| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * nxpwifi: scan ioctl and command handling |
| * |
| * Copyright 2011-2024 NXP |
| */ |
| |
| #include "cfg.h" |
| #include "util.h" |
| #include "fw.h" |
| #include "main.h" |
| #include "cmdevt.h" |
| #include "11n.h" |
| #include "11ac.h" |
| #include "11ax.h" |
| #include "cfg80211.h" |
| |
| /* The maximum number of channels the firmware can scan per command */ |
| #define NXPWIFI_MAX_CHANNELS_PER_SPECIFIC_SCAN 14 |
| |
| #define NXPWIFI_DEF_CHANNELS_PER_SCAN_CMD 4 |
| |
| /* Memory needed to store a max sized Channel List TLV for a firmware scan */ |
| #define CHAN_TLV_MAX_SIZE (sizeof(struct nxpwifi_ie_types_header) \ |
| + (NXPWIFI_MAX_CHANNELS_PER_SPECIFIC_SCAN \ |
| * sizeof(struct nxpwifi_chan_scan_param_set))) |
| |
| /* Memory needed to store supported rate */ |
| #define RATE_TLV_MAX_SIZE (sizeof(struct nxpwifi_ie_types_rates_param_set) \ |
| + HOSTCMD_SUPPORTED_RATES) |
| |
| /* Memory needed to store a max number/size WildCard SSID TLV for a firmware scan */ |
| #define WILDCARD_SSID_TLV_MAX_SIZE \ |
| (NXPWIFI_MAX_SSID_LIST_LENGTH * \ |
| (sizeof(struct nxpwifi_ie_types_wildcard_ssid_params) \ |
| + IEEE80211_MAX_SSID_LEN)) |
| |
| /* Maximum memory needed for a nxpwifi_scan_cmd_config with all TLVs at max */ |
| #define MAX_SCAN_CFG_ALLOC (sizeof(struct nxpwifi_scan_cmd_config) \ |
| + sizeof(struct nxpwifi_ie_types_num_probes) \ |
| + sizeof(struct nxpwifi_ie_types_htcap) \ |
| + sizeof(struct nxpwifi_ie_types_vhtcap) \ |
| + sizeof(struct nxpwifi_ie_types_he_cap) \ |
| + CHAN_TLV_MAX_SIZE \ |
| + RATE_TLV_MAX_SIZE \ |
| + WILDCARD_SSID_TLV_MAX_SIZE) |
| |
| union nxpwifi_scan_cmd_config_tlv { |
| /* Scan configuration (variable length) */ |
| struct nxpwifi_scan_cmd_config config; |
| /* Max allocated block */ |
| u8 config_alloc_buf[MAX_SCAN_CFG_ALLOC]; |
| }; |
| |
| #define NXPWIFI_WPA_CIPHER_SUITE_TKIP SUITE(WLAN_OUI_MICROSOFT, 2) |
| #define NXPWIFI_WPA_CIPHER_SUITE_CCMP SUITE(WLAN_OUI_MICROSOFT, 4) |
| |
| static void |
| _dbg_security_flags(int log_level, const char *func, const char *desc, |
| struct nxpwifi_private *priv, |
| struct nxpwifi_bssdescriptor *bss_desc) |
| { |
| _nxpwifi_dbg(priv->adapter, log_level, |
| "info: %s: %s:\twpa_ie=%#x wpa2_ie=%#x WEP=%s WPA=%s WPA2=%s\tEncMode=%#x privacy=%#x\n", |
| func, desc, |
| bss_desc->bcn_wpa_ie ? |
| bss_desc->bcn_wpa_ie->vend_hdr.element_id : 0, |
| bss_desc->bcn_rsn_ie ? |
| bss_desc->bcn_rsn_ie->id : 0, |
| priv->sec_info.wep_enabled ? "e" : "d", |
| priv->sec_info.wpa_enabled ? "e" : "d", |
| priv->sec_info.wpa2_enabled ? "e" : "d", |
| priv->sec_info.encryption_mode, |
| bss_desc->privacy); |
| } |
| |
| #define dbg_security_flags(mask, desc, priv, bss_desc) \ |
| _dbg_security_flags(NXPWIFI_DBG_##mask, __func__, desc, priv, bss_desc) |
| |
| /* Parse a WPA/RSN element and check whether its PTK list contains the OUI */ |
| static u8 |
| nxpwifi_search_oui_in_ie(struct ie_body *iebody, u8 *oui) |
| { |
| u8 count; |
| |
| count = iebody->ptk_cnt[0]; |
| |
| /* |
| * PTK may contain multiple OUIs; iterate through the list and compare |
| * each one |
| */ |
| while (count) { |
| if (!memcmp(iebody->ptk_body, oui, sizeof(iebody->ptk_body))) |
| return NXPWIFI_OUI_PRESENT; |
| |
| --count; |
| if (count) |
| iebody = (struct ie_body *)((u8 *)iebody + |
| sizeof(iebody->ptk_body)); |
| } |
| |
| pr_debug("info: %s: OUI is not found in PTK\n", __func__); |
| return NXPWIFI_OUI_NOT_PRESENT; |
| } |
| |
| /* Check whether the RSN IE is present and if its PTK list contains the OUI */ |
| static u8 |
| nxpwifi_is_rsn_oui_present(struct nxpwifi_bssdescriptor *bss_desc, |
| u32 cipher) |
| { |
| struct ie_body *iebody; |
| u8 ret = NXPWIFI_OUI_NOT_PRESENT; |
| __be32 oui = cpu_to_be32(cipher); |
| |
| if (bss_desc->bcn_rsn_ie) { |
| iebody = (struct ie_body *) |
| (((u8 *)bss_desc->bcn_rsn_ie->data) + |
| RSN_GTK_OUI_OFFSET); |
| ret = nxpwifi_search_oui_in_ie(iebody, (u8 *)&oui); |
| if (ret) |
| return ret; |
| } |
| return ret; |
| } |
| |
| /* Check if the WPA IE exists and whether its PTK list contains the OUI */ |
| static u8 |
| nxpwifi_is_wpa_oui_present(struct nxpwifi_bssdescriptor *bss_desc, u32 cipher) |
| { |
| struct ie_body *iebody; |
| u8 ret = NXPWIFI_OUI_NOT_PRESENT; |
| __be32 oui = cpu_to_be32(cipher); |
| |
| if (bss_desc->bcn_wpa_ie) { |
| iebody = (struct ie_body *)((u8 *)bss_desc->bcn_wpa_ie->data + |
| WPA_GTK_OUI_OFFSET); |
| ret = nxpwifi_search_oui_in_ie(iebody, (u8 *)&oui); |
| if (ret) |
| return ret; |
| } |
| return ret; |
| } |
| |
| /* Check whether both driver and BSS operate with no security */ |
| static bool |
| nxpwifi_is_bss_no_sec(struct nxpwifi_private *priv, |
| struct nxpwifi_bssdescriptor *bss_desc) |
| { |
| if (!priv->sec_info.wep_enabled && !priv->sec_info.wpa_enabled && |
| !priv->sec_info.wpa2_enabled && |
| !bss_desc->bcn_rsn_ie && |
| !bss_desc->bcn_wpa_ie && |
| !priv->sec_info.encryption_mode && !bss_desc->privacy) { |
| return true; |
| } |
| return false; |
| } |
| |
| /* Check whether static WEP is enabled and the BSS privacy setting matches */ |
| static bool |
| nxpwifi_is_bss_static_wep(struct nxpwifi_private *priv, |
| struct nxpwifi_bssdescriptor *bss_desc) |
| { |
| if (priv->sec_info.wep_enabled && !priv->sec_info.wpa_enabled && |
| !priv->sec_info.wpa2_enabled && bss_desc->privacy) { |
| return true; |
| } |
| return false; |
| } |
| |
| /* Check whether WPA is enabled and the BSS contains a WPA IE */ |
| static bool |
| nxpwifi_is_bss_wpa(struct nxpwifi_private *priv, |
| struct nxpwifi_bssdescriptor *bss_desc) |
| { |
| if (!priv->sec_info.wep_enabled && priv->sec_info.wpa_enabled && |
| !priv->sec_info.wpa2_enabled && |
| bss_desc->bcn_wpa_ie) { |
| dbg_security_flags(INFO, "WPA", priv, bss_desc); |
| return true; |
| } |
| return false; |
| } |
| |
| /* Check whether WPA2 is enabled and the BSS includes an RSN IE */ |
| static bool |
| nxpwifi_is_bss_wpa2(struct nxpwifi_private *priv, |
| struct nxpwifi_bssdescriptor *bss_desc) |
| { |
| if (!priv->sec_info.wep_enabled && !priv->sec_info.wpa_enabled && |
| priv->sec_info.wpa2_enabled && |
| bss_desc->bcn_rsn_ie) { |
| /* |
| * Some APs (e.g., WRT54G) may omit the privacy bit even when |
| * using WPA2 |
| */ |
| dbg_security_flags(ERROR, "WPA2", priv, bss_desc); |
| return true; |
| } |
| return false; |
| } |
| |
| /* Check dynamic WEP: enabled in driver, privacy set, and no WPA/RSN IE present */ |
| static bool |
| nxpwifi_is_bss_dynamic_wep(struct nxpwifi_private *priv, |
| struct nxpwifi_bssdescriptor *bss_desc) |
| { |
| if (!priv->sec_info.wep_enabled && !priv->sec_info.wpa_enabled && |
| !priv->sec_info.wpa2_enabled && |
| !bss_desc->bcn_wpa_ie && |
| !bss_desc->bcn_rsn_ie && |
| priv->sec_info.encryption_mode && bss_desc->privacy) { |
| dbg_security_flags(INFO, "dynamic", priv, bss_desc); |
| return true; |
| } |
| return false; |
| } |
| |
| /* |
| * Check whether a scanned network is compatible with the driver's security |
| * configuration. The decision considers WEP, WPA, WPA2, privacy settings, |
| * and whether HT must be disabled when required (e.g., no AES). |
| * |
| * General rules: |
| * - Open networks: always compatible. |
| * - WPA-only: compatible; HT disabled if AES is not supported. |
| * - WPA2-only: compatible; HT disabled if AES is not supported. |
| * - Static WEP: compatible; HT disabled. |
| * - Dynamic WEP: compatible when privacy is enabled. |
| * |
| * Note: Compatibility is not enforced during roaming except for security mode. |
| */ |
| static int |
| nxpwifi_is_network_compatible(struct nxpwifi_private *priv, |
| struct nxpwifi_bssdescriptor *bss_desc, u32 mode) |
| { |
| struct nxpwifi_adapter *adapter = priv->adapter; |
| |
| bss_desc->disable_11n = false; |
| |
| /* Skip compatibility checks while roaming */ |
| if (priv->media_connected && |
| priv->bss_mode == NL80211_IFTYPE_STATION && |
| bss_desc->bss_mode == NL80211_IFTYPE_STATION) |
| return 0; |
| |
| if (priv->wps.session_enable) { |
| nxpwifi_dbg(adapter, IOCTL, |
| "info: return success directly in WPS period\n"); |
| return 0; |
| } |
| |
| if (bss_desc->chan_sw_ie_present) { |
| nxpwifi_dbg(adapter, INFO, |
| "Don't connect to AP with WLAN_EID_CHANNEL_SWITCH\n"); |
| return -EPERM; |
| } |
| |
| if (bss_desc->bss_mode == mode) { |
| if (nxpwifi_is_bss_no_sec(priv, bss_desc)) { |
| return 0; |
| } else if (nxpwifi_is_bss_static_wep(priv, bss_desc)) { |
| nxpwifi_dbg(adapter, INFO, |
| "info: Disable 11n in WEP mode.\n"); |
| bss_desc->disable_11n = true; |
| return 0; |
| } else if (nxpwifi_is_bss_wpa(priv, bss_desc)) { |
| if (((priv->config_bands & BAND_GN || |
| priv->config_bands & BAND_AN) && |
| bss_desc->bcn_ht_cap) && |
| !nxpwifi_is_wpa_oui_present(bss_desc, |
| NXPWIFI_WPA_CIPHER_SUITE_CCMP)) { |
| if (nxpwifi_is_wpa_oui_present |
| (bss_desc, NXPWIFI_WPA_CIPHER_SUITE_TKIP)) { |
| nxpwifi_dbg(adapter, INFO, |
| "info: Disable 11n if AES\t" |
| "is not supported by AP\n"); |
| bss_desc->disable_11n = true; |
| } else { |
| return -EINVAL; |
| } |
| } |
| return 0; |
| } else if (nxpwifi_is_bss_wpa2(priv, bss_desc)) { |
| if (((priv->config_bands & BAND_GN || |
| priv->config_bands & BAND_AN) && |
| bss_desc->bcn_ht_cap) && |
| !nxpwifi_is_rsn_oui_present(bss_desc, |
| WLAN_CIPHER_SUITE_CCMP)) { |
| if (nxpwifi_is_rsn_oui_present |
| (bss_desc, WLAN_CIPHER_SUITE_TKIP)) { |
| nxpwifi_dbg(adapter, INFO, |
| "info: Disable 11n if AES\t" |
| "is not supported by AP\n"); |
| bss_desc->disable_11n = true; |
| } else if (nxpwifi_is_rsn_oui_present |
| (bss_desc, WLAN_CIPHER_SUITE_GCMP_256) || |
| nxpwifi_is_rsn_oui_present |
| (bss_desc, WLAN_CIPHER_SUITE_CCMP_256)) { |
| return 0; |
| } else { |
| return -EINVAL; |
| } |
| } |
| return 0; |
| } else if (nxpwifi_is_bss_dynamic_wep(priv, bss_desc)) { |
| return 0; |
| } |
| |
| /* Security mismatch */ |
| dbg_security_flags(ERROR, "failed", priv, bss_desc); |
| return -EINVAL; |
| } |
| |
| return -EINVAL; |
| } |
| |
| /* |
| * Build the channel list for scanning based on region and band settings. |
| * Used when a scan request does not specify its own channel list. |
| */ |
| static int |
| nxpwifi_scan_create_channel_list(struct nxpwifi_private *priv, |
| const struct nxpwifi_user_scan_cfg |
| *user_scan_in, |
| struct nxpwifi_chan_scan_param_set |
