| // SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| /* |
| * Copyright 2024 NXP |
| */ |
| |
| #include <dt-bindings/interrupt-controller/irq.h> |
| #include <dt-bindings/i3c/i3c.h> |
| #include <dt-bindings/usb/pd.h> |
| |
| #include "imx93-pinfunc.h" |
| |
| /dts-v1/; |
| /plugin/; |
| |
| &lpi2c1 { |
| status = "disabled"; |
| }; |
| |
| &i3c1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_i3c1>; |
| #address-cells = <3>; |
| #size-cells = <0>; |
| i2c-scl-hz = <400000>; |
| status = "okay"; |
| |
| tcpc@50 { |
| compatible = "nxp,ptn5110", "tcpci"; |
| reg = <0x50 0x00 (I2C_FM | I2C_NO_FILTER_LOW_FREQUENCY)>; |
| interrupt-parent = <&gpio3>; |
| interrupts = <26 IRQ_TYPE_LEVEL_LOW>; |
| |
| connector { |
| compatible = "usb-c-connector"; |
| label = "USB-C"; |
| power-role = "dual"; |
| data-role = "dual"; |
| try-power-role = "sink"; |
| source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>; |
| sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM) |
| PDO_VAR(5000, 20000, 3000)>; |
| op-sink-microwatt = <15000000>; |
| self-powered; |
| |
| ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| port@0 { |
| reg = <0>; |
| |
| typec1_dr_sw: endpoint { |
| remote-endpoint = <&usb1_drd_sw>; |
| }; |
| }; |
| }; |
| }; |
| }; |
| }; |
| |
| &usb1_drd_sw { |
| remote-endpoint = <&typec1_dr_sw>; |
| }; |
| |
| &iomuxc { |
| pinctrl_i3c1: i3c1grp { |
| fsl,pins = < |
| MX93_PAD_I2C1_SCL__I3C1_SCL 0x40000186 |
| MX93_PAD_I2C1_SDA__I3C1_SDA 0x40000186 |
| >; |
| }; |
| }; |
