_enable(struct tb_tunnel *tunnel) | 
 | { | 
 | 	int ret, estimated_bw, granularity, tmp; | 
 | 	struct tb_port *out = tunnel->dst_port; | 
 | 	struct tb_port *in = tunnel->src_port; | 
 | 	u32 out_dp_cap, out_rate, out_lanes; | 
 | 	u32 in_dp_cap, in_rate, in_lanes; | 
 | 	u32 rate, lanes; | 
 |  | 
 | 	if (!bw_alloc_mode) | 
 | 		return 0; | 
 |  | 
 | 	ret = usb4_dp_port_set_cm_bandwidth_mode_supported(in, true); | 
 | 	if (ret) | 
 | 		return ret; | 
 |  | 
 | 	ret = usb4_dp_port_set_group_id(in, in->group->index); | 
 | 	if (ret) | 
 | 		return ret; | 
 |  | 
 | 	/* | 
 | 	 * Get the non-reduced rate and lanes based on the lowest | 
 | 	 * capability of both adapters. | 
 | 	 */ | 
 | 	ret = tb_port_read(in, &in_dp_cap, TB_CFG_PORT, | 
 | 			   in->cap_adap + DP_LOCAL_CAP, 1); | 
 | 	if (ret) | 
 | 		return ret; | 
 |  | 
 | 	ret = tb_port_read(out, &out_dp_cap, TB_CFG_PORT, | 
 | 			   out->cap_adap + DP_LOCAL_CAP, 1); | 
 | 	if (ret) | 
 | 		return ret; | 
 |  | 
 | 	in_rate = tb_dp_cap_get_rate(in_dp_cap); | 
 | 	in_lanes = tb_dp_cap_get_lanes(in_dp_cap); | 
 | 	out_rate = tb_dp_cap_get_rate(out_dp_cap); | 
 | 	out_lanes = tb_dp_cap_get_lanes(out_dp_cap); | 
 |  | 
 | 	rate = min(in_rate, out_rate); | 
 | 	lanes = min(in_lanes, out_lanes); | 
 | 	tmp = tb_dp_bandwidth(rate, lanes); | 
 |  | 
 | 	tb_tunnel_dbg(tunnel, "non-reduced bandwidth %u Mb/s x%u = %u Mb/s\n", | 
 | 		      rate, lanes, tmp); | 
 |  | 
 | 	ret = usb4_dp_port_set_nrd(in, rate, lanes); | 
 | 	if (ret) | 
 | 		return ret; | 
 |  | 
 | 	/* | 
 | 	 * Pick up granularity that supports maximum possible bandwidth. | 
 | 	 * For that we use the UHBR rates too. | 
 | 	 */ | 
 | 	in_rate = tb_dp_cap_get_rate_ext(in_dp_cap); | 
 | 	out_rate = tb_dp_cap_get_rate_ext(out_dp_cap); | 
 | 	rate = min(in_rate, out_rate); | 
 | 	tmp = tb_dp_bandwidth(rate, lanes); | 
 |  | 
 | 	tb_tunnel_dbg(tunnel, | 
 | 		      "maximum bandwidth through allocation mode %u Mb/s x%u = %u Mb/s\n", | 
 | 		      rate, lanes, tmp); | 
 |  | 
 | 	for (granularity = 250; tmp / granularity > 255 && granularity <= 1000; | 
 | 	     granularity *= 2) | 
 | 		; | 
 |  | 
 | 	tb_tunnel_dbg(tunnel, "granularity %d Mb/s\n", granularity); | 
 |  | 
 | 	/* | 
 | 	 * Returns -EINVAL if granularity above is outside of the | 
 | 	 * accepted ranges. | 
 | 	 */ | 
 | 	ret = usb4_dp_port_set_granularity(in, granularity); | 
 | 	if (ret) | 
 | 		return ret; | 
 |  | 
 | 	/* | 
 | 	 * Bandwidth estimation is pretty much what we have in | 
 | 	 * max_up/down fields. For discovery we just read what the | 
 | 	 * estimation was set to. | 
 | 	 */ | 
 | 	if (tb_tunnel_direction_downstream(tunnel)) | 
 | 		estimated_bw = tunnel->max_down; | 
 | 	else | 
 | 		estimated_bw = tunnel->max_up; | 
 |  | 
 | 	tb_tunnel_dbg(tunnel, "estimated bandwidth %d Mb/s\n", estimated_bw); | 
 |  | 
 | 	ret = usb4_dp_port_set_estimated_bandwidth(in, estimated_bw); | 
 | 	if (ret) | 
 | 		return ret; | 
 |  | 
 | 	/* Initial allocation should be 0 according the spec */ | 
 | 	ret = usb4_dp_port_allocate_bandwidth(in, 0); | 
 | 	if (ret) | 
 | 		return ret; | 
 |  | 
 | 	tb_tunnel_dbg(tunnel, "bandwidth allocation mode enabled\n"); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int tb_dp_init(struct tb_tunnel *tunnel) | 
 | { | 
 | 	struct tb_port *in = tunnel->src_port; | 
 | 	struct tb_switch *sw = in->sw; | 
 | 	struct tb *tb = in->sw->tb; | 
 | 	int ret; | 
 |  | 
 | 	ret = tb_dp_xchg_caps(tunnel); | 
 | 	if (ret) | 
 | 		return ret; | 
 |  | 
 | 	if (!tb_switch_is_usb4(sw)) | 
 | 		return 0; | 
 |  | 
 | 	if (!usb4_dp_port_bandwidth_mode_supported(in)) | 
 | 		return 0; | 
 |  | 
 | 	tb_tunnel_dbg(tunnel, "bandwidth allocation mode supported\n"); | 
 |  | 
 | 	ret = usb4_dp_port_set_cm_id(in, tb->index); | 
 | 	if (ret) | 
 | 		return ret; | 
 |  | 
 | 	return tb_dp_bandwidth_alloc_mode_enable(tunnel); | 
 | } | 
 |  | 
 | static void tb_dp_deinit(struct tb_tunnel *tunnel) | 
 | { | 
 | 	struct tb_port *in = tunnel->src_port; | 
 |  | 
 | 	if (!usb4_dp_port_bandwidth_mode_supported(in)) | 
 | 		return; | 
 | 	if (usb4_dp_port_bandwidth_mode_enabled(in)) { | 
 | 		usb4_dp_port_set_cm_bandwidth_mode_supported(in, false); | 
 | 		tb_tunnel_dbg(tunnel, "bandwidth allocation mode disabled\n"); | 
 | 	} | 
 | } | 
 |  | 
 | static int tb_dp_activate(struct tb_tunnel *tunnel, bool active) | 
 | { | 
 | 	int ret; | 
 |  | 
 | 	if (active) { | 
 | 		struct tb_path **paths; | 
 | 		int last; | 
 |  | 
 | 		paths = tunnel->paths; | 
 | 		last = paths[TB_DP_VIDEO_PATH_OUT]->path_length - 1; | 
 |  | 
 | 		tb_dp_port_set_hops(tunnel->src_port, | 
 | 			paths[TB_DP_VIDEO_PATH_OUT]->hops[0].in_hop_index, | 
 | 			paths[TB_DP_AUX_PATH_OUT]->hops[0].in_hop_index, | 
 | 			paths[TB_DP_AUX_PATH_IN]->hops[last].next_hop_index); | 
 |  | 
 | 		tb_dp_port_set_hops(tunnel->dst_port, | 
 | 			paths[TB_DP_VIDEO_PATH_OUT]->hops[last].next_hop_index, | 
 | 			paths[TB_DP_AUX_PATH_IN]->hops[0].in_hop_index, | 
 | 			paths[TB_DP_AUX_PATH_OUT]->hops[last].next_hop_index); | 
 | 	} else { | 
 | 		tb_dp_port_hpd_clear(tunnel->src_port); | 
 | 		tb_dp_port_set_hops(tunnel->src_port, 0, 0, 0); | 
 | 		if (tb_port_is_dpout(tunnel->dst_port)) | 
 | 			tb_dp_port_set_hops(tunnel->dst_port, 0, 0, 0); | 
 | 	} | 
 |  | 
 | 	ret = tb_dp_port_enable(tunnel->src_port, active); | 
 | 	if (ret) | 
 | 		return ret; | 
 |  | 
 | 	if (tb_port_is_dpout(tunnel->dst_port)) | 
 | 		return tb_dp_port_enable(tunnel->dst_port, active); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | /** | 
 |  * tb_dp_bandwidth_mode_maximum_bandwidth() - Maximum possible bandwidth | 
 |  * @tunnel: DP tunnel to check | 
 |  * @max_bw_rounded: Maximum bandwidth in Mb/s rounded up to the next granularity | 
 |  * | 
 |  * Returns maximum possible bandwidth for this tunnel in Mb/s. | 
 |  */ | 
 | static int tb_dp_bandwidth_mode_maximum_bandwidth(struct tb_tunnel *tunnel, | 
 | 						  int *max_bw_rounded) | 
 | { | 
 | 	struct tb_port *in = tunnel->src_port; | 
 | 	int ret, rate, lanes, max_bw; | 
 | 	u32 cap; | 
 |  | 
 | 	/* | 
 | 	 * DP IN adapter DP_LOCAL_CAP gets updated to the lowest AUX | 
 | 	 * read parameter values so this so we can use this to determine | 
 | 	 * the maximum possible bandwidth over this link. | 
 | 	 * | 
 | 	 * See USB4 v2 spec 1.0 10.4.4.5. | 
 | 	 */ | 
 | 	ret = tb_port_read(in, &cap, TB_CFG_PORT, | 
 | 			   in->cap_adap + DP_LOCAL_CAP, 1); | 
 | 	if (ret) | 
 | 		return ret; | 
 |  | 
 | 	rate = tb_dp_cap_get_rate_ext(cap); | 
 | 	lanes = tb_dp_cap_get_lanes(cap); | 
 |  | 
 | 	max_bw = tb_dp_bandwidth(rate, lanes); | 
 |  | 
 | 	if (max_bw_rounded) { | 
 | 		ret = usb4_dp_port_granularity(in); | 