| *scan_chan_list, |
| u8 filtered_scan) |
| { |
| enum nl80211_band band; |
| struct ieee80211_supported_band *sband; |
| struct ieee80211_channel *ch; |
| struct nxpwifi_adapter *adapter = priv->adapter; |
| int chan_idx = 0, i; |
| u16 scan_time = 0; |
| |
| if (user_scan_in) |
| scan_time = (u16)user_scan_in->chan_list[0].scan_time; |
| |
| for (band = 0; (band < NUM_NL80211_BANDS) ; band++) { |
| if (!priv->wdev.wiphy->bands[band]) |
| continue; |
| |
| sband = priv->wdev.wiphy->bands[band]; |
| |
| for (i = 0; (i < sband->n_channels) ; i++) { |
| ch = &sband->channels[i]; |
| if (ch->flags & IEEE80211_CHAN_DISABLED) |
| continue; |
| scan_chan_list[chan_idx].band_cfg = band; |
| |
| if (scan_time) |
| scan_chan_list[chan_idx].max_scan_time = |
| cpu_to_le16(scan_time); |
| else if ((ch->flags & IEEE80211_CHAN_NO_IR) || |
| (ch->flags & IEEE80211_CHAN_RADAR)) |
| scan_chan_list[chan_idx].max_scan_time = |
| cpu_to_le16(adapter->passive_scan_time); |
| else |
| scan_chan_list[chan_idx].max_scan_time = |
| cpu_to_le16(adapter->active_scan_time); |
| |
| if (ch->flags & IEEE80211_CHAN_NO_IR) |
| scan_chan_list[chan_idx].chan_scan_mode_bmap |= |
| (NXPWIFI_PASSIVE_SCAN | NXPWIFI_HIDDEN_SSID_REPORT); |
| else |
| scan_chan_list[chan_idx].chan_scan_mode_bmap &= |
| ~NXPWIFI_PASSIVE_SCAN; |
| |
| scan_chan_list[chan_idx].chan_number = (u32)ch->hw_value; |
| scan_chan_list[chan_idx].chan_scan_mode_bmap |= |
| NXPWIFI_DISABLE_CHAN_FILT; |
| |
| if (filtered_scan && |
| !((ch->flags & IEEE80211_CHAN_NO_IR) || |
| (ch->flags & IEEE80211_CHAN_RADAR))) |
| scan_chan_list[chan_idx].max_scan_time = |
| cpu_to_le16(adapter->specific_scan_time); |
| |
| chan_idx++; |
| } |
| } |
| return chan_idx; |
| } |
| |
| /* |
| * Build the channel-list TLV for bgscan based on region and band settings. |
| */ |
| static int |
| nxpwifi_bgscan_create_channel_list(struct nxpwifi_private *priv, |
| const struct nxpwifi_bg_scan_cfg |
| *bgscan_cfg_in, |
| struct nxpwifi_chan_scan_param_set |
| *scan_chan_list) |
| { |
| enum nl80211_band band; |
| struct ieee80211_supported_band *sband; |
| struct ieee80211_channel *ch; |
| struct nxpwifi_adapter *adapter = priv->adapter; |
| int chan_idx = 0, i; |
| u16 scan_time = 0, specific_scan_time = adapter->specific_scan_time; |
| |
| if (bgscan_cfg_in) |
| scan_time = (u16)bgscan_cfg_in->chan_list[0].scan_time; |
| |
| for (band = 0; (band < NUM_NL80211_BANDS); band++) { |
| if (!priv->wdev.wiphy->bands[band]) |
| continue; |
| |
| sband = priv->wdev.wiphy->bands[band]; |
| |
| for (i = 0; (i < sband->n_channels) ; i++) { |
| ch = &sband->channels[i]; |
| if (ch->flags & IEEE80211_CHAN_DISABLED) |
| continue; |
| scan_chan_list[chan_idx].band_cfg = band; |
| |
| if (scan_time) |
| scan_chan_list[chan_idx].max_scan_time = |
| cpu_to_le16(scan_time); |
| else if (ch->flags & IEEE80211_CHAN_NO_IR) |
| scan_chan_list[chan_idx].max_scan_time = |
| cpu_to_le16(adapter->passive_scan_time); |
| else |
| scan_chan_list[chan_idx].max_scan_time = |
| cpu_to_le16(specific_scan_time); |
| |
| if (ch->flags & IEEE80211_CHAN_NO_IR) |
| scan_chan_list[chan_idx].chan_scan_mode_bmap |= |
| NXPWIFI_PASSIVE_SCAN; |
| else |
| scan_chan_list[chan_idx].chan_scan_mode_bmap &= |
| ~NXPWIFI_PASSIVE_SCAN; |
| |
| scan_chan_list[chan_idx].chan_number = (u32)ch->hw_value; |
| chan_idx++; |
| } |
| } |
| return chan_idx; |
| } |
| |
| /* Append the rate TLV to the scan configuration command */ |
| static int |
| nxpwifi_append_rate_tlv(struct nxpwifi_private *priv, |
| struct nxpwifi_scan_cmd_config *scan_cfg_out, |
| u8 radio) |
| { |
| struct nxpwifi_ie_types_rates_param_set *rates_tlv; |
| u8 rates[NXPWIFI_SUPPORTED_RATES], *tlv_pos; |
| u32 rates_size; |
| |
| memset(rates, 0, sizeof(rates)); |
| |
| tlv_pos = (u8 *)scan_cfg_out->tlv_buf + scan_cfg_out->tlv_buf_len; |
| |
| if (priv->scan_request) |
| rates_size = nxpwifi_get_rates_from_cfg80211(priv, rates, |
| radio); |
| else |
| rates_size = nxpwifi_get_supported_rates(priv, rates); |
| |
| nxpwifi_dbg(priv->adapter, CMD, |
| "info: SCAN_CMD: Rates size = %d\n", |
| rates_size); |
| rates_tlv = (struct nxpwifi_ie_types_rates_param_set *)tlv_pos; |
| rates_tlv->header.type = cpu_to_le16(WLAN_EID_SUPP_RATES); |
| rates_tlv->header.len = cpu_to_le16((u16)rates_size); |
| memcpy(rates_tlv->rates, rates, rates_size); |
| scan_cfg_out->tlv_buf_len += sizeof(rates_tlv->header) + rates_size; |
| |
| return rates_size; |
| } |
| |
| /* |
| * Build and send multiple scan commands by chunking channel TLVs per scan |
| * limit. |
| */ |
| static int |
| nxpwifi_scan_channel_list(struct nxpwifi_private *priv, |
| u32 max_chan_per_scan, u8 filtered_scan, |
| struct nxpwifi_scan_cmd_config *scan_cfg_out, |
| struct nxpwifi_ie_types_chan_list_param_set *tlv_o, |
| struct nxpwifi_chan_scan_param_set *scan_chan_list) |
| { |
| struct nxpwifi_adapter *adapter = priv->adapter; |
| int ret = 0; |
| struct nxpwifi_chan_scan_param_set *tmp_chan_list; |
| u32 tlv_idx, rates_size, cmd_no; |
| u32 total_scan_time; |
| u32 done_early; |
| u8 radio_type; |
| |
| if (!scan_cfg_out || !tlv_o || !scan_chan_list) { |
| nxpwifi_dbg(priv->adapter, ERROR, |
| "info: Scan: Null detect: %p, %p, %p\n", |
| scan_cfg_out, tlv_o, scan_chan_list); |
| return -EINVAL; |
| } |
| |
| /* Check csa channel expiry before preparing scan list */ |
| nxpwifi_11h_get_csa_closed_channel(priv); |
| |
| tlv_o->header.type = cpu_to_le16(TLV_TYPE_CHANLIST); |
| |
| tmp_chan_list = scan_chan_list; |
| |
| /* |
| * Iterate through the channel list and send a firmware scan command for |
| * each group of max_chan_per_scan channels, or individually for |
| * channels 1, 6, and 11 when configured. |
| */ |
| while (tmp_chan_list->chan_number) { |
| tlv_idx = 0; |
| total_scan_time = 0; |
| radio_type = 0; |
| tlv_o->header.len = 0; |
| done_early = false; |
| |
| /* |
| * Build the channel TLV for the scan command. Continue adding |
| * channel TLVs until one of the following conditions is met: |
| * - tlv_idx reaches the maximum allowed per scan command |
| * - the next channel is 0 (end of the desired channel list) |
| * - done_early is set (used for per-channel scanning of 1, 6, |
| * and 11) |
| */ |
| while (tlv_idx < max_chan_per_scan && |
| tmp_chan_list->chan_number && !done_early) { |
| if (tmp_chan_list->chan_number == priv->csa_chan) { |
| tmp_chan_list++; |
| continue; |
| } |
| |
| radio_type = tmp_chan_list->band_cfg; |
| nxpwifi_dbg(priv->adapter, INFO, |
| "info: Scan: Chan(%3d), Band(%d),\t" |
| "Mode(%d, %d), Dur(%d)\n", |
| tmp_chan_list->chan_number, |
| tmp_chan_list->band_cfg, |
| tmp_chan_list->chan_scan_mode_bmap |
| & NXPWIFI_PASSIVE_SCAN, |
| (tmp_chan_list->chan_scan_mode_bmap |
| & NXPWIFI_DISABLE_CHAN_FILT) >> 1, |
| le16_to_cpu(tmp_chan_list->max_scan_time)); |
| |
| /* Copy the current channel TLV into the command being prepared */ |
| memcpy(&tlv_o->chan_scan_param[tlv_idx], tmp_chan_list, |
| sizeof(*tlv_o->chan_scan_param)); |
| |
| /* |
| * Increment the TLV header length by the size |
| * appended |
| */ |
| le16_unaligned_add_cpu(&tlv_o->header.len, |
| sizeof(*tlv_o->chan_scan_param)); |
| |
| /* |
| * The tlv buffer length is set to the number of bytes |
| * of the between the channel tlv pointer and the start |
| * of the tlv buffer. This compensates for any TLVs |
| * that were appended before the channel list. |
| */ |
| scan_cfg_out->tlv_buf_len = |
| (u32)((u8 *)tlv_o - scan_cfg_out->tlv_buf); |
| |
| scan_cfg_out->tlv_buf_len += |
| (sizeof(tlv_o->header) |
| + le16_to_cpu(tlv_o->header.len)); |
| |
| /* Advance the index for the channel TLV being constructed. */ |
| tlv_idx++; |
| |
| /* Count the total scan time per command */ |
| total_scan_time += |
| le16_to_cpu(tmp_chan_list->max_scan_time); |
| |
| done_early = false; |
| |
| /* |
| * Stop the loop if the current channel is one of 1, 6, |
| * or 11 and no SSID or BSSID filter is applied. |
| */ |
| if (!filtered_scan && |
| (tmp_chan_list->chan_number == 1 || |
| tmp_chan_list->chan_number == 6 || |
| tmp_chan_list->chan_number == 11)) |
| done_early = true; |
| |
| /* Advance the tmp pointer to the next channel to be scanned. */ |
| tmp_chan_list++; |
| |
| /* |
| * Stop the loop if the next channel is one of 1, 6, |
| * or 11. This causes that channel to be scanned alone |
| * in the next iteration. |
| */ |
| if (!filtered_scan && |
| (tmp_chan_list->chan_number == 1 || |
| tmp_chan_list->chan_number == 6 || |
| tmp_chan_list->chan_number == 11)) |
| done_early = true; |
| } |
| |
| /* Ensure the total scan time does not exceed the scan-command timeout. */ |
| if (total_scan_time > NXPWIFI_MAX_TOTAL_SCAN_TIME) { |
| nxpwifi_dbg(priv->adapter, ERROR, |
| "total scan time %dms\t" |
| "is over limit (%dms), scan skipped\n", |
| total_scan_time, |
| NXPWIFI_MAX_TOTAL_SCAN_TIME); |
| ret = -EINVAL; |
| break; |
| } |
| |
| rates_size = nxpwifi_append_rate_tlv(priv, scan_cfg_out, |
| radio_type); |
| |
| if (priv->adapter->ext_scan) |
| cmd_no = HOST_CMD_802_11_SCAN_EXT; |
| else |
| cmd_no = HOST_CMD_802_11_SCAN; |
| |
| ret = nxpwifi_send_cmd(priv, cmd_no, HOST_ACT_GEN_SET, |
| 0, scan_cfg_out, false); |
| |
| /* |
| * The rate element is updated for each scan command, but the |
| * same starting pointer is reused, so the previous rate element |
| * in scan_cfg_out->buf is overwritten. |
| */ |
| scan_cfg_out->tlv_buf_len -= |
| sizeof(struct nxpwifi_ie_types_header) + rates_size; |
| |
| if (ret) { |
| nxpwifi_cancel_pending_scan_cmd(adapter); |
| break; |
| } |
| } |
| |
| return ret; |
| } |
| |
| /* |
| * Build final scan config from user params, disabling missing filters and using |
| * defaults. |
| */ |
| static void |
| nxpwifi_config_scan(struct nxpwifi_private *priv, |
| const struct nxpwifi_user_scan_cfg *user_scan_in, |
| struct nxpwifi_scan_cmd_config *scan_cfg_out, |
| struct nxpwifi_ie_types_chan_list_param_set **chan_list_out, |
| struct nxpwifi_chan_scan_param_set *scan_chan_list, |
| u8 *max_chan_per_scan, u8 *filtered_scan, |
| u8 *scan_current_only) |
| { |
| struct nxpwifi_adapter *adapter = priv->adapter; |
| struct nxpwifi_ie_types_num_probes *num_probes_tlv; |
| struct nxpwifi_ie_types_scan_chan_gap *chan_gap_tlv; |
| struct nxpwifi_ie_types_random_mac *random_mac_tlv; |
| struct nxpwifi_ie_types_wildcard_ssid_params *wildcard_ssid_tlv; |
