| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * AMD Encrypted Register State Support |
| * |
| * Author: Joerg Roedel <jroedel@suse.de> |
| * |
| * This file is not compiled stand-alone. It contains code shared |
| * between the pre-decompression boot code and the running Linux kernel |
| * and is included directly into both code-bases. |
| */ |
| |
| #include <asm/setup_data.h> |
| |
| #ifndef __BOOT_COMPRESSED |
| #define error(v) pr_err(v) |
| #define has_cpuflag(f) boot_cpu_has(f) |
| #else |
| #undef WARN |
| #define WARN(condition, format...) (!!(condition)) |
| #undef vc_forward_exception |
| #define vc_forward_exception(c) panic("SNP: Hypervisor requested exception\n") |
| #endif |
| |
| /* |
| * SVSM related information: |
| * During boot, the page tables are set up as identity mapped and later |
| * changed to use kernel virtual addresses. Maintain separate virtual and |
| * physical addresses for the CAA to allow SVSM functions to be used during |
| * early boot, both with identity mapped virtual addresses and proper kernel |
| * virtual addresses. |
| */ |
| struct svsm_ca *boot_svsm_caa __ro_after_init; |
| u64 boot_svsm_caa_pa __ro_after_init; |
| |
| /* |
| * Since feature negotiation related variables are set early in the boot |
| * process they must reside in the .data section so as not to be zeroed |
| * out when the .bss section is later cleared. |
| * |
| * GHCB protocol version negotiated with the hypervisor. |
| */ |
| static u16 ghcb_version __ro_after_init; |
| |
| /* Copy of the SNP firmware's CPUID page. */ |
| static struct snp_cpuid_table cpuid_table_copy __ro_after_init; |
| |
| /* |
| * These will be initialized based on CPUID table so that non-present |
| * all-zero leaves (for sparse tables) can be differentiated from |
| * invalid/out-of-range leaves. This is needed since all-zero leaves |
| * still need to be post-processed. |
| */ |
| static u32 cpuid_std_range_max __ro_after_init; |
| static u32 cpuid_hyp_range_max __ro_after_init; |
| static u32 cpuid_ext_range_max __ro_after_init; |
| |
| bool __init sev_es_check_cpu_features(void) |
| { |
| if (!has_cpuflag(X86_FEATURE_RDRAND)) { |
| error("RDRAND instruction not supported - no trusted source of randomness available\n"); |
| return false; |
| } |
| |
| return true; |
| } |
| |
| void __head __noreturn |
| sev_es_terminate(unsigned int set, unsigned int reason) |
| { |
| u64 val = GHCB_MSR_TERM_REQ; |
| |
| /* Tell the hypervisor what went wrong. */ |
| val |= GHCB_SEV_TERM_REASON(set, reason); |
| |
| /* Request Guest Termination from Hypervisor */ |
| sev_es_wr_ghcb_msr(val); |
| VMGEXIT(); |
| |
| while (true) |
| asm volatile("hlt\n" : : : "memory"); |
| } |
| |
| /* |
| * The hypervisor features are available from GHCB version 2 onward. |
| */ |
| u64 get_hv_features(void) |
| { |
| u64 val; |
| |
| if (ghcb_version < 2) |
| return 0; |
| |
| sev_es_wr_ghcb_msr(GHCB_MSR_HV_FT_REQ); |
| VMGEXIT(); |
| |
| val = sev_es_rd_ghcb_msr(); |
| if (GHCB_RESP_CODE(val) != GHCB_MSR_HV_FT_RESP) |
| return 0; |
| |
| return GHCB_MSR_HV_FT_RESP_VAL(val); |
| } |
| |
| void snp_register_ghcb_early(unsigned long paddr) |
| { |
| unsigned long pfn = paddr >> PAGE_SHIFT; |
| u64 val; |
| |
| sev_es_wr_ghcb_msr(GHCB_MSR_REG_GPA_REQ_VAL(pfn)); |
| VMGEXIT(); |
| |
| val = sev_es_rd_ghcb_msr(); |
| |