 | 		if (ret < 0) | 
 | 			return ret; | 
 | 		*max_bw_rounded = roundup(max_bw, ret); | 
 | 	} | 
 |  | 
 | 	return max_bw; | 
 | } | 
 |  | 
 | static int tb_dp_bandwidth_mode_consumed_bandwidth(struct tb_tunnel *tunnel, | 
 | 						   int *consumed_up, | 
 | 						   int *consumed_down) | 
 | { | 
 | 	struct tb_port *in = tunnel->src_port; | 
 | 	int ret, allocated_bw, max_bw_rounded; | 
 |  | 
 | 	if (!usb4_dp_port_bandwidth_mode_enabled(in)) | 
 | 		return -EOPNOTSUPP; | 
 |  | 
 | 	if (!tunnel->bw_mode) | 
 | 		return -EOPNOTSUPP; | 
 |  | 
 | 	/* Read what was allocated previously if any */ | 
 | 	ret = usb4_dp_port_allocated_bandwidth(in); | 
 | 	if (ret < 0) | 
 | 		return ret; | 
 | 	allocated_bw = ret; | 
 |  | 
 | 	ret = tb_dp_bandwidth_mode_maximum_bandwidth(tunnel, &max_bw_rounded); | 
 | 	if (ret < 0) | 
 | 		return ret; | 
 | 	if (allocated_bw == max_bw_rounded) | 
 | 		allocated_bw = ret; | 
 |  | 
 | 	if (tb_tunnel_direction_downstream(tunnel)) { | 
 | 		*consumed_up = 0; | 
 | 		*consumed_down = allocated_bw; | 
 | 	} else { | 
 | 		*consumed_up = allocated_bw; | 
 | 		*consumed_down = 0; | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int tb_dp_allocated_bandwidth(struct tb_tunnel *tunnel, int *allocated_up, | 
 | 				     int *allocated_down) | 
 | { | 
 | 	struct tb_port *in = tunnel->src_port; | 
 |  | 
 | 	/* | 
 | 	 * If we have already set the allocated bandwidth then use that. | 
 | 	 * Otherwise we read it from the DPRX. | 
 | 	 */ | 
 | 	if (usb4_dp_port_bandwidth_mode_enabled(in) && tunnel->bw_mode) { | 
 | 		int ret, allocated_bw, max_bw_rounded; | 
 |  | 
 | 		ret = usb4_dp_port_allocated_bandwidth(in); | 
 | 		if (ret < 0) | 
 | 			return ret; | 
 | 		allocated_bw = ret; | 
 |  | 
 | 		ret = tb_dp_bandwidth_mode_maximum_bandwidth(tunnel, | 
 | 							     &max_bw_rounded); | 
 | 		if (ret < 0) | 
 | 			return ret; | 
 | 		if (allocated_bw == max_bw_rounded) | 
 | 			allocated_bw = ret; | 
 |  | 
 | 		if (tb_tunnel_direction_downstream(tunnel)) { | 
 | 			*allocated_up = 0; | 
 | 			*allocated_down = allocated_bw; | 
 | 		} else { | 
 | 			*allocated_up = allocated_bw; | 
 | 			*allocated_down = 0; | 
 | 		} | 
 | 		return 0; | 
 | 	} | 
 |  | 
 | 	return tunnel->consumed_bandwidth(tunnel, allocated_up, | 
 | 					  allocated_down); | 
 | } | 
 |  | 
 | static int tb_dp_alloc_bandwidth(struct tb_tunnel *tunnel, int *alloc_up, | 
 | 				 int *alloc_down) | 
 | { | 
 | 	struct tb_port *in = tunnel->src_port; | 
 | 	int max_bw_rounded, ret, tmp; | 
 |  | 
 | 	if (!usb4_dp_port_bandwidth_mode_enabled(in)) | 
 | 		return -EOPNOTSUPP; | 
 |  | 
 | 	ret = tb_dp_bandwidth_mode_maximum_bandwidth(tunnel, &max_bw_rounded); | 
 | 	if (ret < 0) | 
 | 		return ret; | 
 |  | 
 | 	if (tb_tunnel_direction_downstream(tunnel)) { | 
 | 		tmp = min(*alloc_down, max_bw_rounded); | 
 | 		ret = usb4_dp_port_allocate_bandwidth(in, tmp); | 
 | 		if (ret) | 
 | 			return ret; | 
 | 		*alloc_down = tmp; | 
 | 		*alloc_up = 0; | 
 | 	} else { | 
 | 		tmp = min(*alloc_up, max_bw_rounded); | 
 | 		ret = usb4_dp_port_allocate_bandwidth(in, tmp); | 
 | 		if (ret) | 
 | 			return ret; | 
 | 		*alloc_down = 0; | 
 | 		*alloc_up = tmp; | 
 | 	} | 
 |  | 
 | 	/* Now we can use BW mode registers to figure out the bandwidth */ | 
 | 	/* TODO: need to handle discovery too */ | 
 | 	tunnel->bw_mode = true; | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int tb_dp_wait_dprx(struct tb_tunnel *tunnel, int timeout_msec) | 
 | { | 
 | 	ktime_t timeout = ktime_add_ms(ktime_get(), timeout_msec); | 
 | 	struct tb_port *in = tunnel->src_port; | 
 |  | 
 | 	/* | 
 | 	 * Wait for DPRX done. Normally it should be already set for | 
 | 	 * active tunnel. | 
 | 	 */ | 
 | 	do { | 
 | 		u32 val; | 
 | 		int ret; | 
 |  | 
 | 		ret = tb_port_read(in, &val, TB_CFG_PORT, | 
 | 				   in->cap_adap + DP_COMMON_CAP, 1); | 
 | 		if (ret) | 
 | 			return ret; | 
 |  | 
 | 		if (val & DP_COMMON_CAP_DPRX_DONE) { | 
 | 			tb_tunnel_dbg(tunnel, "DPRX read done\n"); | 
 | 			return 0; | 
 | 		} | 
 | 		usleep_range(100, 150); | 
 | 	} while (ktime_before(ktime_get(), timeout)); | 
 |  | 
 | 	tb_tunnel_dbg(tunnel, "DPRX read timeout\n"); | 
 | 	return -ETIMEDOUT; | 
 | } | 
 |  | 
 | /* Read cap from tunnel DP IN */ | 
 | static int tb_dp_read_cap(struct tb_tunnel *tunnel, unsigned int cap, u32 *rate, | 
 | 			  u32 *lanes) | 
 | { | 
 | 	struct tb_port *in = tunnel->src_port; | 
 | 	u32 val; | 
 | 	int ret; | 
 |  | 
 | 	switch (cap) { | 
 | 	case DP_LOCAL_CAP: | 
 | 	case DP_REMOTE_CAP: | 
 | 	case DP_COMMON_CAP: | 
 | 		break; | 
 |  | 
 | 	default: | 
 | 		tb_tunnel_WARN(tunnel, "invalid capability index %#x\n", cap); | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * Read from the copied remote cap so that we take into account | 
 | 	 * if capabilities were reduced during exchange. | 
 | 	 */ | 
 | 	ret = tb_port_read(in, &val, TB_CFG_PORT, in->cap_adap + cap, 1); | 
 | 	if (ret) | 
 | 		return ret; | 
 |  | 
 | 	*rate = tb_dp_cap_get_rate(val); | 
 | 	*lanes = tb_dp_cap_get_lanes(val); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int tb_dp_maximum_bandwidth(struct tb_tunnel *tunnel, int *max_up, | 
 | 				   int *max_down) | 
 | { | 
 | 	int ret; | 
 |  | 
 | 	if (!usb4_dp_port_bandwidth_mode_enabled(tunnel->src_port)) | 
 | 		return -EOPNOTSUPP; | 
 |  | 
 | 	ret = tb_dp_bandwidth_mode_maximum_bandwidth(tunnel, NULL); | 
 | 	if (ret < 0) | 
 | 		return ret; | 
 |  | 
 | 	if (tb_tunnel_direction_downstream(tunnel)) { | 
 | 		*max_up = 0; | 
 | 		*max_down = ret; | 
 | 	} else { | 
 | 		*max_up = ret; | 
 | 		*max_down = 0; | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int tb_dp_consumed_bandwidth(struct tb_tunnel *tunnel, int *consumed_up, | 
 | 				    int *consumed_down) | 
 | { | 
 | 	const struct tb_switch *sw = tunnel->src_port->sw; | 
 | 	u32 rate = 0, lanes = 0; | 
 | 	int ret; | 
 |  | 
 | 	if (tb_dp_is_usb4(sw)) { | 
 | 		/* | 
 | 		 * On USB4 routers check if the bandwidth allocation | 
 | 		 * mode is enabled first and then read the bandwidth | 
 | 		 * through those registers. | 
 | 		 */ | 
 | 		ret = tb_dp_bandwidth_mode_consumed_bandwidth(tunnel, consumed_up, | 
 | 							      consumed_down); | 
 | 		if (ret < 0) { | 
 | 			if (ret != -EOPNOTSUPP) | 
 | 				return ret; | 
 | 		} else if (!ret) { | 
 | 			return 0; | 
 | 		} | 
 | 		/* | 
 | 		 * Then see if the DPRX negotiation is ready and if yes | 
 | 		 * return that bandwidth (it may be smaller than the | 
 | 		 * reduced one). According to VESA spec, the DPRX | 
 | 		 * negotiation shall compete in 5 seconds after tunnel | 
 | 		 * established. We give it 100ms extra just in case. | 
 | 		 */ | 