| struct nxpwifi_ie_types_bssid_list *bssid_tlv; |
| struct nxpwifi_ie_types_extcap *ext_cap; |
| u8 *ext_capab = NULL; |
| u8 *tlv_pos; |
| u32 num_probes; |
| u32 ssid_len; |
| u32 chan_idx; |
| u32 scan_time; |
| u32 scan_type; |
| u16 scan_dur; |
| u8 channel; |
| u8 radio_type; |
| int i, vsid; |
| u8 ssid_filter; |
| struct nxpwifi_ie_types_htcap *ht_cap; |
| struct nxpwifi_ie_types_bss_mode *bss_mode; |
| struct nxpwifi_ie_types_vhtcap *vht_cap; |
| struct nxpwifi_ie_types_he_cap *he_cap; |
| |
| /* |
| * tlv_buf_len is recalculated for each scan command. TLVs added in this |
| * routine are preserved because the send routine appends channel TLVs |
| * at chan_list_out. The difference between chan_list_out and the start |
| * of the TLV buffer determines the size of the TLVs added here. |
| */ |
| scan_cfg_out->tlv_buf_len = 0; |
| |
| /* |
| * Running TLV pointer. It is assigned to chan_list_out at the end of |
| * the function so later routines know where channel TLVs can be |
| * appended in the command buffer. |
| */ |
| tlv_pos = scan_cfg_out->tlv_buf; |
| |
| /* |
| * Initialize the scan as un-filtered; the flag is later set to TRUE |
| * below if a SSID or BSSID filter is sent in the command |
| */ |
| *filtered_scan = false; |
| |
| /* |
| * Initialize the scan as not being only on the current channel. If |
| * the channel list is customized, only contains one channel, and is |
| * the active channel, this is set true and data flow is not halted. |
| */ |
| *scan_current_only = false; |
| |
| if (user_scan_in) { |
| u8 tmpaddr[ETH_ALEN]; |
| |
| /* |
| * Default the ssid_filter flag to TRUE, set false under |
| * certain wildcard conditions and qualified by the existence |
| * of an SSID list before marking the scan as filtered |
| */ |
| ssid_filter = true; |
| |
| /* |
| * Set the BSS type scan filter, use Adapter setting if |
| * unset |
| */ |
| scan_cfg_out->bss_mode = |
| (u8)(user_scan_in->bss_mode ?: adapter->scan_mode); |
| |
| /* |
| * Set the number of probes to send, use Adapter setting |
| * if unset |
| */ |
| num_probes = user_scan_in->num_probes ?: adapter->scan_probes; |
| |
| /* |
| * Set the BSSID filter to the incoming configuration, |
| * if non-zero. If not set, it will remain disabled |
| * (all zeros). |
| */ |
| memcpy(scan_cfg_out->specific_bssid, |
| user_scan_in->specific_bssid, |
| sizeof(scan_cfg_out->specific_bssid)); |
| |
| memcpy(tmpaddr, scan_cfg_out->specific_bssid, ETH_ALEN); |
| |
| if (adapter->ext_scan && |
| !is_zero_ether_addr(tmpaddr)) { |
| bssid_tlv = |
| (struct nxpwifi_ie_types_bssid_list *)tlv_pos; |
| bssid_tlv->header.type = cpu_to_le16(TLV_TYPE_BSSID); |
| bssid_tlv->header.len = cpu_to_le16(ETH_ALEN); |
| memcpy(bssid_tlv->bssid, user_scan_in->specific_bssid, |
| ETH_ALEN); |
| tlv_pos += sizeof(struct nxpwifi_ie_types_bssid_list); |
| } |
| |
| for (i = 0; i < user_scan_in->num_ssids; i++) { |
| ssid_len = user_scan_in->ssid_list[i].ssid_len; |
| |
| wildcard_ssid_tlv = |
| (struct nxpwifi_ie_types_wildcard_ssid_params *) |
| tlv_pos; |
| wildcard_ssid_tlv->header.type = |
| cpu_to_le16(TLV_TYPE_WILDCARDSSID); |
| wildcard_ssid_tlv->header.len = |
| cpu_to_le16((u16)(ssid_len + sizeof(u8))); |
| |
| /* |
| * max_ssid_length = 0 tells firmware to perform |
| * specific scan for the SSID filled, whereas |
| * max_ssid_length = IEEE80211_MAX_SSID_LEN is for |
| * wildcard scan. |
| */ |
| if (ssid_len) |
| wildcard_ssid_tlv->max_ssid_length = 0; |
| else |
| wildcard_ssid_tlv->max_ssid_length = |
| IEEE80211_MAX_SSID_LEN; |
| |
| if (!memcmp(user_scan_in->ssid_list[i].ssid, |
| "DIRECT-", 7)) |
| wildcard_ssid_tlv->max_ssid_length = 0xfe; |
| |
| memcpy(wildcard_ssid_tlv->ssid, |
| user_scan_in->ssid_list[i].ssid, ssid_len); |
| |
| tlv_pos += (sizeof(wildcard_ssid_tlv->header) |
| + le16_to_cpu(wildcard_ssid_tlv->header.len)); |
| |
| nxpwifi_dbg(adapter, INFO, |
| "info: scan: ssid[%d]: %s, %d\n", |
| i, wildcard_ssid_tlv->ssid, |
| wildcard_ssid_tlv->max_ssid_length); |
| |
| /* |
| * Empty wildcard ssid with a maxlen will match many or |
| * potentially all SSIDs (maxlen == 32), therefore do |
| * not treat the scan as |
| * filtered. |
| */ |
| if (!ssid_len && wildcard_ssid_tlv->max_ssid_length) |
| ssid_filter = false; |
| } |
| |
| /* |
| * The default number of channels sent in the command is low to |
| * ensure the response buffer from the firmware does not |
| * truncate scan results. That is not an issue with an SSID |
| * or BSSID filter applied to the scan results in the firmware. |
| */ |
| memcpy(tmpaddr, scan_cfg_out->specific_bssid, ETH_ALEN); |
| if ((i && ssid_filter) || |
| !is_zero_ether_addr(tmpaddr)) |
| *filtered_scan = true; |
| |
| if (user_scan_in->scan_chan_gap) { |
| nxpwifi_dbg(adapter, INFO, |
| "info: scan: channel gap = %d\n", |
| user_scan_in->scan_chan_gap); |
| *max_chan_per_scan = |
| NXPWIFI_MAX_CHANNELS_PER_SPECIFIC_SCAN; |
| |
| chan_gap_tlv = (void *)tlv_pos; |
| chan_gap_tlv->header.type = |
| cpu_to_le16(TLV_TYPE_SCAN_CHANNEL_GAP); |
| chan_gap_tlv->header.len = |
| cpu_to_le16(sizeof(chan_gap_tlv->chan_gap)); |
| chan_gap_tlv->chan_gap = |
| cpu_to_le16((user_scan_in->scan_chan_gap)); |
| tlv_pos += |
| sizeof(struct nxpwifi_ie_types_scan_chan_gap); |
| } |
| |
| if (!is_zero_ether_addr(user_scan_in->random_mac)) { |
| random_mac_tlv = (void *)tlv_pos; |
| random_mac_tlv->header.type = |
| cpu_to_le16(TLV_TYPE_RANDOM_MAC); |
| random_mac_tlv->header.len = |
| cpu_to_le16(sizeof(random_mac_tlv->mac)); |
| ether_addr_copy(random_mac_tlv->mac, |
| user_scan_in->random_mac); |
| tlv_pos += |
| sizeof(struct nxpwifi_ie_types_random_mac); |
| } |
| } else { |
| scan_cfg_out->bss_mode = (u8)adapter->scan_mode; |
| num_probes = adapter->scan_probes; |
| } |
| |
| /* |
| * If a specific BSSID or SSID is used, the number of channels in the |
| * scan command will be increased to the absolute maximum. |
| */ |
| if (*filtered_scan) { |
| *max_chan_per_scan = NXPWIFI_MAX_CHANNELS_PER_SPECIFIC_SCAN; |
| } else { |
| if (!priv->media_connected) |
| *max_chan_per_scan = NXPWIFI_DEF_CHANNELS_PER_SCAN_CMD; |
| else |
| *max_chan_per_scan = |
| NXPWIFI_DEF_CHANNELS_PER_SCAN_CMD / 2; |
| } |
| |
| if (adapter->ext_scan) { |
| bss_mode = (struct nxpwifi_ie_types_bss_mode *)tlv_pos; |
| bss_mode->header.type = cpu_to_le16(TLV_TYPE_BSS_MODE); |
| bss_mode->header.len = cpu_to_le16(sizeof(bss_mode->bss_mode)); |
| bss_mode->bss_mode = scan_cfg_out->bss_mode; |
| tlv_pos += sizeof(bss_mode->header) + |
| le16_to_cpu(bss_mode->header.len); |
| } |
| |
| /* |
| * If the input config or adapter has the number of Probes set, |
| * add tlv |
| */ |
| if (num_probes) { |
| nxpwifi_dbg(adapter, INFO, |
| "info: scan: num_probes = %d\n", |
| num_probes); |
| |
| num_probes_tlv = (struct nxpwifi_ie_types_num_probes *)tlv_pos; |
| num_probes_tlv->header.type = cpu_to_le16(TLV_TYPE_NUMPROBES); |
| num_probes_tlv->header.len = |
| cpu_to_le16(sizeof(num_probes_tlv->num_probes)); |
| num_probes_tlv->num_probes = cpu_to_le16((u16)num_probes); |
| |
| tlv_pos += sizeof(num_probes_tlv->header) + |
| le16_to_cpu(num_probes_tlv->header.len); |
| } |
| |
| if (ISSUPP_11NENABLED(priv->adapter->fw_cap_info) && |
| (priv->config_bands & BAND_GN || |
| priv->config_bands & BAND_AN)) { |
| ht_cap = (struct nxpwifi_ie_types_htcap *)tlv_pos; |
| memset(ht_cap, 0, sizeof(struct nxpwifi_ie_types_htcap)); |
| ht_cap->header.type = cpu_to_le16(WLAN_EID_HT_CAPABILITY); |
| ht_cap->header.len = |
| cpu_to_le16(sizeof(struct ieee80211_ht_cap)); |
| radio_type = |
| nxpwifi_band_to_radio_type(priv->config_bands); |
| nxpwifi_fill_cap_info(priv, radio_type, &ht_cap->ht_cap); |
| tlv_pos += sizeof(struct nxpwifi_ie_types_htcap); |
| } |
| |
| if (ISSUPP_11ACENABLED(adapter->fw_cap_info) && |
| (priv->config_bands & BAND_AAC)) { |
| vht_cap = (struct nxpwifi_ie_types_vhtcap *)tlv_pos; |
| memset(vht_cap, 0, sizeof(struct nxpwifi_ie_types_vhtcap)); |
| vht_cap->header.type = cpu_to_le16(WLAN_EID_VHT_CAPABILITY); |
| vht_cap->header.len = cpu_to_le16(sizeof(struct ieee80211_vht_cap)); |
| nxpwifi_fill_vht_cap_tlv(priv, &vht_cap->vht_cap, priv->config_bands); |
| tlv_pos += sizeof(*vht_cap); |
| } |
| |
| if (ISSUPP_11AXENABLED(adapter->fw_cap_ext) && |
| (priv->config_bands & BAND_GAX || |
| priv->config_bands & BAND_AAX)) { |
| he_cap = (struct nxpwifi_ie_types_he_cap *)tlv_pos; |
| memset(he_cap, 0, sizeof(struct nxpwifi_ie_types_he_cap)); |
| tlv_pos += nxpwifi_fill_he_cap_tlv(priv, he_cap, priv->config_bands); |
| } |
| |
| if (nxpwifi_is_sta_11ax_twt_req_supported(priv)) { |
| for (vsid = 0; vsid < NXPWIFI_MAX_VSIE_NUM; vsid++) { |
| if (priv->vs_ie[vsid].mask & NXPWIFI_VSIE_MASK_SCAN) { |
| ext_capab = (u8 *)cfg80211_find_ie(WLAN_EID_EXT_CAPABILITY, |
| priv->vs_ie[vsid].ie, |
| sizeof(priv->vs_ie[vsid].ie)); |
| break; |
| } |
| } |
| |
| if (ext_capab) { |
| ext_capab += 2; |
| } else { |
| ext_cap = (struct nxpwifi_ie_types_extcap *)tlv_pos; |
| memset(ext_cap, 0, sizeof(struct nxpwifi_ie_types_extcap) + |
| NXPWIFI_EXT_CAPAB_IE_LEN); |
| ext_cap->header.type = cpu_to_le16(WLAN_EID_EXT_CAPABILITY); |
| ext_cap->header.len = cpu_to_le16(NXPWIFI_EXT_CAPAB_IE_LEN); |
| ext_capab = ext_cap->ext_capab; |
| tlv_pos += sizeof(struct nxpwifi_ie_types_extcap) + |
| le16_to_cpu(ext_cap->header.len); |
| } |
| |
| ext_capab[9] |= WLAN_EXT_CAPA10_TWT_REQUESTER_SUPPORT; |
| } |
| |
| /* Append vendor specific element TLV */ |
| nxpwifi_cmd_append_vsie_tlv(priv, NXPWIFI_VSIE_MASK_SCAN, &tlv_pos); |
| |
| /* |
| * Set the channel TLV output pointer to the end of the newly added TLVs |
| * (SSID, num_probes). Channel TLVs for each scan will be appended after |
| * these, preserving previously added TLVs. |
| */ |
| *chan_list_out = |
| (struct nxpwifi_ie_types_chan_list_param_set *)tlv_pos; |
| |
| if (user_scan_in && user_scan_in->chan_list[0].chan_number) { |
| nxpwifi_dbg(adapter, INFO, |
| "info: Scan: Using supplied channel list\n"); |
| |
| for (chan_idx = 0; |
| chan_idx < NXPWIFI_USER_SCAN_CHAN_MAX && |
| user_scan_in->chan_list[chan_idx].chan_number; |
| chan_idx++) { |
| channel = user_scan_in->chan_list[chan_idx].chan_number; |
| scan_chan_list[chan_idx].chan_number = channel; |
| |
| radio_type = |
| user_scan_in->chan_list[chan_idx].radio_type; |
| scan_chan_list[chan_idx].band_cfg = radio_type; |