| /* If the response GPA is not ours then abort the guest */ |
| if ((GHCB_RESP_CODE(val) != GHCB_MSR_REG_GPA_RESP) || |
| (GHCB_MSR_REG_GPA_RESP_VAL(val) != pfn)) |
| sev_es_terminate(SEV_TERM_SET_LINUX, GHCB_TERM_REGISTER); |
| } |
| |
| bool sev_es_negotiate_protocol(void) |
| { |
| u64 val; |
| |
| /* Do the GHCB protocol version negotiation */ |
| sev_es_wr_ghcb_msr(GHCB_MSR_SEV_INFO_REQ); |
| VMGEXIT(); |
| val = sev_es_rd_ghcb_msr(); |
| |
| if (GHCB_MSR_INFO(val) != GHCB_MSR_SEV_INFO_RESP) |
| return false; |
| |
| if (GHCB_MSR_PROTO_MAX(val) < GHCB_PROTOCOL_MIN || |
| GHCB_MSR_PROTO_MIN(val) > GHCB_PROTOCOL_MAX) |
| return false; |
| |
| ghcb_version = min_t(size_t, GHCB_MSR_PROTO_MAX(val), GHCB_PROTOCOL_MAX); |
| |
| return true; |
| } |
| |
| static enum es_result verify_exception_info(struct ghcb *ghcb, struct es_em_ctxt *ctxt) |
| { |
| u32 ret; |
| |
| ret = ghcb->save.sw_exit_info_1 & GENMASK_ULL(31, 0); |
| if (!ret) |
| return ES_OK; |
| |
| if (ret == 1) { |
| u64 info = ghcb->save.sw_exit_info_2; |
| unsigned long v = info & SVM_EVTINJ_VEC_MASK; |
| |
| /* Check if exception information from hypervisor is sane. */ |
| if ((info & SVM_EVTINJ_VALID) && |
| ((v == X86_TRAP_GP) || (v == X86_TRAP_UD)) && |
| ((info & SVM_EVTINJ_TYPE_MASK) == SVM_EVTINJ_TYPE_EXEPT)) { |
| ctxt->fi.vector = v; |
| |
| if (info & SVM_EVTINJ_VALID_ERR) |
| ctxt->fi.error_code = info >> 32; |
| |
| return ES_EXCEPTION; |
| } |
| } |
| |
| return ES_VMM_ERROR; |
| } |
| |
| static inline int svsm_process_result_codes(struct svsm_call *call) |
| { |
| switch (call->rax_out) { |
| case SVSM_SUCCESS: |
| return 0; |
| case SVSM_ERR_INCOMPLETE: |
| case SVSM_ERR_BUSY: |
| return -EAGAIN; |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| /* |
| * Issue a VMGEXIT to call the SVSM: |
| * - Load the SVSM register state (RAX, RCX, RDX, R8 and R9) |
| * - Set the CA call pending field to 1 |
| * - Issue VMGEXIT |
| * - Save the SVSM return register state (RAX, RCX, RDX, R8 and R9) |
| * - Perform atomic exchange of the CA call pending field |
| * |
| * - See the "Secure VM Service Module for SEV-SNP Guests" specification for |
| * details on the calling convention. |
| * - The calling convention loosely follows the Microsoft X64 calling |
| * convention by putting arguments in RCX, RDX, R8 and R9. |
| * - RAX specifies the SVSM protocol/callid as input and the return code |
| * as output. |
| */ |
| static __always_inline void svsm_issue_call(struct svsm_call *call, u8 *pending) |
| { |
| register unsigned long rax asm("rax") = call->rax; |
| register unsigned long rcx asm("rcx") = call->rcx; |
| register unsigned long rdx asm("rdx") = call->rdx; |
| register unsigned long r8 asm("r8") = call->r8; |
| register unsigned long r9 asm("r9") = call->r9; |
| |
| call->caa->call_pending = 1; |
| |
| asm volatile("rep; vmmcall\n\t" |
| : "+r" (rax), "+r" (rcx), "+r" (rdx), "+r" (r8), "+r" (r9) |
| : : "memory"); |
| |
| *pending = xchg(&call->caa->call_pending, *pending); |
| |
| call->rax_out = rax; |
| call->rcx_out = rcx; |
| call->rdx_out = rdx; |
| call->r8_out = r8; |
| call->r9_out = r9; |
| } |
| |
| static int svsm_perform_msr_protocol(struct svsm_call *call) |
| { |
| u8 pending = 0; |
| u64 val, resp; |
| |
| /* |
| * When using the MSR protocol, be sure to save and restore |
| * the current MSR value. |
| */ |
| val = sev_es_rd_ghcb_msr(); |