 | 		ret = tb_dp_wait_dprx(tunnel, 5100); | 
 | 		if (ret) | 
 | 			return ret; | 
 | 		ret = tb_dp_read_cap(tunnel, DP_COMMON_CAP, &rate, &lanes); | 
 | 		if (ret) | 
 | 			return ret; | 
 | 	} else if (sw->generation >= 2) { | 
 | 		ret = tb_dp_read_cap(tunnel, DP_REMOTE_CAP, &rate, &lanes); | 
 | 		if (ret) | 
 | 			return ret; | 
 | 	} else { | 
 | 		/* No bandwidth management for legacy devices  */ | 
 | 		*consumed_up = 0; | 
 | 		*consumed_down = 0; | 
 | 		return 0; | 
 | 	} | 
 |  | 
 | 	if (tb_tunnel_direction_downstream(tunnel)) { | 
 | 		*consumed_up = 0; | 
 | 		*consumed_down = tb_dp_bandwidth(rate, lanes); | 
 | 	} else { | 
 | 		*consumed_up = tb_dp_bandwidth(rate, lanes); | 
 | 		*consumed_down = 0; | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void tb_dp_init_aux_credits(struct tb_path_hop *hop) | 
 | { | 
 | 	struct tb_port *port = hop->in_port; | 
 | 	struct tb_switch *sw = port->sw; | 
 |  | 
 | 	if (tb_port_use_credit_allocation(port)) | 
 | 		hop->initial_credits = sw->min_dp_aux_credits; | 
 | 	else | 
 | 		hop->initial_credits = 1; | 
 | } | 
 |  | 
 | static void tb_dp_init_aux_path(struct tb_path *path, bool pm_support) | 
 | { | 
 | 	struct tb_path_hop *hop; | 
 |  | 
 | 	path->egress_fc_enable = TB_PATH_SOURCE | TB_PATH_INTERNAL; | 
 | 	path->egress_shared_buffer = TB_PATH_NONE; | 
 | 	path->ingress_fc_enable = TB_PATH_ALL; | 
 | 	path->ingress_shared_buffer = TB_PATH_NONE; | 
 | 	path->priority = TB_DP_AUX_PRIORITY; | 
 | 	path->weight = TB_DP_AUX_WEIGHT; | 
 |  | 
 | 	tb_path_for_each_hop(path, hop) { | 
 | 		tb_dp_init_aux_credits(hop); | 
 | 		if (pm_support) | 
 | 			tb_init_pm_support(hop); | 
 | 	} | 
 | } | 
 |  | 
 | static int tb_dp_init_video_credits(struct tb_path_hop *hop) | 
 | { | 
 | 	struct tb_port *port = hop->in_port; | 
 | 	struct tb_switch *sw = port->sw; | 
 |  | 
 | 	if (tb_port_use_credit_allocation(port)) { | 
 | 		unsigned int nfc_credits; | 
 | 		size_t max_dp_streams; | 
 |  | 
 | 		tb_available_credits(port, &max_dp_streams); | 
 | 		/* | 
 | 		 * Read the number of currently allocated NFC credits | 
 | 		 * from the lane adapter. Since we only use them for DP | 
 | 		 * tunneling we can use that to figure out how many DP | 
 | 		 * tunnels already go through the lane adapter. | 
 | 		 */ | 
 | 		nfc_credits = port->config.nfc_credits & | 
 | 				ADP_CS_4_NFC_BUFFERS_MASK; | 
 | 		if (nfc_credits / sw->min_dp_main_credits > max_dp_streams) | 
 | 			return -ENOSPC; | 
 |  | 
 | 		hop->nfc_credits = sw->min_dp_main_credits; | 
 | 	} else { | 
 | 		hop->nfc_credits = min(port->total_credits - 2, 12U); | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int tb_dp_init_video_path(struct tb_path *path, bool pm_support) | 
 | { | 
 | 	struct tb_path_hop *hop; | 
 |  | 
 | 	path->egress_fc_enable = TB_PATH_NONE; | 
 | 	path->egress_shared_buffer = TB_PATH_NONE; | 
 | 	path->ingress_fc_enable = TB_PATH_NONE; | 
 | 	path->ingress_shared_buffer = TB_PATH_NONE; | 
 | 	path->priority = TB_DP_VIDEO_PRIORITY; | 
 | 	path->weight = TB_DP_VIDEO_WEIGHT; | 
 |  | 
 | 	tb_path_for_each_hop(path, hop) { | 
 | 		int ret; | 
 |  | 
 | 		ret = tb_dp_init_video_credits(hop); | 
 | 		if (ret) | 
 | 			return ret; | 
 | 		if (pm_support) | 
 | 			tb_init_pm_support(hop); | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void tb_dp_dump(struct tb_tunnel *tunnel) | 
 | { | 
 | 	struct tb_port *in, *out; | 
 | 	u32 dp_cap, rate, lanes; | 
 |  | 
 | 	in = tunnel->src_port; | 
 | 	out = tunnel->dst_port; | 
 |  | 
 | 	if (tb_port_read(in, &dp_cap, TB_CFG_PORT, | 
 | 			 in->cap_adap + DP_LOCAL_CAP, 1)) | 
 | 		return; | 
 |  | 
 | 	rate = tb_dp_cap_get_rate(dp_cap); | 
 | 	lanes = tb_dp_cap_get_lanes(dp_cap); | 
 |  | 
 | 	tb_tunnel_dbg(tunnel, | 
 | 		      "DP IN maximum supported bandwidth %u Mb/s x%u = %u Mb/s\n", | 
 | 		      rate, lanes, tb_dp_bandwidth(rate, lanes)); | 
 |  | 
 | 	if (tb_port_read(out, &dp_cap, TB_CFG_PORT, | 
 | 			 out->cap_adap + DP_LOCAL_CAP, 1)) | 
 | 		return; | 
 |  | 
 | 	rate = tb_dp_cap_get_rate(dp_cap); | 
 | 	lanes = tb_dp_cap_get_lanes(dp_cap); | 
 |  | 
 | 	tb_tunnel_dbg(tunnel, | 
 | 		      "DP OUT maximum supported bandwidth %u Mb/s x%u = %u Mb/s\n", | 
 | 		      rate, lanes, tb_dp_bandwidth(rate, lanes)); | 
 |  | 
 | 	if (tb_port_read(in, &dp_cap, TB_CFG_PORT, | 
 | 			 in->cap_adap + DP_REMOTE_CAP, 1)) | 
 | 		return; | 
 |  | 
 | 	rate = tb_dp_cap_get_rate(dp_cap); | 
 | 	lanes = tb_dp_cap_get_lanes(dp_cap); | 
 |  | 
 | 	tb_tunnel_dbg(tunnel, "reduced bandwidth %u Mb/s x%u = %u Mb/s\n", | 
 | 		      rate, lanes, tb_dp_bandwidth(rate, lanes)); | 
 | } | 
 |  | 
 | /** | 
 |  * tb_tunnel_discover_dp() - Discover existing Display Port tunnels | 
 |  * @tb: Pointer to the domain structure | 
 |  * @in: DP in adapter | 
 |  * @alloc_hopid: Allocate HopIDs from visited ports | 
 |  * | 
 |  * If @in adapter is active, follows the tunnel to the DP out adapter | 
 |  * and back. Returns the discovered tunnel or %NULL if there was no | 
 |  * tunnel. | 
 |  * | 
 |  * Return: DP tunnel or %NULL if no tunnel found. | 
 |  */ | 
 | struct tb_tunnel *tb_tunnel_discover_dp(struct tb *tb, struct tb_port *in, | 
 | 					bool alloc_hopid) | 
 | { | 
 | 	struct tb_tunnel *tunnel; | 
 | 	struct tb_port *port; | 
 | 	struct tb_path *path; | 
 |  | 
 | 	if (!tb_dp_port_is_enabled(in)) | 
 | 		return NULL; | 
 |  | 
 | 	tunnel = tb_tunnel_alloc(tb, 3, TB_TUNNEL_DP); | 
 | 	if (!tunnel) | 
 | 		return NULL; | 
 |  | 
 | 	tunnel->init = tb_dp_init; | 
 | 	tunnel->deinit = tb_dp_deinit; | 
 | 	tunnel->activate = tb_dp_activate; | 
 | 	tunnel->maximum_bandwidth = tb_dp_maximum_bandwidth; | 
 | 	tunnel->allocated_bandwidth = tb_dp_allocated_bandwidth; | 
 | 	tunnel->alloc_bandwidth = tb_dp_alloc_bandwidth; | 
 | 	tunnel->consumed_bandwidth = tb_dp_consumed_bandwidth; | 
 | 	tunnel->src_port = in; | 
 |  | 
 | 	path = tb_path_discover(in, TB_DP_VIDEO_HOPID, NULL, -1, | 
 | 				&tunnel->dst_port, "Video", alloc_hopid); | 
 | 	if (!path) { | 
 | 		/* Just disable the DP IN port */ | 
 | 		tb_dp_port_enable(in, false); | 
 | 		goto err_free; | 
 | 	} | 
 | 	tunnel->paths[TB_DP_VIDEO_PATH_OUT] = path; | 
 | 	if (tb_dp_init_video_path(tunnel->paths[TB_DP_VIDEO_PATH_OUT], false)) | 
 | 		goto err_free; | 
 |  | 
 | 	path = tb_path_discover(in, TB_DP_AUX_TX_HOPID, NULL, -1, NULL, "AUX TX", | 
 | 				alloc_hopid); | 
 | 	if (!path) | 
 | 		goto err_deactivate; | 
 | 	tunnel->paths[TB_DP_AUX_PATH_OUT] = path; | 
 | 	tb_dp_init_aux_path(tunnel->paths[TB_DP_AUX_PATH_OUT], false); | 
 |  | 
 | 	path = tb_path_discover(tunnel->dst_port, -1, in, TB_DP_AUX_RX_HOPID, | 
 | 				&port, "AUX RX", alloc_hopid); | 
 | 	if (!path) | 