| |
| scan_type = user_scan_in->chan_list[chan_idx].scan_type; |
| |
| if (scan_type == NXPWIFI_SCAN_TYPE_PASSIVE) |
| scan_chan_list[chan_idx].chan_scan_mode_bmap |= |
| (NXPWIFI_PASSIVE_SCAN | |
| NXPWIFI_HIDDEN_SSID_REPORT); |
| else |
| scan_chan_list[chan_idx].chan_scan_mode_bmap &= |
| ~NXPWIFI_PASSIVE_SCAN; |
| |
| scan_chan_list[chan_idx].chan_scan_mode_bmap |= |
| NXPWIFI_DISABLE_CHAN_FILT; |
| |
| scan_time = user_scan_in->chan_list[chan_idx].scan_time; |
| |
| if (scan_time) { |
| scan_dur = (u16)scan_time; |
| } else { |
| if (scan_type == NXPWIFI_SCAN_TYPE_PASSIVE) |
| scan_dur = adapter->passive_scan_time; |
| else if (*filtered_scan) |
| scan_dur = adapter->specific_scan_time; |
| else |
| scan_dur = adapter->active_scan_time; |
| } |
| |
| scan_chan_list[chan_idx].min_scan_time = |
| cpu_to_le16(scan_dur); |
| scan_chan_list[chan_idx].max_scan_time = |
| cpu_to_le16(scan_dur); |
| } |
| |
| /* Check if we are only scanning the current channel */ |
| if (chan_idx == 1 && |
| user_scan_in->chan_list[0].chan_number == |
| priv->curr_bss_params.bss_descriptor.channel) { |
| *scan_current_only = true; |
| nxpwifi_dbg(adapter, INFO, |
| "info: Scan: Scanning current channel only\n"); |
| } |
| } else { |
| nxpwifi_dbg(adapter, INFO, |
| "info: Scan: Creating full region channel list\n"); |
| nxpwifi_scan_create_channel_list(priv, user_scan_in, |
| scan_chan_list, |
| *filtered_scan); |
| } |
| } |
| |
| /* Parse the beacon buffer and update the BSS descriptor fields. */ |
| int nxpwifi_update_bss_desc_with_ie(struct nxpwifi_adapter *adapter, |
| struct nxpwifi_bssdescriptor *bss_entry) |
| { |
| u8 element_id; |
| u16 elem_size = sizeof(struct element); |
| struct ieee_types_fh_param_set *fh_param_set; |
| struct ieee_types_ds_param_set *ds_param_set; |
| struct ieee_types_cf_param_set *cf_param_set; |
| u8 *current_ptr; |
| u8 *rate; |
| u8 element_len; |
| u16 total_ie_len; |
| u8 bytes_to_copy; |
| u8 rate_size; |
| u8 found_data_rate_ie; |
| u32 bytes_left; |
| struct ieee_types_vendor_specific *vendor_ie; |
| const u8 wpa_oui[4] = { 0x00, 0x50, 0xf2, 0x01 }; |
| const u8 wmm_oui[4] = { 0x00, 0x50, 0xf2, 0x02 }; |
| struct element *elem; |
| |
| found_data_rate_ie = false; |
| rate_size = 0; |
| current_ptr = bss_entry->beacon_buf; |
| bytes_left = bss_entry->beacon_buf_size; |
| |
| /* Process variable element */ |
| while (bytes_left >= 2) { |
| element_id = *current_ptr; |
| element_len = *(current_ptr + 1); |
| total_ie_len = element_len + elem_size; |
| |
| if (bytes_left < total_ie_len) { |
| nxpwifi_dbg(adapter, ERROR, |
| "err: InterpretIE: in processing\t" |
| "element, bytes left < element length\n"); |
| return -EINVAL; |
| } |
| switch (element_id) { |
| case WLAN_EID_SSID: |
| if (element_len > IEEE80211_MAX_SSID_LEN) |
| return -EINVAL; |
| bss_entry->ssid.ssid_len = element_len; |
| memcpy(bss_entry->ssid.ssid, (current_ptr + 2), |
| element_len); |
| nxpwifi_dbg(adapter, INFO, |
| "info: InterpretIE: ssid: %-32s\n", |
| bss_entry->ssid.ssid); |
| break; |
| |
| case WLAN_EID_SUPP_RATES: |
| if (element_len > NXPWIFI_SUPPORTED_RATES) |
| return -EINVAL; |
| memcpy(bss_entry->data_rates, current_ptr + 2, |
| element_len); |
| memcpy(bss_entry->supported_rates, current_ptr + 2, |
| element_len); |
| rate_size = element_len; |
| found_data_rate_ie = true; |
| break; |
| |
| case WLAN_EID_FH_PARAMS: |
| if (total_ie_len < sizeof(*fh_param_set)) |
| return -EINVAL; |
| fh_param_set = |
| (struct ieee_types_fh_param_set *)current_ptr; |
| memcpy(&bss_entry->phy_param_set.fh_param_set, |
| fh_param_set, |
| sizeof(struct ieee_types_fh_param_set)); |
| break; |
| |
| case WLAN_EID_DS_PARAMS: |
| if (total_ie_len < sizeof(*ds_param_set)) |
| return -EINVAL; |
| ds_param_set = |
| (struct ieee_types_ds_param_set *)current_ptr; |
| |
| bss_entry->channel = ds_param_set->current_chan; |
| |
| memcpy(&bss_entry->phy_param_set.ds_param_set, |
| ds_param_set, |
| sizeof(struct ieee_types_ds_param_set)); |
| break; |
| |
| case WLAN_EID_CF_PARAMS: |
| if (total_ie_len < sizeof(*cf_param_set)) |
| return -EINVAL; |
| cf_param_set = |
| (struct ieee_types_cf_param_set *)current_ptr; |
| memcpy(&bss_entry->cf_param_set, |
| cf_param_set, |
| sizeof(struct ieee_types_cf_param_set)); |
| break; |
| |
| case WLAN_EID_ERP_INFO: |
| if (!element_len) |
| return -EINVAL; |
| bss_entry->erp_flags = *(current_ptr + 2); |
| break; |
| |
| case WLAN_EID_PWR_CONSTRAINT: |
| if (!element_len) |
| return -EINVAL; |
| bss_entry->local_constraint = *(current_ptr + 2); |
| bss_entry->sensed_11h = true; |
| break; |
| |
| case WLAN_EID_CHANNEL_SWITCH: |
| bss_entry->chan_sw_ie_present = true; |
| fallthrough; |
| case WLAN_EID_PWR_CAPABILITY: |
| case WLAN_EID_TPC_REPORT: |
| case WLAN_EID_QUIET: |
| bss_entry->sensed_11h = true; |
| break; |
| |
| case WLAN_EID_EXT_SUPP_RATES: |
| /* |
| * Only process extended supported rate |
| * if data rate is already found. |
| * Data rate element should come before |
| * extended supported rate element |
| */ |
| if (found_data_rate_ie) { |
| if ((element_len + rate_size) > |
| NXPWIFI_SUPPORTED_RATES) |
| bytes_to_copy = |
| (NXPWIFI_SUPPORTED_RATES - |
| rate_size); |
| else |
| bytes_to_copy = element_len; |
| |
| rate = (u8 *)bss_entry->data_rates; |
| rate += rate_size; |
| memcpy(rate, current_ptr + 2, bytes_to_copy); |
| |
| rate = (u8 *)bss_entry->supported_rates; |
| rate += rate_size; |
| memcpy(rate, current_ptr + 2, bytes_to_copy); |
| } |
| break; |
| |
| case WLAN_EID_VENDOR_SPECIFIC: |
| vendor_ie = (struct ieee_types_vendor_specific *) |
| current_ptr; |
| |
| /* 802.11 requires at least 3-byte OUI. */ |
| if (element_len < sizeof(vendor_ie->vend_hdr.oui)) |
| return -EINVAL; |
| |
| /* Not long enough for a match? Skip it. */ |
| if (element_len < sizeof(wpa_oui)) |
| break; |
| |
| if (!memcmp(&vendor_ie->vend_hdr.oui, wpa_oui, |
| sizeof(wpa_oui))) { |
| bss_entry->bcn_wpa_ie = |
| (struct ieee_types_vendor_specific *) |
| current_ptr; |
| bss_entry->wpa_offset = |
| (u16)(current_ptr - |
| bss_entry->beacon_buf); |
| } else if (!memcmp(&vendor_ie->vend_hdr.oui, wmm_oui, |
| sizeof(wmm_oui))) { |
| if (total_ie_len == |
| sizeof(struct ieee80211_wmm_param_ie) || |
| total_ie_len == |
| sizeof(struct ieee_types_wmm_info)) |
| /* |
| * Only accept and copy the WMM element if |
| * it matches the size expected for the |
| * WMM Info element or the WMM Parameter element. |
| */ |
| memcpy((u8 *)&bss_entry->wmm_ie, |
| current_ptr, total_ie_len); |
| } |
| break; |
| case WLAN_EID_RSN: |
| bss_entry->bcn_rsn_ie = |
| (struct element *)current_ptr; |
| bss_entry->rsn_offset = |
| (u16)(current_ptr - bss_entry->beacon_buf); |
| break; |
| case WLAN_EID_RSNX: |
| bss_entry->bcn_rsnx_ie = |
| (struct element *)current_ptr; |
| bss_entry->rsnx_offset = |
| (u16)(current_ptr - bss_entry->beacon_buf); |
| break; |
| case WLAN_EID_HT_CAPABILITY: |
| bss_entry->bcn_ht_cap = |
| (struct ieee80211_ht_cap *)(current_ptr + |
| elem_size); |
| bss_entry->ht_cap_offset = |
| (u16)(current_ptr + elem_size - |
| bss_entry->beacon_buf); |
| break; |
| case WLAN_EID_HT_OPERATION: |
| bss_entry->bcn_ht_oper = |
| (struct ieee80211_ht_operation *)(current_ptr + |
| elem_size); |
| bss_entry->ht_info_offset = |
| (u16)(current_ptr + elem_size - |
| bss_entry->beacon_buf); |
| break; |
| case WLAN_EID_VHT_CAPABILITY: |
| bss_entry->disable_11ac = false; |
| bss_entry->bcn_vht_cap = (void *)(current_ptr + |
| elem_size); |
| bss_entry->vht_cap_offset = |
| (u16)((u8 *)bss_entry->bcn_vht_cap - |
| bss_entry->beacon_buf); |
| break; |
| case WLAN_EID_VHT_OPERATION: |
| bss_entry->bcn_vht_oper = |
| (void *)(current_ptr + elem_size); |
| bss_entry->vht_info_offset = |
| (u16)((u8 *)bss_entry->bcn_vht_oper - |
| bss_entry->beacon_buf); |
| break; |
| case WLAN_EID_BSS_COEX_2040: |
| bss_entry->bcn_bss_co_2040 = current_ptr; |
| bss_entry->bss_co_2040_offset = |
| (u16)(current_ptr - bss_entry->beacon_buf); |
| break; |
| case WLAN_EID_EXT_CAPABILITY: |
| bss_entry->bcn_ext_cap = current_ptr; |
| bss_entry->ext_cap_offset = |
| (u16)(current_ptr - bss_entry->beacon_buf); |
| break; |
| case WLAN_EID_OPMODE_NOTIF: |
| bss_entry->oper_mode = (void *)current_ptr; |
| bss_entry->oper_mode_offset = |
| (u16)(current_ptr - bss_entry->beacon_buf); |
| break; |
| case WLAN_EID_EXTENSION: |
| if (!element_len) |
| return -EINVAL; |
| |
| elem = (struct element *)current_ptr; |
| |
| switch (elem->data[0]) { |
| case WLAN_EID_EXT_HE_CAPABILITY: |
| bss_entry->disable_11ax = false; |
| bss_entry->bcn_he_cap = |
| (void *)(current_ptr + elem_size + 1); |
| bss_entry->he_cap_offset = |
| (u16)((u8 *)bss_entry->bcn_he_cap - |
| bss_entry->beacon_buf); |
| break; |
| case WLAN_EID_EXT_HE_OPERATION: |
| bss_entry->bcn_he_oper = |
| (void *)(current_ptr + elem_size + 1); |
| bss_entry->he_info_offset = |
| (u16)((u8 *)bss_entry->bcn_he_oper - |
| bss_entry->beacon_buf); |
| break; |
| default: |
| break; |
| } |
| break; |
| default: |
| break; |
| } |
| |
| current_ptr += total_ie_len; |
| bytes_left -= total_ie_len; |
| |
| } /* while (bytes_left > 2) */ |
| return 0; |
| } |
| |
| /* Convert the radio-type scan parameter to the join command's band config. */ |
| static u8 |
| nxpwifi_radio_type_to_band(u8 radio_type) |
| { |
| switch (radio_type) { |
| case HOST_SCAN_RADIO_TYPE_A: |
| return BAND_A; |
| case HOST_SCAN_RADIO_TYPE_BG: |
| default: |
| return BAND_G; |
| } |
| } |
| |
| /* Internal helper to start a scan using the given configuration. */ |
| int nxpwifi_scan_networks(struct nxpwifi_private *priv, |
| const struct nxpwifi_user_scan_cfg *user_scan_in) |
| { |
| int ret; |
| struct nxpwifi_adapter *adapter = priv->adapter; |
| struct cmd_ctrl_node *cmd_node; |
| union nxpwifi_scan_cmd_config_tlv *scan_cfg_out; |
| struct nxpwifi_ie_types_chan_list_param_set *chan_list_out; |
| struct nxpwifi_chan_scan_param_set *scan_chan_list; |
| u8 filtered_scan; |
| u8 scan_current_chan_only; |
| u8 max_chan_per_scan; |
| |
| if (adapter->scan_processing) { |
| nxpwifi_dbg(adapter, WARN, |
| "cmd: Scan already in process...\n"); |
| return -EBUSY; |
| } |
| |
| if (priv->scan_block) { |
| nxpwifi_dbg(adapter, WARN, |
| "cmd: Scan is blocked during association...\n"); |
| return -EBUSY; |
| } |
| |