| |
| sev_es_wr_ghcb_msr(GHCB_MSR_VMPL_REQ_LEVEL(0)); |
| |
| svsm_issue_call(call, &pending); |
| |
| resp = sev_es_rd_ghcb_msr(); |
| |
| sev_es_wr_ghcb_msr(val); |
| |
| if (pending) |
| return -EINVAL; |
| |
| if (GHCB_RESP_CODE(resp) != GHCB_MSR_VMPL_RESP) |
| return -EINVAL; |
| |
| if (GHCB_MSR_VMPL_RESP_VAL(resp)) |
| return -EINVAL; |
| |
| return svsm_process_result_codes(call); |
| } |
| |
| static int svsm_perform_ghcb_protocol(struct ghcb *ghcb, struct svsm_call *call) |
| { |
| struct es_em_ctxt ctxt; |
| u8 pending = 0; |
| |
| vc_ghcb_invalidate(ghcb); |
| |
| /* |
| * Fill in protocol and format specifiers. This can be called very early |
| * in the boot, so use rip-relative references as needed. |
| */ |
| ghcb->protocol_version = ghcb_version; |
| ghcb->ghcb_usage = GHCB_DEFAULT_USAGE; |
| |
| ghcb_set_sw_exit_code(ghcb, SVM_VMGEXIT_SNP_RUN_VMPL); |
| ghcb_set_sw_exit_info_1(ghcb, 0); |
| ghcb_set_sw_exit_info_2(ghcb, 0); |
| |
| sev_es_wr_ghcb_msr(__pa(ghcb)); |
| |
| svsm_issue_call(call, &pending); |
| |
| if (pending) |
| return -EINVAL; |
| |
| switch (verify_exception_info(ghcb, &ctxt)) { |
| case ES_OK: |
| break; |
| case ES_EXCEPTION: |
| vc_forward_exception(&ctxt); |
| fallthrough; |
| default: |
| return -EINVAL; |
| } |
| |
| return svsm_process_result_codes(call); |
| } |
| |
| enum es_result sev_es_ghcb_hv_call(struct ghcb *ghcb, |
| struct es_em_ctxt *ctxt, |
| u64 exit_code, u64 exit_info_1, |
| u64 exit_info_2) |
| { |
| /* Fill in protocol and format specifiers */ |
| ghcb->protocol_version = ghcb_version; |
| ghcb->ghcb_usage = GHCB_DEFAULT_USAGE; |
| |
| ghcb_set_sw_exit_code(ghcb, exit_code); |
| ghcb_set_sw_exit_info_1(ghcb, exit_info_1); |
| ghcb_set_sw_exit_info_2(ghcb, exit_info_2); |
| |
| sev_es_wr_ghcb_msr(__pa(ghcb)); |
| VMGEXIT(); |
| |
| return verify_exception_info(ghcb, ctxt); |
| } |
| |
| static int __sev_cpuid_hv(u32 fn, int reg_idx, u32 *reg) |
| { |
| u64 val; |
| |
| sev_es_wr_ghcb_msr(GHCB_CPUID_REQ(fn, reg_idx)); |
| VMGEXIT(); |
| val = sev_es_rd_ghcb_msr(); |
| if (GHCB_RESP_CODE(val) != GHCB_MSR_CPUID_RESP) |
| return -EIO; |
| |
| *reg = (val >> 32); |
| |
| return 0; |
| } |
| |
| static int __sev_cpuid_hv_msr(struct cpuid_leaf *leaf) |
| { |
| int ret; |
| |
| /* |
| * MSR protocol does not support fetching non-zero subfunctions, but is |
| * sufficient to handle current early-boot cases. Should that change, |
| * make sure to report an error rather than ignoring the index and |
| * grabbing random values. If this issue arises in the future, handling |
| * can be added here to use GHCB-page protocol for cases that occur late |
| * enough in boot that GHCB page is available. |
| */ |
| if (cpuid_function_is_indexed(leaf->fn) && leaf->subfn) |
| return -EINVAL; |
| |
| ret = __sev_cpuid_hv(leaf->fn, GHCB_CPUID_REQ_EAX, &leaf->eax); |
| ret = ret ? : __sev_cpuid_hv(leaf->fn, GHCB_CPUID_REQ_EBX, &leaf->ebx); |
| ret = ret ? : __sev_cpuid_hv(leaf->fn, GHCB_CPUID_REQ_ECX, &leaf->ecx); |
| ret = ret ? : __sev_cpuid_hv(leaf->fn, GHCB_CPUID_REQ_EDX, &leaf->edx); |
| |
| return ret; |
| } |
| |
| static int __sev_cpuid_hv_ghcb(struct ghcb *ghcb, struct es_em_ctxt *ctxt, struct cpuid_leaf *leaf) |
| { |
| u32 cr4 = native_read_cr4(); |
| int ret; |
| |
| ghcb_set_rax(ghcb, leaf->fn); |
| ghcb_set_rcx(ghcb, leaf->subfn); |
| |