 | 		goto err_deactivate; | 
 | 	tunnel->paths[TB_DP_AUX_PATH_IN] = path; | 
 | 	tb_dp_init_aux_path(tunnel->paths[TB_DP_AUX_PATH_IN], false); | 
 |  | 
 | 	/* Validate that the tunnel is complete */ | 
 | 	if (!tb_port_is_dpout(tunnel->dst_port)) { | 
 | 		tb_port_warn(in, "path does not end on a DP adapter, cleaning up\n"); | 
 | 		goto err_deactivate; | 
 | 	} | 
 |  | 
 | 	if (!tb_dp_port_is_enabled(tunnel->dst_port)) | 
 | 		goto err_deactivate; | 
 |  | 
 | 	if (!tb_dp_port_hpd_is_active(tunnel->dst_port)) | 
 | 		goto err_deactivate; | 
 |  | 
 | 	if (port != tunnel->src_port) { | 
 | 		tb_tunnel_warn(tunnel, "path is not complete, cleaning up\n"); | 
 | 		goto err_deactivate; | 
 | 	} | 
 |  | 
 | 	tb_dp_dump(tunnel); | 
 |  | 
 | 	tb_tunnel_dbg(tunnel, "discovered\n"); | 
 | 	return tunnel; | 
 |  | 
 | err_deactivate: | 
 | 	tb_tunnel_deactivate(tunnel); | 
 | err_free: | 
 | 	tb_tunnel_free(tunnel); | 
 |  | 
 | 	return NULL; | 
 | } | 
 |  | 
 | /** | 
 |  * tb_tunnel_alloc_dp() - allocate a Display Port tunnel | 
 |  * @tb: Pointer to the domain structure | 
 |  * @in: DP in adapter port | 
 |  * @out: DP out adapter port | 
 |  * @link_nr: Preferred lane adapter when the link is not bonded | 
 |  * @max_up: Maximum available upstream bandwidth for the DP tunnel. | 
 |  *	    %0 if no available bandwidth. | 
 |  * @max_down: Maximum available downstream bandwidth for the DP tunnel. | 
 |  *	      %0 if no available bandwidth. | 
 |  * | 
 |  * Allocates a tunnel between @in and @out that is capable of tunneling | 
 |  * Display Port traffic. | 
 |  * | 
 |  * Return: Returns a tb_tunnel on success or NULL on failure. | 
 |  */ | 
 | struct tb_tunnel *tb_tunnel_alloc_dp(struct tb *tb, struct tb_port *in, | 
 | 				     struct tb_port *out, int link_nr, | 
 | 				     int max_up, int max_down) | 
 | { | 
 | 	struct tb_tunnel *tunnel; | 
 | 	struct tb_path **paths; | 
 | 	struct tb_path *path; | 
 | 	bool pm_support; | 
 |  | 
 | 	if (WARN_ON(!in->cap_adap || !out->cap_adap)) | 
 | 		return NULL; | 
 |  | 
 | 	tunnel = tb_tunnel_alloc(tb, 3, TB_TUNNEL_DP); | 
 | 	if (!tunnel) | 
 | 		return NULL; | 
 |  | 
 | 	tunnel->init = tb_dp_init; | 
 | 	tunnel->deinit = tb_dp_deinit; | 
 | 	tunnel->activate = tb_dp_activate; | 
 | 	tunnel->maximum_bandwidth = tb_dp_maximum_bandwidth; | 
 | 	tunnel->allocated_bandwidth = tb_dp_allocated_bandwidth; | 
 | 	tunnel->alloc_bandwidth = tb_dp_alloc_bandwidth; | 
 | 	tunnel->consumed_bandwidth = tb_dp_consumed_bandwidth; | 
 | 	tunnel->src_port = in; | 
 | 	tunnel->dst_port = out; | 
 | 	tunnel->max_up = max_up; | 
 | 	tunnel->max_down = max_down; | 
 |  | 
 | 	paths = tunnel->paths; | 
 | 	pm_support = usb4_switch_version(in->sw) >= 2; | 
 |  | 
 | 	path = tb_path_alloc(tb, in, TB_DP_VIDEO_HOPID, out, TB_DP_VIDEO_HOPID, | 
 | 			     link_nr, "Video"); | 
 | 	if (!path) | 
 | 		goto err_free; | 
 | 	tb_dp_init_video_path(path, pm_support); | 
 | 	paths[TB_DP_VIDEO_PATH_OUT] = path; | 
 |  | 
 | 	path = tb_path_alloc(tb, in, TB_DP_AUX_TX_HOPID, out, | 
 | 			     TB_DP_AUX_TX_HOPID, link_nr, "AUX TX"); | 
 | 	if (!path) | 
 | 		goto err_free; | 
 | 	tb_dp_init_aux_path(path, pm_support); | 
 | 	paths[TB_DP_AUX_PATH_OUT] = path; | 
 |  | 
 | 	path = tb_path_alloc(tb, out, TB_DP_AUX_RX_HOPID, in, | 
 | 			     TB_DP_AUX_RX_HOPID, link_nr, "AUX RX"); | 
 | 	if (!path) | 
 | 		goto err_free; | 
 | 	tb_dp_init_aux_path(path, pm_support); | 
 | 	paths[TB_DP_AUX_PATH_IN] = path; | 
 |  | 
 | 	return tunnel; | 
 |  | 
 | err_free: | 
 | 	tb_tunnel_free(tunnel); | 
 | 	return NULL; | 
 | } | 
 |  | 
 | static unsigned int tb_dma_available_credits(const struct tb_port *port) | 
 | { | 
 | 	const struct tb_switch *sw = port->sw; | 
 | 	int credits; | 
 |  | 
 | 	credits = tb_available_credits(port, NULL); | 
 | 	if (tb_acpi_may_tunnel_pcie()) | 
 | 		credits -= sw->max_pcie_credits; | 
 | 	credits -= port->dma_credits; | 
 |  | 
 | 	return credits > 0 ? credits : 0; | 
 | } | 
 |  | 
 | static int tb_dma_reserve_credits(struct tb_path_hop *hop, unsigned int credits) | 
 | { | 
 | 	struct tb_port *port = hop->in_port; | 
 |  | 
 | 	if (tb_port_use_credit_allocation(port)) { | 
 | 		unsigned int available = tb_dma_available_credits(port); | 
 |  | 
 | 		/* | 
 | 		 * Need to have at least TB_MIN_DMA_CREDITS, otherwise | 
 | 		 * DMA path cannot be established. | 
 | 		 */ | 
 | 		if (available < TB_MIN_DMA_CREDITS) | 
 | 			return -ENOSPC; | 
 |  | 
 | 		while (credits > available) | 
 | 			credits--; | 
 |  | 
 | 		tb_port_dbg(port, "reserving %u credits for DMA path\n", | 
 | 			    credits); | 
 |  | 
 | 		port->dma_credits += credits; | 
 | 	} else { | 
 | 		if (tb_port_is_null(port)) | 
 | 			credits = port->bonded ? 14 : 6; | 
 | 		else | 
 | 			credits = min(port->total_credits, credits); | 
 | 	} | 
 |  | 
 | 	hop->initial_credits = credits; | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* Path from lane adapter to NHI */ | 
 | static int tb_dma_init_rx_path(struct tb_path *path, unsigned int credits) | 
 | { | 
 | 	struct tb_path_hop *hop; | 
 | 	unsigned int i, tmp; | 
 |  | 
 | 	path->egress_fc_enable = TB_PATH_SOURCE | TB_PATH_INTERNAL; | 
 | 	path->ingress_fc_enable = TB_PATH_ALL; | 
 | 	path->egress_shared_buffer = TB_PATH_NONE; | 
 | 	path->ingress_shared_buffer = TB_PATH_NONE; | 
 | 	path->priority = TB_DMA_PRIORITY; | 
 | 	path->weight = TB_DMA_WEIGHT; | 
 | 	path->clear_fc = true; | 
 |  | 
 | 	/* | 
 | 	 * First lane adapter is the one connected to the remote host. | 
 | 	 * We don't tunnel other traffic over this link so can use all | 
 | 	 * the credits (except the ones reserved for control traffic). | 
 | 	 */ | 
 | 	hop = &path->hops[0]; | 
 | 	tmp = min(tb_usable_credits(hop->in_port), credits); | 
 | 	hop->initial_credits = tmp; | 
 | 	hop->in_port->dma_credits += tmp; | 
 |  | 
 | 	for (i = 1; i < path->path_length; i++) { | 
 | 		int ret; | 
 |  | 
 | 		ret = tb_dma_reserve_credits(&path->hops[i], credits); | 
 | 		if (ret) | 
 | 			return ret; | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* Path from NHI to lane adapter */ | 
 | static int tb_dma_init_tx_path(struct tb_path *path, unsigned int credits) | 
 | { | 
 | 	struct tb_path_hop *hop; | 
 |  | 
 | 	path->egress_fc_enable = TB_PATH_ALL; | 
 | 	path->ingress_fc_enable = TB_PATH_ALL; | 
 | 	path->egress_shared_buffer = TB_PATH_NONE; | 
 | 	path->ingress_shared_buffer = TB_PATH_NONE; | 
 | 	path->priority = TB_DMA_PRIORITY; | 
 | 	path->weight = TB_DMA_WEIGHT; | 
 | 	path->clear_fc = true; | 
 |  | 
 | 	tb_path_for_each_hop(path, hop) { | 
 | 		int ret; | 
 |  | 
 | 		ret = tb_dma_reserve_credits(hop, credits); | 
 | 		if (ret) | 