| if (test_bit(NXPWIFI_SURPRISE_REMOVED, &adapter->work_flags) || |
| test_bit(NXPWIFI_IS_CMD_TIMEDOUT, &adapter->work_flags)) { |
| nxpwifi_dbg(adapter, ERROR, |
| "Ignore scan. Card removed or firmware in bad state\n"); |
| return -EPERM; |
| } |
| |
| spin_lock_bh(&adapter->nxpwifi_cmd_lock); |
| adapter->scan_processing = true; |
| spin_unlock_bh(&adapter->nxpwifi_cmd_lock); |
| |
| scan_cfg_out = kzalloc_obj(union nxpwifi_scan_cmd_config_tlv, |
| GFP_KERNEL); |
| if (!scan_cfg_out) { |
| ret = -ENOMEM; |
| goto done; |
| } |
| |
| scan_chan_list = kzalloc_objs(struct nxpwifi_chan_scan_param_set, |
| NXPWIFI_USER_SCAN_CHAN_MAX, GFP_KERNEL); |
| if (!scan_chan_list) { |
| kfree(scan_cfg_out); |
| ret = -ENOMEM; |
| goto done; |
| } |
| |
| nxpwifi_config_scan(priv, user_scan_in, &scan_cfg_out->config, |
| &chan_list_out, scan_chan_list, &max_chan_per_scan, |
| &filtered_scan, &scan_current_chan_only); |
| |
| ret = nxpwifi_scan_channel_list(priv, max_chan_per_scan, filtered_scan, |
| &scan_cfg_out->config, chan_list_out, |
| scan_chan_list); |
| |
| /* Get scan command from scan_pending_q and put to cmd_pending_q */ |
| if (!ret) { |
| spin_lock_bh(&adapter->scan_pending_q_lock); |
| if (!list_empty(&adapter->scan_pending_q)) { |
| cmd_node = list_first_entry(&adapter->scan_pending_q, |
| struct cmd_ctrl_node, list); |
| list_del(&cmd_node->list); |
| spin_unlock_bh(&adapter->scan_pending_q_lock); |
| nxpwifi_insert_cmd_to_pending_q(adapter, cmd_node); |
| nxpwifi_queue_work(adapter, &adapter->main_work); |
| |
| /* Perform internal scan synchronously */ |
| if (!priv->scan_request) { |
| nxpwifi_dbg(adapter, INFO, |
| "wait internal scan\n"); |
| nxpwifi_wait_queue_complete(adapter, cmd_node); |
| } |
| } else { |
| spin_unlock_bh(&adapter->scan_pending_q_lock); |
| } |
| } |
| |
| kfree(scan_cfg_out); |
| kfree(scan_chan_list); |
| done: |
| if (ret) { |
| spin_lock_bh(&adapter->nxpwifi_cmd_lock); |
| adapter->scan_processing = false; |
| spin_unlock_bh(&adapter->nxpwifi_cmd_lock); |
| } |
| return ret; |
| } |
| |
| /* |
| * Build the firmware scan command from the given configuration, including |
| * fixed fields and TLVs, and set the command ID, size, and endianness. |
| */ |
| int nxpwifi_cmd_802_11_scan(struct host_cmd_ds_command *cmd, |
| struct nxpwifi_scan_cmd_config *scan_cfg) |
| { |
| struct host_cmd_ds_802_11_scan *scan_cmd = &cmd->params.scan; |
| |
| /* Set fixed field variables in scan command */ |
| scan_cmd->bss_mode = scan_cfg->bss_mode; |
| memcpy(scan_cmd->bssid, scan_cfg->specific_bssid, |
| sizeof(scan_cmd->bssid)); |
| memcpy(scan_cmd->tlv_buffer, scan_cfg->tlv_buf, scan_cfg->tlv_buf_len); |
| |
| cmd->command = cpu_to_le16(HOST_CMD_802_11_SCAN); |
| |
| /* Size is equal to the sizeof(fixed portions) + the TLV len + header */ |
| cmd->size = cpu_to_le16((u16)(sizeof(scan_cmd->bss_mode) |
| + sizeof(scan_cmd->bssid) |
| + scan_cfg->tlv_buf_len + S_DS_GEN)); |
| |
| return 0; |
| } |
| |
| /* Check compatibility of the requested network with current driver settings. */ |
| int nxpwifi_check_network_compatibility(struct nxpwifi_private *priv, |
| struct nxpwifi_bssdescriptor *bss_desc) |
| { |
| int ret = 0; |
| |
| if (!bss_desc) |
| return -EINVAL; |
| |
| if ((nxpwifi_get_cfp(priv, (u8)bss_desc->bss_band, |
| (u16)bss_desc->channel, 0))) { |
| switch (priv->bss_mode) { |
| case NL80211_IFTYPE_STATION: |
| ret = nxpwifi_is_network_compatible(priv, bss_desc, |
| priv->bss_mode); |
| if (ret) |
| nxpwifi_dbg(priv->adapter, ERROR, |
| "Incompatible network settings\n"); |
| break; |
| default: |
| ret = 0; |
| } |
| } |
| |
| return ret; |
| } |
| |
| /* Check if the SSID length is zero or all bytes are zero. */ |
| static bool nxpwifi_is_hidden_ssid(struct cfg80211_ssid *ssid) |
| { |
| int idx; |
| |
| for (idx = 0; idx < ssid->ssid_len; idx++) { |
| if (ssid->ssid[idx]) |
| return false; |
| } |
| |
| return true; |
| } |
| |
| /* Find hidden SSIDs on passive channels and save those channels for active scan. */ |
| static int nxpwifi_save_hidden_ssid_channels(struct nxpwifi_private *priv, |
| struct cfg80211_bss *bss) |
| { |
| struct nxpwifi_bssdescriptor *bss_desc; |
| int ret; |
| int chid; |
| |
| /* Allocate and fill new bss descriptor */ |
| bss_desc = kzalloc_obj(*bss_desc, GFP_KERNEL); |
| if (!bss_desc) |
| return -ENOMEM; |
| |
| ret = nxpwifi_fill_new_bss_desc(priv, bss, bss_desc); |
| if (ret) |
| goto done; |
| |
| if (nxpwifi_is_hidden_ssid(&bss_desc->ssid)) { |
| nxpwifi_dbg(priv->adapter, INFO, "found hidden SSID\n"); |
| for (chid = 0 ; chid < NXPWIFI_USER_SCAN_CHAN_MAX; chid++) { |
| if (priv->hidden_chan[chid].chan_number == |
| bss->channel->hw_value) |
| break; |
| |
| if (!priv->hidden_chan[chid].chan_number) { |
| priv->hidden_chan[chid].chan_number = |
| bss->channel->hw_value; |
| priv->hidden_chan[chid].radio_type = |
| bss->channel->band; |
| priv->hidden_chan[chid].scan_type = |
| NXPWIFI_SCAN_TYPE_ACTIVE; |
| break; |
| } |
| } |
| } |
| |
| done: |
| /* Free beacon_ie allocated by nxpwifi_fill_new_bss_desc(). */ |
| kfree(bss_desc->beacon_buf); |
| kfree(bss_desc); |
| return ret; |
| } |
| |
| static int nxpwifi_update_curr_bss_params(struct nxpwifi_private *priv, |
| struct cfg80211_bss *bss) |
| { |
| struct nxpwifi_bssdescriptor *bss_desc; |
| int ret; |
| |
| /* Allocate and fill new bss descriptor */ |
| bss_desc = kzalloc_obj(*bss_desc, GFP_KERNEL); |
| if (!bss_desc) |
| return -ENOMEM; |
| |
| ret = nxpwifi_fill_new_bss_desc(priv, bss, bss_desc); |
| if (ret) |
| goto done; |
| |
| ret = nxpwifi_check_network_compatibility(priv, bss_desc); |
| if (ret) |
| goto done; |
| |
| spin_lock_bh(&priv->curr_bcn_buf_lock); |
| /* Make a copy of current BSSID descriptor */ |
| memcpy(&priv->curr_bss_params.bss_descriptor, bss_desc, |
| sizeof(priv->curr_bss_params.bss_descriptor)); |
| |
| /* beacon_ie will be copied to its own buffer in nxpwifi_save_curr_bcn(). */ |
| nxpwifi_save_curr_bcn(priv); |
| spin_unlock_bh(&priv->curr_bcn_buf_lock); |
| |
| done: |
| /* Free beacon_ie allocated by nxpwifi_fill_new_bss_desc(). */ |
| kfree(bss_desc->beacon_buf); |
| kfree(bss_desc); |
| return ret; |
| } |
| |
| static int |
| nxpwifi_parse_single_response_buf(struct nxpwifi_private *priv, u8 **bss_info, |
| u32 *bytes_left, u64 fw_tsf, const u8 *radio_type, |
| bool ext_scan, s32 rssi_val) |
| { |
| struct nxpwifi_adapter *adapter = priv->adapter; |
| struct nxpwifi_chan_freq_power *cfp; |
| struct cfg80211_bss *bss; |
| u8 bssid[ETH_ALEN]; |
| s32 rssi; |
| const u8 *ie_buf; |
| size_t ie_len; |
| u16 channel = 0; |
| u16 beacon_size = 0; |
| u32 curr_bcn_bytes; |
| u32 freq; |
| u16 beacon_period; |
| u16 cap_info_bitmap; |
| u8 *current_ptr; |
| u64 timestamp; |
| struct nxpwifi_fixed_bcn_param *bcn_param; |
| struct nxpwifi_bss_priv *bss_priv; |
| |
| if (*bytes_left >= sizeof(beacon_size)) { |
| /* Extract & convert beacon size from command buffer */ |
| beacon_size = get_unaligned_le16((*bss_info)); |
| *bytes_left -= sizeof(beacon_size); |
| *bss_info += sizeof(beacon_size); |
| } |
| |
| if (!beacon_size || beacon_size > *bytes_left) { |
| *bss_info += *bytes_left; |
| *bytes_left = 0; |
| return -EINVAL; |
| } |
| |
| /* |
| * Initialize the current working beacon pointer for this BSS |
| * iteration |
| */ |
| current_ptr = *bss_info; |
| |
| /* Advance the return beacon pointer past the current beacon */ |
| *bss_info += beacon_size; |
| *bytes_left -= beacon_size; |
| |
| curr_bcn_bytes = beacon_size; |
| |
| /* |
| * First 5 fields are bssid, RSSI(for legacy scan only), |
| * time stamp, beacon interval, and capability information |
| */ |
| if (curr_bcn_bytes < ETH_ALEN + sizeof(u8) + |
| sizeof(struct nxpwifi_fixed_bcn_param)) { |
| nxpwifi_dbg(adapter, ERROR, |
| "InterpretIE: not enough bytes left\n"); |
| return -EINVAL; |
| } |
| |
| memcpy(bssid, current_ptr, ETH_ALEN); |
| current_ptr += ETH_ALEN; |
| curr_bcn_bytes -= ETH_ALEN; |
| |
| if (!ext_scan) { |
| rssi = (s32)*current_ptr; |
| rssi = (-rssi) * 100; /* Convert dBm to mBm */ |
| current_ptr += sizeof(u8); |
| curr_bcn_bytes -= sizeof(u8); |
| nxpwifi_dbg(adapter, INFO, |
| "info: InterpretIE: RSSI=%d\n", rssi); |
| } else { |
| rssi = rssi_val; |
| } |
| |
| bcn_param = (struct nxpwifi_fixed_bcn_param *)current_ptr; |
| current_ptr += sizeof(*bcn_param); |
| curr_bcn_bytes -= sizeof(*bcn_param); |
| |
| timestamp = le64_to_cpu(bcn_param->timestamp); |
| beacon_period = le16_to_cpu(bcn_param->beacon_period); |
| |
| cap_info_bitmap = le16_to_cpu(bcn_param->cap_info_bitmap); |
| nxpwifi_dbg(adapter, INFO, |
| "info: InterpretIE: capabilities=0x%X\n", |
| cap_info_bitmap); |
| |
| /* Rest of the current buffer are element's */ |
| ie_buf = current_ptr; |
| ie_len = curr_bcn_bytes; |
| nxpwifi_dbg(adapter, INFO, |
| "info: InterpretIE: IELength for this AP = %d\n", |
| curr_bcn_bytes); |
| |
| while (curr_bcn_bytes >= sizeof(struct element)) { |
| u8 element_id, element_len; |
| |
| element_id = *current_ptr; |
| element_len = *(current_ptr + 1); |
| if (curr_bcn_bytes < element_len + |
| sizeof(struct element)) { |
| nxpwifi_dbg(adapter, ERROR, |
| "%s: bytes left < element length\n", __func__); |
| return -EFAULT; |
| } |
| if (element_id == WLAN_EID_DS_PARAMS) { |
| channel = *(current_ptr + |
| sizeof(struct element)); |
| break; |
| } |
| |
| current_ptr += element_len + sizeof(struct element); |
| curr_bcn_bytes -= element_len + |
| sizeof(struct element); |
| } |
| |
| if (channel) { |
| struct ieee80211_channel *chan; |
| struct nxpwifi_bssdescriptor *bss_desc; |
| u8 band; |
| |
| /* Skip entry if on csa closed channel */ |
| if (channel == priv->csa_chan) { |
| nxpwifi_dbg(adapter, WARN, |
| "Dropping entry on csa closed channel\n"); |
| return 0; |
| } |
| |
| band = BAND_G; |
| if (radio_type) |
| band = nxpwifi_radio_type_to_band(*radio_type & |
| (BIT(0) | BIT(1))); |
| |
| cfp = nxpwifi_get_cfp(priv, band, channel, 0); |
| |
| freq = cfp ? cfp->freq : 0; |
| |
| chan = ieee80211_get_channel(priv->wdev.wiphy, freq); |
| |
| if (chan && !(chan->flags & IEEE80211_CHAN_DISABLED)) { |
| bss = cfg80211_inform_bss(priv->wdev.wiphy, chan, |
| CFG80211_BSS_FTYPE_UNKNOWN, |
| bssid, timestamp, |
| cap_info_bitmap, |
| beacon_period, |
| ie_buf, ie_len, rssi, |
| GFP_ATOMIC); |
| if (bss) { |
| bss_priv = (struct nxpwifi_bss_priv *)bss->priv; |