| if (cr4 & X86_CR4_OSXSAVE) |
| /* Safe to read xcr0 */ |
| ghcb_set_xcr0(ghcb, xgetbv(XCR_XFEATURE_ENABLED_MASK)); |
| else |
| /* xgetbv will cause #UD - use reset value for xcr0 */ |
| ghcb_set_xcr0(ghcb, 1); |
| |
| ret = sev_es_ghcb_hv_call(ghcb, ctxt, SVM_EXIT_CPUID, 0, 0); |
| if (ret != ES_OK) |
| return ret; |
| |
| if (!(ghcb_rax_is_valid(ghcb) && |
| ghcb_rbx_is_valid(ghcb) && |
| ghcb_rcx_is_valid(ghcb) && |
| ghcb_rdx_is_valid(ghcb))) |
| return ES_VMM_ERROR; |
| |
| leaf->eax = ghcb->save.rax; |
| leaf->ebx = ghcb->save.rbx; |
| leaf->ecx = ghcb->save.rcx; |
| leaf->edx = ghcb->save.rdx; |
| |
| return ES_OK; |
| } |
| |
| static int sev_cpuid_hv(struct ghcb *ghcb, struct es_em_ctxt *ctxt, struct cpuid_leaf *leaf) |
| { |
| return ghcb ? __sev_cpuid_hv_ghcb(ghcb, ctxt, leaf) |
| : __sev_cpuid_hv_msr(leaf); |
| } |
| |
| /* |
| * This may be called early while still running on the initial identity |
| * mapping. Use RIP-relative addressing to obtain the correct address |
| * while running with the initial identity mapping as well as the |
| * switch-over to kernel virtual addresses later. |
| */ |
| const struct snp_cpuid_table *snp_cpuid_get_table(void) |
| { |
| return rip_rel_ptr(&cpuid_table_copy); |
| } |
| |
| /* |
| * The SNP Firmware ABI, Revision 0.9, Section 7.1, details the use of |
| * XCR0_IN and XSS_IN to encode multiple versions of 0xD subfunctions 0 |
| * and 1 based on the corresponding features enabled by a particular |
| * combination of XCR0 and XSS registers so that a guest can look up the |
| * version corresponding to the features currently enabled in its XCR0/XSS |
| * registers. The only values that differ between these versions/table |
| * entries is the enabled XSAVE area size advertised via EBX. |
| * |
| * While hypervisors may choose to make use of this support, it is more |
| * robust/secure for a guest to simply find the entry corresponding to the |
| * base/legacy XSAVE area size (XCR0=1 or XCR0=3), and then calculate the |
| * XSAVE area size using subfunctions 2 through 64, as documented in APM |
| * Volume 3, Rev 3.31, Appendix E.3.8, which is what is done here. |
| * |
| * Since base/legacy XSAVE area size is documented as 0x240, use that value |
| * directly rather than relying on the base size in the CPUID table. |
| * |
| * Return: XSAVE area size on success, 0 otherwise. |
| */ |
| static u32 __head snp_cpuid_calc_xsave_size(u64 xfeatures_en, bool compacted) |
| { |
| const struct snp_cpuid_table *cpuid_table = snp_cpuid_get_table(); |
| u64 xfeatures_found = 0; |
| u32 xsave_size = 0x240; |
| int i; |
| |
| for (i = 0; i < cpuid_table->count; i++) { |
| const struct snp_cpuid_fn *e = &cpuid_table->fn[i]; |
| |
| if (!(e->eax_in == 0xD && e->ecx_in > 1 && e->ecx_in < 64)) |
| continue; |
| if (!(xfeatures_en & (BIT_ULL(e->ecx_in)))) |
| continue; |
| if (xfeatures_found & (BIT_ULL(e->ecx_in))) |
| continue; |
| |
| xfeatures_found |= (BIT_ULL(e->ecx_in)); |
| |
| if (compacted) |
| xsave_size += e->eax; |
| else |
| xsave_size = max(xsave_size, e->eax + e->ebx); |
| } |
| |
| /* |
| * Either the guest set unsupported XCR0/XSS bits, or the corresponding |
| * entries in the CPUID table were not present. This is not a valid |
| * state to be in. |
| */ |
| if (xfeatures_found != (xfeatures_en & GENMASK_ULL(63, 2))) |
| return 0; |
| |
| return xsave_size; |