 | 			return ret; | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void tb_dma_release_credits(struct tb_path_hop *hop) | 
 | { | 
 | 	struct tb_port *port = hop->in_port; | 
 |  | 
 | 	if (tb_port_use_credit_allocation(port)) { | 
 | 		port->dma_credits -= hop->initial_credits; | 
 |  | 
 | 		tb_port_dbg(port, "released %u DMA path credits\n", | 
 | 			    hop->initial_credits); | 
 | 	} | 
 | } | 
 |  | 
 | static void tb_dma_deinit_path(struct tb_path *path) | 
 | { | 
 | 	struct tb_path_hop *hop; | 
 |  | 
 | 	tb_path_for_each_hop(path, hop) | 
 | 		tb_dma_release_credits(hop); | 
 | } | 
 |  | 
 | static void tb_dma_deinit(struct tb_tunnel *tunnel) | 
 | { | 
 | 	int i; | 
 |  | 
 | 	for (i = 0; i < tunnel->npaths; i++) { | 
 | 		if (!tunnel->paths[i]) | 
 | 			continue; | 
 | 		tb_dma_deinit_path(tunnel->paths[i]); | 
 | 	} | 
 | } | 
 |  | 
 | /** | 
 |  * tb_tunnel_alloc_dma() - allocate a DMA tunnel | 
 |  * @tb: Pointer to the domain structure | 
 |  * @nhi: Host controller port | 
 |  * @dst: Destination null port which the other domain is connected to | 
 |  * @transmit_path: HopID used for transmitting packets | 
 |  * @transmit_ring: NHI ring number used to send packets towards the | 
 |  *		   other domain. Set to %-1 if TX path is not needed. | 
 |  * @receive_path: HopID used for receiving packets | 
 |  * @receive_ring: NHI ring number used to receive packets from the | 
 |  *		  other domain. Set to %-1 if RX path is not needed. | 
 |  * | 
 |  * Return: Returns a tb_tunnel on success or NULL on failure. | 
 |  */ | 
 | struct tb_tunnel *tb_tunnel_alloc_dma(struct tb *tb, struct tb_port *nhi, | 
 | 				      struct tb_port *dst, int transmit_path, | 
 | 				      int transmit_ring, int receive_path, | 
 | 				      int receive_ring) | 
 | { | 
 | 	struct tb_tunnel *tunnel; | 
 | 	size_t npaths = 0, i = 0; | 
 | 	struct tb_path *path; | 
 | 	int credits; | 
 |  | 
 | 	/* Ring 0 is reserved for control channel */ | 
 | 	if (WARN_ON(!receive_ring || !transmit_ring)) | 
 | 		return NULL; | 
 |  | 
 | 	if (receive_ring > 0) | 
 | 		npaths++; | 
 | 	if (transmit_ring > 0) | 
 | 		npaths++; | 
 |  | 
 | 	if (WARN_ON(!npaths)) | 
 | 		return NULL; | 
 |  | 
 | 	tunnel = tb_tunnel_alloc(tb, npaths, TB_TUNNEL_DMA); | 
 | 	if (!tunnel) | 
 | 		return NULL; | 
 |  | 
 | 	tunnel->src_port = nhi; | 
 | 	tunnel->dst_port = dst; | 
 | 	tunnel->deinit = tb_dma_deinit; | 
 |  | 
 | 	credits = min_not_zero(dma_credits, nhi->sw->max_dma_credits); | 
 |  | 
 | 	if (receive_ring > 0) { | 
 | 		path = tb_path_alloc(tb, dst, receive_path, nhi, receive_ring, 0, | 
 | 				     "DMA RX"); | 
 | 		if (!path) | 
 | 			goto err_free; | 
 | 		tunnel->paths[i++] = path; | 
 | 		if (tb_dma_init_rx_path(path, credits)) { | 
 | 			tb_tunnel_dbg(tunnel, "not enough buffers for RX path\n"); | 
 | 			goto err_free; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	if (transmit_ring > 0) { | 
 | 		path = tb_path_alloc(tb, nhi, transmit_ring, dst, transmit_path, 0, | 
 | 				     "DMA TX"); | 
 | 		if (!path) | 
 | 			goto err_free; | 
 | 		tunnel->paths[i++] = path; | 
 | 		if (tb_dma_init_tx_path(path, credits)) { | 
 | 			tb_tunnel_dbg(tunnel, "not enough buffers for TX path\n"); | 
 | 			goto err_free; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	return tunnel; | 
 |  | 
 | err_free: | 
 | 	tb_tunnel_free(tunnel); | 
 | 	return NULL; | 
 | } | 
 |  | 
 | /** | 
 |  * tb_tunnel_match_dma() - Match DMA tunnel | 
 |  * @tunnel: Tunnel to match | 
 |  * @transmit_path: HopID used for transmitting packets. Pass %-1 to ignore. | 
 |  * @transmit_ring: NHI ring number used to send packets towards the | 
 |  *		   other domain. Pass %-1 to ignore. | 
 |  * @receive_path: HopID used for receiving packets. Pass %-1 to ignore. | 
 |  * @receive_ring: NHI ring number used to receive packets from the | 
 |  *		  other domain. Pass %-1 to ignore. | 
 |  * | 
 |  * This function can be used to match specific DMA tunnel, if there are | 
 |  * multiple DMA tunnels going through the same XDomain connection. | 
 |  * Returns true if there is match and false otherwise. | 
 |  */ | 
 | bool tb_tunnel_match_dma(const struct tb_tunnel *tunnel, int transmit_path, | 
 | 			 int transmit_ring, int receive_path, int receive_ring) | 
 | { | 
 | 	const struct tb_path *tx_path = NULL, *rx_path = NULL; | 
 | 	int i; | 
 |  | 
 | 	if (!receive_ring || !transmit_ring) | 
 | 		return false; | 
 |  | 
 | 	for (i = 0; i < tunnel->npaths; i++) { | 
 | 		const struct tb_path *path = tunnel->paths[i]; | 
 |  | 
 | 		if (!path) | 
 | 			continue; | 
 |  | 
 | 		if (tb_port_is_nhi(path->hops[0].in_port)) | 
 | 			tx_path = path; | 
 | 		else if (tb_port_is_nhi(path->hops[path->path_length - 1].out_port)) | 
 | 			rx_path = path; | 
 | 	} | 
 |  | 
 | 	if (transmit_ring > 0 || transmit_path > 0) { | 
 | 		if (!tx_path) | 
 | 			return false; | 
 | 		if (transmit_ring > 0 && | 
 | 		    (tx_path->hops[0].in_hop_index != transmit_ring)) | 
 | 			return false; | 
 | 		if (transmit_path > 0 && | 
 | 		    (tx_path->hops[tx_path->path_length - 1].next_hop_index != transmit_path)) | 
 | 			return false; | 
 | 	} | 
 |  | 
 | 	if (receive_ring > 0 || receive_path > 0) { | 
 | 		if (!rx_path) | 
 | 			return false; | 
 | 		if (receive_path > 0 && | 
 | 		    (rx_path->hops[0].in_hop_index != receive_path)) | 
 | 			return false; | 
 | 		if (receive_ring > 0 && | 
 | 		    (rx_path->hops[rx_path->path_length - 1].next_hop_index != receive_ring)) | 
 | 			return false; | 
 | 	} | 
 |  | 
 | 	return true; | 
 | } | 
 |  | 
 | static int tb_usb3_max_link_rate(struct tb_port *up, struct tb_port *down) | 
 | { | 
 | 	int ret, up_max_rate, down_max_rate; | 
 |  | 
 | 	ret = usb4_usb3_port_max_link_rate(up); | 
 | 	if (ret < 0) | 
 | 		return ret; | 
 | 	up_max_rate = ret; | 
 |  | 
 | 	ret = usb4_usb3_port_max_link_rate(down); | 
 | 	if (ret < 0) | 
 | 		return ret; | 
 | 	down_max_rate = ret; | 
 |  | 
 | 	return min(up_max_rate, down_max_rate); | 
 | } | 
 |  | 
 | static int tb_usb3_init(struct tb_tunnel *tunnel) | 
 | { | 
 | 	tb_tunnel_dbg(tunnel, "allocating initial bandwidth %d/%d Mb/s\n", | 
 | 		      tunnel->allocated_up, tunnel->allocated_down); | 
 |  | 
 | 	return usb4_usb3_port_allocate_bandwidth(tunnel->src_port, | 
 | 						 &tunnel->allocated_up, | 
 | 						 &tunnel->allocated_down); | 
 | } | 
 |  | 
 | static int tb_usb3_activate(struct tb_tunnel *tunnel, bool activate) | 
 | { | 
 | 	int res; | 
 |  | 
 | 	res = tb_usb3_port_enable(tunnel->src_port, activate); | 
 | 	if (res) | 
 | 		return res; | 
 |  | 
 | 	if (tb_port_is_usb3_up(tunnel->dst_port)) | 