| bss_priv->band = band; |
| bss_priv->fw_tsf = fw_tsf; |
| bss_desc = |
| &priv->curr_bss_params.bss_descriptor; |
| if (priv->media_connected && |
| !memcmp(bssid, bss_desc->mac_address, |
| ETH_ALEN)) |
| nxpwifi_update_curr_bss_params(priv, |
| bss); |
| |
| if ((chan->flags & IEEE80211_CHAN_RADAR) || |
| (chan->flags & IEEE80211_CHAN_NO_IR)) { |
| nxpwifi_dbg(adapter, INFO, |
| "radar or passive channel %d\n", |
| channel); |
| nxpwifi_save_hidden_ssid_channels(priv, |
| bss); |
| } |
| |
| cfg80211_put_bss(priv->wdev.wiphy, bss); |
| } |
| } |
| } else { |
| nxpwifi_dbg(adapter, WARN, "missing BSS channel element\n"); |
| } |
| |
| return 0; |
| } |
| |
| static void nxpwifi_complete_scan(struct nxpwifi_private *priv) |
| { |
| struct nxpwifi_adapter *adapter = priv->adapter; |
| |
| adapter->survey_idx = 0; |
| if (adapter->curr_cmd->wait_q_enabled) { |
| adapter->cmd_wait_q.status = 0; |
| if (!priv->scan_request) { |
| nxpwifi_dbg(adapter, INFO, |
| "complete internal scan\n"); |
| nxpwifi_complete_cmd(adapter, adapter->curr_cmd); |
| } |
| } |
| } |
| |
| /* Find hidden SSIDs on passive channels and run active scans on them. */ |
| static int |
| nxpwifi_active_scan_req_for_passive_chan(struct nxpwifi_private *priv) |
| { |
| int ret; |
| struct nxpwifi_adapter *adapter = priv->adapter; |
| u8 id = 0; |
| struct nxpwifi_user_scan_cfg *user_scan_cfg; |
| |
| if (adapter->active_scan_triggered || !priv->scan_request || |
| priv->scan_aborting) { |
| adapter->active_scan_triggered = false; |
| return 0; |
| } |
| |
| if (!priv->hidden_chan[0].chan_number) { |
| nxpwifi_dbg(adapter, INFO, "No BSS with hidden SSID found on DFS channels\n"); |
| return 0; |
| } |
| user_scan_cfg = kzalloc_obj(*user_scan_cfg, GFP_KERNEL); |
| |
| if (!user_scan_cfg) |
| return -ENOMEM; |
| |
| for (id = 0; id < NXPWIFI_USER_SCAN_CHAN_MAX; id++) { |
| if (!priv->hidden_chan[id].chan_number) |
| break; |
| memcpy(&user_scan_cfg->chan_list[id], |
| &priv->hidden_chan[id], |
| sizeof(struct nxpwifi_user_scan_chan)); |
| } |
| |
| adapter->active_scan_triggered = true; |
| if (priv->scan_request->flags & NL80211_SCAN_FLAG_RANDOM_ADDR) |
| ether_addr_copy(user_scan_cfg->random_mac, |
| priv->scan_request->mac_addr); |
| user_scan_cfg->num_ssids = priv->scan_request->n_ssids; |
| user_scan_cfg->ssid_list = priv->scan_request->ssids; |
| |
| ret = nxpwifi_scan_networks(priv, user_scan_cfg); |
| kfree(user_scan_cfg); |
| |
| memset(&priv->hidden_chan, 0, sizeof(priv->hidden_chan)); |
| |
| if (ret) |
| nxpwifi_dbg(adapter, ERROR, "scan failed: %d\n", ret); |
| |
| return ret; |
| } |
| |
| static void nxpwifi_check_next_scan_command(struct nxpwifi_private *priv) |
| { |
| struct nxpwifi_adapter *adapter = priv->adapter; |
| struct cmd_ctrl_node *cmd_node; |
| |
| spin_lock_bh(&adapter->scan_pending_q_lock); |
| if (list_empty(&adapter->scan_pending_q)) { |
| spin_unlock_bh(&adapter->scan_pending_q_lock); |
| |
| spin_lock_bh(&adapter->nxpwifi_cmd_lock); |
| adapter->scan_processing = false; |
| spin_unlock_bh(&adapter->nxpwifi_cmd_lock); |
| |
| nxpwifi_active_scan_req_for_passive_chan(priv); |
| |
| if (!adapter->ext_scan) |
| nxpwifi_complete_scan(priv); |
| |
| if (priv->scan_request) { |
| struct cfg80211_scan_info info = { |
| .aborted = false, |
| }; |
| |
| nxpwifi_dbg(adapter, INFO, |
| "info: notifying scan done\n"); |
| cfg80211_scan_done(priv->scan_request, &info); |
| priv->scan_request = NULL; |
| priv->scan_aborting = false; |
| } else { |
| priv->scan_aborting = false; |
| nxpwifi_dbg(adapter, INFO, |
| "info: scan already aborted\n"); |
| } |
| } else if ((priv->scan_aborting && !priv->scan_request) || |
| priv->scan_block) { |
| spin_unlock_bh(&adapter->scan_pending_q_lock); |
| |
| nxpwifi_cancel_pending_scan_cmd(adapter); |
| |
| spin_lock_bh(&adapter->nxpwifi_cmd_lock); |
| adapter->scan_processing = false; |
| spin_unlock_bh(&adapter->nxpwifi_cmd_lock); |
| |
| if (!adapter->active_scan_triggered) { |
| if (priv->scan_request) { |
| struct cfg80211_scan_info info = { |
| .aborted = true, |
| }; |
| |
| nxpwifi_dbg(adapter, INFO, |
| "info: aborting scan\n"); |
| cfg80211_scan_done(priv->scan_request, &info); |
| priv->scan_request = NULL; |
| priv->scan_aborting = false; |
| } else { |
| priv->scan_aborting = false; |
| nxpwifi_dbg(adapter, INFO, |
| "info: scan already aborted\n"); |
| } |
| } |
| } else { |
| /* Move a scan command from scan_pending_q to cmd_pending_q. */ |
| cmd_node = list_first_entry(&adapter->scan_pending_q, |
| struct cmd_ctrl_node, list); |
| list_del(&cmd_node->list); |
| spin_unlock_bh(&adapter->scan_pending_q_lock); |
| nxpwifi_insert_cmd_to_pending_q(adapter, cmd_node); |
| } |
| } |
| |
| void nxpwifi_cancel_scan(struct nxpwifi_adapter *adapter) |
| { |
| struct nxpwifi_private *priv; |
| int i; |
| |
| nxpwifi_cancel_pending_scan_cmd(adapter); |
| |
| if (adapter->scan_processing) { |
| spin_lock_bh(&adapter->nxpwifi_cmd_lock); |
| adapter->scan_processing = false; |
| spin_unlock_bh(&adapter->nxpwifi_cmd_lock); |
| for (i = 0; i < adapter->priv_num; i++) { |
| priv = adapter->priv[i]; |
| if (priv->scan_request) { |
| struct cfg80211_scan_info info = { |
| .aborted = true, |
| }; |
| |
| nxpwifi_dbg(adapter, INFO, |
| "info: aborting scan\n"); |
| cfg80211_scan_done(priv->scan_request, &info); |
| priv->scan_request = NULL; |
| priv->scan_aborting = false; |
| } |
| } |
| } |
| } |
| |
| /* |
| * Handle the scan command response. |
| * |
| * The scan response buffer has the following layout: |
| * |
| * ------------------------------------------------------------- |
| * | Header (4 * t_u16): standard command response header | |
| * ------------------------------------------------------------- |
| * | BufSize (t_u16): size of the BSS description data | |
| * ------------------------------------------------------------- |
| * | NumOfSet (t_u8): number of returned BSS descriptions | |
| * ------------------------------------------------------------- |
| * | BSS description data (variable, size = BufSize) | |
| * ------------------------------------------------------------- |
| * | TLV data (variable, size = cmd_size - fixed fields) | |
| * ------------------------------------------------------------- |
| */ |
| int nxpwifi_ret_802_11_scan(struct nxpwifi_private *priv, |
| struct host_cmd_ds_command *resp) |
| { |
| int ret = 0; |
| struct nxpwifi_adapter *adapter = priv->adapter; |
| struct host_cmd_ds_802_11_scan_rsp *scan_rsp; |
| u8 *tlv_data; |
| const struct nxpwifi_ie_types_tsf_timestamp *tsf_tlv; |
| u8 *bss_info; |
| u32 scan_resp_size; |
| u32 bytes_left; |
| u32 idx; |
| u32 tlv_buf_size; |
| const struct nxpwifi_ie_types_chan_band_list_param_set *chan_band_tlv; |
| const struct chan_band_param_set *chan_band; |
| u8 is_bgscan_resp; |
| __le64 fw_tsf = 0; |
| const u8 *radio_type; |
| struct cfg80211_wowlan_nd_match *pmatch; |
| struct cfg80211_sched_scan_request *nd_config = NULL; |
| |
| is_bgscan_resp = (le16_to_cpu(resp->command) |
| == HOST_CMD_802_11_BG_SCAN_QUERY); |
| if (is_bgscan_resp) |
| scan_rsp = &resp->params.bg_scan_query_resp.scan_resp; |
| else |
| scan_rsp = &resp->params.scan_resp; |
| |
| if (scan_rsp->number_of_sets > NXPWIFI_MAX_AP) { |
| nxpwifi_dbg(adapter, ERROR, |
| "SCAN_RESP: too many AP returned (%d)\n", |
| scan_rsp->number_of_sets); |
| ret = -EINVAL; |
| goto check_next_scan; |
| } |
| |
| /* Check csa channel expiry before parsing scan response */ |
| nxpwifi_11h_get_csa_closed_channel(priv); |
| |
| bytes_left = le16_to_cpu(scan_rsp->bss_descript_size); |
| nxpwifi_dbg(adapter, INFO, |
| "info: SCAN_RESP: bss_descript_size %d\n", |
| bytes_left); |
| |
| scan_resp_size = le16_to_cpu(resp->size); |
| |
| nxpwifi_dbg(adapter, INFO, |
| "info: SCAN_RESP: returned %d APs before parsing\n", |
| scan_rsp->number_of_sets); |
| |
| bss_info = scan_rsp->bss_desc_and_tlv_buffer; |
| |
| /* |
| * TLV buffer size = scan_resp_size minus the fixed fields, BSS |
| * description data, and the command response header (S_DS_GEN). |
| */ |
| tlv_buf_size = scan_resp_size - (bytes_left |
| + sizeof(scan_rsp->bss_descript_size) |
| + sizeof(scan_rsp->number_of_sets) |
| + S_DS_GEN); |
| |
| tlv_data = (scan_rsp->bss_desc_and_tlv_buffer + |
| bytes_left); |
| |
| /* Find timestamp TLV */ |
| { |
| const struct nxpwifi_tlv *t; |
| |
| t = nxpwifi_find_tlv(TLV_TYPE_TSFTIMESTAMP, tlv_data, tlv_buf_size); |
| tsf_tlv = (const struct nxpwifi_ie_types_tsf_timestamp *)t; |
| } |
| |
| /* Find channel-band list TLV */ |
| { |
| const struct nxpwifi_tlv *t; |
| |
| t = nxpwifi_find_tlv(TLV_TYPE_CHANNELBANDLIST, tlv_data, |
| tlv_buf_size); |
| chan_band_tlv = |
| (const struct nxpwifi_ie_types_chan_band_list_param_set *)t; |
| } |
| |
| #ifdef CONFIG_PM |
| if (priv->wdev.wiphy->wowlan_config) |
| nd_config = priv->wdev.wiphy->wowlan_config->nd_config; |
| #endif |
| |
| if (nd_config) { |
| adapter->nd_info = |
| kzalloc_flex(*adapter->nd_info, matches, |
| scan_rsp->number_of_sets, GFP_ATOMIC); |
| |
| if (adapter->nd_info) |
| adapter->nd_info->n_matches = scan_rsp->number_of_sets; |
| } |
| |
| for (idx = 0; idx < scan_rsp->number_of_sets && bytes_left; idx++) { |
| /* |
| * If a TSF TLV is present, save its TSF value in fw_tsf. This |
| * is the firmware TSF at the time the beacon or probe response |
| * was received. |
| */ |
| if (tsf_tlv) |
| memcpy(&fw_tsf, &tsf_tlv->tsf_data[idx * TSF_DATA_SIZE], |
| sizeof(fw_tsf)); |
| |
| if (chan_band_tlv) { |
| chan_band = &chan_band_tlv->chan_band_param[idx]; |
| radio_type = &chan_band->radio_type; |
| } else { |
| radio_type = NULL; |
| } |
| |
| if (chan_band_tlv && adapter->nd_info) { |
| adapter->nd_info->matches[idx] = |
| kzalloc(sizeof(*pmatch) + sizeof(u32), |
| GFP_ATOMIC); |
| |
| pmatch = adapter->nd_info->matches[idx]; |
| |
| if (pmatch) { |
| pmatch->n_channels = 1; |
| pmatch->channels[0] = chan_band->chan_number; |
| } |
| } |
| |
| ret = nxpwifi_parse_single_response_buf(priv, &bss_info, |
| &bytes_left, |
| le64_to_cpu(fw_tsf), |
| radio_type, false, 0); |
| if (ret) |
| goto check_next_scan; |
| } |
| |
| check_next_scan: |
| nxpwifi_check_next_scan_command(priv); |
| return ret; |
| } |
| |
| /* |
| * Prepare the extended scan command using the provided scan configuration |
| * and build the structure to be sent to firmware. |