| } |
| |
| static bool __head |
| snp_cpuid_get_validated_func(struct cpuid_leaf *leaf) |
| { |
| const struct snp_cpuid_table *cpuid_table = snp_cpuid_get_table(); |
| int i; |
| |
| for (i = 0; i < cpuid_table->count; i++) { |
| const struct snp_cpuid_fn *e = &cpuid_table->fn[i]; |
| |
| if (e->eax_in != leaf->fn) |
| continue; |
| |
| if (cpuid_function_is_indexed(leaf->fn) && e->ecx_in != leaf->subfn) |
| continue; |
| |
| /* |
| * For 0xD subfunctions 0 and 1, only use the entry corresponding |
| * to the base/legacy XSAVE area size (XCR0=1 or XCR0=3, XSS=0). |
| * See the comments above snp_cpuid_calc_xsave_size() for more |
| * details. |
| */ |
| if (e->eax_in == 0xD && (e->ecx_in == 0 || e->ecx_in == 1)) |
| if (!(e->xcr0_in == 1 || e->xcr0_in == 3) || e->xss_in) |
| continue; |
| |
| leaf->eax = e->eax; |
| leaf->ebx = e->ebx; |
| leaf->ecx = e->ecx; |
| leaf->edx = e->edx; |
| |
| return true; |
| } |
| |
| return false; |
| } |
| |
| static void snp_cpuid_hv(struct ghcb *ghcb, struct es_em_ctxt *ctxt, struct cpuid_leaf *leaf) |
| { |
| if (sev_cpuid_hv(ghcb, ctxt, leaf)) |
| sev_es_terminate(SEV_TERM_SET_LINUX, GHCB_TERM_CPUID_HV); |
| } |
| |
| static int __head |
| snp_cpuid_postprocess(struct ghcb *ghcb, struct es_em_ctxt *ctxt, |
| struct cpuid_leaf *leaf) |
| { |
| struct cpuid_leaf leaf_hv = *leaf; |
| |
| switch (leaf->fn) { |
| case 0x1: |
| snp_cpuid_hv(ghcb, ctxt, &leaf_hv); |
| |
| /* initial APIC ID */ |
| leaf->ebx = (leaf_hv.ebx & GENMASK(31, 24)) | (leaf->ebx & GENMASK(23, 0)); |
| /* APIC enabled bit */ |
| leaf->edx = (leaf_hv.edx & BIT(9)) | (leaf->edx & ~BIT(9)); |
| |
| /* OSXSAVE enabled bit */ |
| if (native_read_cr4() & X86_CR4_OSXSAVE) |
| leaf->ecx |= BIT(27); |
| break; |
| case 0x7: |
| /* OSPKE enabled bit */ |
| leaf->ecx &= ~BIT(4); |
| if (native_read_cr4() & X86_CR4_PKE) |
| leaf->ecx |= BIT(4); |
| break; |
| case 0xB: |
| leaf_hv.subfn = 0; |
| snp_cpuid_hv(ghcb, ctxt, &leaf_hv); |
| |
| /* extended APIC ID */ |
| leaf->edx = leaf_hv.edx; |
| break; |
| case 0xD: { |
| bool compacted = false; |
| u64 xcr0 = 1, xss = 0; |
| u32 xsave_size; |
| |
| if (leaf->subfn != 0 && leaf->subfn != 1) |
| return 0; |
| |
| if (native_read_cr4() & X86_CR4_OSXSAVE) |
| xcr0 = xgetbv(XCR_XFEATURE_ENABLED_MASK); |
| if (leaf->subfn == 1) { |
| /* Get XSS value if XSAVES is enabled. */ |
| if (leaf->eax & BIT(3)) { |
| unsigned long lo, hi; |
| |
| asm volatile("rdmsr" : "=a" (lo), "=d" (hi) |
| : "c" (MSR_IA32_XSS)); |
| xss = (hi << 32) | lo; |
| } |
| |
| /* |
| * The PPR and APM aren't clear on what size should be |
| * encoded in 0xD:0x1:EBX when compaction is not enabled |
| * by either XSAVEC (feature bit 1) or XSAVES (feature |
| * bit 3) since SNP-capable hardware has these feature |
| * bits fixed as 1. KVM sets it to 0 in this case, but |
| * to avoid this becoming an issue it's safer to simply |
| * treat this as unsupported for SNP guests. |
| */ |
| if (!(leaf->eax & (BIT(1) | BIT(3)))) |
| return -EINVAL; |
| |
| compacted = true; |
| } |
| |
| xsave_size = snp_cpuid_calc_xsave_size(xcr0 | xss, compacted); |
| if (!xsave_size) |
| return -EINVAL; |
| |
| leaf->ebx = xsave_size; |
| } |
| break; |
| case 0x8000001E: |
| snp_cpuid_hv(ghcb, ctxt, &leaf_hv); |
| |
| /* extended APIC ID */ |
| leaf->eax = leaf_hv.eax; |
| /* compute ID */ |