 | 		return tb_usb3_port_enable(tunnel->dst_port, activate); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int tb_usb3_consumed_bandwidth(struct tb_tunnel *tunnel, | 
 | 		int *consumed_up, int *consumed_down) | 
 | { | 
 | 	struct tb_port *port = tb_upstream_port(tunnel->dst_port->sw); | 
 | 	int pcie_weight = tb_acpi_may_tunnel_pcie() ? TB_PCI_WEIGHT : 0; | 
 |  | 
 | 	/* | 
 | 	 * PCIe tunneling, if enabled, affects the USB3 bandwidth so | 
 | 	 * take that it into account here. | 
 | 	 */ | 
 | 	*consumed_up = tunnel->allocated_up * | 
 | 		(TB_USB3_WEIGHT + pcie_weight) / TB_USB3_WEIGHT; | 
 | 	*consumed_down = tunnel->allocated_down * | 
 | 		(TB_USB3_WEIGHT + pcie_weight) / TB_USB3_WEIGHT; | 
 |  | 
 | 	if (tb_port_get_link_generation(port) >= 4) { | 
 | 		*consumed_up = max(*consumed_up, USB4_V2_USB3_MIN_BANDWIDTH); | 
 | 		*consumed_down = max(*consumed_down, USB4_V2_USB3_MIN_BANDWIDTH); | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int tb_usb3_release_unused_bandwidth(struct tb_tunnel *tunnel) | 
 | { | 
 | 	int ret; | 
 |  | 
 | 	ret = usb4_usb3_port_release_bandwidth(tunnel->src_port, | 
 | 					       &tunnel->allocated_up, | 
 | 					       &tunnel->allocated_down); | 
 | 	if (ret) | 
 | 		return ret; | 
 |  | 
 | 	tb_tunnel_dbg(tunnel, "decreased bandwidth allocation to %d/%d Mb/s\n", | 
 | 		      tunnel->allocated_up, tunnel->allocated_down); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void tb_usb3_reclaim_available_bandwidth(struct tb_tunnel *tunnel, | 
 | 						int *available_up, | 
 | 						int *available_down) | 
 | { | 
 | 	int ret, max_rate, allocate_up, allocate_down; | 
 |  | 
 | 	ret = tb_usb3_max_link_rate(tunnel->dst_port, tunnel->src_port); | 
 | 	if (ret < 0) { | 
 | 		tb_tunnel_warn(tunnel, "failed to read maximum link rate\n"); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * 90% of the max rate can be allocated for isochronous | 
 | 	 * transfers. | 
 | 	 */ | 
 | 	max_rate = ret * 90 / 100; | 
 |  | 
 | 	/* No need to reclaim if already at maximum */ | 
 | 	if (tunnel->allocated_up >= max_rate && | 
 | 	    tunnel->allocated_down >= max_rate) | 
 | 		return; | 
 |  | 
 | 	/* Don't go lower than what is already allocated */ | 
 | 	allocate_up = min(max_rate, *available_up); | 
 | 	if (allocate_up < tunnel->allocated_up) | 
 | 		allocate_up = tunnel->allocated_up; | 
 |  | 
 | 	allocate_down = min(max_rate, *available_down); | 
 | 	if (allocate_down < tunnel->allocated_down) | 
 | 		allocate_down = tunnel->allocated_down; | 
 |  | 
 | 	/* If no changes no need to do more */ | 
 | 	if (allocate_up == tunnel->allocated_up && | 
 | 	    allocate_down == tunnel->allocated_down) | 
 | 		return; | 
 |  | 
 | 	ret = usb4_usb3_port_allocate_bandwidth(tunnel->src_port, &allocate_up, | 
 | 						&allocate_down); | 
 | 	if (ret) { | 
 | 		tb_tunnel_info(tunnel, "failed to allocate bandwidth\n"); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	tunnel->allocated_up = allocate_up; | 
 | 	*available_up -= tunnel->allocated_up; | 
 |  | 
 | 	tunnel->allocated_down = allocate_down; | 
 | 	*available_down -= tunnel->allocated_down; | 
 |  | 
 | 	tb_tunnel_dbg(tunnel, "increased bandwidth allocation to %d/%d Mb/s\n", | 
 | 		      tunnel->allocated_up, tunnel->allocated_down); | 
 | } | 
 |  | 
 | static void tb_usb3_init_credits(struct tb_path_hop *hop) | 
 | { | 
 | 	struct tb_port *port = hop->in_port; | 
 | 	struct tb_switch *sw = port->sw; | 
 | 	unsigned int credits; | 
 |  | 
 | 	if (tb_port_use_credit_allocation(port)) { | 
 | 		credits = sw->max_usb3_credits; | 
 | 	} else { | 
 | 		if (tb_port_is_null(port)) | 
 | 			credits = port->bonded ? 32 : 16; | 
 | 		else | 
 | 			credits = 7; | 
 | 	} | 
 |  | 
 | 	hop->initial_credits = credits; | 
 | } | 
 |  | 
 | static void tb_usb3_init_path(struct tb_path *path) | 
 | { | 
 | 	struct tb_path_hop *hop; | 
 |  | 
 | 	path->egress_fc_enable = TB_PATH_SOURCE | TB_PATH_INTERNAL; | 
 | 	path->egress_shared_buffer = TB_PATH_NONE; | 
 | 	path->ingress_fc_enable = TB_PATH_ALL; | 
 | 	path->ingress_shared_buffer = TB_PATH_NONE; | 
 | 	path->priority = TB_USB3_PRIORITY; | 
 | 	path->weight = TB_USB3_WEIGHT; | 
 | 	path->drop_packages = 0; | 
 |  | 
 | 	tb_path_for_each_hop(path, hop) | 
 | 		tb_usb3_init_credits(hop); | 
 | } | 
 |  | 
 | /** | 
 |  * tb_tunnel_discover_usb3() - Discover existing USB3 tunnels | 
 |  * @tb: Pointer to the domain structure | 
 |  * @down: USB3 downstream adapter | 
 |  * @alloc_hopid: Allocate HopIDs from visited ports | 
 |  * | 
 |  * If @down adapter is active, follows the tunnel to the USB3 upstream | 
 |  * adapter and back. Returns the discovered tunnel or %NULL if there was | 
 |  * no tunnel. | 
 |  */ | 
 | struct tb_tunnel *tb_tunnel_discover_usb3(struct tb *tb, struct tb_port *down, | 
 | 					  bool alloc_hopid) | 
 | { | 
 | 	struct tb_tunnel *tunnel; | 
 | 	struct tb_path *path; | 
 |  | 
 | 	if (!tb_usb3_port_is_enabled(down)) | 
 | 		return NULL; | 
 |  | 
 | 	tunnel = tb_tunnel_alloc(tb, 2, TB_TUNNEL_USB3); | 
 | 	if (!tunnel) | 
 | 		return NULL; | 
 |  | 
 | 	tunnel->activate = tb_usb3_activate; | 
 | 	tunnel->src_port = down; | 
 |  | 
 | 	/* | 
 | 	 * Discover both paths even if they are not complete. We will | 
 | 	 * clean them up by calling tb_tunnel_deactivate() below in that | 
 | 	 * case. | 
 | 	 */ | 
 | 	path = tb_path_discover(down, TB_USB3_HOPID, NULL, -1, | 
 | 				&tunnel->dst_port, "USB3 Down", alloc_hopid); | 
 | 	if (!path) { | 
 | 		/* Just disable the downstream port */ | 
 | 		tb_usb3_port_enable(down, false); | 
 | 		goto err_free; | 
 | 	} | 
 | 	tunnel->paths[TB_USB3_PATH_DOWN] = path; | 
 | 	tb_usb3_init_path(tunnel->paths[TB_USB3_PATH_DOWN]); | 
 |  | 
 | 	path = tb_path_discover(tunnel->dst_port, -1, down, TB_USB3_HOPID, NULL, | 
 | 				"USB3 Up", alloc_hopid); | 
 | 	if (!path) | 
 | 		goto err_deactivate; | 
 | 	tunnel->paths[TB_USB3_PATH_UP] = path; | 
 | 	tb_usb3_init_path(tunnel->paths[TB_USB3_PATH_UP]); | 
 |  | 
 | 	/* Validate that the tunnel is complete */ | 
 | 	if (!tb_port_is_usb3_up(tunnel->dst_port)) { | 
 | 		tb_port_warn(tunnel->dst_port, | 
 | 			     "path does not end on an USB3 adapter, cleaning up\n"); | 
 | 		goto err_deactivate; | 
 | 	} | 
 |  | 
 | 	if (down != tunnel->src_port) { | 
 | 		tb_tunnel_warn(tunnel, "path is not complete, cleaning up\n"); | 
 | 		goto err_deactivate; | 
 | 	} | 
 |  | 
 | 	if (!tb_usb3_port_is_enabled(tunnel->dst_port)) { | 
 | 		tb_tunnel_warn(tunnel, | 
 | 			       "tunnel is not fully activated, cleaning up\n"); | 
 | 		goto err_deactivate; | 
 | 	} | 
 |  | 
 | 	if (!tb_route(down->sw)) { | 
 | 		int ret; | 
 |  | 
 | 		/* | 
 | 		 * Read the initial bandwidth allocation for the first | 
 | 		 * hop tunnel. | 