| */ |
| int nxpwifi_cmd_802_11_scan_ext(struct nxpwifi_private *priv, |
| struct host_cmd_ds_command *cmd, |
| void *data_buf) |
| { |
| struct host_cmd_ds_802_11_scan_ext *ext_scan = &cmd->params.ext_scan; |
| struct nxpwifi_scan_cmd_config *scan_cfg = data_buf; |
| |
| memcpy(ext_scan->tlv_buffer, scan_cfg->tlv_buf, scan_cfg->tlv_buf_len); |
| |
| cmd->command = cpu_to_le16(HOST_CMD_802_11_SCAN_EXT); |
| |
| /* Size is equal to the sizeof(fixed portions) + the TLV len + header */ |
| cmd->size = cpu_to_le16((u16)(sizeof(ext_scan->reserved) |
| + scan_cfg->tlv_buf_len + S_DS_GEN)); |
| |
| return 0; |
| } |
| |
| /* Prepare the background scan config command to send to firmware. */ |
| int nxpwifi_cmd_802_11_bg_scan_config(struct nxpwifi_private *priv, |
| struct host_cmd_ds_command *cmd, |
| void *data_buf) |
| { |
| struct host_cmd_ds_802_11_bg_scan_config *bgscan_config = |
| &cmd->params.bg_scan_config; |
| struct nxpwifi_bg_scan_cfg *bgscan_cfg_in = data_buf; |
| u8 *tlv_pos = bgscan_config->tlv; |
| u8 num_probes; |
| u32 ssid_len, chan_idx, scan_time, scan_type, scan_dur, chan_num; |
| int i; |
| struct nxpwifi_ie_types_num_probes *num_probes_tlv; |
| struct nxpwifi_ie_types_repeat_count *repeat_count_tlv; |
| struct nxpwifi_ie_types_min_rssi_threshold *rssi_threshold_tlv; |
| struct nxpwifi_ie_types_bgscan_start_later *start_later_tlv; |
| struct nxpwifi_ie_types_wildcard_ssid_params *wildcard_ssid_tlv; |
| struct nxpwifi_ie_types_chan_list_param_set *tlv_l; |
| struct nxpwifi_chan_scan_param_set *temp_chan; |
| |
| cmd->command = cpu_to_le16(HOST_CMD_802_11_BG_SCAN_CONFIG); |
| cmd->size = cpu_to_le16(sizeof(*bgscan_config) + S_DS_GEN); |
| |
| bgscan_config->action = cpu_to_le16(bgscan_cfg_in->action); |
| bgscan_config->enable = bgscan_cfg_in->enable; |
| bgscan_config->bss_type = bgscan_cfg_in->bss_type; |
| bgscan_config->scan_interval = |
| cpu_to_le32(bgscan_cfg_in->scan_interval); |
| bgscan_config->report_condition = |
| cpu_to_le32(bgscan_cfg_in->report_condition); |
| |
| /* stop sched scan */ |
| if (!bgscan_config->enable) |
| return 0; |
| |
| bgscan_config->chan_per_scan = bgscan_cfg_in->chan_per_scan; |
| |
| num_probes = (bgscan_cfg_in->num_probes ? |
| bgscan_cfg_in->num_probes : priv->adapter->scan_probes); |
| |
| if (num_probes) { |
| num_probes_tlv = (struct nxpwifi_ie_types_num_probes *)tlv_pos; |
| num_probes_tlv->header.type = cpu_to_le16(TLV_TYPE_NUMPROBES); |
| num_probes_tlv->header.len = |
| cpu_to_le16(sizeof(num_probes_tlv->num_probes)); |
| num_probes_tlv->num_probes = cpu_to_le16((u16)num_probes); |
| |
| tlv_pos += sizeof(num_probes_tlv->header) + |
| le16_to_cpu(num_probes_tlv->header.len); |
| } |
| |
| if (bgscan_cfg_in->repeat_count) { |
| repeat_count_tlv = |
| (struct nxpwifi_ie_types_repeat_count *)tlv_pos; |
| repeat_count_tlv->header.type = |
| cpu_to_le16(TLV_TYPE_REPEAT_COUNT); |
| repeat_count_tlv->header.len = |
| cpu_to_le16(sizeof(repeat_count_tlv->repeat_count)); |
| repeat_count_tlv->repeat_count = |
| cpu_to_le16(bgscan_cfg_in->repeat_count); |
| |
| tlv_pos += sizeof(repeat_count_tlv->header) + |
| le16_to_cpu(repeat_count_tlv->header.len); |
| } |
| |
| if (bgscan_cfg_in->rssi_threshold) { |
| rssi_threshold_tlv = |
| (struct nxpwifi_ie_types_min_rssi_threshold *)tlv_pos; |
| rssi_threshold_tlv->header.type = |
| cpu_to_le16(TLV_TYPE_RSSI_LOW); |
| rssi_threshold_tlv->header.len = |
| cpu_to_le16(sizeof(rssi_threshold_tlv->rssi_threshold)); |
| rssi_threshold_tlv->rssi_threshold = |
| cpu_to_le16(bgscan_cfg_in->rssi_threshold); |
| |
| tlv_pos += sizeof(rssi_threshold_tlv->header) + |
| le16_to_cpu(rssi_threshold_tlv->header.len); |
| } |
| |
| for (i = 0; i < bgscan_cfg_in->num_ssids; i++) { |
| ssid_len = bgscan_cfg_in->ssid_list[i].ssid.ssid_len; |
| |
| wildcard_ssid_tlv = |
| (struct nxpwifi_ie_types_wildcard_ssid_params *)tlv_pos; |
| wildcard_ssid_tlv->header.type = |
| cpu_to_le16(TLV_TYPE_WILDCARDSSID); |
| wildcard_ssid_tlv->header.len = |
| cpu_to_le16((u16)(ssid_len + sizeof(u8))); |
| |
| /* |
| * max_ssid_length = 0 tells firmware to scan only for the given |
| * SSID. max_ssid_length = IEEE80211_MAX_SSID_LEN triggers a |
| * wildcard scan. |
| */ |
| if (ssid_len) |
| wildcard_ssid_tlv->max_ssid_length = 0; |
| else |
| wildcard_ssid_tlv->max_ssid_length = |
| IEEE80211_MAX_SSID_LEN; |
| |
| memcpy(wildcard_ssid_tlv->ssid, |
| bgscan_cfg_in->ssid_list[i].ssid.ssid, ssid_len); |
| |
| tlv_pos += (sizeof(wildcard_ssid_tlv->header) + |
| le16_to_cpu(wildcard_ssid_tlv->header.len)); |
| } |
| |
| tlv_l = (struct nxpwifi_ie_types_chan_list_param_set *)tlv_pos; |
| |
| if (bgscan_cfg_in->chan_list[0].chan_number) { |
| nxpwifi_dbg(priv->adapter, INFO, "info: bgscan: Using supplied channel list\n"); |
| |
| tlv_l->header.type = cpu_to_le16(TLV_TYPE_CHANLIST); |
| |
| for (chan_idx = 0; |
| chan_idx < NXPWIFI_BG_SCAN_CHAN_MAX && |
| bgscan_cfg_in->chan_list[chan_idx].chan_number; |
| chan_idx++) { |
| temp_chan = &tlv_l->chan_scan_param[chan_idx]; |
| |
| /* Increment the TLV header length by size appended */ |
| le16_unaligned_add_cpu(&tlv_l->header.len, |
| sizeof(*tlv_l->chan_scan_param)); |
| |
| temp_chan->chan_number = |
| bgscan_cfg_in->chan_list[chan_idx].chan_number; |
| temp_chan->band_cfg = |
| bgscan_cfg_in->chan_list[chan_idx].radio_type; |
| |
| scan_type = |
| bgscan_cfg_in->chan_list[chan_idx].scan_type; |
| |
| if (scan_type == NXPWIFI_SCAN_TYPE_PASSIVE) |
| temp_chan->chan_scan_mode_bmap |= |
| NXPWIFI_PASSIVE_SCAN; |
| else |
| temp_chan->chan_scan_mode_bmap &= |
| ~NXPWIFI_PASSIVE_SCAN; |
| |
| scan_time = bgscan_cfg_in->chan_list[chan_idx].scan_time; |
| |
| if (scan_time) { |
| scan_dur = (u16)scan_time; |
| } else { |
| scan_dur = (scan_type == |
| NXPWIFI_SCAN_TYPE_PASSIVE) ? |
| priv->adapter->passive_scan_time : |
| priv->adapter->specific_scan_time; |
| } |
| |
| temp_chan->min_scan_time = cpu_to_le16(scan_dur); |
| temp_chan->max_scan_time = cpu_to_le16(scan_dur); |
| } |
| } else { |
| nxpwifi_dbg(priv->adapter, INFO, |
| "info: bgscan: Creating full region channel list\n"); |
| chan_num = |
| nxpwifi_bgscan_create_channel_list |
| (priv, bgscan_cfg_in, |
| tlv_l->chan_scan_param); |
| le16_unaligned_add_cpu(&tlv_l->header.len, |
| chan_num * |
| sizeof(*tlv_l->chan_scan_param)); |
| } |
| |
| tlv_pos += (sizeof(tlv_l->header) |
| + le16_to_cpu(tlv_l->header.len)); |
| |
| if (bgscan_cfg_in->start_later) { |
| start_later_tlv = |
| (struct nxpwifi_ie_types_bgscan_start_later *)tlv_pos; |
| start_later_tlv->header.type = |
| cpu_to_le16(TLV_TYPE_BGSCAN_START_LATER); |
| start_later_tlv->header.len = |
| cpu_to_le16(sizeof(start_later_tlv->start_later)); |
| start_later_tlv->start_later = |
| cpu_to_le16(bgscan_cfg_in->start_later); |
| |
| tlv_pos += sizeof(start_later_tlv->header) + |
| le16_to_cpu(start_later_tlv->header.len); |
| } |
| |
| /* Append vendor specific element TLV */ |
| nxpwifi_cmd_append_vsie_tlv(priv, NXPWIFI_VSIE_MASK_BGSCAN, &tlv_pos); |
| |
| le16_unaligned_add_cpu(&cmd->size, tlv_pos - bgscan_config->tlv); |
| |
| return 0; |
| } |
| |
| int nxpwifi_stop_bg_scan(struct nxpwifi_private *priv) |
| { |
| struct nxpwifi_bg_scan_cfg *bgscan_cfg; |
| int ret; |
| |
| if (!priv->sched_scanning) { |
| nxpwifi_dbg(priv->adapter, MSG, "bgscan already stopped!\n"); |
| return 0; |
| } |
| |
| bgscan_cfg = kzalloc_obj(*bgscan_cfg, GFP_KERNEL); |
| if (!bgscan_cfg) |
| return -ENOMEM; |
| |
| bgscan_cfg->bss_type = NXPWIFI_BSS_MODE_INFRA; |
| bgscan_cfg->action = NXPWIFI_BGSCAN_ACT_SET; |
| bgscan_cfg->enable = false; |
| |
| ret = nxpwifi_send_cmd(priv, HOST_CMD_802_11_BG_SCAN_CONFIG, |
| HOST_ACT_GEN_SET, 0, bgscan_cfg, true); |
| if (!ret) |
| priv->sched_scanning = false; |
| |
| kfree(bgscan_cfg); |
| return ret; |
| } |
| |
| static void |
| nxpwifi_update_chan_statistics(struct nxpwifi_private *priv, |
| struct nxpwifi_ietypes_chanstats *tlv_stat) |
| { |
| struct nxpwifi_adapter *adapter = priv->adapter; |
| u8 i, num_chan; |
| struct nxpwifi_fw_chan_stats *fw_chan_stats; |
| struct nxpwifi_chan_stats chan_stats; |
| |
| fw_chan_stats = (void *)((u8 *)tlv_stat + |
| sizeof(struct nxpwifi_ie_types_header)); |
| num_chan = le16_to_cpu(tlv_stat->header.len) / |
| sizeof(struct nxpwifi_chan_stats); |
| |
| for (i = 0 ; i < num_chan; i++) { |
| if (adapter->survey_idx >= adapter->num_in_chan_stats) { |
| nxpwifi_dbg(adapter, WARN, |
| "FW reported too many channel results (max %d)\n", |
| adapter->num_in_chan_stats); |
| return; |
| } |
| chan_stats.chan_num = fw_chan_stats->chan_num; |
| chan_stats.bandcfg = fw_chan_stats->bandcfg; |
| chan_stats.flags = fw_chan_stats->flags; |
| chan_stats.noise = fw_chan_stats->noise; |
| chan_stats.total_bss = le16_to_cpu(fw_chan_stats->total_bss); |
| chan_stats.cca_scan_dur = |
| le16_to_cpu(fw_chan_stats->cca_scan_dur); |
| chan_stats.cca_busy_dur = |
| le16_to_cpu(fw_chan_stats->cca_busy_dur); |
| nxpwifi_dbg(adapter, INFO, |
| "chan=%d, noise=%d, total_network=%d scan_duration=%d, busy_duration=%d\n", |
| chan_stats.chan_num, |
| chan_stats.noise, |
| chan_stats.total_bss, |
| chan_stats.cca_scan_dur, |
| chan_stats.cca_busy_dur); |
| memcpy(&adapter->chan_stats[adapter->survey_idx++], &chan_stats, |
| sizeof(struct nxpwifi_chan_stats)); |
| fw_chan_stats++; |
| } |
| } |
| |
| /* Handle the extended scan command response. */ |
| int nxpwifi_ret_802_11_scan_ext(struct nxpwifi_private *priv, |
| struct host_cmd_ds_command *resp) |
| { |
| struct nxpwifi_adapter *adapter = priv->adapter; |
| struct host_cmd_ds_802_11_scan_ext *ext_scan_resp; |
| struct nxpwifi_ie_types_header *tlv; |
| struct nxpwifi_ietypes_chanstats *tlv_stat; |
| u16 buf_left, type, len; |
| |
| struct host_cmd_ds_command *cmd_ptr; |
| struct cmd_ctrl_node *cmd_node; |
| bool complete_scan = false; |
| |
| nxpwifi_dbg(adapter, INFO, "info: EXT scan returns successfully\n"); |
| |
| ext_scan_resp = &resp->params.ext_scan; |
| |
| tlv = (void *)ext_scan_resp->tlv_buffer; |
| buf_left = le16_to_cpu(resp->size) - (sizeof(*ext_scan_resp) + S_DS_GEN); |
| |
| while (buf_left >= sizeof(struct nxpwifi_ie_types_header)) { |
| type = le16_to_cpu(tlv->type); |
| len = le16_to_cpu(tlv->len); |
| |
| if (buf_left < (sizeof(struct nxpwifi_ie_types_header) + len)) { |
| nxpwifi_dbg(adapter, ERROR, |
| "error processing scan response TLVs"); |