| leaf->ebx = (leaf->ebx & GENMASK(31, 8)) | (leaf_hv.ebx & GENMASK(7, 0)); |
| /* node ID */ |
| leaf->ecx = (leaf->ecx & GENMASK(31, 8)) | (leaf_hv.ecx & GENMASK(7, 0)); |
| break; |
| default: |
| /* No fix-ups needed, use values as-is. */ |
| break; |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * Returns -EOPNOTSUPP if feature not enabled. Any other non-zero return value |
| * should be treated as fatal by caller. |
| */ |
| int __head |
| snp_cpuid(struct ghcb *ghcb, struct es_em_ctxt *ctxt, struct cpuid_leaf *leaf) |
| { |
| const struct snp_cpuid_table *cpuid_table = snp_cpuid_get_table(); |
| |
| if (!cpuid_table->count) |
| return -EOPNOTSUPP; |
| |
| if (!snp_cpuid_get_validated_func(leaf)) { |
| /* |
| * Some hypervisors will avoid keeping track of CPUID entries |
| * where all values are zero, since they can be handled the |
| * same as out-of-range values (all-zero). This is useful here |
| * as well as it allows virtually all guest configurations to |
| * work using a single SNP CPUID table. |
| * |
| * To allow for this, there is a need to distinguish between |
| * out-of-range entries and in-range zero entries, since the |
| * CPUID table entries are only a template that may need to be |
| * augmented with additional values for things like |
| * CPU-specific information during post-processing. So if it's |
| * not in the table, set the values to zero. Then, if they are |
| * within a valid CPUID range, proceed with post-processing |
| * using zeros as the initial values. Otherwise, skip |
| * post-processing and just return zeros immediately. |
| */ |
| leaf->eax = leaf->ebx = leaf->ecx = leaf->edx = 0; |
| |
| /* Skip post-processing for out-of-range zero leafs. */ |
| if (!(leaf->fn <= cpuid_std_range_max || |
| (leaf->fn >= 0x40000000 && leaf->fn <= cpuid_hyp_range_max) || |
| (leaf->fn >= 0x80000000 && leaf->fn <= cpuid_ext_range_max))) |
| return 0; |
| } |
| |
| return snp_cpuid_postprocess(ghcb, ctxt, leaf); |
| } |
| |
| /* |
| * Boot VC Handler - This is the first VC handler during boot, there is no GHCB |
| * page yet, so it only supports the MSR based communication with the |
| * hypervisor and only the CPUID exit-code. |
| */ |
| void __head do_vc_no_ghcb(struct pt_regs *regs, unsigned long exit_code) |
| { |
| unsigned int subfn = lower_bits(regs->cx, 32); |
| unsigned int fn = lower_bits(regs->ax, 32); |
| u16 opcode = *(unsigned short *)regs->ip; |
| struct cpuid_leaf leaf; |
| int ret; |
| |
| /* Only CPUID is supported via MSR protocol */ |
| if (exit_code != SVM_EXIT_CPUID) |
| goto fail; |
| |
| /* Is it really a CPUID insn? */ |
| if (opcode != 0xa20f) |
| goto fail; |
| |
| leaf.fn = fn; |
| leaf.subfn = subfn; |
| |
| ret = snp_cpuid(NULL, NULL, &leaf); |
| if (!ret) |
| goto cpuid_done; |
| |
| if (ret != -EOPNOTSUPP) |
| goto fail; |
| |
| if (__sev_cpuid_hv_msr(&leaf)) |
| goto fail; |
| |
| cpuid_done: |
| regs->ax = leaf.eax; |
| regs->bx = leaf.ebx; |
| regs->cx = leaf.ecx; |
| regs->dx = leaf.edx; |
| |
| /* |
| * This is a VC handler and the #VC is only raised when SEV-ES is |
| * active, which means SEV must be active too. Do sanity checks on the |
| * CPUID results to make sure the hypervisor does not trick the kernel |
| * into the no-sev path. This could map sensitive data unencrypted and |
| * make it accessible to the hypervisor. |
| * |
| * In particular, check for: |