 | 		 */ | 
 | 		ret = usb4_usb3_port_allocated_bandwidth(down, | 
 | 			&tunnel->allocated_up, &tunnel->allocated_down); | 
 | 		if (ret) | 
 | 			goto err_deactivate; | 
 |  | 
 | 		tb_tunnel_dbg(tunnel, "currently allocated bandwidth %d/%d Mb/s\n", | 
 | 			      tunnel->allocated_up, tunnel->allocated_down); | 
 |  | 
 | 		tunnel->init = tb_usb3_init; | 
 | 		tunnel->consumed_bandwidth = tb_usb3_consumed_bandwidth; | 
 | 		tunnel->release_unused_bandwidth = | 
 | 			tb_usb3_release_unused_bandwidth; | 
 | 		tunnel->reclaim_available_bandwidth = | 
 | 			tb_usb3_reclaim_available_bandwidth; | 
 | 	} | 
 |  | 
 | 	tb_tunnel_dbg(tunnel, "discovered\n"); | 
 | 	return tunnel; | 
 |  | 
 | err_deactivate: | 
 | 	tb_tunnel_deactivate(tunnel); | 
 | err_free: | 
 | 	tb_tunnel_free(tunnel); | 
 |  | 
 | 	return NULL; | 
 | } | 
 |  | 
 | /** | 
 |  * tb_tunnel_alloc_usb3() - allocate a USB3 tunnel | 
 |  * @tb: Pointer to the domain structure | 
 |  * @up: USB3 upstream adapter port | 
 |  * @down: USB3 downstream adapter port | 
 |  * @max_up: Maximum available upstream bandwidth for the USB3 tunnel. | 
 |  *	    %0 if no available bandwidth. | 
 |  * @max_down: Maximum available downstream bandwidth for the USB3 tunnel. | 
 |  *	      %0 if no available bandwidth. | 
 |  * | 
 |  * Allocate an USB3 tunnel. The ports must be of type @TB_TYPE_USB3_UP and | 
 |  * @TB_TYPE_USB3_DOWN. | 
 |  * | 
 |  * Return: Returns a tb_tunnel on success or %NULL on failure. | 
 |  */ | 
 | struct tb_tunnel *tb_tunnel_alloc_usb3(struct tb *tb, struct tb_port *up, | 
 | 				       struct tb_port *down, int max_up, | 
 | 				       int max_down) | 
 | { | 
 | 	struct tb_tunnel *tunnel; | 
 | 	struct tb_path *path; | 
 | 	int max_rate = 0; | 
 |  | 
 | 	if (!tb_route(down->sw) && (max_up > 0 || max_down > 0)) { | 
 | 		/* | 
 | 		 * For USB3 isochronous transfers, we allow bandwidth which is | 
 | 		 * not higher than 90% of maximum supported bandwidth by USB3 | 
 | 		 * adapters. | 
 | 		 */ | 
 | 		max_rate = tb_usb3_max_link_rate(down, up); | 
 | 		if (max_rate < 0) | 
 | 			return NULL; | 
 |  | 
 | 		max_rate = max_rate * 90 / 100; | 
 | 		tb_port_dbg(up, "maximum required bandwidth for USB3 tunnel %d Mb/s\n", | 
 | 			    max_rate); | 
 | 	} | 
 |  | 
 | 	tunnel = tb_tunnel_alloc(tb, 2, TB_TUNNEL_USB3); | 
 | 	if (!tunnel) | 
 | 		return NULL; | 
 |  | 
 | 	tunnel->activate = tb_usb3_activate; | 
 | 	tunnel->src_port = down; | 
 | 	tunnel->dst_port = up; | 
 | 	tunnel->max_up = max_up; | 
 | 	tunnel->max_down = max_down; | 
 |  | 
 | 	path = tb_path_alloc(tb, down, TB_USB3_HOPID, up, TB_USB3_HOPID, 0, | 
 | 			     "USB3 Down"); | 
 | 	if (!path) { | 
 | 		tb_tunnel_free(tunnel); | 
 | 		return NULL; | 
 | 	} | 
 | 	tb_usb3_init_path(path); | 
 | 	tunnel->paths[TB_USB3_PATH_DOWN] = path; | 
 |  | 
 | 	path = tb_path_alloc(tb, up, TB_USB3_HOPID, down, TB_USB3_HOPID, 0, | 
 | 			     "USB3 Up"); | 
 | 	if (!path) { | 
 | 		tb_tunnel_free(tunnel); | 
 | 		return NULL; | 
 | 	} | 
 | 	tb_usb3_init_path(path); | 
 | 	tunnel->paths[TB_USB3_PATH_UP] = path; | 
 |  | 
 | 	if (!tb_route(down->sw)) { | 
 | 		tunnel->allocated_up = min(max_rate, max_up); | 
 | 		tunnel->allocated_down = min(max_rate, max_down); | 
 |  | 
 | 		tunnel->init = tb_usb3_init; | 
 | 		tunnel->consumed_bandwidth = tb_usb3_consumed_bandwidth; | 
 | 		tunnel->release_unused_bandwidth = | 
 | 			tb_usb3_release_unused_bandwidth; | 
 | 		tunnel->reclaim_available_bandwidth = | 
 | 			tb_usb3_reclaim_available_bandwidth; | 
 | 	} | 
 |  | 
 | 	return tunnel; | 
 | } | 
 |  | 
 | /** | 
 |  * tb_tunnel_free() - free a tunnel | 
 |  * @tunnel: Tunnel to be freed | 
 |  * | 
 |  * Frees a tunnel. The tunnel does not need to be deactivated. | 
 |  */ | 
 | void tb_tunnel_free(struct tb_tunnel *tunnel) | 
 | { | 
 | 	int i; | 
 |  | 
 | 	if (!tunnel) | 
 | 		return; | 
 |  | 
 | 	if (tunnel->deinit) | 
 | 		tunnel->deinit(tunnel); | 
 |  | 
 | 	for (i = 0; i < tunnel->npaths; i++) { | 
 | 		if (tunnel->paths[i]) | 
 | 			tb_path_free(tunnel->paths[i]); | 
 | 	} | 
 |  | 
 | 	kfree(tunnel->paths); | 
 | 	kfree(tunnel); | 
 | } | 
 |  | 
 | /** | 
 |  * tb_tunnel_is_invalid - check whether an activated path is still valid | 
 |  * @tunnel: Tunnel to check | 
 |  */ | 
 | bool tb_tunnel_is_invalid(struct tb_tunnel *tunnel) | 
 | { | 
 | 	int i; | 
 |  | 
 | 	for (i = 0; i < tunnel->npaths; i++) { | 
 | 		WARN_ON(!tunnel->paths[i]->activated); | 
 | 		if (tb_path_is_invalid(tunnel->paths[i])) | 
 | 			return true; | 
 | 	} | 
 |  | 
 | 	return false; | 
 | } | 
 |  | 
 | /** | 
 |  * tb_tunnel_restart() - activate a tunnel after a hardware reset | 
 |  * @tunnel: Tunnel to restart | 
 |  * | 
 |  * Return: 0 on success and negative errno in case if failure | 
 |  */ | 
 | int tb_tunnel_restart(struct tb_tunnel *tunnel) | 
 | { | 
 | 	int res, i; | 
 |  | 
 | 	tb_tunnel_dbg(tunnel, "activating\n"); | 
 |  | 
 | 	/* | 
 | 	 * Make sure all paths are properly disabled before enabling | 
 | 	 * them again. | 
 | 	 */ | 
 | 	for (i = 0; i < tunnel->npaths; i++) { | 
 | 		if (tunnel->paths[i]->activated) { | 
 | 			tb_path_deactivate(tunnel->paths[i]); | 
 | 			tunnel->paths[i]->activated = false; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	if (tunnel->init) { | 
 | 		res = tunnel->init(tunnel); | 
 | 		if (res) | 
 | 			return res; | 
 | 	} | 
 |  | 
 | 	for (i = 0; i < tunnel->npaths; i++) { | 
 | 		res = tb_path_activate(tunnel->paths[i]); | 
 | 		if (res) | 
 | 			goto err; | 
 | 	} | 
 |  | 
 | 	if (tunnel->activate) { | 
 | 		res = tunnel->activate(tunnel, true); | 
 | 		if (res) | 
 | 			goto err; | 
 | 	} | 
 |  | 
 | 	return 0; | 
 |  | 
 | err: | 
 | 	tb_tunnel_warn(tunnel, "activation failed\n"); | 
 | 	tb_tunnel_deactivate(tunnel); | 
 | 	return res; | 
 | } | 
 |  | 
 | /** | 
 |  * tb_tunnel_activate() - activate a tunnel | 
 |  * @tunnel: Tunnel to activate | 
 |  * | 
 |  * Return: Returns 0 on success or an error code on failure. | 
 |  */ | 
 | int tb_tunnel_activate(struct tb_tunnel *tunnel) | 
 | { | 
 | 	int i; | 
 |  | 
 | 	for (i = 0; i < tunnel->npaths; i++) { | 
 | 		if (tunnel->paths[i]->activated) { | 
 | 			tb_tunnel_WARN(tunnel, | 
 | 				       "trying to activate an already activated tunnel\n"); | 
 | 			return -EINVAL; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	return tb_tunnel_restart(tunnel); | 
 | } | 
 |  | 
 | /** | 
 |  * tb_tunnel_deactivate() - deactivate a tunnel | 
 |  * @tunnel: Tunnel to deactivate | 
 |  */ | 
 | void tb_tunnel_deactivate(struct tb_tunnel *tunnel) | 
 | { | 
 | 	int i; | 
 |  | 
 | 	tb_tunnel_dbg(tunnel, "deactivating\n"); | 
 |  | 
 | 	if (tunnel->activate) | 