| break; |
| } |
| |
| switch (type) { |
| case TLV_TYPE_CHANNEL_STATS: |
| tlv_stat = (void *)tlv; |
| nxpwifi_update_chan_statistics(priv, tlv_stat); |
| break; |
| default: |
| break; |
| } |
| |
| buf_left -= len + sizeof(struct nxpwifi_ie_types_header); |
| tlv = (void *)((u8 *)tlv + len + |
| sizeof(struct nxpwifi_ie_types_header)); |
| } |
| |
| spin_lock_bh(&adapter->cmd_pending_q_lock); |
| spin_lock_bh(&adapter->scan_pending_q_lock); |
| if (list_empty(&adapter->scan_pending_q)) { |
| complete_scan = true; |
| list_for_each_entry(cmd_node, &adapter->cmd_pending_q, list) { |
| cmd_ptr = (void *)cmd_node->cmd_skb->data; |
| if (le16_to_cpu(cmd_ptr->command) == |
| HOST_CMD_802_11_SCAN_EXT) { |
| nxpwifi_dbg(adapter, INFO, |
| "Scan pending in command pending list"); |
| complete_scan = false; |
| break; |
| } |
| } |
| } |
| spin_unlock_bh(&adapter->scan_pending_q_lock); |
| spin_unlock_bh(&adapter->cmd_pending_q_lock); |
| |
| if (complete_scan) |
| nxpwifi_complete_scan(priv); |
| |
| return 0; |
| } |
| |
| /* |
| * Handle the extended scan report event: parse the results and notify |
| * cfg80211. |
| */ |
| int nxpwifi_handle_event_ext_scan_report(struct nxpwifi_private *priv, |
| void *buf) |
| { |
| int ret = 0; |
| struct nxpwifi_adapter *adapter = priv->adapter; |
| u8 *bss_info; |
| u32 bytes_left, bytes_left_for_tlv, idx; |
| u16 type, len; |
| struct nxpwifi_ie_types_data *tlv; |
| struct nxpwifi_ie_types_scan_rsp *scan_rsp_tlv; |
| struct nxpwifi_ie_types_scan_inf *scan_info_tlv; |
| u8 *radio_type; |
| u64 fw_tsf = 0; |
| s32 rssi = 0; |
| struct nxpwifi_event_scan_result *event_scan = buf; |
| u8 num_of_set = event_scan->num_of_set; |
| u8 *scan_resp = buf + sizeof(struct nxpwifi_event_scan_result); |
| u16 scan_resp_size = le16_to_cpu(event_scan->buf_size); |
| |
| if (num_of_set > NXPWIFI_MAX_AP) { |
| nxpwifi_dbg(adapter, ERROR, |
| "EXT_SCAN: Invalid number of AP returned (%d)!!\n", |
| num_of_set); |
| ret = -EINVAL; |
| goto check_next_scan; |
| } |
| |
| bytes_left = scan_resp_size; |
| nxpwifi_dbg(adapter, INFO, |
| "EXT_SCAN: size %d, returned %d APs...", |
| scan_resp_size, num_of_set); |
| nxpwifi_dbg_dump(adapter, CMD_D, "EXT_SCAN buffer:", buf, |
| scan_resp_size + |
| sizeof(struct nxpwifi_event_scan_result)); |
| |
| tlv = (struct nxpwifi_ie_types_data *)scan_resp; |
| |
| for (idx = 0; idx < num_of_set && bytes_left; idx++) { |
| type = le16_to_cpu(tlv->header.type); |
| len = le16_to_cpu(tlv->header.len); |
| if (bytes_left < sizeof(struct nxpwifi_ie_types_header) + len) { |
| nxpwifi_dbg(adapter, ERROR, |
| "EXT_SCAN: Error bytes left < TLV length\n"); |
| break; |
| } |
| scan_rsp_tlv = NULL; |
| scan_info_tlv = NULL; |
| bytes_left_for_tlv = bytes_left; |
| |
| /* |
| * BSS response TLV with beacon or probe response buffer |
| * at the initial position of each descriptor |
| */ |
| if (type != TLV_TYPE_BSS_SCAN_RSP) |
| break; |
| |
| bss_info = (u8 *)tlv; |
| scan_rsp_tlv = (struct nxpwifi_ie_types_scan_rsp *)tlv; |
| tlv = (struct nxpwifi_ie_types_data *)(tlv->data + len); |
| bytes_left_for_tlv -= |
| (len + sizeof(struct nxpwifi_ie_types_header)); |
| |
| while (bytes_left_for_tlv >= |
| sizeof(struct nxpwifi_ie_types_header) && |
| le16_to_cpu(tlv->header.type) != TLV_TYPE_BSS_SCAN_RSP) { |
| type = le16_to_cpu(tlv->header.type); |
| len = le16_to_cpu(tlv->header.len); |
| if (bytes_left_for_tlv < |
| sizeof(struct nxpwifi_ie_types_header) + len) { |
| nxpwifi_dbg(adapter, ERROR, |
| "EXT_SCAN: Error in processing TLV,\t" |
| "bytes left < TLV length\n"); |
| scan_rsp_tlv = NULL; |
| bytes_left_for_tlv = 0; |
| continue; |
| } |
| switch (type) { |
| case TLV_TYPE_BSS_SCAN_INFO: |
| scan_info_tlv = |
| (struct nxpwifi_ie_types_scan_inf *)tlv; |
| if (len != |
| sizeof(struct nxpwifi_ie_types_scan_inf) - |
| sizeof(struct nxpwifi_ie_types_header)) { |
| bytes_left_for_tlv = 0; |
| continue; |
| } |
| break; |
| default: |
| break; |
| } |
| tlv = (struct nxpwifi_ie_types_data *)(tlv->data + len); |
| bytes_left -= |
| (len + sizeof(struct nxpwifi_ie_types_header)); |
| bytes_left_for_tlv -= |
| (len + sizeof(struct nxpwifi_ie_types_header)); |
| } |
| |
| if (!scan_rsp_tlv) |
| break; |
| |
| /* |
| * Advance pointer to the beacon buffer length and |
| * update the bytes count so that the function |
| * wlan_interpret_bss_desc_with_ie() can handle the |
| * scan buffer withut any change |
| */ |
| bss_info += sizeof(u16); |
| bytes_left -= sizeof(u16); |
| |
| if (scan_info_tlv) { |
| rssi = (s32)(s16)(le16_to_cpu(scan_info_tlv->rssi)); |
| rssi *= 100; /* Convert dBm to mBm */ |
| nxpwifi_dbg(adapter, INFO, |
| "info: InterpretIE: RSSI=%d\n", rssi); |
| fw_tsf = le64_to_cpu(scan_info_tlv->tsf); |
| radio_type = &scan_info_tlv->radio_type; |
| } else { |
| radio_type = NULL; |
| } |
| ret = nxpwifi_parse_single_response_buf(priv, &bss_info, |
| &bytes_left, fw_tsf, |
| radio_type, true, rssi); |
| if (ret) |
| goto check_next_scan; |
| } |
| |
| check_next_scan: |
| if (!event_scan->more_event) |
| nxpwifi_check_next_scan_command(priv); |
| |
| return ret; |
| } |
| |
| /* |
| * Prepare the background scan query command. Sets the command ID, size, |
| * flush parameter, and fixes endianness. |
| */ |
| int nxpwifi_cmd_802_11_bg_scan_query(struct host_cmd_ds_command *cmd) |
| { |
| struct host_cmd_ds_802_11_bg_scan_query *bg_query = |
| &cmd->params.bg_scan_query; |
| |
| cmd->command = cpu_to_le16(HOST_CMD_802_11_BG_SCAN_QUERY); |
| cmd->size = cpu_to_le16(sizeof(struct host_cmd_ds_802_11_bg_scan_query) |
| + S_DS_GEN); |
| |
| bg_query->flush = 1; |
| |
| return 0; |
| } |
| |
| /* Insert a scan command node into the scan_pending_q. */ |
| void |
| nxpwifi_queue_scan_cmd(struct nxpwifi_private *priv, |
| struct cmd_ctrl_node *cmd_node) |
| { |
| struct nxpwifi_adapter *adapter = priv->adapter; |
| |
| cmd_node->wait_q_enabled = true; |
| cmd_node->condition = &adapter->scan_wait_q_woken; |
| spin_lock_bh(&adapter->scan_pending_q_lock); |
| list_add_tail(&cmd_node->list, &adapter->scan_pending_q); |
| spin_unlock_bh(&adapter->scan_pending_q_lock); |
| } |
| |
| /* Append a vendor-specific element TLV to the buffer. */ |
| int |
| nxpwifi_cmd_append_vsie_tlv(struct nxpwifi_private *priv, |
| u16 vsie_mask, u8 **buffer) |
| { |
| int id, ret_len = 0; |
| struct nxpwifi_ie_types_vendor_param_set *vs_param_set; |
| |
| if (!buffer) |
| return 0; |
| if (!(*buffer)) |
| return 0; |
| |
| /* |
| * Traverse through the saved vendor specific element array and append |
| * the selected(scan/assoc) element as TLV to the command |
| */ |
| for (id = 0; id < NXPWIFI_MAX_VSIE_NUM; id++) { |
| if (priv->vs_ie[id].mask & vsie_mask) { |
| vs_param_set = |
| (struct nxpwifi_ie_types_vendor_param_set *) |
| *buffer; |
| vs_param_set->header.type = |
| cpu_to_le16(TLV_TYPE_PASSTHROUGH); |
| vs_param_set->header.len = |
| cpu_to_le16((((u16)priv->vs_ie[id].ie[1]) |
| & 0x00FF) + 2); |
| if (le16_to_cpu(vs_param_set->header.len) > |
| NXPWIFI_MAX_VSIE_LEN) { |
| nxpwifi_dbg(priv->adapter, ERROR, |
| "Invalid param length!\n"); |
| break; |
| } |
| |
| memcpy(vs_param_set->ie, priv->vs_ie[id].ie, |
| le16_to_cpu(vs_param_set->header.len)); |
| *buffer += le16_to_cpu(vs_param_set->header.len) + |
| sizeof(struct nxpwifi_ie_types_header); |
| ret_len += le16_to_cpu(vs_param_set->header.len) + |
| sizeof(struct nxpwifi_ie_types_header); |
| } |
| } |
| return ret_len; |
| } |
| |
| /* |
| * Save the beacon buffer of the current BSS descriptor. |
| * |
| * The buffer is preserved so it can be restored when the current SSID's |
| * beacon is missing, such as when: |
| * - the SSID was not found in the latest scan, or |
| * - the SSID was the last entry in the scan table and was overwritten. |
| */ |
| void |
| nxpwifi_save_curr_bcn(struct nxpwifi_private *priv) |
| { |
| struct nxpwifi_bssdescriptor *curr_bss = |
| &priv->curr_bss_params.bss_descriptor; |
| |
| if (!curr_bss->beacon_buf_size) |
| return; |
| |
| /* allocate beacon buffer at 1st time; or if it's size has changed */ |
| if (!priv->curr_bcn_buf || |
| priv->curr_bcn_size != curr_bss->beacon_buf_size) { |
| priv->curr_bcn_size = curr_bss->beacon_buf_size; |
| |
| kfree(priv->curr_bcn_buf); |
| priv->curr_bcn_buf = kmalloc(curr_bss->beacon_buf_size, |
| GFP_ATOMIC); |
| if (!priv->curr_bcn_buf) |
| return; |
| } |
| |
| memcpy(priv->curr_bcn_buf, curr_bss->beacon_buf, |
| curr_bss->beacon_buf_size); |
| nxpwifi_dbg(priv->adapter, INFO, |
| "info: current beacon saved %d\n", |
| priv->curr_bcn_size); |
| |
| curr_bss->beacon_buf = priv->curr_bcn_buf; |
| |
| /* adjust the pointers in the current BSS descriptor */ |
| if (curr_bss->bcn_wpa_ie) |
| curr_bss->bcn_wpa_ie = |
| (struct ieee_types_vendor_specific *) |
| (curr_bss->beacon_buf + |
| curr_bss->wpa_offset); |
| |
| if (curr_bss->bcn_rsn_ie) |
| curr_bss->bcn_rsn_ie = |
| (struct element *)(curr_bss->beacon_buf + |
| curr_bss->rsn_offset); |
| |
| if (curr_bss->bcn_ht_cap) |
| curr_bss->bcn_ht_cap = (struct ieee80211_ht_cap *) |
| (curr_bss->beacon_buf + |
| curr_bss->ht_cap_offset); |
| |
| if (curr_bss->bcn_ht_oper) |
| curr_bss->bcn_ht_oper = (struct ieee80211_ht_operation *) |
| (curr_bss->beacon_buf + |
| curr_bss->ht_info_offset); |
| |
| if (curr_bss->bcn_vht_cap) |
| curr_bss->bcn_vht_cap = (void *)(curr_bss->beacon_buf + |
| curr_bss->vht_cap_offset); |
| |
| if (curr_bss->bcn_vht_oper) |
| curr_bss->bcn_vht_oper = (void *)(curr_bss->beacon_buf + |
| curr_bss->vht_info_offset); |
| |
| if (curr_bss->bcn_he_cap) |
| curr_bss->bcn_he_cap = (void *)(curr_bss->beacon_buf + |
| curr_bss->he_cap_offset); |
| |
| if (curr_bss->bcn_he_oper) |
| curr_bss->bcn_he_oper = (void *)(curr_bss->beacon_buf + |
| curr_bss->he_info_offset); |
| |
| if (curr_bss->bcn_bss_co_2040) |
| curr_bss->bcn_bss_co_2040 = |
| (curr_bss->beacon_buf + curr_bss->bss_co_2040_offset); |
| |
| if (curr_bss->bcn_ext_cap) |
| curr_bss->bcn_ext_cap = curr_bss->beacon_buf + |
| curr_bss->ext_cap_offset; |
| |
| if (curr_bss->oper_mode) |
| curr_bss->oper_mode = (void *)(curr_bss->beacon_buf + |
| curr_bss->oper_mode_offset); |
| } |
| |
| /* Free the beacon buffer in the current BSS descriptor. */ |
| void |
| nxpwifi_free_curr_bcn(struct nxpwifi_private *priv) |
| { |
| kfree(priv->curr_bcn_buf); |
| priv->curr_bcn_buf = NULL; |
| } |