| * - Availability of CPUID leaf 0x8000001f |
| * - SEV CPUID bit. |
| * |
| * The hypervisor might still report the wrong C-bit position, but this |
| * can't be checked here. |
| */ |
| |
| if (fn == 0x80000000 && (regs->ax < 0x8000001f)) |
| /* SEV leaf check */ |
| goto fail; |
| else if ((fn == 0x8000001f && !(regs->ax & BIT(1)))) |
| /* SEV bit */ |
| goto fail; |
| |
| /* Skip over the CPUID two-byte opcode */ |
| regs->ip += 2; |
| |
| return; |
| |
| fail: |
| /* Terminate the guest */ |
| sev_es_terminate(SEV_TERM_SET_GEN, GHCB_SEV_ES_GEN_REQ); |
| } |
| |
| struct cc_setup_data { |
| struct setup_data header; |
| u32 cc_blob_address; |
| }; |
| |
| /* |
| * Search for a Confidential Computing blob passed in as a setup_data entry |
| * via the Linux Boot Protocol. |
| */ |
| static __head |
| struct cc_blob_sev_info *find_cc_blob_setup_data(struct boot_params *bp) |
| { |
| struct cc_setup_data *sd = NULL; |
| struct setup_data *hdr; |
| |
| hdr = (struct setup_data *)bp->hdr.setup_data; |
| |
| while (hdr) { |
| if (hdr->type == SETUP_CC_BLOB) { |
| sd = (struct cc_setup_data *)hdr; |
| return (struct cc_blob_sev_info *)(unsigned long)sd->cc_blob_address; |
| } |
| hdr = (struct setup_data *)hdr->next; |
| } |
| |
| return NULL; |
| } |
| |
| /* |
| * Initialize the kernel's copy of the SNP CPUID table, and set up the |
| * pointer that will be used to access it. |
| * |
| * Maintaining a direct mapping of the SNP CPUID table used by firmware would |
| * be possible as an alternative, but the approach is brittle since the |
| * mapping needs to be updated in sync with all the changes to virtual memory |
| * layout and related mapping facilities throughout the boot process. |
| */ |
| static void __head setup_cpuid_table(const struct cc_blob_sev_info *cc_info) |
| { |
| const struct snp_cpuid_table *cpuid_table_fw, *cpuid_table; |
| int i; |
| |
| if (!cc_info || !cc_info->cpuid_phys || cc_info->cpuid_len < PAGE_SIZE) |
| sev_es_terminate(SEV_TERM_SET_LINUX, GHCB_TERM_CPUID); |
| |
| cpuid_table_fw = (const struct snp_cpuid_table *)cc_info->cpuid_phys; |
| if (!cpuid_table_fw->count || cpuid_table_fw->count > SNP_CPUID_COUNT_MAX) |
| sev_es_terminate(SEV_TERM_SET_LINUX, GHCB_TERM_CPUID); |
| |
| cpuid_table = snp_cpuid_get_table(); |
| memcpy((void *)cpuid_table, cpuid_table_fw, sizeof(*cpuid_table)); |
| |
| /* Initialize CPUID ranges for range-checking. */ |
| for (i = 0; i < cpuid_table->count; i++) { |
| const struct snp_cpuid_fn *fn = &cpuid_table->fn[i]; |
| |
| if (fn->eax_in == 0x0) |
| cpuid_std_range_max = fn->eax; |
| else if (fn->eax_in == 0x40000000) |
| cpuid_hyp_range_max = fn->eax; |
| else if (fn->eax_in == 0x80000000) |
| cpuid_ext_range_max = fn->eax; |
| } |
| } |
| |
| static void __head svsm_pval_4k_page(unsigned long paddr, bool validate) |
| { |
| struct svsm_pvalidate_call *pc; |
| struct svsm_call call = {}; |
| unsigned long flags; |
| u64 pc_pa; |
| int ret; |
| |
| /* |
| * This can be called very early in the boot, use native functions in |
| * order to avoid paravirt issues. |
| */ |
| flags = native_local_irq_save(); |
| |
| call.caa = svsm_get_caa(); |
| |
| pc = (struct svsm_pvalidate_call *)call.caa->svsm_buffer; |
| pc_pa = svsm_get_caa_pa() + offsetof(struct svsm_ca, svsm_buffer); |
| |
| pc->num_entries = 1; |
| pc->cur_index = 0; |