 | 		tunnel->activate(tunnel, false); | 
 |  | 
 | 	for (i = 0; i < tunnel->npaths; i++) { | 
 | 		if (tunnel->paths[i] && tunnel->paths[i]->activated) | 
 | 			tb_path_deactivate(tunnel->paths[i]); | 
 | 	} | 
 | } | 
 |  | 
 | /** | 
 |  * tb_tunnel_port_on_path() - Does the tunnel go through port | 
 |  * @tunnel: Tunnel to check | 
 |  * @port: Port to check | 
 |  * | 
 |  * Returns true if @tunnel goes through @port (direction does not matter), | 
 |  * false otherwise. | 
 |  */ | 
 | bool tb_tunnel_port_on_path(const struct tb_tunnel *tunnel, | 
 | 			    const struct tb_port *port) | 
 | { | 
 | 	int i; | 
 |  | 
 | 	for (i = 0; i < tunnel->npaths; i++) { | 
 | 		if (!tunnel->paths[i]) | 
 | 			continue; | 
 |  | 
 | 		if (tb_path_port_on_path(tunnel->paths[i], port)) | 
 | 			return true; | 
 | 	} | 
 |  | 
 | 	return false; | 
 | } | 
 |  | 
 | static bool tb_tunnel_is_active(const struct tb_tunnel *tunnel) | 
 | { | 
 | 	int i; | 
 |  | 
 | 	for (i = 0; i < tunnel->npaths; i++) { | 
 | 		if (!tunnel->paths[i]) | 
 | 			return false; | 
 | 		if (!tunnel->paths[i]->activated) | 
 | 			return false; | 
 | 	} | 
 |  | 
 | 	return true; | 
 | } | 
 |  | 
 | /** | 
 |  * tb_tunnel_maximum_bandwidth() - Return maximum possible bandwidth | 
 |  * @tunnel: Tunnel to check | 
 |  * @max_up: Maximum upstream bandwidth in Mb/s | 
 |  * @max_down: Maximum downstream bandwidth in Mb/s | 
 |  * | 
 |  * Returns maximum possible bandwidth this tunnel can go if not limited | 
 |  * by other bandwidth clients. If the tunnel does not support this | 
 |  * returns %-EOPNOTSUPP. | 
 |  */ | 
 | int tb_tunnel_maximum_bandwidth(struct tb_tunnel *tunnel, int *max_up, | 
 | 				int *max_down) | 
 | { | 
 | 	if (!tb_tunnel_is_active(tunnel)) | 
 | 		return -EINVAL; | 
 |  | 
 | 	if (tunnel->maximum_bandwidth) | 
 | 		return tunnel->maximum_bandwidth(tunnel, max_up, max_down); | 
 | 	return -EOPNOTSUPP; | 
 | } | 
 |  | 
 | /** | 
 |  * tb_tunnel_allocated_bandwidth() - Return bandwidth allocated for the tunnel | 
 |  * @tunnel: Tunnel to check | 
 |  * @allocated_up: Currently allocated upstream bandwidth in Mb/s is stored here | 
 |  * @allocated_down: Currently allocated downstream bandwidth in Mb/s is | 
 |  *		    stored here | 
 |  * | 
 |  * Returns the bandwidth allocated for the tunnel. This may be higher | 
 |  * than what the tunnel actually consumes. | 
 |  */ | 
 | int tb_tunnel_allocated_bandwidth(struct tb_tunnel *tunnel, int *allocated_up, | 
 | 				  int *allocated_down) | 
 | { | 
 | 	if (!tb_tunnel_is_active(tunnel)) | 
 | 		return -EINVAL; | 
 |  | 
 | 	if (tunnel->allocated_bandwidth) | 
 | 		return tunnel->allocated_bandwidth(tunnel, allocated_up, | 
 | 						   allocated_down); | 
 | 	return -EOPNOTSUPP; | 
 | } | 
 |  | 
 | /** | 
 |  * tb_tunnel_alloc_bandwidth() - Change tunnel bandwidth allocation | 
 |  * @tunnel: Tunnel whose bandwidth allocation to change | 
 |  * @alloc_up: New upstream bandwidth in Mb/s | 
 |  * @alloc_down: New downstream bandwidth in Mb/s | 
 |  * | 
 |  * Tries to change tunnel bandwidth allocation. If succeeds returns %0 | 
 |  * and updates @alloc_up and @alloc_down to that was actually allocated | 
 |  * (it may not be the same as passed originally). Returns negative errno | 
 |  * in case of failure. | 
 |  */ | 
 | int tb_tunnel_alloc_bandwidth(struct tb_tunnel *tunnel, int *alloc_up, | 
 | 			      int *alloc_down) | 
 | { | 
 | 	if (!tb_tunnel_is_active(tunnel)) | 
 | 		return -EINVAL; | 
 |  | 
 | 	if (tunnel->alloc_bandwidth) | 
 | 		return tunnel->alloc_bandwidth(tunnel, alloc_up, alloc_down); | 
 |  | 
 | 	return -EOPNOTSUPP; | 
 | } | 
 |  | 
 | /** | 
 |  * tb_tunnel_consumed_bandwidth() - Return bandwidth consumed by the tunnel | 
 |  * @tunnel: Tunnel to check | 
 |  * @consumed_up: Consumed bandwidth in Mb/s from @dst_port to @src_port. | 
 |  *		 Can be %NULL. | 
 |  * @consumed_down: Consumed bandwidth in Mb/s from @src_port to @dst_port. | 
 |  *		   Can be %NULL. | 
 |  * | 
 |  * Stores the amount of isochronous bandwidth @tunnel consumes in | 
 |  * @consumed_up and @consumed_down. In case of success returns %0, | 
 |  * negative errno otherwise. | 
 |  */ | 
 | int tb_tunnel_consumed_bandwidth(struct tb_tunnel *tunnel, int *consumed_up, | 
 | 				 int *consumed_down) | 
 | { | 
 | 	int up_bw = 0, down_bw = 0; | 
 |  | 
 | 	if (!tb_tunnel_is_active(tunnel)) | 
 | 		goto out; | 
 |  | 
 | 	if (tunnel->consumed_bandwidth) { | 
 | 		int ret; | 
 |  | 
 | 		ret = tunnel->consumed_bandwidth(tunnel, &up_bw, &down_bw); | 
 | 		if (ret) | 
 | 			return ret; | 
 |  | 
 | 		tb_tunnel_dbg(tunnel, "consumed bandwidth %d/%d Mb/s\n", up_bw, | 
 | 			      down_bw); | 
 | 	} | 
 |  | 
 | out: | 
 | 	if (consumed_up) | 
 | 		*consumed_up = up_bw; | 
 | 	if (consumed_down) | 
 | 		*consumed_down = down_bw; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | /** | 
 |  * tb_tunnel_release_unused_bandwidth() - Release unused bandwidth | 
 |  * @tunnel: Tunnel whose unused bandwidth to release | 
 |  * | 
 |  * If tunnel supports dynamic bandwidth management (USB3 tunnels at the | 
 |  * moment) this function makes it to release all the unused bandwidth. | 
 |  * | 
 |  * Returns %0 in case of success and negative errno otherwise. | 
 |  */ | 
 | int tb_tunnel_release_unused_bandwidth(struct tb_tunnel *tunnel) | 
 | { | 
 | 	if (!tb_tunnel_is_active(tunnel)) | 
 | 		return 0; | 
 |  | 
 | 	if (tunnel->release_unused_bandwidth) { | 
 | 		int ret; | 
 |  | 
 | 		ret = tunnel->release_unused_bandwidth(tunnel); | 
 | 		if (ret) | 
 | 			return ret; | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | /** | 
 |  * tb_tunnel_reclaim_available_bandwidth() - Reclaim available bandwidth | 
 |  * @tunnel: Tunnel reclaiming available bandwidth | 
 |  * @available_up: Available upstream bandwidth (in Mb/s) | 
 |  * @available_down: Available downstream bandwidth (in Mb/s) | 
 |  * | 
 |  * Reclaims bandwidth from @available_up and @available_down and updates | 
 |  * the variables accordingly (e.g decreases both according to what was | 
 |  * reclaimed by the tunnel). If nothing was reclaimed the values are | 
 |  * kept as is. | 
 |  */ | 
 | void tb_tunnel_reclaim_available_bandwidth(struct tb_tunnel *tunnel, | 
 | 					   int *available_up, | 
 | 					   int *available_down) | 
 | { | 
 | 	if (!tb_tunnel_is_active(tunnel)) | 
 | 		return; | 
 |  | 
 | 	if (tunnel->reclaim_available_bandwidth) | 
 | 		tunnel->reclaim_available_bandwidth(tunnel, available_up, | 
 | 						    available_down); | 
 | } | 
 |  | 
 | const char *tb_tunnel_type_name(const struct tb_tunnel *tunnel) | 
 | { | 
 | 	return tb_tunnel_names[tunnel->type]; | 
 | } |