| pc->entry[0].page_size = RMP_PG_SIZE_4K; |
| pc->entry[0].action = validate; |
| pc->entry[0].ignore_cf = 0; |
| pc->entry[0].pfn = paddr >> PAGE_SHIFT; |
| |
| /* Protocol 0, Call ID 1 */ |
| call.rax = SVSM_CORE_CALL(SVSM_CORE_PVALIDATE); |
| call.rcx = pc_pa; |
| |
| ret = svsm_perform_call_protocol(&call); |
| if (ret) |
| sev_es_terminate(SEV_TERM_SET_LINUX, GHCB_TERM_PVALIDATE); |
| |
| native_local_irq_restore(flags); |
| } |
| |
| static void __head pvalidate_4k_page(unsigned long vaddr, unsigned long paddr, |
| bool validate) |
| { |
| int ret; |
| |
| if (snp_vmpl) { |
| svsm_pval_4k_page(paddr, validate); |
| } else { |
| ret = pvalidate(vaddr, RMP_PG_SIZE_4K, validate); |
| if (ret) |
| sev_es_terminate(SEV_TERM_SET_LINUX, GHCB_TERM_PVALIDATE); |
| } |
| } |
| |
| /* |
| * Maintain the GPA of the SVSM Calling Area (CA) in order to utilize the SVSM |
| * services needed when not running in VMPL0. |
| */ |
| static bool __head svsm_setup_ca(const struct cc_blob_sev_info *cc_info) |
| { |
| struct snp_secrets_page *secrets_page; |
| struct snp_cpuid_table *cpuid_table; |
| unsigned int i; |
| u64 caa; |
| |
| BUILD_BUG_ON(sizeof(*secrets_page) != PAGE_SIZE); |
| |
| /* |
| * Check if running at VMPL0. |
| * |
| * Use RMPADJUST (see the rmpadjust() function for a description of what |
| * the instruction does) to update the VMPL1 permissions of a page. If |
| * the guest is running at VMPL0, this will succeed and implies there is |
| * no SVSM. If the guest is running at any other VMPL, this will fail. |
| * Linux SNP guests only ever run at a single VMPL level so permission mask |
| * changes of a lesser-privileged VMPL are a don't-care. |
| * |
| * Use a rip-relative reference to obtain the proper address, since this |
| * routine is running identity mapped when called, both by the decompressor |
| * code and the early kernel code. |
| */ |
| if (!rmpadjust((unsigned long)rip_rel_ptr(&boot_ghcb_page), RMP_PG_SIZE_4K, 1)) |
| return false; |
| |
| /* |
| * Not running at VMPL0, ensure everything has been properly supplied |
| * for running under an SVSM. |
| */ |
| if (!cc_info || !cc_info->secrets_phys || cc_info->secrets_len != PAGE_SIZE) |
| sev_es_terminate(SEV_TERM_SET_LINUX, GHCB_TERM_SECRETS_PAGE); |
| |
| secrets_page = (struct snp_secrets_page *)cc_info->secrets_phys; |
| if (!secrets_page->svsm_size) |
| sev_es_terminate(SEV_TERM_SET_LINUX, GHCB_TERM_NO_SVSM); |
| |
| if (!secrets_page->svsm_guest_vmpl) |
| sev_es_terminate(SEV_TERM_SET_LINUX, GHCB_TERM_SVSM_VMPL0); |
| |
| snp_vmpl = secrets_page->svsm_guest_vmpl; |
| |
| caa = secrets_page->svsm_caa; |
| |
| /* |
| * An open-coded PAGE_ALIGNED() in order to avoid including |
| * kernel-proper headers into the decompressor. |
| */ |
| if (caa & (PAGE_SIZE - 1)) |
| sev_es_terminate(SEV_TERM_SET_LINUX, GHCB_TERM_SVSM_CAA); |
| |
| /* |
| * The CA is identity mapped when this routine is called, both by the |
| * decompressor code and the early kernel code. |
| */ |
| boot_svsm_caa = (struct svsm_ca *)caa; |
| boot_svsm_caa_pa = caa; |
| |
| /* Advertise the SVSM presence via CPUID. */ |
| cpuid_table = (struct snp_cpuid_table *)snp_cpuid_get_table(); |
| for (i = 0; i < cpuid_table->count; i++) { |
| struct snp_cpuid_fn *fn = &cpuid_table->fn[i]; |
| |
| if (fn->eax_in == 0x8000001f) |
| fn->eax |= BIT(28); |
| } |
| |
| return true; |
| } |